Add as module parameters these options:
memory_backed
discard
mbps
cache_size
Previously these could only be set via configfs.
Still missing is bad_blocks.
The kernel test robot found a documentation formatting issue in v1 of
this patch.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
Link: https://lore.kernel.org/r/20220708174943.87787-2-vincent.fu@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The structure rnbd_srv_session maintains a list and an xarray of
rnbd_srv_dev. There is no need to keep both as one of them can serve the
purpose.
Since one of the places where the lookup of rnbd_srv_dev using
rnbd_srv_session is IO path, an xarray would serve us better than a list
traversal. Hence remove sess_dev_list from rnbd_srv_session, and replace
its uses from xarray.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20220707143122.460362-3-haris.iqbal@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After setting keep_id if the mutex trylock fails, the keep_id stays set
for the rest of the sess_dev lifetime.
Therefore, set keep_id to true after mutex_trylock succeeds, so that a
failure of trylock does'nt touch keep_id.
Fixes: b168e1d85c ("block/rnbd-srv: Prevent a deadlock generated by accessing sysfs in parallel")
Cc: gi-oh.kim@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20220707143122.460362-2-haris.iqbal@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Each authentication step is required to be completed within the
KATO interval (or two minutes if not set). So add a workqueue function
to reset the transaction ID and the expected next protocol step;
this will automatically the next authentication command referring
to the terminated authentication.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement Diffie-Hellman key exchange using FFDHE groups for NVMe
In-Band Authentication.
This patch adds a new host configfs attribute 'dhchap_dhgroup' to
select the FFDHE group to use.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement NVMe-oF In-Band authentication according to NVMe TPAR 8006.
This patch adds three additional configfs entries 'dhchap_key',
'dhchap_ctrl_key', and 'dhchap_hash' to the 'host' configfs directory.
The 'dhchap_key' and 'dhchap_ctrl_key' entries need to be in the ASCII
format as specified in NVMe Base Specification v2.0 section 8.13.5.8
'Secret representation'.
'dhchap_hash' defaults to 'hmac(sha256)', and can be written to to
switch to a different HMAC algorithm.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some fabrics commands can be sent via io queues, so add a new
function nvmet_parse_fabrics_io_cmd() and rename the existing
nvmet_parse_fabrics_cmd() to nvmet_parse_fabrics_admin_cmd().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement NVMe-oF In-Band authentication according to NVMe TPAR 8006.
This patch adds two new fabric options 'dhchap_secret' to specify the
pre-shared key (in ASCII respresentation according to NVMe 2.0 section
8.13.5.8 'Secret representation') and 'dhchap_ctrl_secret' to specify
the pre-shared controller key for bi-directional authentication of both
the host and the controller.
Re-authentication can be triggered by writing the PSK into the new
controller sysfs attribute 'dhchap_secret' or 'dhchap_ctrl_secret'.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[axboe: fold in clang build fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 'connect' command might fail with NVME_SC_AUTH_REQUIRED, so we
should be decoding this error, too.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add new definitions for NVMe In-band authentication as defined in
the NVMe Base Specification v2.0.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add RFC4648-compliant base64 encoding and decoding routines, based on
the base64url encoding in fs/crypto/fname.c.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add helper function to determine if a given key-agreement protocol
primitive is supported.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add helper function to determine if a given synchronous hash is supported.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A helper now exist, no need to open-code the same functionality.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only caller of the __nvme_submit_sync_cmd() with qid value not equal to
NVME_QID_ANY is nvmf_connect_io_queues(), where qid value is alway set
to > 0.
[1] __nvme_submit_sync_cmd() callers with qid parameter from :-
Caller | qid parameter
------------------------------------------------------
* nvme_fc_connect_io_queues() |
nvmf_connect_io_queue() | qid > 0
* nvme_rdma_start_io_queues() |
nvme_rdma_start_queue() |
nvmf_connect_io_queues() | qid > 0
* nvme_tcp_start_io_queues() |
nvme_tcp_start_queue() |
nvmf_connect_io_queues() | qid > 0
* nvme_loop_connect_io_queues() |
nvmf_connect_io_queues() | qid > 0
When qid value of the function parameter __nvme_submit_sync_cmd() is > 0
from above callers, we use blk_mq_alloc_request_hctx(), where we pass
last parameter as 0 if qid functional parameter value is set to 0 with
conditional operators, see 1002 :-
991 int __nvme_submit_sync_cmd(struct request_queue *q, struct nvme_command *cmd,
992 union nvme_result *result, void *buffer, unsigned bufflen,
993 int qid, int at_head, blk_mq_req_flags_t flags)
994 {
995 struct request *req;
996 int ret;
997
998 if (qid == NVME_QID_ANY)
999 req = blk_mq_alloc_request(q, nvme_req_op(cmd), flags);
1000 else
1001 req = blk_mq_alloc_request_hctx(q, nvme_req_op(cmd), flags,
1002 qid ? qid - 1 : 0);
1003
But qid function parameter value of the __nvme_submit_sync_cmd() will
never be 0 from above caller list see [1], and all the other callers of
__nvme_submit_sync_cmd() use NVME_QID_ANY as qid value :-
1. nvme_submit_sync_cmd()
2. nvme_features()
3. nvme_sec_submit()
4. nvmf_reg_read32()
5. nvmf_reg_read64()
6. nvmf_ref_write32()
7. nvmf_connect_admin_queue()
Remove the conditional operator to pass the qid as 0 in the call to
blk_mq_alloc_requst_hctx().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function __nvme_submit_sync_cmd() has following list of callers
that sets the timeout value to 0 :-
Callers | Timeout value
------------------------------------------------
nvme_submit_sync_cmd() | 0
nvme_features() | 0
nvme_sec_submit() | 0
nvmf_reg_read32() | 0
nvmf_reg_read64() | 0
nvmf_reg_write32() | 0
nvmf_connect_admin_queue() | 0
nvmf_connect_io_queue() | 0
Remove the timeout function parameter from __nvme_submit_sync_cmd() and
adjust the rest of code accordingly.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the NVM Express Revision 1.4 spec, Figure 145 describes possible
values for an AER with event type "Error" (value 000b). For a
Persistent Internal Error (value 03h), the host should perform a
controller reset.
Add support for this error using code that already exists for
doing a controller reset. As part of this support, introduce
two utility functions for parsing the AER type and subtype.
This new support was tested in a lab environment where we can
generate the persistent internal error on demand, and observe
both the Linux side and NVMe controller side to see that the
controller reset has been done.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let's change the parameter type to 'sector_t' then we don't need to cast
it from rnbd_clt_resize_dev_store, and update rnbd_clt_resize_disk too.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-8-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, process_msg_open_rsp checks if capacity changed or not before
call rnbd_clt_change_capacity while the checking also make sense for
rnbd_clt_resize_dev_store, let's move the checking into the function.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-7-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While at it, let re-arrange the struct to remove holes.
Before, pahole reports
/* size: 232, cachelines: 4, members: 17 */
/* sum members: 224, holes: 2, sum holes: 8 */
/* last cacheline: 40 bytes */
After the change, the report changes to
/* size: 224, cachelines: 4, members: 17 */
/* last cacheline: 32 bytes */
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-6-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Previously, both map and remap trigger rnbd_clt_set_dev_attr to set
some members in rnbd_clt_dev such as wc, fua and logical_block_size
etc, but those members are only useful for map scenario given the
setup_request_queue is only called from the path:
rnbd_clt_map_device -> rnbd_client_setup_device
Since rnbd_clt_map_device frees rsp after rnbd_client_setup_device,
we can pass rsp to rnbd_client_setup_device and it's callees, which
means queue's attributes can be set directly from relevant members
of rsp instead from rnbd_clt_dev.
After that, we can kill 11 members from rnbd_clt_dev, and we don't
need rnbd_clt_set_dev_attr either.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-5-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The member is not needed since we can call get_disk_ro to achieve the
same goal.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-4-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For map scenario, rsp is freed in two places:
1. msg_open_conf frees rsp if rtrs_clt_request returns 0.
2. Otherwise, rsp is freed by the call sites of rtrs_clt_request.
Now, We'd like to control full lifecycle of rsp in rnbd_clt_map_device,
with that, it is feasible to pass rsp to rnbd_client_setup_device in
next commit.
For 1, it is possible to free rsp from the caller of send_usr_msg
because of the synchronization of iu->comp.wait. And we put iu later
in rnbd_clt_map_device to ensure order of release rsp and iu.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-3-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let's open code it in rnbd_clt_map_device, then we can use information
from rsp to setup gendisk and request_queue in next commits. After that,
we can remove some members (wc, fua and max_hw_sectors etc) from struct
rnbd_clt_dev.
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220706133152.12058-2-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are 2 spelling mistakes in comments. Fix it.
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block layer defaults the maximum segments to 128, which means
requests tend to get split around the 512KB depending on how many
pages can be merged. There's no such restriction in the raid5 code
so increase the limit to USHRT_MAX so that larger requests can be
sent as one.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a debug print for raid5_make_request() so that each request is
printed and add the logical sector number to the debug print in
__add_stripe_bio().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
raid5_make_request() loops through every page in the request,
finds the appropriate stripe and adds the bio for that page in the
disk.
This causes a great deal of contention on the hash_lock and extra
work seeing each stripe must be found once for every data disk.
The number of times a stripe must be found can be reduced by pivoting
raid5_make_request() so that it loops through every stripe and then
loops through every disk in that stripe to see if the bio must be
added. This reduces the number of times the hash lock must be taken
by a factor equal to the number of data disks.
To accomplish this, the logical sectors that have already been added
must be tracked. Tracking them is done with a bitmap: the bits
for all pages are set at the start of the request and each bit
is cleared once the bio is added to a stripe.
Finding the next sector to be done is then just a call to
find_first_bit() so that sectors that have been done can simply be
skipped.
One minor downside is that the maximum sectors for a request must be
limited so that the bitmap can be appropriately sized on the stack.
This limit is arbitrarily chosen to be 256 stripe pages which works out
to 1MB if PAGE_SIZE == DEFAULT_STRIPE_SIZE. This doesn't actually
restrict the maximum request further seeing the default block queue
settings are used which restricts the number of segments to 128 (which
results in request sizes that are approximately 512KB).
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When testing if a previous stripe has had reshape expand past it, use
the earliest or latest logical sector in all the disks for that stripe
head. This will allow adding multiple disks at a time in a subesquent
patch.
To do this cleaner, refactor the check into a helper function called
stripe_ahead_of_reshape().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out two helper functions from add_stripe_bio(): one to check for
overlap (stripe_bio_overlaps()), and one to actually add the bio to the
stripe (__add_stripe_bio()). The latter function will always succeed.
This will be useful in the next patch so that overlap can be checked for
multiple disks before adding any
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When batching, every stripe head has to find the previous stripe head to
add to the batch list. This involves taking the hash lock which is
highly contended during IO.
Instead of finding the previous stripe_head each time, store a
reference to the previous stripe_head in a pointer so that it doesn't
require taking the contended lock another time.
The reference to the previous stripe must be released before scheduling
and waiting for work to get done. Otherwise, it can hold up
raid5_activate_delayed() and deadlock.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The for loop with retry label can be more cleanly expressed as a while
loop by moving the logical_sector increment into the success path.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that prepare_to_wait() isn't in the way, move read_sequcount_begin()
into make_stripe_request().
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
prepare_to_wait() can be reasonably called after schedule instead of
setting a flag and preparing in the next loop iteration.
This means that prepare_to_wait() will be called before
read_seqcount_begin(), but there shouldn't be any reason that the order
matters here. On the first iteration of the loop prepare_to_wait() is
already called first.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out the inner loop of raid5_make_request() into it's own helper
called make_stripe_request().
The helper returns a number of statuses: SUCCESS, RETRY,
SCHEDULE_AND_RETRY and FAIL. This makes the code a bit easier to
understand and allows the SCHEDULE_AND_RETRY path to be made common.
A context structure is added to contain do_flush. It will be used
more in subsequent patches for state that needs to be kept
outside the loop.
No functional changes intended. This will be cleaned up further in
subsequent patches to untangle the gen_lock and do_prepare logic
further.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both uses of find_stripe() require a fairly complicated dance to
increment the reference count. Move this into a common find_get_stripe()
helper.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
stripe_add_to_batch_list() is better done in the loop in make_request
instead of inside add_stripe_bio(). This is clearer and allows for
storing the batch_head state outside the loop in a subsequent patch.
The call to add_stripe_bio() in retry_aligned_read() is for read
and batching only applies to write. So it's impossible for batching
to happen at that call site.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Break immediately if raid5_get_active_stripe() returns NULL and deindent
the rest of the loop. Annotate this check with an unlikely().
This makes the code easier to read and reduces the indentation level.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are a few uses of an ugly ternary operator in raid5_make_request()
to check if a sector is a head of a reshape sector.
Factor this out into a simple helper called ahead_of_reshape().
No functional changes intended.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The check in raid5_make_request differs very slightly from the logic
that causes it to block lower down. This likely does not cause a bug
as the check is fuzzy anyway (as reshape may move on between the first
check and the subsequent check). However, make it consistent so it can
be cleaned up in a subsequent patch.
The condition which causes the schedule is:
!(mddev->reshape_backwards ? logical_sector < conf->reshape_progress :
logical_sector >= conf->reshape_progress) &&
(mddev->reshape_backwards ? logical_sector < conf->reshape_safe :
logical_sector >= conf->reshape_safe)
The condition that causes the early bailout is made to match this.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the bug which commit 8b48ec23cc ("md: don't unregister sync_thread
with reconfig_mutex held") fixed is related with action_store path, other
callers which reap sync_thread didn't need to be changed.
Let's pull md_unregister_thread from md_reap_sync_thread, then fix previous
bug with belows.
1. unlock mddev before md_reap_sync_thread in action_store.
2. save reshape_position before unlock, then restore it to ensure position
not changed accidentally by others.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Boot-time assembly of arrays with md= command-line arguments breaks when
CONFIG_BLOCK_LEGACY_AUTOLOAD is unset. md_setup_drive() in md-autodetect.c
calls blkdev_get_by_dev(), assuming this implicitly creates the block
device.
Fix this by attempting to md_alloc() the array first. As in the probe path,
ignore any error as failure is caught by blkdev_get_by_dev() anyway.
Signed-off-by: Chris Webb <chris@arachsys.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The mdadm test 07layouts randomly produces a kernel hung task deadlock.
The deadlock is caused by the suspend_lo/suspend_hi files being set by
the mdadm background process during reshape and not being cleared
because the process hangs. (Leaving aside the issue of the fragility of
freezing kernel tasks by buggy userspace processes...)
When the background mdadm process hangs it, is waiting (without a
timeout) on a change to the sync_completed file signalling that the
reshape has completed. The process is woken up a couple times when
the reshape finishes but it is woken up before MD_RECOVERY_RUNNING
is cleared so sync_completed_show() reports 0 instead of "none".
To fix this, notify the sysfs file in md_reap_sync_thread() after
MD_RECOVERY_RUNNING has been cleared. This wakes up mdadm and causes
it to continue and write to suspend_lo/suspend_hi to allow IO to
continue.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 07layouts test in mdadm fails on some systems. The failure
presents itself as the backup file not being removed before the next
layout is grown into:
mdadm: /dev/md0: cannot create backup file /tmp/md-test-backup:
File exists
This is because the background mdadm process, which is responsible for
cleaning up this backup file gets into an infinite loop waiting for
the reshape to start. mdadm checks the mdstat file if a reshape is
going and, if it is not, it waits for an event on the file or times
out in 5 seconds. On faster machines, the reshape may complete before
the 5 seconds times out, and thus the background mdadm process loops
waiting for a reshape to start that has already occurred.
mdadm reads the mdstat file to start, but mdstat does not report that the
reshape has begun, even though it has indeed begun. So the mdstat_wait()
call (in mdadm) which polls on the mdstat file won't ever return until
timing out.
The reason mdstat reports the reshape has started is due to an issue
in status_resync(). recovery_active is subtracted from curr_resync which
will result in a value of zero for the first chunk of reshaped data, and
the resulting read will report no reshape in progress.
To fix this, if "resync - recovery_active" is an overloaded value, force
the value to be MD_RESYNC_ACTIVE so the code reports a resync in progress.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Comments in the code document special values used for
mddev->curr_resync. Make this clearer by using an enum to label these
values.
The only functional change is a couple places use the wrong comparison
operator that implied 3 is another special value. They are all
fixed to imply that 3 or greater is an active resync.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
radix_tree_lookup_slot() and radix_tree_replace_slot() API expect the
slot returned and looked up to be marked with __rcu. Otherwise
sparse warnings are generated:
drivers/md/raid5-cache.c:2939:23: warning: incorrect type in
assignment (different address spaces)
drivers/md/raid5-cache.c:2939:23: expected void **pslot
drivers/md/raid5-cache.c:2939:23: got void [noderef] __rcu **
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>