system/linux
system/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux synced 2024-10-20 02:09:15 +00:00
Code Issues Packages Projects Releases Wiki Activity
linux/drivers/net/dsa/ocelot/felix.h

72 lines
2.4 KiB
C
Raw Normal View History

net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 15:03:30 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
net: update NXP copyright text NXP Legal insists that the following are not fine: - Saying "NXP Semiconductors" instead of "NXP", since the company's registered name is "NXP" - Putting a "(c)" sign in the copyright string - Putting a comma in the copyright string The only accepted copyright string format is "Copyright <year-range> NXP". This patch changes the copyright headers in the networking files that were sent by me, or derived from code sent by me. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-17 11:17:35 +00:00
/* Copyright 2019 NXP
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 15:03:30 +00:00
*/
#ifndef _MSCC_FELIX_H
#define _MSCC_FELIX_H
#define ocelot_to_felix(o) container_of((o), struct felix, ocelot)
net: mscc: ocelot: convert to phylink The felix DSA driver, which is a wrapper over the same hardware class as ocelot, is integrated with phylink, but ocelot is using the plain PHY library. It makes sense to bring together the two implementations, which is what this patch achieves. This is a large patch and hard to break up, but it does the following: The existing ocelot_adjust_link writes some registers, and felix_phylink_mac_link_up writes some registers, some of them are common, but both functions write to some registers to which the other doesn't. The main reasons for this are: - Felix switches so far have used an NXP PCS so they had no need to write the PCS1G registers that ocelot_adjust_link writes - Felix switches have the MAC fixed at 1G, so some of the MAC speed changes actually break the link and must be avoided. The naming conventions for the functions introduced in this patch are: - vsc7514_phylink_{mac_config,validate} are specific to the Ocelot instantiations and placed in ocelot_net.c which is built only for the ocelot switchdev driver. - ocelot_phylink_mac_link_{up,down} are shared between the ocelot switchdev driver and the felix DSA driver (they are put in the common lib). One by one, the registers written by ocelot_adjust_link are: DEV_MAC_MODE_CFG - felix_phylink_mac_link_up had no need to write this register since its out-of-reset value was fine and did not need changing. The write is moved to the common ocelot_phylink_mac_link_up and on felix it is guarded by a quirk bit that makes the written value identical with the out-of-reset one DEV_PORT_MISC - runtime invariant, was moved to vsc7514_phylink_mac_config PCS1G_MODE_CFG - same as above PCS1G_SD_CFG - same as above PCS1G_CFG - same as above PCS1G_ANEG_CFG - same as above PCS1G_LB_CFG - same as above DEV_MAC_ENA_CFG - both ocelot_adjust_link and ocelot_port_disable touched this. felix_phylink_mac_link_{up,down} also do. We go with what felix does and put it in ocelot_phylink_mac_link_up. DEV_CLOCK_CFG - ocelot_adjust_link and felix_phylink_mac_link_up both write this, but to different values. Move to the common ocelot_phylink_mac_link_up and make sure via the quirk that the old values are preserved for both. ANA_PFC_PFC_CFG - ocelot_adjust_link wrote this, felix_phylink_mac_link_up did not. Runtime invariant, speed does not matter since PFC is disabled via the RX_PFC_ENA bits which are cleared. Move to vsc7514_phylink_mac_config. QSYS_SWITCH_PORT_MODE_PORT_ENA - both ocelot_adjust_link and felix_phylink_mac_link_{up,down} wrote this. Ocelot also wrote this register from ocelot_port_disable. Keep what felix did, move in ocelot_phylink_mac_link_{up,down} and delete ocelot_port_disable. ANA_POL_FLOWC - same as above SYS_MAC_FC_CFG - same as above, except slight behavior change. Whereas ocelot always enabled RX and TX flow control, felix listened to phylink (for the most part, at least - see the 2500base-X comment). The registers which only felix_phylink_mac_link_up wrote are: SYS_PAUSE_CFG_PAUSE_ENA - this is why I am not sure that flow control worked on ocelot. Not it should, since the code is shared with felix where it does. ANA_PORT_PORT_CFG - this is a Frame Analyzer block register, phylink should be the one touching them, deleted. Other changes: - The old phylib registration code was in mscc_ocelot_init_ports. It is hard to work with 2 levels of indentation already in, and with hard to follow teardown logic. The new phylink registration code was moved inside ocelot_probe_port(), right between alloc_etherdev() and register_netdev(). It could not be done before (=> outside of) ocelot_probe_port() because ocelot_probe_port() allocates the struct ocelot_port which we then use to assign ocelot_port->phy_mode to. It is more preferable to me to have all PHY handling logic inside the same function. - On the same topic: struct ocelot_port_private :: serdes is only used in ocelot_port_open to set the SERDES protocol to Ethernet. This is logically a runtime invariant and can be done just once, when the port registers with phylink. We therefore don't even need to keep the serdes reference inside struct ocelot_port_private, or to use the devm variant of of_phy_get(). - Phylink needs a valid phy-mode for phylink_create() to succeed, and the existing device tree bindings in arch/mips/boot/dts/mscc/ocelot_pcb120.dts don't define one for the internal PHY ports. So we patch PHY_INTERFACE_MODE_NA into PHY_INTERFACE_MODE_INTERNAL. - There was a strategically placed: switch (priv->phy_mode) { case PHY_INTERFACE_MODE_NA: continue; which made the code skip the serdes initialization for the internal PHY ports. Frankly that is not all that obvious, so now we explicitly initialize the serdes under an "if" condition and not rely on code jumps, so everything is clearer. - There was a write of OCELOT_SPEED_1000 to DEV_CLOCK_CFG for QSGMII ports. Since that is in fact the default value for the register field DEV_CLOCK_CFG_LINK_SPEED, I can only guess the intention was to clear the adjacent fields, MAC_TX_RST and MAC_RX_RST, aka take the port out of reset, which does match the comment. I don't even want to know why this code is placed there, but if there is indeed an issue that all ports that share a QSGMII lane must all be up, then this logic is already buggy, since mscc_ocelot_init_ports iterates using for_each_available_child_of_node, so nobody prevents the user from putting a 'status = "disabled";' for some QSGMII ports which would break the driver's assumption. In any case, in the eventuality that I'm right, we would have yet another issue if ocelot_phylink_mac_link_down would reset those ports and that would be forbidden, so since the ocelot_adjust_link logic did not do that (maybe for a reason), add another quirk to preserve the old logic. The ocelot driver teardown goes through all ports in one fell swoop. When initialization of one port fails, the ocelot->ports[port] pointer for that is reset to NULL, and teardown is done only for non-NULL ports, so there is no reason to do partial teardowns, let the central mscc_ocelot_release_ports() do its job. Tested bind, unbind, rebind, link up, link down, speed change on mock-up hardware (modified the driver to probe on Felix VSC9959). Also regression tested the felix DSA driver. Could not test the Ocelot specific bits (PCS1G, SERDES, device tree bindings). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-15 01:47:48 +00:00
#define FELIX_MAC_QUIRKS OCELOT_QUIRK_PCS_PERFORMS_RATE_ADAPTATION
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 15:03:30 +00:00
/* Platform-specific information */
struct felix_info {
felix: Fix initialization of ioremap resources The caller of devm_ioremap_resource(), either accidentally or by wrong assumption, is writing back derived resource data to global static resource initialization tables that should have been constant. Meaning that after it computes the final physical start address it saves the address for no reason in the static tables. This doesn't affect the first driver probing after reboot, but it breaks consecutive driver reloads (i.e. driver unbind & bind) because the initialization tables no longer have the correct initial values. So the next probe() will map the device registers to wrong physical addresses, causing ARM SError async exceptions. This patch fixes all of the above. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22 08:54:34 +00:00
const struct resource *target_io_res;
const struct resource *port_io_res;
const struct resource *imdio_res;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 15:03:30 +00:00
const struct reg_field *regfields;
const u32 *const *map;
const struct ocelot_ops *ops;
net: dsa: ocelot: the MAC table on Felix is twice as large When running 'bridge fdb dump' on Felix, sometimes learnt and static MAC addresses would appear, sometimes they wouldn't. Turns out, the MAC table has 4096 entries on VSC7514 (Ocelot) and 8192 entries on VSC9959 (Felix), so the existing code from the Ocelot common library only dumped half of Felix's MAC table. They are both organized as a 4-way set-associative TCAM, so we just need a single variable indicating the correct number of rows. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-03 22:20:26 +00:00
int num_mact_rows;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 15:03:30 +00:00
const struct ocelot_stat_layout *stats_layout;
unsigned int num_stats;
int num_ports;
net: dsa: felix: replace tabs with spaces Over the time, some patches have introduced structures aligned with spaces, near structures aligned with tabs. Fix the inconsistencies. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 10:57:49 +00:00
int num_tx_queues;
net: mscc: ocelot: automatically detect VCAP constants The numbers in struct vcap_props are not intuitive to derive, because they are not a straightforward copy-and-paste from the reference manual but instead rely on a fairly detailed level of understanding of the layout of an entry in the TCAM and in the action RAM. For this reason, bugs are very easy to introduce here. Ease the work of hardware porters and read from hardware the constants that were exported for this particular purpose. Note that this implies that struct vcap_props can no longer be const. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29 22:27:26 +00:00
struct vcap_props *vcap;
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 01:34:17 +00:00
int switch_pci_bar;
int imdio_pci_bar;
net: dsa: felix: move the PTP clock structure to felix_vsc9959.c Not only does Sevile not have a PTP clock, but with separate modules, this structure cannot even live in felix.c, due to the .owner = THIS_MODULE assignment causing this link time error: drivers/net/dsa/ocelot/felix.o:(.data+0x0): undefined reference to `__this_module' Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 10:57:52 +00:00
const struct ptp_clock_info *ptp_caps;
net: dsa: felix: setup MMIO filtering rules for PTP when using tag_8021q Since the tag_8021q tagger is software-defined, it has no means by itself for retrieving hardware timestamps of PTP event messages. Because we do want to support PTP on ocelot even with tag_8021q, we need to use the CPU port module for that. The RX timestamp is present in the Extraction Frame Header. And because we can't use NPI mode which redirects the CPU queues to an "external CPU" (meaning the ARM CPU running Linux), then we need to poll the CPU port module through the MMIO registers to retrieve TX and RX timestamps. Sadly, on NXP LS1028A, the Felix switch was integrated into the SoC without wiring the extraction IRQ line to the ARM GIC. So, if we want to be notified of any PTP packets received on the CPU port module, we have a problem. There is a possible workaround, which is to use the Ethernet CPU port as a notification channel that packets are available on the CPU port module as well. When a PTP packet is received by the DSA tagger (without timestamp, of course), we go to the CPU extraction queues, poll for it there, then we drop the original Ethernet packet and masquerade the packet retrieved over MMIO (plus the timestamp) as the original when we inject it up the stack. Create a quirk in struct felix is selected by the Felix driver (but not by Seville, since that doesn't support PTP at all). We want to do this such that the workaround is minimally invasive for future switches that don't require this workaround. The only traffic for which we need timestamps is PTP traffic, so add a redirection rule to the CPU port module for this. Currently we only have the need for PTP over L2, so redirection rules for UDP ports 319 and 320 are TBD for now. Note that for the workaround of matching of PTP-over-Ethernet-port with PTP-over-MMIO queues to work properly, both channels need to be absolutely lossless. There are two parts to achieving that: - We keep flow control enabled on the tag_8021q CPU port - We put the DSA master interface in promiscuous mode, so it will never drop a PTP frame (for the profiles we are interested in, these are sent to the multicast MAC addresses of 01-80-c2-00-00-0e and 01-1b-19-00-00-00). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13 22:38:00 +00:00
/* Some Ocelot switches are integrated into the SoC without the
* extraction IRQ line connected to the ARM GIC. By enabling this
* workaround, the few packets that are delivered to the CPU port
* module (currently only PTP) are copied not only to the hardware CPU
* port module, but also to the 802.1Q Ethernet CPU port, and polling
* the extraction registers is triggered once the DSA tagger sees a PTP
* frame. The Ethernet frame is only used as a notification: it is
* dropped, and the original frame is extracted over MMIO and annotated
* with the RX timestamp.
*/
bool quirk_no_xtr_irq;
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 01:34:17 +00:00
int (*mdio_bus_alloc)(struct ocelot *ocelot);
void (*mdio_bus_free)(struct ocelot *ocelot);
net: dsa: felix: move probing to felix_vsc9959.c Felix is not actually meant to be a DSA driver only for the switch inside NXP LS1028A, but an umbrella for all Vitesse / Microsemi / Microchip switches that are register-compatible with Ocelot and that are using in DSA mode (with an NPI Ethernet port). For the dsa_switch_ops exported by the felix driver to be generic enough to be used by other non-PCI switches, we need to move the PCI-specific probing to the low-level translation module felix_vsc9959.c. This way, other switches can have their own probing functions, as platform devices or otherwise. This patch also removes the "Felix instance table", which did not stand the test of time and is unnecessary at this point. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13 16:57:09 +00:00
void (*phylink_validate)(struct ocelot *ocelot, int port,
unsigned long *supported,
struct phylink_link_state *state);
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 01:34:17 +00:00
int (*prevalidate_phy_mode)(struct ocelot *ocelot, int port,
phy_interface_t phy_mode);
net: dsa: felix: Configure Time-Aware Scheduler via taprio offload Ocelot VSC9959 switch supports time-based egress shaping in hardware according to IEEE 802.1Qbv. This patch add support for TAS configuration on egress port of VSC9959 switch. Felix driver is an instance of Ocelot family, with a DSA front-end. The patch uses tc taprio hardware offload to setup TAS set function on felix driver. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13 02:25:09 +00:00
int (*port_setup_tc)(struct dsa_switch *ds, int port,
enum tc_setup_type type, void *type_data);
void (*port_sched_speed_set)(struct ocelot *ocelot, int port,
u32 speed);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 15:03:30 +00:00
};
net: dsa: felix: move probing to felix_vsc9959.c Felix is not actually meant to be a DSA driver only for the switch inside NXP LS1028A, but an umbrella for all Vitesse / Microsemi / Microchip switches that are register-compatible with Ocelot and that are using in DSA mode (with an NPI Ethernet port). For the dsa_switch_ops exported by the felix driver to be generic enough to be used by other non-PCI switches, we need to move the PCI-specific probing to the low-level translation module felix_vsc9959.c. This way, other switches can have their own probing functions, as platform devices or otherwise. This patch also removes the "Felix instance table", which did not stand the test of time and is unnecessary at this point. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13 16:57:09 +00:00
extern const struct dsa_switch_ops felix_switch_ops;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 15:03:30 +00:00
/* DSA glue / front-end for struct ocelot */
struct felix {
struct dsa_switch *ds;
net: dsa: felix: move probing to felix_vsc9959.c Felix is not actually meant to be a DSA driver only for the switch inside NXP LS1028A, but an umbrella for all Vitesse / Microsemi / Microchip switches that are register-compatible with Ocelot and that are using in DSA mode (with an NPI Ethernet port). For the dsa_switch_ops exported by the felix driver to be generic enough to be used by other non-PCI switches, we need to move the PCI-specific probing to the low-level translation module felix_vsc9959.c. This way, other switches can have their own probing functions, as platform devices or otherwise. This patch also removes the "Felix instance table", which did not stand the test of time and is unnecessary at this point. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13 16:57:09 +00:00
const struct felix_info *info;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 15:03:30 +00:00
struct ocelot ocelot;
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 01:34:17 +00:00
struct mii_bus *imdio;
net: dsa: ocelot: use the Lynx PCS helpers in Felix and Seville Use the helper functions introduced by the newly added Lynx PCS MDIO module in the Felix VSC9959 and Seville VSC9953. Instead of representing the PCS as a phy_device, a mdio_device structure will be passed to the Lynx module which is now actually implementing all the PCS configuration and status reporting. All code previously used for PCS monitoring and runtime configuration is removed and replaced will calls to the Lynx PCS operations. Tested on the following SERDES protocols of LS1028A: 0x7777 (2500Base-X), 0x85bb (QSGMII), 0x9999 (SGMII) and 0x13bb (USXGMII). Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-30 08:34:02 +00:00
struct lynx_pcs **pcs;
net: dsa: felix: move probing to felix_vsc9959.c Felix is not actually meant to be a DSA driver only for the switch inside NXP LS1028A, but an umbrella for all Vitesse / Microsemi / Microchip switches that are register-compatible with Ocelot and that are using in DSA mode (with an NPI Ethernet port). For the dsa_switch_ops exported by the felix driver to be generic enough to be used by other non-PCI switches, we need to move the PCI-specific probing to the low-level translation module felix_vsc9959.c. This way, other switches can have their own probing functions, as platform devices or otherwise. This patch also removes the "Felix instance table", which did not stand the test of time and is unnecessary at this point. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13 16:57:09 +00:00
resource_size_t switch_base;
resource_size_t imdio_base;
net: dsa: felix: convert to the new .change_tag_protocol DSA API In expectation of the new tag_ocelot_8021q tagger implementation, we need to be able to do runtime switchover between one tagger and another. So we must structure the existing code for the current NPI-based tagger in a certain way. We move the felix_npi_port_init function in expectation of the future driver configuration necessary for tag_ocelot_8021q: we would like to not have the NPI-related bits interspersed with the tag_8021q bits. The conversion from this: ocelot_write_rix(ocelot, ANA_PGID_PGID_PGID(GENMASK(ocelot->num_phys_ports, 0)), ANA_PGID_PGID, PGID_UC); to this: cpu_flood = ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports)); ocelot_rmw_rix(ocelot, cpu_flood, cpu_flood, ANA_PGID_PGID, PGID_UC); is perhaps non-trivial, but is nonetheless non-functional. The PGID_UC (replicator for unknown unicast) is already configured out of hardware reset to flood to all ports except ocelot->num_phys_ports (the CPU port module). All we change is that we use a read-modify-write to only add the CPU port module to the unknown unicast replicator, as opposed to doing a full write to the register. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29 01:00:07 +00:00
enum dsa_tag_protocol tag_proto;
net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib Michael reported that when using the "ocelot-8021q" tagging protocol, the switch driver module must be manually loaded before the tagging protocol can be loaded/is available. This appears to be the same problem described here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ where due to the fact that DSA tagging protocols make use of symbols exported by the switch drivers, circular dependencies appear and this breaks module autoloading. The ocelot_8021q driver needs the ocelot_can_inject() and ocelot_port_inject_frame() functions from the switch library. Previously the wrong approach was taken to solve that dependency: shims were provided for the case where the ocelot switch library was compiled out, but that turns out to be insufficient, because the dependency when the switch lib _is_ compiled is problematic too. We cannot declare ocelot_can_inject() and ocelot_port_inject_frame() as static inline functions, because these access I/O functions like __ocelot_write_ix() which is called by ocelot_write_rix(). Making those static inline basically means exposing the whole guts of the ocelot switch library, not ideal... We already have one tagging protocol driver which calls into the switch driver during xmit but not using any exported symbol: sja1105_defer_xmit. We can do the same thing here: create a kthread worker and one work item per skb, and let the switch driver itself do the register accesses to send the skb, and then consume it. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12 11:40:41 +00:00
struct kthread_worker *xmit_worker;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 15:03:30 +00:00
};
net: mscc: ocelot: introduce conversion helpers between port and netdev Since the mscc_ocelot_switch_lib is common between a pure switchdev and a DSA driver, the procedure of retrieving a net_device for a certain port index differs, as those are registered by their individual front-ends. Up to now that has been dealt with by always passing the port index to the switch library, but now, we're going to need to work with net_device pointers from the tc-flower offload, for things like indev, or mirred. It is not desirable to refactor that, so let's make sure that the flower offload core has the ability to translate between a net_device and a port index properly. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02 12:02:21 +00:00
struct net_device *felix_port_to_netdev(struct ocelot *ocelot, int port);
int felix_netdev_to_port(struct net_device *dev);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 15:03:30 +00:00
#endif
Reference in a new issue Copy permalink