periodic(8) run, taken from uname(1) '-U' and '-K'
flags.
Reviewed by: allanjude, dvl
Differential Revision: https://reviews.freebsd.org/D1541
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Implement a subset of the multiboot specification in order to boot Xen
and a FreeBSD Dom0 from the FreeBSD bootloader. This multiboot
implementation is tailored to boot Xen and FreeBSD Dom0, and it will
most surely fail to boot any other multiboot compilant kernel.
In order to detect and boot the Xen microkernel, two new file formats
are added to the bootloader, multiboot and multiboot_obj. Multiboot
support must be tested before regular ELF support, since Xen is a
multiboot kernel that also uses ELF. After a multiboot kernel is
detected, all the other loaded kernels/modules are parsed by the
multiboot_obj format.
The layout of the loaded objects in memory is the following; first the
Xen kernel is loaded as a 32bit ELF into memory (Xen will switch to
long mode by itself), after that the FreeBSD kernel is loaded as a RAW
file (Xen will parse and load it using it's internal ELF loader), and
finally the metadata and the modules are loaded using the native
FreeBSD way. After everything is loaded we jump into Xen's entry point
using a small trampoline. The order of the multiboot modules passed to
Xen is the following, the first module is the RAW FreeBSD kernel, and
the second module is the metadata and the FreeBSD modules.
Since Xen will relocate the memory position of the second
multiboot module (the one that contains the metadata and native
FreeBSD modules), we need to stash the original modulep address inside
of the metadata itself in order to recalculate its position once
booted. This also means the metadata must come before the loaded
modules, so after loading the FreeBSD kernel a portion of memory is
reserved in order to place the metadata before booting.
In order to tell the loader to boot Xen and then the FreeBSD kernel the
following has to be added to the /boot/loader.conf file:
xen_cmdline="dom0_mem=1024M dom0_max_vcpus=2 dom0pvh=1 console=com1,vga"
xen_kernel="/boot/xen"
The first argument contains the command line that will be passed to the Xen
kernel, while the second argument is the path to the Xen kernel itself. This
can also be done manually from the loader command line, by for example
typing the following set of commands:
OK unload
OK load /boot/xen dom0_mem=1024M dom0_max_vcpus=2 dom0pvh=1 console=com1,vga
OK load kernel
OK load zfs
OK load if_tap
OK load ...
OK boot
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D517
For the Forth bits:
Submitted by: Julien Grall <julien.grall AT citrix.com>
- Close a migration race where callout_reset() failed to set the
CALLOUT_ACTIVE flag.
- Callout callback functions are now allowed to be protected by
spinlocks.
- Switching the callout CPU number cannot always be done on a
per-callout basis. See the updated timeout(9) manual page for more
information.
- The timeout(9) manual page has been updated to reflect how all the
functions inside the callout API are working. The manual page has
been made function oriented to make it easier to deduce how each of
the functions making up the callout API are working without having
to first read the whole manual page. Group all functions into a
handful of sections which should give a quick top-level overview
when the different functions should be used.
- The CALLOUT_SHAREDLOCK flag and its functionality has been removed
to reduce the complexity in the callout code and to avoid problems
about atomically stopping callouts via callout_stop(). If someone
needs it, it can be re-added. From my quick grep there are no
CALLOUT_SHAREDLOCK clients in the kernel.
- A new callout API function named "callout_drain_async()" has been
added. See the updated timeout(9) manual page for a complete
description.
- Update the callout clients in the "kern/" folder to use the callout
API properly, like cv_timedwait(). Previously there was some custom
sleepqueue code in the callout subsystem, which has been removed,
because we now allow callouts to be protected by spinlocks. This
allows us to tear down the callout like done with regular mutexes,
and a "td_slpmutex" has been added to "struct thread" to atomically
teardown the "td_slpcallout". Further the "TDF_TIMOFAIL" and
"SWT_SLEEPQTIMO" states can now be completely removed. Currently
they are marked as available and will be cleaned up in a follow up
commit.
- Bump the __FreeBSD_version to indicate kernel modules need
recompilation.
- There has been several reports that this patch "seems to squash a
serious bug leading to a callout timeout and panic".
Kernel build testing: all architectures were built
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D1438
Sponsored by: Mellanox Technologies
Reviewed by: jhb, adrian, sbruno and emaste
While in theory this should have been a transparent change (and was for all
other drivers), cpsw(4) never used the proper accessor macros in a few
places but spelt the indirect m_hdr.mh_* out itself. Convert those to
use m_len and m_data and unbreak the driver build.
associating an optional PNP hint table with this module. In the
future, when these are added, these changes will silently ignore the
new type they would otherwise warn about. It will always be safe to
ignore this data. Get this into the builds today for some future
proofing.
MFC After: 3 days
only compile in those options in GENERIC that cannot be loaded as
modules. ufs is still included because many of its options aren't
present in the kernel module. There's some other exceptions documented
in the file. This is part of some work to get more things
automatically loading in the hopes of obsoleting GENERIC one day.
more generally make it easier to extend 'struct mbuf in the future', make
a number of changes to the data structure:
- As we anticipate embedding mbufs headers within variable-size regions of
memory in the future, change the definitions of byte arrays embedded in
mbufs to be of size [0] rather than [MLEN] and [MHLEN]. In fact, the
cxgbe driver already uses 'struct mbuf' on the front of other storage
sizes, but we would like the global mbuf allocator do be able to do this
as well.
- Fold 'struct m_hdr' into 'struct mbuf' itself, eliminating a set of
macros that aliased 'mh_foo' field names to 'm_foo' names such as
'm_next'. These present a particular problem as we would like to add
new mbuf-header fields -- e.g., 'm_size' -- that, if similarly named via
macros, would introduce collisions with many other variable names in the
kernel.
- Rename 'struct m_ext' to 'struct struct_m_ext' so that we can add
compile-time assertions without bumping into the still-extant 'm_ext'
macro.
- Remove the MSIZE compile-time assertion for 'struct mbuf', but add new
assertions for alignment of embedded data arrays (64-bit alignment even
on 32-bit platforms), and for the sizes the mbuf header, packet header,
and m_ext structure.
- Document that these assertions exist in comments in mbuf.h.
This change is not intended to cause (non-trivial) behavioural
differences, but is a precursor to further mbuf-allocator work.
Differential Revision: https://reviews.freebsd.org/D1483
Reviewed by: bz, gnn, np, glebius ("go ahead, I trust you")
Sponsored by: EMC / Isilon Storage Division
sanitizer sources. It is apparently unnecessary, and causes trouble for
people using WITHOUT_IPFILTER.
Reported by: Pawel Biernacki <pawel.biernacki@gmail.com>, Kurt Lidl <lidl@pix.net>
"delist_dev()" function. Make sure the character device structure
doesn't go away until the end of the "destroy_dev()" function due to
concurrently running cleanup code inside "devfs_populate()".
MFC after: 1 week
Reported by: dchagin@
According to ELF ABI, alignment 0 and 1 has the same meaning: the
section has no alignment constraints.
PR: 196715
Sponsored by: The FreeBSD Foundation
This makes sure that file descriptors of opened directories will
actually get these capabilities. Without this change, bindat() and
connectat() don't seem to work for me.
MFC after: 2 weeks
Reviewed by: rwatson, pjd
go back through HASWELL, IVY_BRIDGE, IVY_BRIDGE_XEON and SANDY_BRIDGE
to straighten out all the missing PMCs. We also add a new pmc tool
pmcstudy, this allows one to run the various formulas from
the documents "Using Intel Vtune Amplifier XE on XXX Generation platforms" for
IB/SB and Haswell. The tool also allows one to postulate your own
formulas with any of the various PMC's. At some point I will enahance
this to work with Brendan Gregg's flame-graphs so we can flamegraph
various PMC interactions. Note the manual page also needs some
work (lots of work) but gnn has committed to help me with that ;-)
Reviewed by: gnn
MFC after:1 month
Sponsored by: Netflix Inc.
Previous throttling implementation approached problem from the wrong side.
It significantly limited useful delaying of TRIM requests and aggregation
potential, while not so much controlled TRIM burstiness under heavy load.
With this change random 4K write benchmarks (probably the worst case for
TRIM) show me IOPS increase by 20%, average latency reduction by 30%, peak
TRIM bursts reduction by 3 times and same peak TRIM map size (memory usage).
Also the new logic does not force map size down so heavily, really allowing
to keep deleted data for 32 TXG or 30 seconds under moderate load. It was
practically impossible with old throttling logic, which pushed map down to
only 64 segments.
Reviewed by: smh
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
can suspend / resume and unload / load cbb and cardbus without errors
on my Lenovo T400, which wasn't possible before. Cards suspending
and resuming in the CardBus slot not yet tested.
o Enable memory cycles to the bridge early (as part of the new
cbb_pci_bridge_init). This fixes the Bad VCC errors which were
caused by the code accessing the device registers with this
cleared. The suspend / resume process clears it.
o Refactor suspend / resume into bus specific code (though the ISA
code is just stubbed). This isn't strictly necessary, but makes
the initializaiton code more uniform and should be more bullet
proof in the face of variant behavior among cardbus bridges.
o Fixup comments in the power-up sequence to reflect reality. These
comments were written for one regime of power-up, but not updated
as things were revised.
o Add a paranoid small delay (100ms) to cover noisy cards powering
down.
o Fix some debugging prints to be easier to grep from dmesg.
Sponsored by: Netflix
would be picked up for kernel builds, it isn't picked up for
old-fashioned builds. Without this option, PCI bus numbers are busted
for modules build iteratively.
VM_INJECT_EXCEPTION ioctl. However it morphed into other uses like keeping
track pending exceptions for a vcpu. This in turn causes confusion because
some fields in 'struct vm_exception' like 'vcpuid' make sense only in the
ioctl context. It also makes it harder to add or remove structure fields.
Fix this by using 'struct vm_exception' only to communicate information
from userspace to vmm.ko when injecting an exception.
Also, add a field 'restart_instruction' to 'struct vm_exception'. This
field is set to '1' for exceptions where the faulting instruction is
restarted after the exception is handled.
MFC after: 1 week
stable/10 cannot be built from FreeBSD 8.x. This is because the
build-tools stage requires libmagic, but lib/libmagic/config.h was
generated on head, and it now enables using the xlocale.h APIs, which
are not supported on 8.x (and on 9.x before __FreeBSD_version 900506).
See also the start of this thread on -stable:
https://lists.freebsd.org/pipermail/freebsd-stable/2015-January/081521.html
To fix this, conditionalize the use of xlocale.h APIs to make
bootstrapping from older FreeBSD versions work correctly.
Reviewed by: delphij
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1518
contains the libraries for Address Sanitizer (asan), Undefined Behavior
Sanitizer (ubsan) and Profile Guided Optimization.
ASan is a fast memory error detector. It can detect the following types
of bugs:
Out-of-bounds accesses to heap, stack and globals
Use-after-free
Use-after-return (to some extent)
Double-free, invalid free
Memory leaks (experimental)
Typical slowdown introduced by AddressSanitizer is 2x.
UBSan is a fast and compatible undefined behavior checker. It enables a
number of undefined behavior checks that have small runtime cost and no
impact on address space layout or ABI.
PLEASE NOTE: the sanitizers still have some rough edges on FreeBSD,
particularly on i386. These will hopefully be smoothed out in the
coming time.
Differential Revision: https://reviews.freebsd.org/D1505
simultaneously detaching kernel drivers on the same USB device we can
get stuck in the "usb_wait_pending_ref_locked()" function because the
conditions needed for allowing detach are not met. The "destroy_dev()"
function waits for all system calls involving the given character
device to return. Character device system calls may lock the USB
enumeration lock, which is also held when "destroy_dev()" is
called. This can sometimes lead to a deadlock not noticed by
WITNESS. The current solution is to ensure the calling thread is the
only one holding the USB enumeration lock and prevent other threads
from getting refs while a USB device detach is ongoing. This turned
out not to be sufficient. To solve this deadlock we could use
"destroy_dev_sched()" to schedule the device destruction in the
background, but then we don't know when it is safe to free() the
private data of the character device. Instead a callback function is
executed by the USB explore process to kill off any leftover USB
character devices synchronously after the USB device explore code is
finished and the USB enumeration lock is no longer locked. This makes
porting easier and also ensures us that character devices must
eventually go away after a USB device detach.
While at it ensure that "flag_iserror" is only written when "priv_mtx"
is locked, which is protecting it.
MFC after: 5 days
