This is better behavior than just silently doing the wrong thing. We do not
currently have plans to support -r/-R with the compression-enabled greps.
Reported by: jilles
Include source files and drivers for Marvell ArmadaXP and Armada38X
in GENERIC kernel config.
Submitted by: Michal Mazur <mkm@semihalf.com>
Rafal Kozik <rk@semihalf.com>
Reviewed by: manu
Tested by: manu
Obtained from: Semihalf
Sponsored by: Stormshield
Marvell SoC identification function was called by SYSINIT on all armv7
platforms, which brakes platforms other than Marvell built with
GENERIC config. Fix this by shifting SoC identifying to Marvell platform
initialization.
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: manu
Tested by: manu
Obtained from: Semihalf
Sponsored by: Stormshield
Remove line about allowed flags. It was missing 'pRTY' and is duplicative
of the man page. It didn't describe the flags in any detail to help
remind users of how to configure newsylog.
As with Clang, build our toolchain components by default when the host
compiler is capable of doing so, to make them available for testing and
experimentation.
Sponsored by: The FreeBSD Foundation
is too big for the outgoing interface and no firewall is involed.
This problem was introduced in
https://svnweb.freebsd.org/changeset/base/324996
Thanks to Irene Ruengeler for finding the bug and testing the fix.
Reviewed by: kp@
MFC after: 3 days
Remove sys/modules/ixgb and add the linked man page for if_ixgb via
ObsoleteFiles.
Submitted by: kbowling
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15273
This patch adds two missing LIST_INIT()s. Found by inspection.
In practice, these are currently no-ops, since the structure they are
in is malloc'd with M_ZERO and all LIST_INIT does is set the pointer
in the list head to NULL. (In other words, the M_ZERO has already
correctly initialized it.)
MFC after: 2 months
According to the 802.1Q-2014 9.6 VLAN Tag Control Information, VID value 0
means that there is no VLAN tag assigned to the packet, and only PCP and
DEI values from the tag are meaningful. Current flow table programming
filter out such packets.
When programming VLAN filter for flow table, unconditionally add rule which
accept packets with VLAN id 0. The packets are already handled correctly
by the network stack.
Reviewed by: hselasky, slavash
Sponsored by: Mellanox Technologies
MFC after: 1 week
Admin pass-through requests took controller lock before the queue lock,
but in case of request submission to a failed controller controller lock
was taken after the queue lock. Fix that by reducing the lock scopes and
switching to mtx_pool locks to track pass-through request completion.
Sponsored by: iXsystems, Inc.
r332839 changed number of cells per interrupt for local_intc from 1 to 2
to pass type of IRQ. Driver expected only 1 cell so after r332839
all interrupt children of local_intc failed to allocate IRQ resource.
Fix this regression by relaxing check for number of cells in interrupt
property to be either 1 or 2.
PR: 227904
Multicast incorrectly calls in to drivers with a mutex held causing drivers
to have to go through all manner of contortions to use a non sleepable lock.
Serialize multicast updates instead.
Submitted by: mmacy <mmacy@mattmacy.io>
Reviewed by: shurd, sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14969
A large number of devices don't support PCIe FLR, in particular
graphics adapters. Use PCI power management to perform the
reset if FLR fails or isn't available, by cycling the device
through the D3 state.
This has been tested by a number of users with Nvidia and AMD GPUs.
Submitted and tested by: Matt Macy
Reviewed by: jhb, imp, rgrimes
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15268
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
Current interface to the gntdev in FreeBSD is wrong, and mostly worked
out of luck before the PTI FreeBSD fixes, when kernel and user-space
where sharing the same page tables.
On FreeBSD ioctls have the size of the passed struct encoded in the
ioctl number, because the generic ioctl handler in the OS takes care
of copying the data from user-space to kernel space, and then calls
the device specific ioctl handler. Thus using ioctl structs with
variable sizes is not possible.
The fix is to turn the array of structs at the end of
ioctl_gntdev_alloc_gref and ioctl_gntdev_map_grant_ref into pointers,
that can be properly accessed from the kernel gntdev driver using the
copyin/copyout functions. Note that this is exactly how it's done for
the privcmd driver.
Sponsored by: Citrix Systems R&D
These match GNU cmp(1) for compatibility where applicable.
Future work might implement the -i option from GNU cmp(1) to express skip
either in terms of both files or of the form "SKIP1:SKIP2" rather than
specifying them as additional arguments to cmp(1).
MFC after: 1 month
a 1500 line switch statement. Callers now specify a discrete completion
handler, though they're still welcome to track state via ccb_state.
Sponsored by: Netflix
pointer. It's now unhelpful and misleading for callers to continue to set
it, so bring all callers into conformance. There's no real functional change,
but it makes reading the code a lot less confusing.
Sponsored by: Netflix
Refresh upstream driver before impending conversion to iflib.
Major changes:
- Support for descriptor writeback mode (required by ixlv(4) for AVF support)
- Ability to disable firmware LLDP agent by user (PR 221530)
- Fix for TX queue hang when using TSO (PR 221919)
- Separate descriptor ring sizes for TX and RX rings
PR: 221530, 221919
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: #IntelNetworking
MFC after: 1 day
Relnotes: Yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D14985
Dumpers may wish to print messages from an initialization hook; this
change ensures that such messages aren't mixed with output from the
generic dump code.
MFC after: 1 week
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license. Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).
Reviewed by: rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15245
always use 'M. Warner Losh' for consistency.
'All Rights Reserved.' was prescribed by the Buenos Aires Copyright
Convention of 1910, but has been mostly dead since the early 1990's
and completely meaningless since 2000 when Nicaragua ratified the
Berne convention.
Some files not done due to ambiguity of various types.
This commit adds a new debug server to bhyve. Unlike the existing -g
option which provides an efficient connection to a debug server
running in the guest OS, this debug server permits inspection and
control of the guest from within the hypervisor itself without
requiring any cooperation from the guest. It is similar to the debug
server provided by qemu.
To avoid conflicting with the existing -g option, a new -G option has
been added that accepts a TCP port. An IPv4 socket is bound to this
port and listens for connections from debuggers. In addition, if the
port begins with the character 'w', the hypervisor will pause the
guest at the first instruction until a debugger attaches and
explicitly continues the guest. Note that only a single debugger can
attach to a guest at a time.
Virtual CPUs are exposed to the remote debugger as threads. General
purpose register values can be read for each virtual CPU. Other
registers cannot currently be read, and no register values can be
changed by the debugger.
The remote debugger can read guest memory but not write to guest
memory. To facilitate source-level debugging of the guest, memory
addresses from the debugger are treated as virtual addresses (rather
than physical addresses) and are resolved to a physical address using
the active virtual address translation of the current virtual CPU.
Memory reads should honor memory mapped I/O regions, though the debug
server does not attempt to honor any alignment or size constraints
when accessing MMIO.
The debug server provides limited support for controlling the guest.
The guest is suspended when a debugger is attached and resumes when a
debugger detaches. A debugger can suspend a guest by sending a Ctrl-C
request (e.g. via Ctrl-C in GDB). A debugger can also continue a
suspended guest while remaining attached. Breakpoints are not yet
supported. Single stepping is supported on Intel CPUs that support
MTRAP VM exits, but is not available on other systems.
While the current debug server has limited functionality, it should
at least be usable for basic debugging now. It is also a useful
checkpoint to serve as a base for adding additional features.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D15022
Filter work requests are submitted in the nexus cdev's ioctl which then
blocks waiting for a reply. If driver detach runs in this state and
disables interrupts the ioctl will never complete and detach will hang
in destroy_cdev.
Sponsored by: Chelsio Communications
Move the allwinner early printf support to the snps driver as it
should work with all implementation.
While here add instruction for enabling it on 64bits SoCs.
This is a prequisite before we remove the driver from -current.
Reviewed by: emaste kbowling imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D15244
This code caused more problems than it should have fixed (boot failures) on
the machines I tested, so has been commented out for a while now. Remove
it, and assume the errata fixups were done by the bootloader where they
belong.
pwd_mkdb has emitted v4 password database records since 2003 (r113596)
in addition to v3, and as of r283981 by default it emitted only v4.
As described in r283981, retire the -l legacy option.
The -B and -L options were originally added to set the endianness of v3
records emitted by pwd_mkdb, but they also set the db hash endiannes and
so have been retained temporarily.
Announced on the FreeBSD-Current and FreeBSD-Stable lists. In stable/11
the man page contains a deprecation notice, and pwd_mkdb will emit a
deprecation notice if the -l option is specified.
Reviewed by: delphij, lidl, rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15144
