rc.d/hostid_save saves a UUID generated by rc.d/hostid in /etc/hostid.
Store the same UUID, without hyphens, in /etc/machine-id. The hypĥens
are removed with a shell function because hostid_save runs before file
systems are mounted so other tools may not be available yet.
This eliminates some duplication between hostid and machine-id and for
virtual machines machine-id now contains the UUID configured in the
hypervisor like it does on Linux.
Reviewed by: delphij
Discussed with: bapt
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D38811
The growfs_fstab script has been testing dumpdev, and if it is AUTO,
enables dumps on the newly-added swap device for the initial boot.
However, dumpdev defaults to AUTO on main, but NO on stable/13 and
release branches. On the other hand, bsdinstall adds dumpdev="AUTO"
by default (controlled by a menu item). bsdinstall is not used when
booting an SD card or other disk image. Adopt the default from
bsdinstall, and set dumpdev to AUTO in /etc/rc.conf in the
growfs_fstab script if a swap partition has been added, along with
the explanatory comment added by bsdinstall.
Differential Revision: https://reviews.freebsd.org/D38751
Use it instead of defining IN_RTLD by base sources that want P_OSREL_
defines in userspace, but are not rtld.
This allows to remove abuse of IN_RTLD from userspace.
Reviewed by: dchagin, markj, imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D38585
The cleanvar script uses find -delete to remove stale files under /var,
which could lead to unwanted removal of files in some unusual scenarios.
For example, when a mounted fdescfs(5) is present under /var/run/samba/fd,
find(1) could descend into a directory that is out of /var/run and remove
files that should not be removed.
To mitigate this, modify the script to use find -x, which restricts the
find scope to one file system only instead of descending into mounted
file systems.
PR: 269213
MFC after: 1 week
Changing cursor, screenmap and setting blanktime doesn't work when booted
with vt(4) and UEFI so add a special case for those depending on machdep.bootmethods.
I have no way to test if this can work with vt(4) and bios boot so just in case
keep calling those for this.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38293
Make it possible to not run utx at boot.
Default to yes so this is a no-op for everyone.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38292
And put in it:
- kbdcontrol
- vidcontrol
- moused
- kbdmap
Those aren't useful in a jail or for a modern desktop.
While here, split the devd.conf part into some new files.
Reviewed by: bapt
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38321
Remove the hard-coded dependency on HYPERV being only x86. Instead, 100%
rely on MK_HYPERV. It's always right (since it's marked BROKEN (so set
to "no") on architectures we don't support).
Sponsored by: Netflix
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D38306
There's no separate man page for dma.conf, but the format is documented
in dma.8.
Reviewed by: bapt
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37944
After the removal of ia64 and sparc64, all current architectures
support executable stacks at an architectural level.
This reverts commit 1290d38ac5.
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D37904
- awk sometimes formatted swapbase as floating point, which gpart
does not accept; force int.
- Fix typo in code for checking vm.max_swap_pages.
- While here, do not set kernel env if "gpart add" fails.
- Add "gpart show" before modification to verbose output.
Reported by: marklmi at yahoo dot com
Tested by: marklmi at yahoo dot com
When setting up carp tunnel, using a password consisting of only the
characters used as hexadecimal characters, i.e. abc-def, there will be
an infinite loop in the shell function ifalias_af_common_handler().
To circumvent this we test for " pass ".
PR: 268378
Reported by: jyoung15@gmail.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D37748
"[[:space:]]" is easier to read than "\ " and is conisitent with
clone_up().
Reported by: eugen
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D37748
Pass `-vv` to pytest in order to always get the full output.
While here, enforce the modeline.
Differential Revision: https://reviews.freebsd.org/D37894
MFC after: 2 weeks
This new default-enabled rc will generate a /etc/machine-id file if it
does not exist, and pre-fill it with a newly generated UUID of version 4
[2].
The file is generated in /var/db/machine-id and symlinked to
/etc/machine-id to allow for read-only root partitions.
This file is amongst other things used by libraries like GLib.
Bump FreeBSD version 1400076 to be able to easily add support for older
version of FreeBSD via a package.
[1] Linux machine-id(5): https://www.man7.org/linux/man-pages/man5/machine-id.5.html
[2] f176fe8e7f
Approved by: bapt
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D37722
Add comments analogous to those that are in the sendmail mailer.conf,
including a pointer to /usr/share/examples/sendmail/mailer.conf.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D37711
Add new growfs_swap_size variable with a default value of the empty
string, along with comments on other settings. Used by the growfs
script.
Differential Revision: https://reviews.freebsd.org/D37464
The growfs_fstab script is a helper for the growfs script to add any
new swap partition to /etc/fstab on first boot. If growfs adds a
swap partition, it sets growfs_swap_pdev in the kenv. In this case,
after the root file system is read/write, if there is no swap partition
in the fstab, growfs_fstab adds growfs_swap as a swap partition to the
fstab. Also, it runs dumpon to add the swap partition (as this
happened earlier in the startup sequence).
Discussed with: cperciva
Differential Revision: https://reviews.freebsd.org/D37463
Add the ability to create a swap partition in the course of growing
the root file system on first boot, enabling by default. The default
rules are: add swap if the disk is at least 15 GB (decimal), and the
existing root is less than 40% of the disk. The default size is 10%
of the disk, but is limited by the memory size. The limit is twice
memory size up to 4 GB, 8 GB up to 8 GB memory, and memory size over
8 GB memory. Swap size is clamped at vm.swap_maxpages/2 as well.
The new swap partition is labeled as "growfs_swap".
The default behavior can be overridden by setting growfs_swap_size in
/etc/rc.conf or in the kernel environment, with kenv taking priority.
A value of 0 inhibits the addition of swap, an empty value specifies
the default, and other values indicate a swap size in bytes.
By default, addition of swap is inhibited if a swap partition is found
in the output of the sysctl kern.geom.conftxt before the current root
partition, usually meaning that there is another disk present.
Swap space is not added if one is already present in /etc/fstab.
The root partition is read-only when growfs runs, so /etc/fstab can
not be modified. That step is handled by a new growfs_fstab script,
added in a separate commit. Set the value "growfs_swap_pdev" in kenv
to indicate that this should be done, as well as for internal use.
There is optional verbose output meant for debugging; it can only be
enabled by modifying the script (in two places, for sh and awk).
This should be removed before release, after testing on -current.
Discussed with: cperciva
Reviewed by: imp (previous version)
Differential Revision: https://reviews.freebsd.org/D37462
The NONE parameter has been deprecated for more than 20 years
but was never removed, its useful to simplify the sendmail
management.
This reverts commit 7cadc52638.
GCC 12 defaults to C++17 which removes (not just deprecates)
std::auto_ptr<>. Trying to use CXXSTD of c++03 doesn't work with
libc++ headers, but c++11 does.
Reviewed by: brooks, imp, emaste
Differential Revision: https://reviews.freebsd.org/D37531
The main difference with the chown in luaposix, is that it checks
and reports if a user or a group do exist when a string is passed
as arguments
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D37479
GCC warns about the non-literal format string passed to strftime(). A
warning here seems a bit odd as strftime() does not take varargs so
there is not a risk of missing args.
As PF now also supports dummynet but can not configure it on its own,
the service which configures pipes, queues and schedulers is needed.
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D37451
othermta (along with mta_start_script configuration entry in rc.conf)
was a mechanism used to be able to run another mta than sendmail(8) before
"rcng" time 20 years ago.
othermta has not been used since.
similar to the same token in glibc.
Requested and reviewed by: bapt
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D37329
dma accepts mail from a local Mail User Agent (MUA) and delivers it
locally or to a smarthost for delivery. dma does not accept inbound
mail (i.e., it does not listen on port 25) and is not intended to
provide the same functionality as a full MTA like postfix or sendmail.
It is intended for use cases such as delivering cron(8) mail. which
is the default configuration and usage of sendmail in the default
setup of the base system.
In order to switch the default from sendmail to dma, we teach
mailwrapper to fallback on dma directly if the mailer.conf file cannot
be opened.
We install by default a mailer.conf file which points at dma
We install a mailer.conf file for sendmail in the examples.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D37035
If a zpool is created by makefs(8), its version is 5000, i.e., all
feature flags are off. Introduce an rc script to run `zpool upgrade`
over the assigned zpools on the first boot. This is useful to the
ZFS based VM images built from release(7).
Reviewed by: imp, markj, mav
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37282
* Avoid unnecessary use of `unsigned char *`
* Use explicit casts when assigning `unsigned char *` to `char *` or vice versa
* Drop unused global variables (and fix memory leak in `gettable()`)
* Use `snprintf()` instead of `strcpy()` + `strcat()`
* Drop spurious braces in switch
Sponsored by: Klara, Inc.
Obtained from: Apple OSS Distributions (in part)
Differential Revision: https://reviews.freebsd.org/D37263
Mostly remove from the SEE ALSO section, adding a mention of the port
where not removed. Elsewhere, remove as appropriate and change from .Xr
to .Nm where a mention of telnetd continues to make sense (or removing
it would require significant reworking of the surrounding text).
Reviewed by: imp, delphij, emaste
Differential Revision: https://reviews.freebsd.org/D36785
The telnetd codebase is unmaintained and has a number of quality
issues. Telnet has been largely supplanted by ssh. If needed, a port is
available (net/freebsd-telnetd), but a more maintained implementation
should be prefered.
While the telnet client suffers from the same issues, it is deemed
to be of lower risk and is required to connect to legacy devices, so
it remains.
Reviewed by: emaste, imp
Differential Revision: https://reviews.freebsd.org/D36620
for the default output. For '-a' (per-object needed printout) the
[preloaded] banner is kept.
Instead, use special format2 for printing the preloaded objects (and
vdso), which does not include DT_NEEDED, since there is no object
needing the printed one.
In this way, the output is more compatible with glibc.
Example:
LD_PRELOAD=/lib/libthr.so.3 LD_TRACE_LOADED_OBJECTS=1 /libexec/ld-elf.so.1 /bin/ls
libutil.so.9 => /lib/libutil.so.9 (0x801099000)
libncursesw.so.9 => /lib/libncursesw.so.9 (0x8010b0000)
libc.so.7 => /lib/libc.so.7 (0x801123000)
[vdso] (0x7ffffffff000)
/lib/libthr.so.3 (0x80106c000)
Note the absense of the part before and including '=>' for preloaded
libthr.so.3, and for vdso.
PR: 265750
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D36616
The "shutdown" keyword invokes rcorder with the -k flag, for rc scripts
with the keyword at shutdown.
Reported by: bdrewery
Fixes: 27b9777c28
MFC after: 3 days
Differential Revision:
Users with a tmpfs /var/run will lose the directory tree state of
/var/run at reboot. This rc script will optionally (by default)
capture the state of the directory structure in /var/run prior to
shutdown and recreate it at system boot.
Alternatively a user can save the state of the /var/run directories
manually using service var_run save and disable the autosaving of
/var/run state using the var_run_autosave variable, for those
paranoid SSD users.
PR: 259585, 259699
Reported by: freebsd@walstatt-de.de,
Reviewed by: philip, gbe (previous version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36386
Rtld locks from libthr defer signals delivery, which means that binding
is not possible while a signal handler is executed.
Binding might upgrade read-locked rtld_bind_lock to write-lock, if
symbol resolution requires loading filters. If a signal would be delivered
while rtld is in read-locked section, and signal handler needs binding
which upgrades the lock, for non-threaded image that uses default rtld
locks, we get the rtld data structures modified under the top-level
active rtld frame.
To correct the problem, mask signals for read-locking of default locks
in addition to the write-locking. It is very cheap now with
sigfastblock(2).
Note that the global state is used to track pre-locked state of either
sigfastblock(2) or signal mask (if sigfastblock(2) is administratively
disabled). It is fine for non-threaded images since there are no other
threads. But I believe that it is fine for threaded images using libc_r
as well, since masking signals disables preemption (I did not tested
it).
NetBSD PR: https://gnats.netbsd.org/56979
Reported by: tmunro
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D36396
Certain configurations need to use a different path for pidfile.
Allow rc.conf to overwrite it.
Reviewed by: cy, 0mp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D36141
None of tools working with login classes change umask(1)
and we had no ways to specify non-default umask for a service
not touching its startup script. This change makes in possible.
Some file-sharing services that create new files may benefit from it.
Differential: https://reviews.freebsd.org/D36309
MFC-after: 3 days
Run a service-based setup script before running the start command.
Useful for automatic configuration file generation.
Reviewed by: https://reviews.freebsd.org/D36006
Commit 24d0c9c1f5 introduced the following regression:
% ldd /bin/ls
/bin/ls:
libutil.so.9 => /lib/libutil.so.9 (0x1021000)
libncursesw.so.9 => /lib/libncursesw.so.9 (0x1021000)
libc.so.7 => /lib/libc.so.7 (0x1021000)
Note that the base address is the same for all displayed libraries.
Fix it by passing correct object to trace_print_obj().
Fixes: 24d0c9c1f5
Reviewed by: jrtc27
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D36198
The first time a FreeBSD system boots, it obtains a hostuuid and hostid
from the smbios.system.uuid kernel environment variable. If this value
is found to be invalid, a warning is printed and the boot pauses for
two seconds to give the user a chance to read it.
If the FreeBSD kernel is launched directly in a virtual machine rather
than via the FreeBSD boot loader, the smbios.system.uuid environment
variable might not be set; in this case, there's no need to alert the
user and delay the boot process since the lack of a "hardware" uuid is
entirely expected.
Distinguish between the cases of "invalid UUID" and "no UUID", warning
and delaying the boot only in the former case. In both cases we still
generate a random UUID in software.
Reviewed by: delphij
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D36185
This change adds 2 tests to make sure that the *_oomprotect variable
sets the protection against OOM killer properly within rc(8) scripts.
This is also adding the first tests for the rc(8) framework. More tests
will be added as we go.
PR: 256148
Approved by: des
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35745
55abf23dd3 inverted the value passed to origin_subst_one when rolling
up the existing code into a loop. If the first token is found ($ORIGIN),
this results in a wild free of part of strtab. Processing the second
token works fine and will act how the first should have regardless of
whether found, allocating memory for the string without freeing.
Processing subsequent tokens however will then leak, regardless of
whether found, as they will also believe they need to allocate memory
and can't free the string.
Found by: CHERI
Reviewed by: kib, markj
Fixes: 55abf23dd3 ("rtld: make token substitution table-driven")
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D35792
The rc(8) framework support protecting services from OOM killer.
The current implementation applies the protection after the service has
already started. This works fine if only the main process is to be
protected (*_oomprotect=yes). However, the current implementation fails
to protect existing children when children are also to be protected
(*_oomprotect=all). This patch fixes that.
Note: it is not easy to apply the protectoin earlier because we want to
support both the services which use the "command" variable and those
that use the "start_cmd" variable.
PR: 256148
Approved by: adrian, osogbo
Tested by: Jamie Landeg-Jones <jamie@catflap.org>
Fixes: 3bead71e95 - Add a global option where we can protect
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D35747
atf format does not provide any way of signalling any error message
back to the atf runner when listing tests. Work this around by
reporting "__test_cases_list_pytest_binary_not_found__" test instead.
Reviewed By: kp
Differential Revision: https://reviews.freebsd.org/D35721
The mountd script in rc.d sets vfs.nfsd.server_max_nfsvers correctly
when it is run at system startup, relying on the kernel default.
However, if NFSv4 was enabled in /etc/rc.conf later, and the script
was re-run to restart mountd, the sysctl was still set to 3.
Set the sysctl to the right value in all cases.
Reviewed by: rmacklem
MFC after: 1 week
This change is a continuation of 9c42645a1e workaround.
Apparently pytest argument parser is not happy when parsing values
with spaces or just more than one --atf-var argument.
Switch wrapper to send these kv pairs as env variables. Specifically,
use _ATF_VAR_key=value format to distinguish from the other vars.
Add the `atf_vars` fixture returning all passed kv pairs as a dict.
Reviewed by: lwhsu
Differential Revision: https://reviews.freebsd.org/D35625
MFC after: 2 weeks
Move pytest wrapper to the collection of the other atf wrappers
in libexec. It solves the problem of combining bits & pieces from
bsd.test.mk and bgs.prog.mk to address "test binary, but not the
suite binary".
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D35604
MFC after: 2 weeks
ntpd does not always gracefully handle clock steps during resume.
This is probably most useful in conjunction with
ntpd_sync_on_start=YES which will work around any clock skew while
suspended.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D35479
bapt@ had discovered a noticeable boot improvement without the sleep.
Without the sleep does not affect warm or cold boot however a
service netif restart may cause dhclient to spend a few extra seconds
to rerequest the DHCP request.
Reported by: bapt
Reviewed by: bapt
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D35457
In 2018, the commit r328100 (0fdf7fa846)
removed libxo(3) support from ls(1), so ftpd has no reasons to link
with libxo since then.
ls(1) does not depend on libxo in both of stable/12 and stable/13.
MFC after: 2 weeks
If one boots up multiple copies of a template VM image containing a
zpool, the pool GUIDs will be identical, making it impossible to, e.g.,
share datasets between them.
This diff introduces a simple workaround for the problem: one can use
the script to, upon first boot, assign a new GUID to one or more zpools.
This will be useful when building ZFS-based VM images from release(7).
Reviewed by: mav, allanjude, asomers
Reviewed by: Pau Amma (docs)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35336
When no interface is specified results in a syntax error in the rc
script. Only execute poststart when an interface has been specified.
PR: 263358
Submitted by: markj
Reported by: Joshua Kinard <freebsd@kumba.dev>
Fixes: 0da2c91e64
MFC after: 3 days
To allow for a dynamic page size on arm64 have the runtime linker
query the kernel for the currentl page size.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34765
Before, preloaded objects, if not listed as needed for any normally
linked objects, were silently ignored.
Preloaded objects are printed with the `[preloaded]` herald. The list
includes the objects not listed explicitly as recursive dependencies of
the main object, effectively dsos loaded by LD_PRELOAD mechanism.
vdso is listed as well, since it is not needed by anything.
Since there is no DT_NEEDED entry for LD_PRELOADed objects, they are
usually printed using LD_TRACE_LOADED_OBJECTS_FTM2 format due to the
failure of the heuristic based on the presence of the 'lib' prefix.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34716
The zfskeys service script starts before the zfs service script, so that
dataset decryption keys are available when `zfs mount -a` is run. One of
the potential edge cases of this design is that if a key is stored on
ZFS it won't be loaded until `zfs mount -a` is issued.
In order to address that let's try to load the additional keys and mount
related ZFS datasets after the zfs script finishes its standard mounting
procedure.
PR: 262468
Reported by: Graham Perrin <grahamperrin@gmail.com>
Reviewed by: allanjude
Approved by: allanjude (src)
Fixes: 33ff39796f Add zfskeys rc.d script for auto-loading encryption keys
MFC after: 3 days
Sponsored by: Modirum
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D34601
By rc.conf(5), setting rc_startmsgs="NO" should silence start messages.
Fix a few rc scripts by using startmsg.
PR: 255207
Reported by: Jose Luis Duran <jlduran@gmail.com>
Reviewed by: imp, 0mp
Approved by: imp (src)
Differential Revision: https://reviews.freebsd.org/D34514
startmsg is a new rc.subr(8) function function to be used instead of
echo(1) when for boot messages. It replaces the often forgotten
check_startmsgs && echo ...
with
startmsg ...
No functional change intended.
I adjusted the commit message and did some final clean-ups of the patch
before committing.
PR: 255207
Reported by: Jose Luis Duran <jlduran@gmail.com>
Reviewed by: imp, 0mp
Approved by: imp (src)
Differential Revision: https://reviews.freebsd.org/D34514
/etc/rc.d/dumpon runs before /etc/rc.d/swap. When encrypted swap is in
use the .eli or .bde device will not exist at the time dumpon runs.
Even if this is addressed it does not make sense to dump core to
encrypted swap, as the encryption key will not be available after
reboot rendering the dump useless. Thus, for the case that dumpdev=AUTO
and encrypted swap is in use, strip the extension and use the underlying
device.
Emit a warning if we are using the underlying device and the user has not
configured dump encryption, so that the user knows that the will not be
encrypted.
PR: 238301
Reported by: Ivan Rozhuk
Reviewed by: jilles
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34474
- Use the standard *_flags variable for additional flags.
- Style: do not create unnecessary variables
- Do not set the defaults in the service script. This is what
/etc/defaults/rc.conf is for.
- Do not set additional flags via commands_args. ggated_flags are
already included in the final invocation. See rc.subr(8) for details.
- Document the meaning of ggated_config in /etc/defaults/rc.conf.
Approved by: eugen (src)
Fixes: c068632981 Add ggated rc script
Differential Revision: https://reviews.freebsd.org/D34439
When enabled, have the framework use the boottrace(8) utility to execute
each rc script, generating trace entries for the entire suite of
scripts.
Reviewed by: 0mp (slightly earlier version)
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31930
Arno Tuber reported via email that he needed to restart the gssd daemon
after booting, to get his Kerberized NFS mount to work.
Without this patch, rcorder shows that the gssd starts before NETWORKING
and kdc. The gssd will need NETWORKING to connect to the KDC and, if
the kdc is running on the same system, it does not make sense to start it
before the kdc. This fixed the problem for Arno.
While here, I also added a "# BEFORE: mountcritremote".
It does not affect ordering at this time, but I felt
it should be added, since the gssd needs to be running
when remote NFS mounts are done.
PR: 261939
Reported by: anothatuber@gmail.com
Tested by: anothatuber@gmail.com
Reviewed by: rew
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34265
it seems that glibc supports them, and such spelling is mentioned in the
ld.bfd manual. Idea seems to auto-correct some quoting/makefile sytnax
errors on linker command line.
Reviewed by: emaste, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34247
NanoBSD or, more generally, systems with root_rw_mount="NO" are not able
to remove the firstboot_sentinel file, typically /firstboot, because the
logic in /etc/rc is currently inverted.
When checkyesno root_rw_mount tests on a read-only file system, the
return is 1, hence avoiding the option to mount the system read-write.
Restore the ability to remove the firstboot_sentinel file on read-only
mounted file systems.
This change was introduced in 40adda8665, and partially fixed in
1ce07411fa.
Differential Revision: https://reviews.freebsd.org/D34166
PR#254282 reports a problem where nullfs mounts cannot be
exported via mountd for FreeBSD 13.0.
The problem seems to be that, to do the nullfs mounts in
/etc/fstab, they require the "late" mount option, so that the
underlying filesystem is mounted (ZFS for the PR).
Adding "mountlate" to the REQUIRE list in /etc/rc.d/mountd
fixes the problem, but that results in a dependency cycle
because /etc/rc.d/lockd specifies:
REQUIRE: nfsd
BEFORE: DAEMON
--> which forces mountd to preceed DAEMON.
This patch removes "nfsd" from REQUIRE for lockd and statd,
then adds mountlate to REQUIRE for mountd, to fix this
problem. Having lockd REQUIRE nfsd was done in the NetBSD
code when it was pulled into FreeBSD and there does not
seem to be a need for this.
In case this causes problems, a long MFC has been specified.
PR: 254282
Differential Revision: https://reviews.freebsd.org/D33256
MFC after: 3 months
This addresses the following boot message:
/etc/rc: WARNING: $zfskeys_enable is not set properly - see rc.conf(5).
Reported by: Mark Millard
Sponsored by: Modirum MDPay
Sponsored by: Klara Inc.
Fixes: bfb7a31b6a ("rc: Hook zfskeys to the build")
Fixes: 33ff39796f ("Add zfskeys rc.d script for auto-loading encryption keys")
When a use sets umask in login.conf(5) to 027 or 077 a subsequently
fetched /var/db/ntpd.leap-seconds.list will inherit the permissions
allowed by the umask, resulting in a file that may not be readable
ntpd running under the ntp account. This patch adds a umask command
to preempt the umask in login.conf(5) prior to fetching a new copy
of the leap-seconds file.
PR: 261298
Reported by: Martin Waschbusch <martin@waschbuesch.de>
MFC after: 3 days
And put the tcp-wrapper utilities in it.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33439
Move some needed binaries/libs from FreeBSD-utilities to FreeBSD_runtime.
This is everything needed to boot to multiuser with FreeBSD-rc installed.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33435
YP is less and less used, split them to users have the choice to not
install them.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33441
Like wpa_supplicant, hostapd does not automatically UP the interface
when configured. The fix is similar to 5fcdc19a81.
Reported by: avg
Tested by: avg
MFC after: 1 week
In network6_getladdr() we are iterating over inet6 lines and are not
interested in any others. So tell ifconfig to limit output to "inet6"
as much as possible.
This is probably a micro-optimisation but was noticed while looking
at other IPv6-related boot-time improvements.
MFC after: 1 week
- Include <machine/tls.h> in MD rtld_machdep.h headers.
- Remove local definitions of TLS_* constants from rtld_machdep.h
headers and libc using the values from <machine/tls.h> instead.
- Use _tcb_set() instead of inlined versions in MD
allocate_initial_tls() routines in rtld. The one exception is amd64
whose _tcb_set() invokes the amd64_set_fsbase ifunc. rtld cannot
use ifuncs, so amd64 inlines the logic to optionally write to fsbase
directly.
- Use _tcb_set() instead of _set_tp() in libc.
- Use '&_tcb_get()->tcb_dtv' instead of _get_tp() in both rtld and libc.
This permits removing _get_tp.c from rtld.
- Use TLS_TCB_SIZE and TLS_TCB_ALIGN with allocate_tls() in MD
allocate_initial_tls() routines in rtld.
Reviewed by: kib, jrtc27 (earlier version)
Differential Revision: https://reviews.freebsd.org/D33353
This matches the TLS_TCB_ALIGN definition in libc.
Reviewed by: kib, jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33349
Previously TLS_DTV_OFFSET was added to the offset passed to
tls_get_addr_common; however, this approach matches powerpc and RISC-V
and better matches the intention.
Reviewed by: kib, jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33347
This is the more standard name for the bias of dtv pointers used on
other platforms. This also fixes a few other places that were using
the wrong bias previously on MIPS such as dlpi_tls_data in struct
dl_phdr_info and the recently added __libc_tls_get_addr().
Reviewed by: kib, jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33346
This reverts commit 266f97b5e9, reversing
changes made to a10253cffe.
A mismerge of a merge to catch up to main resulted in files being
committed which should not have been.
This disables the random (between zero and one seconds) delay before
rtsol and rtsold send a a Router Solicitation packet. This delay is
specified as a SHOULD by RFC 4861 for avoidance of network congestion,
but network speeds have increased enough in the 25 years since this
first appeared (in RFC 1970) that it seems unnecessary as a default
at this point.
This speeds up the FreeBSD boot process by an average of 500 ms.
Reviewed by: kp
MFC after: 1 week
Relnotes: yes
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D33089
Variables must be quoted if they contain non-alphanumeric characters.
Warner noted in the review that the lack of quoting causing problems
here is rather an edge case. I believe that it's worth adding the quotes
here anyway because this is what the specification says and there is no
good reason not to follow it.
Reviewed by: imp
Approved by: imp (src)
MFC after: 7 days
Add in all the variables set in the kenv variable devmatch_blocklist
too. This allows blocking autoloading from the boot loader.
Sponsored by: Netflix
Reviewed by: 0mp
Differential Revision: https://reviews.freebsd.org/D32171
Since vfs.nfsd.srvmaxio can only be set when nfsd.ko
is loaded, but nfsd is not running, setting it in
/etc/sysctl.conf is not feasible when "options NFSD"
was not specified for the kernel.
This patch adds a new rc variable nfs_server_maxio,
which sets vfs.nfsd.srvmaxio at the correct time.
rc.conf.5 will be patched separately.
Reviewed by: 0mp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32997
Currently, if the linux service is run twice, mount(8) fails with:
mount: linprocfs: Device busy
mount: linsysfs: Device busy
mount: devfs: Device busy
mount: fdescfs: Device busy
mount: tmpfs: Device busy
It is a bit more user-friendly if before running mount(8) the service
checks if there are any file systems left to be mounted. This patch
implements this behavior.
Also, while here, create mount points directories (as suggested by
otis).
Reviewed by: trasz
Approved by: trasz (src)
Differential Revision: https://reviews.freebsd.org/D32463
Consistently use `return ()'.
Fix some spacing issues with types formatting, and around binary ops.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
File descriptor we operate on might reference something that is not a
file, e.g. shmfd. In this case, we cannot check MNT_NOEXEC in
principle.
If fstatfs(2) caused some failure on normal filesystem, then typical
expectation is that read or mmap of this file would also fail. If not,
mmap(2) PROT_EXEC on MNT_NOEXEC filesystem returns EACCES.
Reported by: obiwac@gmail.com
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Default value for ld_dynamic_weak is true, non-default settings should
be activated for the false value.
Reported by: obiwac@gmail.com
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
but still for tightly coupled things like ldd(1)
Rename paths.h to rtld_paths.h.
Add guard for rtld-specific externs declarations.
Add _COMPAT32_BASENAME_RTLD and _COMPAT32_PATH_RTLD.
Reviewed by: arichardson, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32464
Reset both pagepool_start and pagepool_end after a mmap(2) failure,
to avoid using invalid pagepool either for allocation or munmap(2).
PR: 259076
Noted by: Denis Koreshkov <dynamic-wind@mail.ru>
Reviewed by: arichardson
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32514
PIE and shared objects usually have many relative relocations. In
2017/2018, a compact relative relocation format RELR was proposed on
https://groups.google.com/g/generic-abi/c/bX460iggiKg/m/GxjM0L-PBAAJ
("Proposal for a new section type SHT_RELR") and is a pre-standard.
RELR usually takes 3% or smaller space than R_*_RELATIVE relocations.
The virtual memory size of a mostly statically linked PIE is typically
5~10% smaller.
ld.lld --pack-dyn-relocs=relr emits RELR relocations. DT_RELR has been
adopted by Android bionic, Linux kernel's arm64 port, Chrome OS (patched
glibc).
This patch adds DT_RELR support to FreeBSD rtld-elf.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32524
This has the effect of installing the same file twice at the same location
and confuse pkgbase as we add this file twice in the package config part.
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
to ignore lack of execute permission on the binary. The check is a
bad security theatre anyway.
Reviewed by: arichardson, imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32464
In the situation with limited address space, together with
fragmentation, it is possible for mmap() request in morecore() to fail
when asking for required size + NPOOLPAGES, but succeed without the
addend. Retry allocation there.
PR: 259076
Reported by: Denis Koreshkov <dynamic-wind@mail.ru>
Reviewed by: arichardson
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32474
We'd likely be better served by converting these to the equivalent mem*
calls, but just kill the knob for now. The b* macros being defined get
in the way of _FORTIFY_SOURCE.
Reviewed by: imp, markj
Differential Revision: https://reviews.freebsd.org/D32235
The 3com bluetooth PC Card adapter was removed from the tree when PC
Card support was removed earlier this year. Remove stray references to
it still in the tree.
Sponsored by: Netflix
compatibility layer. When /compat is located on a ZFS other than /,
mount would fail because they were not mounted.
Solve this by moving `linux` to depend on `zfs` which mounts all ZFS
filesystems.
Differential Revision: https://reviews.freebsd.org/D31848
MFC after: 2 weeks
Using /etc/jail.{jailname}.conf is nice, however it makes /etc/ very
messy if you have many jails. This patch allows one to move these
config files out of the way into /etc/jail.conf.d/{jailname}.conf.
Note that the same caveat as /etc/jail.*.conf applies: the jail service
will not autodiscover all of these for starting 'all' jails. This is
considered future work, since the behavior matches.
Reviewed by: kevans
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D24570
5fcdc19a81 didn't fully resolve the issue. There remains a report
that an ifconfig wlan0 up by itself is insufficient. Ifconfig down
must precede it.
Reported by: Filipe da Silva Santos <contact _ shiori_com_br>
Fixes: 5fcdc19a81
MFC after: 3 days
Some installations may experience CTRL-EVENT-SCAN-FAILED when
associating to an AP. Installations that specify
ifconfig_wlan0="WPA ... up" in rc.conf do not experience
the problem whereas those which specify ifconfig_wlan0="WPA" without
the "up" will experience CTRL-EVENT-SCAN_FAILED.
However those that specify "up" in ifconfig_wlan0 will be able to
reproduce this problem by service netif stop wlan0;
service netif start wlan0. Interestingly The service netif stop/start
problem is reproducible on the older wpa 2.9 as well.
Reported by: dhw
Reported by: "Oleg V. Nauman" <oleg _ theweb_org_ua>
Reported by: Filipe da Silva Santos <contact _ shiori_com_br>
Reported by: Jakob Alvermark <jakob _ alvermark_net>
MFC after: 3 days
both telnet and telnetd aren't that useful nowadays but some
might want them.
Create a FreeBSD-telnet package so users have a choice to have
them or not.
Differential Revision: https://reviews.freebsd.org/D31791
Reviewed by: emaste
define procname or have a PID file. This might be useful for cases,
such as mounting local FS, when there is no running daemon
still some other persistent state in the system which status
can be checked.
It is still possible to have a status method before this by having
extra_commands="status", but it's not obvious and might give
an script writer some extra legwork to figure out how and why
the straight method is not working.
Reviewed by: cy
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D31614
- Fix a warning in growfs. gpart commit is supposed to be called on disk
device.
- Silence a gpart commit warning in growfs.
Submitted by: loos
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D31587
Sponsored by: Rubicon Communications, LLC ("Netgate")
Scan through the set of environment variables during initialization and
store values in the corresponding ld_env_var_desc structure, in the
single pass at init time. This does not eliminate use of getenv(3) and
unsetenv(3) completely, but provides a foundation to do that as the next
step.
Also organize the scan in a way that makes it easier to support aliases
like LD_DEBUG vs. LD_64_DEBUG.
Suggested by: arichardson
Reviewed by: arichardson, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31545
Instead of specifying the main name part of the environment variable as the
string literal, create array of the var names and access them by symbolic
index. Convert main name parts into complete names by prefixing with
ABI-specific ld_env_vars.
This way the name is not repeated, and also it can carry additional
proporties explicitly. For instance, cleanup of the environment for
the setuid image does not require retyping all names.
Reviewed by: arichardson, markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D31545
Jails with jails is a supported. This change allows the script to run
upon startup with a jail. Without this, jails are not automatically
started within jails.
The current lookup prefers a strong definition to a STB_WEAK definition
(similar to glibc pre-2.2 behavior) which does not conform to the ELF
specification.
The non-compliant behavior provoked https://reviews.llvm.org/D4418
which was intended to fix -shared-libasan but introduced
new problems (and caused some sanitizer tests (e.g.
test/asan/TestCases/interception_failure_test.cpp) to fail): sanitizer
interceptors are STB_GLOBAL instead of STB_WEAK, so defining a second
STB_GLOBAL interceptor can lead to a multiple definition linker error.
For example, in a -fsanitize={address,memory,...} build, libc functions
like malloc/free/strtol/... cannot be provided by user object files.
See
https://docs.freebsd.org/cgi/getmsg.cgi?fetch=16483939+0+archive/2014/freebsd-current/20140716.freebsd-current
for discussions.
This patch implements the ELF-compliant behavior when LD_DYNAMIC_WEAK is
set. STB_WEAK wrestling in symbol lookups in `Search the dynamic linker
itself` are untouched.
Reviewed by: kib
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26352
Variant I architectures use off and Variant II ones use size + off.
Define TLS_VARIANT_I/TLS_VARIANT_II symbols similarly to how libc
handles it.
Reviewed by: kib
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31539
Differential revision: https://reviews.freebsd.org/D31541
For a Variant II architecture, the TP offset of a TLS symbol is st_value -
tlsoffset + r_addend. tlsoffset is computed by either calculate_tls_offset
or calculate_first_tls_offset.
The return value of calculate_first_tls_offset is the smallest integer
satisfying res >= size and (-res) % p_align = p_vaddr % p_align
(= p_offset % p_align). (The formula is a bit contrived. The basic idea
is to subtract the minimum integer from size + align - 1 so that the result
ihas the expected remainder.)
Reviewed by: kib
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31538
Differential revision: https://reviews.freebsd.org/D31541
lld rounds up p_memsz(PT_GNU_RELRO) to satisfy common-page-size. If the
page size is smaller than common-page-size, rounding up relro_size may
incorrectly make some RW pages read-only.
GNU ld, gold, and ld.lld ensures p_vaddr+p_memsz is a multiple of
common-page-size. While max-page-size >= system the page size,
common-page-size can be smaller than the system page size.
Submitted by: MaskRay
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31498
This adds two new options WITH_ASAN/WITH_UBSAN that can be set to
enable instrumentation of all binaries with AddressSanitizer and/or
UndefinedBehaviourSanitizer. This current patch is almost sufficient
to get a complete buildworld with sanitizer instrumentation but in
order to actually build and boot a system it depends on a few more
follow-up commits.
Reviewed By: brooks, kib, markj
Differential Revision: https://reviews.freebsd.org/D31043
ZFS in 13 supports encryption, but for the use case where keys are
available in plaintext on disk there is no mechanism for automatically
loading keys on startup.
This script will, by default, look for any dataset with encryption and
keylocation prefixed with file://. It will attempt to unlock, timing
out after 10 seconds for each dataset found.
User can optionally specify explicitly which datasets to attempt to
unlock.
Also supports (optionally by force) unmounting filesystems and unloading
associated keys.
Sponsored by: Modirum
Differential Revision: https://reviews.freebsd.org/D30015
Delete code killed by SVN r13139 in 1996. Little chance that it would
still compile today.
PR: 257317
Reported by: Alan Shearer <sakison@gmail.com>
MFC after: 2 weeks
Sponsored by: Axcient
lld emits several GOT relocations referencing the null sumbol in libc.so
when compiled with -ftls-model=initial-exec. This symbol is specified
to be undefined.
We generally do not handle dynamic TLS relocations against weak,
undefined symbols, so avoid printing a warning here. This makes it
possible to compile libc.so using the initial-exec TLS model on arm64.
Reviewed by: jrtc27, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31069
devmatch rc script would announce it was loading a module multiple
times. It used kldload -n so it really wasn't loading it that many
times, but the message is confusing. Use kldstat to see if we need to
load the module before saying we do. This fixes the vast majority of the
problems. It may be possible to race devmatch with a user invocation and
devd, though quite hard. In that case we'll announce things twice, but
still only load it once. No attempt is made to fix this.
PR: 232782
MFC After: 2 weeks
Sponsored by: Netflix
We document that we did not need .ko on the module names in
devmatch_blocklist, but we really needed them. Keep the documentation
the same, but strip the .ko when we need to use the names so you can
specify either.
PR: 256240
MFC After: 2 weeks
Sponsored by: Netflix
Support loading a default pf ruleset in case of invalid pf.conf.
If no pf rules are loaded pf will pass/allow all traffic, assuming the
kernel is compiled without PF_DEFAULT_TO_DROP, as is the case in
GENERIC.
In other words: if there's a typo in the main pf_rules we would allow
all traffic. The new default rules minimise the impact of this.
If $pf_program (i.e. pfctl) fails to set $pf_fules and
$pf_fallback_rules_enable is YES we will load $pf_fallback_rules_file if
set, or $pf_fallback_rules.
$pf_fallback_rules can include multiple rules, for example to permit
traffic on a management interface.
$pf_fallback_rules_enable defaults to "NO", preserving historic behaviour.
man page changes by ceri@.
PR: 256410
Reviewed by: donner, kp
Sponsored by: semaphor.dk
Differential Revision: https://reviews.freebsd.org/D30791
devmatch loads a number of things automatically. Allow the list of
things to load to happen first in case those drivers affect what would
be loaded. Normally, this will produce the same results, but there's
some special cases that may not when drivers are loaded that report
other drivers missing, like virtio_pci.
PR: 253287
Reviewed by: imp
MFC After: 2 weeks
This prevents these tests from being compiled with ASAN since the asan
interceptors also define opendir() but matching the libc function.
Reviewed By: oshogbo, kib, markj
Differential Revision: https://reviews.freebsd.org/D31038
This is a more reliable method that accounts for existing pidfiles,
procname and interpreter settings.
Current method of obtaining the pid for oomprotect="YES"|"ALL" processes
in certain cases fails to find a unique pid.
One such case are rc.d scripts defining command as:
command="daemon"
which results in all processes started via daemon being selected and
passed to protect(1) which fails and prints usage:
$ /etc/rc.d/exampled restart
Stopping exampled.
Starting exampled.
usage: protect [-i] command
protect [-cdi] -g pgrp | -p pid
Running the same with -x reveals what happens:
+ pid='3051 4268 4390 4421 4427 4470 4588 4733 4740 4870 4949 4954 4979
5835 5866 55487 55583 56525 57643 57789 57882 58072 58167 99419'
+ /usr/bin/protect -p 3051 4268 4390 4421 4427 4470 4588 4733 4740 4870
4949 4954 4979 5835 5866 55487 55583 56525 57643 57789 57882 58072 58167
99419
usage: protect [-i] command
protect [-cdi] -g pgrp | -p pid
We have a more reliable way of obtaining pid already defined in rc.subr
and available when protect(1) needs it. We can simply `eval $_pidcmd`
which also invokes `check_process` but properly accounts for existing
pidfile, procname and interpreter settings.
With the change the pidfile is properly obtained.
Submitted by: Adam Wolk <a.wolk at fudosecurity.com>
Sponsored by: Fudo Security
Differential Revision: https://reviews.freebsd.org/D30367
The mprotect() call was failing on CheriBSD when changing rtld's relro
page permissions due to missing CHERI capability permissions on the
mprotect() argument but did not report an error since the return value
was being ignored. It should never fail on any supported FreeBSD
architecture, but checking the return value seems like a good
sanity check to me.
Reviewed By: kib, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30820
And move all the nfs related commands there.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D30754
Sponsored by: Diablotin Systems
Accept the old rc.conf variable if the new one is not present for
compatability.
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D30806
This manpage has incorrectly documented the "dialup"
keyword as "dialin" since it was first added. Correct that.
Approved by: blackend (mentor)
MFC after: 12 days
Replace the check for zero harvest_mask with new check for empty string.
This allows one to specify harvest_mask="0" that disables harversting
entropy from all but "pure" sources. Exact bit values for "pure" sources
differ for stable/12 and later branches, so it is handy to use zero.
The check for zero pre-dates introduction of "pure" non-maskable sources
Use empty string to disable altering sysctl kern.random.harvest.mask.
Note that notion of "pure" random sources is not documented in user level
manual pages yet. Still, it helps to extend battery life for hardware
with embedded "Intel Secure Key RNG" by disabling all other sources.
Note that no defaults changed and default behaviour is not affected.
Reported by: Dmitry Luhtionov
/etc/rc.d/securelevel is supposed to run /etc/rc.d/sysctl lastload
late at boot time to apply /etc/sysctl.conf settings that fail
to apply early. However, this does not work in default configuration
because of kern_securelevel_enable="NO" by default.
Add new script /etc/rc.d/sysctl lastload that starts unconditionally.
Reported by: Marek Zarychta
MFC after: 1 month
Currently ipfw has multiple components that are not parts
of GENERIC kernel like dummynet etc. They can bring in important
sysctls if enabled with rc.conf(5) and loaded with ipfw startup script
by means of "required_modules" after initial consult
with /etc/sysctl.conf at boot time. Here is an example of one
increasing limit for dummynet hold queues that defaults to 100:
net.inet.ip.dummynet.pipe_slot_limit=1000
This makes it possible to use ipfw/dummynet rules such as:
ipfw pipe 1 config bw 50Mbit/s queue 1000
Such rule is rejected unless above sysctl is applied.
Another example is a group of net.inet.ip.alias.* sysctls
created after libalias.ko loaded as dependency of ipfw_nat.
This is not a problem if corresponding code compiled in custom kernel
so sysctls exist when sysctl.conf is read early or kernel modules
loaded with a loader. This change makes it work also for GENERIC
and modules loaded by means of rc.conf(5) settings.
MFC after: 1 month
There are still references to timed(8) and timedc(8) in the base system,
which were removed in 2018.
PR: 255425
Reported by: Ceri Davies <ceri at submonkey dot net>
Reviewed by: ygy, gbe
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30232
There should be no error after startup.
PR: 255698
Reported by: Eugene M. Kim <astralblue@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Make rc.d/routing read defaultrouter_fibN and ipv6_defaultrouter_fibN, and
set it as the default gateway for FIB N, where N is from 1 to (net.fibs - 1)
This allows adding gateways for multiple FIBs in the same format as the main
gateway. (FIB 0)
Reviewed by: olivier, rgrimes, bcr (man page)
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D22706
rtld preserves its current error message around calls to user init/fini
lists, to not override original error with potential secondary errors
caused by user code recursing into rtld. After 4d9128da54,
the preservation of the string itself is not enough, the 'seen'
indicator must be preserved as well. Otherwise, since new code does not
clear string (it cannot), call to _rtld_error() from errmsg_restore()
revived whatever message was consumed last.
Change errmsg_save() to return structure recording both 'seen' indicator
and the message, if any.
PR: 255698
Reported by: Eugene M. Kim <astralblue@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
set kld_disbale=y or any value in the boot loader and that will
disable loading of the kld_list.
Differential Revision: https://reviews.freebsd.org/D26939
Once the ipfw0 interface has been created, ifconfig(8) create will
throw a warning: ifconfig: create: bad value' when trying to create it
again.
PR: 241013
Submitted by: Jose Luis Duran
Approved by: kp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30083
Previously it depended on sysctl, which itself has no dependencies,
so rcorder(8) had a bit too much flexibility when choosing when to run
it. Make sure it runs just between 'fsck' and 'root'.
Reviewed By: jmg, imp
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D29748
This removes a minor annoyance with Linux jails, where you often
want linux_mounts_enable="NO", yet you want those filesystems
available for mounting in jails; normally mount(8) would result
in kernel automatically loading the KLD, but this doesn't work
inside jails or chroots.
PR: 242955
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D29725
This improves consistency; the NETWORKING script provides both,
so there should be no functional change.
Differential Revision: https://reviews.freebsd.org/D29587
It was unused since 405c3050f1, which removed iBCS support.
This also moves the 'linux' rc script slightly earlier, which
might help in some setups. The original version of this patch
moved it even more, before 'mountcritlocal', which would fixe
mount(8) errors due to missing /dev/shm in setups with entries
for /path/to/chroot/dev/shm without the "late" flag; however,
in the end 'kldxref' turned out to depend on 'mountcritlocal'
anyway.
Reported By: pstef
Reviewed By: dchagin
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D29590
Right now, libthr does not initialize RtldLockInfo.rtli_version when calling
_rtld_thread_init(), which makes versioning the interface troublesome.
Add a workaround: if the calling object of _rtld_thread_init() exports
the "_pli_rtli_version" symbol, then consider rtli_version initialized.
Otherwise, forcibly set it to RTLI_VERSION_ONE, currently defined as
RTLI_VERSION.
Export "_pli_rtli_version" from libthr and properly initialize rtli_version.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29633
This makes it run a bit earlier in the startup, which will
be useful for the linux rc script later on.
Reviewed By: imp (earlier version)
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D29589
This eliminates some non-trivial amount of code duplication, where done.
Only x86 and mips are handled right now.
Tested by: bdragon (powerpc), mhorne (riscv)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29623
This fixes a regression in d36d681615, where the call to
__tls_get_address() was performed under rtld_bind_lock write-locked.
Instead use tls_get_addr_slow() directly, with locked = true.
Reported by: jkim, many others
Tested by: jkim, bdragon (powerpc), mhorne (riscv)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29623
This was only needed on 32-bit arm prior to ARMv6. As we only support
ARMv6 or later remove it.
Reviewed by: mannu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D29624
dl_iterate_phdr() dlpi_tls_data should provide the TLS module segment
address, and not the TLS init segment address as it does now.
Reported by: emacsray@gmail.com
PR: 254774
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
If the root file system is composed from multiple devices, wait for
devices to be ready before running zpool and dumpon rc scripts.
An example of this is if the bulk of the root file system exists on a
fast device (e.g. NVMe) but the /var directory comes from a ZFS dataset
on a slower device (e.g. SATA). In this case, it is possible that the
zpool import may run before the slower device has finished being probed,
leaving the system in an intermediate state.
Fix is to add root_hold_wait to the zpool and dumpon (which has a
similar issue) rc scripts.
PR: 242189
Reported by: osidorkin@gmail.com
Reviewed by: allanjude
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D29101
