The new liblua will be used in a forthcoming import of kyua.
Reviewed by: kevans
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24090
aout support in ldconfig hasn't been required since FreeBSD 2.x.
Anyone still using FreeBSD 2 shared libraries can also use a FreeBSD 2
ldconfig to generate aout ldconfig hints.
Sponsored by: The FreeBSD Foundation
We have ad-hoc stale dependency handling in Makefile.inc1 to handle the
cases where file extensions change, but it appears that some cases are
not functional. Add a note when about to clean stale deps to help
when investigating failure reports.
Sponsored by: The FreeBSD Foundation
This is required to switch MIPS to compile with LLVM by default (D23204).
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D24091
Clang does not recognize some of the GCC optimization options that are
used to compile ucore_app.bin. This is required to switch MIPS to
compile with LLVM by default (D23204).
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D24092
It turns out that units(1) is not as horrible to use in scripts
as I initially thought. When the --terse flag is combined
with an appropriate output format (set via --output-format),
units(1) is actually capable of producing very nice results.
For example:
units -o %0.f -t '4 gigabytes' bytes
is is just going to print out the expected value of 4294967296.
There is no time to waste. People have to know about it.
I am adding an example for this at the top of the examples section
because this is what users are most likely looking for.
Approved by: bcr (mentor)
Differential Revision: https://reviews.freebsd.org/D24096
When vmx(4) was converted to an iflib driver in r343291, the
power-of-2 queue count constraint was removed as it appeared that
current implementations of the VMXNET3 virtual device no longer
required that constraint. It turns out that some of the
implementations still do, and on such systems, the device will fail to
initialize when configured with a non-power-of-2 RX or TX queue count.
PR: 237321
Reported by: ncrogers@gmail.com
MFC after: 1 week
The intent seems to be zeroing all of the cc_cpu array, or its singleton on
such platforms. The assumption made is that the BSP is always zero. The
code smell was introduced in r326218, which changed the prior explicit zero
to 'curcpu'. The change is only valid if curcpu continues to be zero,
contrary to the aim expressed in that commit message.
So, more succinctly, the expression could be: memset(cc_cpu,0,sizeof(cc_cpu)).
However, there's no point. cc_cpu lives in the data section and has a zero
initial value already. So this revision just removes the problematic
statement.
No functional change. Appeases a (false positive, ish) Coverity CID.
CID: 1383567
Reported by: Puneeth Jothaiah <puneethkumar.jothaia AT dell.com>
Reviewed by: kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24089
Attempt to run scrub or resilver on a new pool containing only special
allocations (special vdev added on creation) caused infinite loop
because of dsl_scan_should_clear() limiting memory usage to 5% of pool
size, which it calculated accounting only normal allocation class.
Addition of special and just in case dedup classes fixes the issue.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#10106Closes#8694openzfs/zfs@fa130e010c
For a Netflix 90Gb/s 100% TLS software kTLS workload, this reduces
the CPI of tcp_m_copym() from ~3.5 to ~2.5 as reported by vtune.
Reviewed by: jtl, rrs
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D23998
Skip device mode switch step on Fountain-based devices as they don't
support RAW_SENSOR_MODE command, so failing to attach.
This was reproduced on PowerBook G4 (model PowerBook5,6) equipped with
product ID 0x020e
Reviewed by: hselasky
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D24005
These have an educational value and are, no doubt, an integral part of the fun
behind running the BSDs.
PR: 242909, 242918
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23581
ifsd_cidx is never used, and the line removed from rxd_frag_to_sd() is
just dead code.
Reviewed by: erj, gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23951
These adjustments improve performance with jumbo frames and/or LRO
enabled (i.e., when there may be multiple descriptors per packet) by
increasing the default size of the receive queues and by always using
page-sized buffers for the body type receive ring.
This patch also adjust the initialization of the max frame size to
remove cases where certain configuration sequences would result in 2K
receive buffers being used instead of 4K ones when jumbo frames were
enabled.
Reviewed by: gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23950
This fixes a bug where the checksum offload status of received packets
was being taken from the first descriptor instead of the last, which
affected LRO packets.
The driver has been hardened against the device skipping receive
descriptors, although it is not believed that this can occur given the
way this implementation configures the receive rings.
Additionally, for packets received with the error indicator set, the
driver now forces the length of all fragments in that packet to zero
prior to passing it to iflib. Such packets should wind up being
discarded at some point in the stack anyway, but this removes any
questions by killing them in the driver.
Counters have been added (and exposed via sysctls) for skipped receive
descriptors, zero-length packets received, and packets received with
the error indicator set so that these conditions can be easily
observed in the field.
PR: 243126, 243392, 240628
Reported by: avg, alexandr.oleynikov@gmail.com, Harald Schmalzbauer
Reviewed by: gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23949
The vmx driver is an example of an iflib driver that might report
packets using non-contiguous descriptors (with unused descriptors
either between received packets or between the fragments of a received
packet), so this assertion needs to be removed.
For such drivers, the freelist producer and consumer indexes don't
relate directly to driver ring slots (the driver deals directly with
freelist buffer indexes supplied by iflib during refill, and reports
them with each fragment during packet reception), but do continue to
be used by iflib for accounting, such as determining the number of
ring slots that are refillable.
PR: 243126, 243392, 240628
Reported by: avg, alexandr.oleynikov@gmail.com, Harald Schmalzbauer
Reviewed by: gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23946
The dmamap for zero-length fragments should not be unloaded, as doing
so breaks the the cluster-reuse logic in _iflib_fl_refill().
All zero-length fragments are now handled by the assemble_segments()
path so that the cluster-reuse logic there does not have to be
replicated in the small-single-fragment-packet path of
iflib_rxd_pkt_get().
Packets consisting entirely of zero-length fragments (which result in
a NULL mbuf pointer) are now properly tolerated. This allows drivers
(such as the vmx driver) to pass such packets to iflib when a
descriptor error occurs during packet reception, the advantage being
that the refill of descriptors associated with the error packet are
handled via the existing iflib machinery without having to duplicate
parts of that machinery in the driver to handle that error case.
Reviewed by: avg, erj, gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23945
This fixes a bug in iflib freelist management that breaks the required
correspondence between freelist indexes and driver ring slots.
PR: 243126, 243392, 240628
Reported by: avg, alexandr.oleynikov@gmail.com, Harald Schmalzbauer
Reviewed by: avg, gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23943
reasons. Those have now left the tree, and with them the need to have machdep
files. Places that called the routines in quesiton have been removed
previously. Remove these files from the Makefile to tidy up.
This similarly matches what we do in libc; compiling libssp with
-fstack-protector* is actively harmful. For instance, if the canary ctor
ends up with a stack protector then it will trivially trigger a false
positive as the canary's being initialized.
This was noted by the reporter as irc/ircd-hybrid started crashing at start
after our libssp was MFC'd to stable/11, as its build will explicitly link
in libssp. On FreeBSD, this isn't necessary as SSP bits are included in
libc, but it should absolutely not trigger runtime breakage -- it does mean
that the canary will get initialized twice, but as this is happening early
on in application startup it should just be redundant work.
Reported by: Tod McQuillin <devin@sevenlayer.studio>
MFC after: 3 days
If a user spplies a non-\0 terminated osrelease parameter reading it back
may disclose kernel memory.
This is a problem in case of nested jails (children.max > 0, which is not
the default). Otherwise root outside the jail has access to kernel memory
by other means and root inside a jail cannot create a child jail.
Add the proper \0 check at the end of a supplied osrelease parameter and
make sure any copies of the field will be \0-terminated.
Submitted by: Hans Christian Woithe (chwoithe yahoo.com)
MFC after: 3 days
In order to determine the type of a compressed file, we have to read
in the first four bytes which may also be important for decompression
purposes, to do that we would pass the buffer that we have already
read in, along with the size of it.
Rename header1 to fourbytes to make that explicit, and remove all
checks for prelen.
Reported by: cem
Reviewed by: cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24034
generate for a race where a device goes away, we start to tear down
the periph state for the device, and then the device suddently
reappears. The key that makes it work is removal of periph from the
drv list before calling the deferred callback.
Hat tip to: mav@
Print the pointer to ccb so we can find it (for what good it does)
as well as the type of operation in flight when the cam_path has
been freed out from under us. This helps both core analysis as well
as automated systems that collect panic strings but little else.
Lua does not provide a native way to change the permission of a file.
Submitted by: Yang Wang <2333@outlook.jp>
Reviewed by: kevans
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24036
192 bytes are not enough to print long commands, such as ATA COMMAND PASS
THROUGH(16), that makes debug output difficult to read.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Escape sequences like "\n" have to be escaped twice in examples in our
mdoc(7)-based manual pages in order to be displayed properly. The problem
is that otherwise they are interpreted by mdoc(7), which results in:
printf("parent: received '%s'0, buf);
being shown to the user instead of:
printf("parent: received '%s'\n", buf);
Approved by: bcr (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24056
it's not in use by TOE or KTLS.
Reviewed by: jhb@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24046
Modules from ports/pkg are commonly installed to /boot/modules rather than to
the same directory the kernel resides in. Look there if a module is not found
next to the kernel.
Submitted by: mmacy
Reported by: Nick Principe <nap@iXsystems.com>
Approved by: mmacy (mentor)
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
