Before the change, we would get errors like this:
ERROR: "foo * bar" should be "foo *bar"
#369: FILE: foobar.c:369:
+barbaz(char * __restrict s,
Reviewed by: des, imp
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D44911
People still believe that it is essential to run sync(8) a couple of
times before a reboot/halt. Document that this has not been necessary
for a long time now.
Reviewed by: imp, bcr, Pau Amma <pauamma@gundo.com>
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D33233
The fact that an accept filter needs to be cleared first before setting to
a different one isn't properly documented. The requirement that the
socket needs already be listening, although trivial, isn't documented
either. At least return a more meaningful error than EINVAL for an
existing filter. Cover this with a test case.
This was missed when read/write, etc were updated to return ssize_t.
Fixes: 2e83b28161 Fix a few syscall arguments to use size_t instead of u_int.
Reviewed by: imp, kib
Differential Revision: https://reviews.freebsd.org/D44930
This is used to mark symbols that use a variant procedure call with
a different calling convention to the main ABI.
Reviewed by: kib, imp
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D44868
Also set MACHINE and MACHINE_ARCH when reading config options from
src.opts.mk. This ensures any machine-dependent options are reported
correctly.
Reviewed by: emaste, imp
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D44838
When checking if a physical address is in the DMAP region we assume
all physical addresses between DMAP_MIN_PHYSADDR and DMAP_MAX_PHYSADDR
are able to be accesses through the DMAP. It may be the case that
there is device memory in this range that shouldn't be accessed through
the DMAP mappings.
Add a check to PHYS_IN_DMAP that the translated virtual address is a
valid kernel address. To support code that already checks the address
is valid add PHYS_IN_DMAP_RANGE.
PR: 278233
Reviewed by: alc, markj
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D44677
Ensure the TLB is invalidated before enabling the EL2 MMU. Without
this the TLB may be in an inconsistant state leading to a possible
exception when enabling the MMU.
PR: 277559
Reviewed by: markj
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D44799
- Mention the options that are amd64-only.
- Provide a minimal example for booting an arm64 guest.
Reviewed by: corvink
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D44738
It is a no-op on amd64 now and is not implemented on arm64, so let's
remove mention of it altogether so as to reduce confusion for arm64
users.
Reviewed by: corvink, jhb
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D44737
While here remove an old comment regarding preallocation; it appears to
refer to an optimization that is almost certainly irrelevant at this
point.
No functional change intended.
MFC after: 1 week
This is the behavior described in the man page.
Signed-off-by: Martin Vahlensieck <git@academicsolutions.ch>
Discussed with: glebius
Reviewed by: markj
MFC after: 2 weeks
Pull Request: https://github.com/freebsd/freebsd-src/pull/1181
Add a new kdc_restart rc variable that manages kdc (or krb5kdc) under
daemon(8). This automatically restarts the kdc should it fail, i.e.
when it's configured to use LDAP as a backend and cannot connect to its
LDAP directory.
Set kdc_restart="YES" to auto restart kdc on abnormal termination.
Set kdc_restart_delay="N" to the number of seconds to delay before
restarting the kdc. The daemon(8) default seconds applies when not set.
Reported by: Lexi Winter <lexi.freebsd@le-fay.org>
PR: 278395
Differential Revision: https://reviews.freebsd.org/D44898
This is a smaller version of upstream
1fafd968b48e5cea6c85f126d77071a8de707a55 to address the
issue that less not being able to operate on files
residing in pseudo-filesystems that advertize a zero
size value.
PR: bin/276133
MFC after: 3 days
This reverts commit cf04a7775a4e8ff6fd28c768be9daa3d83dd382e.This is
broken on armv7, and closer scrutiny of the reviews shows I was in error
when I thought it was ready.
The CAPFAIL tracepoint was recently extended to report ECAPMODE
capability violations for processes that do not enter capability mode.
This allows developers that are interested in Capsicumizing their
programs to determine where violations are being raised.
Previously, CAPFAIL only produced output for processes using Capsicum(4)
capabilties. Thus, most ktrace users never received log output from the
trace point. With the recent changes, this is no longer the case.
Having this trace point enabled by default will produce output for all
processes that use syscalls that are not permitted in capability mode.
This may lead to confusion for users that are not familiar with the
feature. Remove KTRFAC_CAPFAIL from ktrace's default points to avoid
this.
Approved by: markj (mentor)
Reviewed by: markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D44887
1. Currently, distfetch checks environment variables existence
when it will use them or in a case (in chdir()) it doesn't check
at all. As they are necessary to set before doing anything with
it, check them, if they set or not, before proceeding any further.
This also avoids extra cleaning when that environment variable
isn't set.
2. Handle memory allocation error in malloc(PATH_MAX) and replace
(sizeof const char *) with (sizeof char *). Both are similar and
const doesn't have a size.
3. Indent the error message a bit in chdir().
Signed-off-by: rilysh <nightquick@proton.me>
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/1071
Use efiboot0 for the EFI partition, the nomenclature efiboot + #index
was taken from bsdinstall (zfsboot).
Use cfg for the cfg partition. Poudriere firmware images are already
using this label.
PR: 278480
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/1187
Since config(8) searches sys/conf by default, there's no need to specify
the full relative path here; replace it by the filename alone.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/1124
The new sys/conf/std.debug contains the list of debugging options
enabled by default in -CURRENT, so they don't need to be listed
individually in every kernel config.
The enabled options are the set of all debug options which were enabled
for the GENERIC kernel on any platform. This means some architectures
now have debugging options enabled in GENERIC which weren't previously
enabled:
- amd64: [1]
- arm64: [2]
- arm: [2]. [3]
- i386: [1], [2]
- powerpc: [1], [2], [3]
- riscv: [2]
[1] ALT_BREAK_TO_DEBUGGER is now enabled.
[2] BUF_TRACKING, FULL_BUF_TRACKING, and QUEUE_MACRO_DEBUG_TRASH are now
enabled.
[3] DEADLKRES is now enabled.
While here, move the documentation for the (commented out) K*SAN options
for amd64 from GENERIC to NOTES.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/1124
pf.ko, when built as a module without 'options INET' but with 'options
VIMAGE', won't load:
link_elf_obj: symbol vnet_entry_in_loopback_mask undefined
This is because it uses IN_LOOPBACK(), which in the VIMAGE case uses
INET-specific symbols.
Fix by making this check conditional on #ifdef INET.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/1157
When disabling a lun there can still be outstanding AIOs and INOTs, when
this happens previously the lun would just fail to disable and trying to
re-use the lun would break the card.
isp(4) in target mode does the same thing when disabling a lun, in
testing this allows re-starting of ctld(8) with connected initiators and
allows initiators to gracefully resume afterwards.
Signed-off-by: HP van Braam <hp@tmm.cx>
Reviewed by: imp, mav
Pull Request: https://github.com/freebsd/freebsd-src/pull/1190
Linux removed theirs starting in 2018 in commit:
"scsi: aic7xxx: Fix build using bare-metal toolchain"
Also remove now-useless sys/cdefs.h includes
Signed-off-by: HP van Braam <hp@tmm.cx>
Reviewed by: imp, mav, emaste
Pull Request: https://github.com/freebsd/freebsd-src/pull/1189
A compiler clever enough to know that z is positive with a non-zero
biased exponent could, for example, optimize away the scalbnf(z,n) in
pow() because behavior for left shift of negative values is undefined.
`n` is negative when y*log2(|x|) < -0.5. i.e. |x^y| < sqrt(0.5)
The intended behavior for operator<< in this code is to shift the two's
complement representation of the first operand.
In the pow() functions, the result is added to the IEEE 754 exponent of
z = 2^y'. n may be negative enough to underflow the biased IEEE 754
exponent below zero, which is manifested in the sign bit of j
(which would correspond to the IEEE 754 sign bit).
The conversion from uint32_t to int32_t for out-of-int32_t-range values
is implementation defined. The assumed behavior of interpreting the
uint32_t value as a two's complement representation of a signed value
is already assumed in many parts of the code, such as uses of
GET_FLOAT_WORD() with signed integers.
This code passes all the current tests, and makes some out of tree
fuzzing tests pass again rather than hit UB (detailed in the commentary
of the pull request).
Signed-off-by: Karl Tomlinson <karlt+@karlt.net>
Reviewed by: imp, steve kargl, dim
Pull Request: https://github.com/freebsd/freebsd-src/pull/1137
