Commit graph

96775 commits

Author SHA1 Message Date
Bruce A. Mah 3a956a7f32 New release note: acpi(4) idle state support.
Submitted by:	njl
Approved by:	re (implicitly)
2003-11-21 01:23:20 +00:00
Tom Rhodes 381fd5b439 Bring in a new manual page, ncv.4, and attach it to the build.
Based on an original version submitted by:	non

Approved by:	re (scottl)
2003-11-21 00:55:11 +00:00
Peter Wemm b4bae2b0c5 Argh! Followup to previous commit. I checked in the patch with an
unintended local change.  Change Xurthread back to curthread.
2003-11-20 23:49:28 +00:00
Peter Wemm c287f723c4 MFamd64: use a less compiler-intensive MD implementation of 'curthread'
so that the compiler doesn't have to do so much work.

Approved by:  re (jhb)
2003-11-20 23:23:22 +00:00
Peter Wemm 5dd883833c Provide a streamlined '#define curthread __curthread()' for amd64 to avoid
the compiler having to parse and optimize the PCPU_GET(curthread) so often.
__curthread() is an inline optimized version of PCPU_GET(curthread) that
knows that pc_curthread is at offset zero in the pcpu struct.  Add a
CTASSERT() to catch any possible changes to this.  This accounts for
just over a 1% wall clock speedup for total kernel compile/link time,
and 20% compile time speedup on some specific files depending on which
compile options are used.

Approved by:  re (jhb)
2003-11-20 22:54:44 +00:00
Peter Wemm de8e370ec1 Allow the MD backend to provide an alternative to
#define curthread PCPU_GET(curthread)
since its so heavily used in the kernel and ripe for compile-speed
optimization on some platforms.
2003-11-20 22:50:26 +00:00
John Baldwin 3500189b0e Fix a typo in my patches to support extended IRQ resources that broke the
type checking for _PRS for a link device's interrupt resources.

Approved by:	re (scottl)
2003-11-20 22:21:51 +00:00
Andre Oppermann fc906dd88f Introduce tcp_hostcache and remove the tcp specific metrics from
the routing table.  Move all usage and references in the tcp stack
from the routing table metrics to the tcp hostcache.

It caches measured parameters of past tcp sessions to provide better
initial start values for following connections from or to the same
source or destination.  Depending on the network parameters to/from
the remote host this can lead to significant speedups for new tcp
connections after the first one because they inherit and shortcut
the learning curve.

tcp_hostcache is designed for multiple concurrent access in SMP
environments with high contention and is hash indexed by remote
ip address.

It removes significant locking requirements from the tcp stack with
regard to the routing table.

Reviewed by:	sam (mentor), bms
Reviewed by:	-net, -current, core@kame.net (IPv6 parts)
Approved by:	re (scottl)
2003-11-20 21:47:20 +00:00
John Baldwin d784bc82f2 Try all of the possible interrupts for a link device when programming
boot-disabled devices instead of skipping the last interrupt.  This is
especially important for devices that only have one interrupt as this
bug was keeping any interrupt from being tried at all.

Reviewed by:	msmith
Approved by:	re (scottl)
2003-11-20 21:23:49 +00:00
John Baldwin 1ca261efe1 Add Greek keymaps to sysinstall.
PR:		bin/59078
Submitted by:	Panagiotis Astithas <past@noc.ntua.gr>
Approved by:	re (rwatson)
2003-11-20 20:43:06 +00:00
John Baldwin e3ba3497a3 Fix a typo that broke one of the Greek keyboard maps.
PR:		bin/59078
Submitted by:	Panagiotis Astithas <past@noc.ntua.gr>
Approved by:	re (rwatson)
2003-11-20 20:41:12 +00:00
John Baldwin 9778a4e0c3 Update the size of the OS string table that wasn't updated in the previous
commit that removed the UNIX entry.

Submitted by:	Rudolf Cejka <cejkar@fit.vutbr.cz>
Approved by:	re (rwatson)
2003-11-20 20:28:18 +00:00
Andre Oppermann 97d8d152c2 Introduce tcp_hostcache and remove the tcp specific metrics from
the routing table.  Move all usage and references in the tcp stack
from the routing table metrics to the tcp hostcache.

It caches measured parameters of past tcp sessions to provide better
initial start values for following connections from or to the same
source or destination.  Depending on the network parameters to/from
the remote host this can lead to significant speedups for new tcp
connections after the first one because they inherit and shortcut
the learning curve.

tcp_hostcache is designed for multiple concurrent access in SMP
environments with high contention and is hash indexed by remote
ip address.

It removes significant locking requirements from the tcp stack with
regard to the routing table.

Reviewed by:	sam (mentor), bms
Reviewed by:	-net, -current, core@kame.net (IPv6 parts)
Approved by:	re (scottl)
2003-11-20 20:07:39 +00:00
Andre Oppermann 26d02ca7ba Remove RTF_PRCLONING from routing table and adjust users of it
accordingly.  The define is left intact for ABI compatibility
with userland.

This is a pre-step for the introduction of tcp_hostcache.  The
network stack remains fully useable with this change.

Reviewed by:	sam (mentor), bms
Reviewed by:	-net, -current, core@kame.net (IPv6 parts)
Approved by:	re (scottl)
2003-11-20 19:47:31 +00:00
Christian Brueffer 3257da0c40 o Use manpage entity for xe(4)
o Various grammar fixes

Approved by:	re (bmah)
2003-11-20 19:39:53 +00:00
Bruce A. Mah 5ba49552e6 New release note: sparc64 syscons(4) support [1]
Modified release note:  mount_udf(8) -C. [2]

Submitted by:	kris [1], "R. Imura" <imura@ryu16.org> [2]
Approved by:	re (implicitly)
2003-11-20 17:07:59 +00:00
Marcel Moolenaar 1fc7ca0fb1 Set the ACPI processor Id in the PCPU structure so that CPU idling
on SMP systems has a chance of working. This was a loose end of the
implementation of the ACPI Cx idle states. Since our logical CPU Id
is the ACPI processor Id, we do not need to jump through hoops to
obtain it.

Approved: re@ (jhb)
2003-11-20 16:42:39 +00:00
Mark Murray 4e3a7a14d9 Fix a major faux pas of mine. I was causing 2 very bad things to
happen in interrupt context; 1) sleep locks, and 2) malloc/free
calls.

1) is fixed by using spin locks instead.

2) is fixed by preallocating a FIFO (implemented with a STAILQ)
   and using elements from this FIFO instead. This turns out
   to be rather fast.

OK'ed by:	re (scottl)
Thanks to:	peter, jhb, rwatson, jake
Apologies to:	*
2003-11-20 15:35:48 +00:00
Maxim Sobolev 9e95548c30 Fix a bug which causes wrong filename being written into the syslog
in the case when client sends request with RFC2347 options.

Approved by:	re
MFC After:	2 weeks
2003-11-20 13:36:31 +00:00
Maxim Konovalov dbf7b38125 Fix an arguments order in check_uidgid() call.
PR:		kern/59314
Submitted by:	Andrey V. Shytov
Approved by:	re (rwatson, jhb)
2003-11-20 10:28:33 +00:00
Dag-Erling Smørgrav 94b4c9762f This commit was generated by cvs2svn to compensate for changes in r122912,
which included commits to RCS files with non-trunk default branches.
2003-11-20 07:55:08 +00:00
Dag-Erling Smørgrav 47f63312c5 MFP4: fix confusion about the layout of resp (#42758)
Approved by:	re (rwatson)
2003-11-20 07:55:08 +00:00
Alfred Perlstein 1672bb6710 Remove unneeded file. (could be repo removed as nothing ever referenced it.)
Submitted by: Jim Rees <rees@umich.edu>
2003-11-20 04:42:50 +00:00
Robert Watson a5ca5c1a75 A variety of content cleanups:
(1) Document the notion of using jail(8) to run "virtual servers" or
    just to constrain specific applications.  If only running specific
    applications, some configuration steps are unnecessary (such as
    editing rc.conf).

(2) Add some more subsection headers to break up the bigger chunks of
    text.

(3) Clarify the problems associated with applications binding all IP
    addresses in the host, and attempt to be more specific about
    potential application problems.  Document how to force sshd to
    bind the the right socket.

(4) Suggest that in a jailed application scenario, you might want to
    have the host syslogd listen on the socket in the jail, rather
    than running syslogd in the jail.

(5) Catch another reference to /stand/sysinstall.

Approved by:	re (bmah implicitly)
2003-11-20 03:47:50 +00:00
Robert Watson 9395ecb1cf No need to copy sysinstall into a jail with -CURRENT, since in
-CURRENT, we have /usr/sbin/sysinstall.

Approved by:	re (bmah implicitly)
2003-11-20 02:46:44 +00:00
Sam Leffler 57053a10cf eliminate an unnecessary 8Kbyte bzero that was being done for each
submitted operation

Submitted by:	Thor Lancelot Simon
Reviewed by:	jhb
Approved by:	re (jhb)
2003-11-19 22:42:34 +00:00
Nate Lawson 39330d77d4 Clean up one more sentence that was wrapped unnecessarily.
Approved by:	re (implicitly)
2003-11-19 20:37:15 +00:00
Nate Lawson 1e14834ae3 Update the man page for hw.acpi.reset_video and a few mdoc(7) cleanups.
Submitted by:	Andreas Kohn <andreas.kohn@gmx.net>
Approved by:	re (implicitly)
2003-11-19 20:30:18 +00:00
Nate Lawson c25a3f8a7a Improve the section on Cx states, documenting the removal of -1 as a
valid value for cx_lowest.  To disable sleeping, use machdep.cpu_idle_hlt
instead.  Update the version of the ACPI spec we implement.

Approved by:	re (implicitly)
2003-11-19 20:28:56 +00:00
Nate Lawson 56a70eadf5 * Add a DEVMETHOD for acpi so that child detach methods get called. Add
an acpi_cpu method for shutdown that disables entry to acpi_cpu_idle
  and then IPIs/waits for threads to exit.  This fixes a panic late in
  reboot in the SMP case.

* In the !SMP case, don't use the processor id filled out by the MADT
  since there can only be one processor.  This was causing a panic in
  acpi_cpu_idle if the id was 1 since the data was being dereferenced from
  cpu_softc[1] even though the actual data was in cpu_softc[0] (which is
  correct).

* Rework the initialization functions so that cpu_idle_hook is written
  late in the boot process.

* Make the P_BLK, P_BLK_LEN, and cpu_cx_count all softc-local variables.
  This will help SMP boxes that have _CST or multiple P_BLKs.  No such
  boxes are known at this time.

* Always allocate the C1 state, even if the P_BLK is invalid.  This means
  we will always take over idling if enabled.  Remove the value -1 as
  valid for cx_lowest since this is redundant with machdep.cpu_idle_hlt.

* Reduce locking for the throttle initialization case to around the write
  to the smi_cmd port.  Add disabled code to write the CST_CNT.  It will
  be enabled once _CST re-evaluation is tested (post 5.2R).

Thank you:	dfr, imp, jhb, marcel, peter
Tested by:	rwatson, Harald Schmalzbauer <h@schmalzbauer.de>
Approved by:	re (rwatson)
2003-11-19 20:27:06 +00:00
Gordon Tetlow dc59303d62 Make init statically linked by default. It's not worth the pain of having
a dynamically linked init as recently seen by ia64 woes.

Approved by:	re (jhb)
2003-11-19 19:57:20 +00:00
Alan Cox 1cd5fbd854 - Avoid a lock-order reversal between Giant and a system map mutex that
occurs when kmem_malloc() fails to allocate a sufficient number of vm
   pages.  Specifically, we avoid the lock-order reversal by not grabbing
   Giant around pmap_remove() if the map is the kmem_map.

Approved by:	re (jhb)
Reported by:	Eugene <eugene3@web.de>
2003-11-19 18:48:45 +00:00
Peter Wemm b8aeddf146 Sync with i386.
- turn on SMP in generic
- add 'device atpic' - this is unconditional on i386, but certain nvidia
  based systems need to disable acpi because the reference bios seems to be
  hosed.  If acpi is disabled, we won't find the apic.  amd64 has the
  mptable code in a seperate compile option as well.
- turn sym back on, it doesn't fail to compile anymore.

Approved by: re
2003-11-19 18:11:27 +00:00
Marcel Moolenaar bd8477d623 Force a staticly linked /bin and /sbin for ia64. The necessary changes
to gcc have not been made for ia64, which means that executables still
have /usr/libexec/ld-elf.so.1 as the dynamic linker. This simply does
not work if /usr is a seperate filesystem not mounted when the kernel
tries to execute init(8).

Note that this is a temporary fix until a new gcc has been imported
that does have the required changes.

Approved: re@
2003-11-19 16:59:00 +00:00
Diomidis Spinellis 434c74760f Fix problem where initgroups would silently truncate groups with
more than NGROUP elements without providing the opportunity to
setgroups to fail and correctly return error and set errno.

MFC after:	2 weeks
2003-11-19 15:51:26 +00:00
John Baldwin 6006b8f4c6 Add a special check for a stray IRQ 7 or IRQ 15 to see if it is actually
a spurious interrupt from one of the 8259As.  If so, don't log it as a
stray IRQ, but just silently ignore it.

Approved by:	re (rwatson)
2003-11-19 15:40:23 +00:00
John Baldwin 8c770ed571 - Add counts to the ATPIC interrupt sources and point the ATPIC interrupt
source count pointers at them so that intr_execute_handlers() won't
  choke when it tries to handle an unregisterd ATPIC interrupt source.
- Install the low-level ATPIC interrupt handlers when we first program the
  ATPIC in atpic_startup() rather than at SI_SUB_INTR.  This is only
  necessary to work around buggy code that enables interrupts too early
  in the boot process (namely, the vm86 code).

Approved by:	re (rwatson)
2003-11-19 15:38:56 +00:00
Poul-Henning Kamp dbed417dab Off by one error in malloc.
Approved by:	re@
2003-11-19 15:28:21 +00:00
Diomidis Spinellis 988d4dc315 Documented missing EINVAL errno value
kern_prot.c:
if (ngrp > NGROUPS)
	return (EINVAL);

MFC after:	2 weeks
2003-11-19 13:05:50 +00:00
Warner Losh 3193579b66 o Remove @- from the ln and change it to a -sf. This was bogus, and
regocnized as such at the time.  Now that the other bogons in the
  tree have been fixed, we can remove this ugly kludge.
o Remove stale/bogus opt_foo.h files.  These are left over from
  by-gone resources.  And they point to the need, yet again, to
  improve the build system so meta information is only in one place.

Submitted by: ru
Reviewed by: bde
Approved by: re@ (jhb)
2003-11-19 05:08:27 +00:00
Alexander Kabaev c391349841 Fix vnode locking in fdesc_setattr. Lock vnode before invoking
VOP_SETATTR on it.

Approved by:	re@ (rwatson)
2003-11-19 04:14:42 +00:00
Alexander Kabaev 501f5ff123 Do not call VOP_GETATTR in getdents function. It does not serve any
purpose and the resulting vattr structure was ignored. In addition,
the VOP_GETATTR call was made with no vnode lock held, resulting in
vnode locking violation panic with debug kernels.

Reported by:	truckman

Approved by:	re@ (rwatson)
2003-11-19 04:12:32 +00:00
Archie Cobbs f6a1906569 Lower the maximum ACK timeout for GRE packets from 10 to 1 second.
In practice it seems that in situations of high packet loss the ACK
timeout seems to hit this maximum (perhaps inappropriately, but the
estimation algorithm is not perfect, so apparently it happens). In
any case, 10 seconds is way too high a value so lower to 1 second.

MFC after:	3 days
2003-11-18 20:43:23 +00:00
Poul-Henning Kamp 0eb1430969 Use the class->init() to hitch up preload devices, rather than rely on
the "old" SYSINIT.  This makes sure things happen in the right order.

XXX: md(4) needs to be fully geom-ified and in particluar /dev/md.ctl
should be abandonded for the GEOM OaM api.

Approved by:	re@
2003-11-18 18:19:26 +00:00
Poul-Henning Kamp 0ecc7670a9 Call class->init() an class->fini() while the class is hooked up,
rather than right before and right after.  This allows these routines
to manipulate the mesh.

KASSERT that nobody creates a geom on an alien class.

Assert topology in g_valid_obj().

Approved by:	re@
2003-11-18 18:17:39 +00:00
Søren Schmidt f584b21960 Add support for the SiS964 ATA/SATA southbridge.
This could not have been done without the support from kuriyama.

Approved by: re@
2003-11-18 15:27:28 +00:00
Søren Schmidt d7536ac93e Work around the problem that some CDROM drives might return different
TOC's for the same media!! that borks up GEOM.
Although this looks like bad HW the following patch removes the
chance for GEOM panic'ing.

Approved by: re@
2003-11-18 15:23:37 +00:00
Mark Murray 3fed54aaaa Hackfix to patch around a kernel panic I introduced. Real fix to
follow. In the meanwhile, we are not harvesting interrupt entropy.

Approved by:	re (jhb)
2003-11-18 14:35:43 +00:00
Jake Burkholder eaf21f315e Install the user trap handlers that libc provides from a constructor, so
that they will be installed before application constructors are invoked.
Its possible to link applications such that this fails, application code
is invoked before they are installed, but, well, Don't Do That.

Approved by:	re (jhb)
2003-11-18 14:21:41 +00:00
Tim J. Robbins 7e1985fcd8 Replace the dangerous strcpy() call with strlcpy(), instead of the safe one
that was incorrectly changed in rev. 1.61.

Approved by:	re
2003-11-18 14:21:34 +00:00