- 6to4(stf) interface configuration.
- Static route configuration.
- Comment additions.
- Replaced a still existed '@' to '%' in IPv6 scoped addr format.
(This became necessary as previous IPv6 scoped addr format change.)
Much thanks to ume, who helped me reviewing, testing, and finding problems
with these changes.
Approved by: jkh
Reviewed by: ume
number was packed very wastefully, giving perfect non-uniqeness in
the lower 16 bits of fsids for filesystems with the same vfs type.
This made linux_stat() return perfectly non-unique (broken) 16-bit
st_dev's for nfs mount points, and effectively reduced mntid_base to
8 bits so that the vfs_getnewfsid() looped endlessly when there are
already 256 mounted filesystems with the required vfs type.
Approved by: jkh
for a scheduling boost. This is a conservative change that should
make no difference in practice and eliminate concerns about this being
the source of some SMP hangs.
Configuration scripts should never auto-configure P1003.1B
without a second test. The behavior with respect to regular time
sharing, who can access it, etc., is not defined.
Approved by: jkh
"ndp" command should deletes only neighbor cache entries, but the
program lacks necessary "return" after the neighbor cache
entry check, so it might deletes non neighbor cache entries.
(it seems that usually no problem happens.)
Approved by: jkh
Reviewed by: ume
don't support routes with sin6_scope_id set.
Without this fix, routes with IPv6 scoped addr won't work when it is
assigned by "route" command.
Approved by: jkh
Reviewed by: ume
print an error message which say, "include netinet/ip6.h".
This is postponed to apply to avoid tcpdump compile error.
Now apply this because tcpdump has been already fixed.
Approved by: jkh
Obtained from: KAME project
we get the com address. If so, we go ahead and return. Bruce thinks
there's a bug in the pccard layer that it terminates devices with
extreme prejustice rather than letting them deside for themselves when
to terminate (and he's likely right). This fix doesn't change that,
but instead works around it by checking for NULL pointers at more
places than before.
The detach routine still calls functions at interrupt level that
aren't reentrant. In theory this could cause a problem, but none
showed up in practice. Future versions should correct this problem,
likely by making the detach process a thread/process at the pccard
level. NEWCARD will do this, and the current pccard layer should
likely be modified to that as well, should it live long enough.
A few style nits of the same form that were in my original patch sent
off to bde were also fixed as part of this process. Mostly use of
!ptr and return ENOPARENS.
This should prevent a crash on suspend with an active ppp link as
well, but that wasn't tested.
Reviewed by: bde
Approved by: jkh
There was a missing description for a new flags to netstat.
I already added the fix to netstat man, but usage() change is
also necessary.
Specified by: Ben Smithurst <ben@scientia.demon.co.uk>
Approved by: jkh
to avoid error messages printed on /var/log/messages.
Recently added "stf" interface has IFF_MULTICAST bit set,
because IPv6 don't work on non IFF_MULTICAST set interfaces
in current implementation.
But "stf" interface is multi-dest IPv6 over IPv4 tunnel, so
can't treat multicast packet with no special configuration.
On the other hand, tools like "rtadvd", "pim6dd", "pim6sd"
send messages on IFF_MULTICAST set interfaces by default.
So there will be many bogus error message on /var/log/messages,
that multicast packets sent to "stf0" failed.
So,
-strip "stf0" from rtadvd sending interfaces in rc.network6
("rtadvd" is a daemon used only for local subnet, so it
will never need to send its packets over "stf0" interfaces.)
-Add default configuration files for "pim6dd" and "pim6sd",
and disable "stf0" in those files.
Approved by: jkh
icmp6 error statistics based on sending interface.
This also prevent kernel panic when rcvif is not initialized after M_PKTHDR().
(The initialization issue also need to be fixed in the future.)
Approved by: jkh
Submitted by: k-sugyou@kame.net
requires current and desired network parameters, so I have created a network parameter structure and used two on them in the softc. This gives a bit of room of expansion. Re-wrote the update check in _net to work with this.
Tidyed up softc due to above.
Removed startccs and startcmd as they were only used by NetBSDs startup timeout.
Sockstat use netstat tcp/udp socket print, and fstat tcp/udp
socket print, but it just specify all of IPPROTO_IP and
IPPROTO_IPV6 sockets for fstat.
Now IPv6 socket also use raw socket, but only netstat don't print it,
so now they are printed as empty entries in sockstat output.
Approved by: jkh
(Last commit message is not related to this file. This file is mistakenly
committed with last commit of other files.)
Prevent possible kernel panic at tcp_input().
When some IPv4 apps do setsockopt() to control message receipt,
then kernel will panic at control message creation processing.
(Currently, only bgp daemon in KAME package known to cause the problem.)
Submitted by: jinmei@kame.net
Now most big problem of IPv6 is getting IPv6 address
assignment.
6to4 solve the problem. 6to4 addr is defined like below,
2002: 4byte v4 addr : 2byte SLA ID : 8byte interface ID
The most important point of the address format is that an IPv4 addr
is embeded in it. So any user who has IPv4 addr can get IPv6 address
block with 2byte subnet space. Also, the IPv4 addr is used for
semi-automatic IPv6 over IPv4 tunneling.
With 6to4, getting IPv6 addr become dramatically easy.
The attached patch enable 6to4 extension, and confirmed to work,
between "Richard Seaman, Jr." <dick@tar.com> and me.
Approved by: jkh
Reviewed by: itojun
keyboard port and interrupt is enabled and the driver is attached even
when the keyboard itself is not present when the system is booting.
(This has been the behavior through out 2.X and 3.X, but is somehow
broken in 4.0.)
# I certainly don't recommend people to `hot-plug' the AT keyboard,
# because the interface isn't designed for hot-plugging and such act
# will often break the keyboard controller. But, so many people want to
# do that anyway...
Approved by: jkh
ARP packets. This can incorrectly reject complete frames since the frame
could be stored in more than one mbuf.
The following patches fix the length comparisson, and add several
diagnostic log messages to the interrupt handler for out-of-the-norm ARP
packets. This should make ARP problems easier to detect, diagnose and
fix.
Submitted by: C. Stephen Gunn <csg@waterspout.com>
Approved by: jkh
Reviewed by: rwatson
