existed before IOCTL code refactoring merged change 4445fffb from illumos
at r248571.
This change allows `zpool clear` to be used again to recover suspended pool.
It seems the only was supposed by the code to restore pool operation after
reconnecting lost disks that were required for data completeness. There
are still cases where `zpool clear` command can just safely stuck due to
deadlocks inside ZFS kernel part, but probably that is better then having
no chances to recover at all.
This patch implements __get_cpuid_max() as an inline and __cpuid()
and __cpuid_count() as macros to be compatible with GCC's cpuid.h.
It also adds bit_<foo> constants for the various feature bits as
described in version 039 (May 2011) of Intel's SDM Volume 2 in the
description of the CPUID instruction. The list of bit_<foo>
constants is a bit exhaustive (GCC doesn't do near this many). More
bits could be added from a newer version of SDM if desired.
Patch by John Baldwin!
This should fix several ports which depend on this functionality being
available.
MFC after: 1 week
Support chipsets are the Realtek RTL8188SU, RTL8191SU, and RTL8192SU.
Many thanks to Idwer Vollering for porting/writing the man page and for
testing.
Reviewed by: adrian, hselasky
Obtained from: OpenBSD
Tested by: kevlo, Idwer Vollering <vidwer at gmail.com>
* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option.
The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.
* random(4) device doesn't really depend on rijndael-*. Yarrow, however, does.
* Add random_adaptors.[ch] which is basically a store of random_adaptor's.
random_adaptor is basically an adapter that plugs in to random(4).
random_adaptor can only be plugged in to random(4) very early in bootup.
Unplugging random_adaptor from random(4) is not supported, and is probably a
bad idea anyway, due to potential loss of entropy pools.
We currently have 3 random_adaptors:
+ yarrow
+ rdrand (ivy.c)
+ nehemeiah
* Remove platform dependent logic from probe.c, and move it into
corresponding registration routines of each random_adaptor provider.
probe.c doesn't do anything other than picking a specific random_adaptor
from a list of registered ones.
* If the kernel doesn't have any random_adaptor adapters present then the
creation of /dev/random is postponed until next random_adaptor is kldload'ed.
* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a
system wide one.
Submitted by: arthurmesh@gmail.com, obrien
Obtained from: Juniper Networks
Reviewed by: obrien
* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option.
The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.
* random(4) device doesn't really depend on rijndael-*. Yarrow, however, does.
* Add random_adaptors.[ch] which is basically a store of random_adaptor's.
random_adaptor is basically an adapter that plugs in to random(4).
random_adaptor can only be plugged in to random(4) very early in bootup.
Unplugging random_adaptor from random(4) is not supported, and is probably a
bad idea anyway, due to potential loss of entropy pools.
We currently have 3 random_adaptors:
+ yarrow
+ rdrand (ivy.c)
+ nehemeiah
* Remove platform dependent logic from probe.c, and move it into
corresponding registration routines of each random_adaptor provider.
probe.c doesn't do anything other than picking a specific random_adaptor
from a list of registered ones.
* If the kernel doesn't have any random_adaptor adapters present then the
creation of /dev/random is postponed until next random_adaptor is kldload'ed.
* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a
system wide one.
Submitted by: arthurmesh@gmail.com, obrien
Obtained from: Juniper Networks
Reviewed by: obrien
- Remove an incorrect assertion that can trigger when downing an interface.
- Stop the interface during detach to avoid panics when unloading the
driver.
- A few locking fixes to be more consistent with other FreeBSD drivers:
- Protect if_drv_flags with the driver lock, not atomic ops
- Hold the driver lock when adjusting multicast state.
- Hold the driver lock while adjusting if_capenable.
PR: kern/180791 [1,2]
Submitted by: Shakar Klein @ Mellanox [1,2]
MFC after: 3 days
OpenSolaris version is:
13108:33bb8a0301ab
6762020 Disassembly support for Intel Advanced Vector Extensions (AVX)
This corresponds to Illumos-gate (github) version
ab47273fedff893c8ae22ec39ffc666d4fa6fc8b
MFC after: 3 weeks
LLAs on the member interfaces are actually harmless when the parent
interface does not have a LLA.
- Add net.link.bridge.allow_llz_overlap. This is a knob to allow LLAs on
a bridge and the member interfaces at the same time. The default is 0.
Pointed out by: ume
MFC after: 3 days
must be destroyed, knlist_clear() and seldrain() calls could be
avoided, since vpollinfo was not used. More, the knlist_clear()
calling protocol requires the knlist locked, which is not true at the
call site.
Split the destruction into the helper destroy_vpollinfo_free(), and
call it when raced, instead of destroy_vpollinfo().
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
components: apr-1.4.6 -> 1.4.8 and apr-util-1.4.1 -> 1.5.2.
This is a post point-zero bug-fix / fix-sharp-edges release, including
some workarounds for UTF-8 for people who haven't yet turned on WITH_ICONV.
the normal and the mesh transmit paths can use.
The API is a bit horrible because it both consumes the mbuf and frees
the node reference regardless of whether it succeeds or not.
It's a hold-over from how the code behaves; it'd be nice to have it
not free the node reference / mbuf if TX fails and let the caller
decide what to do.
