According to 0mp, macros are not expanded in the argument provided to
-width. Use plain identifiers for width specification.
Noted and reviewed by: 0mp
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D19308
The file has not been touched upstream in over a decade, and the nature
of the code means that a lot of FreeBSD-specific bits are required. Remove
the dead code to improve readability. No functional change intended.
Discussed with: cem
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
No platforms except i386, amd64 and powerpc implement fasttrap; the
fasttrap files for other arches do not contain any code and bloat
the output from cscope, so just remove them.
MFC after: 1 week
No map function was provided before so every regulator lookup resolved
the regulator with id 1, as it uses the default mapper, which is wrong.
Correctly map the regulators.
While here remove some debug printfs and make them disable by default.
MFC after: 1 week
RockChip clocks register have a write mask in the upper 16 bits, if a 1
is present the corresponding bit in the lower 16 ones is set.
Use this instead of always setting the mask to 0xFFFF0000.
This avoids a read of the register.
While here, when switching PLL frequency, first switch it to slow mode.
When set to slow mode the PLL clock will be the external oscillator.
Changing the PLL parameters while its output is used can cause hang (sometimes).
MFC after: 1 week
RockChip clocks register have a write mask in the upper 16 bits, if a 1
is present the corresponding bit in the lower 16 ones is set.
Use this instead of always setting the mask to 0xFFFF0000.
This avoids a read of the register.
While here set the parent after changing its freqeuncy, this reduce the time
between changing the parent and changing the divider for the arm clock.
MFC after: 1 week
RockChip clocks register have a write mask in the upper 16 bits, if a 1
is present the corresponding bit in the lower 16 ones is set.
Use this instead of always setting the mask to 0xFFFF0000.
This avoids a read of the register.
While here add some debug printf useful for debuging clock problems
MFC after: 1 week
Instead carefully write upper word, and only than the lower word with
PG_V, for previously invalid ptes. It provides some measurable system
time saving on buildworld.
Reviewed by: markj
Tested by: pho
Measured by: bde (early version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D19226
Non-x86 arches use an inconsistently named header for the file containing
"pc" attributes, and the ifdef messes to include the right header were out
of date in the 2 files that I added to the MI files list.
Only amd64, arm, i386, mips, powerpc and sparc64 are supposed to support
syscons. Only arm and mips were out of date in the ifdef. Test
coverage for of syscons in arm is broken (turned off) in NOTES, but
syscons is in some other arm config files which universe detects as broken.
arm64 and riscv remain broken due to the opposite bug of not turning off
sc in NOTES, the same as before r344458 (see r344443).
The header is MD to contain possibly-non-"pc" encodings of attributes, but
since the attributes are essentially virtual in graphics mode and non-x86
arches only support graphics mode, the header has always been the same on
all arches except for different style bugs, so there should be only 1 MI
copy of it for syscons' use. It was used in pcvt and still gives an an
API and an ABI, so it should be public and MI near or in sys/consio.h.
It was first implemented on Illumos and then ported to ZoL.
This patch is a port to FreeBSD of the ZoL version.
This patch also includes a fix for a race condition that was amended
With such patch Delphix has seen a huge decrease in latency of the mount phase
(https://github.com/openzfs/openzfs/commit/a3f0e2b569 for details).
With that current change Gandi has measured improvments that are on par with
those reported by Delphix.
Zol commits incorporated:
a10d50f999e63ac16d25
Reviewed by: avg, sef
Approved by: avg, sef
Obtained from: ZoL
MFC after: 1 month
Relnotes: yes
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D19098
This relies on libbearssl and libsecureboot
to verify files read by loader in a maner equivalent
to how mac_veriexec
Note: disabled by default.
Use is initially expected to be by embeded vendors
Reviewed by: emaste, imp
Sponsored by: Juniper Networks
Differential Revision: D16336
Implement ffs_getpages_async(), which when possible calls the asynchronous
flavor of the generic pager's getpages function. When the underlying
block size is larger than the system page size, however, it will invoke
the (synchronous) buffer cache pager, followed by a call to the client
completion routine. This retains true asynchronous completion in the most
common (block size <= page size) case, which is important for the performance
of the new sendfile(2). The behavior in the larger block size case mirrors
the default implementation of VOP_GETPAGES_ASYNC, which most other
filesystems use anyway as they do not override the getpages_async method.
PR: 235708
Reported by: pho
Reviewed by: kib, glebius
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19340
r328169 removed the copy of bootinfo that would've made this somewhat
functional. However, this is irrelevant- earlier work in r292338 was done to
exit boot services in the MI bi_load() rather than having N copies of the
GetMemoryMap/ExitBootServices dance.
i386 never quite caught up to that; ldr_enter was still being called but
the prereq for that, ldr_bootinfo, was no longer. As a consequence, this
ExitBootServices() was being called with a mapkey=0, clearly bogus, and
reportedly breaking the boot in some instances.
Reported by: bcran
MFC after: 1 week
Eliminate trailing whitespace on inet, inet6, and groups lines. I think the
"list txpower" command will still show some, but I'm not able to test that.
PR: 153731
Reported-by: Nikolay Denev <ndenev@gmail.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19004
to go to the FS image we are making cannot be read (e.g. EPERM).
Current behaviour when we issue waring but still proceeed and
return success is definitely not correct: masking out error
condition as well as making a slighly inconsistent FS where
attempt to access the file in question ends up in EBADF. See
linked DR for details.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18584
shorter than its size resulting in a hole as its final block (which
is a violation of the invarients of the UFS filesystem).
Soft updates will always ensure that the file size is correct when
writing inodes to disk for files that contain only direct block
pointers. However soft updates does not roll back sizes for files
with indirect blocks that it has set to unallocated because their
contents have not yet been written to disk. Hence, the file can
appear to have a hole at its end because the block pointer has been
rolled back to zero when its inode was written to disk. Thus,
fsck_ffs calculates the last allocated block in the file. For files
that extend into indirect blocks, fsck_ffs checks for a size past
the last allocated block of the file and if that is found, shortens
the file to reference the last allocated block thus avoiding having
it reference a hole at its end.
Submitted by: Chuck Silvers <chs@netflix.com>
Tested by: Chuck Silvers <chs@netflix.com>
MFC after: 1 week
Sponsored by: Netflix
Split the rights-limiting code into two cases: if one of the input
files isn't a regular file, use caph_limit_stream(3) instead of
open-coding the same logic; if both input files are regular files,
and the initial attempts to map them succeed, we limit the rights on
those files to CAP_MMAP_R.
Add a regression test for PR 234885.
PR: 234885
Reviewed by: delphij
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19216
On platforms without a direct map (i.e., platforms without
UMA_MD_SMALL_ALLOC defined), the boundary tag allocator reserves a
number of tags for use when allocating a new slab of boundary tags,
as such platforms require free boundary tags in order to allocate
boundary tags. r327899 increased the number of boundary tags required
for a KVA allocation in the worst case, and the aforementioned
reservation was not updated accordingly. In some cases, this could
lead to a system hang. Fix the problem by increasing this reservation.
Also reduce KVA_QUANTUM on systems lacking superpage support.
The previous import quantum (4MB with a 4KB page size) was quite large
for systems with limited KVA, and fragmentation in kernel_arena could
cause kernel memory allocation failures even with a substantial amount
of free KVA.
Reported and tested by: jhibbits
Reviewed by: alc, kib
No objections: jeff
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19337
the tag wasn't being computed properly due to chaning a >= comparison
to an == comparison.
Specifically: CBC-MAC encodes the length of the authorization data
into the the stream to be encrypted/hashed. For short data, this is
two bytes (big-endian 16 bit value); for larger data, it's 6 bytes
(a prefix of 0xff, 0xfe, followed by a 32-bit big-endian length). And
there's a larger size, which is 10 bytes. These extra bytes weren't
being accounted for with the post-review code. The other bit that then came
into play was that OCF only calls the Update code with blksiz=16, which
meant that I had to ignore the length variable. (It also means that it
can't be called with a single buffer containing the AAD and payload;
however, OCF doesn't do this for the software-only algorithsm.)
I tested with this script:
ALG=aes-ccm
DEV=soft
for aad in 0 1 2 3 4 14 16 24 30 32 34 36 1020
do
for dln in 16 32 1024 2048 10240
do
echo "Testing AAD length ${aad} data length ${dln}"
/root/cryptocheck -A ${aad} -a ${ALG} -d ${DEV} ${dln}
done
done
Reviewed by: cem
Sponsored by: iXsystems Inc.
Instead of PRIVATELIB + NO_PIC. This avoids the need for the wlandebug
PIE special case added in r344211, and provides a stronger guarantee
against 3rd party software coming to depend on the API or ABI.
If / when we declare the API/ABI to be stable we can make it a normal
library.
Discussed with: bapt
Sponsored by: The FreeBSD Foundation
RockChip clocks have a write mask in the upper 16bits of the mux register
which wasn't set in the set_mux function.
Also the wrong parent was tested instead of the real current one, when
switch parent, test with the current one before.
Pointy Hat: manu
MFC after: 1 week
Both SpiFlash (mx25l) and DataFlash (at45d) drivers create a disk device
with a name of /dev/flash/spiN where N is the driver's unit number. If
both types of devices are present in the same system, this creates a fatal
conflict that prevents attachment of whichever device attaches second
(because mx25l0 and at45d0 both try to create a spi0).
This gives each type of device a unique name (mx25lN or at45dN respectively)
and also adds an alias of spiN for compatibility. When both device types
appear in the same system, only the first to attach gets the spiN alias.
When the second device attaches there is a non-fatal warning that the alias
can't be created, but both devices are still accessible via their primary
names (and there is no need for the spiN name to work for backwards
compatibility on such a system, because it has never been possible to use
the spiN names when both devices exist).
jedec ID as its older cousin the AT45DB642D, but uses a different page size.
The only way to distinguish between the two chips is that the 2D chip has
0 bytes of extended ID info and the new 1E has 1 byte of extended ID. The
actual value of the extended ID byte is all zeroes. In other words, it's
the presence of the extended info that identifies this chip. (Presumably
a future upgrade might define non-zero values for the extended ID byte.)
- Do not use nvf = 4 as it is not really supported by the firmware.
Firmwares 1.23.3.0 and above will ignore it silently.
- Increase PF4's share of the VIs and let it use all of the RSS table.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
to match a chip to our table of metadata describing the chips. At least one
new DataFlash chip has a 3-byte jedec ID identical to its predecessors and
differs only in the extended info, and it has different metadata requiring a
unique entry in the table. This paves the way for supporting such chips.
The metadata table now includes two new fields, extmask and extid. The two
bytes of extended info obtained from the chip are ANDed with extmask then
compared to extid, so it's possible to use only a subset of the extended
info in the matching.
We now always read 6 bytes of jedec ID info. Most chips don't return any
extended info, and the values read back for those two bytes may be
indeterminate, but such chips have extmask and extid values of 0x0000 in the
table, so the extid effectively doesn't participate in the matching on those
chips and it doesn't matter what they return in the extended info bytes.
This fixes a panic during configuration if the tx channel of a port
isn't the same as its port id.
Reported by: Fabrice Bruel
MFC after: 1 week
Sponsored by: Chelsio Communications
Update the diff to include other missing sysctl types found in sysctl.h.
Some of these sysctls are already documented in other pages (e.g counter(9)
and ZONE(9)), but they should at least be mentioned here for completeness.
This patch now documents all of the following:
- SYSCTL_BOOL/SYSCTL_ADD_BOOL
- SYSCTL_COUNTER_U64/SYSCTL_ADD_COUNTER_U64
- SYSCTL_COUNTER_U64_ARRAY/SYSCTL_ADD_COUNTER_U64_ARRAY
- SYSCTL_SBINTIME_MSEC/SYSCTL_ADD_SBINTIME_MSEC
- SYSCTL_SBINTIME_USEC/SYSCTL_ADD_SBINTIME_USEC
- SYSCTL_UMA_CUR/SYSCTL_ADD_UMA_CUR
- SYSCTL_UMA_MAX/SYSCTL_ADD_UMA_MAX
Submitted by: mhorne063_gmail.com
Reviewed by: bcr, hselasky
Approved by: bcr (doc), hselasky (src)
Approved by: krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D19272
If an interrupt fires while writing the cmp entry we may have a partial
entry. Work around this by using atomic_cmpset to set the new index. If it
fails we need to set the previous index value and try again as the entry
may be in an inconsistent state.
This fixes messages similar to the following from syzkaller:
bad comp 224 type 2163727253
Reviewed by: tuexen
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19287
