boot.nfsroot.nfshandlelen and set the diskless root fs to
use NFSv3 and this file handle length when it is set. If
this environment variable is not set, the diskless root fs
will use NFSv2 and the same defaults as before. This fixes
the problem where the diskless nfs root fs had to be on a
FreeBSD server for NFSv3 to work, because it did not know
the correct file handle length and assumed the size used
by FreeBSD. Until pxeboot and loader are replaced by ones
built from commits coming soon, boot.nfsroot.nfshandlelen
will not be set by them and the diskless root fs will use
NFSv2 unless the /etc/fstab entry has the "nfsv3" option
specified.
Tested by: danny at cs.huji.ac.il
MFC after: 2 weeks
allmulti is toggled. Controller does not require reinitialization.
This removes unnecessary controller reinitialization whenever
tcpdump is used.
While I'm here remove unnecessary variable reinitialization.
configured TX/RX MACs before getting a valid link. After that, when
link state change callback is called, it called device
initialization again to reconfigure TX/RX MACs depending on
resolved link state. This hack created several bad side effects and
it required more hacks to not collide with sis_tick callback as
well as disabling switching to currently selected media in device
initialization. Also it seems sis(4) was used to be a template
driver for long time so other drivers which was modeled after
sis(4) also should be changed.
TX/RX MACs are now reconfigured after getting a valid link. Fix for
short cable error is also applied after getting a link because it's
only valid when the resolved speed is 100Mbps.
While I'm here slightly reorganize interrupt handler such that
sis(4) always read SIS_ISR register to see whether the interrupt is
ours or not. This change removes another hack and make it possible
to nuke sis_stopped variable in softc.
thread in a racy manner, which can lead to attempting to migrate a
thread that is pinned to a CPU. Instead, have sched_switch() determine
which CPU a thread should run on if the current one is not allowed.
KASSERT in sched_bind() that the thread is not yet pinned to a CPU.
KASSERT in sched_switch() that only migratable threads or those moving
due to a sched_bind() are changing CPUs.
sched_affinity code came from jhb@.
MFC after: 2 weeks
- add rm_try_rlock().
- add RM_SLEEPABLE to use sx(9) as the back-end lock in order to sleep while
holding the write lock.
- change rm_noreadtoken to a cpu bitmask to indicate which CPUs need to go
through the lock/unlock in order to synchronize. As a side effect, this
also avoids IPI to CPUs without any readers during rm_wlock.
Discussed with: ups@, rwatson@ on arch@
Sponsored by: Isilon Systems, Inc.
o Enforce TX/RX descriptor ring alignment. NS data sheet says the
controller needs 4 bytes alignment but use 16 to cover both SiS
and NS controllers. I don't have SiS data sheet so I'm not sure
what is alignment restriction of SiS controller but 16 would be
enough because it's larger than the size of a TX/RX descriptor.
Previously sis(4) ignored the alignment restriction.
o Enforce RX buffer alignment, 4.
Previously sis(4) ignored RX buffer alignment restriction.
o Limit number of TX DMA segment to be used to 16. It seems
controller has no restriction on number of DMA segments but
using more than 16 looks resource waste.
o Collapse long mbuf chains with m_collapse(9) instead of calling
expensive m_defrag(9).
o TX/RX side bus_dmamap_load_mbuf_sg(9) support and remove
unnecessary callbacks.
o Initial endianness support.
o Prefer local alignment fixup code to m_devget(9).
o Pre-allocate TX/RX mbuf DMA maps instead of creating/destroying
these maps in fast TX/RX path. On non-x86 architectures, this is
very expensive operation and there is no need to do that.
o Add missing bus_dmamap_sync(9) in TX/RX path.
o watchdog is now unarmed only when there are no pending frames
on controller. Previously sis(4) blindly unarmed watchdog
without checking the number of queued frames.
o For efficiency, loaded DMA map is reused for error frames.
o DMA map loading failure is now gracefully handled. Previously
sis(4) ignored any DMA map loading errors.
o Nuke unused macros which are not appropriate for endianness
operation.
o Stop embedding driver maintained structures into descriptor
rings. Because TX/RX descriptor structures are shared between
host and controller, frequent bus_dmamap_sync(9) operations are
required in fast path. Embedding driver structures will increase
the size of DMA map which in turn will slow down performance.
- set cache_coherent_dma flag in cpuinfo for XLR, this will make sure that
BUS_DMA_COHERENT flag is handled correctly in busdma_machdep.c
- iodi.c, call device_get_name() just once
- clear RMI specific EIRR while intializing CPUs
- remove debug print in intr_machdep.c
which also avoids NULL pointer arithmetic, as suggested by jhb. The
available space goes from 11 bytes to 7.
Reviewed by: nyan
Approved by: rpaulo (mentor)
module private type, when private type mutex is locked/unlocked, thread
critical region is entered or leaved. These changes makes fork()
async-signal safe which required by POSIX. Note that user's atfork handler
still needs to be async-signal safe, but it is not problem of libthr, it
is user's responsiblity.
some cases we want to improve:
1) if a thread signal got a signal while in cancellation point,
it is possible the TDP_WAKEUP may be eaten by signal handler
if the handler called some interruptibly system calls.
2) In signal handler, we want to disable cancellation.
3) When thread holding some low level locks, it is better to
disable signal, those code need not to worry reentrancy,
sigprocmask system call is avoided because it is a bit expensive.
The signal handler wrapper works in this way:
1) libthr installs its signal handler if user code invokes sigaction
to install its handler, the user handler is recorded in internal
array.
2) when a signal is delivered, libthr's signal handler is invoke,
libthr checks if thread holds some low level lock or is in critical
region, if it is true, the signal is buffered, and all signals are
masked, once the thread leaves critical region, correct signal
mask is restored and buffered signal is processed.
3) before user signal handler is invoked, cancellation is temporarily
disabled, after user signal handler is returned, cancellation state
is restored, and pending cancellation is rescheduled.
not change interrupt vector if it is not pointing the ROM itself. Actually,
we just fail shadowing altogether if that is the case because the shadowed
copy will be useless for sure and POST may not be relocatable or useful.
While I'm here, fix a debugging message under bootverbose, really. r211829
fixed one case but broke another. Mea Culpa.
or not by comparing reported TX consumer index with saved index. So
remove unnecessary check done after freeing transmitted mbufs.
While I'm here nuke unnecessary variable initializations.
tag. All controllers that are not BCM5755 or higher have 4GB
boundary DMA bug. Previously bge(4) used 32bit DMA address to
workaround the bug(r199670). However this caused the use of bounce
buffers such that it resulted in poor performance for systems which
have more than 4GB memory. Because bus_dma(9) honors boundary
restriction requirement of DMA tag for dynamic buffers, having a
separate TX/RX mbuf DMA tag will greatly reduce the possibility of
using bounce buffers. For DMA buffers allocated with
bus_dmamem_alloc(9), now bge(4) explicitly checks whether the
requested memory region crossed the boundary or not.
With this change, only the DMA buffer that crossed the boundary
will use 32bit DMA address. Other DMA buffers are not affected as
separate DMA tag is created for each DMA buffer.
Even if 32bit DMA address space is used for a buffer, the chance to
use bounce buffer is still very low as the size of buffer is small.
This change should eliminate most usage of bounce buffers on
systems that have more than 4GB memory.
More correct fix would be teaching bus_dma(9) to honor boundary
restriction for buffers created with bus_dmamem_alloc(9) but it
seems that is not easy.
While I'm here cleanup bge_dma_map_addr() and remove unnecessary
member variables in bge_dmamap_arg structure.
Tested by: marcel
gnu/lib/libobjc and sys/boot/i386/boot2, so it also works when using
absolute paths and/or options, as in CC="/absolute/path/clang -foo".
Approved by: rpaulo (mentor)
the existing code was very platform specific, and broken for SMP systems
trying to reboot from KDB.
- Add a new PLATFORM_RESET() method to the platform KOBJ interface, and
migrate existing reset functions into platform modules.
- Modify the OF_reboot() routine to submit the request by hand to avoid
the IPIs involved in the regular openfirmware() routine. This fixes
reboot from KDB on SMP machines.
- Move non-KDB reset and poweroff functions on the Powermac platform
into the relevant power control drivers (cuda, pmu, smu), instead of
using them through the Open Firmware backdoor.
- Rename platform_chrp to platform_powermac since it has become
increasingly Powermac specific. When we gain support for IBM systems,
we will grow a new platform_chrp.
