- All internal source files (except "examples", which are not internal)
should include "config.h" first. As also all internal source
files should include "nm-default.h", let "config.h" be included
by "nm-default.h" and include "nm-default.h" as first in every
source file.
We already wanted to include "nm-default.h" before other headers
because it might contains some fixes (like "nm-glib.h" compatibility)
that is required first.
- After including "nm-default.h", we optinally allow for including the
corresponding header file for the source file at hand. The idea
is to ensure that each header file is self contained.
- Don't include "config.h" or "nm-default.h" in any header file
(except "nm-sd-adapt.h"). Public headers anyway must not include
these headers, and internal headers are never included after
"nm-default.h", as of the first previous point.
- Include all internal headers with quotes instead of angle brackets.
In practice it doesn't matter, because in our public headers we must
include other headers with angle brackets. As we use our public
headers also to compile our interal source files, effectively the
result must be the same. Still do it for consistency.
- Except for <config.h> itself. Include it with angle brackets as suggested by
https://www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Headers
for verifying the secrets, because it is not done in plain nm_setting_verify().
For simple verification of free-form string secrets,
_nm_setting_verify_secret_string() helper is used.
The localization headers are now included via "nm-default.h".
Also fixes several places, where we wrongly included <glib/gi18n-lib.h>
instead of <glib/gi18n.h>. For example under "clients/" directory.
We must never fail verification of a connection based on a password
because the password is re-requested during activation.
Otherwise, if the user enters an invalid password for a (previously)
valid connection, the connection becomes invalid. NetworkManager does
not expect or handle that requesting password can make a connection
invalid.
Invalid passwords should be treated as wrong passwords. Only a UI
(such as nm-connection-editor or nmcli) should validate passwords
against a certain scheme.
Note that there is need_secrets() which on the contrary must check for
valid passwords.
Error scenario:
Connect to a WEP Wi-Fi, via `nmcli device wifi connect SSID`. The
generated connection has wep-key-type=0 (UNKNOWN) and wep-key-flags=0.
When trying to connect, NM will ask for secrets and set the wep-key0
field. After that, verification can fail (e.g. if the password is longer
then 64 chars).
Libraries need to include <gi18n-lib.h>, not <gi18n.h>, so that _()
will get defined to "dgettext (GETTEXT_DOMAIN, string)" rather than
"gettext (string)" (which will use the program's default domain, which
works fine for programs in the NetworkManager tree, but not for
external users). Likewise, we need to call bindtextdomain() so that
gettext can find the translations if the library is installed in a
different prefix from the program using it (and
bind_textdomain_codeset(), so it will know the translations are in
UTF-8 even if the locale isn't).
(The fact that no one noticed this was broken before is because the
libraries didn't really start returning useful translated strings much
until 0.9.10, and none of the out-of-tree clients have been updated to
actually show those strings to users yet.)
config.h should be included from every .c file, and it should be
included before any other include. Fix that.
(As a side effect of how I did this, this also changes us to
consistently use "config.h" rather than <config.h>. To the extent that
it matters [which is not much], quotes are more correct anyway, since
we're talking about a file in our own build tree, not a system
include.)
nm_setting_verify() took a GSList of other NMSettings, but really it
would just be simpler all around to pass the NMConnection instead...
This means that several formerly NMSetting-branded functions that
operated on lists-of-settings now get replaced with
NMConnection-branded functions instead.
Each setting type was defining its own error type, but most of them
had exactly the same three errors ("unknown", "missing property", and
"invalid property"), and none of the other values was of much use
programmatically anyway.
So, this commit merges NMSettingError, NMSettingAdslError, etc, all
into NMConnectionError. (The reason for merging into NMConnectionError
rather than NMSettingError is that we also already have
"NMSettingsError", for errors related to the settings service, so
"NMConnectionError" is a less-confusable name for settings/connection
errors than "NMSettingError".)
Also, make sure that all of the affected error messages are localized,
and (where appropriate) prefix them with the relevant property name.
Renamed error codes:
NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND
NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET
Remapped error codes:
NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING
NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY
Dropped error codes (were previously defined but unused):
NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED
NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED
NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING
NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING
NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
Make enum- and flags-valued properties use GParamSpecEnum and
GParamSpecFlags, for better introspectability/bindability.
This requires no changes outside libnm-core/libnm since the expected
data size is still the same with g_object_get()/g_object_set(), and
GLib will internally convert between int/uint and enum/flags GValues
when using g_object_get_property()/g_object_set_property().
Simplify the use of _nm_register_setting() by having it splice
together various symbol names itself rather than requiring them to be
specified explicitly, and extend it to also ensure that the type's
corresponding error type is registered (allowing one to find it via
g_type_from_name() if necessary).
Add NetworkManager.h, which includes all of the other NM header, and
require all external users of libnm to use that rather than the
individual headers.
(An exception is made for nm-dbus-interface.h,
nm-vpn-dbus-interface.h, and nm-version.h, which can be included
separately.)
This commit begins creating the new "libnm", which will replace
libnm-util and libnm-glib.
The main reason for the libnm-util/libnm-glib split is that the daemon
needs to link to libnm-util (to get NMSettings, NMConnection, etc),
but can't link to libnm-glib (because it uses many of the same type
names as the NetworkManager daemon. eg, NMDevice). So the daemon links
to only libnm-util, but basically all clients link to both.
With libnm, there will be only a single client-visible library, and
NetworkManager will internally link against a private "libnm-core"
containing the parts that used to be in libnm-util.
(The "libnm-core" parts still need to be in their own directory so
that the daemon can see those header files without also seeing the
ones in libnm/ that conflict with its own headers.)
[This commit just copies the source code from libnm-util/ to
libnm-core/, and libnm-glib/ to libnm/:
mkdir -p libnm-core/tests/
mkdir -p libnm/tests/
cp libnm-util/*.[ch] libnm-util/nm-version.h.in libnm-core/
rm -f libnm-core/nm-version.h libnm-core/nm-setting-template.[ch] libnm-core/nm-utils-enum-types.[ch]
cp libnm-util/tests/*.[ch] libnm-core/tests/
cp libnm-glib/*.[ch] libnm/
rm -f libnm/libnm_glib.[ch] libnm/libnm-glib-test.c libnm/nm-glib-enum-types.[ch]
cp libnm-glib/tests/*.[ch] libnm/tests/
]
