* panel-applet/NMWirelessAppletDbus.c
- Pull fresh devices and networks from NM when wireless networks
change. Provides faster feedback of a forced wireless network
* src/NetworkManagerDbus.c
- Return error when "getMaxQuality" is called on a wired device
- Make best_ap freezing actually work again, and signal cancellation
of activation if there's already a device activation when the user
freezes the best_ap
* src/NetworkManagerDevice.c
- Don't clear out the best_ap for wireless devices when the link goes
down, that's done elsewhere
- Kill any dhcp daemons when cancelling device activation since they
may be stuck waiting for a DHCP address, and since we're cancelling
activation we don't care about that anymore
* src/NetworkManagerPolicy.c
- Make sure to unref the device we ref earlier (we refed it to make sure
it stuck around during device activation and such)
- If we were going to change the best device, but its activating currently
(and therefore the change didn't occur due to the check earlier)
we mark the state changed to we come back to it later when device
activation has canceled and its no longer activating
* src/backends/NetworkManagerRedHat.c
- SIGKILL dhcp daemons rather than SIGTERM-ing them
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@143 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* examples/python/systray/network_tray.py
(network_tray.sort_networks):
Added support for having wireless always scanning
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@141 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
NOTE: this commit changes the behavior of wireless devices in
NetworkManager. They are now up all the time, scanning all
the time. Only the active device has an IP address and routing
information set up however. Also, NetworkManager will no longer
opportunistically switch wireless networks when a better one
comes in range, it will remain associated with one wireless network
until that one drops out.
* panel-applet/NMWirelessApplet.c
panel-applet/NMWirelessAppletDbus.c
- List all wireless cards and their respective networks
* src/NMLoadModules
- Use full path to /sbin/ip
* src/NetworkManager.c
- Keep wireless devices up all the time so they can scan
* src/NetworkManagerDbus.c
- On a WirelessNetworkUpdate signal from NMI, don't update
the "best" AP
* src/NetworkManagerDevice.c
- (nm_device_set_link_active): clear out the best ap for
wireless devices when the link is set to FALSE
- Scan on all wireless cards, all the time
- (nm_device_activation_worker): split out the wireless card
link-waiting code to a separate function
- Keep wireless cards up even if device activation fails
- Don't update the "best" ap as much
* src/NetworkManagerPolicy.c
- Don't update the best ap when checking if its frozen,
let link checking clear out a frozen best ap for us
* src/NetworkManagerWireless.c
- Scan on all wireless cards, all the time
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@140 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* examples/python/NetworkManager.py:
added CONNECTED, CONNECTING, and DISCONNECTED states
added methods to return number of devices of a single type
* examples/python/systray/network_tray.py:
did some tweaks to get the menu looking near what it is supposed
to look like. Also did a Airo card hack to make it show the
correct AP quality
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@134 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/no-networkmanager.png
panel-applet/Makefile.am
panel-applet/NMWirelessApplet.c
- Add a "NetworkManager not running" icon and use it
- Use new consolidated GConf keys rather than Preferred/Trusted
* TODO: update
* info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfoDbus.[ch]
info-daemon/NetworkManagerInfoPassphraseDialog.c
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
- Add a "getNetworkTrusted" dbus method
- "WirelessNetworkUpdate" signal now sent rather than
"PreferredNetworkUpdate/TrustedNetworkUpdate" signals
- Start freeing some dbus errors (not completed yet)
* info-daemon/passphrase.glade
- Remove the "don't show" hints for pager and taskbar
- Add a title since its going to be in the taskbar
* src/NetworkManager.[ch]
src/NetworkManagerAPList.[ch]
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
* src/NetworkManagerAP.[ch]
- Add get/set "trusted" accessors and data bit
* src/NetworkManagerDbus.[ch]
- Add function to get "trusted" status of a network from NetworkManagerInfo
- Trap new WirelessNetworkUpdate signal rather than old separate signals
* src/NetworkManagerDevice.[ch]
- Add per-device config data (ip4 addr, gateway, netmask) and accessors
- (nm_device_new): Get device config from backend when initializing devices
- (nm_device_activation_worker): Split out device configuration on
activation to deal with static/dynamic IP differences, and try encryption
fallbacks on a device if the encryption method for the best AP is not good
- (nm_device_update_best_ap): convert to new consolidated access point lists from
NetworkManagerInfo, and copy over latest NMI info to best_ap when setting it
* src/NetworkManagerWireless.c
- libgcrypt code wasn't converting the MD5 digest to an ascii string, fix it
* src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSystem.h
- (nm_system_device_update_config_info): Add function to get device configuration
from system data in ifcfg-* files
* src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerSlackware.c
- Add stub functions for getting device configuration
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@131 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patches below from:
<j@bootlab.org>
Mark Roach <mrroach@okmaybe.com>
Thom May <thom@debian.org>
* configure.in
initscript/Debian/NetworkManager
initscript/Debian/Makefile.am
- Initscript for Debian
* src/backends/NetworkManagerDebian.c
- Add missing system init function to allow compilation
on Debian
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@125 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Remove 'debug' extern global from all files since we now
use syslog()
* src/NetworkManager.[ch]
- Break out routine that get the net.interface property from HAL,
removing that logic from nm_create_device_and_add_to_list()
- (nm_create_device_and_add_to_list): make this a bit more general so
it doesn't do the talking to HAL. Also add arguments to facilitate
the create of test devices.
- (nm_data_mark_state_changed): rename from nm_data_set_state_modified()
- (nm_data_new, main, nm_print_usage): add new argument "--enable-test-devices"
which makes NetworkManager listen for dbus commands to create test
devices, which have no backing hardware. Use when you're on a plane
for example, and/or forgot your wireless card at home. Test devices
_cannot_ be created unless NM is started with --enable-test-devices.
* src/NetworkManagerDbus.[ch]
- New "getLinkActive" method for devices
- New "setLinkActive" method for devices (only works on test devices)
- New "createTestDevice" method on NetworkManager object to create a test
device of a specified type (ie wired, wireless). UDI is created from
scratch, as is the interface name. Only works when NM is started with
--enable-test-devices switch.
- New "removeTestDevice" method on NetworkManager object which removes a
test device. Only works when NM is started with --enable-test-devices
* src/NetworkManagerDevice.[ch]
- Logic to facilitate test devices. Add variables to NMDevice struct to indicate
whether a device is a test device or not, and what its link status is.
- Deal with test devices in most functions. For those that work directly on hardware
special-case test devices.
- (nm_device_new): don't create a test device if test devices weren't enabled on the
command-line.
- (nm_device_update_link_active): split out logic for wired and wireless device link
checking to separate functions to facilitate test device link checking.
- (nm_device_set_enc_key): Since some drivers for wireless cards are daft and
don't make a distinction between System Authentication and Encryption
(namely Cisco aironet), we use Open System auth when setting a WEP key
on the card. We don't deal with Shared Key auth yet.
- (nm_device_activation_worker): split the activation cancel check logic out into
a separate routine nm_device_activation_cancel_if_needed()
- (nm_device_activation_signal_cancel): rename from nm_device_activation_cancel()
- (nm_device_fake_ap_list): Test wireless devices obviously cannot scan, so create
a list of fake access points that they can "see"
- (nm_device_is_test_device): return whether or not a device is a test device
* src/NetworkManagerPolicy.c
- (nm_policy_get_best_device): attempt to deal with wireless network selection,
previously if you "locked"/forced NM to use a wireless device but then
selected a wireless network for NM to use, it would switch to a wired device.
So, if the active device is wireless and it has a "forced" best AP, use it
if the "forced" best AP is still valid
- (nm_state_modification_monitor): deal with NULL best devices, for example
there were no usable network devices, or the last one was removed
* src/backends/NetworkManager*.c
- Deal with test devices, mostly just return success for operations like getting
a DHCP address
* test/nmtestdevices.c
- Test tool to create/remove/link-switch test devices
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@112 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* examples/python/NetworkManager.py:
added convience functions has_wired_device and has_wireless_device
* examples/python/systray/network_tray.py:
cleaned up a bunch of cruft, added support for listing wireless
networks just like the real applet. This is probably all I'm
going to work on this applet from now on.
TODO: add support for actually changing networks and devices
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@111 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* examples/python/NetworkManager.py (NetworkManager.get_device):
changed "nm.networks" into a dict from a list so I can store all
the cool information about networks in there
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@109 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* examples/python/NetworkManager.py:
Bug fixes to the code so we get all the device information
that we need in get_device()
* examples/python/NMTester.py:
Fixed _print_device_list to print_device_list
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@107 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDbus.c (nm_dbus_get_network_timestamp): Return
a GTimeVal instead of time_t. This is easier to work with,
since time_t may be a long or double, we don't know.
* src/NetworkManagerDbus.h: Update prototype.
* src/NetworkManagerAP.c (struct NMAccessPoint): Store a GTimeVal
instead of time_t.
(nm_ap_get_timestamp): Update to return GTimeVal.
(nm_ap_set_timestamp): Update to take GTimeVal.
* src/NetworkManagerDevice.c (nm_device_update_best_ap): Update
to handle GTimeVal.
* src/NetworkManagerAPList.c (nm_ap_list_update_network): Handle
GTimeVal change.
(nm_ap_list_print_members): Fix warnings in printf format.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@104 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDbus.c (nm_dbus_get_network_timestamp): Return
a GTimeVal instead of time_t. This is easier to work with,
since time_t may be a long or double, we don't know.
* src/NetworkManagerDbus.h: Update prototype.
* src/NetworkManagerAP.c (struct NMAccessPoint): Store a GTimeVal
instead of time_t.
(nm_ap_get_timestamp): Update to return GTimeVal.
(nm_ap_set_timestamp): Update to take GTimeVal.
* src/NetworkManagerAPList.c (nm_ap_list_update_network): Handle
GTimeVal change.
(nm_ap_list_print_members): Fix warnings in printf format.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@103 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in: Generate config.h.
* configure.in: Dump dependency on OpenSSL; we can't
use it since this package is GPL:
http://www.gnome.org/~markmc/openssl-and-the-gpl.html
Instead, check for libgcrypt, use it if available,
otherwise use included MD5 code.
* src/gnome-keyring-md5.h, src/gnome-keyring-md5.c:
Suck in from gnome-keyring, munge a bit.
* src/Makefile.am (NetworkManager_SOURCES) <!WITH_GCRYPT>: Include
gnome-keyring-md5.h gnome-keyring-md5.c.
(NetworkManager_LDADD) <WITH_GCRYPT>: Add dep on LIBGCRYPT_LIBS.
* src/NetworkManagerWireless.c (nm_md5): New function, uses
libgcrypt or included gnome-keyring md5 bits.
(nm_wireless_128bit_key_from_passphrase): Use nm_md5.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@101 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
