This is a pure rename of the respective Go functions/methods
with corresponding adjustments to error messages and tests.
A couple of comments were manually rephrased.
With this change, the implementation and error messages match
the latest spec.
No functionality change.
Change-Id: Iaa92a08b64756356fb2c5abdaca5c943c9105c96
Reviewed-on: https://go-review.googlesource.com/c/go/+/384618
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Change run.go to apply the GO_TEST_TIMEOUT_SCALE scaling factor to
test timeouts (mentioned in "-t" clause in test header).
Also with this patch, bump up the timeout for fixedbugs/issue46234.go
from 30 to 45 seconds, to avoid flakes on very slow builders.
Updates #50973.
Change-Id: Icbafa482860e24cc1e72fee53511bcc764d06bf1
Reviewed-on: https://go-review.googlesource.com/c/go/+/382774
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Refactor Checker.comparison such that its logic is easier to reason
about and so that special cases can be handled more directly.
Use the appropriate operand (of 1st or 2nd operand) for error
reporting (position and type), rather than always using the
first operand.
Use an extra parameter to indicate a switch case
comparison; in this case the error is always reported at
the position of the first operand. (The error messages are
not yet adjusted for switches; see next CL.)
Introduce a new kindString function which is used to print simplified
types in error messages (related to comparisons only): instead of
printing the details of a struct type, we just print "struct" where
the details are not relevant. This matches the 1.17 compiler behavior.
Added a "reportf" parameter to the internal comparable function so we
can report an error cause in addition to the boolean result. Rather
than passing a *string for cause, we pass a function to record the
cause so that we can use the *Checker context for printing (needed
for proper type qualification). This mechanism reports the same
details now as the 1.17 compiler.
Adjusted various tests as needed added new test files.
Fixes#50918.
Change-Id: I1f0e7af22f09db4d31679c667c71a9038a8dc9d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/381964
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
It has moved to golang.org/x/exp/constraints. Perhaps it will move
back to the standard library in a future release.
For golang/go#45458Fixesgolang/go#50792
Change-Id: I93aa251a7afe7b329a3d3faadc0c5d6388b1f0e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/382460
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This makes the error case pointed out in the issue like the current
message in Go 1.17 or -G=0 mode. The priority is to point out the
similar but wrong method name, rather than a difference in type.
Made changes to both cmd/compile/internal/types2 and go/types.
Added in a missing tab in an error message in go/types.
At the same time, removed the extra "at info" on the have lines (and
pointer receiver lines) of error messages, as requested in #50907.
Fixes#50816Fixes#50907
Change-Id: I04f8151955bdb6192246cbcb59adc1c4b8a2c4e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/381774
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
We can type-check these fine but the API implications are unclear.
Fixes#50912.
For #50937.
Change-Id: If29bbb4a257ff6a85e3bfcd4755fd8f90c80fb87
Reviewed-on: https://go-review.googlesource.com/c/go/+/382116
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
- Use the correct predicate in Checker.implements: for interfaces
we cannot use the API Comparable because it always returns true
for all non-type parameter interface types: Comparable simply
answers if == and != is permitted, and it's always been permitted
for interfaces. Instead we must use Interface.IsComparable which
looks at the type set of an interface.
- When comparing interfaces for identity, we must also consider the
whether the type sets have the comparable bit set.
With this change, `any` doesn't implement `comparable` anymore. This
only matters for generic functions and types, and the API functions.
It does mean that for now (until we allow type-constrained interfaces
for general non-constraint use, at some point in the future) a type
parameter that needs to be comparable cannot be instantiated with an
interface anymore.
For #50646.
Change-Id: I7e7f711bdcf94461f330c90509211ec0c2cf3633
Reviewed-on: https://go-review.googlesource.com/c/go/+/381254
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
For a composite literal expression like []T{{f: 1}}, we allow T to be
a pointer to struct type, so it's consistent to allow T to also be a
type parameter whose structural type is a pointer to struct type.
Fixes#50833.
Change-Id: Ib0781ec4a4f327c875ea25b97740ff2c0c86b916
Reviewed-on: https://go-review.googlesource.com/c/go/+/381075
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
These can go wrong when one of the operands is the minimum integer value.
Fixes#50854.
Change-Id: I238fe284f60c7ee5aeb9dc9a18e8b1578cdb77d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/381318
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Add a missing shape check in (*Tsubster).tinter when substituting on a
generic type which is an empty interface, analogous to same check in
(*Tsubster).tstruct. Empty structs/interfaces that have rparams (i.e.
are a generic type or a shape type) need to get a new type of their
rparams - they will be different even though they don't have any
fields/methods. Without this shape check, we were not correctly
completing the Token[int] type during substitution in the example in the
issue. This issue only happens for a generic type which is an empty
interface (i.e. doesn't actually use the type param, hence quite unusual).
Added the test case already created by Keith.
Fixes#50841
Change-Id: Ia985b9f52c0e87ed0647b46373e44c51cb748ba4
Reviewed-on: https://go-review.googlesource.com/c/go/+/381175
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL updates unified IR to look at the structural type of a
composite literal type, rather than merely the underlying type, to
determine if it's a structure. This fixes a number of currently
failing regress test cases.
Updates #50833.
Change-Id: I11c040c77ec86c23e8ffefcf1ce1aed548687dc5
Reviewed-on: https://go-review.googlesource.com/c/go/+/381074
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
For #50646.
Change-Id: I7420545556e0df2659836364a62ce2c32ad7a8b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/380654
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
We have disallowed having a typeparam on the right-hand-side of a type
declaration. So, we disabled much of the test absdiff.go. I recently
wrote a new test absdiff2.go to use a structure containing the type
param type, so I could attach a method properly and run the full test.
As a contrast, I thought I would create absdiff3.go, where the Abs
functionality is passed in as a function callback (but derived from a
generic function). This is simpler, and more inline with some of the
guidelines that Ian has been proposing (use passed-in functions rather
than requiring methods, when possible, for greater ease-of-use).
Only adds a new test absdiff3.go. (And fixes a comment in absdiff2.go.)
Change-Id: I6dd185b50a3baeec31f689a892319963468a7201
Reviewed-on: https://go-review.googlesource.com/c/go/+/380774
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Added a new absdiff2.go test case, which works fully without using a
typeparam on the right-hand-side of a type declaration (which is
disallowed). Fixed an issue that the test revealed, which is that we
need to set g.curDecl properly for the "later" functions which are
deferred until after all declarations are initially processed. Also,
g.curDecl may be non-nil in typeDecl for local type declaration. So, we
adjust the associate assertion, and save/restore g.curDecl
appropriately.
Fixes#50790
Change-Id: Ieed76a7ad0a83bccb99cbad4bf98a7bfafbcbbd3
Reviewed-on: https://go-review.googlesource.com/c/go/+/380594
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
By processing non-alias type declarations before alias type declaration,
and those before everything else we can avoid some of the remaining
errors which are due to alias types not being available.
For #25838.
For #50259.
For #50276.
For #50729.
Change-Id: I233da2899a6d4954c239638624dfa8c08662e6b9
Reviewed-on: https://go-review.googlesource.com/c/go/+/380056
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The type checker doesn't have a general mechanism to "use" the type
of a type alias whose type depends on a recursive type declaration
which is not yet completely type-checked. In some cases, the type of
a type alias is needed before it is determined; the type is incorrect
(invalid) in that case but no error is reported. The type-checker is
happy with this (incorrect type), but the compiler may crash under
some circumstances.
A correct fix will likely require some form of forwarding type which
is a fairly pervasive change and may also affect the type checker API.
This CL introduces a simple side table, a map of broken type aliases,
which is consulted before the type associated with a type alias is
used. If the type alias is broken, an error is reported.
This is a stop-gap solution that prevents the compiler from crashing.
The reported error refers to the corresponding issue which suggests
a work-around that may be applicable in some cases.
Also fix a minor error related to type cycles: If we have a cycle
that doesn't start with a type, don't use a compiler error message
that explicitly mentions "type".
Fixes#50259.
Fixes#50276.
Fixes#50779.
For #50729.
Change-Id: Ie8e38f49ef724e742e8e78625e6d4f3d4014a52c
Reviewed-on: https://go-review.googlesource.com/c/go/+/379916
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In validType, when we see an instantiated type, proceed as with
non-generic types but provide an environment in which to look up
the values (the corresponding type arguments) of type parameters
of the instantiated type. For each type parameter for which there
is a type argument, proceed with validating that type argument.
This corresponds to applying validType to the instantiated type
without actually instantiating the type (and running into infinite
instantiations in case of invalid recursive types).
Also, when creating a type instance, use the correct source position
for the instance (the start of the qualified identifier if we have an
imported type).
Fixes#48962.
Change-Id: I196c78bf066e4a56284d53368b2eb71bd8d8a780
Reviewed-on: https://go-review.googlesource.com/c/go/+/379414
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Given we have support for field access to type params with a single
structural type, we need to distinguish between methods calls and field
access when we have an OXDOT node on an expression which is a typeparam
(or correspondingly a shape). We were missing checks in getInstInfo,
which figures out the dictionary format, which then caused problems when
we generate the dictionaries. We don't need/want dictionary entries for
field access, only for bound method calls. Added a new function
isBoundMethod() to distinguish OXDOT nodes which are bound calls vs.
field accesses on a shape.
Removed isShapeDeref() - we can't have field access or method call on a
pointer to variable of type param type.
Fixes#50690
Change-Id: Id692f65e6f427f28cd2cfe474dd30e53c71877a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/379674
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
In a method declaration "func (f *Foo[_, _]) String() string { ... }",
the two blank typeparams have the same name, but our current design with
types1 needs unique names for type params. Similarly, for export/import,
we need unique names to keep the type params straight in generic types
and connect the proper type param with the proper constraint. We make
blank type params unique by changing them to $1, $2, etc in noder.typ0()
via typecheck.TparamExportName(). We then revert $<num> back to _ during
type2 import via typecheck.TparamName(). We similarly revert
during gcimporter import. We don't need/want to revert in the types1
importer, since we want unique names for type params.
Rob Findley has made a similar change to x/tools (and we tried to make
the source code changes similar for the gcimporter and types2 importer
changes).
Fixes#50419
Change-Id: I855cc3d90d06bcf59541ed0c879e9a0e4ede45bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/379194
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Most CONVIFACEs are created in the transform phase (or old typechecker,
in -G=0 mode). But if the main result of a multi-value assignment (map,
channel, or dot-type) must be converted to an interface during the
assignment, that CONVIFACE is not created until (*orderState).as2ok in
the order phase (because the AS2* ops and their sub-ops are so tightly
intertwined). But we need to create the CONVIFACE during the
stenciling/transform phase to enable dictionary lookups. So, in
transformAssign(), if we are doing a special multi-value assignment
involving a type-param-derived type, assign the results first to temps,
so that we can manifest the CONVIFACE during the transform in assigning
the first temp to lhs[0].
Added a test for both AS2RECV (channel receives) and AS2MAPR (maps). I
don't think we can have a type assertion on a type-param-derived type.
Fixes#50642
Change-Id: I4d079fc46c93d8494d7db4ea8234d91522edb02a
Reviewed-on: https://go-review.googlesource.com/c/go/+/379054
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Slightly better for cases such as string(1 << s).
Leaves type-checker tests alone for now because
there are multiple dozens.
For #45117.
Change-Id: I47b314c713fabe424c2158674bf965416a8a6f5c
Reviewed-on: https://go-review.googlesource.com/c/go/+/379274
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
For an extension operation like MOWWreg, if the operand is already
extended, we optimize the second extension out. Usually a LoadReg
of a proper type would come already extended, as a MOVW/MOVWU etc.
instruction does. But for a LoadReg to a floating point register,
the instruction does not do the extension. So we cannot elide the
extension.
Fixes#50671.
Change-Id: Id8991df78d5acdecd3fd6138c558428cbd5f6ba3
Reviewed-on: https://go-review.googlesource.com/c/go/+/379236
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Currently the code handles the case of returning values from
a function with no result parameters as a special case.
Consider this input:
package p
func f0_2() { return 1, 2 }
func f0_1() { return 1 }
func f1_0() int { return }
func f1_2() int { return 1, 2 }
func f2_0() (int, int) { return }
func f2_1() (int, int) { return 1 }
The errors are:
x.go:3:33: no result values expected <<<
x.go:4:33: no result values expected <<<
x.go:5:26: not enough return values
have ()
want (int)
x.go:6:36: too many return values
have (number, number)
want (int)
x.go:7:26: not enough return values
have ()
want (int, int)
x.go:8:33: not enough return values
have (number)
want (int, int)
There are two problems with the current special case emitting the
errors on the marked line:
1. It calls them 'result values' instead of 'return values'.
2. It doesn't show the type being returned, which can be useful to programmers.
Using the general case solves both these problems,
so this CL removes the special case and calls the general case instead.
Now those two errors read:
x.go:3:33: too many return values
have (number, number)
want ()
x.go:4:33: too many return values
have (number)
want ()
Fixes#50653.
Change-Id: If6b47dcece14ed4febb3a2d3d78270d5be1cb24d
Reviewed-on: https://go-review.googlesource.com/c/go/+/379116
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
In the compiler, we need to distinguish field and method access on a
type param. For field access, we avoid the dictionary access (to create
an interface bound) and just do the normal transformDot() (which will
create the field access on the shape type).
This field access works fine for non-pointer types, since the shape type
preserves the underlying type of all types in the shape. But we
generally merge all pointer types into a single shape, which means the
field will not be accessible via the shape type. So, we need to change
Shapify() so that a type which is a pointer type is mapped to its
underlying type, rather than being merged with other pointers.
Because we don't want to change the export format at this point in the
release, we need to compute StructuralType() directly in types1, rather
than relying on types2. That implementation is in types/type.go, along
with the helper specificTypes().
I enabled the compiler-related tests in issue50417.go, added an extra
test for unnamed pointer types, and added a bunch more tests for
interesting cases involving StructuralType(). I added a test
issue50417b.go similar to the original example, but also tests access to
an embedded field.
I also added a unit test in
cmd/compile/internal/types/structuraltype_test.go that tests a bunch of
unusual cases directly (some of which have no structural type).
Updates #50417
Change-Id: I77c55cbad98a2b95efbd4a02a026c07dfbb46caa
Reviewed-on: https://go-review.googlesource.com/c/go/+/376194
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
When we export a shape instantiation, because a particular
fully-instantiated type is needed by an inlineable function, we possibly
export the body of the instantiation, if it is inlineable. In this case,
we should have been calling ImportedBody() to make sure that the
function body had already been read in (if it is actually imported from
another package).
Fixes#50598
Change-Id: I512d2bcc745faa6ff3a97e25bc8f46e2c2643d23
Reviewed-on: https://go-review.googlesource.com/c/go/+/378494
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
In order to make sure we export the dictionaries/shape methods for all
fully-instantiated types in inlineable functions, we need to descend
fully into types. For example, we may have a map type (e.g.
map[transactionID]Promise[*ByteBuffer]), where the key or value is a new
fully-instantiated type. So, I add a new checkFullyInst() traversal
function, which traverses all encountered types, but maintains a map, so
it only traverse it type once. We need to descend fully into interfaces,
structs, and methods, since a fully-instantiated type make occur in any
fields or arguments/results of methods, etc.
Fixes#50561
Change-Id: I88681a30384168539ed7229eed709f4e73ff0666
Reviewed-on: https://go-review.googlesource.com/c/go/+/378154
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Using type aliases, it's possible to create structs with embedded
fields that have no corresponding type literal notation. However, we
still need to generate a unique name for these types to use for linker
symbols. This CL introduces a new "struct{ Name = Type }" syntax for
use in LinkString formatting to represent these types.
Reattempt at CL 372914, which was rolled back due to race-y
LocalPkg.Lookup call that isn't safe for concurrency.
Fixes#50190.
Change-Id: I0b7fd81e1b0b3199a6afcffde96ade42495ad8d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/378434
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
With this change, we shall now see:
*myS does not implement S (wrong type for DoSomething method)
have DoSomething() (string, error) at ./main.go:9:14
want DoSomething() (int, error)
instead of previously:
*myS does not implement S (wrong type for DoSomething method)
have DoSomething() (string, error)
want DoSomething() (int, error)
Fixes#42841Fixes#45813
Change-Id: I66990929e39b0d36f2e91da0d92f60586a9b84e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/373634
Trust: Robert Findley <rfindley@google.com>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The names given to methods of types created during type substitution
were possible incorrect when the type parameters themselves were nested
types.
Fixes#50485
Change-Id: I7e0043ed22c26406a5f9d8d51d9e928770a678f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/377494
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The loading of the base type in typ0() may cause s.Def to be defined for
the instantiated type, so load the base type before checking s.Def.
Fixes#50486
Change-Id: Ic039bc8f774dda534f4ccd1f920220b7a10dede6
Reviewed-on: https://go-review.googlesource.com/c/go/+/377094
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Issue #50552 is due to a problem with my recent improvement in the
interaction between generics and inlining. In markInlBody(), we now mark
dictionaries and shape methods for export, so they will be available for
any package that inlines the current inlineable function. But we need to
make sure that the dictionary and method symbols have actually been
resolved into Nodes (looked up in the import data), if they are not
already defined, so we can then mark them for export.
Improved header comment on Resolve().
Fixes#50552
Change-Id: I89e52d39d3b9894591d2ad6eb3a8ed3bb5f1e0a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/377714
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
For some reason, aix sometimes executes the bogus function body. This
should never happen as it lives in a no-execute section. It might be
a transient permission blip as the heap grows.
Add a small function to cleanup and synchronize the icache before
jumping to the bogus function to ensure it causes a panic, not SIGILL.
Fixes#44583
Change-Id: Iadca62d82bfb70fc62088705dac42a880a1208fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/377314
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
I made the default be that, where there are differences between types2
and -G=0 error messages, we want errorcheck tests to pass types2.
Typically, we can get errorcheck to pass on types2 and -G=0 if they give
the same number of error messages on the same lines, just different
wording. If they give a different number of error messages, then I made
types2 pass. I added an exception list for -G=0 to cover those cases
where -G=0 and types give different numbers of error messages.
Because types2 does not run if there are syntax errors, for several
tests, I had to split the tests into two parts in order to get all the
indicated errors to be reported in types2 (bug228.go, bug388.go,
issue11610.go, issue14520.go)
I tried to preserve the GCCGO labeling correctly (but may have gotten
some wrong). When types2 now matches where a GCCGO error previously
occurred, I transformed GCCGO_ERROR -> ERROR. When types2 no longer
reports an error in a certain place, I transformed ERROR -> GCCGO_ERROR.
When types2 reports an error in a new place, I used GC_ERROR.
The remaining entries in types2Failures are things that I think we
probably still need to fix - either actually missing errors in types2,
or cases where types2 gives worse errors than -G=0.
Change-Id: I7f01e82b322b16094096b67d7ed2bb39b410c34f
Reviewed-on: https://go-review.googlesource.com/c/go/+/372854
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- detect *interface case and report specific error
- replaced switch with sequence of if's for more clarity
- fixed isInterfacePtr: it applies to all interfaces, incl.
type parameters
- reviewed/fixed all uses of isInterfacePtr
- adjusted error messages to be consistently of the format
"type %s is pointer to interface, not interface"
Fixes#48312.
Change-Id: Ic3c8cfcf93ad57ecdb60f6a727cce9e1aa4afb5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/376914
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Added a test to make sure that the private methods of a local generic
type are properly exported, if there is a global variable with that
type.
Added comments in crawler.go, to give more detail and to give more about
the overall purpose.
Fixed one place where t.isFullyInstantiated() should be replaced by
isPtrFullyInstantiated(t), so that we catch pointers to generic types
that may be used as a method receiver.
Change-Id: I9c42d14eb6ebe14d249df7c8fa39e889f7cd3f22
Reviewed-on: https://go-review.googlesource.com/c/go/+/374754
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Using type aliases, it's possible to create structs with embedded
fields that have no corresponding type literal notation. However, we
still need to generate a unique name for these types to use for linker
symbols. This CL introduces a new "struct{ Name = Type }" syntax for
use in LinkString formatting to represent these types.
Fixes#50190.
Change-Id: I025ceb09a86e00b7583d3b9885d612f5d6cb44fe
Reviewed-on: https://go-review.googlesource.com/c/go/+/372914
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Finally figured out how to deal with the interaction between generics
and inlining. The problem has been: what to do if you inline a function
that uses a new instantiated type that hasn't been seen in the current
package? This might mean that you need to do another round of
function/method instantiatiations after inlining, which might lead to
more inlining, etc. (which is what we currently do, but it's not clear
when you can stop the inlining/instantiation loop).
We had thought that one solution was to export instantiated types (even
if not marked as exportable) if they are referenced in exported
inlineable functions. But that was quite complex and required changing
the export format. But I realized that we really only need to make sure
the relevant dictionaries and shape instantiations for the instantiated
types are exported, not the instantiated type itself and its wrappers.
The instantiated type is naturally created as needed, and the wrappers
are generated automatically while writing out run-time type (making use
of the exported dictionaries and shape instantiations).
So, we just have to make sure that those dictionaries and shape
instantiations are exported, and then they will be available without any
extra round of instantiations after inlining. We now do this in
crawler.go. This is especially needed when the instantiated type is only
put in an interface, so relevant dictionaries/shape instantiations are
not directly referenced and therefore exported, but are still needed for
the itab.
This fix avoids the phase ordering problem where we might have to keep
creating new type instantiations and instantiated methods after each
round of inlining we do.
Removed the extra round of instantiation/inlining that were added in the
previous fix. The existing tests
test/typeparam{geninline.go,structinit.go} already test this situation
of inlining a function referencing a new instantiated type.
Added the original example from issue 50121 as test (has 5 packages),
since it found a problem with this code that the current simpler test
for 50121 did not find.
Change-Id: Iac5d0dddf4be19376f6de36ee20a83f0d8f213b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/375494
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Similarly to what we do for the built-in function `copy`,
where we allow a string as 2nd argument to append, also
permit a type parameter constrained by string|[]byte.
While at it, change date in the manual.go2 test files so
that we don't need to constantly correct it when copying
a test case from that file into a proper test file.
Fixes#50281.
Change-Id: I23fed66736aa07bb3c481fe97313e828425ac448
Reviewed-on: https://go-review.googlesource.com/c/go/+/376214
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
types2 allows the conversion of a slice of a user-defined byte type B
(not builtin uint8 or byte) to string. But runtime.slicebytetostring
requires a []byte argument, so add in a CONVNOP from []B to []byte if
needed. Same for the conversion of a slice of user-defined rune types to
string.
I made the same change in the transformations of the old typechecker, so
as to keep tcConv() and transformConv() in sync. That fixes the bug for
-G=0 mode as well.
Fixes#23536
Change-Id: Ic79364427f27489187f3f8015bdfbf0769a70d69
Reviewed-on: https://go-review.googlesource.com/c/go/+/376056
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 352870 added extra phase for instantiation after inlining, to take
care of the new fully-instantiated types. However, when fetching inlined
body of these types's methods, we need to allow OADDR operations on
untyped expressions, the same as what main inlining phase does.
The problem does not show up, until CL 371554, which made the compiler
do not re-typecheck while importing, thus leaving a OXDOT node to be
marked as address taken when it's not safe to do that.
Fixes#50437
Change-Id: I20076b872182c520075a4f8b84230f5bcb05b341
Reviewed-on: https://go-review.googlesource.com/c/go/+/375574
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
For #50317.
Change-Id: I24ccf333c380283a36b573ef8fc3e7fcd71bd17f
Reviewed-on: https://go-review.googlesource.com/c/go/+/376215
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Work-around for #50481: report an error for multiple
blank type parameters. It's always possible to use
non-blank names in those cases.
We expect to lift this restriction for 1.19.
For #50481.
Change-Id: Ifdd2d91340aac1da3387f7d80d46e44f5997c2a8
Reviewed-on: https://go-review.googlesource.com/c/go/+/376058
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Move switch to enable method type parameters entirely
to the parser, by adding the mode AllowMethodTypeParams.
Ensure that the error messages are consistent.
Remove unnecessary code in the type checker.
Fixes#50317.
Change-Id: I4f3958722400bdb919efa4c494b85cf62f4002bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/376054
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This change implements field the access p.f where the type of p
is a type parameter with a structural constraint that is a struct
with a field f. This is only the fix for the type checker. The
compiler will need a separate CL.
This makes the behavior consistent with the fact that we can
write struct composite literals for type parameters with a
struct structural type.
For #50417.
For #50233.
Change-Id: I87d07e016f97cbf19c45cde19165eae3ec0bad2b
Reviewed-on: https://go-review.googlesource.com/c/go/+/375795
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
For #50439
Change-Id: Ifad6e6f8de42121c695b5a4dc56e0f6606e2917e
Reviewed-on: https://go-review.googlesource.com/c/go/+/375796
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Trust: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
In the dict info, we need to save the SelectorExpr of a generic method
call when making its sub-dictionary entry. The generic method call will
eventually be transformed into a function call on the method shape
instantiation, so we may not always have the selector info available
when we need it to create a dictionary. We use this SelectorExpr as
needed if the relevant call node has already been transformed.
Similarly, we save the InstExpr of generic function calls, since the
InstExpr will be dropped when the function call is transformed to a call
to a shape instantiation. We use this InstExpr if the relevant function
call has already been transformed.
Added an extra generic function Some2 and a call to it from Some that
exercises the generic function case. The existing test already tests the
method call case.
Fixes#50264
Change-Id: I2c7c7d79a8e33ca36a5e88e64e913c57500c97f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/373754
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Since we use existing instantiations from the symbol table when possible
(to make sure each instantiation is unique), we need to pop
instantiations of local types when leaving the containing scope.
g.stmts() now pushes and pops scope, and we do a Pushdcl() in g.typ0()
when creating an instantiation of a local type.
Non-instantiated local types (generic or not) are translated directly
from types2, so they don't need to be pushed/popped. We don't export
function bodies with local types, so there is no issue during import.
We still don't support local types in generic functions/methods.
Fixes#50177
Change-Id: If2d2fe71aec003d13f0338565c7a0da2c9580a14
Reviewed-on: https://go-review.googlesource.com/c/go/+/372654
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The imported code is already typechecked. NodAddrAt typechecks its
argument, which is unnecessary here and leads to errors when
typechecking unexported field references in other packages' code.
Mark the node is question as already typechecked, so we don't
retypecheck it.
Fixes#50148
Change-Id: I9789e3e7dd4d58ec095675e27b1c98389f7a0c44
Reviewed-on: https://go-review.googlesource.com/c/go/+/371554
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Generic instantiations can produce conversions from constant
literal ints or floats to complex values. We could constant literals
during instantiation, but it is just as easy to upgrade the code
generator to do the conversions.
Fixes#50193
Change-Id: I24bdc09226c8e868f6282e0e4057ba6c3ad5c41a
Reviewed-on: https://go-review.googlesource.com/c/go/+/372514
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Thanks to the simpler test case for issue 50109. I'm keeping the old
test case in place, since it's not too complex, and may be useful for
testing other things as well.
Updates #50109
Change-Id: I80cdbd1da473d0cc4dcbd68e45bab7ddb6f9263e
Reviewed-on: https://go-review.googlesource.com/c/go/+/371515
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: roger peppe <rogpeppe@gmail.com>
The builtin "any" type should only be identical to an unnamed empty
interface type, not a defined empty interface type.
Fixes#50169.
Change-Id: Ie5bb88868497cb795de1fd0276133ba9812edfe4
Reviewed-on: https://go-review.googlesource.com/c/go/+/372217
Trust: Cherry Mui <cherryyz@google.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
We delay all transformations on generic functions, and only do them on
instantiated functions, for several reasons, of which one is that
otherwise the compiler won't understand the relationship between
constrained type parameters. In an instantiation with shape arguments,
the underlying relationship between the type arguments are clear and
don't lead to compiler errors.
This issue is because I missed delaying assignment transformations for
variable declarations. So, we were trying to transform an assignment,
and the compiler doesn't understand the relationship between the T and U
type parameters.
The fix is to delay assignment transformations for variable declarations
of generic functions, just as we do already for normal assignment
statements.
A work-around for this issue would be to just separate the assignment
from the variable declaration in the generic function (for this case of
an assignment involving both of the constrained type parameters).
Fixes#50147
Change-Id: Icdbcda147e5c4b386e4715811761cbe73d0d837e
Reviewed-on: https://go-review.googlesource.com/c/go/+/371534
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
We can import an shape-instantiated function/method for inlining
purposes. If we are instantiating the methods of a instantiated type
that we have seen, and it happens to need a shape instantiation that we
have imported, then don't re-create the instantiation, since we will end
up with conflicting/duplicate definitions for the instantiation symbol.
Instead, we can just use the existing imported instantation, and enter
it in the instInfoMap[].
Fixes#50121
Change-Id: I6eeb8786faad71106e261e113048b579afad04fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/371414
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
A "RET f(SB)" wasn't assembled correctly in a leaf function with
non-zero frame size. Follows CL 371034, for MIPS(32/64)(be/le)
and S390X. Other architectures seem to do it right. Add a test.
Change-Id: I41349a7ae9862b924f3a3de2bcb55b782061ce21
Reviewed-on: https://go-review.googlesource.com/c/go/+/371214
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
In identical(), we don't want any to match a shape empty-interface type
for the identStrict option, since IdenticalStrict() is specifically not
supposed to match a shape type with a non-shape type.
There is similar code in (*Type).cmp() (TINTER case), but I don't
believe that we want to disqualify shape types from matching any in this
case, since cmp() is used for back-end code, where we don't care about
shape types vs non-shape types.
The issue mainly comes about when 'any' is used as a type argument
(rather than 'interface{}'), but only with some complicated
circumstances, as shown by the test case. (Couldn't reproduce with
simpler test cases.)
Fixes#50109
Change-Id: I3f2f88be158f9ad09273237e1d346bc56aac099f
Reviewed-on: https://go-review.googlesource.com/c/go/+/371154
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Augmented some of the typeswitch*.go tests so that some instantiations
have duplicate cases, in order to ensure we're testing that.
Spacing changes in the tests are due to gofmt.
Change-Id: I5d3678813505c520c544281d4ac8a62ce7e236ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/370155
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Deal with case where a certain instantiation of a generic
function/method leads to an unsatisfiable type assertion or type case.
In that case, the compiler was causing a fatal error while trying to
create an impossible itab for the dictionary. To deal with that case,
allow ITabLsym() to create a dummy itab even when the concrete type
doesn't implement the interface. This dummy itab is analogous to the
"negative" itabs created on-the-fly by the runtime.
We will use the dummy itab in type asserts and type switches in
instantiations that use that dictionary entry. Since the dummy itab can
never be used for any real value at runtime (since the concrete type
doesn't implement the interface), there will always be a failure for the
corresponding type assertion or a non-match for the corresponding
type-switch case.
Fixes#50002
Change-Id: I1df05b1019533e1fc93dd7ab29f331a74fab9202
Reviewed-on: https://go-review.googlesource.com/c/go/+/369894
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The type was changed in https://golang.org/cl/3991043 but the comment
wasn't updated.
Change-Id: I7ba3f625c732e5e801675ffc5d4a28e1d310faa3
Reviewed-on: https://go-review.googlesource.com/c/go/+/369374
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Make sure that we can import/export selects for generics.
Change-Id: Ibf36e98fc574ce9275820aa426b3e6703b0aae6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/369101
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Enable a bunch of types2-related error tests to run successfully, so
they no longer have to be disabled in run.go.
- directive.go: split it into directive.go and directive2.go, since the
possible errors are now split across the parser and noder2, so they
can't all be reported in one file.
- linkname2.go: similarly, split it into linkname2.go and linkname3.go
for the same reason.
- issue16428.go, issue17645.go, issue47201.dir/bo.go: handle slightly
different wording by types2
- issue5609.go: handle slight different error (array length must be
integer vs. array bound too large).
- float_lit3.go: handle slightly different wording (overflows
float vs cannot convert to float)
I purposely didn't try to fix tests yet where there are extra or missing
errors on different lines, since that is not easy to make work for both
-G=3 and -G=0. In a later change, will flip to make the types2 version
match correctly, vs. the -G=0 version.
Change-Id: I6079ff258e3b90146335b9995764e3b1b56cda59
Reviewed-on: https://go-review.googlesource.com/c/go/+/368455
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
First, we need to set base.Pos in varDecl() and typeDecl(), so it will
be correct if we need to report type size errors while converting types.
Changed error calls in types/sizes.go to use Errorf, not ErrorfAt, since
we want to use base.Pos (which will set from t.Pos(), if that is
available).
Second, we need to add an extra call CalcSize(t1.Elem()) in the
TCHANARGS case of CalcSize(). We can use CalcSize() rather than
CheckSize(), since we know the top-level recursive type will have been
calculated by the time we process the fake TCHANARGS type. In -G=0 mode,
the size of the channel element has often been calculated because of
some other processing (but not in the case of #49767). But in -G=3 mode,
we just calculate sizes during the single noder2 pass, so we are more
likely to have not gotten to calculating the size of the element yet,
depending on the order of processing of the deferredTypeStack.
Fixes the tests fixedbugs/issue{42058a,42058b}.go that were
disabled for -G=3 mode.
Had to add exceptions in stdlib_test.go for go/types and types2, because
the types2 typechecker does not know about type size limits.
Fixes#49814Fixes#49771
Updates #49767
Change-Id: I77d058e8ceff68a58c4c386a8cf46799c54b04c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/367955
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When we set g.curDecl for the type params created during fillinMethods
for an instantiated type, we need to save/restore its value, because
fillinMethods() may be called while processing a typeDecl. We want the
value of g.curDecl to continue to be correct for type params created in
the typeDecl. Because of ordering issues, not restoring g.curDecl
happens to cause problems (which don't always show up visibly) exactly
when a type param is not actually used in a type declaration.
Cleared g.curDecl to "" at the later points in typeDecl() and
funcDecl(). This allows adding asserts that g.curDecl is always empty
("") when we set it in typeDecl() and funcDecl(), and always non-empty
when we use it in typ0().
Fixes#49893
Change-Id: Ic2fb1df791585bd257f2b86ffaae0453c31705c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/368454
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Currently, identical handles any and interface{} by checking against
Types[TINTER]. This is not always true, since when two generated
interface{} types may not use the same *Type instance.
Instead, we must check whether Type is empty interface or not.
Fixes#49875
Change-Id: I28fe4fc0100041a01bb03da795cfe8232b515fc4
Reviewed-on: https://go-review.googlesource.com/c/go/+/367754
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Thanks to emmanuel@orijtech.com who wrote the initial version of
this change (CL 354490).
This change is following CL 354490 in idea but also contains various
simplifications, slightly improved printing of signature/type patterns,
adjustments for types2, and some fine-tuning of error positions.
Also adjusted several ERROR regexp patterns.
Fixes#48834.
Fixes#48835.
Change-Id: I31cf20c81753b1dc84836dbe83a39030ceb9db23
Reviewed-on: https://go-review.googlesource.com/c/go/+/364874
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
This patch revises the fix for issue 46234, fixing a bug that was
accidentally introduced by CL 320913. When inlining a chunk of code
with a closure expression, we want to avoid updating the source
positions in the function being closed over, but we do want to update
the position for the ClosureExpr itself (since it is part of the
function we are inlining). CL 320913 unintentionally did away with the
closure expr source position update; here we restore it again.
Updates #46234.
Fixes#49171.
Change-Id: Iaa51bc498e374b9e5a46fa0acd7db520edbbbfca
Reviewed-on: https://go-review.googlesource.com/c/go/+/366494
Trust: Than McIntosh <thanm@google.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
When we have a typed nil, we already say so; thus it is sufficient
to use "nil" in all the other cases.
This is closer to (1.17) compiler behavior. In cases where the
1.17 compiler prints "untyped nil" (e.g., wrong uses of "copy"),
we already print a different message. We can do better in those
cases as well; will be addressed in a separate CL (see #49735).
Fixes#48852.
Change-Id: I9a7a72e0f99185b00f80040c5510a693b1ea80f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/366276
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
For -G=3 for test using 'any'.
Change-Id: Ia37ee944a38be4f4330e62ad187f10f2d42e41bd
Reviewed-on: https://go-review.googlesource.com/c/go/+/365839
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
In the case where we need to re-export a generic function/method from
another package in the export data of the current package, make sure it
is loaded before trying to write it out.
Fixed#49667
Change-Id: I177754bb762689f34cf5c8ad246d43f1cdbbf195
Reviewed-on: https://go-review.googlesource.com/c/go/+/365837
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
`types.Types[types.TINTER]` is already used for `interface{}`, so we
can conveniently just extend the existing logic that substitutes
`byte` and `rune` with `uint8` and `int32` to also substitute `any`.
Fixes#49665.
Change-Id: I1ab1954699934150aab899b35037d5611c8ca47e
Reviewed-on: https://go-review.googlesource.com/c/go/+/365354
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
It causes a crash because of the unexpected XDOT operation. It's not
needed, since we will run ComputeAddrTaken() on function instantiations
after stenciling. And it's not always correct, since we may not be able
to distinguish between a array and a slice, if a type is dependent on a
type param.
However, we do need to call ComputeAddrTaken on instantiations created
during inlining, since that is after the main ComputeAddrTaken pass.
Fixes#49659
Change-Id: I0bb610cf11f14e4aa9068f6ca2a012337b069c79
Reviewed-on: https://go-review.googlesource.com/c/go/+/365214
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Use actual unmapped memory instead of small integers to make
pointers that will fault when accessed.
Fixes#49562
Change-Id: I2c60c97cf80494dd962a07d10cfeaff6a00f4f8e
Reviewed-on: https://go-review.googlesource.com/c/go/+/364914
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 364377 emitted definition of 'any' when compiling runtime. But 'any'
is only available when generic enabled. Thus emitting its definition
unconditionally causes the compiler crashes.
Updates #49619
Change-Id: I0888ca1cbc7a7df300310a99a344f170636333f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/364614
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Include the predefined type 'any' in the list of other important
predefined types that are emitted when compiling the runtime package
(uintptr, string, etc).
Fixes#49619.
Change-Id: I4a851ba2f302fbc3a425e65daa325c6bf83659da
Reviewed-on: https://go-review.googlesource.com/c/go/+/364377
Trust: Than McIntosh <thanm@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Type constraint satisfaction is interface implementation.
Adjusted a few error messages.
Change-Id: I4266af78e83131a76b1e3e44c847a21de760ac6e
Reviewed-on: https://go-review.googlesource.com/c/go/+/363839
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
We hope to support this feature one day, but it doesn't work currently.
Issue a nice error message instead of having the compiler crash.
Update #47631
Change-Id: I0359411410acbaf9a5b9dbb988cd933de1bb8438
Reviewed-on: https://go-review.googlesource.com/c/go/+/364054
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
A recent change to error message formatting was missing a nil check.
Fixes#49592
Change-Id: Ic1843e0277ba75eec0e8e41fe34b59c323d7ea31
Reviewed-on: https://go-review.googlesource.com/c/go/+/364034
Trust: Robert Findley <rfindley@google.com>
Trust: Dan Scales <danscales@google.com>
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
We want package names exposed by reflect to be things like
main.F[main.foo], not main.F["".foo].
Fixes#49547
Change-Id: I182411a75d56ce1f64fde847e5b9ee74ce44e00b
Reviewed-on: https://go-review.googlesource.com/c/go/+/363656
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
This test is failing with -G=0, so specify -G=3.
Change-Id: I4c74707d0a43f8191cb0b156204604458ba85136
Reviewed-on: https://go-review.googlesource.com/c/go/+/363699
Trust: Robert Findley <rfindley@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
When being used by the compiler, augment the types2 missing method
message with extra info, if a method is missing, but a method with the
correct name except for case (i.e. equal via string.EqualFold()) is
present. In that case, print out the wanted method and the method that
is present (that has the wrong case).
In the 1.17 compiler, we don't do this case-folding check when assigning
an interface to an interface, so I didn't add that check, but we could
add that.
Fixes#48471
Change-Id: Ic54549c1f66297c9221d979d49c1daa719aa66cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/363437
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
When being used by the compiler, fix up types2 error messages to be more
like Go 1.17 compiler errors. In particular:
- add information about which method is missing when a type is not
assignable/convertible/etc. to an interface.
- add information about any existing method which has the same name,
but wrong type.
- add extra hint in the case that the source or destination type is a
pointer to an interface, rather than an interface.
- add extra hint "need type assertion" in the case that the source is
an interface that is implemented by the destination.
- the following change in the CL stack also adds information about any
existing method with a different name that only differs in case.
Include much of the new logic in a new common function
(*Checker).missingMethodReason().
types2 still adds a little more information in some cases then the Go
1.17 compiler. For example, it typically says "(value of type T)",
rather than "(type T)", where "value" could also be "constant",
"variable", etc.
I kept the types2 error messages almost all the same when types2 is not
used by the compiler. The only change (to reduce amount of compatibility
code) was to change "M method" phrasing in one case to "method M"
phrasing in one error message (which is the phrasing it uses in all
other cases). That is the reason that there are a few small changes in
types2/testdata/check/*.src.
Added new test test/fixedbugs/issue48471.go to test that the added
information is appearing correctly.
Also adjusted the pattern matching in a bunch of other
test/fixedbugs/*.go, now that types2 is producing error messages closer
to Go 1.17. Was able to remove a couple test files from the types2
exception list in run.go.
Updated #48471
Change-Id: I8af1eae6eb8a5541d8ea20b66f494e2e795e1956
Reviewed-on: https://go-review.googlesource.com/c/go/+/363436
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Like OFUNCINST, in case of OXDOT call expression, the arguments need
to be transformed earlier, so any needed CONVIFACE nodes are exposed.
Fixes#49538
Change-Id: I275ddf6f53a9cadc8708e805941cdf7bdffabba9
Reviewed-on: https://go-review.googlesource.com/c/go/+/363554
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Currently the recover4 test, which recovers from a panic created from a
fault, generates a fault by creating a hole in a mapping. It does this
via munmap. However, it's possible the runtime can create a new mapping
that ends up in that hole, for example if the GC executes, causing the
test to fail.
In fact, this is the case now with a smaller minimum heap size.
Modify the test to use mprotect, and clean up the code a little while
we're here: define everything in terms of the length of original
mapping, deduplicate some constants and expressions, and have the test
recover properly even if recover() returns nil (right now it panics
because it fails to type assert nil as error).
Fixes#49381.
Change-Id: If399eca564466e5e8aeb2dc6f86a246d0fce7b5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/363534
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Our compiler gets confused between functions that were declared
with no body, and those which have a body but it is empty.
Ensure that when stenciling, we generate a nonempty body.
The particular test that causes this problem is in
cmd/compile/internal/gc/main.go:enqueueFunc. It thinks that if
a function has no body, then we need to generate ABI wrappers for
it, but not compile it.
Fixes#49524
Change-Id: Id962666a2098f60a2421484b6a776eafdc4f4a63
Reviewed-on: https://go-review.googlesource.com/c/go/+/363395
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
When building a call expression for function instantiation closure, if
it's a variadic function, the CallExpr.IsDDD must be set for typecheck
to work properly. Otherwise, there will be a mismatch between the
arguments type and the function signature.
Fixes#49516
Change-Id: I0af90ee3fcc3e6c8bba8b20e331e044cbce17985
Reviewed-on: https://go-review.googlesource.com/c/go/+/363314
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For #49512
Change-Id: Ic08652a4ec611b27150bf10b1118c1395715e5d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/363156
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
For generic functions, we can export untransformed OKEY nodes, and the
key identifier is written as an ONONAME. But in this case, we do not
want to call Resolve() on the identifier, since we may resolve to a
global type (as happens in this issue) or other global symbol with the
same name, if it exists. We just want to keep the key identifier as an
Ident node.
To solve this, I added an extra bool when exporting an ONONAME entry,
which indicates if this entry is for a key or for a global (external)
symbol. When the bool is true (this is for a key), we avoid calling
Resolve().
Fixes#49497
Change-Id: Ic8fa93d37bcad2110e0e0d060080b733e07e35d7
Reviewed-on: https://go-review.googlesource.com/c/go/+/363074
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
If we reach a generic type that is part of a cycle
and we are in a type parameter list, we have a cycle
through a type parameter list, which is invalid.
Fixes#49439.
Change-Id: Ia6cf97e1748ca0c0e61c02841202050091365b0b
Reviewed-on: https://go-review.googlesource.com/c/go/+/361922
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
When bulding formal arguments of newly created closure, irgen forgets to
set "..." field attribute, causing type mismatched between the closure
function and the ONAME node represents that closure function.
Fixes#49432
Change-Id: Ieddaa64980cdd3d8cea236a5a9de0204ee21ee39
Reviewed-on: https://go-review.googlesource.com/c/go/+/361961
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
CL 361411 improved error message for go version requirement, but forgot
to update the test in cmd/go to match new error message. That causes
longtest builders failed.
This CL changes mod_vendor_goversion.txt to match compiler error, and
limit fixedbugs/issue49368.go to run with -G=3 only.
Updates #49368
Change-Id: I125fe0a8c2a1595066d39c03e97819e7a1274e0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/361963
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The openDeferRecord always insert vardef/varlive pairs into the entry block, it may destroy the mem chain when LECall's args are writing into the same block. So create a new block before that happens.
Fixes#49282
Change-Id: Ibda6c4a45d960dd412a641f5e02276f663c80785
Reviewed-on: https://go-review.googlesource.com/c/go/+/361410
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Trust: Than McIntosh <thanm@google.com>
Reviewed-by: David Chase <drchase@google.com>
CL 360057 fixed missing update source type in storeArgOrLoad. However,
we should only update the type when processing struct/array. If we
update the type right before calling storeArgOrLoad, we may generate a
value with invalid type, e.g, OpStructSelect with non-struct type.
Fixes#49378
Change-Id: Ib7e10f72f818880f550aae5c9f653db463ce29b0
Reviewed-on: https://go-review.googlesource.com/c/go/+/361594
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This adds a debugging hook for optionally calling a "maymorestack"
function in the prologue of any function that might call morestack
(whether it does at run time or not). The maymorestack function will
let us improve lock checking and add debugging modes that stress
function preemption and stack growth.
Passes toolstash-check -all (except on js/wasm, where toolstash
appears to be broken)
Fixes#48297.
Change-Id: I27197947482b329af75dafb9971fc0d3a52eaf31
Reviewed-on: https://go-review.googlesource.com/c/go/+/359795
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Adjust TypeDefn(), which is used by reportTypeLoop(), to work for nodes
with no Ntype set (which are all nodes in -G=3 mode). Normally,
reportTypeLoop() would not be called, because the types2 typechecker
would have already caught it. This is a possible way to report an
unusual type loop involving type params, which is not being caught by
the types2 type checker.
Updates #48962
Change-Id: I55edee46026eece2e8647c5b5b4d8dfb39eeb5f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/361398
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Don't inline a function fn that has no shape parameters, but is passed
at least one shape arg. This means we must be inlining a non-generic
function fn that was passed into a generic function, and can be called
with a shape arg because it matches an appropriate type parameter. But
fn may include an interface conversion (that may be applied to a shape
arg) that was not apparent when we first created the instantiation of
the generic function. We can't handle this if we actually do the
inlining, since we want to know all interface conversions immediately
after stenciling. So, we avoid inlining in this case.
Fixes#49309.
Change-Id: I7b8ab7b13e58fdb0111db91bc92a91d313f7c2c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/361260
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
After removing trivial wrapper types, the source needs to be updated
with new type, otherwise, it leads to mismatch between field offset and
the source type for selecting struct/array.
Fixes#49249
Change-Id: I26f9440bcb2e78bcf0617afc21d9d40cdbe4aca6
Reviewed-on: https://go-review.googlesource.com/c/go/+/360057
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Pointers to arrays can be used to cast from a slice. We need
the shape of such type params to be different so we can compile
those casts correctly.
This is kind of a big hammer to fix#49295. It would be nice to
only do this when we know there's a []T->*[N]T conversion.
Fixes#49295
Change-Id: Ibda33057fab2dd28162537aab0f1244211d68e3f
Reviewed-on: https://go-review.googlesource.com/c/go/+/361135
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Add test for indexing on variables whose types are constrained to
various kinds of types.
Change-Id: I991eecfe39dba5d817c0fbe259ba558d4881ea84
Reviewed-on: https://go-review.googlesource.com/c/go/+/360867
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The types of the two interfaces should be equal, but they aren't.
We end up with multiple descriptors for a type when we need type
descriptors to be unique.
Fixes#49241
Change-Id: I8a6c70da541c6088a92a01392bc83b61cc130eba
Reviewed-on: https://go-review.googlesource.com/c/go/+/360134
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When seeing Key:Value expression in slice literal, the compiler only
needs to emit tmp var for the Value, not the whole expression.
Fixes#49240
Change-Id: I7bda3c796a93c0fa1974f7c5930f38025dfa665c
Reviewed-on: https://go-review.googlesource.com/c/go/+/360055
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In case of reference to method call of an imported fully-instantiated
type, nameNode.Func will be nil causes checkFetchBody panic. To fix
this, make sure checkFetchBody is only called when Func is not nil.
Fixes#49246
Change-Id: I32e9208385a86d4600d8ebf6f5efd8fca571ea16
Reviewed-on: https://go-review.googlesource.com/c/go/+/360056
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Updated multiple tests in test/codegen/arithmetic.go to verify
on ppc64/ppc64le as well
Change-Id: I79ca9f87017ea31147a4ba16f5d42ba0fcae64e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/358546
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Currently, the compiler will emit any const that doesn't fit in an
int64 to go_asm.h like
#define const_stackPreempt constant.intVal{val:(*big.Int)(0xc000c06c40)}
This happens because dumpasmhdr formats the constant.Value using the
verb "%#v". Since constant.Value doesn't implement the GoString()
method, this just prints the Go-syntax representation of the value.
This happens to work for small integer constants, which go/constant
represents directly as an int64, but not for integer constants that
don't fit in an int64, which go/constant represents as a big.Int.
Make these constants usable by changing the formatting verb to "%v",
which will call the String() method, giving a reasonable result in all
cases.
Change-Id: I365eeb88c8acfc43ff377cc873432269bde3f541
Reviewed-on: https://go-review.googlesource.com/c/go/+/359954
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Use types2.Structure() to get single underlying type of typeparams, to
handle some unusual cases where a type param is constrained to a single
underlying struct or map type.
Fixes#48538
Change-Id: I289fb7b31d489f7586f2b04aeb1df74e15a9f965
Reviewed-on: https://go-review.googlesource.com/c/go/+/359335
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fix two defer bugs related to adding/removing open defer entries.
The bugs relate to the way that we add and remove open defer entries
from the defer chain. At the point of a panic, when we want to start
processing defer entries in order during the panic process, we need to
add entries to the defer chain for stack frames with open defers, since
the normal fast-defer code does not add these entries. We do this by
calling addOneOpenDeferFrame() at the beginning of each time around the
defer loop in gopanic(). Those defer entries get sorted with other open
and non-open-coded defer frames.
However, the tricky part is that we also need to remove defer entries if
they end not being needed because of a recover (which means we are back
to executing the defer code inline at function exits). But we need
to deal with multiple panics and in-process defers on the stack, so we
can't just remove all open-coded defers from the the defer chain during
a recover.
The fix (and new invariant) is that we should not add any open-coded
defers to the defer chain that are higher up the stack than an open-coded
defer that is in progress. We know that open-coded defer will still be
run until completed, and when it is completed, then a more outer frame
will be added (if there is one). This fits with existing code in gopanic
that only removes open-coded defer entries up to any defer in progress.
These bugs were because of the previous inconsistency between adding and
removing open defer entries, which meant that stale defer entries could
be left on the list, in these unusual cases with both recursive
panics plus multiple independent (non-nested) cases of panic & recover.
The test for #48898 was difficult to add to defer_test.go (while keeping
the failure mode), so I added as a go/test/fixedbug test instead.
Fixes#43920
Updates #43941Fixes#48898
Change-Id: I593b77033e08c33094315abf8089fbc4cab07376
Reviewed-on: https://go-review.googlesource.com/c/go/+/356011
Trust: Dan Scales <danscales@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Austin Clements <austin@google.com>
We may revisit this decision in a future release. By disallowing this
for Go 1.18 we are ensuring that we don't lock in the generics design
in a place that may need to change later. (Type declarations are the
primary construct where it crucially matters what the underlying type
of a type parameter is.)
Comment out all tests that rely on this feature; add comments referring
to issue so we can find all places easily should we change our minds.
Fixes#45639.
Change-Id: I730510e4da66d3716d455a9071c7778a1e4a1152
Reviewed-on: https://go-review.googlesource.com/c/go/+/359177
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Now that we permit arbitrary types as constraints, we no longer need them.
For #48424
Change-Id: I15fef26a563988074650cb0801895b002c44148a
Reviewed-on: https://go-review.googlesource.com/c/go/+/359258
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fixes#49110
Change-Id: I32c2cb26cca067a4a676ce4bbc3e51f1e0cdb259
Reviewed-on: https://go-review.googlesource.com/c/go/+/357959
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dan Kortschak <dan@kortschak.io>
Reviewed-by: Sebastien Binet <s@sbinet.org>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
For base generic type that is written to export file, we need to mark
all of its methods, include exported+unexported methods, as reachable,
so they can be available for instantiation if necessary. But markType
only looks for exported methods, thus causing the crash in #49143.
To fix this, we introduce new method p.markGeneric, to mark all methods
of the base generic type.
This issue has happend for a while (maybe since we add generic
import/export during go1.18 cycle), and was un-intentionally "fixed" in
CL 356254, when we agresssively call p.markEmbed(t). CL 357232 fixed
that wrong agressive behavior, thus reproduce the bug on tip.
Fixes#49143
Change-Id: Ie64574a05fffb282e9dcc8739df4378c5b6b0468
Reviewed-on: https://go-review.googlesource.com/c/go/+/358814
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
There were two main outer switch statements in node() that can just be
combined. Also, for simplicity, changed an IsCmp() conditional into just
another case in the switch statement.
Also, the inner OCALL switch statement had a bunch of fairly duplicate
cases. Combined the cases that all had no special semantics, into a
single default case calling transformCall().
In the OCALL case in dictPass(), got rid of a check for OFUNCINST (which
will always have been removed by this point). Also, eliminated an assert
that could cause unneded failures. transformCall() should always be
called if the node op is still OCALL, so no need to assert on the ops of
call.X.
Added an extra test in issue47078.go, to explicitly check for case where
the X argument of a call is a DOTTYPE.
Change-Id: Ifb3f812ce12820a4ce08afe2887f00f7fc00cd2f
Reviewed-on: https://go-review.googlesource.com/c/go/+/358596
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
To capture the fact that a method was called on a generic interface,
so we can make sure the linker doesn't throw away any implementations
that might be the method called.
See the comment in reflect.go for details.
Fixes#49049
Change-Id: I0be74b6e727c1ecefedae072b149f59d539dc1e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/357835
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
CL 357649 fixes inlining labeled FOR/RANGE loops,
we should do same translation for inlined SWITCH's label
Fixes#49145
Change-Id: I9a6f365f57e974271a1eb279b38e81f9b5148788
Reviewed-on: https://go-review.googlesource.com/c/go/+/358315
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
removePred and removeArg do different things. removePred moves the last
predecessor to index k, whereas removeArg slides all the args k or
greater down by 1 index.
Kind of unfortunate different behavior in things named similarly.
Fixes#49122
Change-Id: I9ae409bdac744e713f4c121f948e43db6fdc8542
Reviewed-on: https://go-review.googlesource.com/c/go/+/358117
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Since CL 282892, functions are always compiled before closures. To do
that, when walking the closure, it is added to its outer function queue
for scheduling compilation later. Thus, a closure may be added to queue
more than once, causing the ICE dues to being compiled twice.
To fix this, catching the re-walking of the closure expression and do
not add it to the compilation queue.
Fixes#49029
Change-Id: I7d188e8f5b4d5c4248a0d8e6389da26f1084e464
Reviewed-on: https://go-review.googlesource.com/c/go/+/357960
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 356254 fixed crawling of embeddable types during inline. However, we
are too agressive, since when we call markEmbed for every type seen
during inlining function body. That leads to false positive that for a
non-embedded type, its unexported methods are also marked inline.
Instead, we should only look at struct type that we seen during inlining
function body, and calling markEmbed for all of its embedded fields.
Fixes#49094
Change-Id: I6ef9a8bf1fc649ec6bf75e4883f6031ec8560ba1
Reviewed-on: https://go-review.googlesource.com/c/go/+/357232
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
There is already a mechanism using inlgen to rename labels insided
inlined functions so that they are unique and don't clash with loops in
the outer function. This is used for OLABEL and OGOTO. Now that we are
doing inlining of OFOR loops, we need to do this translation for OBREAK,
OCONTINUE, and OFOR. I also added the translation for ORANGE loops, in
anticipation of a CL that will allow inlining of ORANGE for loops.
Fixes#49100
Change-Id: I2ccddc3350370825c386965f4a1e4bc54d3c369b
Reviewed-on: https://go-review.googlesource.com/c/go/+/357649
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
In CL 327872, there's a fix for crawling of embeddable types directly
reached by the user, so all of its methods need to be re-exported. But
we missed the cased when an un-exported type may be reachable by
embedding in exported type. Example:
type t struct {}
func (t) M() {}
func F() interface{} { return struct{ t }{} }
We generate the wrapper for "struct{ t }".M, and when inlining call to
"struct{ t }".M makes "t.M" reachable.
It works well, and only be revealed in CL 327871, when we changed
methodWrapper to always call inline.InlineCalls, thus causes the crash
in #49016, which involve dot type in inlined function.
Fixes#49016
Change-Id: If174fa5575132da5cf60e4bd052f7011c4e76c5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/356254
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Change-Id: I2fca7a801c85ed93c002c23bfcb0cf9593f1bdf4
Reviewed-on: https://go-review.googlesource.com/c/go/+/356571
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
This CL addresses the 2nd part of the issue below.
- For types2, now use the same error messages as the compiler in this case.
- Make the mechanism for reporting clarifying error messages handle the case
where we don't have additional position information.
- Provide context information (type assertion vs type switch).
Fixes#49005.
Change-Id: I4eeaf4f0c3f2f8735b63993778f58d713fef21ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/356512
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Findley <rfindley@google.com>
In CL 354670, I copied some existing rules for convenience but forgot
to update the last rule which broke `GOAMD64=v3 ./make.bat`
Revive CL 354670
Change-Id: Ic1e2047c603f0122482a4b293ce1ef74d806c019
Reviewed-on: https://go-review.googlesource.com/c/go/+/356810
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Go Bot <gobot@golang.org>
It was noticed through some other investigation that BitLen32
was not generating the best code and found that it wasn't recognized
as an intrinsic. This corrects that and enables the test for PPC64.
Change-Id: Iab496a8830c8552f507b7292649b1b660f3848b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/355872
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
After CL 349012 and CL 350911, we can fully handle these
labeled statements, so we can allow them when inlining.
Updates #14768
Change-Id: I0ab3fd3f8d7436b49b1aedd946516b33c63f5747
Reviewed-on: https://go-review.googlesource.com/c/go/+/355497
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: David Chase <drchase@google.com>
Trust: Dan Scales <danscales@google.com>
This CL avoids a useless follow-on error (that gets reported before the
actual error due to source position). This addresses the first part of
the issue below.
Thanks to @cuonglm for the suggestion for the fix.
For #49005.
Change-Id: Ifdd83072a05c32e115dc58a0233868a64f336f3f
Reviewed-on: https://go-review.googlesource.com/c/go/+/356449
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Make sure that an embedded field like "MyStruct[T]" works and can be
referenced via the name MyStruct.
Change-Id: I8be1f1184dd42c4e54e4144aff2fd85e30af722f
Reviewed-on: https://go-review.googlesource.com/c/go/+/356312
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Modify the phase for creating needed function/method instantiations and
modifying functions to use those instantiations, so that the phase is
self-contained and can be called again after inlining. This is to deal
with the issue that inlining may reveal new fully-instantiated types
whose methods must be instantiated.
With this change, we have an extra phase for instantiation after
inlining, to take care of the new fully-instantiated types that have
shown up during inlining. We call inline.InlineCalls() for any new
instantiated functions that are created.
Change-Id: I4ddf0b1907e5f1f7d45891db7876455a99381133
Reviewed-on: https://go-review.googlesource.com/c/go/+/352870
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Alexander Rakoczy <alex@golang.org>
Allow the user to construct slices that are larger than the Go heap as
long as they don't overflow the address space.
Updates #48798.
Change-Id: I659c8334d04676e1f253b9c3cd499eab9b9f989a
Reviewed-on: https://go-review.googlesource.com/c/go/+/355489
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add a test for a generic sort function, operating on several different
pointer types (across two packages), so they should all share the same
shape-based instantiation. Actually check that only one instantiation of
Sort is created using 'go tool nm', and also check that the output is
correct.
In order to do the test on the executable using 'go nm', added this as a
'go test' in cmd/compile/internal/test.
Added the genembed.go test that I meant to include with a previous CL.
Change-Id: I9962913c2f1809484c2b1dfef3b07e4c8770731c
Reviewed-on: https://go-review.googlesource.com/c/go/+/354696
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In the case in (*TSubster).Type() that we were running into an
incomplete underlying type (TFORW), we should just be immediately
returning the type returned by ts.SubstForwFunc(forw), since that call
returns a proper type node, and has set up any remaining work that has
to be done when we get done with the current top-level type definition.
(For import, that function is doInst, which does an Instantiate of the
new substituted type, with the delayed part via deferredInstStack.) We
should not continue doing the later parts of (*TSubster).Type(), since
the underlying type may not yet have its methods filled in, etc.
Also, in Instantiate(), we need to put the desired new type on
deferredInstStack, even if the base type node already exists, if the
type node is in TFORW state. This is now exactly the case when
Instantiate is called from (*TSubster).Type via doInst, since
(*TSubster).Type has already called NewIncompleteNamedType().
Fixes#48716Fixes#48889
Change-Id: Icd6be5721c4ac75bf8869b8bbdeca50069d632ec
Reviewed-on: https://go-review.googlesource.com/c/go/+/355250
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We reuse a value for the same selector on the same arg. But if the
value is already marked dead, don't reuse it. A use of an
OpInvalid will confuse the compiler.
Fixes#48916.
Change-Id: I15b9e15b49f6e1991fe91df246cd12a193385e85
Reviewed-on: https://go-review.googlesource.com/c/go/+/355409
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The code generated when storing eight bytes loaded from memory in big
endian introduced two successive byte swaps that did not actually
modified the data.
The new rules match this specific pattern both for amd64 and for arm64,
eliminating the double swap.
Fixes#41684
Change-Id: Icb6dc20b68e4393cef4fe6a07b33aba0d18c3ff3
Reviewed-on: https://go-review.googlesource.com/c/go/+/320073
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Daniel Martí <mvdan@mvdan.cc>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
For this unusual case, where a constraint specifies exactly one type, we
can have a COMPLIT expression with a type that is/has typeparams.
Therefore, we add code to delay transformCompLit for generic functions.
We also need to break out transformAddr (which corresponds to tcAddr),
and added code for delaying it as well. Also, we now need to export
generic functions containing untransformed OCOMPLIT and OKEY nodes, so
added support for that in iexport.go/iimport.go. Untransformed OKEY
nodes include an ir.Ident/ONONAME which we can now export.
Had to adjust some code/asserts in transformCompLit(), since we may now
be transforming an OCOMPLIT from an imported generic function (i.e. from
a non-local package).
Fixes#48537
Change-Id: I09e1b3bd08b4e013c0b098b8a25d082efa1fef51
Reviewed-on: https://go-review.googlesource.com/c/go/+/354354
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
This test is currently failing in the longtest builders.
I do not know how or why the builders are adding the -G=0 parameter.
Updates #48784
Change-Id: I62248d3fbc47567a8c73b4868a2d4aeb0bc47bc3
Reviewed-on: https://go-review.googlesource.com/c/go/+/354631
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The CL 349613 causes this problem.
In fact, we want to use the outer i to find m.List[i],
but the newly created index variable i in the nearest
for range shadow the outer i.
Fixes#48838.
Change-Id: I10f0bd985340f9443eefaadda6fc56e4e7e9a10c
Reviewed-on: https://go-review.googlesource.com/c/go/+/354549
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
In case of an invalid untyped nil conversion, the compiler's original
type checker leaves it to the caller to report a suitable error message.
But types2 does not, it always reports the invalid conversion.
CL 328053 made types2 report a better error message, and match the
original compiler behavior. But it ignored the case of untyped nil.
This CL adds that missing case, by checking whether the two operands can
be mixed when untyped nil is present.
Fixes#48784
Change-Id: Idc7d86eb0245aa18ca428e278f4416d6b3679058
Reviewed-on: https://go-review.googlesource.com/c/go/+/354049
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The encoding/binary little- and big-endian load and store routines are
frequently used in performance sensitive code. They look fairly complex
to the inliner. Though the routines themselves can be inlined,
code using them typically cannot be.
Yet they typically compile down to an instruction or two
on architectures that support merging such loads.
This change teaches the inliner to treat calls to these methods as cheap,
so that code using them will be more inlineable.
It'd be better to teach the inliner that this pattern of code is cheap,
rather than these particular methods. However, that is difficult to do
robustly when working with the IR representation. And the broader project
of which that would be a part, namely to model the rest of the compiler
in the inliner, is probably a non-starter. By way of contrast, imperfect
though it is, this change is an easy, cheap, and useful heuristic.
If/when we base inlining decisions on more accurate information obtained
later in the compilation process, or on PGO/FGO, we can remove this
and other such heuristics.
Newly inlineable functions in the standard library:
crypto/cipher.gcmInc32
crypto/sha512.appendUint64
crypto/md5.appendUint64
crypto/sha1.appendUint64
crypto/sha256.appendUint64
vendor/golang.org/x/crypto/poly1305.initialize
encoding/gob.(*encoderState).encodeUint
vendor/golang.org/x/text/unicode/norm.buildRecompMap
net/http.(*http2SettingsFrame).Setting
net/http.http2parseGoAwayFrame
net/http.http2parseWindowUpdateFrame
Benchmark impact for encoding/gob (the only package I measured):
name old time/op new time/op delta
EndToEndPipe-8 2.25µs ± 1% 2.21µs ± 3% -1.79% (p=0.000 n=28+27)
EndToEndByteBuffer-8 93.3ns ± 5% 94.2ns ± 5% ~ (p=0.174 n=30+30)
EndToEndSliceByteBuffer-8 10.5µs ± 1% 10.6µs ± 1% +0.87% (p=0.000 n=30+30)
EncodeComplex128Slice-8 1.81µs ± 0% 1.75µs ± 1% -3.23% (p=0.000 n=28+30)
EncodeFloat64Slice-8 900ns ± 1% 847ns ± 0% -5.91% (p=0.000 n=29+28)
EncodeInt32Slice-8 1.02µs ± 0% 0.90µs ± 0% -11.82% (p=0.000 n=28+26)
EncodeStringSlice-8 1.16µs ± 1% 1.04µs ± 1% -10.20% (p=0.000 n=29+26)
EncodeInterfaceSlice-8 28.7µs ± 3% 29.2µs ± 6% ~ (p=0.067 n=29+30)
DecodeComplex128Slice-8 7.98µs ± 1% 7.96µs ± 1% -0.27% (p=0.017 n=30+30)
DecodeFloat64Slice-8 4.33µs ± 1% 4.34µs ± 1% +0.24% (p=0.022 n=30+29)
DecodeInt32Slice-8 4.18µs ± 1% 4.18µs ± 0% ~ (p=0.074 n=30+28)
DecodeStringSlice-8 13.2µs ± 1% 13.1µs ± 1% -0.64% (p=0.000 n=28+28)
DecodeStringsSlice-8 31.9µs ± 1% 31.8µs ± 1% -0.34% (p=0.001 n=30+30)
DecodeBytesSlice-8 8.88µs ± 1% 8.84µs ± 1% -0.48% (p=0.000 n=30+30)
DecodeInterfaceSlice-8 64.1µs ± 1% 64.2µs ± 1% ~ (p=0.173 n=30+28)
DecodeMap-8 74.3µs ± 0% 74.2µs ± 0% ~ (p=0.131 n=29+30)
Fixes#42958
Change-Id: Ie048b8976fb403d8bcc72ac6bde4b33e133e2a47
Reviewed-on: https://go-review.googlesource.com/c/go/+/349931
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Many uses of Index/IndexByte/IndexRune/Split/SplitN
can be written more clearly using the new Cut functions.
Do that. Also rewrite to other functions if that's clearer.
For #46336.
Change-Id: I68d024716ace41a57a8bf74455c62279bde0f448
Reviewed-on: https://go-review.googlesource.com/c/go/+/351711
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL adds late expanded memequal(x, const, sz) inlining for 2, 4, 8
bytes size. This PoC is using the same method as CL 248404.
This optimization fires about 100 times in Go compiler (1675 occurrences
reduced to 1574, so -6%).
Also, added unit-tests to codegen/comparisions.go file.
Updates #37275
Change-Id: Ia52808d573cb706d1da8166c5746ede26f46c5da
Reviewed-on: https://go-review.googlesource.com/c/go/+/328291
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Trust: David Chase <drchase@google.com>
Add a simple test with an exported generic function that does
recover/defer, to test that recover/defer are exported/imported
properly (and a generic function with recover/defer works fine).
Change-Id: Idc3af101cbb78fc96bf945f1f5eab2740dd8994b
Reviewed-on: https://go-review.googlesource.com/c/go/+/353883
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
In case of amd64 the compiler issues checks if extensions are
available on a platform. With GOAMD64 microarchitecture levels
provided, some of the checks could be eliminated.
Change-Id: If15c178bcae273b2ce7d3673415cb8849292e087
Reviewed-on: https://go-review.googlesource.com/c/go/+/352010
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Change-Id: Icabef5cf75770ffde012b1fc785a72f53f9b2c46
Reviewed-on: https://go-review.googlesource.com/c/go/+/353669
Trust: Robert Griesemer <gri@golang.org>
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
This change enables the relaxed syntax for constraint literals
as proposed in issue #48424 and adds a simple smoke test for
the compiler. (Most of the relevant changes are in the syntax
and types2 package which have more extensive tests for this.)
This makes it possible to experiment with the new syntax while
we contemplate the fate of #48424.
If #48424 is accepted, this change can remain. If #48424 is
not accepted, reverting this CL will remove this feature in
the compiler.
For #48424.
Change-Id: I624fbb37c2f616ee9ad692e17e4fc75c9d5b06e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/353389
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
When collecting type parameters, wrap constraint literals of the
form ~T or A|B into interfaces so the type checker doesn't have
to deal with these type set expressions syntactically anywhere
else but in interfaces (i.e., union types continue to appear
only as embedded elements in interfaces).
Since a type constraint doesn't need to be an interface anymore,
we can remove the respective restriction. Instead, when accessing
the constraint interface via TypeParam.iface, wrap non-interface
constraints at that point and update the constraint so it happens
only once. By computing the types sets of all type parameters at
before the end of type-checking, we ensure that type constraints
are in their final form when accessed through the API.
For #48424.
Change-Id: I3a47a644ad4ab20f91d93ee39fcf3214bb5a81f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/353139
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This updates the codegen tests in noextend.go so they are not
dependent on the ABI.
Change-Id: I8433bea9dc78830c143290a7e0cf901b2397d38a
Reviewed-on: https://go-review.googlesource.com/c/go/+/353070
Trust: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Add rule to PPC64.rules to inline runtime.memmove in more cases, as is
done for other target architectures
Updated tests in codegen/copy.go to verify changes are done on
ppc64/ppc64le
Updates #41662
Change-Id: Id937ce21f9b4f4047b3e66dfa3c960128ee16a2a
Reviewed-on: https://go-review.googlesource.com/c/go/+/352054
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Trust: Lynn Boger <laboger@linux.vnet.ibm.com>
The computation for determining the shapes to use at the top of
getInstantation was not always creating shapes with the proper indexes.
If an instantiation is being called from another instantiated function,
we cannot just copy the shape types unchanged, because their indexes may
have changed. So, for type args that already shapes, we still call
Shapify() with the correct index.
Fixes#48645
Change-Id: Ibb61c6f9a3c317220fb85135ca87eb5ad4dcff9e
Reviewed-on: https://go-review.googlesource.com/c/go/+/353030
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We currently make dictionaries contain a relocation pointing to
methods that generic code might use, so that those methods are not
deadcode eliminated. However, with inlining we can end up not using
the dictionary, making the reference from the dictionary to the method
no longer keep the method alive.
Fix this by keeping the dictionary alive at generic interface call sites.
It's a bit of overkill, as we only need to keep the dictionary statically
alive. We don't actually need it dynamically alive, which is what KeepAlive
does. But it works. It ends up generating a LEAQ + stack spill that aren't
necessary, but that's pretty low overhead.
To make this work, I needed to stop generating methods on shape types.
We should do this anyway, as we shouldn't ever need them. But currently
we do use them! issue44688.go has a test that only works because it calls
a method on a shape type. I've disabled that test for now, will work on it
in a subsequent CL.
Fixes#48047
Change-Id: I78968868d6486c1745f51b8b43be0898931432a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/349169
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
In CL 349613,we have supported types.IdentityStrict() that does strict
type comparison.
Therefore, OCONVNOP becomes a possible case in call.X.Op().
Fixes#48604
Change-Id: Ibab27ffcf09656e3380314662f05f38294c1c6ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/351857
Trust: Dan Scales <danscales@google.com>
Trust: David Chase <drchase@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
For #48617
Change-Id: I6c00b7912c441ac323a0adede63b7d4a9ae6f92d
Reviewed-on: https://go-review.googlesource.com/c/go/+/351858
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
In CL 349614. we removed the early transformation code that
was needed to create the implicit CONVIFACE nodes.
Because the transformCall function is not called when translating OFUNCINST.
So we add in needed CONVIFACE nodes via typecheckaste().
Fixes#48598
Change-Id: If9dc7040cdc38ef2e52fdbb08c840095651426f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/351856
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Deal correctly with a blank local variable with type param type. This is
a special case, because a blank local variable is not in the fn.Dcl
list. In this case, we must explicitly create a new blank node with the
correct substituted type, so we have correct types if the blank local
variable has an initializing assignment.
Fixes#48602
Change-Id: I903ea44b29934e180404e32800773b7309bf297b
Reviewed-on: https://go-review.googlesource.com/c/go/+/352117
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
The delayTransform only checks whether ir.CurFunc is generic function or
not. but when compiling a non-generic closure inside a generic function,
we also want to delay the transformation, which delayTransform fails to
detect, since when ir.CurFunc is the closure, not the top level function.
Instead, we must rely on irgen.topFuncIsGeneric field to decide whether
to delay the transformation, the same logic with what is being done for
not adding closure inside a generic function to g.target.Decls list.
Fixes#48609
Change-Id: I5bf5592027d112fe8b19c92eb906add424c46507
Reviewed-on: https://go-review.googlesource.com/c/go/+/351855
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
In markType() in crawler.go, mark the type of a unexported field if it
is a fully-instantiated type, since we create and instantiate the
methods of any fully-instantiated type that we see during import. As
before, we still do not mark the type of an unexported field if that
type is not generic. Fixes#48454 and most recent issue described in
48337. The included test is similar to the case in 48454.
Fixes#48454Fixes#48337
Change-Id: I77a2a62b9e2647876facfa6f004201e8f699c905
Reviewed-on: https://go-review.googlesource.com/c/go/+/351315
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Instructions with immediates can be precomputed when operating on a
constant - do so for SLTI/SLTIU, SLLI/SRLI/SRAI, NEG/NEGW, ANDI, ORI
and ADDI. Additionally, optimise ANDI and ORI when the immediate is
all ones or all zeroes.
In particular, the RISCV64 logical left and right shift rules
(Lsh*x*/Rsh*Ux*) produce sequences that check if the shift amount
exceeds 64 and if so returns zero. When the shift amount is a
constant we can precompute and eliminate the filter entirely.
Likewise the arithmetic right shift rules produce sequences that
check if the shift amount exceeds 64 and if so, ensures that the
lower six bits of the shift are all ones. When the shift amount
is a constant we can precompute the shift value.
Arithmetic right shift sequences like:
117fc: 00100513 li a0,1
11800: 04053593 sltiu a1,a0,64
11804: fff58593 addi a1,a1,-1
11808: 0015e593 ori a1,a1,1
1180c: 40b45433 sra s0,s0,a1
Are now a single srai instruction:
117fc: 40145413 srai s0,s0,0x1
Likewise for logical left shift (and logical right shift):
1d560: 01100413 li s0,17
1d564: 04043413 sltiu s0,s0,64
1d568: 40800433 neg s0,s0
1d56c: 01131493 slli s1,t1,0x11
1d570: 0084f433 and s0,s1,s0
Which are now a single slli (or srli) instruction:
1d120: 01131413 slli s0,t1,0x11
This removes more than 30,000 instructions from the Go binary and
should improve performance in a variety of areas - of note
runtime.makemap_small drops from 48 to 36 instructions. Similar
gains exist in at least other parts of runtime and math/bits.
Change-Id: I33f6f3d1fd36d9ff1bda706997162bfe4bb859b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/350689
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Michael Munday <mike.munday@lowrisc.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Add tests for shift by constant, masked shifts and bounded shifts. While here,
sort tests by architecture and keep order of tests consistent (lsh, rshU, rsh).
Change-Id: I512d64196f34df9cb2884e8c0f6adcf9dd88b0fc
Reviewed-on: https://go-review.googlesource.com/c/go/+/351289
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Michael Munday <mike.munday@lowrisc.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
For #33232.
Change-Id: Id95a92bfdad91e3ccde9f5654c3b1b02ca95f6ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/351731
Trust: Robert Griesemer <gri@golang.org>
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Agressively mark all LHS variables in assignments as used if there
is any error in the (entire) assignment. This reduces the number of
spurious "declared but not used" errors in programs that are invalid
in the first place. This behavior is closer to the behavior of the
compiler's original type checker (types1) and lets us remove lines
of the form "_ = variable" just to satisfy test cases. It also makes
more important errors visible by not crowding them out.
Remove the Checker.useLHS function and use Checker.use instead:
useLHS didn't evaluate top-level variables, but we actually want
them to be evaluated in an error scenario so that they are getting
used (and thus we don't get the "declared but not used" error).
Fixes#42937.
Change-Id: Idda460f6b81c66735bf9fd597c54188949bf12b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/351730
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
When used with the compiler, types2 will report assignment error
messages that closely match what the compiler type checker (types1)
produces.
Also, mark lhs variables as used in invalid variable initializations
to avoid a class of follow-on errors.
Fixes#48558.
Change-Id: I92d1de006c66b3a2364bb1bea773a312963afe75
Reviewed-on: https://go-review.googlesource.com/c/go/+/351669
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Like other builtin functions, unsafe.Add's len operand is allowed to
be variable sized. However, unlike other builtins, it doesn't get
lowered to a runtime function call, so we never end up coercing it to
a specific type. As a result, we could end up constructing an OpAddPtr
value but with a less-than-ptr-sized addend operand.
This CL fixes this by always coercing the second operand to uintptr
during SSA construction.
Theoretically, we could do this during walk instead, but the frontend
doesn't allow converting negative constants to uintptr.
Fixes#48536.
Change-Id: Ib0619ea79df58b256b250fec967a6d3c8afea631
Reviewed-on: https://go-review.googlesource.com/c/go/+/351592
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Adjust types2 and go/types and some test cases.
Because `any` is not treated specially anymore in constraint
position we get additional errors in constraints if `any` is
used before Go1.18 (in addition to the error that type parameter
lists are not permitted before Go1.18).
Fixes#33232.
Change-Id: I85590c6094b07c3e494fef319e3a38d0217cf6f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/351456
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
BMI1 includes four instructions (ANDN, BLSI, BLSMSK, BLSR) that are
easy to peephole optimize, and which GCC always seems to favor using
when available and applicable.
Updates #45453.
Change-Id: I0274184057058f5c579e5bc3ea9c414396d3cf46
Reviewed-on: https://go-review.googlesource.com/c/go/+/351130
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
xml names can't have any of '[],' in them, which might appear in
generic type names. Truncate at the first '[' so the names are still valid.
Fixes#48318
Change-Id: I110ff4269f763089467e7cf84b0f0c5075fb44b7
Reviewed-on: https://go-review.googlesource.com/c/go/+/349349
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
When going to dictionary formats derived from the function
instantiations, I had broken out noder.Assignop() to deal specially with
shape types, but didn't quite get the tricky case right. We still need
to allow conversion between shape types, but if the destination is an
interface, we need to use CONVIFACE rather than CONVNOP.
Fixes#48453.
Change-Id: I8c4b39c2e628172ac34f493f1dd682cbac1e55ae
Reviewed-on: https://go-review.googlesource.com/c/go/+/350949
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Ensure constant shift amounts are in the range [0-31]. When shift amounts
are out of range, bad things happen. Shift amounts out of range occur
when lowering 64-bit shifts (we take an in-range shift s in [0-63] and
calculate s-32 and 32-s, both of which might be out of [0-31]).
The constant shift operations themselves still work, but their shift
amounts get copied unmolested to operations like ORshiftLL which use only
the low 5 bits. That changes an operation like <<100 which unconditionally
produces 0, to <<4, which doesn't.
Fixes#48476
Change-Id: I87363ef2b4ceaf3b2e316426064626efdfbb8ee3
Reviewed-on: https://go-review.googlesource.com/c/go/+/350969
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
As with other recent issues, the Init field of a range loop was not
being handled properly. Generally, it is much better to explicitly
import/export the Init statements, else they are incorrectly added
before the associated node, rather than as the Init value of the node.
This was causing labels to not be correctly added to the range loop that
it is immediately preceding.
Made the ORANGE handling completely similar to the OFOR handling.
Fixes#48462
Change-Id: I999530e84f9357f81deaa3dda50660061f710e7c
Reviewed-on: https://go-review.googlesource.com/c/go/+/350911
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
CL 342350 fixed panic with dead hidden closures, by marking discarded
hidden closure as dead, and won't compile them. However, the fix is
incomplete. In case the "if" or "else" block end with panic or return
statement:
if true { return }
# All nodes starts from here are dead
the dead nodes must be processed with markHiddenClosureDead, but they
are not, causing the compiler crashes.
This CL adds that missing part.
Fixes#48459
Change-Id: Ibdd10a61fc6459d139bbf4a66b0893b523ac6b67
Reviewed-on: https://go-review.googlesource.com/c/go/+/350695
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This also requires that we sometimes delay transformSelect(), if the
assignments in the Comm part of the select have not been transformed.
Fixes#48137
Change-Id: I163aa1f999d1e63616280dca807561b12b2aa779
Reviewed-on: https://go-review.googlesource.com/c/go/+/347915
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For certain type of method wrappers we used to generate a tail
call. That was disabled in CL 307234 when register ABI is used,
because with the current IR it was difficult to generate a tail
call with the arguments in the right places. The problem was that
the IR does not contain a CALL-like node with arguments; instead,
it contains an OAS node that adjusts the receiver, than an
OTAILCALL node that just contains the target, but no argument
(with the assumption that the OAS node will put the adjusted
receiver in the right place). With register ABI, putting
arguments in registers are done in SSA. The assignment (OAS)
doesn't put the receiver in register.
This CL changes the IR of a tail call to take an actual OCALL
node. Specifically, a tail call is represented as
OTAILCALL (OCALL target args...)
This way, the call target and args are connected through the OCALL
node. So the call can be analyzed in SSA and the args can be passed
in the right places.
(Alternatively, we could have OTAILCALL node directly take the
target and the args, without the OCALL node. Using an OCALL node is
convenient as there are existing code that processes OCALL nodes
which do not need to be changed. Also, a tail call is similar to
ORETURN (OCALL target args...), except it doesn't preserve the
frame. I did the former but I'm open to change.)
The SSA representation is similar. Previously, the IR lowers to
a Store the receiver then a BlockRetJmp which jumps to the target
(without putting the arg in register). Now we use a TailCall op,
which takes the target and the args. The call expansion pass and
the register allocator handles TailCall pretty much like a
StaticCall, and it will do the right ABI analysis and put the args
in the right places. (Args other than the receiver are already in
the right places. For register args it generates no code for them.
For stack args currently it generates a self copy. I'll work on
optimize that out.) BlockRetJmp is still used, signaling it is a
tail call. The actual call is made in the TailCall op so
BlockRetJmp generates no code (we could use BlockExit if we like).
This slightly reduces binary size:
old new
cmd/go 14003088 13953936
cmd/link 6275552 6271456
Change-Id: I2d16d8d419fe1f17554916d317427383e17e27f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/350145
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
There are a bunch of nodes beside ONAME and OTYPE, (such as OSTRUCTLIT
and OCOMPLIT) which can introduce a generic type that we need to mark.
So, just mark any generic type on any node in markInlBody. In this
particular issue, the type is introduced by an OSTRUCTLIT node.
Updates #48337
Change-Id: I271932518f0c1fb54d91a603e01a855c69df631d
Reviewed-on: https://go-review.googlesource.com/c/go/+/349909
Trust: Dan Scales <danscales@google.com>
Trust: Carlos Amedee <carlos@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is caused by some nodes didn't carry the real line number.
Noder1 wraps these node with ir.ParenExpr. To fix this issue,
wraps this node like what noder1 does.
Change-Id: I212cad09b93b8bf1a7adfad416d229d15711918a
Reviewed-on: https://go-review.googlesource.com/c/go/+/349769
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Keith Randall <khr@golang.org>
The variable represents the microarchitecture level for which to compile.
Valid values are v1 (default), v2, v3, v4.
Updates #45453
Change-Id: I095197fc9239d79f98896d7e745e2341354daca4
GitHub-Last-Rev: f83ed17204
GitHub-Pull-Request: golang/go#48359
Reviewed-on: https://go-review.googlesource.com/c/go/+/349595
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Bryan C. Mills <bcmills@google.com>
Move ShapePkg to types, and change types.NewNamed to automatically set
IsShape/HasShape if a type is in the shapes pkg. This means that
imported shape types will automatically have the correct
IsShape/HasShape flags, even though we are not explicitly
exporting/importing those flags.
Updates #48337
Change-Id: I8b6131a663205f73f395943c9d0c8bdb2a213401
Reviewed-on: https://go-review.googlesource.com/c/go/+/349869
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
This is a port of CL 349009 to typecheck importer.
Fixes#48306
Change-Id: Iec3f078089346bd85f0ab739896e079940325011
Reviewed-on: https://go-review.googlesource.com/c/go/+/349011
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
The importReader always reads type parameter before declaring type stub
declaration. Thus, for recursive type, the type parameter is going to be
read twice, cause the bound more than once error.
To fix this, only read the type parameter after declaring stub obj, thus
r.doDecl can see the type was already inserted and terminate the
recursive call earlier.
Fixes#48280
Change-Id: I272e2f214f739fb8ec71a8628ba297477e1b7755
Reviewed-on: https://go-review.googlesource.com/c/go/+/349009
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Fixes#48317
Change-Id: I756ae6253022870071004332dd8f49169307f7e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/349013
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
CL 345486 introduced an optimization to reflect's map accesses
which is not quite correct. We can't use the optimized code if the
value type is >128 bytes.
See cmd/compile/internal/walk/walk.go:mapfast
Fixes#48357
Change-Id: I8e3c7858693083dd4393a8de48ca5fa47bab66f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/349593
Trust: Keith Randall <khr@golang.org>
Trust: Joe Tsai <joetsai@digital-static.net>
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Trust: Martin Möhrmann <martin@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Run-TryBot: Joe Tsai <joetsai@digital-static.net>
Reviewed-by: Joe Tsai <joetsai@digital-static.net>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Martin Möhrmann <martin@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Also, add the FABSS and FABSD pseudo instructions to the assembler.
The compiler could use FSGNJX[SD] directly but there doesn't seem
to be much advantage to doing so and the pseudo instructions are
easier to understand.
Change-Id: Ie8825b8aa8773c69cc4f07a32ef04abf4061d80d
Reviewed-on: https://go-review.googlesource.com/c/go/+/348989
Trust: Michael Munday <mike.munday@lowrisc.org>
Run-TryBot: Michael Munday <mike.munday@lowrisc.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Joel Sing <joel@sing.id.au>
In some rewrite rules for arm64 bitfield optimizations, the
bitfield lsb value and the bitfield width value are related
to datasize, some of them use datasize directly to check the
bitfield lsb value is valid, to get the bitfiled width value,
but some of them call isARM64BFMask() and arm64BFWidth()
functions. In order to be consistent, this patch changes them
all to use datasize.
Besides, this patch sorts the codegen test cases.
Run the "toolstash-check -all" command and find one inconsistent code
is as the following.
new: src/math/fma.go:104 BEQ 247
master: src/math/fma.go:104 BEQ 248
The above inconsistence is due to this patch changing the range of the
field lsb value in "UBFIZ" optimization rules from "lc+(32|16|8)<64" to
"lc<64", so that the following code is generated as "UBFIZ". The logical
of changed code is still correct.
The code of src/math/fma.go:160:
const uvinf = 0x7FF0000000000000
func FMA(a, b uint32) float64 {
ps := a+b
return Float64frombits(uint64(ps)<<63 | uvinf)
}
The new assembly code:
TEXT "".FMA(SB), LEAF|NOFRAME|ABIInternal, $0-16
MOVWU "".a(FP), R0
MOVWU "".b+4(FP), R1
ADD R1, R0, R0
UBFIZ $63, R0, $1, R0
ORR $9218868437227405312, R0, R0
MOVD R0, "".~r2+8(FP)
RET (R30)
The master assembly code:
TEXT "".FMA(SB), LEAF|NOFRAME|ABIInternal, $0-16
MOVWU "".a(FP), R0
MOVWU "".b+4(FP), R1
ADD R1, R0, R0
MOVWU R0, R0
LSL $63, R0, R0
ORR $9218868437227405312, R0, R0
MOVD R0, "".~r2+8(FP)
RET (R30)
Change-Id: I9061104adfdfd3384d0525327ae1e5c8b0df5c35
Reviewed-on: https://go-review.googlesource.com/c/go/+/265038
Trust: fannie zhang <Fannie.Zhang@arm.com>
Run-TryBot: fannie zhang <Fannie.Zhang@arm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
For #48301.
Change-Id: Ie5f57dcce86773c06c5140abf13a6cfff79eb323
Reviewed-on: https://go-review.googlesource.com/c/go/+/348743
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Add a missing nil check in the formatting code for expression
nodes. Matches the nil checks in the same code.
Fixes#48301.
Change-Id: Ia9bfd3535254a94996ee190b544d95e15433d252
Reviewed-on: https://go-review.googlesource.com/c/go/+/348740
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If closure in a global assignment and has a method receiver.
We should assign receiver as a global variable, not a local variable.
Fixes#48225
Change-Id: I8f65dd6e8baf66a5eff24028d28ad0a594091add
Reviewed-on: https://go-review.googlesource.com/c/go/+/348512
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
gri@ reports that types2 now correctly handles when type parameters
recursively refer back to the parameterized type, so we might as well
add tests to exercise that. Unified IR also correctly handles
importing and exporting these types, but -G=3 currently does not.
Updates #46461.
Change-Id: I272102aa08c40c980b9aeeca9f834291dfbbcc3e
Reviewed-on: https://go-review.googlesource.com/c/go/+/348738
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
When an OAS node is converted to an OSELRECV2 node in tcSelect(), the
possible DCL node in the Init field was being dropped, since a
completely new node was being created and the Init field was not set. I
don't expect n.Init() to be set for the ORECV case, but the code now
deals with that too.
Fixed bug in both tcSelect() and transformSelect().
Fixes#48289
Change-Id: I09918a70f7cbaa4aa9a17546169f908a8787df15
Reviewed-on: https://go-review.googlesource.com/c/go/+/348569
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
A generic conversion might be required for when converting T->interface{}.
When stenciled with T=interface{}, then that conversion doesn't need
to do anything.
Fixes#48276
Change-Id: Ife65d01c99fbd0895cb7eec79df9e93e752b1fa5
Reviewed-on: https://go-review.googlesource.com/c/go/+/348736
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
run.go has logic for being able to run tests with various -G flags,
but not all test types (in particular, "asmcheck" tests) support
configuring non-default -G levels. The intention was that these tests
would continue running in the default mode (at the time -G=0), but at
some point it seems like we accidentally disabled them all
together (if it ever worked correctly in the first place).
Fixes#48247.
Change-Id: I13917cb0012cbe522d29b23b888de6136872ead4
Reviewed-on: https://go-review.googlesource.com/c/go/+/348671
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@lowrisc.org>
CL 347529 broke the longtest builders due to missing -G=3 flag when
compiling the added test.
Change-Id: I73007801dd6871a8cf3554e957d247f5f56fd641
Reviewed-on: https://go-review.googlesource.com/c/go/+/348330
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
When reading body of inlining function, which has another inlined
function in the body, the reader still add this inlined function to
todoBodies, which it shouldn't because the inlined function was read
already.
To fix this, introduce new flag to signal that we are done construting
all functions in todoBodies, thus the addBody shouldn't add anything
to todoBodies then.
Updates #48094
Change-Id: I45105dd518f0a7b69c6dcbaf23b957623f271203
Reviewed-on: https://go-review.googlesource.com/c/go/+/347529
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In case of embedded field, if the receiver was fully instantiated, we
must use its instantiated type, instead of passing the type params of
the base receiver.
Fixes#47797Fixes#48253
Change-Id: I97613e7e669a72605137e82406f7bf5fbb629378
Reviewed-on: https://go-review.googlesource.com/c/go/+/348549
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
The codegen tests are currently skipped (see #48247). The test
added in CL 346050 did not compile because it was in the main
package but did not contain a main function. Changing the package
to 'codegen' fixes the issue.
Updates #48247.
Change-Id: I0a0eaca8e6a7d7b335606d2c76a204ac0c12e6d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/348392
Trust: Michael Munday <mike.munday@lowrisc.org>
Run-TryBot: Michael Munday <mike.munday@lowrisc.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The codegen tests are currently skipped (see #48247) and the
bitfield tests do not actually compile due to a duplicate function
name (sbfiz5) added in CL 267602. Renaming the function fixes the
issue.
Updates #48247.
Change-Id: I626fd5ef13732dc358e73ace9ddcc4cbb6ae5b21
Reviewed-on: https://go-review.googlesource.com/c/go/+/348391
Trust: Michael Munday <mike.munday@lowrisc.org>
Run-TryBot: Michael Munday <mike.munday@lowrisc.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This test is not executed by default (see #48247) and does not
actually pass. It was added in CL 346689. The code generation
changes made in that CL only change how instructions are assembled,
they do not actually affect the output of the compiler. This test
is unfortunately therefore invalid and will never pass.
Updates #48247.
Change-Id: I0c807e4a111336e5a097fe4e3af2805f9932a87f
Reviewed-on: https://go-review.googlesource.com/c/go/+/348390
Trust: Michael Munday <mike.munday@lowrisc.org>
Run-TryBot: Michael Munday <mike.munday@lowrisc.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Added new function earlyTransformAssign() to add needed CONVIFACE nodes
due to assignments in generic functions.
Fixes#48049
Change-Id: I7cd9cee6ecf34ed2ef0743d1b17645b9f520fa00
Reviewed-on: https://go-review.googlesource.com/c/go/+/347914
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We had code in NewPtr() to set the HasTParam/HasShape flag as needed for
the cached ptr element if it wasn't set correctly based on its Elem.
This was causing the race mentioned in the issue.
But that setting code is no longer needed, as long as we call
SetRParams() soon after calling NewIncompleteNamedType(), before
creating/translating the underlying type (which we do). The
HasTParam/HasShape attribute can only come from setting of rparams or a
direct typeparam/shape somewhere in the underlying type, both of which
don't depend on recursion, etc. (as long as the rparams are set early).
Added a check that HasTParam/HasShape are set correctly for the cached
pointer/slice elems in NewPtr() and NewSlice().
Fixes#48191
Change-Id: Ide7d82efb77ae97901e75b2e6c65bd1bfc25e0ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/348089
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We should be putting a newly instantiated imported type in
Instantiate/doInst onto the instTypeList, so its methods/dictionaries
are instantiated. To do this, we needed a more general way to add a
type to instTypeList, so add NeedInstType(), analogous to
NeedRuntimeType(). This has the extra advantage that now all types
created by the type substituter are added to instTypeList without any
extra code, which was easy to forget. doInst() now correctly calls
NeedInstType().
This is a bit aggressive, since a fully instantiated type in a generic
function/method may never be used, if the generic method is never
instantiated in the local package. But it should be fairly uncommon for
a generic method to mention a fully instantiated type (but it does
happen in this bug).
Fixes both cases mentioned in the bug.
Fixed#48185
Change-Id: I19b5012dfac17e306c8005f8595a648b0ab280d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/347909
Trust: Dan Scales <danscales@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For lazy import resolution, there's reentrancy issue with (*Named).load
method, when "t.resolve(t)" can lead us to the same named type, thus
(*Named).load is called recursively, causing the deadlock.
The main problem is that when instantinate a type, we calculate the type
hashing, including TParams. Calling t.TParams().Len() triggers the
reentrancy call to "(*Named).load".
To fix this, just not checking TParams().Len() if we are hashing.
Updates #48185
Change-Id: Ie34842d7b10fad5d11fbcf75bb1c64a89deac6b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/347534
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
The most common cases:
len(s) > 0
len(s) < 1
and they can be simplified to:
len(s) != 0
len(s) == 0
Fixes#48054
Change-Id: I16e5b0cffcfab62a4acc2a09977a6cd3543dd000
Reviewed-on: https://go-review.googlesource.com/c/go/+/346050
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Now we have two functions that create names for instantiated types.
They are inconsistent when dealing with byte/rune type.
This CL makes instTypeName2 reuse the code of typecheck.InstTypeName
Fixes#48198
Change-Id: I4c216b532cba6618ef9b63fd0b76e8f1c0ed7a75
Reviewed-on: https://go-review.googlesource.com/c/go/+/347491
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This patch adds some rules to rewrite "(LeftShift (SignExtend x) lc)"
expression as "SBFIZ".
Add the test cases.
Change-Id: I294c4ba09712eeb02c7a952447bb006780f1e60d
Reviewed-on: https://go-review.googlesource.com/c/go/+/267602
Trust: fannie zhang <Fannie.Zhang@arm.com>
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: fannie zhang <Fannie.Zhang@arm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The UBFX and SBFX already zero/sign extend the result. Further
zero/sign extensions are thus unnecessary as long as they leave
the top bits unaltered. This patch absorbs zero/sign extensions
into UBFX/SBFX.
Add the related test cases.
Change-Id: I7c4516c8b52d677f77bf3aaedab87c4a28056ec0
Reviewed-on: https://go-review.googlesource.com/c/go/+/265039
Trust: fannie zhang <Fannie.Zhang@arm.com>
Trust: Keith Randall <khr@golang.org>
Run-TryBot: fannie zhang <Fannie.Zhang@arm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
-G=0 is in maintenance mode, so limit testing it to the longtest
builders.
Change-Id: Ie8a01866b506183d0201f2a3730377cfa663da80
Reviewed-on: https://go-review.googlesource.com/c/go/+/347298
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This CL simplifies riscv addition (add r, imm) to
(ADDI (ADDI r, imm/2), imm-imm/2) if imm is in specific ranges.
(-4096 <= imm <= -2049 or 2048 <= imm <= 4094)
There is little impact to the go1 benchmark, while the total
size of pkg/linux_riscv64 decreased by about 11KB.
Change-Id: I236eb8af3b83bb35ce9c0b318fc1d235e8ab9a4e
GitHub-Last-Rev: a2f56a0763
GitHub-Pull-Request: golang/go#48110
Reviewed-on: https://go-review.googlesource.com/c/go/+/346689
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Michael Munday <mike.munday@lowrisc.org>
ORANGE is still not inlineable now. This CL is correct only when the range statement is statically dead, and thus not counted during the inline budget check.
If we support range statements in inlining closures in the future, may require additional processing.
Fixes#48033.
Change-Id: I28f5755c28cfa27e41daef9eff2ae332059909bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/345436
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, if a test explicitly specify -G flag, if that flag conflict
with compiler default -G flag, the test will be skipped. That's the
reason CL 346469 haven't fixed the unified IR stuff, but still make the
unified builder passed.
This CL makes run.go always run the test in unified IR mode, regardless
of the explicit -G flag specified.
Updates #48094
Change-Id: I959ecaff6aca07844f0ffcf36caa60cf0747e8ce
Reviewed-on: https://go-review.googlesource.com/c/go/+/347271
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Add (temporary) syntax.AllowTypeLists mode to control the
acceptance of type lists; the compiler doesn't set it,
but existing syntax and types2 tests do so that the code
remains exercised while it exists.
Adjust various tests to use the type set notation.
Change-Id: I798e607912552db6bfe38a7cd4324b74c6bf4d95
Reviewed-on: https://go-review.googlesource.com/c/go/+/347249
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Add support to the assembler for F[N]M{ADD,SUB}[SD] instructions.
Argument order is:
OP RS1, RS2, RS3, RD
Also, add support for the FMA intrinsic to the compiler. Automatic
FMA matching is left to a future CL.
Change-Id: I47166c7393b2ab6bfc2e42aa8c1a8997c3a071b3
Reviewed-on: https://go-review.googlesource.com/c/go/+/293030
Trust: Michael Munday <mike.munday@lowrisc.org>
Run-TryBot: Michael Munday <mike.munday@lowrisc.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Joel Sing <joel@sing.id.au>
In -G=3 mode, irgen use its own generated IR, which is mis-handling of
bodyless function and declared function with //go:noescape pragma.
Fix this by adopting the same logic in noder.funcDecl, which minor
change in linkname detection.
Fixes#48097
Change-Id: Ibef921c1f75e071ca61685e0cb4543f2ee5efc7f
Reviewed-on: https://go-review.googlesource.com/c/go/+/346470
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If the TypeParam has all the methods of an interface, allow conversions from TypeParam to interface
Fixes#47708
Change-Id: I40a82a31f6ea9354130dbe3bcfc83537094bf12c
Reviewed-on: https://go-review.googlesource.com/c/go/+/342509
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Keith Randall <khr@golang.org>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Missing case types.TUNSAFEPTR in parameterizedBy().
Also realized there was the same missing case in the type substituter
(*Tsubster).Typ().
Fixes#48103
Change-Id: If71f1a6ef80932f0e2120d4c18b39a30189fd8fe
Reviewed-on: https://go-review.googlesource.com/c/go/+/346669
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
CL 309831 fixed importing of method expressions, by re-using the same
code already have for ODOTMETH. But that code does not work with
embedded field.
To fix this, we need to calculate all methods of the receiver base type
of method expression, before looking up the selection.
Fixes#48088
Change-Id: Ia244d36a3ed0f989735eb57becdfa70a81912f57
Reviewed-on: https://go-review.googlesource.com/c/go/+/346489
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
type A [0]int
var a A
x := a[i]
Use the zero value for x instead of the "impossible" value. That lets
us at least compile code like this with -B, even though it can't
possibly run correctly.
Fixes#48092
Change-Id: Idad5cfab49e05f375c069b05addceed68a15299f
Reviewed-on: https://go-review.googlesource.com/c/go/+/346589
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
When the Defn field of a name node is not an ONAME (for a closure
variable), then it points to a body node of the same function/closure.
Therefore, we should not attempt to substitute it at the time we are
substituting the local variables. Instead, we remember a mapping from the
Defn node to the nodes that reference it, and update the Defn fields of
the copied name nodes at the time that we create the new copy of the
Defn node.
Added some comments to the Defn field of ir.Name.
Moved the Defn (and Outer code, for consistency) from namelist() to
localvar(), since Defn needs to updated for all local variables, not
just those in a closure. Fixed case where .Defn was not being set
properly in noder2 for type switches. Fixed another case where the Defn
field had to be updated during transformSelect() because the Defn node
was being completely changed to a new node.
Fixed some spacing in typeswitch2.go
Fixes#47676Fixes#48016
Change-Id: Iae70dd76575f4a647c1db79e1eba9bbe44bfc226
Reviewed-on: https://go-review.googlesource.com/c/go/+/346290
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Now that unsafe.Sizeof and friends can operate on generic parameters,
and evaluate to non-constants, we need to export/import them correctly.
Fixes#48094
Change-Id: If3ebf77255385cd5462e13fb7ced8b157ba3cf5b
Reviewed-on: https://go-review.googlesource.com/c/go/+/346469
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The existing approach (alias name stands for generic type name)
is an exception: it's the only place where a generic type could
be used without explicit instantiation. The correct solution is
currently under discussion (see proposal issue #46477).
This CL requires that the RHS of an alias type declaration be
an instantiated non-generic type. If #46477 is accepted, the
implementation will require proper representation of alias
types.
Change-Id: Ie85b923213a64f39837e56e38e14757458272b93
Reviewed-on: https://go-review.googlesource.com/c/go/+/346294
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
We were using the type from the wrong Node (the partially filled-in
FUNCINST) rather than the original function node - which is pointed to
by the OFUNCINST)) to set the final fully-substituted type of the
OFUNCINST. So fixed the node reference. Also, added check so we don't do
any work at all if the OFUNCINST already has all type args filled in.
Added few extra cases to the test file issue48030.go, to cover
fully-specified type args, partially inferred type args, and fully
inferred type args.
Fixes#48030
Change-Id: If9e4f2e0514d68b9d241f30c423259133932b25b
Reviewed-on: https://go-review.googlesource.com/c/go/+/346229
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Fixes#48056
Change-Id: I13ca4caadbabf02084f66ab28b4cf0c4a3705370
Reviewed-on: https://go-review.googlesource.com/c/go/+/346049
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This issue has been fixed in https://golang.org/cl/345411Fixes: #47892
Change-Id: I13dd3814650913da065e5f24a0c61d30adb0633a
Reviewed-on: https://go-review.googlesource.com/c/go/+/345229
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Trust: Keith Randall <khr@golang.org>
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
storeOneLoad decompose Load that is then stored, the offset value must
be created on the same block with the Load to be dominated, otherwise,
it's unsafe if one does not dominate the other.
Fixes#48026
Change-Id: Iee5e6c5d3e1b09862afe4e65f7bcd771b4c57367
Reviewed-on: https://go-review.googlesource.com/c/go/+/345434
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Support 'type C comparable' properly by using the same logic as for
'type T error', since ErrorType and ComparableType are entirely
analogous.
Added support for 'any' type as well, as requested by Robert. (For the
future - we can't currently have 'any' anywhere other than in a
constraint.)
Fixes#47966
Change-Id: I68bd284ced9a8bfca7d2339cd576f3cb909b1b83
Reviewed-on: https://go-review.googlesource.com/c/go/+/345174
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
