Normally, a panic/throw only shows the thread stack for the current thread
and all paused goroutines. Goroutines running on other threads, or other threads
running on their system stacks, are opaque. Change that when GODEBUG=crash,
by passing a SIGQUIT around to all the threads when GODEBUG=crash.
If this works out reasonably well, we might make the SIGQUIT relay part of
the standard panic/throw death, perhaps eliding idle m's.
Change-Id: If7dd354f7f3a6e326d17c254afcf4f7681af2f8b
Reviewed-on: https://go-review.googlesource.com/2811
Reviewed-by: Rick Hudson <rlh@golang.org>
There is a small possibility that runtime deadlocks when netpoll is just activated.
Consider the following scenario:
GOMAXPROCS=1
epfd=-1 (netpoll is not activated yet)
A thread is in findrunnable, sets sched.lastpoll=0, calls netpoll(true),
which returns nil. Now the thread is descheduled for some time.
Then sysmon retakes a P from syscall and calls handoffp.
The "If this is the last running P and nobody is polling network" check in handoffp fails,
since the first thread set sched.lastpoll=0. So handoffp decides that there is already
a thread that polls network and so it calls pidleput.
Now the first thread is scheduled again, finds no work and calls stopm.
There is no thread that polls network and so checkdead reports deadlock.
To fix this, don't set sched.lastpoll=0 when netpoll is not activated.
The deadlock can happen if cgo is disabled (-tag=netgo) and only on program startup
(when netpoll is just activated).
The test is from issue 5216 that lead to addition of the
"If this is the last running P and nobody is polling network" check in handoffp.
Update issue 9576.
Change-Id: I9405f627a4d37bd6b99d5670d4328744aeebfc7a
Reviewed-on: https://go-review.googlesource.com/2750
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The old name was too ambiguous (is it a verb? is it a predicate? is
it a constant?) and too close to debug.gccheckmark. Hopefully the new
name conveys that this variable indicates that we are currently doing
mark checking.
Change-Id: I031cd48b0906cdc7774f5395281d3aeeb8ef3ec9
Reviewed-on: https://go-review.googlesource.com/2656
Reviewed-by: Rick Hudson <rlh@golang.org>
1) Move non-preemption check even earlier in newstack.
This avoids a few priority inversion problems.
2) Always use atomic operations to update bitmap for 1-word objects.
This avoids lost mark bits during concurrent GC.
3) Stop using work.nproc == 1 as a signal for being single-threaded.
The concurrent GC runs with work.nproc == 1 but other procs are
running mutator code.
The use of work.nproc == 1 in getfull *is* safe, but remove it anyway,
since it is saving only a single atomic operation per GC round.
Fixes#9225.
Change-Id: I24134f100ad592ea8cb59efb6a54f5a1311093dc
Reviewed-on: https://go-review.googlesource.com/2745
Reviewed-by: Rick Hudson <rlh@golang.org>
Generated from a script using go vet then read by a human.
Change-Id: Ie5f7ab3a1075a9c8defbf5f827a8658e3eb55cab
Reviewed-on: https://go-review.googlesource.com/2746
Reviewed-by: Ian Lance Taylor <iant@golang.org>
https://go-review.googlesource.com/#/c/1876/ introduced a new
TestClipWithNilMP test, along with a code change that fixed a panic,
but the existing TestClip test already contained almost enough machinery
to cover that bug.
There is a small code change in this CL, but it is a no-op: (*x).y is
equivalent to x.y for a pointer-typed x, but the latter is cleaner.
Change-Id: I79cf6952a4999bc4b91f0a8ec500acb108106e56
Reviewed-on: https://go-review.googlesource.com/2304
Reviewed-by: Dave Cheney <dave@cheney.net>
Make auxv parsing in linux/arm less of a special case.
* rename setup_auxv to sysargs
* exclude linux/arm from vdso_none.go
* move runtime.checkarm after runtime.sysargs so arm specific
values are properly initialised
Change-Id: I1ca7f5844ad5a162337ff061a83933fc9a2b5ff6
Reviewed-on: https://go-review.googlesource.com/2681
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fix SmartOS build that was broken in 682922908f.
SmartOS pretends to be Ubuntu/Debian with respect to its SSL
certificate location.
Change-Id: I5405c6472c8a1e812e472e7301bf6084c17549d6
Reviewed-on: https://go-review.googlesource.com/2704
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For some cases we can ensure the correct order of elements in two
instead of three comparisons. It is unnecessary to compare m0 and
m1 again if m2 and m1 are not swapped.
benchmark old ns/op new ns/op delta
BenchmarkSortString1K 302721 299590 -1.03%
BenchmarkSortInt1K 124055 123215 -0.68%
BenchmarkSortInt64K 12291522 12203402 -0.72%
BenchmarkSort1e2 58027 57111 -1.58%
BenchmarkSort1e4 12426805 12341761 -0.68%
BenchmarkSort1e6 1966250030 1960557883 -0.29%
Change-Id: I2b17ff8dee310ec9ab92a6f569a95932538768a9
Reviewed-on: https://go-review.googlesource.com/2614
Reviewed-by: Robert Griesemer <gri@golang.org>
In the previous sandbox implementation we read all sandboxed output
from standard output, and so all fake time writes were made to
standard output. Now we have a more sophisticated sandbox server
(see golang.org/x/playground/sandbox) that is capable of recording
both standard output and standard error, so allow fake time writes to
go to either file descriptor.
Change-Id: I79737deb06fd8e0f28910f21f41bd3dc1726781e
Reviewed-on: https://go-review.googlesource.com/2713
Reviewed-by: Minux Ma <minux@golang.org>
Skip the allocation testing (which was only used as a signal for
whether the interface was implemented by ResponseWriter), and just
test for it directly.
Fixes#9575
Change-Id: Ie230f1d21b104537d5647e9c900a81509d692469
Reviewed-on: https://go-review.googlesource.com/2720
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
RFC5280 states:
"This optional field describes the version of the encoded CRL. When
extensions are used, as required by this profile, this field MUST be
present and MUST specify version 2 (the integer value is 1)."
This CL has been discussed at: http://golang.org/cl/172560043
Change-Id: I8a72d7593d5ca6714abe9abd6a37437c3b69ab0f
Reviewed-on: https://go-review.googlesource.com/2259
Reviewed-by: Adam Langley <agl@golang.org>
And add names for the curve implemented in crypto/elliptic.
This permits a safer alternative to switching on BitSize
for code that implements curve-dependent cryptosystems.
(E.g., ECDSA on P-xxx curves with the matched SHA-2
instances.)
Change-Id: I653c8f47506648028a99a96ebdff8389b2a95fc1
Reviewed-on: https://go-review.googlesource.com/2133
Reviewed-by: Adam Langley <agl@golang.org>
According to RFC4055 a NULL parameter MUST be present in the signature
algorithm. This patch adds the NULL value to the Signature Algorithm
parameters in the signingParamsForPrivateKey function for RSA based keys.
Section 2.1 states:
"There are two possible encodings for the AlgorithmIdentifier
parameters field associated with these object identifiers. The two
alternatives arise from the loss of the OPTIONAL associated with the
algorithm identifier parameters when the 1988 syntax for
AlgorithmIdentifier was translated into the 1997 syntax. Later the
OPTIONAL was recovered via a defect report, but by then many people
thought that algorithm parameters were mandatory. Because of this
history some implementations encode parameters as a NULL element
while others omit them entirely. The correct encoding is to omit the
parameters field; however, when RSASSA-PSS and RSAES-OAEP were
defined, it was done using the NULL parameters rather than absent
parameters.
All implementations MUST accept both NULL and absent parameters as
legal and equivalent encodings.
To be clear, the following algorithm identifiers are used when a NULL
parameter MUST be present:
sha1Identifier AlgorithmIdentifier ::= { id-sha1, NULL }
sha224Identifier AlgorithmIdentifier ::= { id-sha224, NULL }
sha256Identifier AlgorithmIdentifier ::= { id-sha256, NULL }
sha384Identifier AlgorithmIdentifier ::= { id-sha384, NULL }
sha512Identifier AlgorithmIdentifier ::= { id-sha512, NULL }"
This CL has been discussed at: http://golang.org/cl/177610043
Change-Id: Ic782161938b287f34f64ef5eb1826f0d936f2f71
Reviewed-on: https://go-review.googlesource.com/2256
Reviewed-by: Adam Langley <agl@golang.org>
While we're here, rename TestIssue7234 to Test7234 for consistency
with other tests.
Fixes#9557.
Change-Id: I22b0a212b31e7b4f199f6a70deb73374beb80f84
Reviewed-on: https://go-review.googlesource.com/2654
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Please see golang.org/cl/2588 for reasons behind the name change.
We also need NO_LOCAL_POINTERS for assembly function with non-zero
local frame size.
Change-Id: Iac60aa7e76f4c2ece3726e28878fd539bfebf7a4
Reviewed-on: https://go-review.googlesource.com/2589
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Previously, gccheckmark could only be enabled or disabled by calling
runtime.GCcheckmarkenable/GCcheckmarkdisable. This was a necessary
hack because GODEBUG was broken.
Now that GODEBUG works again, move control over gccheckmark to a
GODEBUG variable and remove these runtime functions. Currently,
gccheckmark is enabled by default (and will probably remain so for
much of the 1.5 development cycle).
Change-Id: I2bc6f30c21b795264edf7dbb6bd7354b050673ab
Reviewed-on: https://go-review.googlesource.com/2603
Reviewed-by: Rick Hudson <rlh@golang.org>
It was just an oversight that this one method of Logger was not
made available for the standard (std) Logger.
Fixes#9183
Change-Id: I2f251becdb0bae459212d09ea0e5e88774d16dea
Reviewed-on: https://go-review.googlesource.com/2686
Reviewed-by: Andrew Gerrand <adg@golang.org>
Renaming the function broke the race detector since it looked for the
name, didn't find it anymore and didn't insert the necessary
instrumentation.
Change-Id: I11fed6e807cc35be5724d26af12ceff33ebf4f7b
Reviewed-on: https://go-review.googlesource.com/2661
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Also fix one unaligned stack size for nacl that is caught
by this change.
Fixes#9539.
Change-Id: Ib696a573d3f1f9bac7724f3a719aab65a11e04d3
Reviewed-on: https://go-review.googlesource.com/2600
Reviewed-by: Keith Randall <khr@golang.org>
CL 2520 omitted to set the type for an OCONVNOP node.
Typechecking obviously cannot do it for us.
5g inserts float64 <--> [u]int64 conversions at walk time.
The missing type caused it to crash.
Change-Id: Idce381f219bfef2e3a3be38d3ba3c258b71310ae
Reviewed-on: https://go-review.googlesource.com/2640
Reviewed-by: Keith Randall <khr@golang.org>
Recognize loops of the form
for i := range a {
a[i] = zero
}
in which the evaluation of a is free from side effects.
Replace these loops with calls to memclr.
This occurs in the stdlib in 18 places.
The motivating example is clearing a byte slice:
benchmark old ns/op new ns/op delta
BenchmarkGoMemclr5 3.31 3.26 -1.51%
BenchmarkGoMemclr16 13.7 3.28 -76.06%
BenchmarkGoMemclr64 50.8 4.14 -91.85%
BenchmarkGoMemclr256 157 6.02 -96.17%
Update #5373.
Change-Id: I99d3e6f5f268e8c6499b7e661df46403e5eb83e4
Reviewed-on: https://go-review.googlesource.com/2520
Reviewed-by: Keith Randall <khr@golang.org>
If an inbound connection is closed, cancel the outbound http request.
This is particularly useful if the outbound request may consume resources
unnecessarily until it is cancelled.
Fixes#8406
Change-Id: I738c4489186ce342f7e21d0ea3f529722c5b443a
Signed-off-by: Peter Waller <p@pwaller.net>
Reviewed-on: https://go-review.googlesource.com/2320
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#9541.
Change-Id: I5d659ad50d7c3d1c92ed9feb86cda4c1a6e62054
Reviewed-on: https://go-review.googlesource.com/2584
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reduce buffer to maximally needed size for conversion of 64bit integers.
Reduce number of used integer divisions.
benchmark old ns/op new ns/op delta
BenchmarkItoa 144 119 -17.36%
BenchmarkPrintln 783 752 -3.96%
Change-Id: I6d57a7feebf90f303be5952767107302eccf4631
Reviewed-on: https://go-review.googlesource.com/2215
Reviewed-by: Rob Pike <r@golang.org>
Random is bad, it can block and prevent binaries from starting.
Use urandom instead. We'd rather have bad random bits than no
random bits.
Change-Id: I360e1cb90ace5518a1b51708822a1dae27071ebd
Reviewed-on: https://go-review.googlesource.com/2582
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Minux Ma <minux@golang.org>
This is a replay of CL 189760043 that is in release-branch.go1.4,
but not in master branch somehow.
Change-Id: I11eb40a24273e7be397e092ef040e54efb8ffe86
Reviewed-on: https://go-review.googlesource.com/2541
Reviewed-by: Andrew Gerrand <adg@golang.org>
In 32-bit worlds, 8-byte objects are only aligned to 4-byte boundaries.
Change-Id: I91469a9a67b1ee31dd508a4e105c39c815ecde58
Reviewed-on: https://go-review.googlesource.com/2581
Reviewed-by: Keith Randall <khr@golang.org>
For a non-zero-sized struct with a final zero-sized field,
add a byte to the size (before rounding to alignment). This
change ensures that taking the address of the zero-sized field
will not incorrectly leak the following object in memory.
reflect.funcLayout also needs this treatment.
Fixes#9401
Change-Id: I1dc503dc5af4ca22c8f8c048fb7b4541cc957e0f
Reviewed-on: https://go-review.googlesource.com/2452
Reviewed-by: Russ Cox <rsc@golang.org>
Add compile time constants for bases 10 and 16 instead of computing the cutoff
value on every invocation of ParseUint by a division.
Reduce usage of slice operations.
amd64:
benchmark old ns/op new ns/op delta
BenchmarkAtoi 44.6 36.0 -19.28%
BenchmarkAtoiNeg 44.2 38.9 -11.99%
BenchmarkAtoi64 72.5 56.7 -21.79%
BenchmarkAtoi64Neg 66.1 58.6 -11.35%
386:
benchmark old ns/op new ns/op delta
BenchmarkAtoi 86.6 73.0 -15.70%
BenchmarkAtoiNeg 86.6 72.3 -16.51%
BenchmarkAtoi64 126 108 -14.29%
BenchmarkAtoi64Neg 126 108 -14.29%
Change-Id: I0a271132120d776c97bb4ed1099793c73e159893
Reviewed-on: https://go-review.googlesource.com/2460
Reviewed-by: Robert Griesemer <gri@golang.org>
run GC in its own background goroutine making the
caller runnable if resources are available. This is
critical in single goroutine applications.
Allow goroutines that allocate a lot to help out
the GC and in doing so throttle their own allocation.
Adjust test so that it only detects that a GC is run
during init calls and not whether the GC is memory
efficient. Memory efficiency work will happen later
in 1.5.
Change-Id: I4306f5e377bb47c69bda1aedba66164f12b20c2b
Reviewed-on: https://go-review.googlesource.com/2349
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This improves the printing of GC times to be both more human-friendly
and to provide enough information for the construction of MMU curves
and other statistics. The new times look like:
GC: #8 72413852ns @143036695895725 pause=622900 maxpause=427037 goroutines=11 gomaxprocs=4
GC: sweep term: 190584ns max=190584 total=275001 procs=4
GC: scan: 260397ns max=260397 total=902666 procs=1
GC: install wb: 5279ns max=5279 total=18642 procs=4
GC: mark: 71530555ns max=71530555 total=186694660 procs=1
GC: mark term: 427037ns max=427037 total=1691184 procs=4
This prints gomaxprocs and the number of procs used in each phase for
the benefit of analyzing mutator utilization during concurrent phases.
This also means the analysis doesn't have to hard-code which phases
are STW.
This prints the absolute start time only for the GC cycle. The other
start times can be derived from the phase durations. This declutters
the view for humans readers and doesn't pose any additional complexity
for machine readers.
This removes the confusing "cycle" terminology. Instead, this places
the phase duration after the phase name and adds a "ns" unit, which
both makes it implicitly clear that this is the duration of that phase
and indicates the units of the times.
This adds a "GC:" prefix to all lines for easier identification.
Finally, this generally cleans up the code as well as the placement of
spaces in the output and adds print locking so the statistics blocks
are never interrupted by other prints.
Change-Id: Ifd056db83ed1b888de7dfa9a8fc5732b01ccc631
Reviewed-on: https://go-review.googlesource.com/2542
Reviewed-by: Rick Hudson <rlh@golang.org>
Edge cases like base 2 and 36 conversions are now covered.
Many tests are mirrored from the itoa tests.
Added more test cases for syntax errors.
Change-Id: Iad8b2fb4854f898c2bfa18cdeb0cb4a758fcfc2e
Reviewed-on: https://go-review.googlesource.com/2463
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
