This reverts commit fff4f599fe.
Reason for revert: Seems to still have issues around GC.
Fixes#32452
Change-Id: Ibe7af629f9ad6a3d5312acd7b066123f484da7f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/180761
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
When a defer is executed at most once in a function body,
we can allocate the defer record for it on the stack instead
of on the heap.
This should make defers like this (which are very common) faster.
This optimization applies to 363 out of the 370 static defer sites
in the cmd/go binary.
name old time/op new time/op delta
Defer-4 52.2ns ± 5% 36.2ns ± 3% -30.70% (p=0.000 n=10+10)
Fixes#6980
Update #14939
Change-Id: I697109dd7aeef9e97a9eeba2ef65ff53d3ee1004
Reviewed-on: https://go-review.googlesource.com/c/go/+/171758
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Make sure the side effects inside short-circuited operations (&& and ||)
happen correctly.
Before this CL, we attached the side effects to the node itself using
exprInPlace. That caused other side effects in sibling expressions
to get reordered with respect to the short circuit side effect.
Instead, rewrite a && b like:
r := a
if r {
r = b
}
That code we can keep correctly ordered with respect to other
side-effects extracted from part of a big expression.
exprInPlace seems generally unsafe. But this was the only case where
exprInPlace is called not at the top level of an expression, so I
don't think the other uses can actually trigger an issue (there can't
be a sibling expression). TODO: maybe those cases don't need "in
place", and we can retire that function generally.
This CL needed a small tweak to the SSA generation of OIF so that the
short circuit optimization still triggers. The short circuit optimization
looks for triangle but not diamonds, so don't bother allocating a block
if it will be empty.
Go 1 benchmarks are in the noise.
Fixes#30566
Change-Id: I19c04296bea63cbd6ad05f87a63b005029123610
Reviewed-on: https://go-review.googlesource.com/c/go/+/165617
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Ensure that we correctly type the stack temps for regular closures,
method function closures, and slice literals.
Then we don't need to override the dummy types later.
Furthermore, this allows order to reuse temporaries of these types.
OARRAYLIT doesn't need a temporary as far as I can tell, so I
removed that case from order.
Change-Id: Ic58520fa50c90639393ff78f33d3c831d5c4acb9
Reviewed-on: https://go-review.googlesource.com/c/140306
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Instead of allocating a new temporary each time one
is needed, keep a list of temporaries which are free
(have already been VARKILLed on every path) and use
one of them.
Should save a lot of stack space. In a function like this:
func main() {
fmt.Printf("%d %d\n", 2, 3)
fmt.Printf("%d %d\n", 4, 5)
fmt.Printf("%d %d\n", 6, 7)
}
The three [2]interface{} arrays used to hold the ... args
all use the same autotmp, instead of 3 different autotmps
as happened previous to this CL.
Change-Id: I2d728e226f81e05ae68ca8247af62014a1b032d3
Reviewed-on: https://go-review.googlesource.com/c/140301
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When we pass these types by reference, we usually have to allocate
temporaries on the stack, initialize them, then pass their address
to the conversion functions. It's simpler to pass these types
directly by value.
This particularly applies to conversions needed for fmt.Printf
(to interface{} for constructing a [...]interface{}).
func f(a, b, c string) {
fmt.Printf("%s %s\n", a, b)
fmt.Printf("%s %s\n", b, c)
}
This function's stack frame shrinks from 200 to 136 bytes, and
its code shrinks from 535 to 453 bytes.
The go binary shrinks 0.3%.
Update #24286
Aside: for this function f, we don't really need to allocate
temporaries for the convT2E function. We could use the address
of a, b, and c directly. That might get similar (or maybe better?)
improvements. I investigated a bit, but it seemed complicated
to do it safely. This change was much easier.
Change-Id: I78cbe51b501fb41e1e324ce4203f0de56a1db82d
Reviewed-on: https://go-review.googlesource.com/c/135377
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The previous CL introduced stack objects. This CL removes the old
ambiguously live liveness analysis. After this CL we're relying
on stack objects exclusively.
Update a bunch of liveness tests to reflect the new world.
Fixes#22350
Change-Id: I739b26e015882231011ce6bc1a7f426049e59f31
Reviewed-on: https://go-review.googlesource.com/c/134156
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This modifies issafepoint in liveness analysis to report almost every
operation as a safe point. There are four things we don't mark as
safe-points:
1. Runtime code (other than at calls).
2. go:nosplit functions (other than at calls).
3. Instructions between the load of the write barrier-enabled flag and
the write.
4. Instructions leading up to a uintptr -> unsafe.Pointer conversion.
We'll optimize this in later CLs:
name old time/op new time/op delta
Template 185ms ± 2% 190ms ± 2% +2.95% (p=0.000 n=10+10)
Unicode 96.3ms ± 3% 96.4ms ± 1% ~ (p=0.905 n=10+9)
GoTypes 658ms ± 0% 669ms ± 1% +1.72% (p=0.000 n=10+9)
Compiler 3.14s ± 1% 3.18s ± 1% +1.56% (p=0.000 n=9+10)
SSA 7.41s ± 2% 7.59s ± 1% +2.48% (p=0.000 n=9+10)
Flate 126ms ± 1% 128ms ± 1% +2.08% (p=0.000 n=10+10)
GoParser 153ms ± 1% 157ms ± 2% +2.38% (p=0.000 n=10+10)
Reflect 437ms ± 1% 442ms ± 1% +0.98% (p=0.001 n=10+10)
Tar 178ms ± 1% 179ms ± 1% +0.67% (p=0.035 n=10+9)
XML 223ms ± 1% 229ms ± 1% +2.58% (p=0.000 n=10+10)
[Geo mean] 394ms 401ms +1.75%
No effect on binary size because we're not yet emitting these extra
safe points.
For #24543.
Change-Id: I16a1eebb9183cad7cef9d53c0fd21a973cad6859
Reviewed-on: https://go-review.googlesource.com/109348
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Now the registration phase looks like:
var cases [4]runtime.scases
var order [8]uint16
selectsend(&cases[0], c1, &v1)
selectrecv(&cases[1], c2, &v2, nil)
selectrecv(&cases[2], c3, &v3, &ok)
selectdefault(&cases[3])
chosen := selectgo(&cases[0], &order[0], 4)
Primarily, this is just preparation for having the compiler open-code
selectsend, selectrecv, and selectdefault.
As a minor benefit, order can now be layed out separately on the stack
in the pointer-free segment, so it won't take up space in the
function's stack pointer maps.
Change-Id: I5552ba594201efd31fcb40084da20b42ea569a45
Reviewed-on: https://go-review.googlesource.com/37933
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The first word of an interface is a pointer, but for the purposes
of GC we don't need to treat it as such.
1. If it is a non-empty interface, the pointer points to an itab
which is always in persistentalloc space.
2. If it is an empty interface, the pointer points to a _type.
a. If it is a compile-time-allocated type, it points into
the read-only data section.
b. If it is a reflect-allocated type, it points into the Go heap.
Reflect is responsible for keeping a reference to
the underlying type so it won't be GCd.
If we ever have a moving GC, we need to change this for 2b (as
well as scan itabs to update their itab._type fields).
Write barriers on the first word of interfaces have already been removed.
Change-Id: I643e91d7ac4de980ac2717436eff94097c65d959
Reviewed-on: https://go-review.googlesource.com/97518
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Handle make(map[any]any) and make(map[any]any, hint) where
hint <= BUCKETSIZE special to allow for faster map initialization
and to improve binary size by using runtime calls with fewer arguments.
Given hint is smaller or equal to BUCKETSIZE in which case
overLoadFactor(hint, 0) is false and no buckets would be allocated by makemap:
* If hmap needs to be allocated on the stack then only hmap's hash0
field needs to be initialized and no call to makemap is needed.
* If hmap needs to be allocated on the heap then a new special
makehmap function will allocate hmap and intialize hmap's
hash0 field.
Reduces size of the godoc by ~36kb.
AMD64
name old time/op new time/op delta
NewEmptyMap 16.6ns ± 2% 5.5ns ± 2% -66.72% (p=0.000 n=10+10)
NewSmallMap 64.8ns ± 1% 56.5ns ± 1% -12.75% (p=0.000 n=9+10)
Updates #6853
Change-Id: I624e90da6775afaa061178e95db8aca674f44e9b
Reviewed-on: https://go-review.googlesource.com/61190
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is a crude compiler pass to eliminate stores to auto variables
that are only ever written to.
Eliminates an unnecessary store to x from the following code:
func f() int {
var x := 1
return *(&x)
}
Fixes#19765.
Change-Id: If2c63a8ae67b8c590b6e0cc98a9610939a3eeffa
Reviewed-on: https://go-review.googlesource.com/38746
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This commit reworks multiway select statements to use normal control
flow primitives instead of the previous setjmp/longjmp-like behavior.
This simplifies liveness analysis and should prevent issues around
"returns twice" function calls within SSA passes.
test/live.go is updated because liveness analysis's CFG is more
representative of actual control flow. The case bodies are the only
real successors of the selectgo call, but previously the selectsend,
selectrecv, etc. calls were included in the successors list too.
Updates #19331.
Change-Id: I7f879b103a4b85e62fc36a270d812f54c0aa3e83
Reviewed-on: https://go-review.googlesource.com/37661
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The gcCompat mode was introduced to match the new parser's node position
setup exactly with the positions used by the original parser. Some of the
gcCompat adjustments were required to satisfy syntax error test cases,
and the rest were required to make toolstash cmp pass.
This change removes the former gcCompat adjustments and instead adjusts
the respective test cases as necessary. In some cases this makes the error
lines consistent with the ones reported by gccgo.
Where it has changed, the position associated with a given syntactic construct
is the position (line/col number) of the left-most token belonging to the
construct.
Change-Id: I5b60c00c5999a895c4d6d6e9b383c6405ccf725c
Reviewed-on: https://go-review.googlesource.com/36695
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If there is a defer, and that defer recovers, then the caller
can see all of the output parameters. That means that we must
mark all the output parameters live at any point which might panic.
If there is no defer then this is not necessary. This is implemented.
We could also detect whether there is a recover in any of the defers.
If not, we would need to mark only output params that the defer
actually references (and the closure mechanism already does that).
This is not implemented.
Fixes#18860.
Change-Id: If984fe6686eddce9408bf25e725dd17fc16b8578
Reviewed-on: https://go-review.googlesource.com/36030
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Loop breaking with a counter. Benchmarked (see comments),
eyeball checked for sanity on popular loops. This code
ought to handle loops in general, and properly inserts phi
functions in cases where the earlier version might not have.
Includes test, plus modifications to test/run.go to deal with
timeout and killing looping test. Tests broken by the addition
of extra code (branch frequency and live vars) for added
checks turn the check insertion off.
If GOEXPERIMENT=preemptibleloops, the compiler inserts reschedule
checks on every backedge of every reducible loop. Alternately,
specifying GO_GCFLAGS=-d=ssa/insert_resched_checks/on will
enable it for a single compilation, but because the core Go
libraries contain some loops that may run long, this is less
likely to have the desired effect.
This is intended as a tool to help in the study and diagnosis
of GC and other latency problems, now that goal STW GC latency
is on the order of 100 microseconds or less.
Updates #17831.
Updates #10958.
Change-Id: I6206c163a5b0248e3f21eb4fc65f73a179e1f639
Reviewed-on: https://go-review.googlesource.com/33910
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is an extension of
https://go-review.googlesource.com/c/31662/
to mark all the temporaries, not just the ssa-generated ones.
Before-and-after ls -l `go tool -n compile` shows a 3%
reduction in size (or rather, a prior 3% inflation for
failing to filter temps out properly.)
Replaced name-dependent "is it a temp?" tests with calls to
*Node.IsAutoTmp(), which depends on AutoTemp. Also replace
calls to istemp(n) with n.IsAutoTmp(), to reduce duplication
and clean up function name space. Generated temporaries
now come with a "." prefix to avoid (apparently harmless)
clashes with legal Go variable names.
Fixes#17644.
Fixes#17240.
Change-Id: If1417f29c79a7275d7303ddf859b51472890fd43
Reviewed-on: https://go-review.googlesource.com/32255
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
To compile:
m[k] = v
instead of:
mapassign(maptype, m, &k, &v), do
do:
*mapassign(maptype, m, &k) = v
mapassign returns a pointer to the value slot in the map. It is just
like mapaccess except that it will allocate a new slot if k is not
already present in the map.
This makes map accesses faster but potentially larger (codewise).
It is faster because the write into the map is done when the compiler
knows the concrete type, so it can be done with a few store
instructions instead of calling typedmemmove. We also potentially
avoid stack temporaries to hold v.
The code can be larger when the map has pointers in its value type,
since there is a write barrier call in addition to the mapassign call.
That makes the code at the callsite a bit bigger (go binary is 0.3%
bigger).
This CL is in preparation for doing operations like m[k] += v with
only a single runtime call. That will roughly double the speed of
such operations.
Update #17133
Update #5147
Change-Id: Ia435f032090a2ed905dac9234e693972fe8c2dc5
Reviewed-on: https://go-review.googlesource.com/30815
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Update gc liveness to remove special conservative treatment
of ambiguously live vars, since there is no longer a need to
protect against GCDEBUG=gcdead.
Change-Id: Id6e2d03218f7d67911e8436d283005a124e6957f
Reviewed-on: https://go-review.googlesource.com/24896
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
We're dropping this behavior in favor of runtime.KeepAlive.
Implement runtime.KeepAlive as an intrinsic.
Update #15843
Change-Id: Ib60225bd30d6770ece1c3c7d1339a06aa25b1cbc
Reviewed-on: https://go-review.googlesource.com/28310
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
No point in calling a function when we can build the interface
using a known type (or itab) and the address of a local.
Get rid of third arg (preallocated stack space) to convT2{I,E}.
Makes go binary smaller by 0.2%
benchmark old ns/op new ns/op delta
BenchmarkEfaceInteger-8 16.7 10.1 -39.52%
Update #17118
Update #15375
Change-Id: I9724a1f802bfa1e3957bf1856b55558278e198a2
Reviewed-on: https://go-review.googlesource.com/29373
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
ppc64 has an extraneous variable live in some situations.
We need a better tighten pass to get rid of this extra variable.
I'm working on it, but fix the test in the meantime.
Fixes build for ppc64.
Change-Id: I1efb9ccb234a64f2a1c228abd2b3195f67fbeb41
Reviewed-on: https://go-review.googlesource.com/29353
Reviewed-by: David Chase <drchase@google.com>
The new SSA backend modifies the ABI slightly: R0 is now a usable
general purpose register.
Fixes#16677.
Change-Id: I367435ce921e0c7e79e021c80cf8ef5d1d1466cf
Reviewed-on: https://go-review.googlesource.com/28978
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Redo of CL 28575 with fixed test.
We're in a pre-KeepAlive world for a bit yet, the old tests
were in a client which was in a post-KeepAlive world.
Change-Id: I114fd630339d761ab3306d1d99718d3cb973678d
Reviewed-on: https://go-review.googlesource.com/28582
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reason for revert: broke the build due to cherrypick;
relies on an unsubmitted parent CL.
Original issue's description:
> cmd/compile: ignore contentEscapes for marking nodes as escaping
>
> We can still stack allocate and VarKill nodes which don't
> escape but their content does.
>
> Fixes#16996
>
> Change-Id: If8aa0fcf2c327b4cb880a3d5af8d213289e6f6bf
> Reviewed-on: https://go-review.googlesource.com/28575
> Run-TryBot: Keith Randall <khr@golang.org>
> TryBot-Result: Gobot Gobot <gobot@golang.org>
> Reviewed-by: David Chase <drchase@google.com>
>
Change-Id: Ie1a325209de14d70af6acb2d78269b7a0450da7a
Reviewed-on: https://go-review.googlesource.com/28578
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We can still stack allocate and VarKill nodes which don't
escape but their content does.
Fixes#16996
Change-Id: If8aa0fcf2c327b4cb880a3d5af8d213289e6f6bf
Reviewed-on: https://go-review.googlesource.com/28575
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Add the following optimizations:
- fold constants
- fold address into load/store
- simplify extensions and conditional branches
- remove nil checks
Turn on SSA on MIPS64 by default, and toggle the tests.
Fixes#16359.
Change-Id: I7f1e38c2509e22e42cd024e712990ebbe47176bd
Reviewed-on: https://go-review.googlesource.com/27870
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This time with the cherry-pick from the proper patch of
the old CL.
Stack size increased.
Corrected NaN-comparison glitches.
Marked g register as clobbered by calls.
Fixed shared libraries.
live_ssa.go still disabled because of differences.
Presumably turning on more optimization will fix
both the stack size and the live_ssa.go glitches.
Enhanced debugging output for shared libs test.
Rebased onto master.
Updates #16010.
Change-Id: I40864faf1ef32c118fb141b7ef8e854498e6b2c4
Reviewed-on: https://go-review.googlesource.com/27159
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Add more ARM64 optimizations:
- use hardware zero register when it is possible.
- use shifted ops.
The assembler supports shifted ops but not documented, nor knows
how to print it. This CL adds them.
- enable fast division.
This was disabled because it makes the old backend generate slower
code. But with SSA it generates faster code.
Turn on SSA by default, also adjust tests.
Change-Id: I7794479954c83bb65008dcb457bc1e21d7496da6
Reviewed-on: https://go-review.googlesource.com/26950
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Last part of the 386 SSA port.
Modify the x86 backend to simulate SSE registers and
instructions with 387 registers and instructions.
The simulation isn't terribly performant, but it works,
and the old implementation wasn't very performant either.
Leaving to people who care about 387 to optimize if they want.
Turn on SSA backend for 386 by default.
Fixes#16358
Change-Id: I678fb59132620b2c47e993c1c10c4c21135f70c0
Reviewed-on: https://go-review.googlesource.com/25271
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
It's not a new backend, just a PtrSize==4 modification
of the existing AMD64 backend.
Change-Id: Icc63521a5cf4ebb379f7430ef3f070894c09afda
Reviewed-on: https://go-review.googlesource.com/25586
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
NaCl code runs in sandbox and there are restrictions for its
instruction uses
(https://developer.chrome.com/native-client/reference/sandbox_internals/arm-32-bit-sandbox).
Like the legacy backend, on NaCl,
- don't use R9, which is used as NaCl's "thread pointer".
- don't use Duff's device.
- don't use indexed load/stores.
- the assembler rewrites DIV/MOD to runtime calls, which on NaCl
clobbers R12, so R12 is marked as clobbered for DIV/MOD.
- other restrictions are satisfied by the assembler.
Enable SSA specific tests on nacl/arm, and disable non-SSA ones.
Updates #15365.
Change-Id: I9262693ec6756b89ca29d3ae4e52a96fe5403b02
Reviewed-on: https://go-review.googlesource.com/24859
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
As Josh mentioned in CL 24716, there has been requests for using SSA
for ARM. SSA can still be disabled by setting -ssa=0 for cmd/compile,
or partially enabled with GOSSAFUNC, GOSSAPKG, and GOSSAHASH.
Not enable SSA by default on NaCl, which is not supported yet.
Enable SSA-specific tests on ARM: live_ssa.go and nilptr3_ssa.go;
disable non-SSA tests: live.go, nilptr3.go, and slicepot.go.
Updates #15365.
Change-Id: Ic2ca8d166aeca8517b9d262a55e92f2130683a16
Reviewed-on: https://go-review.googlesource.com/23953
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Some tests disabled, some bifurcated into _ssa and not,
with appropriate logging added to compiler.
"tests/live.go" in particular needs attention.
SSA-specific testing removed, since it's all SSA now.
Added "-run_skips" option to tests/run.go to simplify
checking whether a test still fails (or how it fails)
on a skipped platform.
The compiler now compiles with SSA by default.
If you don't want SSA, specify GOSSAHASH=n (or N) as
an environment variable. Function names ending in "_ssa"
are always SSA-compiled.
GOSSAFUNC=fname retains its "SSA for fname, log to ssa.html"
GOSSAPKG=pkg only has an effect when GOSSAHASH=n
GOSSAHASH=10101 etc retains its name-hash-matching behavior
for purposes of debugging.
See #13068
Change-Id: I8217bfeb34173533eaeb391b5f6935483c7d6b43
Reviewed-on: https://go-review.googlesource.com/16299
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
The flag updates error annotations in test files from actual compiler output.
This is useful when doing compiler changes that add/remove/change lots of errors,
or when adding lots of new tests.
Also I noticed at least 2 cases where annotation were sub-optimal:
1. The annotation was "leaking param p" when the actual error is
"leaking param p to result ~r1".
2. The annotation was "leaking param m" when the actual errors
are "leaking param m" and "leaking param mv1".
For now it works only for errorcheck mode.
Also, apply the update to escape and liveness tests.
Some files have gccgo-specific errors of the form "gc error|gccgo error",
so it is risky to run update on all files. Gccgo-specific error
does not necessary contain '|', it can be just truncated.
Change-Id: Iaaae767f859dcb8321a8cb4970b2b70969e8a345
Reviewed-on: https://go-review.googlesource.com/5310
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Consider an interface value i of type I and concrete value c of type C.
Prior to this CL, i==c was evaluated as
I(c) == i
Evaluating I(c) can allocate.
This CL changes the evaluation of i==c to
x, ok := i.(C); ok && x == c
The new generated code is shorter and does not allocate directly.
If C is small, as it is in every instance in the stdlib,
the new code also uses less stack space
and makes one runtime call instead of two.
If C is very large, the original implementation is used.
The cutoff for "very large" is 1<<16,
following the stack vs heap cutoff used elsewhere.
This kind of comparison occurs in 38 places in the stdlib,
mostly in the net and os packages.
benchmark old ns/op new ns/op delta
BenchmarkEqEfaceConcrete 29.5 7.92 -73.15%
BenchmarkEqIfaceConcrete 32.1 7.90 -75.39%
BenchmarkNeEfaceConcrete 29.9 7.90 -73.58%
BenchmarkNeIfaceConcrete 35.9 7.90 -77.99%
Fixes#9370.
Change-Id: I7c4555950bcd6406ee5c613be1f2128da2c9a2b7
Reviewed-on: https://go-review.googlesource.com/2096
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Now the only difference between dev.cc and dev.garbage
is the runtime conversion on the one side and the
garbage collection on the other. They both have the
same set of changes from default and dev.power64.
LGTM=austin
R=austin
CC=golang-codereviews
https://golang.org/cl/172570043
Now each C printf, Go print, or Go println is guaranteed
not to be interleaved with other calls of those functions.
This should help when debugging concurrent failures.
LGTM=rlh
R=rlh
CC=golang-codereviews
https://golang.org/cl/169120043