Enable a bunch of types2-related error tests to run successfully, so
they no longer have to be disabled in run.go.
- directive.go: split it into directive.go and directive2.go, since the
possible errors are now split across the parser and noder2, so they
can't all be reported in one file.
- linkname2.go: similarly, split it into linkname2.go and linkname3.go
for the same reason.
- issue16428.go, issue17645.go, issue47201.dir/bo.go: handle slightly
different wording by types2
- issue5609.go: handle slight different error (array length must be
integer vs. array bound too large).
- float_lit3.go: handle slightly different wording (overflows
float vs cannot convert to float)
I purposely didn't try to fix tests yet where there are extra or missing
errors on different lines, since that is not easy to make work for both
-G=3 and -G=0. In a later change, will flip to make the types2 version
match correctly, vs. the -G=0 version.
Change-Id: I6079ff258e3b90146335b9995764e3b1b56cda59
Reviewed-on: https://go-review.googlesource.com/c/go/+/368455
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Use gp.m.curg instead of the gp when recording cpu profiler stack
traces. This ensures profiler labels are captured when systemstack or similar
is executing on behalf of the current goroutine.
After this there are still rare cases of samples containing the labelHog
function, so more work might be needed. This patch should fix ~99% of the
problem.
Also change testCPUProfile interface a little to allow the new test to
re-run with a longer duration if it fails during a -short run.
Fixes#48577.
Change-Id: I3dbc9fd5af3c513544e822acaa43055b2e00dfa9
Reviewed-on: https://go-review.googlesource.com/c/go/+/367200
Trust: Michael Pratt <mpratt@google.com>
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Fixes#49927
Change-Id: I8b34cf13b3bc6338309f005648ca3ee6852927f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/368954
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
PPC64's MAXWIDTH is set as 1<<60 whereas on other 64-bit
architetures it is set as 1<<50. Set to 1<<50 for consistency. The
toolchain cannot handle such large program anyway.
May fix PPC64 build.
Change-Id: Ic3972a089b2f14a96e4ded57ef218d763c924a6a
Reviewed-on: https://go-review.googlesource.com/c/go/+/368955
Trust: Cherry Mui <cherryyz@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
On macOS 12 a new malloc implementation (nano) is used by default,
and apparently it reserves address range
0x600000000000-0x600020000000, which conflicts with the address
range that TSAN uses for Go. Work around the issue by changing the
address range slightly.
The actual change is made on LLVM at https://reviews.llvm.org/D114825 .
This CL includes syso's built with the patch applied.
Fixes#49138.
Change-Id: I7b367d6e042b0db39a691c71601c98e4f8728a70
Reviewed-on: https://go-review.googlesource.com/c/go/+/367916
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
For #44853
For #47694
Change-Id: Ia76246218b1361d8bdf510bbfc5178c83cdd3eec
Reviewed-on: https://go-review.googlesource.com/c/go/+/368834
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
CL 205237 allowed SSL_CERT_DIR to be a colon delimited list of
directories. In the case that SSL_CERT_DIR is unset, the change
also made certDirectories to all be loaded rather than stopping
after successfully reading at least one file from a directory.
This update fixes code comments on the certDirectories package
level variables to reflect current behavior.
Fixes#48808
Change-Id: Id92f875545272fc6205d9955d03ea7bf844f15eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/354140
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Katie Hockman <katie@golang.org>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Trust: Katie Hockman <katie@golang.org>
This is based off Michael's notes.
Updates #47694
Change-Id: I6e7944f85b776e8481829a2fafd177a49557c6ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/368156
Trust: Jeremy Faller <jeremy@golang.org>
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
First, we need to set base.Pos in varDecl() and typeDecl(), so it will
be correct if we need to report type size errors while converting types.
Changed error calls in types/sizes.go to use Errorf, not ErrorfAt, since
we want to use base.Pos (which will set from t.Pos(), if that is
available).
Second, we need to add an extra call CalcSize(t1.Elem()) in the
TCHANARGS case of CalcSize(). We can use CalcSize() rather than
CheckSize(), since we know the top-level recursive type will have been
calculated by the time we process the fake TCHANARGS type. In -G=0 mode,
the size of the channel element has often been calculated because of
some other processing (but not in the case of #49767). But in -G=3 mode,
we just calculate sizes during the single noder2 pass, so we are more
likely to have not gotten to calculating the size of the element yet,
depending on the order of processing of the deferredTypeStack.
Fixes the tests fixedbugs/issue{42058a,42058b}.go that were
disabled for -G=3 mode.
Had to add exceptions in stdlib_test.go for go/types and types2, because
the types2 typechecker does not know about type size limits.
Fixes#49814Fixes#49771
Updates #49767
Change-Id: I77d058e8ceff68a58c4c386a8cf46799c54b04c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/367955
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This description is based on https://golang.org/cl/321490.
Updates #47694
Change-Id: I48656cd487d2fccf0b0d3390f350f1bc6f2b0080
Reviewed-on: https://go-review.googlesource.com/c/go/+/365738
Trust: Jeremy Faller <jeremy@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Update the vendored x/tools to pick up CL 364678, which updates vet
analyzers following a change to the underlying of type parameters.
This also pulls in significant changes to the typeutil package to
support new constructs in typeutil.Map, but this is not used by vet.
The following commands were used:
go get -d golang.org/x/tools@e212aff8fd146c44ddb0167c1dfbd5531d6c9213
go mod tidy
go mod vendor
Fixes#49855
Change-Id: I3ffc59f3693710c83b81d390999aeabc8043723b
Reviewed-on: https://go-review.googlesource.com/c/go/+/368774
Trust: Robert Findley <rfindley@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The new minimum heap of 512 KiB has been the cause of some build
slowdown (~1%) and microbenchmark slowdown (usually ~0%, up to ~50%)
because of two reasons:
1. Applications with lots of small short-lived processes execute many
more GC cycles.
2. Applications with heaps <4 MiB GC up to 8x more often.
In many ways these consequences are inevitable given how GOGC works,
however we need to investigate more as to whether the apparent slowdowns
are indeed unavoidable or if the GC has issues scaling down, which it's
too late for for this release.
Given that this release is already huge, it's OK to push this back.
We'll take a closer look at it next cycle, so place block it behind a
new goexperiment to allow users and ourselves to easily experiment with
it.
Fixes#49744.
Updates #44167.
Change-Id: Ibad51f7873de7517490c89802f3c593834e77ff0
Reviewed-on: https://go-review.googlesource.com/c/go/+/368137
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
When we set g.curDecl for the type params created during fillinMethods
for an instantiated type, we need to save/restore its value, because
fillinMethods() may be called while processing a typeDecl. We want the
value of g.curDecl to continue to be correct for type params created in
the typeDecl. Because of ordering issues, not restoring g.curDecl
happens to cause problems (which don't always show up visibly) exactly
when a type param is not actually used in a type declaration.
Cleared g.curDecl to "" at the later points in typeDecl() and
funcDecl(). This allows adding asserts that g.curDecl is always empty
("") when we set it in typeDecl() and funcDecl(), and always non-empty
when we use it in typ0().
Fixes#49893
Change-Id: Ic2fb1df791585bd257f2b86ffaae0453c31705c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/368454
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
When TestPacketConn was added (in CL 6501057) it included arbitrary
100ms deadlines. Those deadlines were arbitrarily increased to 500ms
in CL 4922.
If the test is actually provoking a deadlock, allowing it to deadlock
will give us a more useful goroutine dump. Otherwise, the deadlines
don't seem all that useful — they appear to increase code coverage,
but have no effect on the test in the typical case, and can only
cause flakes on particularly-slow machines.
For #43627
Change-Id: I83de5217c54c743b83adddf51d4f6f2bd5b91732
Reviewed-on: https://go-review.googlesource.com/c/go/+/368215
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If this test fails, we want to know exactly what the os/exec
goroutines are doing. Panicking gives us a goroutine dump,
whereas t.Fatal does not.
While we're here, use exponential backoff instead of a hard-coded 1ms
sleep. We want to give the OS enough time to actually terminate the
subprocess.
For #42061
Change-Id: I3d50a71ac314853c68a935218e7f97ce18b08b5b
Reviewed-on: https://go-review.googlesource.com/c/go/+/368317
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We guard against caching or reusing interfaces on the RHS of a type
declaration, because for such interfaces the base type is used as the
interface method receiver type. However, we don't need to do this for
empty interfaces. By refining our guard, we can allow importing the
predeclared 'any' type on the RHS of a type declaration.
Update tests to add more coverage for importing generic export data.
Some accomodation had to be made for the unified builder, which does not
yet fully support generics in export data.
Fixes#49888
Change-Id: I51f329de464fc7309f95991b839ab55868c2924f
Reviewed-on: https://go-review.googlesource.com/c/go/+/367851
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
ReadFileRevs function is no longer used.
Change-Id: Ibac6319dca4cf8010195e7c2fb502655494fb728
Reviewed-on: https://go-review.googlesource.com/c/go/+/367756
Run-TryBot: Baokun Lee <bk@golangcn.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Baokun Lee <bk@golangcn.org>
Currently, markroot is very clever about accessing the allgs slice to
find stack roots. Unfortunately, on weak memory architectures, it's a
little too clever and can sometimes read a nil g, causing a fatal
panic.
Specifically, gcMarkRootPrepare snapshots the length of allgs during
STW and then markroot accesses allgs up to this length during
concurrent marking. During concurrent marking, allgadd can append to
allgs *without synchronizing with markroot*, but the argument is that
the markroot access should be safe because allgs only grows
monotonically and existing entries in allgs never change.
This reasoning is insufficient on weak memory architectures. Suppose
thread 1 calls allgadd during concurrent marking and that allgs is
already at capacity. On thread 1, append will allocate a new slice
that initially consists of all nils, then copy the old backing store
to the new slice (write A), then allgadd will publish the new slice to
the allgs global (write B). Meanwhile, on thread 2, markroot reads the
allgs slice base pointer (read A), computes an offset from that base
pointer, and reads the value at that offset (read B). On a weak memory
machine, thread 2 can observe write B *before* write A. If the order
of events from thread 2's perspective is write B, read A, read B,
write A, then markroot on thread 2 will read a nil g and then panic.
Fix this by taking a snapshot of the allgs slice header in
gcMarkRootPrepare while the world is stopped and using that snapshot
as the list of stack roots in markroot. This eliminates all read/write
concurrency around the access in markroot.
Alternatively, we could make markroot use the atomicAllGs API to
atomically access the allgs list, but in my opinion it's much less
subtle to just eliminate all of the interesting concurrency around the
allgs access.
Fixes#49686.
Fixes#48845.
Fixes#43824.
(These are all just different paths to the same ultimate issue.)
Change-Id: I472b4934a637bbe88c8a080a280aa30212acf984
Reviewed-on: https://go-review.googlesource.com/c/go/+/368134
Trust: Austin Clements <austin@google.com>
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Issue #27250 reproduced readily enough to keep the subprocess hung
indefinitely when it occurred, so the timeout does not need to be
short to maintain test fidelity. On the other hand, on heavily loaded
systems it might take a while for the kernel to actually start the
subprocess, and it might also take a while for control flow to return
to the test after the subprocess exits.
We can reduce noise from this test in two ways:
1. Measure the timeout from closer to when the subprocess actually
starts sleeping, instead of when we started creating the subprocess.
2. Use a longer timeout, since it doesn't actually need to be short.
Fixes#38921
Updates #27250
Change-Id: I01c11ae82d0cdc6e7def2da6544b4d07201b35e8
Reviewed-on: https://go-review.googlesource.com/c/go/+/367849
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The Linux kernel for riscv64 does not include an sa_restorer field on
its sigaction struct, and expects sa_mask to come immediately after the
sa_flags field. Arrange the fields of the sigaction struct that are
known to the kernel so they appear at the correct byte offsets, and so
they agree with the output of "go tool cgo -godefs".
Follow the example set by the mips/mipsle port to leave the sa_restorer
field in place, but at an offset where it won't hurt anything.
Fixes#49709
Change-Id: I9bb0d7dbd7439d07e3a204461c7d790f33fd4977
Reviewed-on: https://go-review.googlesource.com/c/go/+/367635
Run-TryBot: Rhys Hiltner <rhys@justin.tv>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Joel Sing <joel@sing.id.au>
Trust: Ian Lance Taylor <iant@golang.org>
Apparently, on the iOS builder sendfile causes a SIGSYS signal
(instead of returning ENOSYS). Disabling it for now so we can
make progress on iOS. We can revisit if sendfile is actually
broken on iOS and whether it is beneficial.
Updates #49616.
Change-Id: I3883fad0ce35e3f0aa352301eb499a1afa0225a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/368054
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Changkun Ou <mail@changkun.de>
Reviewed-by: Roland Shoemaker <roland@golang.org>
Some critical Version == "" checks were missing in mvs.go, causing
mvs.Req to fail to retain requirements provided by older versions of
main modules.
A few checks also ought to be rotated to put the less expensive
string-equality checks before the more expensive map lookups.
Fixes#48511
Change-Id: Ib8de9d49a6413660792c003866bfcf9ab7f82ee2
Reviewed-on: https://go-review.googlesource.com/c/go/+/368136
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Currently, identical handles any and interface{} by checking against
Types[TINTER]. This is not always true, since when two generated
interface{} types may not use the same *Type instance.
Instead, we must check whether Type is empty interface or not.
Fixes#49875
Change-Id: I28fe4fc0100041a01bb03da795cfe8232b515fc4
Reviewed-on: https://go-review.googlesource.com/c/go/+/367754
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TestSignalIgnoreSIGTRAP is flaky on OpenBSD and the cause is suspected
to be a kernel bug. This test is currently only skipped on the previous
OpenBSD 6.2 and 6.4 builders for #17496. In the meantime the OpenBSD
builders were upgraded to more recent OpenBSD versions (currently 6.8
and 7.0). It seems the issue is still present in these OpenBSD versions
and there is no obvious workaround in Go. Thus, skip the flaky test on
OpenBSD in general.
Updates #17496
Updates #49725
Change-Id: I3577d287dcfaad7a81679db2e71540854fce065a
Reviewed-on: https://go-review.googlesource.com/c/go/+/367115
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
As suggested by #49680, a GC could be in-progress when we
disable GC. Force a GC after we pause to ensure we don't
hang in this case.
For #49695
Change-Id: I4fc4c06ef2ac174217c3dcf7d58c7669226e2d24
Reviewed-on: https://go-review.googlesource.com/c/go/+/367874
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Paul Murphy <murp@ibm.com>
Make Settings more closely align with command-line flags
and environment variables.
- Change command-line flags to begin with -
- Change syntax of build lines to use Key=Value instead of Key<tab>Value.
- Change CGO_ENABLED to 0/1, matching environment variable,
instead of false/true.
- Add GOOS and GOARCH.
These are technically redundant, in that they can be extracted
from the binary in other ways most of the time, but not always:
GOOS=ios and GOOS=darwin may produce binaries that are
difficult to tell apart. In any case, it's a lot easier to have them
directly in the settings list than derive them from other parts
of the binary.
- Add GOEXPERIMENT.
These could be inferred from the tags list, but the experiments
are being removed from the tags list.
- Change the tags list to match the -tags command-line argument.
- Add msan and race, echoing the -msan and -race arguments
(always 'true' when present, omitted when false).
- Add GO$GOARCH when set.
Change-Id: Icb59ef4faa5c22407eadd94147b7e53cf4344ce6
Reviewed-on: https://go-review.googlesource.com/c/go/+/358539
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
If a GC triggers while spinning in RewindAndSetgid, it may result in
this test hanging. Avoid it by disabling the collector before entering
the uninterruptable ASM conditional wait.
Fixes#49695
Change-Id: Ie0a03653481fb746f862469361b7840f4bfa8b67
Reviewed-on: https://go-review.googlesource.com/c/go/+/365836
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This test occasionally hangs on the darwin-arm64-11_0-toothrot
builder. When it does, it fails with the unhelpful error message
"timeout" instead of a useful goroutine dump.
This change eliminates the use of an arbitrary timeout channel, so
that if (and probably when) the test hangs again we will get more
useful logs to diagnose the root cause.
For #49860
Change-Id: I23f6f1c81209f0b2dbe565e1dfb26b1b2eff0187
Reviewed-on: https://go-review.googlesource.com/c/go/+/367615
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
When syscall's DLL.FindProc calls into syscall_getprocaddress with a
byte slice pointer, we need to keep those bytes alive. Otherwise the GC
will collect the allocation, and we wind up calling `GetProcAddress` on
garbage, which showed up as various flakes in the builders. It turns out
that this problem extends to many uses of //go:cgo_unsafe_args
throughout, on all platforms. So this patch fixes the issue by keeping
non-integer pointer arguments alive through their invocation in
//go:cgo_unsafe_args functions.
Fixes#49731.
Change-Id: I93e4fbc2e8e210cb3fc53149708758bb33f2f9c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/367654
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Patrik Nyblom <pnyb@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Don't expect/allow generics-related info in iexportVersion 1, now that
we increased the export version to 2.
Fixes#49853
Change-Id: I9bacee7f8e7cb9bb3b02a00084fad77edd220121
Reviewed-on: https://go-review.googlesource.com/c/go/+/367634
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Avoid a panic by handling the case of no specific target type in a type
parameter to type parameter conversions.
Fixes#49864
Change-Id: I117dd80cc9d47c8c1e168f1caf0f281726270c84
Reviewed-on: https://go-review.googlesource.com/c/go/+/367616
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
TypeParam.iface may mutate TypeParam.bound in the event that the type
parameter bound is not an interface.
Ensure that iface() is called before the type-checking pass returns, and
before NewTypeParam or TypeParam.SetConstraint exits.
Fixes#49788
Change-Id: I72279acf5f0223161671c04887bc2c3df4158927
Reviewed-on: https://go-review.googlesource.com/c/go/+/367614
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This is a port of CL 366758 from types2 to go/types.
For #49179.
Change-Id: I7e1c6ffb392d5c535cf901004b7acbe8c3be9b0f
Reviewed-on: https://go-review.googlesource.com/c/go/+/367199
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This is a port of CL 366757 from types2 to go/types,
adjusted for the different handling of index expressions
in go/types.
For #49179.
Change-Id: Ic859eb09683134d055e28c8e0cb1f3814a87dc5c
Reviewed-on: https://go-review.googlesource.com/c/go/+/367198
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This is a clean port of CL 366278 from types2 to go/types.
For #49739.
Change-Id: I2e2cb739c02fcc07e012499c7b65b13b057875ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/367197
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
