Initial addition of a password entry dialog. Looks like:
+------------------------------------------------+
| LUKS Passphrase /dev/sdb1 |
+------------------------------------------------+
| Enter LUKS passphrase to open /dev/sdb1 |
| Passphrase: [ ] |
| |
| [ Cancel ] [ Unlock ] |
+------------------------------------------------+
A standard Gtk Dialog is used to accept the password once, with any
errors displayed in a separate error dialog afterwards. This is poor UI
design. A password dialog should remain open for all authentication
attempts and only close when successful or the dialog is cancelled or
closed. This UI design issue will be improved in following commits.
Bug 795617 - Implement opening and closing of LUKS mappings
Application level requirements for secure password management were set
out in "LUKS password handling, threats and preventative measures" [1].
The requirements are:
1) Passwords are stored in RAM and are not allowed to be paged to swap.
(However hibernating with GParted still running will write all of RAM
to swap).
2) Passwords are wiped from RAM when no longer needed. When each
password is no longer needed and when GParted closes.
3) Passwords are referenced by unique key. Recommend using LUKS UUIDs
as the unique key.
(Each LUKS password should only ever need to be entered once for each
execution of GParted. Therefore the passwords can't be stored in any
of the existing data structures such as Partitions or LUKS_Info cache
because all of these are cleared and reloaded on each device
refresh).
There seems to be two possible implementation methods: use an existing
library to provide secure memory handling, or write our own.
Libgcrypt [2] and libsodium [3] cryptographic libraries both provide
secure memory handling. (Secure memory is quite simple really, some
virtual memory locked into RAM which is zeroed when no longer needed).
Linking to an encryption library just to provide secure memory seems
like using a sledge hammer to crack a nut. Also because of requirement
(3) above a module is needed to "own" the pointers to the passwords in
the secure memory. Managing the secure memory ourselves is probably no
more code that that needed to interface to libgcrypt. Therefore handle
the secure memory ourselves.
So far the module is only compiled. It is not used anywhere in GParted.
[1] LUKS password handling, threats and preventative measures
https://bugzilla.gnome.org/show_bug.cgi?id=627701#c56
[2] libgcrypt general purpose cryptographic library, as used in GNU
Privacy Guard
https://gnupg.org/related_software/libgcrypt/
[3] libsodium crypto library
https://download.libsodium.org/doc/
Bug 795617 - Implement opening and closing of LUKS mappings
To be consistent with all previous bug messages being translatable.
Also only mark the bug as a warning instead of an error because the bug
doesn't cause any disk drive operations to fail.
Bug 790842 - Report libparted messages into operation details at the
point at which they occur
An action file is always needed with polkit to describe the privileged
actions that are available to the subject (client program). For GParted
the only available action is to run the gparted shell script as root.
Note that the polkit action file will be installed into location
$(prefix)/share/polkit-1/actions. This is required by the GNU Coding
Standards [1] and to prevent 'make distcheck' from failing [2]. However
polkit only uses /usr/share/polkit-1/actions for it's action files [3].
This dilemma was discussed in this Bugzilla bug 776437 and on the
general Automake discussion email list [4]. The solution is to simply
document in the README file that a manual additional installation step
may be required.
The action file is marked as translatable with the underscore (_) of the
_description and _message tags identifying the string to be translated.
Use of INTLTOOL_POLICY_RULE in Makefile.am to merge translations into
the polkit action file necessitates increasing the minimum version of
intltool to 0.36.0 where it was first introduced in intltool.m4. This
will prevent GParted building on RedHat/CentOS 5 which only has intltool
0.35.0. But that doesn't matter because RedHat/CentOS 5 reached end of
life on 31st March 2017.
[1] GNU Coding Standards, 7.2.5 Variables for Installation Directories
https://www.gnu.org/prep/standards/standards.html#Directory-Variables
[2] Automake Manual, 27.10 Installing to Hard-Coded Locations
https://www.gnu.org/software/automake/manual/automake.html#Hard_002dCoded-Install-Paths
"My package needs to populate the installation directory of another
package at install-time. I can easily compute that installation
directory in configure, but if I install files therein,
'make distcheck' fails. How else should I do?"
[3] polkit(8), Declaring Actions
https://www.freedesktop.org/software/polkit/docs/latest/polkit.8.html#polkit-declaring-actions
"A mechanism need to declare a set of actions in order to use
polkit. Actions correspond to operations that clients can request
the mechanism to carry out and are defined in XML files that the
mechanism installs into the /usr/share/polkit-1/actions directory."
[4] Not installing to hard-coded locations vs polkit's fixed location
http://lists.gnu.org/archive/html/automake/2017-08/msg00015.html
Bug 776437 - GParted fails to run as root under Wayland
Add support for detecting UDF file systems and formatting hard disks
with revision 2.01 UDF file systems using udftools. Formatting optical
disks or any other media types is not supported yet. Changing label or
UUID after formatting is not supported as the tools do not yet exist.
Bug 784533 - Add support for UDF file system
Files were named Block_Copy and the class was named block_copy. Change
to the primary naming convention of CamelCase class name and matching
file names.
Also make CopyBlocks::copy_block() a private method as it is only used
internally within the class.
Bug 775932 - Refactor mostly applying of operations
The GParted_Core::mount_info and GParted_Core::fstab_info maps and the
methods that manipulate them are self-contained. Therefore move them to
a separate Mount_Info module and reduce the size of the monster
GParted_Core slightly.
In some cases creating an LVM2 Physical Volume on top of a DMRaid array
reports no usage information and this partition warning:
Unable to read the contents of this file system!
Because of this some operations may be unavailable.
The cause might be a missing software package.
The following list of software packages is required for lvm2
pv file system support: lvm2.
For example on Ubuntu 14.04 LTS (with GParted built with
--enable-libparted-dmraid) create an LVM2 PV in a DMRaid array
partition. GParted uses this command:
# lvm pvcreate -M 2 /dev/mapper/isw_bacdehijbd_MyArray0p2
But LVM reports the PV having a different name:
# lvm pvs
PV VG Fmt Attr PSize PFree
/dev/disk/by-id/dm-name-isw_bacdehijbd_MyArray0p2 lvm2 a-- 1.00g 1.00g
This alternate name is loaded into the LVM2_PV_Info module cache. Hence
when GParted queries partition /dev/mapper/isw_bacdehijbd_MyArray0p2 it
has no PV information against that name and reports unknown usage.
However they are actually the same block special device; major 252,
minor 2:
# ls -l /dev/mapper/isw_bacdehijbd_MyArray0p2
brw-rw---- 1 root disk 252, 2 Jul 2 11:09 /dev/mapper/isw_bacdehijbd_MyArray0p2
# ls -l /dev/disk/by-id/dm-name-isw_bacdehijbd_MyArray0p2
lrwxrwxrwx 1 root root 10 Jul 2 11:09 /dev/disk/by-id/dm-name-isw_bacdehijbd_MyArray0p2 -> ../../dm-2
# ls -l /dev/dm-2
brw-rw---- 1 root disk 252, 2 Jul 2 11:09 /dev/dm-2
To determine if two names refer to the same block special device their
major, minor numbers need to be compared, instead of string comparing
their names.
Implement class BlockSpecial which encapsulates the name and major,
minor numbers for a block special device. Also performs comparison as
needed. See bug 767842 comments 4 and 5 for further investigation and
decision for choosing to implement a class.
Replace name strings in the LVM2_PV_Info module with BlockSpecial
objects performing correct block special device comparison.
Bug 767842 - File system usage missing when tools report alternate block
device names
Write a generic progress bar class. Has the following features:
* Has separate progress and target numbers, rather than a single
completion fraction, to enable the the next feature.
* Optionally generates text reporting the amount of data copied using
the progress and target numbers like this:
"1.00 MiB of 16.00 MiB copied"
* After running for 5 seconds, also add estimated remaining time.
(Waits to allow the data copying rate to settle down a little before
estimating the remaining time). Looks like this:
"1.00 MiB of 16.00 MiB copied (00:01:59) remaining)"
The ProgressBar class is not driving the visual progress bar yet. It
has just been added into the internal block copy algorithm and generates
debug messages showing the progress bar is operating correctly.
Debugging looks like this:
DEBUG: ProgressBar::start(target=2.0636e+09, text_mode=PROGRESSBAR_TEXT_COPY_BYTES)
DEBUG: ProgressBar::update(progress=1.30023e+08) m_fraction=0.0630081 m_text="124.00 MiB of 1.92 GiB copied"
DEBUG: ProgressBar::update(progress=2.67387e+08) m_fraction=0.129573 m_text="255.00 MiB of 1.92 GiB copied"
DEBUG: ProgressBar::update(progress=4.0475e+08) m_fraction=0.196138 m_text="386.00 MiB of 1.92 GiB copied"
...
DEBUG: ProgressBar::update(progress=1.13351e+09) m_fraction=0.549289 m_text="1.06 GiB of 1.92 GiB copied (00:00:04 remaining)"
DEBUG: ProgressBar::update(progress=1.26249e+09) m_fraction=0.611789 m_text="1.18 GiB of 1.92 GiB copied (00:00:04 remaining)"
DEBUG: ProgressBar::update(progress=1.39041e+09) m_fraction=0.67378 m_text="1.29 GiB of 1.92 GiB copied (00:00:03 remaining)"
...
DEBUG: ProgressBar::update(progress=1.97552e+09) m_fraction=0.957317 m_text="1.84 GiB of 1.92 GiB copied (00:00:00 remaining)"
DEBUG: ProgressBar::update(progress=2.0636e+09) m_fraction=1 m_text="1.92 GiB of 1.92 GiB copied"
DEBUG: ProgressBar::stop()
Bug 760709 - Add progress bars to XFS and EXT2/3/4 file system specific
copy methods
Absolute minimum implementation of a PartitionLUKS class which can be
constructed, polymorphically copied and destroyed. Contains an
"encrypted" member of type Partition to represent the encrypted file
system within the LUKS format.
Create PartitionLUKS objects instead of base Partition objects when a
LUKS formatted partition is found. Only the base Partition object
member values have been populated, and the "encrypted" member remains
blank at this point.
Bug 760080 - Implement read-only LUKS support
Provide a minimal implementation of a luks file system class which only
does busy detection.
NOTE:
For now, read-only LUKS support, a LUKS partition will be busy when a
dm-crypt mapping exists. Later when read-write LUKS support is added
GParted will need to look at the busy status of the encrypted file
system within the open LUKS partition and map LUKS partition busy status
to encryption being open or closed.
Bug 760080 - Implement read-only LUKS support
Load basic details of active Device-mapper encryption mappings from the
kernel. Use dmsetup active targets.
# cryptsetup luksFormat /dev/sdb5
# cryptsetup luksFormat /dev/sdb6
# cryptsetup luksOpen /dev/sdb6 sdb6_crypt
# ls -l /dev/mapper/sdb6_crypt /dev/dm-0
lrwxrwxrwx. 1 root root 7 Nov 15 09:03 /dev/mapper/sdb6_crypt -> ../dm-0
brw-rw----. 1 root disk 253, 0 Nov 15 09:03 /dev/dm-0
# ls -l /dev/sdb6
brw-rw----. 1 root disk 8, 22 Nov 15 09:02 /dev/sdb6
# dmsetup table --target crypt
sdb6_crypt: 0 1044480 crypt aes-cbc-essiv:sha256 0000000000000000000000000000000000000000000000000000000000000000 0 8:22 4096
So far just load the mapping name and underlying block device reference
(path or major, minor pair).
Note that all supported kernels appear to report the underlying block
device as major, minor pair in the dmsetup output. Underlying block
device paths are added to the cache when found during a search to avoid
stat(2) call on subsequent searches for the same path.
Prints debugging to show results, like this:
# ./gpartedbin
======================
libparted : 2.4
======================
DEBUG: /dev/sdb5: LUKS closed
DEBUG: /dev/sdb6: LUKS open mapping /dev/mapper/sdb6_crypt
Bug 760080 - Implement read-only LUKS support
The PartitionVector class is now internally using pointers to Partition
objects and taking on management of their lifetimes. It therefore has
to implement the Big 3: destructor, copy constructor and copy assignment
operator [1][2]. This is because the implicitly-defined copy
constructor and assignment operator perform memberwise "shallow copying"
and the destructor does nothing. This not correct for classes which
contain non-class types such as raw pointers.
The semantics of the interface still copies each Partition object into
the PartitionVector when they are added with push_back() and insert().
Note that a PartitionVector object is explicitly copy assigned in
Win_GParted::Refresh_Visual(). They are also implicitly copied when
(1) the implementing vector is resized larger to allow it to hold more
pointers to Partition objects than it previously had capacity for; and
(2) a Partition object is copied including the logicals PartitionVector
member.
[1] The rule of three/five/zero
http://en.cppreference.com/w/cpp/language/rule_of_three
[2] Rule of Three
https://en.wikipedia.org/wiki/Rule_of_three_%28C%2B%2B_programming%29
Bug 759726 - Implement Partition object polymorphism
Detection of Linux SWRaid members currently fails in a number of cases:
1) Arrays which use metadata type 0.90 or 1.0 store the super block at
the end of the partition. So file system signatures in at least
linear and mirrored arrays occur at the same offsets in the
underlying partitions. As libparted only recognises file systems
this is what is detected, rather than an SWRaid member.
# mdadm -E -s -v
ARRAY /dev/md/1 level=raid1 metadata=1.0 num-devices=2 UUID=15224a42:c25bbcd9:15db6000:4e5fe53a name=chimney:1
devices=/dev/sda1,/dev/sdb1
...
# wipefs /dev/sda1
offset type
----------------------------------------------------------------
0x438 ext4 [filesystem]
LABEL: chimney-boot
UUID: 10ab5f7d-7d8a-4171-8b6a-5e973b402501
0x1fffe000 linux_raid_member [raid]
LABEL: chimney:1
UUID: 15224a42-c25b-bcd9-15db-60004e5fe53a
# parted /dev/sda print
Model: ATA VBOX HARDDISK (scsi)
Disk /dev/sda: 34.4GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 538MB 537MB primary ext4 boot, raid
...
2) Again with metadata type 0.90 or 1.0 arrays blkid may report the
contained file system instead of an SWRaid member. Have a single
example of this configuration with a mirrored array containing the
/boot file system. Blkid reports one member as ext4 and the other as
SWRaid!
# blkid | egrep 'sd[ab]1'
/dev/sda1: UUID="10ab5f7d-7d8a-4171-8b6a-5e973b402501" TYPE="ext4" LABEL="chimney-boot"
/dev/sdb1: UUID="15224a42-c25b-bcd9-15db-60004e5fe53a" UUID_SUB="0a095e45-9360-1b17-0ad1-1fe369e22b98" LABEL="chimney:1" TYPE="linux_raid_member"
Bypassing the blkid cache gets the correct result.
# blkid -c /dev/null /dev/sda1
/dev/sda1: UUID="15224a42-c25b-bcd9-15db-60004e5fe53a" UUID_SUB="d0460f90-d11a-e80a-ee1c-3d104dae7e5d" LABEL="chimney:1" TYPE="linux_raid_member"
However this can't be used because if a user has a floppy configured
in the BIOS but no floppy attached, GParted will wait for minutes as
the kernel tries to access non-existent hardware on behalf of the
blkid query. See commit:
18f863151c
Fix long scan problem when BIOS floppy setting incorrect
3) Old versions of blkid don't recognise SWRaid members at all so always
report the file system when found. Occurs with blkid v1.0 on
RedHat / CentOS 5.
The only way I can see how to fix all these cases is to use the mdadm
command to query the configured arrays. Then use this information for
first choice when detecting partition content, making the order: SWRaid
members, libparted, blkid and internal.
GParted shell wrapper already creates temporary blank udev rules to
prevent Linux Software RAID arrays being automatically started when
GParted refreshes its device information[1]. However an administrator
could manually stop or start arrays or change their configuration
between refreshes so GParted must load this information every refresh.
On my desktop with 4 internal hard drives and 3 testing Linux Software
RAID arrays, running mdadm adds between 0.20 and 0.30 seconds to the
device refresh time.
[1] a255abf343
Prevent GParted starting stopped Linux Software RAID arrays (#709640)
Bug 756829 - SWRaid member detection enhancements
Embedded devices (Android) use GPT partition names to identify
partitions, instead of file system labels. Add support for viewing and
changing them.
As partition names are used to provide unique identification they are
never copied when copying the contents of one partition to another.
Note that GNU/Linux uses file system labels, UUIDs or device names for
identification during the boot process and afterwards so while partition
names can be used, they are optional and purely for user information.
Bug 741424 - Add support for GPT partition names
As part of bug 700228, the fat16 and fat32 code was combined. As a
result, the fat32.cc file no longer exists and hence is not available
for translation.
Only supports detection and creation of f2fs file systems. Requires
f2fs-tools and a blkid with f2fs support, util-linux > 2.22.2.
f2fs-tools v1.1.0 only supports file system creation.
Currently requires util-linux directly from the git repository as f2fs
support was only committed on 5 Feb 2013 and it has not yet been
released.
Closes Bug #695396 - Please apply f2fs patch
Cache results from querying all LVM2 PVs in one go to minimise the
number of times lvm commands are executed. Take inspiration from
caching performed by FS_Info and Proc_Partitions_Info.
Bug #160787 - lvm support
Add minimal support for just reporting the space usage of LVM2 PVs.
Accept libparted / blkid detection of LVM2 PVs first, falling back on
GParted's specific detection code otherwise. Maintain LVM not supported
warning message.
Bug #160787 - lvm support
Add the ability to set a new random UUID on file systems that provide
the appropriate tools to perform this action.
Update the help manual to include this new functionality. Also add
reference links to "setting a partition label" and "changing a
partition UUID" in the "copying and pasting a partition" section.
This patch does not include setting the UUID on an NTFS file system.
Bug #667278 - Add support for setting UUID
Bug #608308 - fix documentation - Copying and Pasting a Partition
- Removed gparted-disable-automount.fdi handling.
- Renamed gparted binary to gpartedbin to permit a calling script to be named gparted.
- Added new calling script gparted.in to permit using hal-lock to acuiqre device locks to prevent automounting while executing gpartedbin.
- Renamed gparted.desktop.in to gparted.desktop.in.in to permit parsing installdir.
svn path=/trunk/; revision=826
* src/GParted_Core: Replaced std::abs with llabs (see #357691)
* src/hfs.cc,
src/xfs.cc: added support for reading of volumelabel
* src/reiserfs.cc: added Fixme
* src/DialogManageFlags.cc: disabled resizing of this dialog
* include/DialogFeatures.h,
include/Makefile.am,
include/Win_GParted.h,
src/DialogFeatures.cc,
src/Makefile.am,
src/Win_GParted.cc: renamed 'Filesystems' to 'Features' in the
featuredialog to better reflect the actual functionality
* include/Dialog_Filesystems.h,
src/Dialog_Filesystems.cc: removed
* replaced the inline Utils functions with static functions.
This shaves a few kbytes (24 in fact) off the binary and is a bit
cleaner code-wise (imho).
* Harddisks without disklabel are now properly initizalized and shown in the menu. When one tries to create a new partition on
such a disk a dialog pops up with some blabla about disklabels and offers to create a disklabel. sweet :P (special thanks to mantiena-baltix
for bringing this issue to my attention)
* fixed minor annoyance with refreshing detailed deviceinfo after a 'deep refresh'
2004-09-23 Christian Rose <menthos@menthos.com>
* configure.in: Added "sv" to ALL_LINGUAS.
* po/.cvsignore: Added an entry.
* po/POTFILES.in: Added comment.
* po/sv.po: Added Swedish translation.
