The upload-pack command tries to avoid trusting the repository in which
it's run (e.g., by not running any hooks and not using any config that
contains arbitrary commands). But if the server side of a fetch or a
clone is a partial clone, then either upload-pack or its child
pack-objects may run a lazy "git fetch" under the hood. And it is very
easy to convince fetch to run arbitrary commands.
The "server" side can be a local repository owned by someone else, who
would be able to configure commands that are run during a clone with the
current user's permissions. This issue has been designated
CVE-2024-32004.
The fix in this commit's parent helps in this scenario, as well as in
related scenarios using SSH to clone, where the untrusted .git directory
is owned by a different user id. But if you received one as a zip file,
on a USB stick, etc, it may be owned by your user but still untrusted.
This has been designated CVE-2024-32465.
To mitigate the issue more completely, let's disable lazy fetching
entirely during `upload-pack`. While fetching from a partial repository
should be relatively rare, it is certainly not an unreasonable workflow.
And thus we need to provide an escape hatch.
This commit works by respecting a GIT_NO_LAZY_FETCH environment variable
(to skip the lazy-fetch), and setting it in upload-pack, but only when
the user has not already done so (which gives us the escape hatch).
The name of the variable is specifically chosen to match what has
already been added in 'master' via e6d5479e7a (git: extend
--no-lazy-fetch to work across subprocesses, 2024-02-27). Since we're
building this fix as a backport for older versions, we could cherry-pick
that patch and its earlier steps. However, we don't really need the
niceties (like a "--no-lazy-fetch" option) that it offers. By using the
same name, everything should just work when the two are eventually
merged, but here are a few notes:
- the blocking of the fetch in e6d5479e7a is incomplete! It sets
fetch_if_missing to 0 when we setup the repository variable, but
that isn't enough. pack-objects in particular will call
prefetch_to_pack() even if that variable is 0. This patch by
contrast checks the environment variable at the lowest level before
we call the lazy fetch, where we can be sure to catch all code
paths.
Possibly the setting of fetch_if_missing from e6d5479e7a can be
reverted, but it may be useful to have. For example, some code may
want to use that flag to change behavior before it gets to the point
of trying to start the fetch. At any rate, that's all outside the
scope of this patch.
- there's documentation for GIT_NO_LAZY_FETCH in e6d5479e7a. We can
live without that here, because for the most part the user shouldn't
need to set it themselves. The exception is if they do want to
override upload-pack's default, and that requires a separate
documentation section (which is added here)
- it would be nice to use the NO_LAZY_FETCH_ENVIRONMENT macro added by
e6d5479e7a, but those definitions have moved from cache.h to
environment.h between 2.39.3 and master. I just used the raw string
literals, and we can replace them with the macro once this topic is
merged to master.
At least with respect to CVE-2024-32004, this does render this commit's
parent commit somewhat redundant. However, it is worth retaining that
commit as defense in depth, and because it may help other issues (e.g.,
symlink/hardlink TOCTOU races, where zip files are not really an
interesting attack vector).
The tests in t0411 still pass, but now we have _two_ mechanisms ensuring
that the evil command is not run. Let's beef up the existing ones to
check that they failed for the expected reason, that we refused to run
upload-pack at all with an alternate user id. And add two new ones for
the same-user case that both the restriction and its escape hatch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In a partial clone, an attempt to read a missing object results in an
attempt to fetch that single object. In order to avoid multiple
sequential fetches, which would occur when multiple objects are missing
(which is the typical case), some commands have been taught to prefetch
in a batch: such a command would, in a partial clone, notice that
several objects that it will eventually need are missing, and call
promisor_remote_get_direct() with all such objects at once.
When this batch prefetch fails, these commands fall back to the
sequential fetches. But at $DAYJOB we have noticed that this results in
a bad user experience: a command would take unexpectedly long to finish
(and possibly use up a lot of bandwidth) if the batch prefetch would
fail for some intermittent reason, but all subsequent fetches would
work. It would be a better user experience for such a command would
just fail.
Therefore, make it a fatal error if the prefetch fails and at least one
object being fetched is known to be a promisor object. (The latter
criterion is to make sure that we are not misleading the user that such
an object would be present from the promisor remote. For example, a
missing object may be a result of repository corruption and not because
it is expectedly missing due to the repository being a partial clone.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No caller of promisor_remote_get_direct() is checking its return value,
so remove it.
Not checking the return value means that the user would not know
whether the failure of reading an object is due to the promisor remote
not supplying the object or because of local repository corruption, but
this will be fixed in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xcalloc(), imitating calloc(), takes "number of elements of the
array", and "size of a single element", in this order. A call that
does not follow this ordering has been corrected.
* sg/xcalloc-cocci-fix:
promisor-remote: fix xcalloc() argument order
Pass the number of elements first and their size second, as expected
by xcalloc().
Patch generated with:
make SPATCH_FLAGS=--recursive-includes contrib/coccinelle/xcalloc.cocci.patch
Our default SPATCH_FLAGS ('--all-includes') doesn't catch this
transformation by default, unless used in combination with a large-ish
SPATCH_BATCH_SIZE which happens to put 'promisor-remote.c' with a file
that includes 'repository.h' directly in the same batch.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename .env_array member to .env in the child_process structure.
* ab/env-array:
run-command API users: use "env" not "env_array" in comments & names
run-command API: rename "env_array" to "env"
Start following-up on the rename mentioned in c7c4bdeccf (run-command
API: remove "env" member, always use "env_array", 2021-11-25) of
"env_array" to "env".
The "env_array" name was picked in 19a583dc39 (run-command: add
env_array, an optional argv_array for env, 2014-10-19) because "env"
was taken. Let's not forever keep the oddity of "*_array" for this
"struct strvec", but not for its "args" sibling.
This commit is almost entirely made with a coccinelle rule[1]. The
only manual change here is in run-command.h to rename the struct
member itself and to change "env_array" to "env" in the
CHILD_PROCESS_INIT initializer.
The rest of this is all a result of applying [1]:
* make contrib/coccinelle/run_command.cocci.patch
* patch -p1 <contrib/coccinelle/run_command.cocci.patch
* git add -u
1. cat contrib/coccinelle/run_command.pending.cocci
@@
struct child_process E;
@@
- E.env_array
+ E.env
@@
struct child_process *E;
@@
- E->env_array
+ E->env
I've avoided changing any comments and derived variable names here,
that will all be done in the next commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare the internals for lazily fetching objects in submodules
from their promisor remotes.
* jt/partial-clone-submodule-1:
promisor-remote: teach lazy-fetch in any repo
run-command: refactor subprocess env preparation
submodule: refrain from filtering GIT_CONFIG_COUNT
promisor-remote: support per-repository config
repository: move global r_f_p_c to repo struct
This is one step towards supporting partial clone submodules.
Even after this patch, we will still lack partial clone submodules
support, primarily because a lot of Git code that accesses submodule
objects does so by adding their object stores as alternates, meaning
that any lazy fetches that would occur in the submodule would be done
based on the config of the superproject, not of the submodule. This also
prevents testing of the functionality in this patch by user-facing
commands. So for now, test this mechanism using a test helper.
Besides that, there is some code that uses the wrapper functions
like has_promisor_remote(). Those will need to be checked to see if they
could support the non-wrapper functions instead (and thus support any
repository, not just the_repository).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using global variables to store promisor remote information,
store this config in struct repository instead, and add
repository-agnostic non-static functions corresponding to the existing
non-static functions that only work on the_repository.
The actual lazy-fetching of missing objects currently does not work on
repositories other than the_repository, and will still not work after
this commit, so add a BUG message explaining this. A subsequent commit
will remove this limitation.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move repository_format_partial_clone, which is currently a global
variable, into struct repository. (Full support for per-repository
partial clone config will be done in a subsequent commit - this is split
into its own commit because of the extent of the changes needed.)
The new repo-specific variable cannot be set in
check_repository_format_gently() (as is currently), because that
function does not know which repo it is operating on (or even whether
the value is important); therefore this responsibility is delegated to
the outermost caller that knows. Of all the outermost callers that know
(found by looking at all functions that call clear_repository_format()),
I looked at those that either read from the main Git directory or write
into a struct repository. These callers have been modified accordingly
(write to the_repository in the former case and write to the given
struct repository in the latter case).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable core_partial_clone_filter_default has been unused since
fa3d1b63e8 ("promisor-remote: parse remote.*.partialclonefilter",
2019-06-25), when Git was changed to refer to
remote.*.partialclonefilter as the default filter when fetching in a
partial clone, but (perhaps inadvertently) there was no fallback to
core.partialclonefilter.
One alternative is to add the fallback, but the aforementioned change
was made more than a year ago and I have not heard of any complaints
regarding this matter. In addition, there is currently no mention of
core.partialclonefilter in the user documentation. So it seems best to
reaffirm that Git will only support remote.*.partialclonefilter.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach Git to lazy-fetch missing objects in a subprocess instead of doing
it in-process. This allows any fatal errors that occur during the fetch
to be isolated and converted into an error return value, instead of
causing the current command being run to terminate.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff" in a partial clone learned to avoid lazy loading blob
objects in more casese when they are not needed.
* jt/avoid-prefetch-when-able-in-diff:
diff: restrict when prefetching occurs
diff: refactor object read
diff: make diff_populate_filespec_options struct
promisor-remote: accept 0 as oid_nr in function
We return the length to a subset of a string using an "int *"
out-parameter. This is fine most of the time, as we'd expect config keys
to be relatively short, but it could behave oddly if we had a gigantic
config key. A more appropriate type is size_t.
Let's switch over, which lets our callers use size_t as appropriate
(they are bound by our type because they must pass the out-parameter as
a pointer). This is mostly just a cleanup to make it clear this code
handles long strings correctly. In practice, our config parser already
chokes on long key names (because of a similar int/size_t mixup!).
When doing an int/size_t conversion, we have to be careful that nobody
was trying to assign a negative value to the variable. I manually
confirmed that for each case here. They tend to just feed the result to
xmemdupz() or similar; in a few cases I adjusted the parameter types for
helper functions to make sure the size_t is preserved.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are 3 callers to promisor_remote_get_direct() that first check if
the number of objects to be fetched is equal to 0. Fold that check into
promisor_remote_get_direct(), and in doing so, be explicit as to what
promisor_remote_get_direct() does if oid_nr is 0 (it returns 0, success,
immediately).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6462d5eb9a ("fetch: remove fetch_if_missing=0", 2019-11-08)
strove to remove the need for fetch_if_missing=0 from the fetching
mechanism, so it is plausible to attempt removing fetch_if_missing=0
from the lazy-fetching mechanism in promisor-remote as well.
But doing so reveals a bug - when the server does not send an object
pointed to by a tag object, an infinite loop occurs: Git attempts to
fetch the missing object, which causes a deferencing of all refs (for
negotiation), which causes a lazy fetch of that missing object, and so
on. This bug is because of unnecessary use of the fetch negotiator
during lazy fetching - it is not used after initialization, but it is
still initialized (which causes the dereferencing of all refs).
Thus, when the negotiator is not used during fetching, refrain from
initializing it. Then, remove fetch_if_missing from promisor-remote.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, when promisor_remote_move_to_tail() is called for a
promisor_remote which is currently the final element in promisors, a
cycle is created in the promisors linked list. This cycle leads to a
double free later on in promisor_remote_clear() when the final element
of the promisors list is removed: promisors is set to promisors->next (a
no-op, as promisors->next == promisors); the previous value of promisors
is free()'d; then the new value of promisors (which is equal to the
previous value of promisors) is also free()'d. This double-free error
was unrecoverable for the user without removing the filter or re-cloning
the repo and hoping to miss this edge case.
Now, when promisor_remote_move_to_tail() would be a no-op, just do a
no-op. In cases of promisor_remote_move_to_tail() where r is not already
at the tail of the list, it works as before.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Acked-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we can have a different default partial clone filter for
each promisor remote, let's hide core_partial_clone_filter_default
as a static in promisor-remote.c to avoid it being use for
anything other than managing backward compatibility.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have has_promisor_remote() and can use many
promisor remotes, let's hide repository_format_partial_clone
as a static in promisor-remote.c to avoid it being use
for anything other than managing backward compatibility.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As fetch_objects() is now used only in promisor-remote.c
and should't be used outside it, let's move it into
promisor-remote.c, make it static there, and remove
fetch-object.{c,h}.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it possible to specify a different partial clone
filter for each promisor remote.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A remote specified using the extensions.partialClone config
option should be considered a promisor remote too.
For simplicity and to make things predictable, this promisor
remote should be either always the last one we try to get
objects from, or the first one. So it should always be either
at the end of the promisor remote list, or at its start.
We decided to make it the last one we try, because it is
likely that someone using many promisor remotes is doing so
because the other promisor remotes are better for some reason
(maybe they are closer or faster for some kind of objects)
than the origin, and the origin is likely to be the remote
specified by extensions.partialClone.
This justification is not very strong, but one choice had to
be made, and anyway the long term plan should be to make the
order somehow fully configurable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will need to reinitialize the promisor remote configuration
as we will make some changes to it in a later commit.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is implemented for now by calling fetch_objects(). It fetches
from all the promisor remotes.
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Helped-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The promisor-remote.{c,h} files will contain functions to
manage many promisor remotes.
We expect that there will not be a lot of promisor remotes,
so it is ok to use a simple linked list to manage them.
Helped-by: Jeff King <peff@peff.net>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>