In 0060fd1511 (clone --recurse-submodules: prevent name squatting on
Windows, 2019-09-12), I introduced code to verify that a git dir either
does not exist, or is at least empty, to fend off attacks where an
inadvertently (and likely maliciously) pre-populated git dir would be
used while cloning submodules recursively.
The logic used `access(<path>, X_OK)` to verify that a directory exists
before calling `is_empty_dir()` on it. That is a curious way to check
for a directory's existence and might well fail for unwanted reasons.
Even the original author (it was I ;-) ) struggles to explain why this
function was used rather than `stat()`.
This code was _almost_ copypastad in the previous commit, but that
`access()` call was caught during review.
Let's use `stat()` instead also in the code that was almost copied
verbatim. Let's not use `lstat()` because in the unlikely event that
somebody snuck a symbolic link in, pointing to a crafted directory, we
want to verify that that directory is empty.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When creating a submodule path, we must be careful not to follow
symbolic links. Otherwise we may follow a symbolic link pointing to
a gitdir (which are valid symbolic links!) e.g. while cloning.
On case-insensitive filesystems, however, we blindly replace a directory
that has been created as part of the `clone` operation with a symlink
when the path to the latter differs only in case from the former's path.
Let's simply avoid this situation by expecting not ever having to
overwrite any existing file/directory/symlink upon cloning. That way, we
won't even replace a directory that we just created.
This addresses CVE-2024-32002.
Reported-by: Filip Hejsek <filip.hejsek@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
While it is expected to have several git dirs within the `.git/modules/`
tree, it is important that they do not interfere with each other. For
example, if one submodule was called "captain" and another submodule
"captain/hooks", their respective git dirs would clash, as they would be
located in `.git/modules/captain/` and `.git/modules/captain/hooks/`,
respectively, i.e. the latter's files could clash with the actual Git
hooks of the former.
To prevent these clashes, and in particular to prevent hooks from being
written and then executed as part of a recursive clone, we introduced
checks as part of the fix for CVE-2019-1387 in a8dee3ca61 (Disallow
dubiously-nested submodule git directories, 2019-10-01).
It is currently possible to bypass the check for clashing submodule
git dirs in two ways:
1. parallel cloning
2. checkout --recurse-submodules
Let's check not only before, but also after parallel cloning (and before
checking out the submodule), that the git dir is not clashing with
another one, otherwise fail. This addresses the parallel cloning issue.
As to the parallel checkout issue: It requires quite a few manual steps
to create clashing git dirs because Git itself would refuse to
initialize the inner one, as demonstrated by the test case.
Nevertheless, let's teach the recursive checkout (namely, the
`submodule_move_head()` function that is used by the recursive checkout)
to be careful to verify that it does not use a clashing git dir, and if
it does, disable it (by deleting the `HEAD` file so that subsequent Git
calls won't recognize it as a git dir anymore).
Note: The parallel cloning test case contains a `cat err` that proved to
be highly useful when analyzing the racy nature of the operation (the
operation can fail with three different error messages, depending on
timing), and was left on purpose to ease future debugging should the
need arise.
Signed-off-by: Filip Hejsek <filip.hejsek@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Submodule operations must not follow symlinks in working tree, because
otherwise files might be written to unintended places, leading to
vulnerabilities.
Signed-off-by: Filip Hejsek <filip.hejsek@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
There is a bug in directory/file ("D/F") conflict checking optimization:
It assumes that such a conflict cannot happen if a newly added entry's
path is lexicgraphically "greater than" the last already-existing index
entry _and_ contains a directory separator that comes strictly after the
common prefix (`len > len_eq_offset`).
This assumption is incorrect, though: `a-` sorts _between_ `a` and
`a/b`, their common prefix is `a`, the slash comes after the common
prefix, and there is still a file/directory conflict.
Let's re-design this logic, taking these facts into consideration:
- It is impossible for a file to sort after another file with whose
directory it conflicts because the trailing NUL byte is always smaller
than any other character.
- Since there are quite a number of ASCII characters that sort before
the slash (e.g. `-`, `.`, the space character), looking at the last
already-existing index entry is not enough to determine whether there
is a D/F conflict when the first character different from the
existing last index entry's path is a slash.
If it is not a slash, there cannot be a file/directory conflict.
And if the existing index entry's first different character is a
slash, it also cannot be a file/directory conflict because the
optimization requires the newly-added entry's path to sort _after_ the
existing entry's, and the conflicting file's path would not.
So let's fall back to the regular binary search whenever the newly-added
item's path differs in a slash character. If it does not, and it sorts
after the last index entry, there is no D/F conflict and the new index
entry can be safely appended.
This fix also nicely simplifies the logic and makes it much easier to
reason about, while the impact on performance should be negligible:
After this fix, the optimization will be skipped only when index
entry's paths differ in a slash and a space, `!`, `"`, `#`, `$`,
`%`, `&`, `'`, | ( `)`, `*`, `+`, `,`, `-`, or `.`, which should
be a rare situation.
Signed-off-by: Filip Hejsek <filip.hejsek@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
For a long time our general philosophy has been that it's unsafe to run
arbitrary Git commands if you don't trust the hooks or config in .git,
but that running upload-pack should be OK. E.g., see 1456b043fc (Remove
post-upload-hook, 2009-12-10), or the design of uploadpack.packObjectsHook.
But we never really documented this (and even the discussions that led
to 1456b043fc were not on the public list!). Let's try to make our
approach more clear, but also be realistic that even upload-pack carries
some risk.
Helped-by: Filip Hejsek <filip.hejsek@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The upload-pack command tries to avoid trusting the repository in which
it's run (e.g., by not running any hooks and not using any config that
contains arbitrary commands). But if the server side of a fetch or a
clone is a partial clone, then either upload-pack or its child
pack-objects may run a lazy "git fetch" under the hood. And it is very
easy to convince fetch to run arbitrary commands.
The "server" side can be a local repository owned by someone else, who
would be able to configure commands that are run during a clone with the
current user's permissions. This issue has been designated
CVE-2024-32004.
The fix in this commit's parent helps in this scenario, as well as in
related scenarios using SSH to clone, where the untrusted .git directory
is owned by a different user id. But if you received one as a zip file,
on a USB stick, etc, it may be owned by your user but still untrusted.
This has been designated CVE-2024-32465.
To mitigate the issue more completely, let's disable lazy fetching
entirely during `upload-pack`. While fetching from a partial repository
should be relatively rare, it is certainly not an unreasonable workflow.
And thus we need to provide an escape hatch.
This commit works by respecting a GIT_NO_LAZY_FETCH environment variable
(to skip the lazy-fetch), and setting it in upload-pack, but only when
the user has not already done so (which gives us the escape hatch).
The name of the variable is specifically chosen to match what has
already been added in 'master' via e6d5479e7a (git: extend
--no-lazy-fetch to work across subprocesses, 2024-02-27). Since we're
building this fix as a backport for older versions, we could cherry-pick
that patch and its earlier steps. However, we don't really need the
niceties (like a "--no-lazy-fetch" option) that it offers. By using the
same name, everything should just work when the two are eventually
merged, but here are a few notes:
- the blocking of the fetch in e6d5479e7a is incomplete! It sets
fetch_if_missing to 0 when we setup the repository variable, but
that isn't enough. pack-objects in particular will call
prefetch_to_pack() even if that variable is 0. This patch by
contrast checks the environment variable at the lowest level before
we call the lazy fetch, where we can be sure to catch all code
paths.
Possibly the setting of fetch_if_missing from e6d5479e7a can be
reverted, but it may be useful to have. For example, some code may
want to use that flag to change behavior before it gets to the point
of trying to start the fetch. At any rate, that's all outside the
scope of this patch.
- there's documentation for GIT_NO_LAZY_FETCH in e6d5479e7a. We can
live without that here, because for the most part the user shouldn't
need to set it themselves. The exception is if they do want to
override upload-pack's default, and that requires a separate
documentation section (which is added here)
- it would be nice to use the NO_LAZY_FETCH_ENVIRONMENT macro added by
e6d5479e7a, but those definitions have moved from cache.h to
environment.h between 2.39.3 and master. I just used the raw string
literals, and we can replace them with the macro once this topic is
merged to master.
At least with respect to CVE-2024-32004, this does render this commit's
parent commit somewhat redundant. However, it is worth retaining that
commit as defense in depth, and because it may help other issues (e.g.,
symlink/hardlink TOCTOU races, where zip files are not really an
interesting attack vector).
The tests in t0411 still pass, but now we have _two_ mechanisms ensuring
that the evil command is not run. Let's beef up the existing ones to
check that they failed for the expected reason, that we refused to run
upload-pack at all with an alternate user id. And add two new ones for
the same-user case that both the restriction and its escape hatch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When cloning from somebody else's repositories, it is possible that,
say, the `upload-pack` command is overridden in the repository that is
about to be cloned, which would then be run in the user's context who
started the clone.
To remind the user that this is a potentially unsafe operation, let's
extend the ownership checks we have already established for regular
gitdir discovery to extend also to local repositories that are about to
be cloned.
This protection extends also to file:// URLs.
The fixes in this commit address CVE-2024-32004.
Note: This commit does not touch the `fetch`/`clone` code directly, but
instead the function used implicitly by both: `enter_repo()`. This
function is also used by `git receive-pack` (i.e. pushes), by `git
upload-archive`, by `git daemon` and by `git http-backend`. In setups
that want to serve repositories owned by different users than the
account running the service, this will require `safe.*` settings to be
configured accordingly.
Also note: there are tiny time windows where a time-of-check-time-of-use
("TOCTOU") race is possible. The real solution to those would be to work
with `fstat()` and `openat()`. However, the latter function is not
available on Windows (and would have to be emulated with rather
expensive low-level `NtCreateFile()` calls), and the changes would be
quite extensive, for my taste too extensive for the little gain given
that embargoed releases need to pay extra attention to avoid introducing
inadvertent bugs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Cloning from a partial repository must not fetch missing objects into
the partial repository, because that can lead to arbitrary code
execution.
Add a couple of test cases, pretending to the `upload-pack` command (and
to that command only) that it is working on a repository owned by
someone else.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Filip Hejsek <filip.hejsek@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Update remaining GitHub Actions jobs to avoid warnings against
using deprecated version of Node.js.
* js/github-actions-update:
ci(linux32): add a note about Actions that must not be updated
ci: bump remaining outdated Actions versions
With this backport, `maint-2.39`'s CI builds are finally healthy again.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
* jc/maint-github-actions-update:
GitHub Actions: update to github-script@v7
GitHub Actions: update to checkout@v4
Yet another thing to help `maint-2.39`'s CI builds to become healthy
again.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
The Docker container used by the `linux32` job comes without Node.js,
and therefore the `actions/checkout` and `actions/upload-artifact`
Actions cannot be upgraded to the latest versions (because they use
Node.js).
One time too many, I accidentally tried to update them, where
`actions/checkout` at least fails immediately, but the
`actions/upload-artifact` step is only used when any test fails, and
therefore the CI run usually passes even though that Action was updated
to a version that is incompatible with the Docker container in which
this job runs.
So let's add a big fat warning, mainly for my own benefit, to avoid
running into the very same issue over and over again.
Backported-from: 20e0ff8835 (ci(linux32): add a note about Actions that must not be updated, 2024-02-11)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We seem to be getting "Node.js 16 actions are deprecated." warnings
for jobs that use github-script@v6. Update to github-script@v7,
which is said to use Node.js 20.
Backported-from: c4ddbe043e (GitHub Actions: update to github-script@v7, 2024-02-02)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
After activating automatic Dependabot updates in the
git-for-windows/git repository, Dependabot noticed a couple
of yet-unaddressed updates. They avoid "Node.js 16 Actions"
deprecation messages by bumping the following Actions'
versions:
- actions/upload-artifact from 3 to 4
- actions/download-artifact from 3 to 4
- actions/cache from 3 to 4
Backported-from: 820a340085 (ci: bump remaining outdated Actions versions, 2024-02-11)
Helped-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We seem to be getting "Node.js 16 actions are deprecated." warnings
for jobs that use checkout@v3. Except for the i686 containers job
that is kept at checkout@v1 [*], update to checkout@v4, which is
said to use Node.js 20.
[*] 6cf4d908 (ci(main): upgrade actions/checkout to v3, 2022-12-05)
refers to https://github.com/actions/runner/issues/2115 and
explains why container jobs are kept at checkout@v1. We may
want to check the current status of the issue and move it to the
same version as other jobs, but that is outside the scope of
this step.
Backported-from: e94dec0c1d (GitHub Actions: update to checkout@v4, 2024-02-02)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tests with LSan from time to time seem to emit harmless message
that makes our tests unnecessarily flakey; we work it around by
filtering the uninteresting output.
* jk/test-lsan-denoise-output:
test-lib: ignore uninteresting LSan output
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Replace macos-12 used at GitHub CI with macos-13.
* js/ci-use-macos-13:
ci: upgrade to using macos-13
This is another backport to `maint-2.39` to allow less CI jobs to break.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Fix was added to work around a regression in libcURL 8.7.0 (which has
already been fixed in their tip of the tree).
* jk/libcurl-8.7-regression-workaround:
remote-curl: add Transfer-Encoding header only for older curl
INSTALL: bump libcurl version to 7.21.3
http: reset POSTFIELDSIZE when clearing curl handle
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
HTTP Header redaction code has been adjusted for a newer version of
cURL library that shows its traces differently from earlier
versions.
* jk/redact-h2h3-headers-fix:
http: update curl http/2 info matching for curl 8.3.0
http: factor out matching of curl http/2 trace lines
This backport to `maint-2.39` is needed to bring the following test
cases back to a working state in conjunction with recent libcurl
versions:
- t5559.17 GIT_TRACE_CURL redacts auth details
- t5559.18 GIT_CURL_VERBOSE redacts auth details
- t5559.38 cookies are redacted by default
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Test update.
* jk/httpd-test-updates:
t/lib-httpd: increase ssl key size to 2048 bits
t/lib-httpd: drop SSLMutex config
t/lib-httpd: bump required apache version to 2.4
t/lib-httpd: bump required apache version to 2.2
This is a backport onto the `maint-2.39` branch, to improve the CI
health of that branch.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Various fix-ups on HTTP tests.
* jk/http-test-fixes:
t5559: make SSL/TLS the default
t5559: fix test failures with LIB_HTTPD_SSL
t/lib-httpd: enable HTTP/2 "h2" protocol, not just h2c
t/lib-httpd: respect $HTTPD_PROTO in expect_askpass()
t5551: drop curl trace lines without headers
t5551: handle v2 protocol in cookie test
t5551: simplify expected cookie file
t5551: handle v2 protocol in upload-pack service test
t5551: handle v2 protocol when checking curl trace
t5551: stop forcing clone to run with v0 protocol
t5551: handle HTTP/2 when checking curl trace
t5551: lower-case headers in expected curl trace
t5551: drop redundant grep for Accept-Language
t5541: simplify and move "no empty path components" test
t5541: stop marking "used receive-pack service" test as v0 only
t5541: run "used receive-pack service" test earlier
This is a backport onto the `maint-2.39` branch, starting to take care
of making that branch's CI builds healthy again.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Every once in a while, the `git-p4` tests flake for reasons outside of
our control. It typically fails with "Connection refused" e.g. here:
https://github.com/git/git/actions/runs/5969707156/job/16196057724
[...]
+ git p4 clone --dest=/home/runner/work/git/git/t/trash directory.t9807-git-p4-submit/git //depot
Initialized empty Git repository in /home/runner/work/git/git/t/trash directory.t9807-git-p4-submit/git/.git/
Perforce client error:
Connect to server failed; check $P4PORT.
TCP connect to localhost:9807 failed.
connect: 127.0.0.1:9807: Connection refused
failure accessing depot: could not run p4
Importing from //depot into /home/runner/work/git/git/t/trash directory.t9807-git-p4-submit/git
[...]
This happens in other jobs, too, but in the `linux-asan`/`linux-ubsan`
jobs it hurts the most because those jobs often take an _awfully_ long
time to run, therefore re-running a failed `linux-asan`/`linux-ubsan`
jobs is _very_ costly.
The purpose of the `linux-asan`/`linux-ubsan` jobs is to exercise the C
code of Git, anyway, and any part of Git's source code that the `git-p4`
tests run and that would benefit from the attention of ASAN/UBSAN are
run better in other tests anyway, as debugging C code run via Python
scripts can get a bit hairy.
In fact, it is not even just `git-p4` that is the problem (even if it
flakes often enough to be problematic in the CI builds), but really the
part about Python scripts. So let's just skip any Python parts of the
tests from being run in that job.
For good measure, also skip the Subversion tests because debugging C
code run via Perl scripts is as much fun as debugging C code run via
Python scripts. And it will reduce the time this very expensive job
takes, which is a big benefit.
Backported to `maint-2.39` as another step to get that branch's CI
builds back to a healthy state.
Backported-from: 6ba913629f (ci(linux-asan-ubsan): let's save some time, 2023-08-29)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When I run the tests in leak-checking mode the same way our CI job does,
like:
make SANITIZE=leak \
GIT_TEST_PASSING_SANITIZE_LEAK=true \
GIT_TEST_SANITIZE_LEAK_LOG=true \
test
then LSan can racily produce useless entries in the log files that look
like this:
==git==3034393==Unable to get registers from thread 3034307.
I think they're mostly harmless based on the source here:
7e0a52e8e9/compiler-rt/lib/lsan/lsan_common.cpp (L414)
which reads:
PtraceRegistersStatus have_registers =
suspended_threads.GetRegistersAndSP(i, ®isters, &sp);
if (have_registers != REGISTERS_AVAILABLE) {
Report("Unable to get registers from thread %llu.\n", os_id);
// If unable to get SP, consider the entire stack to be reachable unless
// GetRegistersAndSP failed with ESRCH.
if (have_registers == REGISTERS_UNAVAILABLE_FATAL)
continue;
sp = stack_begin;
}
The program itself still runs fine and LSan doesn't cause us to abort.
But test-lib.sh looks for any non-empty LSan logs and marks the test as
a failure anyway, under the assumption that we simply missed the failing
exit code somehow.
I don't think I've ever seen this happen in the CI job, but running
locally using clang-14 on an 8-core machine, I can't seem to make it
through a full run of the test suite without having at least one
failure. And it's a different one every time (though they do seem to
often be related to packing tests, which makes sense, since that is one
of our biggest users of threaded code).
We can hack around this by only counting LSan log files that contain a
line that doesn't match our known-uninteresting pattern.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In April, GitHub announced that the `macos-13` pool is available:
https://github.blog/changelog/2023-04-24-github-actions-macos-13-is-now-available/.
It is only a matter of time until the `macos-12` pool is going away,
therefore we should switch now, without pressure of a looming deadline.
Since the `macos-13` runners no longer include Python2, we also drop
specifically testing with Python2 and switch uniformly to Python3, see
https://github.com/actions/runner-images/blob/HEAD/images/macos/macos-13-Readme.md
for details about the software available on the `macos-13` pool's
runners.
Also, on macOS 13, Homebrew seems to install a `gcc@9` package that no
longer comes with a regular `unistd.h` (there seems only to be a
`ssp/unistd.h`), and hence builds would fail with:
In file included from base85.c:1:
git-compat-util.h:223:10: fatal error: unistd.h: No such file or directory
223 | #include <unistd.h>
| ^~~~~~~~~~
compilation terminated.
The reason why we install GCC v9.x explicitly is historical, and back in
the days it was because it was the _newest_ version available via
Homebrew: 176441bfb5 (ci: build Git with GCC 9 in the 'osx-gcc' build
job, 2019-11-27).
To reinstate the spirit of that commit _and_ to fix that build failure,
let's switch to the now-newest GCC version: v13.x.
Backported-from: 682a868f67 (ci: upgrade to using macos-13, 2023-11-03)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Stop using deprecated macOS API in fsmonitor.
* jh/fsmonitor-darwin-modernize:
fsmonitor: eliminate call to deprecated FSEventStream function
This backport to `maint-2.39` is needed to be able to build on
`macos-13`, which we need to update to as we restore the CI health of
that branch.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
As of curl 7.66.0, we don't need to manually specify a "chunked"
Transfer-Encoding header. Instead, modern curl deduces the need for it
in a POST that has a POSTFIELDSIZE of -1 and uses READFUNCTION rather
than POSTFIELDS.
That version is recent enough that we can't just drop the header; we
need to do so conditionally. Since it's only a single line, it seems
like the simplest thing would just be to keep setting it unconditionally
(after all, the #ifdefs are much longer than the actual code). But
there's another wrinkle: HTTP/2.
Curl may choose to use HTTP/2 under the hood if the server supports it.
And in that protocol, we do not use the chunked encoding for streaming
at all. Most versions of curl handle this just fine by recognizing and
removing the header. But there's a regression in curl 8.7.0 and 8.7.1
where it doesn't, and large requests over HTTP/2 are broken (which t5559
notices). That regression has since been fixed upstream, but not yet
released.
Make the setting of this header conditional, which will let Git work
even with those buggy curl versions. And as a bonus, it serves as a
reminder that we can eventually clean up the code as we bump the
supported curl versions.
This is a backport of 92a209bf24 (remote-curl: add Transfer-Encoding
header only for older curl, 2024-04-05) into the `maint-2.39` branch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Our documentation claims we support curl versions back to 7.19.5. But we
can no longer compile with that version since adding an unconditional
use of CURLOPT_RESOLVE in 511cfd3bff (http: add custom hostname to IP
address resolutions, 2022-05-16). That feature wasn't added to libcurl
until 7.21.3.
We could add #ifdefs to make this work back to 7.19.5. But given that
nobody noticed the compilation failure in the intervening two years, it
makes more sense to bump the version in the documentation to 7.21.3
(which is itself over 13 years old).
We could perhaps go forward even more (which would let us drop some
cruft from git-curl-compat.h), but this should be an obviously safe
jump, and we can move forward later.
Note that user-visible syntax for CURLOPT_RESOLVE has grown new features
in subsequent curl versions. Our documentation mentions "+" and "-"
entries, which require more recent versions than 7.21.3. We could
perhaps clarify that in our docs, but it's probably not worth cluttering
them with restrictions of ancient curl versions.
This is a backport of c28ee09503 (INSTALL: bump libcurl version to
7.21.3, 2024-04-02) into the `maint-2.39` branch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In get_active_slot(), we return a CURL handle that may have been used
before (reusing them is good because it lets curl reuse the same
connection across many requests). We set a few curl options back to
defaults that may have been modified by previous requests.
We reset POSTFIELDS to NULL, but do not reset POSTFIELDSIZE (which
defaults to "-1"). This usually doesn't matter because most POSTs will
set both fields together anyway. But there is one exception: when
handling a large request in remote-curl's post_rpc(), we don't set
_either_, and instead set a READFUNCTION to stream data into libcurl.
This can interact weirdly with a stale POSTFIELDSIZE setting, because
curl will assume it should read only some set number of bytes from our
READFUNCTION. However, it has worked in practice because we also
manually set a "Transfer-Encoding: chunked" header, which libcurl uses
as a clue to set the POSTFIELDSIZE to -1 itself.
So everything works, but we're better off resetting the size manually
for a few reasons:
- there was a regression in curl 8.7.0 where the chunked header
detection didn't kick in, causing any large HTTP requests made by
Git to fail. This has since been fixed (but not yet released). In
the issue, curl folks recommended setting it explicitly to -1:
https://github.com/curl/curl/issues/13229#issuecomment-2029826058
and it indeed works around the regression. So even though it won't
be strictly necessary after the fix there, this will help folks who
end up using the affected libcurl versions.
- it's consistent with what a new curl handle would look like. Since
get_active_slot() may or may not return a used handle, this reduces
the possibility of heisenbugs that only appear with certain request
patterns.
Note that the recommendation in the curl issue is to actually drop the
manual Transfer-Encoding header. Modern libcurl will add the header
itself when streaming from a READFUNCTION. However, that code wasn't
added until 802aa5ae2 (HTTP: use chunked Transfer-Encoding for HTTP_POST
if size unknown, 2019-07-22), which is in curl 7.66.0. We claim to
support back to 7.19.5, so those older versions still need the manual
header.
This is a backport of 3242311742 (http: reset POSTFIELDSIZE when
clearing curl handle, 2024-04-02) into the `maint-2.39` branch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To redact header lines in http/2 curl traces, we have to parse past some
prefix bytes that curl sticks in the info lines it passes to us. That
changed once already, and we adapted in db30130165 (http: handle both
"h2" and "h2h3" in curl info lines, 2023-06-17).
Now it has changed again, in curl's fbacb14c4 (http2: cleanup trace
messages, 2023-08-04), which was released in curl 8.3.0. Running a build
of git linked against that version will fail to redact the trace (and as
before, t5559 notices and complains).
The format here is a little more complicated than the other ones, as it
now includes a "stream id". This is not constant but is always numeric,
so we can easily parse past it.
We'll continue to match the old versions, of course, since we want to
work with many different versions of curl. We can't even select one
format at compile time, because the behavior depends on the runtime
version of curl we use, not the version we build against.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have to parse out curl's http/2 trace lines so we can redact their
headers. We already match two different types of lines from various
vintages of curl. In preparation for adding another (which will be
slightly more complex), let's pull the matching into its own function,
rather than doing it in the middle of a conditional.
While we're doing so, let's expand the comment a bit to describe the two
matches. That probably should have been part of db30130165 (http: handle
both "h2" and "h2h3" in curl info lines, 2023-06-17), but will become
even more important as we add new types.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When redacting auth tokens in trace output from curl, we look for http/2
headers of the form "h2h3 [header: value]". This comes from b637a41ebe
(http: redact curl h2h3 headers in info, 2022-11-11).
But the "h2h3" prefix changed to just "h2" in curl's fc2f1e547 (http2:
support HTTP/2 to forward proxies, non-tunneling, 2023-04-14). That's in
released version curl 8.1.0; linking against that version means we'll
fail to correctly redact the trace. Our t5559.17 notices and fails.
We can fix this by matching either prefix, which should handle both old
and new versions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.38: (32 commits)
Git 2.38.5
Git 2.37.7
Git 2.36.6
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
...
* maint-2.37: (31 commits)
Git 2.37.7
Git 2.36.6
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
...
* maint-2.36: (30 commits)
Git 2.36.6
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
...
* maint-2.35: (29 commits)
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
...
* maint-2.34: (28 commits)
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
...
* maint-2.33: (27 commits)
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
...
* maint-2.32: (26 commits)
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
ci: install python on ubuntu
...
* maint-2.31: (25 commits)
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
ci: install python on ubuntu
ci: use the same version of p4 on both Linux and macOS
...
Since `test_i18ncmp` was deprecated in v2.31.*, the instances added in
v2.30.9 needed to be converted to `test_cmp` calls.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
