The `check_write()` function verifies that we do not try to write to a
config source that cannot be written to, like for example stdin. But
while the new subcommands do call this function, they do so before
calling `handle_config_location()`. Consequently, we only end up
checking the default config location for writeability, not the location
that was actually specified by the caller of git-config(1).
Fix this by calling `check_write()` after `handle_config_location()`. We
will further clarify the relationship between those two functions in a
subsequent commit where we remove the global state that both implicitly
rely on.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only use actions in the legacy mode. Convert them to an enum and move
them into `cmd_config_actions()` to clearly demonstrate that they are
not used anywhere else.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the legacy options as well some of the variables it references into
`cmd_config_action()`. This reduces our reliance on global state.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the subcommand options as well as the `subcommand` variable into
`cmd_config()`. This reduces our reliance on global state.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `cmd_config()` we first try to parse the provided arguments as
subcommands and, if this is successful, call the respective functions
of that subcommand. Otherwise we continue with the "legacy" mode that
uses implicit actions and/or flags.
Disentangle this by moving the legacy mode into its own function. This
allows us to move the options into the respective functions and clearly
separates concerns.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When invoking git-config(1) with a wrong set of arguments we end up
calling `usage_builtin_config()` after printing an error message that
says what was wrong. As that function ends up printing the full list of
options, which is quite long, the actual error message will be buried by
a wall of text. This makes it really hard to figure out what exactly
caused the error.
Furthermore, now that we have recently introduced subcommands, the usage
information may actually be misleading as we unconditionally print
options of the subcommand-less mode.
Fix both of these issues by just not printing the options at all
anymore. Instead, we call `usage()` that makes us report in a single
line what has gone wrong. This should be way more discoverable for our
users and addresses the inconsistency.
Furthermore, this change allow us to inline the options into the
respective functions that use them to parse the command line.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The color parsing code learned to handle 12-bit RGB colors, spelled
as "#RGB" (in addition to "#RRGGBB" that is already supported).
* bb/rgb-12-bit-colors:
color: add support for 12-bit RGB colors
t/t4026-color: add test coverage for invalid RGB colors
t/t4026-color: remove an extra double quote character
Command line completion support for zsh (in contrib/) has been
updated to stop exposing internal state to end-user shell
interaction.
* dk/zsh-git-repo-path-fix:
completion: zsh: stop leaking local cache variable
zsh can pretend to be a normal shell pretty well except for some
glitches that we tickle in some of our scripts. Work them around
so that "vimdiff" and our test suite works well enough with it.
* bc/zsh-compatibility:
vimdiff: make script and tests work with zsh
t4046: avoid continue in &&-chain for zsh
When the user responds to a prompt given by "git add -p" with an
unsupported command, list of available commands were given, which
was too much if the user knew what they wanted to type but merely
made a typo. Now the user gets a much shorter error message.
* rj/add-p-typo-reaction:
add-patch: response to unknown command
add-patch: do not show UI messages on stderr
Command line completion script (in contrib/) learned to complete
"git symbolic-ref" a bit better (you need to enable plumbing
commands to be completed with GIT_COMPLETION_SHOW_ALL_COMMANDS).
* rh/complete-symbolic-ref:
completion: add docs on how to add subcommand completions
completion: improve docs for using __git_complete
completion: add 'symbolic-ref'
The singleton index_state instance "the_index" has been eliminated
by always instantiating "the_repository" and replacing references
to "the_index" with references to its .index member.
* ps/the-index-is-no-more:
repository: drop `initialize_the_repository()`
repository: drop `the_index` variable
builtin/clone: stop using `the_index`
repository: initialize index in `repo_init()`
builtin: stop using `the_index`
t/helper: stop using `the_index`
The credential helper protocol, together with the HTTP layer, have
been enhanced to support authentication schemes different from
username & password pair, like Bearer and NTLM.
* bc/credential-scheme-enhancement:
credential: add method for querying capabilities
credential-cache: implement authtype capability
t: add credential tests for authtype
credential: add support for multistage credential rounds
t5563: refactor for multi-stage authentication
docs: set a limit on credential line length
credential: enable state capability
credential: add an argument to keep state
http: add support for authtype and credential
docs: indicate new credential protocol fields
credential: add a field called "ephemeral"
credential: gate new fields on capability
credential: add a field for pre-encoded credentials
http: use new headers for each object request
remote-curl: reset headers on new request
credential: add an authtype field
Tests to ensure interoperability between reftable written by jgit
and our code have been added and enabled in CI.
* ps/ci-test-with-jgit:
t0612: add tests to exercise Git/JGit reftable compatibility
t0610: fix non-portable variable assignment
t06xx: always execute backend-specific tests
ci: install JGit dependency
ci: make Perforce binaries executable for all users
ci: merge scripts which install dependencies
ci: fix setup of custom path for GitLab CI
ci: merge custom PATH directories
ci: convert "install-dependencies.sh" to use "/bin/sh"
ci: drop duplicate package installation for "linux-gcc-default"
ci: skip sudo when we are already root
ci: expose distro name in dockerized GitHub jobs
ci: rename "runs_on_pool" to "distro"
Code to write out reftable has seen some optimization and
simplification.
* ps/reftable-write-optim:
reftable/block: reuse compressed array
reftable/block: reuse zstream when writing log blocks
reftable/writer: reset `last_key` instead of releasing it
reftable/writer: unify releasing memory
reftable/writer: refactorings for `writer_flush_nonempty_block()`
reftable/writer: refactorings for `writer_add_record()`
refs/reftable: don't recompute committer ident
reftable: remove name checks
refs/reftable: skip duplicate name checks
refs/reftable: perform explicit D/F check when writing symrefs
refs/reftable: fix D/F conflict error message on ref copy
Until now, `git config -h` would have printed help for the old-style
syntax. Now that all modes have proper subcommands though it is
preferable to instead display the subcommand help.
Drop the `NO_INTERNAL_HELP` flag to do so. While at it, drop the help
mismatch in t0450 and add the `--get-colorbool` option to the usage such
that git-config(1)'s synopsis and `git config -h` match.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "edit" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "remove-section" subcommand to git-config(1). Please
refer to preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "rename-section" subcommand to git-config(1). Please
refer to preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "unset" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "set" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "get" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While git-config(1) has several modes, those modes are not exposed with
subcommands but instead by specifying action flags like `--unset` or
`--list`. This user interface is not really in line with how our more
modern commands work, where it is a lot more customary to say e.g. `git
remote list`. Furthermore, to add to the confusion, git-config(1) also
allows the user to request modes implicitly by just specifying the
correct number of arguments. Thus, `git config foo.bar` will retrieve
the value of "foo.bar" while `git config foo.bar baz` will set it to
"baz".
Overall, this makes for a confusing interface that could really use a
makeover. It hurts discoverability of what you can do with git-config(1)
and is comparatively easy to get wrong. Converting the command to have
subcommands instead would go a long way to help address these issues.
One concern in this context is backwards compatibility. Luckily, we can
introduce subcommands without breaking backwards compatibility at all.
This is because all the implicit modes of git-config(1) require that the
first argument is a properly formatted config key. And as config keys
_must_ have a dot in their name, any value without a dot would have been
discarded by git-config(1) previous to this change. Thus, given that
none of the subcommands do have a dot, they are unambiguous.
Introduce the first such new subcommand, which is "git config list". To
retain backwards compatibility we only conditionally use subcommands and
will fall back to the old syntax in case no subcommand was detected.
This should help to transition to the new-style syntax until we
eventually deprecate and remove the old-style syntax.
Note that the way we handle this we're duplicating some functionality
across old and new syntax. While this isn't pretty, it helps us to
ensure that there really is no change in behaviour for the old syntax.
Amend tests such that we run them both with old and new style syntax.
As tests are now run twice, state from the first run may be still be
around in the second run and thus cause tests to fail. Add cleanup logic
as required to fix such tests.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pull out function to handle the `--null` option, which we are about to
reuse in subsequent commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's quite a bunch of options to git-config(1) that allow the user to
specify which config location to use when reading or writing config
options. The logic to handle this is thus by necessity also quite
involved.
Pull it out into a separate function so that we can reuse it in
subsequent commits which introduce proper subcommands.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-config(1) command has various different modes which are
accessible via e.g. `--get-urlmatch` or `--unset-all`. These modes are
declared with `OPT_BIT()`, which causes two minor issues:
- The respective modes also have a negated form `--no-get-urlmatch`,
which is unintended.
- We have to manually handle exclusiveness of the modes.
Switch these options to instead use `OPT_CMDMODE()`, which is made
exactly for this usecase. Remove the now-unneeded check that only a
single mode is given, which is now handled by the parse-options
interface.
While at it, format optional placeholders for arguments to conform to
our style guidelines by using `[<placeholder>]`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--fixed-value` option can be used to alter how the value-pattern
parameter is interpreted for the various actions of git-config(1). But
while it is an option, it is currently listed as part of the actions
group, which is wrong.
Move the option to the "Other" group, which hosts the various options
known to git-config(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move around the option array. This will help us with a follow-up commit
that introduces subcommands to git-config(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ownership of memory returned when preparing a comment string is
quite intricate: when the returned value is different than the passed
value, then the caller is responsible to free the memory. This is quite
subtle, and it's even easier to miss because the returned value is in
fact a `const char *`.
Adapt the function to always return either `NULL` or a newly allocated
string. The function is called at most once per git-config(1), so it's
not like this micro-optimization really matters. Thus, callers are now
always responsible for freeing the value.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
RGB color parsing currently supports 24-bit values in the form #RRGGBB.
As in Cascading Style Sheets (CSS [1]), also allow to specify an RGB color
using only three digits with #RGB.
In this shortened form, each of the digits is – again, as in CSS –
duplicated to convert the color to 24 bits, e.g. #f1b specifies the same
color as #ff11bb.
In color.h, remove the '0x' prefix in the example to match the actual
syntax.
[1] https://developer.mozilla.org/en-US/docs/Web/CSS/hex-color
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that the RGB color parser rejects invalid characters and
invalid lengths.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is most probably just an editing left-over from cb357221a4 (t4026:
test "normal" color, 2014-11-20) which added this test.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d44e5267ea (diff-lib: plug minor memory leaks in do_diff_cache(),
2020-11-14) added the call to diff_setup_done() to release the memory
of the parseopt member of struct diff_options that repo_init_revisions()
had allocated via repo_diff_setup() and prep_parse_options().
189e97bc4b (diff: remove parseopts member from struct diff_options,
2022-12-01) did away with that allocation; diff_setup_done() doesn't
release any memory anymore. So stop calling this function on the blank
diffopt member before it is overwritten, as this is no longer necessary.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Completing commands like "git rebase" in one repository will leak the
local __git_repo_path into the shell's environment so that completing
commands after changing to a different repository will give the old
repository's references (or none at all).
The bug report on the mailing list [1] suggests one simple way to observe
this yourself:
Enter the following commands from some directory:
mkdir a b b/c
for d (a b); git -C $d init && git -C $d commit --allow-empty -m init
cd a
git branch foo
pushd ../b/c
git branch bar
Now type these:
git rebase <TAB>… # completion for bar available; C-c to abort
declare -p __git_repo_path # outputs /path/to/b/.git
popd
git branch # outputs foo, main
git rebase <TAB>… # completion candidates are bar, main!
Ideally, the last typed <TAB> should be yielding foo, main.
Commit beb6ee7163 (completion: extract repository discovery from
__gitdir(), 2017-02-03) anticipated this problem by marking
__git_repo_path as local in __git_main and __gitk_main for Bash
completion but did not give the same mark to _git for Zsh completion.
Thus make __git_repo_path local for Zsh completion, too.
[1]: https://lore.kernel.org/git/CALnO6CBv3+e2WL6n6Mh7ZZHCX2Ni8GpvM4a-bQYxNqjmgZdwdg@mail.gmail.com/
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A scheduled "git maintenance" job is expected to work on all
repositories it knows about, but it stopped at the first one that
errored out. Now it keeps going.
* js/for-each-repo-keep-going:
maintenance: running maintenance should not stop on errors
for-each-repo: optionally keep going on an error
In addition to building the objects needed, try to link the objects
that are used in fuzzer tests, to make sure at least they build
without bitrot, in Linux CI runs.
* js/build-fuzz-more-often:
fuzz: link fuzz programs with `make all` on Linux
Advertise "git contacts", a tool for newcomers to find people to
ask review for their patches, a bit more in our developer
documentation.
* la/doc-use-of-contacts-when-contributing:
SubmittingPatches: demonstrate using git-contacts with git-send-email
SubmittingPatches: add heading for format-patch and send-email
SubmittingPatches: dedupe discussion of security patches
SubmittingPatches: discuss reviewers first
SubmittingPatches: quote commands
SubmittingPatches: mention GitGitGadget
SubmittingPatches: clarify 'git-contacts' location
MyFirstContribution: mention contrib/contacts/git-contacts
The "--rfc" option of "git format-patch" learned to take an
optional string value to be used in place of "RFC" to tweak the
"[PATCH]" on the subject header.
* jc/format-patch-rfc-more:
format-patch: "--rfc=-(WIP)" appends to produce [PATCH (WIP)]
format-patch: allow --rfc to optionally take a value, like --rfc=WIP
The "-k" and "--rfc" options of "format-patch" will now error out
when used together, as one tells us not to add anything to the
title of the commit, and the other one tells us to add "RFC" in
addition to "PATCH".
* ds/format-patch-rfc-and-k:
format-patch: ensure that --rfc and -k are mutually exclusive
The procedure to build multi-pack-index got confused by the
replace-refs mechanism, which has been corrected by disabling the
latter.
* xx/disable-replace-when-building-midx:
midx: disable replace objects
"git rebase --signoff" used to forget that it needs to add a
sign-off to the resulting commit when told to continue after a
conflict stops its operation.
* pw/rebase-m-signoff-fix:
rebase -m: fix --signoff with conflicts
sequencer: store commit message in private context
sequencer: move current fixups to private context
sequencer: start removing private fields from public API
sequencer: always free "struct replay_opts"
When the user gives an unknown command to the "add -p" prompt, the list
of accepted commands with their explanation is given. This is the same
output they get when they say '?'.
However, the unknown command may be due to a user input error rather
than the user not knowing the valid command.
To reduce the likelihood of user confusion and error repetition, instead
of displaying the list of accepted commands, display a short error
message with the unknown command received, as feedback to the user.
Include a reminder about the current command '?' in the new message, to
guide the user if they want help.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to show some UI messages on stderr, and yet doing so
may produce some undesirable results, such as messages appearing in an
unexpected order.
Let's use stdout for all UI messages, and adjusts the tests accordingly.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
