Get rid of extraneous whitespace, replace tab-after-fullstop with
space, etc.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --contents option can be used with git blame to blame the file as if
it had the contents from the specified file. This is akin to copying the
contents into the working tree and then running git blame. This option
has been supported since 1cfe77333f ("git-blame: no rev means start
from the working tree file.")
The --contents option always blames the file as if it was based on the
current HEAD commit. If you try to pass a revision while using
--contents, you get the following error:
fatal: cannot use --contents with final commit object name
This is because the blame process generates a fake working tree commit
which always uses the HEAD object as its sole parent.
Enhance fake_working_tree_commit to take the object ID to use for the
parent instead of always using the HEAD object. Then, always generate a
fake commit when we have contents provided, even if we have a final
object. Remove the check to disallow --contents and a final revision.
Note that the behavior of generating a fake working commit is still
skipped when a revision is provided but --contents is not provided.
Generating such a commit in that case would combine the currently
checked out file contents with the provided revision, which breaks
normal blame behavior and produces unexpected results.
This enables use of --contents with an arbitrary revision, rather than
forcing the use of the local HEAD commit. This makes the --contents
option significantly more flexible, as it is no longer required to check
out the working tree to the desired commit before using --contents.
Reword the documentation so that its clear that --contents can be used
with <rev>.
Add tests for the --contents option to the annotate-tests.sh test
script.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a CONFIGURATION section to the documentation of various built-ins,
for those cases where the relevant config/NAME.txt doesn't map only to
one git-NAME.txt. In particular:
* config/blame.txt: used by git-{blame,annotate}.txt. Since the
git-annotate(1) documentation refers to git-blame(1) don't add a
"CONFIGURATION" section to git-annotate(1), only to git-blame(1).
* config/checkout.txt: maps to both git-checkout.txt and
git-switch.txt (but nothing else).
* config/init.txt: should be included in git-init(1) and
git-clone(1).
* config/column.txt: We should ideally mention the relevant subset of
this in git-{branch,clean,status,tag}.txt, but let's punt on it for
now. We will when we eventually split these sort of files into
e.g. config/column.txt and
config/column/{branch,clean,status,tag}.txt, with the former
including the latter set.
Things that are being left out, and why:
* config/{remote,remotes,credential}.txt: Configuration that affects
how we talk to remote repositories is harder to untangle. We'll need
to include some of this in git-{fetch,remote,push,ls-remote}.txt
etc., but some of those only use a small subset of these
options. Let's leave this for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--color-lines" and "--color-by-age" options of "git blame"
have been missing, which are now documented.
* bs/doc-blame-color-lines:
blame: document --color-* options
blame: describe default output format
Commit cdc2d5f11f (builtin/blame: dim uninteresting metadata lines,
2018-04-23) and 25d5f52901 (builtin/blame: highlight recently changed
lines, 2018-04-23) introduce --color-lines and --color-by-age options to
git blame, respectively. While both options are mentioned in usage help,
they aren't documented in git-blame(1). Document them.
Co-authored-by: Dr. Matthias St. Pierre <m.st.pierre@ncp-e.com>
Signed-off-by: Dr. Matthias St. Pierre <m.st.pierre@ncp-e.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While there is descriptions for porcelain and incremental output
formats, the default format isn't described. Describe that format for
the sake of completeness.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a gitmailmap(5) page similar to how .gitmodules and .gitignore
have their own pages at gitmodules(5) and gitignore(5). Now instead of
"check-mailmap", "blame" and "shortlog" documentation including the
description of the format we link to one canonical place.
This makes things easier for readers, since in our manpage or
web-based[1] output it's not clear that the "MAPPING AUTHORS" sections
aren't subtly different, as opposed to just included.
1. https://git-scm.com/docs/git-check-mailmap
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Early text written in 2006 explains the "--abbrev=<n>" option to
"show only a partial prefix", without saying that the length of the
partial prefix is not necessarily the number given to the option to
ensure that the output names the object uniquely.
Update documentation for the diff family of commands, "blame",
"branch --verbose", "ls-files" and "ls-tree" to stress that the
short prefix must uniquely refer to an object, and <n> is merely
the mininum number of hexdigits used in the prefix.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits that make formatting changes or function renames are often not
interesting when blaming a file. A user may deem such a commit as 'not
interesting' and want to ignore and its changes it when assigning blame.
For example, say a file has the following git history / rev-list:
---O---A---X---B---C---D---Y---E---F
Commits X and Y both touch a particular line, and the other commits do
not:
X: "Take a third parameter"
-MyFunc(1, 2);
+MyFunc(1, 2, 3);
Y: "Remove camelcase"
-MyFunc(1, 2, 3);
+my_func(1, 2, 3);
git-blame will blame Y for the change. I'd like to be able to ignore Y:
both the existence of the commit as well as any changes it made. This
differs from -S rev-list, which specifies the list of commits to
process for the blame. We would still process Y, but just don't let the
blame 'stick.'
This patch adds the ability for users to ignore a revision with
--ignore-rev=rev, which may be repeated. They can specify a set of
files of full object names of revs, e.g. SHA-1 hashes, one per line. A
single file may be specified with the blame.ignoreRevFile config option
or with --ignore-rev-file=file. Both the config option and the command
line option may be repeated multiple times. An empty file name "" will
clear the list of revs from previously processed files. Config options
are processed before command line options.
For a typical use case, projects will maintain the file containing
revisions for commits that perform mass reformatting, and their users
have the option to ignore all of the commits in that file.
Additionally, a user can use the --ignore-rev option for one-off
investigation. To go back to the example above, X was a substantive
change to the function, but not the change the user is interested in.
The user inspected X, but wanted to find the previous change to that
line - perhaps a commit that introduced that function call.
To make this work, we can't simply remove all ignored commits from the
rev-list. We need to diff the changes introduced by Y so that we can
ignore them. We let the blames get passed to Y, just like when
processing normally. When Y is the target, we make sure that Y does not
*keep* any blames. Any changes that Y is responsible for get passed to
its parent. Note we make one pass through all of the scapegoats
(parents) to attempt to pass blame normally; we don't know if we *need*
to ignore the commit until we've checked all of the parents.
The blame_entry will get passed up the tree until we find a commit that
has a diff chunk that affects those lines.
One issue is that the ignored commit *did* make some change, and there is
no general solution to finding the line in the parent commit that
corresponds to a given line in the ignored commit. That makes it hard
to attribute a particular line within an ignored commit's diff
correctly.
For example, the parent of an ignored commit has this, say at line 11:
commit-a 11) #include "a.h"
commit-b 12) #include "b.h"
Commit X, which we will ignore, swaps these lines:
commit-X 11) #include "b.h"
commit-X 12) #include "a.h"
We can pass that blame entry to the parent, but line 11 will be
attributed to commit A, even though "include b.h" came from commit B.
The blame mechanism will be looking at the parent's view of the file at
line number 11.
ignore_blame_entry() is set up to allow alternative algorithms for
guessing per-line blames. Any line that is not attributed to the parent
will continue to be blamed on the ignored commit as if that commit was
not ignored. Upcoming patches have the ability to detect these lines
and mark them in the blame output.
The existing algorithm is simple: blame each line on the corresponding
line in the parent's diff chunk. Any lines beyond that stay with the
target.
For example, the parent of an ignored commit has this, say at line 11:
commit-a 11) void new_func_1(void *x, void *y);
commit-b 12) void new_func_2(void *x, void *y);
commit-c 13) some_line_c
commit-d 14) some_line_d
After a commit 'X', we have:
commit-X 11) void new_func_1(void *x,
commit-X 12) void *y);
commit-X 13) void new_func_2(void *x,
commit-X 14) void *y);
commit-c 15) some_line_c
commit-d 16) some_line_d
Commit X nets two additionally lines: 13 and 14. The current
guess_line_blames() algorithm will not attribute these to the parent,
whose diff chunk is only two lines - not four.
When we ignore with the current algorithm, we get:
commit-a 11) void new_func_1(void *x,
commit-b 12) void *y);
commit-X 13) void new_func_2(void *x,
commit-X 14) void *y);
commit-c 15) some_line_c
commit-d 16) some_line_d
Note that line 12 was blamed on B, though B was the commit for
new_func_2(), not new_func_1(). Even when guess_line_blames() finds a
line in the parent, it may still be incorrect.
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This heuristic has been the default since 2.14 so we should not confuse our
users by saying that it's experimental and off by default.
Signed-off-by: Carlos Martín Nieto <cmn@dwim.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a common mistake to say "git blame --reverse OLD path",
expecting that the command line is dwimmed as if asking how lines
in path in an old revision OLD have survived up to the current
commit.
* jc/blame-reverse:
blame: dwim "blame --reverse OLD" as "blame --reverse OLD.."
blame: improve diagnosis for "--reverse NEW"
Teach "git blame" and "git annotate" the --compaction-heuristic and
--indent-heuristic options that are now supported by "git diff".
Also teach them to honor the `diff.compactionHeuristic` and
`diff.indentHeuristic` configuration options.
It would be conceivable to introduce separate configuration options for
"blame" and "annotate"; for example `blame.compactionHeuristic` and
`blame.indentHeuristic`. But it would be confusing to users if blame
output is inconsistent with diff output, so it makes more sense for them
to respect the same configuration.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame --reverse OLD..NEW -- PATH" tells us to start from the
contents in PATH at OLD and observe how each line is changed while
the history develops up to NEW, and report for each line the latest
commit up to which the line survives in the original form.
If you say "git blame --reverse NEW -- PATH" by mistake, we complain
about the missing OLD, but we phrased it as "No commit to dig down
to?" In this case, however, we are digging up from OLD, so say so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the command to show progress output when it takes long time to
produce the first line of output; this option cannot be used with
"--incremental" or "--porcelain" options.
git-annotate inherits the option as well.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Edmundo Carmona Antoranz <eantoranz@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complement existing --show-email option with fallback
configuration variable, with tests.
Signed-off-by: Quentin Neill <quentin.neill@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We state that the following paragraph mentions the pickaxe
interface, but the term pickaxe is not then used. This
change clarifies that the example command uses the pickaxe
interface and what it is searching for.
Signed-off-by: Albert L. Lash, IV <alash3@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"timezone" is two words, not one (i.e. "time zone" is correct).
Correct this in these files:
-- date-formats.txt
-- git-blame.txt
-- git-cvsimport.txt
-- git-fast-import.txt
-- git-svn.txt
-- gitweb.conf.txt
-- rev-list-options.txt
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new syntax finds a funcname matching /pattern/, and then takes from there
up to (but not including) the next funcname. So you can say
git log -L:main:main.c
and it will dig up the main() function and show its line-log, provided
there are no other funcnames matching 'main'.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear to people who (rightly or wrongly) think that the
"--follow" option should follow origin across while-file renames
that we already do so. That would explain the output that they see
when they do give the "--follow" option to the command.
We may or may not want to do a "--no-follow" patch as a follow-up,
but that is a separate topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just like --porcelain, except that we always output
the commit information for each line, not just the first
time it is referenced. This can make quick and dirty scripts
much easier to write; see the example added to the blame
documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If user sets config.abbrev option, use it as if --abbrev was given. This
is the default value and user can override different abbrev length by
specifying the --abbrev=N command line option.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
Add a new option -e (or --show-email) to git-blame that will display
the author's email instead of name on each line. This option works
for both git-blame and git-annotate.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* remotes/trast-doc/for-next:
Documentation: spell 'git cmd' without dash throughout
Documentation: format full commands in typewriter font
Documentation: warn prominently against merging with dirty trees
Documentation/git-merge: reword references to "remote" and "pull"
Conflicts:
Documentation/config.txt
Documentation/git-config.txt
Documentation/git-merge.txt
Lift the explanation of -CCC option in the source to the documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
This was introduced in 85af7929ee but
not documented outside the commit message.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include it directly from git-shortlog.txt, and refer
to it from pretty-format.txt.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When refactoring code to split one iteration of a too deeply
nested loop into a separate function, it inevitably makes the
indentation levels shallower (that's the sole point of such a
refactoring). With "git blame -w", you can ignore such
re-indentation and pass blame for such moved lines to the
parent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this "git blame -b -s HEAD~n..HEAD" becomes a nicer way to
review the result of recent changes in context.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Moved options that pertained to both git-blame and git-annotate to a
common file blame-options.txt.
builtin-blame.c: Removed --compatibility, --long, --time from the
short usage as they are not handled in the code.
Documentation/git-blame.txt: Removed common options to git-annotate.
Added documentation for --score-debug. Removed --compatibility.
Adjusted usage at top to not wrap on 80 columns.
Documentation/git-annotate.txt: Using common options blame-options.txt.
Documentation/blame-options.txt: Added -b note about associated config
option, added --root note about associated config option, added
documentation for --show-stats. Removed --long, --time, --rev-file as
those options do not really exist. Added documentation for -M/-C taking
an optional score argument for detection of moved lines.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the example to specify a line range with regexps to
a later part of the manual page that has similar examples.
Signed-off-by: Junio C Hamano <junkio@cox.net>