Change a fragile pattern introduced in 696acf45f9 (checkout:
implement "-" abbreviation, add docs and tests, 2009-01-17) to check
the exit code of both "git symbolic-ref" and "git rev-parse".
Without this change this test will become flaky e.g. under
SANITIZE=leak if some (but not all) memory leaks revealed by these
commands are fixed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix code added in 969c877506 (git apply --directory broken for new
files, 2008-10-12) so that it doesn't invoke "git ls-files" on the
left-hand-side of a pipe, instead let's use an intermediate file.
Since we're doing that we can also drop the sub-shell that was here to
group the two.
There are a lot of these sorts of patterns in the test suite, and
there's no particular reason to fix this one other than in a preceding
commit all similar patterns except this one were fixed in
"t/t4128-apply-root.sh", so let's fix this one straggler as well.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend a prerequisite check added in 5c1ebcca4d (grep/icase: avoid
kwsset on literal non-ascii strings, 2016-06-25) to do invoke
'test-tool regex' in such a way that we'll notice if it dies under
SANITIZE=leak due to having a memory leak, as opposed to us not having
the "ICASE" support we're checking for.
Because we weren't making a distinction between the two I'd marked
these tests as passing under SANITIZE=leak in 03d85e21951 (leak tests:
mark remaining leak-free tests as such, 2021-12-17).
Doing this is tricky. Ideally "test_lazy_prereq" would materialize as
a "real" test that we could check the exit code of with the same
signal matching that "test_must_fail" does.
However lazy prerequisites aren't real tests, and are instead lazily
materialized in the guts of "test_have_prereq" when we've already
started another test.
We could detect the abort() (or similar) there and pass that exit code
down, and fail the test that caused the prerequisites to be
materialized.
But that would require extensive changes to test-lib.sh and
test-lib-functions.sh. Let's instead simply check if the exit code of
"test-tool regex" is zero, and if so set the prerequisites. If it's
non-zero let's run it again with "test_must_fail". We'll thus make a
distinction between "bad" non-zero (segv etc) and "good" (exit 1 etc.).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a couple of uses of "test_expect_failure" to use a
"test_expect_success" to positively assert the current behavior, and
replace the intent of "test_expect_failure" with a "TODO" comment int
the description.
As noted in [1] the "test_expect_failure" feature is overly eager to
accept any failure as OK, and thus by design hides segfaults, abort()
etc. Because of that I didn't notice in dd9cede913 (leak tests: mark
some rev-list tests as passing with SANITIZE=leak, 2021-10-31) that
this test leaks memory under SANITIZE=leak.
I have some larger local changes to add a better
"test_expect_failure", which would work just like
"test_expect_success", but would allow us say "test_todo" here (and
"success" would emit a "not ok [...] # TODO", not "ok [...]".
So even though using "test_expect_success" here comes with its own
problems[2], let's use it as a narrow change to fix the problem at
hand here and stop conflating the current "success" with actual
SANITIZE=leak failures.
1. https://lore.kernel.org/git/87tuhmk19c.fsf@evledraar.gmail.com/
2. https://lore.kernel.org/git/xmqq4k9kj15p.fsf@gitster.g/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a fragile pattern introduced in 2b459b483c (diff: make sure
work tree side is shown as 0{40} when different, 2008-03-02) to check
the exit code of "git rev-list", while we're at it let's get rid of
the needless sub-shell for invoking it in favor of the "-C" option.
Because of this I'd marked these tests as passing under SANITIZE=leak
in 16d4bd4f14 (leak tests: mark some diff tests as passing with
SANITIZE=leak, 2021-10-31), let's remove the
"TEST_PASSES_SANITIZE_LEAK=true" annotation as they no longer do.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a fragile test pattern that's been with us ever since these
tests were introduced in [1], [2] and [3] to properly return the exit
code of the failing command on failure.
Because of this I'd marked this test as passing under SANITIZE=leak in
[4] and [5]. We need to remove those annotations as these tests will
no longer pass.
1. 9081a421a6 (checkout: fix "branch info" memory leaks, 2021-11-16)
2. 0057c0917d (Add selftests verifying that we can parse notes trees
with various fanouts, 2009-10-09)
3. 048cdd4665 (t3305: Verify that adding many notes with git-notes
triggers increased fanout, 2010-02-13)
4. ca08972495 (leak tests: mark some notes tests as passing with
SANITIZE=leak, 2021-10-31)
5. 9081a421a6 (checkout: fix "branch info" memory leaks, 2021-11-16)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend a test added in 9c46c054ae (rev-parse: tests git rev-parse
--verify master@{n}, for various n, 2010-08-24) so that we'll stop
ignoring the exit code of "git reflog" by having it on the
left-hand-side of a pipe.
Because of this I'd marked this test as passing under SANITIZE=leak in
f442c94638 (leak tests: mark some rev-parse tests as passing with
SANITIZE=leak, 2021-10-31). As all of it except this specific test
will now pass, let's skip it under the !SANITIZE_LEAK prerequisite.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As in the preceding commit change a similar fragile test pattern
introduced in b798671fa9 (merge-recursive: do not rudely die on
binary merge, 2007-08-14) to use a "test_must_fail" instead.
Before this we wouldn't distinguish normal "git merge" failures from
segfaults or abort(). Unlike the preceding commit we didn't end up
hiding any SANITIZE=leak failures in this case, but let's
correspondingly change these anyway.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a fragile test pattern introduced in 6b763c424e (git-apply: do
not read past the end of buffer, 2007-09-05). Before this we wouldn't
distinguish normal "git apply" failures from segfaults or abort().
I'd previously marked this test as passing under SANITIZE=leak in
f54f48fc07 (leak tests: mark some apply tests as passing with
SANITIZE=leak, 2021-10-31). Let's remove that annotation as this test
will no longer pass.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a test pattern that originated in f1af60bdba (Support 'diff=pgm'
attribute, 2007-04-22) so that we'll stop using "git diff" on the
left-hand-side of a pipe, and thus ignoring its exit code.
Rather than use intermediate files let's rewrite these tests to a much
simpler but more exhaustive "test_tmp" where we'll ignore certain
fields in the output.
Note that this is not a faithful conversion of the previous
"read/test" in some cases, as we were ignoring more fields there than
we strictly needed to. Now we'll "test_cmp" everything we can, and
only ignore the likes of paths to $TEMPDIR etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a test pattern that originated in f1af60bdba (Support 'diff=pgm'
attribute, 2007-04-22) so that we'll stop using "git diff" on the
left-hand-side of a pipe, and thus ignoring its exit code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an issue with the exit code of "diff-files" being ignored, which
has been ignored ever since these tests were originally added in
c859600954 ([PATCH] read-tree: save more user hassles during
fast-forward., 2005-06-07).
Since the exit code was ignored we'd hide errors here under
SANITIZE=leak, which resulted in me mistakenly marking these tests as
passing under SANITIZE=leak in e5a917fcf4 (unpack-trees: don't leak
memory in verify_clean_subdirectory(), 2021-10-07) and
4ea08416b8 (leak tests: mark a read-tree test as passing
SANITIZE=leak, 2021-10-31).
As it would be non-trivial to fix these tests (the leak is in
revision.c) let's un-mark them as passing under SANITIZE=leak in
addition to fixing the issue of ignoring the exit code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the test_stdout_line_count helper added in
cdff1bb5a3 (test-lib-functions: introduce test_stdout_line_count,
2021-07-04) so that we'll spot if git itself dies, segfaults etc in
these expressions.
Because we didn't distinguish these failure conditions before I'd
mistakenly marked these tests as passing under SANITIZE=leak in
dd9cede913 (leak tests: mark some rev-list tests as passing with
SANITIZE=leak, 2021-10-31).
While we're at it let's re-indent these lines to match our usual
style, as we're having to change all of them anyway.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change some of the patterns in the test suite where we were hiding the
exit code from "git" by invoking it in a sub-shell within a "test"
expression to use temporary files and test_cmp instead.
These are not all the occurrences of this anti-pattern, but these in
particular hid issues where LSAN was dying, and I'd thus marked these
tests as passing under the linux-leaks CI job in past commits with
"TEST_PASSES_SANITIZE_LEAK=true". Let's deal with that by either
removing that marking, or skipping specific tests under
!SANITIZE_LEAK.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Messages "ort" merge backend prepares while dealing with conflicted
paths were unnecessarily confusing since it did not differentiate
inner merges and outer merges.
* en/ort-inner-merge-conflict-report:
merge-ort: make informational messages from recursive merges clearer
Workaround we have for versions of PCRE2 before their version 10.36
were in effect only for their versions newer than 10.36 by mistake,
which has been corrected.
* rs/pcre-invalid-utf8-fix-fix:
grep: fix triggering PCRE2_NO_START_OPTIMIZE workaround
Setting core.untrackedCache to true failed to add the untracked
cache extension to the index.
* ds/core-untracked-cache-config:
dir: force untracked cache with core.untrackedCache
Plug (some) memory leaks around parse_date_format().
* ab/date-mode-release:
date API: add and use a date_mode_release()
date API: add basic API docs
date API: provide and use a DATE_MODE_INIT
date API: create a date.h, split from cache.h
cache.h: remove always unused show_date_human() declaration
Some code clean-up in the "git grep" machinery.
* ab/grep-patterntype:
grep: simplify config parsing and option parsing
grep.c: do "if (bool && memchr())" not "if (memchr() && bool)"
grep.h: make "grep_opt.pattern_type_option" use its enum
grep API: call grep_config() after grep_init()
grep.c: don't pass along NULL callback value
built-ins: trust the "prefix" from run_builtin()
grep tests: add missing "grep.patternType" config tests
grep tests: create a helper function for "BRE" or "ERE"
log tests: check if grep_config() is called by "log"-like cmds
grep.h: remove unused "regex_t regexp" from grep_opt
"git clone --filter=... --recurse-submodules" only makes the
top-level a partial clone, while submodules are fully cloned. This
behaviour is changed to pass the same filter down to the submodules.
* js/apply-partial-clone-filters-recursively:
clone, submodule: pass partial clone filters to submodules
Unify more messages to help l10n.
* ja/i18n-common-messages:
i18n: fix some misformated placeholders in command synopsis
i18n: remove from i18n strings that do not hold translatable parts
i18n: factorize "invalid value" messages
i18n: factorize more 'incompatible options' messages
Further tweaks on progress API.
* ab/only-single-progress-at-once:
pack-bitmap-write.c: don't return without stop_progress()
progress API: unify stop_progress{,_msg}(), fix trace2 bug
progress.c: refactor stop_progress{,_msg}() to use helpers
progress.c: use dereferenced "progress" variable, not "(*p_progress)"
progress.h: format and be consistent with progress.c naming
progress.c tests: test some invalid usage
progress.c tests: make start/stop commands on stdin
progress.c test helper: add missing braces
leak tests: fix a memory leak in "test-progress" helper
"git sparse-checkout" wants to work with per-worktree configuration,
but did not work well in a worktree attached to a bare repository.
* ds/sparse-checkout-requires-per-worktree-config:
config: make git_configset_get_string_tmp() private
worktree: copy sparse-checkout patterns and config on add
sparse-checkout: set worktree-config correctly
config: add repo_config_set_worktree_gently()
worktree: create init_worktree_config()
Documentation: add extensions.worktreeConfig details
Error output given in response to an ambiguous object name has been
improved.
* ab/ambiguous-object-name:
object-name: re-use "struct strbuf" in show_ambiguous_object()
object-name: iterate ambiguous objects before showing header
object-name: show date for ambiguous tag objects
object-name: make ambiguous object output translatable
object-name: explicitly handle bad tags in show_ambiguous_object()
object-name: explicitly handle OBJ_BAD in show_ambiguous_object()
object-name tests: add tests for ambiguous object blind spots
"git log --graph --graph" used to leak a graph structure, and there
was no way to countermand "--graph" that appear earlier on the
command line. A "--no-graph" option has been added and resource
leakage has been plugged.
* ah/log-no-graph:
log: add a --no-graph option
log: fix memory leak if --graph is passed multiple times
Fix tests that are unnecessarily specific to ref-files backend.
* hw/t1410-adjust-test-for-reftable:
t1410: mark bufsize boundary test as REFFILES
t1410: use test-tool ref-store to inspect reflogs
A couple of optimization to "git fetch".
* ps/fetch-optim-with-commit-graph:
fetch: skip computing output width when not printing anything
fetch-pack: use commit-graph when computing cutoff
"working tree" and "per-worktree ref" were in glossary, but
"worktree" itself wasn't, which has been corrected.
* jc/glossary-worktree:
glossary: describe "worktree"
"git cmd -h" outside a repository should error out cleanly for many
commands, but instead it hit a BUG(), which has been corrected.
* js/short-help-outside-repo-fix:
t0012: verify that built-ins handle `-h` even without gitdir
checkout/fetch/pull/pack-objects: allow `-h` outside a repository
When there is no object to write .bitmap file for, "git
multi-pack-index" triggered an error, instead of just skipping,
which has been corrected.
* tb/midx-no-bitmap-for-no-objects:
midx: prevent writing a .bitmap without any objects
"git branch" learned the "--recurse-submodules" option.
* gc/branch-recurse-submodules:
branch.c: use 'goto cleanup' in setup_tracking() to fix memory leaks
branch: add --recurse-submodules option for branch creation
builtin/branch: consolidate action-picking logic in cmd_branch()
branch: add a dry_run parameter to create_branch()
branch: make create_branch() always create a branch
branch: move --set-upstream-to behavior to dwim_and_setup_tracking()
Because a deletion of ref would need to remove it from both the
loose ref store and the packed ref store, a delete-ref operation
that logically removes one ref may end up invoking ref-transaction
hook twice, which has been corrected.
* ps/avoid-unnecessary-hook-invocation-with-packed-refs:
refs: skip hooks when deleting uncovered packed refs
refs: do not execute reference-transaction hook on packing refs
refs: demonstrate excessive execution of the reference-transaction hook
refs: allow skipping the reference-transaction hook
refs: allow passing flags when beginning transactions
refs: extract packed_refs_delete_refs() to allow control of transaction
Use an internal call to reset_head() helper function instead of
spawning "git checkout" in "rebase", and update code paths that are
involved in the change.
* pw/use-in-process-checkout-in-rebase:
rebase -m: don't fork git checkout
rebase --apply: set ORIG_HEAD correctly
rebase --apply: fix reflog
reset_head(): take struct rebase_head_opts
rebase: cleanup reset_head() calls
create_autostash(): remove unneeded parameter
reset_head(): make default_reflog_action optional
reset_head(): factor out ref updates
reset_head(): remove action parameter
rebase --apply: don't run post-checkout hook if there is an error
rebase: do not remove untracked files on checkout
rebase: pass correct arguments to post-checkout hook
t5403: refactor rebase post-checkout hook tests
rebase: factor out checkout for up to date branch
"receive-pack" checks if it will do any ref updates (various
conditions could reject a push) before received objects are taken
out of the temporary directory used for quarantine purposes, so
that a push that is known-to-fail will not leave crufts that a
future "gc" needs to clean up.
* cb/clear-quarantine-early-on-all-ref-update-errors:
receive-pack: purge temporary data if no command is ready to run
As part of our code of conduct, we maintain a list of active members on
the Project Leadership Committee, which serves a couple of purposes. The
details are in 3f9ef874a7 (CODE_OF_CONDUCT: mention individual
project-leader emails, 2019-09-26), but the gist is as follows:
- It makes it clear that people with a CoC complaint may contact
members individually as opposed to the general PLC list (in case the
subject of their complaint has to do with one of the committee
members).
- It also serves as the de-facto list of people on the PLC, which
isn't committed anywhere else in the tree.
As of [1], Peff is no longer a member of Git's Project Leadership
Committee. Let's update the list of active members accordingly [2].
This also gives us a convenient opportunity to thank Peff for his many
years of service on the PLC, during which he helped the Git community in
more ways than we can easily list here.
[1]: https://lore.kernel.org/git/YboaAe4LWySOoAe7@coredump.intra.peff.net/
[2]: https://lore.kernel.org/git/CAP8UFD2XxP9r3PJ4GQjxUbV=E1ASDq1NDgB-h+S=v-bZQ7DYwQ@mail.gmail.com/
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
