Do not suggest that --exclude-promisor-objects is supported by git-log,
since it currently BUG-crashes and it's not necessary to support it.
Options that control behavior for promisor objects should be limited to
a small number of commands.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be necessary to disable SMTP authentication by a mechanism other
than sendemail.smtpuser being undefined. For example, if the user has
sendemail.smtpuser set globally but wants to disable authentication
locally in one repository.
--smtp-auth and sendemail.smtpauth now understand the value 'none' which
means to disable authentication completely, even if an authentication
user is specified.
The value 'none' is lower case to avoid conflicts with any RFC 4422
authentication mechanisms.
The user may also specify the command line argument --no-smtp-auth as a
shorthand for --smtp-auth=none
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git stash apply <argument>` sees an argument that consists only of
digits, it tries to be smart and interpret it as `stash@{<number>}`.
Unfortunately, an all-digit hash (which is unlikely but still possible)
is therefore misinterpreted as `stash@{<n>}` reflog.
To prevent that from happening, let's append `^0` after the stash hash,
to make sure that it is interpreted as an OID rather than as a number.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was reported by Gábor Szeder and analyzed by Alban Gruin that the
built-in rebase stores only abbreviated stash hashes in the `autostash`
file.
This is problematic e.g. in t5520-pull.sh, where the abbreviated hash is
so short that it sometimes consists only of digits, which are
subsequently mistaken ("DWIMmed") for numbers by `git stash apply`.
Let's align the behavior of the built-in rebase with the scripted rebase
and store the full stash hash instead. That makes it a lot less likely
that it consists only of digits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already called that function at this point, and stored the result in
the `path` variable. We might just as well use it ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the parapgraph numbers from lines explaining the reflog format
and typeset these lines in monospace.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'gitweb.conf.txt' uses inconsistent indentation in listing blocks and a mix
of listing blocks and literal paragraphs. Both didn't look pretty in the
rendered HTML page.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--format=<format>' is now listed in the 'OPTIONS' section, not only
the '<format>' string itself. The description moved up a few paragraphs
because '<format>' is not a standalone paramater but a parameter for the
option '--format'.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Followup to 5dd05ebf ("doc: fix merge-base ASCII art tab spacing", 2016-10-21)
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Defined delimiters for 'git worktree list --porcelain' make the format
easier to parse in scripts. For example
sed -n '/^worktree ID$/,/^$/p'
extracts only the information for the worktree 'ID'.
The format did not changed since [1], only the guaranty is added.
[1] bb9c03b82a (worktree: add 'list' command, 2015-10-08)
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Obtain the primary key fingerprint off VALIDSIG status message,
and expose it via %GP format.
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support processing VALIDSIG status that provides additional information
for valid signatures. Use this information to propagate signing key
fingerprint and expose it via %GF pretty format. This format can be
used to build safer key verification systems that verify the key via
complete fingerprint rather than short/long identifier provided by %GK.
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the logic used to determine whether key and signer information
is present to use explicit flags in sigcheck_gpg_status[] array. This
is more future-proof, since it makes it possible to add additional
statuses without having to explicitly update the conditions.
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The elements of the array to be sorted are commit pointers, so the
comparison function gets handed references to these pointers, not
pointers to commit objects. Cast to the right type and dereference
once to correctly get the commit reference.
Found using Clang's ASan and t5500.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__gitcomp_builtin() has the main completion list provided by
git xxx --git-completion-helper
but the caller can also add extra options that is not provided by
--git-completion-helper. The only call site that does this is "git
difftool" completion.
This support is broken by b221b5ab9b (completion: collapse extra
--no-.. options - 2018-06-06), which adds a special value "--" to mark
that the rest of the options can be hidden by default. The commit
forgets the fact that extra options are appended after
"$(git xxx --git-completion-helper)", i.e. after this "--", and will
be incorrectly hidden as well.
Prepend the extra options before "$(git xxx --git-completion-helper)"
to avoid this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GnuPG supports creating signatures consisting of multiple signature
packets. If such a signature is verified, it outputs all the status
messages for each signature separately. However, git currently does not
account for such scenario and gets terribly confused over getting
multiple *SIG statuses.
For example, if a malicious party alters a signed commit and appends
a new untrusted signature, git is going to ignore the original bad
signature and report untrusted commit instead. However, %GK and %GS
format strings may still expand to the data corresponding
to the original signature, potentially tricking the scripts into
trusting the malicious commit.
Given that the use of multiple signatures is quite rare, git does not
support creating them without jumping through a few hoops, and finally
supporting them properly would require extensive API improvement, it
seems reasonable to just reject them at the moment.
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
introduced with c46c406ae1 (trace.h: support nested performance tracing)
on Aug 18, 2018 but not affecting maint
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 174d131fc9 (submodule.c: remove implicit dependency on
the_index - 2018-09-21) makes collect_changed_submodules() take a
"struct index_state *" as argument even if it's not really used. My
bad.
Instead of deleting this argument and fixing up all call sites. Let's
take this opportunity to remove some the_repository instead because
there's one or two in this function (and two more in its callback).
The callers can also get rid of some the_repository.
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git diff can be invoked with absolute paths. Typically, this triggers
the --no-index case. Then the absolute paths remain in the file names
that are printed in the output.
There is one peculiarity, though: When the command is invoked from a
a sub-directory in a repository, then it is attempted to strip the
sub-directory from the beginning of relative paths. Yet, to detect a
relative path the code just checks for an initial forward slash.
This mistakes a Windows style path like "D:/base" as a relative path
and the output looks like this, for example:
D:\dir\test\one>git -P diff --numstat D:\dir\base D:\dir\diff
1 1 ir/{base => diff}/1.txt
where the correct output should be
D:\dir\test\one>git -P diff --numstat D:\dir\base D:\dir\diff
1 1 D:/dir/{base => diff}/1.txt
If the sub-directory where 'git diff' is invoked is sufficiently deep
that the prefix becomes longer than the path to be printed, then the
subsequent code accesses the path out of bounds.
Use is_absolute_path() to detect Windows style absolute paths.
One might wonder whether the check for a directory separator that
is visible in the patch context should be changed from == '/' to
is_dir_sep() or not. It turns out not to be necessary. That code
only ever investigates paths that have undergone pathspec
normalization, after which there are only forward slashes even on
Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handling of receive.denyCurrentBranch=updateInstead was added to
a switch statement that handles other values of the variable, but
all the other case arms only checked a condition to reject the
attempted push, or let later logic in the same function to still
intervene, so that a push that does not fast-forward (which is
checked after the switch statement in question) is still rejected.
But the handling of updateInstead incorrectly took immediate effect,
without giving other checks a chance to intervene.
Instead of calling update_worktree() that causes the side effect
immediately, just note the fact that we will need to call the
function later, and first give other checks a chance to reject the
request. After the update-hook gets a chance to reject the push
(which happens as the last step in a series of checks), call
update_worktree() when we earlier detected the need to.
Reported-by: Rajesh Madamanchi
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 9ac3f0e5b3 (pack-objects: fix performance issues on packing large
deltas, 2018-07-22), a mutex was introduced that is used to guard the
call to set the delta size. This commit even added code to initialize
it, but at an incorrect spot: in `init_threaded_search()`, while the
call to `oe_set_delta_size()` (and hence to `packing_data_lock()`) can
happen in the call chain `check_object()` <- `get_object_details()` <-
`prepare_pack()` <- `cmd_pack_objects()`, which is long before the
`prepare_pack()` function calls `ll_find_deltas()` (which initializes
the threaded search).
Another tell-tale that the mutex was initialized in an incorrect spot is
that the function to initialize it lives in builtin/, while the code
that uses the mutex is defined in a libgit.a header file.
Let's use a more appropriate function: `prepare_packing_data()`, which
not only lives in libgit.a, but *has* to be called before the
`packing_data` struct is used that contains that mutex.
This fixes https://github.com/git-for-windows/git/issues/1839.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a problem in the way 9ac3f0e5b3 (pack-objects: fix
performance issues on packing large deltas, 2018-07-22) initializes that
mutex in the `packing_data` struct. The problem manifests in a
segmentation fault on Windows, when a mutex (AKA critical section) is
accessed without being initialized. (With pthreads, you apparently do
not really have to initialize them?)
This was reported in https://github.com/git-for-windows/git/issues/1839.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a partial clone that will lazily be hydrated from the
originating repository, we generally want to avoid "does this
object exist (locally)?" on objects that we deliberately omitted
when we created the clone. The cache-tree codepath (which is used
to write a tree object out of the index) however insisted that the
object exists, even for paths that are outside of the partial
checkout area. The code has been updated to avoid such a check.
* jt/cache-tree-allow-missing-object-in-partial-clone:
cache-tree: skip some blob checks in partial clone
When pushing into a repository that borrows its objects from an
alternate object store, "git receive-pack" that responds to the
push request on the other side lists the tips of refs in the
alternate to reduce the amount of objects transferred. This
sometimes is detrimental when the number of refs in the alternate
is absurdly large, in which case the bandwidth saved in potentially
fewer objects transferred is wasted in excessively large ref
advertisement. The alternate refs that are advertised are now
configurable with a pair of configuration variables.
* tb/filter-alternate-refs:
transport.c: introduce core.alternateRefsPrefixes
transport.c: introduce core.alternateRefsCommand
transport.c: extract 'fill_alternate_refs_command'
transport: drop refnames from for_each_alternate_ref
Over some transports, fetching objects with an exact commit object
name can be done without first seeing the ref advertisements. The
code has been optimized to exploit this.
* jt/avoid-ls-refs:
fetch: do not list refs if fetching only hashes
transport: list refs before fetch if necessary
transport: do not list refs if possible
transport: allow skipping of ref listing
A partial clone that is configured to lazily fetch missing objects
will on-demand issue a "git fetch" request to the originating
repository to fill not-yet-obtained objects. The request has been
optimized for requesting a tree object (and not the leaf blob
objects contained in it) by telling the originating repository that
no blobs are needed.
* jt/non-blob-lazy-fetch:
fetch-pack: exclude blobs when lazy-fetching trees
fetch-pack: avoid object flags if no_dependents
The oidset API was built on top of the oidmap API which in turn is
on the hashmap API. Replace the implementation to build on top of
the khash API and gain performance.
* rs/oidset-on-khash:
oidset: uninline oidset_init()
oidset: use khash
khash: factor out kh_release_*
fetch-pack: load tip_oids eagerly iff needed
fetch-pack: factor out is_unmatched_ref()
Unlike "grep", "git grep" by default recurses to the whole tree.
The command learned "git grep --recursive" option, so that "git
grep --no-recursive" can serve as a synonym to setting the
max-depth to 0.
* rs/grep-no-recursive:
grep: add -r/--[no-]recursive
"git help -a" and "git help -av" give different pieces of
information, and generally the "verbose" version is more friendly
to the new users. "git help -a" by default now uses the more
verbose output (with "--no-verbose", you can go back to the
original). Also "git help -av" now lists aliases and external
commands, which it did not used to.
* nd/help-commands-verbose-by-default:
help -a: improve and make --verbose default
"git fetch $repo $object" in a partial clone did not correctly
fetch the asked-for object that is referenced by an object in
promisor packfile, which has been fixed.
* jt/fetch-tips-in-partial-clone:
fetch: in partial clone, check presence of targets
connected: document connectivity in partial clones
"git status" learns to show progress bar when refreshing the index
takes a long time.
* nd/status-refresh-progress:
status: show progress bar if refreshing the index takes too long
A new extension to the index file has been introduced, which allows
the file to be read in parallel.
* bp/read-cache-parallel:
read-cache: load cache entries on worker threads
ieot: add Index Entry Offset Table (IEOT) extension
read-cache: load cache extensions on a worker thread
config: add new index.threads config setting
eoie: add End of Index Entry (EOIE) extension
read-cache: clean up casting and byte decoding
read-cache.c: optimize reading index format v4
Some environment variables that control the runtime options of Git
used during tests are getting renamed for consistency.
* bp/rename-test-env-var:
t0000: do not get self-test disrupted by environment warnings
preload-index: update GIT_FORCE_PRELOAD_TEST support
read-cache: update TEST_GIT_INDEX_VERSION support
fsmonitor: update GIT_TEST_FSMONITOR support
preload-index: use git_env_bool() not getenv() for customization
t/README: correct spelling of "uncommon"
Code clean-up in the internal machinery used by "git status" and
"git commit --dry-run".
* ss/wt-status-committable:
roll wt_status_state into wt_status and populate in the collect phase
wt-status.c: set the committable flag in the collect phase
t7501: add test of "commit --dry-run --short"
wt-status: rename commitable to committable
wt-status.c: move has_unmerged earlier in the file
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
Teach bash completion that "git fetch --multiple" only takes remote
names as arguments and no refspecs.
* nd/complete-fetch-multiple-args:
completion: support "git fetch --multiple"
Suppose a server has the following commit graph:
A B
\ /
O
We create a client by cloning A from the server with depth 1, and add
many commits to it (so that future fetches span multiple requests due to
lengthy negotiation). If it then fetches B using protocol v2, the fetch
spanning multiple requests, the resulting packfile does not contain O
even though the client did report that A is shallow.
This is because upload_pack_v2() can be called multiple times while
processing the same session. During the 2nd and all subsequent
invocations, some object flags remain from the previous invocations. In
particular, CLIENT_SHALLOW remains, preventing process_shallow() from
adding client-reported shallows to the "shallows" array, and hence
pack-objects not knowing about these client-reported shallows.
Therefore, teach upload_pack_v2() to clear object flags at the start of
each invocation. This has some other results:
- THEY_HAVE gates addition of objects to have_obj in process_haves().
Previously in upload_pack_v2(), have_obj needed to be static because
once an object is added to have_obj, it is never readded and thus we
needed to retain the contents of have_obj between invocations. Now
that flags are cleared, this is no longer necessary. This patch does
not change the behavior of ok_to_give_up() (THEY_HAVE is still set on
each "have") and got_oid() (used only in non-v2)); THEY_HAVE is not
used in any other function.
- WANTED gates addition of objects to want_obj in parse_want() and
parse_want_ref(). It is also used in receive_needs(), but that is
only used in non-v2. For the same reasons as THEY_HAVE, want_obj no
longer needs to be static in upload_pack_v2().
- CLIENT_SHALLOW is changed as discussed above.
Clearing of the other 5 flags does not affect functionality in v2. (Note
that in non-v2, upload_pack() is only called once per process, so each
invocation starts with blank flags anyway.)
- OUR_REF is only used in non-v2.
- COMMON_KNOWN is only used as a scratch flag in ok_to_give_up().
- SHALLOW is passed to invocations in deepen() and
deepen_by_rev_list(), but upload-pack doesn't use it.
- NOT_SHALLOW is used by send_shallow() and send_unshallow(), but
invocations of those functions are always preceded by code that sets
NOT_SHALLOW on the appropriate objects.
- HIDDEN_REF is only used in non-v2.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because upload_pack_v2() can be invoked multiple times in the same
process, the static variable want_obj may not be empty when it is
invoked. To make further analysis of this situation easier, make the
variable local; analysis will be done in a subsequent patch.
The new local variable in upload_pack_v2() is static to preserve
existing behavior; this is not necessary in upload_pack() because
upload_pack() is only invoked once per process.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because upload_pack_v2() can be invoked multiple times in the same
process, the static variable have_obj may not be empty when it is
invoked. To make further analysis of this situation easier, make the
variable local; analysis will be done in a subsequent patch.
The new local variable in upload_pack_v2() is static to preserve
existing behavior; this is not necessary in upload_pack() because
upload_pack() is only invoked once per process.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The algorithm in can_all_from_reach_with_flags() performs a depth-
first-search, terminated by generation number, intending to use
a hueristic that "important" commits are found in the first-parent
history. This heuristic is valuable in scenarios like fetch
negotiation.
However, there is a problem! After the search finds a target commit,
it should pop all commits off the stack and mark them as "can reach".
This logic is incorrect, so the algorithm instead walks all reachable
commits above the generation-number cutoff.
The existing algorithm is still an improvement over the previous
algorithm, as the worst-case complexity went from quadratic to linear.
The performance measurement at the time was good, but not dramatic.
By fixing this heuristic, we reduce the number of walked commits.
We can also re-run the performance tests from commit 4fbcca4e
"commit-reach: make can_all_from_reach... linear".
Performance was measured on the Linux repository using
'test-tool reach can_all_from_reach'. The input included rows seeded by
tag values. The "small" case included X-rows as v4.[0-9]* and Y-rows as
v3.[0-9]*. This mimics a (very large) fetch that says "I have all major
v3 releases and want all major v4 releases." The "large" case included
X-rows as "v4.*" and Y-rows as "v3.*". This adds all release-candidate
tags to the set, which does not greatly increase the number of objects
that are considered, but does increase the number of 'from' commits,
demonstrating the quadratic nature of the previous code.
Small Case:
4fbcca4e~1: 0.85 s
4fbcca4e: 0.26 s (num_walked: 1,011,035)
HEAD: 0.14 s (num_walked: 8,601)
Large Case:
4fbcca4e~1: 24.0 s
4fbcca4e: 0.12 s (num_walked: 503,925)
HEAD: 0.06 s (num_walked: 217,243)
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Release item->value.
Initialize item->value->s dynamically and then release its resources.
Release some local variables.
Final goal of this patch is to reduce number of memory leaks.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use ref_array_clear() to release memory instead of UNLEAK macros.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Release memory from used_atom variable for reducing number of memory
leaks.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>