:(glob)path differs from plain pathspec that it uses wildmatch with
WM_PATHNAME while the other uses fnmatch without FNM_PATHNAME. The
difference lies in how '*' (and '**') is processed.
With the introduction of :(glob) and :(literal) and their global
options --[no]glob-pathspecs, the user can:
- make everything literal by default via --noglob-pathspecs
--literal-pathspecs cannot be used for this purpose as it
disables _all_ pathspec magic.
- individually turn on globbing with :(glob)
- make everything globbing by default via --glob-pathspecs
- individually turn off globbing with :(literal)
The implication behind this is, there is no way to gain the default
matching behavior (i.e. fnmatch without FNM_PATHNAME). You either get
new globbing or literal. The old fnmatch behavior is considered
deprecated and discouraged to use.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--literal-pathspecs and its equivalent environment variable are
probably used for scripting. In that setting, pathspec magic may be
unwanted. Disabling globbing in individual pathspec can be done via
:(literal) magic.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-ignore (at least the test suite) seems to rely on the pattern
order. PATHSPEC_KEEP_ORDER is introduced to explictly express this.
The lack of PATHSPEC_MAXDEPTH_VALID is sufficient because it's the
only flag that reorders pathspecs, but it's less obvious that way.
Cc: Adam Spiers <git@adamspiers.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"log --format=" did not honor i18n.logoutputencoding configuration
and this attempts to fix it.
* as/log-output-encoding-in-user-format:
t4205 (log-pretty-formats): avoid using `sed`
t6006 (rev-list-format): add tests for "%b" and "%s" for the case i18n.commitEncoding is not set
t4205, t6006, t7102: make functions better readable
t4205 (log-pretty-formats): revert back single quotes
t4041, t4205, t6006, t7102: use iso8859-1 rather than iso-8859-1
t4205: replace .\+ with ..* in sed commands
pretty: --format output should honor logOutputEncoding
pretty: Add failing tests: --format output should honor logOutputEncoding
t4205 (log-pretty-formats): don't hardcode SHA-1 in expected outputs
t7102 (reset): don't hardcode SHA-1 in expected outputs
t6006 (rev-list-format): don't hardcode SHA-1 in expected outputs
A test that should have failed but didn't revealed a bug that needs
to be corrected.
* jc/t1512-fix:
get_short_sha1(): correctly disambiguate type-limited abbreviation
t1512: correct leftover constants from earlier edition
"git stash save" is not just about "saving" the local changes, but
also is to restore the working tree state to that of HEAD. If you
changed a non-directory into a directory in the local change, you
may have untracked files in that directory, which have to be killed
while doing so, unless you run it with --include-untracked. Teach
the command to detect and error out before spreading the damage.
This needed a small fix to "ls-files --killed".
* pb/stash-refuse-to-kill:
git stash: avoid data loss when "git stash save" kills a directory
treat_directory(): do not declare submodules to be untracked
"git diff" refused to even show difference when core.safecrlf is
set to true (i.e. error out) and there are offending lines in the
working tree files.
* jc/maint-diff-core-safecrlf:
diff: demote core.safecrlf=true to core.safecrlf=warn
"git status" learned status.branch and status.short configuration
variables to use --branch and --short options by default (override
with --no-branch and --no-short options from the command line).
* jg/status-config:
status/commit: make sure --porcelain is not affected by user-facing config
commit: make it work with status.short
status: introduce status.branch to enable --branch by default
status: introduce status.short to enable --short by default
Invocations of "git checkout" used internally by "git rebase" were
counted as "checkout", and affected later "git checkout -" to the
the user to an unexpected place.
* rr/rebase-checkout-reflog:
checkout: respect GIT_REFLOG_ACTION
status: do not depend on rebase reflog messages
t/t2021-checkout-last: "checkout -" should work after a rebase finishes
wt-status: remove unused field in grab_1st_switch_cbdata
t7512: test "detached from" as well
Earlier remote.pushdefault (and per-branch branch.*.pushremote)
were introduced as an additional mechanism to choose what
repository to push into when "git push" did not say it from the
command line, to help people who push to a repository that is
different from where they fetch from. This attempts to finish that
topic by teaching the default mechanism to choose branch in the
remote repository to be updated by such a push.
The 'current', 'matching' and 'nothing' modes (specified by the
push.default configuration variable) extend to such a "triangular"
workflow naturally, but 'upstream' and 'simple' have to be updated.
. 'upstream' is about pushing back to update the branch in the
remote repository that the current branch fetches from and
integrates with, it errors out in a triangular workflow.
. 'simple' is meant to help new people by avoiding mistakes, and
will be the safe default in Git 2.0.
In a non-triangular workflow, it will continue to act as a cross
between 'upstream' and 'current' in that it pushes to the current
branch's @{upstream} only when it is set to the same name as the
current branch (e.g. your 'master' forks from the 'master' from
the central repository).
In a triangular workflow, this series tentatively defines it as
the same as 'current', but we may have to tighten it to avoid
surprises in some way.
* jc/triangle-push-fixup:
t/t5528-push-default: test pushdefault workflows
t/t5528-push-default: generalize test_push_*
push: change `simple` to accommodate triangular workflows
config doc: rewrite push.default section
t/t5528-push-default: remove redundant test_config lines
Some shells do not understand the one-line construct, and instead need
FOO=bar &&
export FOO
Detect this in the test-lint target.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The == operator as an alias to = is not POSIX. This doesn't actually
matter for the execution of the script, because it only runs when the
shell is bash. However, it trips up test-lint, so it's nicer to use
the standard form.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell syntax "export X=Y A=B" is not understood by all shells.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For testing truncated log messages 'commit_msg' function uses `sed` to
cut a message. On various platforms `sed` behaves differently and
results of its work depend on locales installed. So, avoid using `sed`.
Use predefined expected outputs instead of calculated ones.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In de6029a (pretty: Add failing tests: --format output should honor
logOutputEncoding, 2013-06-26) 'complex-subject' test was changed.
Revert it back, because that change actually removed tests for "%b"
and "%s" with i18n.commitEncoding set. Also, add two more tests for
mentioned above "%b" and "%s" to test encoding conversions with no
i18n.commitEncoding set.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Suggested-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Function 'test_format' has become harder to read after its change in
de6029a2 (pretty: Add failing tests: --format output should honor
logOutputEncoding, 2013-06-26). Simplify it by moving its "should we
expect it to fail?" parameter to the end.
Note, current code does not use this last parameter as far as there
are no tests expected to fail. We can keep that for future use.
Also, reformat comments.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Improved-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previuos commit de6029a (pretty: Add failing tests: --format output
should honor logOutputEncoding, 2013-06-26) single quotes were replaced
with double quotes to make "$(commit_msg)" expression in heredoc to
work. The same effect can be achieved by using "EOF" as a heredoc
delimiter instead of "\EOF".
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Suggested-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows N instances of tests run in parallel, each running 1/N parts
of the test suite under Valgrind, to speed things up.
* tr/test-v-and-v-subtest-only:
perf-lib: fix start/stop of perf tests
test-lib: support running tests under valgrind in parallel
test-lib: allow prefixing a custom string before "ok N" etc.
test-lib: valgrind for only tests matching a pattern
test-lib: verbose mode for only tests matching a pattern
test-lib: self-test that --verbose works
test-lib: rearrange start/end of test_expect_* and test_skip
test-lib: refactor $GIT_SKIP_TESTS matching
test-lib: enable MALLOC_* for the actual tests
Do not use FIFOs on cygwin, they do not work. Cygwin includes
coreutils, so has mkfifo, and that command does something. However,
the resultant named pipe is known (on the Cygwin mailing list at
least) to not work correctly.
This disables PIPE for Cygwin, allowing t0008.sh to complete (all other
tests in that file work correctly).
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both "iso8859-1" and "iso-8859-1" are understood as latin-1 by
modern platforms, but the latter is not understood by older
platforms;update tests to use the former.
This is in line with 3994e8a9 (t4201: use ISO8859-1 rather than
ISO-8859-1, 2009-12-03), which did the same.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/empty-archive:
t5004: resurrect original empty tar archive test
t5004: avoid using tar for checking emptiness of archive
Conflicts:
t/t5004-archive-corner-cases.sh
"git log -c --follow $path" segfaulted upon hitting the commit that
renamed the $path being followed.
* cb/log-follow-with-combined:
fix segfault with git log -c --follow
When a reflog notation is used for implicit "current branch", we did
not say which branch, and worse said "branch ''".
* rr/die-on-missing-upstream:
sha1_name: fix error message for @{<N>}, @{<date>}
sha1_name: fix error message for @{u}
Fix a typo ("remote remote-tracking") going back to the big cleanup
in 2010 (8b3f3f84 etc). Also, remove some more occurrences of
"tracking" and "remote tracking" in favor of "remote-tracking".
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge strategy and its options can be specified in `git rebase`,
but with `--interactive`, they were completely ignored.
Signed-off-by: Arnaud Fontaine <arnau@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earliest iteration of this test script used a magic string
110282 as the common prefix for ambiguous object names, but the
final edition switched the common prefix to 0000000000 (10 "0"s).
Unfortunately, instances of the original prefix were left in the
comments and a few tests. Replace them with the correct constants.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"stash save" is about saving the local change to the working tree,
but also about restoring the state of the last commit to the working
tree. When a local change is to turn a non-directory to a directory,
in order to restore the non-directory, everything in the directory
needs to be removed.
Which is fine when running "git stash save --include-untracked",
but without that option, untracked, newly created files in the
directory will have to be discarded, if the state you are restoring
to has a non-directory at the same path as the directory.
Introduce a safety valve to fail the operation in such case, using
the "ls-files --killed" which was designed for this exact purpose.
The "stash save" is stopped when untracked files need to be
discarded because their leading path ceased to be a directory, and
the user is required to pass --force to really have the data
removed.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the working tree walker encounters a directory, it asks the
function treat_directory() if it should descend into it, show it as
an untracked directory, or do something else. When the directory is
the top of the submodule working tree, we used to say "That is an
untracked directory", which was bogus.
It is an entity that is tracked in the index of the repository we
are looking at, and that is not to be descended into it. Return
path_none, not path_untracked, to report that.
The existing case that path_untracked is returned for a newly
discovered submodule that is not tracked in the index (this only
happens when DIR_NO_GITLINKS option is not used) is unchanged, but
that is exactly because the submodule is not tracked in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original way to specify remote repository using .git/branches/
used to have a nifty feature. The code to support the feature was
still in a function but the caller was changed not to call it 5
years ago, breaking that feature and leaving the supporting code
unreachable.
* rr/remote-branch-config-refresh:
t/t5505-remote: test multiple push/pull in remotes-file
ls-remote doc: don't encourage use of branches-file
ls-remote doc: rewrite <repository> paragraph
ls-remote doc: fix example invocation on git.git
t/t5505-remote: test url-with-# in branches-file
remote: remove dead code in read_branches_file()
t/t5505-remote: use test_path_is_missing
t/t5505-remote: test push-refspec in branches-file
t/t5505-remote: modernize style
Code clean-up for in-prompt status script (in contrib/).
* ed/color-prompt:
git-prompt.sh: add missing information in comments
git-prompt.sh: do not print duplicate clean color code
t9903: remove redundant tests
git-prompt.sh: refactor colored prompt code
t9903: add tests for git-prompt pcmode
Having multiple "fixup!" on a line in the rebase instruction sheet
did not work very well with "git rebase -i --autosquash".
* ap/rebase-multiple-fixups:
lib-rebase: style: use write_script, <<-\EOF
rebase -i: handle fixup! fixup! in --autosquash
* sg/bash-prompt:
bash prompt: mention that PROMPT_COMMAND mode is faster
bash prompt: avoid command substitution when finalizing gitstring
bash prompt: avoid command substitution when checking for untracked files
bash prompt: use bash builtins to check stash state
bash prompt: use bash builtins to check for unborn branch for dirty state
bash prompt: combine 'git rev-parse' for detached head
bash prompt: combine 'git rev-parse' executions in the main code path
bash prompt: use bash builtins to find out current branch
bash prompt: use bash builtins to find out rebase state
bash prompt: run 'git rev-parse --git-dir' directly instead of __gitdir()
bash prompt: return early from __git_ps1() when not in a git repository
bash prompt: print unique detached HEAD abbreviated object name
bash prompt: add a test for symbolic link symbolic refs
completion, bash prompt: move __gitdir() tests to completion test suite
bash prompt: use 'write_script' helper in interactive rebase test
bash prompt: fix redirection coding style in tests
Update documentation to match more recent realities.
* wk/doc-in-linux-3.x-era:
Documentation: Update 'linux-2.6.git' -> 'linux.git'
Documentation: Update the NFS remote examples to use the staging repo
doc/clone: Pick more compelling paths for the --reference example
doc/clone: Remove the '--bare -l -s' example
"git log" learned the "--author-date-order" option, with which the
output is topologically sorted and commits in parallel histories
are shown intermixed together based on the author timestamp.
* jc/topo-author-date-sort:
t6003: add --author-date-order test
topology tests: teach a helper to set author dates as well
t6003: add --date-order test
topology tests: teach a helper to take abbreviated timestamps
t/lib-t6000: style fixes
log: --author-date-order
sort-in-topological-order: use prio-queue
prio-queue: priority queue of pointers to structs
toposort: rename "lifo" field
OS X's sed only accepts basic regular expressions, which does not
allow the + quantifier. However '..*' (anything, followed by zero or
more anything) is the same as '.\+' (one or more anything) and valid
in any regular expression language.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
