Add an Accept-Language header which indicates the user's preferred
languages defined by $LANGUAGE, $LC_ALL, $LC_MESSAGES and $LANG.
Examples:
LANGUAGE= -> ""
LANGUAGE=ko:en -> "Accept-Language: ko, en;q=0.9, *;q=0.1"
LANGUAGE=ko LANG=en_US.UTF-8 -> "Accept-Language: ko, *;q=0.1"
LANGUAGE= LANG=en_US.UTF-8 -> "Accept-Language: en-US, *;q=0.1"
This gives git servers a chance to display remote error messages in
the user's preferred language.
Limit the number of languages to 1,000 because q-value must not be
smaller than 0.001, and limit the length of Accept-Language header to
4,000 bytes for some HTTP servers which cannot accept such long header.
Signed-off-by: Yi EungJun <eungjun.yi@navercorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow "git push" request to be signed, so that it can be verified and
audited, using the GPG signature of the person who pushed, that the
tips of branches at a public repository really point the commits
the pusher wanted to, without having to "trust" the server.
* jc/push-cert: (24 commits)
receive-pack::hmac_sha1(): copy the entire SHA-1 hash out
signed push: allow stale nonce in stateless mode
signed push: teach smart-HTTP to pass "git push --signed" around
signed push: fortify against replay attacks
signed push: add "pushee" header to push certificate
signed push: remove duplicated protocol info
send-pack: send feature request on push-cert packet
receive-pack: GPG-validate push certificates
push: the beginning of "git push --signed"
pack-protocol doc: typofix for PKT-LINE
gpg-interface: move parse_signature() to where it should be
gpg-interface: move parse_gpg_output() to where it should be
send-pack: clarify that cmds_sent is a boolean
send-pack: refactor inspecting and resetting status and sending commands
send-pack: rename "new_refs" to "need_pack_data"
receive-pack: factor out capability string generation
send-pack: factor out capability string generation
send-pack: always send capabilities
send-pack: refactor decision to send update per ref
send-pack: move REF_STATUS_REJECT_NODELETE logic a bit higher
...
The number of refs that can be pushed at once over smart HTTP was
limited by the command line length. The limitation has been lifted
by passing these refs from the standard input of send-pack.
* jk/send-pack-many-refspecs:
send-pack: take refspecs over stdin
The "--signed" option received by "git push" is first passed to the
transport layer, which the native transport directly uses to notice
that a push certificate needs to be sent. When the transport-helper
is involved, however, the option needs to be told to the helper with
set_helper_option(), and the helper needs to take necessary action.
For the smart-HTTP helper, the "necessary action" involves spawning
the "git send-pack" subprocess with the "--signed" option.
Once the above all gets wired in, the smart-HTTP transport now can
use the push certificate mechanism to authenticate its pushes.
Add a test that is modeled after tests for the native transport in
t5534-push-signed.sh to t5541-http-push-smart.sh. Update the test
Apache configuration to pass GNUPGHOME environment variable through.
As PassEnv would trigger warnings for an environment variable that
is not set, export it from test-lib.sh set to a harmless value when
GnuPG is not being used in the tests.
Note that the added test is deliberately loose and does not check
the nonce in this step. This is because the stateless RPC mode is
inevitably flaky and a nonce that comes back in the actual push
processing is one issued by a different process; if the two
interactions with the server crossed a second boundary, the nonces
will not match and such a check will fail. A later patch in the
series will work around this shortcoming.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing a large number of refs works over most transports,
because we implement send-pack as an internal function.
However, it can sometimes fail when pushing over http,
because we have to spawn "git send-pack --stateless-rpc" to
do the heavy lifting, and we pass each refspec on the
command line. This can cause us to overflow the OS limits on
the size of the command line for a large push.
We can solve this by giving send-pack a --stdin option and
using it from remote-curl. We already dealt with this on
the fetch-pack side in 078b895 (fetch-pack: new --stdin
option to read refs from stdin, 2012-04-02). The stdin
option (and in particular, its use of packet-lines for
stateless-rpc input) is modeled after that solution.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most struct child_process variables are cleared using memset first after
declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead. That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/remote-curl-squelch-extra-errors:
remote-curl: mark helper-protocol errors more clearly
remote-curl: use error instead of fprintf(stderr)
remote-curl: do not complain on EOF from parent git
When we encounter an error in remote-curl, we generally just
report it to stderr. There is no need for the user to care
that the "could not connect to server" error was generated
by git-remote-https rather than a function in the parent
git-fetch process.
However, when the error is in the protocol between git and
the helper, it makes sense to clearly identify which side is
complaining. These cases shouldn't ever happen, but when
they do, we can make them less confusing by being more
verbose.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We usually prefix our error messages with "error: ", but
many error messages from remote-curl are simply printed with
fprintf. This can make the output a little harder to read
(especially because such message may be intermingled with
errors from the parent git process).
There is no reason to avoid error(), as we are already
calling it many places (in addition to libgit.a functions
which use it).
While we're adjusting the messages, we can also drop the
capitalization which makes them unlike other git error
messages.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parent git process is supposed to send us an empty line
to indicate that the conversation is over. However, the
parent process may die() if there is a problem with the
operation (e.g., we try to fetch a ref that does not exist).
In this case, it produces a useful message, but then
remote-curl _also_ produces an unhelpful message:
$ git pull origin matser
fatal: couldn't find remote ref matser
Unexpected end of command stream
The "right" way to fix this is to teach the parent git to
always cleanly close the connection to the helper, letting
it know that we are done. Implementing that is rather
clunky, though, as it would involve either replacing die()
operations with returning errors up the stack (until we
disconnect the transport), or adding an atexit handler to
clean up any transport helpers left open.
It's much simpler to just suppress the EOF message in
remote-curl. It was not added to address any real-world
situation in the first place, but rather a "we should
probably report unexpected things" suggestion[1].
It is the parent git which drives the operation, and whose
exit value actually matters. If the parent dies, then the
helper has no need to complain (except as a debugging aid).
In the off chance that the pipe is closed without the parent
dying, it can still notice the non-zero exit code.
[1] http://article.gmane.org/gmane.comp.version-control.git/176036
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a common idiom to match a prefix and then skip past it
with strlen, like:
if (starts_with(foo, "bar"))
foo += strlen("bar");
This avoids magic numbers, but means we have to repeat the
string (and there is no compiler check that we didn't make a
typo in one of the strings).
We can use skip_prefix to handle this case without repeating
ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently recognize an error message with a content-type
"text/plain; charset=utf-16" as text, but we ignore the
charset parameter entirely. Let's encode it to
log_output_encoding, which is presumably something the
user's terminal can handle.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we get a content-type from curl, we get the whole
header line, including any parameters, and without any
normalization (like downcasing or whitespace) applied.
If we later try to match it with strcmp() or even
strcasecmp(), we may get false negatives.
This could cause two visible behaviors:
1. We might fail to recognize a smart-http server by its
content-type.
2. We might fail to relay text/plain error messages to
users (especially if they contain a charset parameter).
This patch teaches the http code to extract and normalize
just the type/subtype portion of the string. This is
technically passing out less information to the callers, who
can no longer see the parameters. But none of the current
callers cares, and a future patch will add back an
easier-to-use method for accessing those parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently don't reuse http connections when fetching via
the smart-http protocol. This is bad because the TCP
handshake introduces latency, and especially because SSL
connection setup may be non-trivial.
We can fix it by consistently using curl's "multi"
interface. The reason is rather complicated:
Our http code has two ways of being used: queuing many
"slots" to be fetched in parallel, or fetching a single
request in a blocking manner. The parallel code is built on
curl's "multi" interface. Most of the single-request code
uses http_request, which is built on top of the parallel
code (we just feed it one slot, and wait until it finishes).
However, one could also accomplish the single-request scheme
by avoiding curl's multi interface entirely and just using
curl_easy_perform. This is simpler, and is used by post_rpc
in the smart-http protocol.
It does work to use the same curl handle in both contexts,
as long as it is not at the same time. However, internally
curl may not share all of the cached resources between both
contexts. In particular, a connection formed using the
"multi" code will go into a reuse pool connected to the
"multi" object. Further requests using the "easy" interface
will not be able to reuse that connection.
The smart http protocol does ref discovery via http_request,
which uses the "multi" interface, and then follows up with
the "easy" interface for its rpc calls. As a result, we make
two HTTP connections rather than reusing a single one.
We could teach the ref discovery to use the "easy"
interface. But it is only once we have done this discovery
that we know whether the protocol will be smart or dumb. If
it is dumb, then our further requests, which want to fetch
objects in parallel, will not be able to reuse the same
connection.
Instead, this patch switches post_rpc to build on the
parallel interface, which means that we use it consistently
everywhere. It's a little more complicated to use, but since
we have the infrastructure already, it doesn't add any code;
we can just factor out the relevant bits from http_request.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
No callers pass a non-empty pointer as shallow_points at this
stage. As a result, all clients still refuse to talk to shallow
repository on the other end.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Issue "100 Continue" responses to help use of GSS-Negotiate
authentication scheme over HTTP transport when needed.
* bc/http-100-continue:
remote-curl: fix large pushes with GSSAPI
remote-curl: pass curl slot_results back through run_slot
http: return curl's AUTHAVAIL via slot_results
Due to an interaction between the way libcurl handles GSSAPI
authentication over HTTP and the way git uses libcurl, large
pushes (those over http.postBuffer bytes) would fail due to
an authentication failure requiring a rewind of the curl
buffer. Such a rewind was not possible because the data did
not fit into the entire buffer.
Enable the use of the Expect: 100-continue header for large
requests where the server offers GSSAPI authentication to
avoid this issue, since the request would otherwise fail.
This allows git to get the authentication data right before
sending the pack contents. Existing cases where pushes
would succeed, including small requests using GSSAPI, still
disable the use of 100 Continue, as it causes problems for
some remote HTTP implementations (servers and proxies).
Signed-off-by: Brian M. Carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Some callers may want to know more than just the integer
error code we return. Let them optionally pass a
slot_results struct to fill in (or NULL if they do not
care). In either case we continue to return the integer
code.
We can also give probe_rpc the same treatment (since it
builds directly on run_slot).
Signed-off-by: Jeff King <peff@peff.net>
Handle the case where http transport gets redirected during the
authorization request better.
* jk/http-auth-redirects:
http.c: Spell the null pointer as NULL
remote-curl: rewrite base url from info/refs redirects
remote-curl: store url as a strbuf
remote-curl: make refs_url a strbuf
http: update base URLs when we see redirects
http: provide effective url to callers
http: hoist credential request out of handle_curl_result
http: refactor options to http_get_*
http_request: factor out curlinfo_strbuf
http_get_file: style fixes
For efficiency and security reasons, an earlier commit in
this series taught http_get_* to re-write the base url based
on redirections we saw while making a specific request.
This commit wires that option into the info/refs request,
meaning that a redirect from
http://example.com/foo.git/info/refs
to
https://example.com/bar.git/info/refs
will behave as if "https://example.com/bar.git" had been
provided to git in the first place.
The tests bear some explanation. We introduce two new
hierearchies into the httpd test config:
1. Requests to /smart-redir-limited will work only for the
initial info/refs request, but not any subsequent
requests. As a result, we can confirm whether the
client is re-rooting its requests after the initial
contact, since otherwise it will fail (it will ask for
"repo.git/git-upload-pack", which is not redirected).
2. Requests to smart-redir-auth will redirect, and require
auth after the redirection. Since we are using the
redirected base for further requests, we also update
the credential struct, in order not to mislead the user
(or credential helpers) about which credential is
needed. We can therefore check the GIT_ASKPASS prompts
to make sure we are prompting for the new location.
Because we have neither multiple servers nor https
support in our test setup, we can only redirect between
paths, meaning we need to turn on
credential.useHttpPath to see the difference.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
We use a strbuf to generate the string containing the remote
URL, but then detach it to a bare pointer. This makes it
harder to later manipulate the URL, as we have forgotten the
length (and the allocation semantics are not as clear).
Let's instead keep the strbuf around. As a bonus, this
eliminates a confusing double-use of the "buf" strbuf in
main(). Prior to this, it was used both for constructing the
url, and for reading commands from stdin.
The downside is that we have to update each call site to
refer to "url.buf" rather than just "url" when they want the
C string.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
In the discover_refs function, we use a strbuf named
"buffer" for multiple purposes. First we build the info/refs
URL in it, and then detach that to a bare pointer. Then, we
use the same strbuf to store the result of fetching the
refs.
Let's instead keep a separate refs_url strbuf. This is less
confusing, as the "buffer" strbuf is now used for only one
thing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
When we are handling a curl response code in http_request or
in the remote-curl RPC code, we use the handle_curl_result
helper to translate curl's response into an easy-to-use
code. When we see an HTTP 401, we do one of two things:
1. If we already had a filled-in credential, we mark it as
rejected, and then return HTTP_NOAUTH to indicate to
the caller that we failed.
2. If we didn't, then we ask for a new credential and tell
the caller HTTP_REAUTH to indicate that they may want
to try again.
Rejecting in the first case makes sense; it is the natural
result of the request we just made. However, prompting for
more credentials in the second step does not always make
sense. We do not know for sure that the caller is going to
make a second request, and nor are we sure that it will be
to the same URL. Logically, the prompt belongs not to the
request we just finished, but to the request we are (maybe)
about to make.
In practice, it is very hard to trigger any bad behavior.
Currently, if we make a second request, it will always be to
the same URL (even in the face of redirects, because curl
handles the redirects internally). And we almost always
retry on HTTP_REAUTH these days. The one exception is if we
are streaming a large RPC request to the server (e.g., a
pushed packfile), in which case we cannot restart. It's
extremely unlikely to see a 401 response at this stage,
though, as we would typically have seen it when we sent a
probe request, before streaming the data.
This patch drops the automatic prompt out of case 2, and
instead requires the caller to do it. This is a few extra
lines of code, and the bug it fixes is unlikely to come up
in practice. But it is conceptually cleaner, and paves the
way for better handling of credentials across redirects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Over time, the http_get_strbuf function has grown several
optional parameters. We now have a bitfield with multiple
boolean options, as well as an optional strbuf for returning
the content-type of the response. And a future patch in this
series is going to add another strbuf option.
Treating these as separate arguments has a few downsides:
1. Most call sites need to add extra NULLs and 0s for the
options they aren't interested in.
2. The http_get_* functions are actually wrappers around
2 layers of low-level implementation functions. We have
to pass these options through individually.
3. The http_get_strbuf wrapper learned these options, but
nobody bothered to do so for http_get_file, even though
it is backed by the same function that does understand
the options.
Let's consolidate the options into a single struct. For the
common case of the default options, we'll allow callers to
simply pass a NULL for the options struct.
The resulting code is often a few lines longer, but it ends
up being easier to read (and to change as we add new
options, since we do not need to update each call site).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Allow a safer "rewind of the remote tip" push than blind "--force",
by requiring that the overwritten remote ref to be unchanged since
the new history to replace it was prepared.
The machinery is more or less ready. The "--force" option is again
the big red button to override any safety, thanks to J6t's sanity
(the original round allowed --lockref to defeat --force).
The logic to choose the default implemented here is fragile
(e.g. "git fetch" after seeing a failure will update the
remote-tracking branch and will make the next "push" pass,
defeating the safety pretty easily). It is suitable only for the
simplest workflows, and it may hurt users more than it helps them.
* jc/push-cas:
push: teach --force-with-lease to smart-http transport
send-pack: fix parsing of --force-with-lease option
t5540/5541: smart-http does not support "--force-with-lease"
t5533: test "push --force-with-lease"
push --force-with-lease: tie it all together
push --force-with-lease: implement logic to populate old_sha1_expect[]
remote.c: add command line option parser for "--force-with-lease"
builtin/push.c: use OPT_BOOL, not OPT_BOOLEAN
cache.h: move remote/connect API out of it
We have been passing enough information to enable the
compare-and-swap logic down to the transport layer, but the
transport helper was not passing it to smart-http transport.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an extension of c6807a4 (clone: open a shortcut for
connectivity check - 2013-05-26) to reduce the cost of connectivity
check at clone time, this time with smart http protocol.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using a hand-managed argument array, use argv-array API
to manage dynamically formulated command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we encounter an unknown http error (e.g., a 403), we
hand the error code to http_error, which then prints it with
error(). After that we die with the redundant message "HTTP
request failed".
Instead, let's just drop http_error entirely, which does
nothing but pass arguments to error(), and instead die
directly with a useful message.
So before:
$ git clone https://example.com/repo.git
Cloning into 'repo'...
error: unable to access 'https://example.com/repo.git': The requested URL returned error: 403 Forbidden
fatal: HTTP request failed
and after:
$ git clone https://example.com/repo.git
Cloning into 'repo'...
fatal: unable to access 'https://example.com/repo.git': The requested URL returned error: 403 Forbidden
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helper function should really be a one-liner that
prints an error message, but it has ended up unnecessarily
complicated:
1. We call error() directly when we fail to start the curl
request, so we must later avoid printing a duplicate
error in http_error().
It would be much simpler in this case to just stuff the
error message into our usual curl_errorstr buffer
rather than printing it ourselves. This means that
http_error does not even have to care about curl's exit
value (the interesting part is in the errorstr buffer
already).
2. We return the "ret" value passed in to us, but none of
the callers actually cares about our return value. We
can just drop this entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we report http errors in fetching the initial ref
advertisement, we show the full URL we attempted to use,
including "info/refs?service=git-upload-pack". While this
may be useful for debugging a broken server, it is
unnecessarily verbose and confusing for most cases, in which
the client user is not even the same person as the owner of
the repository.
Let's just show the repository URL; debugging can happen
with GIT_CURL_VERBOSE, which shows way more useful
information, anyway.
At the same time, let's also make sure to mention the
repository URL when we report failed authentication
(previously we said only "Authentication failed"). Knowing
the URL can help the user realize why authentication failed
(e.g., they meant to push to remote A, not remote B).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we get an http 404 trying to get the initial list of
refs from the server, we try to be helpful and remind the
user that update-server-info may need to be run. This looks
like:
$ git clone https://github.com/non/existent
Cloning into 'existent'...
fatal: https://github.com/non/existent/info/refs?service=git-upload-pack not found: did you run git update-server-info on the server?
Suggesting update-server-info may be a good suggestion for
users who are in control of the server repo and who are
planning to set up dumb http. But for users of smart http,
and especially users who are not in control of the server
repo, the advice is useless and confusing.
Since most people are expected to use smart http these days,
it does not make sense to keep the update-server-info hint.
We not only drop the mention of update-server-info, but also
show only the main repo URL, not the full "info/refs" and
service parameter. These elements may be useful for
debugging a broken server configuration, but in the majority
of cases, users are not fetching from their own
repositories, but rather from other people's repositories;
they have neither the power nor interest to fix a broken
configuration, and the extra components just make the
message more confusing. Users who do want to debug can and
should use GIT_CURL_VERBOSE to get more complete information
on the actual URLs visited.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we get an http 404 trying to get the initial list of
refs from the server, we try to be helpful and remind the
user that update-server-info may need to be run. This looks
like:
$ git clone https://github.com/non/existent
Cloning into 'existent'...
fatal: https://github.com/non/existent/info/refs?service=git-upload-pack not found: did you run git update-server-info on the server?
Suggesting update-server-info may be a good suggestion for
users who are in control of the server repo and who are
planning to set up dumb http. But for users of smart http,
and especially users who are not in control of the server
repo, the advice is useless and confusing.
The previous patch taught remote-curl to show custom advice
from the server when it is available. When we have shown
messages from the server, we can also drop our custom
advice; what the server has to say is likely to be more
accurate and helpful.
We not only drop the mention of update-server-info, but also
show only the main repo URL, not the full "info/refs" and
service parameter. These elements may be useful for
debugging a broken server configuration, but again, anything
the server has provided is likely to be more useful (and one
can still use GIT_CURL_VERBOSE to get much more complete
debugging information).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an http request to a remote git server fails, we show
only the http response code, or sometimes a custom message
for particular codes. This gives the server no opportunity
to offer a more detailed explanation of the reason for the
failure, or to give extra advice.
This patch teaches remote-curl to record and display the
body content of a failed http response. We only display such
responses when the content-type is advertised as text/plain,
as it is the most likely to look presentable on the user's
terminal (and it is hoped to be a good indication that the
message is intended for git clients, and not for a web
browser).
Each line of the new output is prepended with "remote:".
Example output may look like this (assuming the server is
configured to display such a helpful message):
$ GIT_SMART_HTTP=0 git clone https://example.com/some/repo.git
Cloning into 'repo'...
remote: Sorry, fetching via dumb http is forbidden.
remote: Please upgrade your git client to v1.6.6 or greater
remote: and make sure that smart-http is enabled.
error: The requested URL returned error: 403 while accessing http://localhost:5001/some/repo.git/info/refs
fatal: HTTP request failed
For the sake of simplicity, we only record and display these
errors during the initial fetch of the ref list, as that is
the initial contact with the server and where the most
common, interesting errors happen (and there is already
precedent, as that is the only place we currently massage
http error codes into more helpful messages).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When remote-curl receives a list of refs from a server, it
keeps the whole buffer intact. When we get a "list" command,
we feed the result to get_remote_heads, and when we get a
"fetch" or "push" command, we feed it to fetch-pack or
send-pack, respectively.
If the HTTP response from the server is truncated for any
reason, we will get an incomplete ref advertisement. If we
then feed this incomplete list to fetch-pack, one of a few
things may happen:
1. If the truncation is in a packet header, fetch-pack
will notice the bogus line and complain.
2. If the truncation is inside a packet, fetch-pack will
keep waiting for us to send the rest of the packet,
which we never will.
3. If the truncation is at a packet boundary, fetch-pack
will keep waiting for us to send the next packet, which
we never will.
As a result, fetch-pack hangs, waiting for input. However,
remote-curl believes it has sent all of the advertisement,
and therefore waits for fetch-pack to speak. The two
processes end up in a deadlock.
We do notice the broken ref list if we feed it to
get_remote_heads. So if git asks the helper to do a "list"
followed by a "fetch", we are safe; we'll abort during the
list operation, which parses the refs.
This patch teaches remote-curl to always parse and save the
incoming ref list when we read the ref advertisement from a
server. That means that we will always verify and abort
before even running fetch-pack (or send-pack) when reading a
corrupted list, even if we do not run the "list" command
explicitly.
Since we save the result, in the common case of running
"list" then "fetch", we do not do any extra parsing at all.
In the case of just a "fetch", we do an extra round of
parsing, but only once.
Note also that the "fetch" case will now also initialize
server_capabilities from the remote (in remote-curl; we
already would do so inside fetch-pack). Doing "list+fetch"
already does this. It doesn't actually matter now, but the
new behavior is arguably more correct, should remote-curl
ever start caring about the server's capability list.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref-parsing functions are static. Let's move them up in
the file to be available to more functions, which will help
us with later refactoring.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until recently, get_remote_heads only knew how to read refs
from a file descriptor. To hack around this, we spawned a
thread (or forked a process) to write the buffer back to us.
Now that we can just pass it our buffer directly, we don't
have to use this hack anymore.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we can read packet data from memory as easily as a
descriptor, get_remote_heads can take either one as a
source. This will allow further refactoring in remote-curl.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The packet_read function reads from a descriptor. The
packet_get_line function is similar, but reads from an
in-memory buffer, and uses a completely separate
implementation. This patch teaches the generic packet_read
function to accept either source, and we can do away with
packet_get_line's implementation.
There are two other differences to account for between the
old and new functions. The first is that we used to read
into a strbuf, but now read into a fixed size buffer. The
only two callers are fine with that, and in fact it
simplifies their code, since they can use the same
static-buffer interface as the rest of the packet_read_line
callers (and we provide a similar convenience wrapper for
reading from a buffer rather than a descriptor).
This is technically an externally-visible behavior change in
that we used to accept arbitrary sized packets up to 65532
bytes, and now cap out at LARGE_PACKET_MAX, 65520. In
practice this doesn't matter, as we use it only for parsing
smart-http headers (of which there is exactly one defined,
and it is small and fixed-size). And any extension headers
would be breaking the protocol to go over LARGE_PACKET_MAX
anyway.
The other difference is that packet_get_line would return
on error rather than dying. However, both callers of
packet_get_line are actually improved by dying.
The first caller does its own error checking, but we can
drop that; as a result, we'll actually get more specific
reporting about protocol breakage when packet_read dies
internally. The only downside is that packet_read will not
print the smart-http URL that failed, but that's not a big
deal; anybody not debugging can already see the remote's URL
already, and anybody debugging would want to run with
GIT_CURL_VERBOSE anyway to see way more information.
The second caller, which is just trying to skip past any
extra smart-http headers (of which there are none defined,
but which we allow to keep room for future expansion), did
not error check at all. As a result, it would treat an error
just like a flush packet. The resulting mess would generally
cause an error later in get_remote_heads, but now we get
error reporting much closer to the source of the problem.
Brown-paper-bag-fixes-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The packets sent during ref negotiation are all terminated
by newline; even though the code to chomp these newlines is
short, we end up doing it in a lot of places.
This patch teaches packet_read_line to auto-chomp the
trailing newline; this lets us get rid of a lot of inline
chomping code.
As a result, some call-sites which are not reading
line-oriented data (e.g., when reading chunks of packfiles
alongside sideband) transition away from packet_read_line to
the generic packet_read interface. This patch converts all
of the existing callsites.
Since the function signature of packet_read_line does not
change (but its behavior does), there is a possibility of
new callsites being introduced in later commits, silently
introducing an incompatibility. However, since a later
patch in this series will change the signature, such a
commit would have to be merged directly into this commit,
not to the tip of the series; we can therefore ignore the
issue.
This is an internal cleanup and should produce no change of
behavior in the normal case. However, there is one corner
case to note. Callers of packet_read_line have never been
able to tell the difference between a flush packet ("0000")
and an empty packet ("0004"), as both cause packet_read_line
to return a length of 0. Readers treat them identically,
even though Documentation/technical/protocol-common.txt says
we must not; it also says that implementations should not
send an empty pkt-line.
By stripping out the newline before the result gets to the
caller, we will now treat the newline-only packet ("0005\n")
the same as an empty packet, which in turn gets treated like
a flush packet. In practice this doesn't matter, as neither
empty nor newline-only packets are part of git's protocols
(at least not for the line-oriented bits, and readers who
are not expecting line-oriented packets will be calling
packet_read directly, anyway). But even if we do decide to
care about the distinction later, it is orthogonal to this
patch. The right place to tighten would be to stop treating
empty packets as flush packets, and this change does not
make doing so any harder.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just write_or_die by another name. The one
distinction is that write_or_die will treat EPIPE specially
by suppressing error messages. That's fine, as we die by
SIGPIPE anyway (and in the off chance that it is disabled,
write_or_die will simulate it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before parsing a suspected smart-HTTP response verify the returned
Content-Type matches the standard. This protects a client from
attempting to process a payload that smells like a smart-HTTP
server response.
JGit has been doing this check on all responses since the dawn of
time. I mistakenly failed to include it in git-core when smart HTTP
was introduced. At the time I didn't know how to get the Content-Type
from libcurl. I punted, meant to circle back and fix this, and just
plain forgot about it.
Signed-off-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, gcc issues an "'gzip_size' might be used uninitialized"
warning (-Wuninitialized). However, this warning is a false positive,
since the 'gzip_size' variable would not, in fact, be used uninitialized.
In order to suppress the warning, we simply initialise the variable to
zero in it's declaration.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes fetch from servers that ask for auth only during the actual
packing phase. This is not really a recommended configuration, but it
cleans up the code at the same time.
* jk/maint-http-half-auth-fetch:
remote-curl: retry failed requests for auth even with gzip
remote-curl: hoist gzip buffer size to top of post_rpc
Commit b81401c taught the post_rpc function to retry the
http request after prompting for credentials. However, it
did not handle two cases:
1. If we have a large request, we do not retry. That's OK,
since we would have sent a probe (with retry) already.
2. If we are gzipping the request, we do not retry. That
was considered OK, because the intended use was for
push (e.g., listing refs is OK, but actually pushing
objects is not), and we never gzip on push.
This patch teaches post_rpc to retry even a gzipped request.
This has two advantages:
1. It is possible to configure a "half-auth" state for
fetching, where the set of refs and their sha1s are
advertised, but one cannot actually fetch objects.
This is not a recommended configuration, as it leaks
some information about what is in the repository (e.g.,
an attacker can try brute-forcing possible content in
your repository and checking whether it matches your
branch sha1). However, it can be slightly more
convenient, since a no-op fetch will not require a
password at all.
2. It future-proofs us should we decide to ever gzip more
requests.
Signed-off-by: Jeff King <peff@peff.net>
When we gzip the post data for a smart-http rpc request, we
compute the gzip body and its size inside the "use_gzip"
conditional. We keep track of the body after the conditional
ends, but not the size. Let's remember both, which will
enable us to retry failed gzip requests in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Further clean-up to the http codepath that picks up results after
cURL library is done with one request slot.
* jk/maint-http-init-not-in-result-handler:
http: do not set up curl auth after a 401
remote-curl: do not call run_slot repeatedly
Fixes a regression in maint-1.7.11 (v1.7.11.7), maint (v1.7.12.1)
and master (v1.8.0-rc0).
* jk/maint-http-half-auth-push:
http: fix segfault in handle_curl_result
When we get an http 401, we prompt for credentials and put
them in our global credential struct. We also feed them to
the curl handle that produced the 401, with the intent that
they will be used on a retry.
When the code was originally introduced in commit 42653c0,
this was a necessary step. However, since dfa1725, we always
feed our global credential into every curl handle when we
initialize the slot with get_active_slot. So every further
request already feeds the credential to curl.
Moreover, accessing the slot here is somewhat dubious. After
the slot has produced a response, we don't actually control
it any more. If we are using curl_multi, it may even have
been re-initialized to handle a different request.
It just so happens that we will reuse the curl handle within
the slot in such a case, and that because we only keep one
global credential, it will be the one we want. So the
current code is not buggy, but it is misleading.
By cleaning it up, we can remove the slot argument entirely
from handle_curl_result, making it much more obvious that
slots should not be accessed after they are marked as
finished.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b81401c (http: prompt for credentials on failed POST)
taught post_rpc to call run_slot in a loop in order to retry
a request after asking the user for credentials. However,
after a call to run_slot we will have called
finish_active_slot. This means we have released the slot,
and we should no longer look at it.
As it happens, this does not cause any bugs in the current
code, since we know that we are not using curl_multi in this
code path, and therefore nobody will have taken over our
slot in the meantime. However, it is good form to actually
call get_active_slot again. It also future proofs us against
changes in the http code.
We can do this by jumping back to a retry label at the top
of our function. We just need to reorder a few setup lines
that should not be repeated; everything else within the loop
is either idempotent, needs to be repeated, or in a path we
do not follow (e.g., we do not even try when large_request
is set, because we don't know how much data we might have
streamed from our helper program).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we create an http active_request_slot, we can set its
"results" pointer back to local storage. The http code will
fill in the details of how the request went, and we can
access those details even after the slot has been cleaned
up.
Commit 8809703 (http: factor out http error code handling)
switched us from accessing our local results struct directly
to accessing it via the "results" pointer of the slot. That
means we're accessing the slot after it has been marked as
finished, defeating the whole purpose of keeping the results
storage separate.
Most of the time this doesn't matter, as finishing the slot
does not actually clean up the pointer. However, when using
curl's multi interface with the dumb-http revision walker,
we might actually start a new request before handing control
back to the original caller. In that case, we may reuse the
slot, zeroing its results pointer, and leading the original
caller to segfault while looking for its results inside the
slot.
Instead, we need to pass a pointer to our local results
storage to the handle_curl_result function, rather than
relying on the pointer in the slot struct. This matches what
the original code did before the refactoring (which did not
use a separate function, and therefore just accessed the
results struct directly).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows users to turn off smart-http when talking to dumb-only
servers.
* jk/smart-http-switch:
remote-curl: let users turn off smart http
remote-curl: rename is_http variable
Usually there is no need for users to specify whether an
http remote is smart or dumb; the protocol is designed so
that a single initial request is made, and the client can
determine the server's capability from the response.
However, some misconfigured dumb-only servers may not like
the initial request by a smart client, as it contains a
query string. Until recently, commit 703e6e7 worked around
this by making a second request. However, that commit was
recently reverted due to its side effect of masking the
initial request's error code.
Since git has had that workaround for several years, we
don't know exactly how many such misconfigured servers are
out there. The reversion of 703e6e7 assumes they are rare
enough not to worry about. Still, that reversion leaves
somebody who does run into such a server with no escape
hatch at all. Let's give them an environment variable they
can tweak to perform the "dumb" request.
This is intentionally not a documented interface. It's
overly simple and is really there for debugging in case
somebody does complain about git not working with their
server. A real user-facing interface would entail a
per-remote or per-URL config variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't actually care whether the connection is http or
not; what we care about is whether it might be smart http.
Rename the variable to be more accurate, which will make it
easier to later make smart-http optional.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some HTTP servers try to use gzip compression on the /info/refs
request to save transfer bandwidth. Repositories with many tags
may find the /info/refs request can be gzipped to be 50% of the
original size due to the few but often repeated bytes used (hex
SHA-1 and commonly digits in tag names).
For most HTTP requests enable "Accept-Encoding: gzip" ensuring
the /info/refs payload can use this encoding format.
Only request gzip encoding from servers. Although deflate is
supported by libcurl, most servers have standardized on gzip
encoding for compression as that is what most browsers support.
Asking for deflate increases request sizes by a few bytes, but is
unlikely to ever be used by a server.
Disable the Accept-Encoding header on probe RPCs as response bodies
are supposed to be exactly 4 bytes long, "0000". The HTTP headers
requesting and indicating compression use more space than the data
transferred in the body.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 703e6e76a1.
Retrying without the query parameter was added as a workaround
for a single broken HTTP server at git.debian.org[1]. The server
was misconfigured to route every request with a query parameter
into gitweb.cgi. Admins fixed the server's configuration within
16 hours of the bug report to the Git mailing list, but we still
patched Git with this fallback and have been paying for it since.
Most Git hosting services configure the smart HTTP protocol and the
retry logic confuses users when there is a transient HTTP error as
Git dropped the real error from the smart HTTP request. Removing the
retry makes root causes easier to identify.
[1] http://thread.gmane.org/gmane.comp.version-control.git/137609
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the smart-http GET requests go through the http_get_*
functions, which will prompt for credentials and retry if we
see an HTTP 401.
POST requests, however, do not go through any central point.
Moreover, it is difficult to retry in the general case; we
cannot assume the request body fits in memory or is even
seekable, and we don't know how much of it was consumed
during the attempt.
Most of the time, this is not a big deal; for both fetching
and pushing, we make a GET request before doing any POSTs,
so typically we figure out the credentials during the first
request, then reuse them during the POST. However, some
servers may allow a client to get the list of refs from
receive-pack without authentication, and then require
authentication when the client actually tries to POST the
pack.
This is not ideal, as the client may do a non-trivial amount
of work to generate the pack (e.g., delta-compressing
objects). However, for a long time it has been the
recommended example configuration in git-http-backend(1) for
setting up a repository with anonymous fetch and
authenticated push. This setup has always been broken
without putting a username into the URL. Prior to commit
986bbc0, it did work with a username in the URL, because git
would prompt for credentials before making any requests at
all. However, post-986bbc0, it is totally broken. Since it
has been advertised in the manpage for some time, we should
make sure it works.
Unfortunately, it is not as easy as simply calling post_rpc
again when it fails, due to the input issue mentioned above.
However, we can still make this specific case work by
retrying in two specific instances:
1. If the request is large (bigger than LARGE_PACKET_MAX),
we will first send a probe request with a single flush
packet. Since this request is static, we can freely
retry it.
2. If the request is small and we are not using gzip, then
we have the whole thing in-core, and we can freely
retry.
That means we will not retry in some instances, including:
1. If we are using gzip. However, we only do so when
calling git-upload-pack, so it does not apply to
pushes.
2. If we have a large request, the probe succeeds, but
then the real POST wants authentication. This is an
extremely unlikely configuration and not worth worrying
about.
While it might be nice to cover those instances, doing so
would be significantly more complex for very little
real-world gain. In the long run, we will be much better off
when curl learns to internally handle authentication as a
callback, and we can cleanly handle all cases that way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" over smart-http lost progress output a few releases ago.
By Jeff King
* jk/maint-push-progress:
t5541: test more combinations of --progress
teach send-pack about --[no-]progress
send-pack: show progress when isatty(2)
When "git fetch" encounters repositories with too many references, the
command line of "fetch-pack" that is run by a helper e.g. remote-curl, may
fail to hold all of them. Now such an internal invocation can feed the
references through the standard input of "fetch-pack".
By Ivan Todoroski
* it/fetch-pack-many-refs:
remote-curl: main test case for the OS command line overflow
fetch-pack: test cases for the new --stdin option
remote-curl: send the refs to fetch-pack on stdin
fetch-pack: new --stdin option to read refs from stdin
Conflicts:
t/t5500-fetch-pack.sh
The send_pack function gets a "progress" flag saying "yes,
definitely show progress" or "no, definitely do not show
progress". This gets set properly by transport_push when
send_pack is called directly.
However, when the send-pack command is executed separately
(as it is for the remote-curl helper), there is no way to
tell it "definitely do this". As a result, we do not
properly respect "git push --no-progress" for smart-http
remotes; you will still get progress if stderr is a tty.
This patch teaches send-pack --progress and --no-progress,
and teaches remote-curl to pass the appropriate option to
override send-pack's isatty check. This fixes the
--no-progress case above, and as a bonus, also makes "git
push --progress" work when stderr is not a tty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we can throw an arbitrary number of refs at fetch-pack using
its --stdin option, we use it in the remote-curl helper to bypass the
OS command line length limit.
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The protocol between transport-helper.c and remote-curl requires
remote-curl to always print a blank line after the push command
has run. If the blank line is ommitted, transport-helper kills its
container process (the git push the user started) with exit(128)
and no message indicating a problem, assuming the helper already
printed reasonable error text to the console.
However if the remote rejects all branches with "ng" commands in the
report-status reply, send-pack terminates with non-zero status, and
in turn remote-curl exited with non-zero status before outputting
the blank line after the helper status printed by send-pack. No
error messages reach the user.
This caused users to see the following from git push over HTTP
when the remote side's update hook rejected the branch:
$ git push http://... master
Counting objects: 4, done.
Delta compression using up to 6 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 301 bytes, done.
Total 3 (delta 0), reused 0 (delta 0)
$
Always print a blank line after the send-pack process terminates,
ensuring the helper status report (if it was output) will be
correctly parsed by the calling transport-helper.c. This ensures
the helper doesn't abort before the status report can be shown to
the user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack)
introduced the --quiet option to receive-pack and made send-pack
pass that option. Older versions of receive-pack do not recognize
the option, however, and terminate immediately. The commit was
therefore reverted.
This change instead adds a 'quiet' capability to receive-pack,
which is a backwards compatible.
In addition, this fixes push --quiet via http: A verbosity of 0
means quiet for remote helpers.
Reported-by: Tobias Ulmer <tobiasu@tmux.org>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive-pack advertises its list of refs, it generally hides the
capabilities information after a NUL at the end of the first ref.
However, when we have an empty repository, there are no refs, and
therefore receive-pack writes a fake ref "capabilities^{}" with the
capabilities afterwards.
On the client side, git reads the result with get_remote_heads(). We pick
the capabilities from the end of the line, and then call check_ref() to
make sure the ref name is valid. We see that it isn't, and don't bother
adding it to our list of refs.
However, the call to check_ref() is enabled by passing the REF_NORMAL flag
to get_remote_heads. For the regular git transport, we pass REF_NORMAL in
get_refs_via_connect() if we are doing a push (since only receive-pack
uses this fake ref). But in remote-curl, we never use this flag, and we
accept the fake ref as a real one, passing it back from the helper to the
parent git-push.
Most of the time this bug goes unnoticed, as the fake ref won't match our
refspecs. However, if "--mirror" is used, then we see it as remote cruft
to be pruned, and try to pass along a deletion refspec for it. Of course
this refspec has bogus syntax (because of the ^{}), and the helper
complains, aborting the push.
Let's have remote-curl mirror what the builtin get_refs_via_connect() does
(at least for the case of using git protocol; we can leave the dumb
info/refs reader as it is).
This also fixes pushing with --mirror to a smart-http remote that uses
alternates. The fake ".have" refs the server gives to avoid unnecessary
network transfer has a similar bad interactions with the machinery.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before commit 986bbc08, git was proactive about asking for
http passwords. It assumed that if you had a username in
your URL, you would also want a password, and asked for it
before making any http requests.
However, this could interfere with the use of .netrc (see
986bbc08 for details). And it was also unnecessary, since
the http fetching code had learned to recognize an HTTP 401
and prompt the user then. Furthermore, the proactive prompt
could interfere with the usage of .netrc (see 986bbc08 for
details).
Unfortunately, the http push-over-DAV code never learned to
recognize HTTP 401, and so was broken by this change. This
patch does a quick fix of re-enabling the "proactive auth"
strategy only for http-push, leaving the dumb http fetch and
smart-http as-is.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_remote_heads function reads the list of remote refs
during git protocol session. It dates all the way back to
def88e9 (Commit first cut at "git-fetch-pack", 2005-07-04).
At that time, the idea was to come up with a list of refs we
were interested in, and then filter the list as we got it
from the remote side.
Later, 1baaae5 (Make maximal use of the remote refs,
2005-10-28) stopped filtering at the get_remote_heads layer,
letting us use the non-matching refs to find common history.
As a result, all callers now simply pass an empty match
list (and any future callers will want to do the same). So
let's drop these now-useless parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/http-auth:
http_init: accept separate URL parameter
http: use hostname in credential description
http: retry authentication failures for all http requests
remote-curl: don't retry auth failures with dumb protocol
improve httpd auth tests
url: decode buffers that are not NUL-terminated
The http_init function takes a "struct remote". Part of its
initialization procedure is to look at the remote's url and
grab some auth-related parameters. However, using the url
included in the remote is:
- wrong; the remote-curl helper may have a separate,
unrelated URL (e.g., from remote.*.pushurl). Looking at
the remote's configured url is incorrect.
- incomplete; http-fetch doesn't have a remote, so passes
NULL. So http_init never gets to see the URL we are
actually going to use.
- cumbersome; http-push has a similar problem to
http-fetch, but actually builds a fake remote just to
pass in the URL.
Instead, let's just add a separate URL parameter to
http_init, and all three callsites can pass in the
appropriate information.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the HTTP connection is broken in the middle of a fetch or clone
body, the client presented a useless error message due to part of
the upload-pack->remote-curl pkt-line protocol leaking out of the
helper as the helper's "fetch result":
error: RPC failed; result=18, HTTP code = 200
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: unpack-objects failed
warning: https unexpectedly said: '0000'
Instead when the HTTP RPC fails discard all remaining data from
upload-pack and report nothing to the transport helper. Errors
were already sent to stderr.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit ffa69e61d3, reversing
changes made to 4a13c4d148.
Adding a new command line option to receive-pack and feed it from
send-pack is not an acceptable way to add features, as there is no
guarantee that your updated send-pack will be talking to updated
receive-pack. New features need to be added via the capability mechanism
negotiated over the protocol.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-quiet-push:
receive-pack: do not overstep command line argument array
propagate --quiet to send-pack/receive-pack
Conflicts:
Documentation/git-receive-pack.txt
Documentation/git-send-pack.txt
* cb/maint-quiet-push:
receive-pack: do not overstep command line argument array
propagate --quiet to send-pack/receive-pack
Conflicts:
Documentation/git-receive-pack.txt
Documentation/git-send-pack.txt
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
* sr/transport-helper-fix: (21 commits)
transport-helper: die early on encountering deleted refs
transport-helper: implement marks location as capability
transport-helper: Use capname for refspec capability too
transport-helper: change import semantics
transport-helper: update ref status after push with export
transport-helper: use the new done feature where possible
transport-helper: check status code of finish_command
transport-helper: factor out push_update_refs_status
fast-export: support done feature
fast-import: introduce 'done' command
git-remote-testgit: fix error handling
git-remote-testgit: only push for non-local repositories
remote-curl: accept empty line as terminator
remote-helpers: export GIT_DIR variable to helpers
git_remote_helpers: push all refs during a non-local export
transport-helper: don't feed bogus refs to export push
git-remote-testgit: import non-HEAD refs
t5800: document some non-functional parts of remote helpers
t5800: use skip_all instead of prereq
t5800: factor out some ref tests
...
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
Add the --quiet option to send-pack/receive-pack and pass it to
unpack-objects in the receive-pack codepath and to receive-pack in
the push codepath.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
doc/fast-import: clarify notemodify command
Documentation: minor grammatical fix in rev-list-options.txt
Documentation: git-filter-branch honors replacement refs
remote-curl: Add a format check to parsing of info/refs
git-config: Remove extra whitespaces
When parsing info/refs, no checks were applied that the file was in
the requried format. Since the file is read from a remote webserver,
this isn't guarenteed to be true. Add a check that the file at least
only contains lines that consist of 40 characters followed by a tab
and then the ref name.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching an http URL, we first try fetching info/refs
with an extra "service" parameter. This will work for a
smart-http server, or a dumb server which ignores extra
parameters when fetching files. If that fails, we retry
without the extra parameter to remain compatible with dumb
servers which didn't like our first request.
If the server returned a "401 Unauthorized", indicating that
the credentials we provided were not good, there is not much
point in retrying. With the current code, we just waste an
extra round trip to the HTTP server before failing.
But as the http code becomes smarter about throwing away
rejected credentials and re-prompting the user for new ones
(which it will later in this series), this will become more
confusing. At some point we will stop asking for credentials
to retry smart http, and will be asking for credentials to
retry dumb http. So now we're not only wasting an extra HTTP
round trip for something that is unlikely to work, but we're
making the user re-type their password for it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This went unnoticed because the transport helper infrastructore did
not check the return value of the helper, nor did the helper print
anything before exiting.
While at it also make sure that the stream doesn't end unexpectedly.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
Conflicts:
sha1_file.c
The size of objects we read from the repository and data we try to put
into the repository are represented in "unsigned long", so that on larger
architectures we can handle objects that weigh more than 4GB.
But the interface defined in zlib.h to communicate with inflate/deflate
limits avail_in (how many bytes of input are we calling zlib with) and
avail_out (how many bytes of output from zlib are we ready to accept)
fields effectively to 4GB by defining their type to be uInt.
In many places in our code, we allocate a large buffer (e.g. mmap'ing a
large loose object file) and tell zlib its size by assigning the size to
avail_in field of the stream, but that will truncate the high octets of
the real size. The worst part of this story is that we often pass around
z_stream (the state object used by zlib) to keep track of the number of
used bytes in input/output buffer by inspecting these two fields, which
practically limits our callchain to the same 4GB limit.
Wrap z_stream in another structure git_zstream that can express avail_in
and avail_out in unsigned long. For now, just die() when the caller gives
a size that cannot be given to a single zlib call. In later patches in the
series, we would make git_inflate() and git_deflate() internally loop to
give callers an illusion that our "improved" version of zlib interface can
operate on a buffer larger than 4GB in one go.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap deflateInit, deflate, and deflateEnd for everybody, and the sole use
of deflateInit2 in remote-curl.c to tell the library to use gzip header
and trailer in git_deflate_init_gzip().
There is only one caller that cares about the status from deflateEnd().
Introduce git_deflate_end_gently() to let that sole caller retrieve the
status and act on it (i.e. die) for now, but we would probably want to
make inflate_end/deflate_end die when they ran out of memory and get
rid of the _gently() kind.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Yes, these don't match perfectly with the void* first parameter of the
fread/fwrite in the standard library, but they do match the curl
expected method signature. This is needed when a refactor passes a
curl_write_callback around, which would otherwise give incorrect
parameter warnings.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
libcurl may choose to try and use Expect: 100-continue for
any type of POST, not just a Transfer: chunked-encoding type.
Force it to disable this feature, as not all proxy servers support
100-continue and leaving it enabled can cause 1 second stalls during
the negotiation phase of fetch-pack/upload-pack.
In ("206b099d26 smart-http: Don't use Expect: 100-Continue") we
tried to disable this for only large POST bodies, but it should be
disabled for every POST body.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some HTTP/1.1 servers or proxies don't correctly implement the
100-Continue feature of HTTP/1.1. Its a difficult feature to
implement right, and isn't commonly used by browsers, so many
developers may not even be aware that their server (or proxy)
doesn't honor it.
Within the smart HTTP protocol for Git we only use this newer
"Expect: 100-Continue" feature to probe for missing authentication
before uploading a large payload like a pack file during push.
If authentication is necessary, we expect the server to send the
401 Not Authorized response before the bulk data transfer starts,
thus saving the client bandwidth during the retry.
A different method to probe for working authentication is to send an
empty command list (that is just "0000") to $URL/git-receive-pack.
or $URL/git-upload-pack. All versions of both receive-pack and
upload-pack since the introduction of smart HTTP in Git 1.6.6
cleanly accept just a flush-pkt under --stateless-rpc mode, and
exit with success.
If HTTP level authentication is successful, the backend will return
an empty response, but with HTTP status code 200. This enables
the client to continue with the transfer.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the remote HTTP server fails (e.g. returns 404 or 500) when we
posted the RPC to it, we won't have sent anything to the background
Git process that is supposed to handle the stream. Because we
didn't send anything, its waiting for input from remote-curl, and
remote-curl cannot read its response payload because doing so would
lead to a deadlock.
Send the background task EOF on its input before we try to read
its response back, that way it will break out of its read loop
and terminate.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rc/maint-curl-helper:
remote-curl: ensure that URLs have a trailing slash
http: make end_url_with_slash() public
t5541-http-push: add test for URLs with trailing slash
Conflicts:
remote-curl.c
Previously, we blindly assumed that URLs passed to the remote-curl
helper did not end with a trailing slash.
Use the convenience function end_url_with_slash() from http.[ch] to
ensure that URLs have a trailing slash on invocation of the remote-curl
helper, and use the URL as one with a trailing slash throughout.
It is possible for users to pass a URL with a trailing slash to
remote-curl, by, say, setting it in remote.<name>.url in their git
config. The resulting requests have an empty path component (//) and may
break implementations of the http git protocol.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an HTTP request returns a 401, Git will currently fail with a
confusing message saying that it got a 401, which is not very
descriptive.
Currently if a user wants to use Git over HTTP, they have to use one
URL with the username in the URL (e.g. "http://user@host.com/repo.git")
for write access and another without the username for unauthenticated
read access (unless they want to be prompted for the password each
time). However, since the HTTP servers will return a 401 if an action
requires authentication, we can prompt for username and password if we
see this, allowing us to use a single URL for both purposes.
This patch changes http_request to prompt for the username and password,
then return HTTP_REAUTH so http_get_strbuf can try again. If it gets
a 401 even when a user/pass is supplied, http_request will now return
HTTP_NOAUTH which remote_curl can then use to display a more
intelligent error message that is less confusing.
Signed-off-by: Scott Chacon <schacon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tc/http-cleanup:
remote-curl: init walker only when needed
remote-curl: use http_fetch_ref() instead of walker wrapper
http: init and cleanup separately from http-walker
http-walker: cleanup more thoroughly
http-push: remove "|| 1" to enable verbose check
t554[01]-http-push: refactor, add non-ff tests
t5541-http-push: check that ref is unchanged for non-ff test
* sp/maint-push-sideband:
receive-pack: Send internal errors over side-band #2
t5401: Use a bare repository for the remote peer
receive-pack: Send hook output over side band #2
receive-pack: Wrap status reports inside side-band-64k
receive-pack: Refactor how capabilities are shown to the client
send-pack: demultiplex a sideband stream with status data
run-command: support custom fd-set in async
run-command: Allow stderr to be a caller supplied pipe
Conflicts:
builtin-receive-pack.c
run-command.c
t/t5401-update-hooks.sh
Invoke get_http_walker() only when fetching with the dumb protocol.
Additionally, add an invocation to walker_free() after we're done using
the walker.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The http-walker implementation of walker->fetch_ref() doesn't do
anything special compared to http_fetch_ref() anyway.
Remove init_walker() invocation before fetching the ref, since we aren't
using the walker wrapper and don't need a walker instance anymore.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, all our http operations were done with http-walker. With the
new remote-curl helper, we find ourselves using http methods outside of
http-walker - for example, fetching info/refs.
Accomodate this by separating http_init() and http_cleanup() invocations
from http-walker.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/maint-push-sideband:
receive-pack: Send hook output over side band #2
receive-pack: Wrap status reports inside side-band-64k
receive-pack: Refactor how capabilities are shown to the client
send-pack: demultiplex a sideband stream with status data
run-command: support custom fd-set in async
run-command: Allow stderr to be a caller supplied pipe
Update git fsck --full short description to mention packs
Conflicts:
run-command.c
This patch adds the possibility to supply a set of non-0 file
descriptors for async process communication instead of the
default-created pipe.
Additionally, we now support bi-directional communiction with the
async procedure, by giving the async function both read and write
file descriptors.
To retain compatiblity and similar "API feel" with start_command,
we require start_async callers to set .out = -1 to get a readable
file descriptor. If either of .in or .out is 0, we supply no file
descriptor to the async process.
[sp: Note: Erik started this patch, and a huge bulk of it is
his work. All bugs were introduced later by Shawn.]
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "info/refs" is a static file and not behind a CGI handler, some
servers may not handle a GET request for it with a query string
appended (eg. "?foo=bar") properly.
If such a request fails, retry it sans the query string. In addition,
ensure that the "smart" http protocol is not used (a service has to be
specified with "?service=<service name>" to be conformant).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Reported-and-tested-by: Yaroslav Halchenko <debian@onerussian.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/symbol-static:
date.c: mark file-local function static
Replace parse_blob() with an explanatory comment
symlinks.c: remove unused functions
object.c: remove unused functions
strbuf.c: remove unused function
sha1_file.c: remove unused function
mailmap.c: remove unused function
utf8.c: mark file-local function static
submodule.c: mark file-local function static
quote.c: mark file-local function static
remote-curl.c: mark file-local function static
read-cache.c: mark file-local functions static
parse-options.c: mark file-local function static
entry.c: mark file-local function static
http.c: mark file-local functions static
pretty.c: mark file-local function static
builtin-rev-list.c: mark file-local function static
bisect.c: mark file-local function static
* maint:
remote-curl: Fix Accept header for smart HTTP connections
grep: -L should show empty files
rebase--interactive: Ignore comments and blank lines in peek_next_command
We actually expect to see an application/x-git-upload-pack-result
but we lied and said we Accept *-response. This was a typo on my
part when I was writing the code.
Fortunately the wrong Accept header had no real impact, as the
deployed git-http-backend servers were not testing the Accept
header before they returned their content.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using multi-pass authentication methods, the curl library may need
to rewind the read buffers used for providing data to HTTP POST, if data
has been output before a 401 error is received.
This is needed only when the first request (when the multi-pass
authentication method isn't initialized and hasn't received its challenge
yet) for a certain curl session is a chunked HTTP POST.
As long as the current rpc read buffer is the first one, we're able to
rewind without need for additional buffering.
The curl library currently starts sending data without waiting for a
response to the Expect: 100-continue header, due to a bug in curl that
exists up to curl version 7.19.7.
If the HTTP server doesn't handle Expect: 100-continue headers properly
(e.g. Lighttpd), the library has to start sending data without knowing
if the request will be successfully authenticated. In this case, this
rewinding solution is not sufficient - the whole request will be sent
before the 401 error is received.
Signed-off-by: Martin Storsjo <martin@martin.st>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the extraneous semicolon (';') at the end of the if statement
that allowed the code in its block to execute regardless of the
condition.
This fixes pushing to a smart http backend with chunked encoding.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This works around a bug in curl versions up to 7.19.4, where disabling the
CURLOPT_NOBODY option sets the internal state incorrectly considering that
CURLOPT_PUT was enabled earlier.
The bug is discussed at http://curl.haxx.se/bug/view.cgi?id=2727981 and is
corrected in the latest version of curl in CVS.
This bug usually has no impact on git, but may surface if using multi-pass
authentication methods.
Signed-off-by: Martin Storsjo <martin@martin.st>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/smart-http: (37 commits)
http-backend: Let gcc check the format of more printf-type functions.
http-backend: Fix access beyond end of string.
http-backend: Fix bad treatment of uintmax_t in Content-Length
t5551-http-fetch: Work around broken Accept header in libcurl
t5551-http-fetch: Work around some libcurl versions
http-backend: Protect GIT_PROJECT_ROOT from /../ requests
Git-aware CGI to provide dumb HTTP transport
http-backend: Test configuration options
http-backend: Use http.getanyfile to disable dumb HTTP serving
test smart http fetch and push
http tests: use /dumb/ URL prefix
set httpd port before sourcing lib-httpd
t5540-http-push: remove redundant fetches
Smart HTTP fetch: gzip requests
Smart fetch over HTTP: client side
Smart push over HTTP: client side
Discover refs via smart HTTP server when available
http-backend: more explict LocationMatch
http-backend: add example for gitweb on same URL
http-backend: use mod_alias instead of mod_rewrite
...
Conflicts:
.gitignore
remote-curl.c
The git-remote-curl backend detects if the remote server supports
the git-upload-pack service, and if so, runs git-fetch-pack locally
in a pipe to generate the want/have commands.
The advertisements from the server that were obtained during the
discovery are passed into git-fetch-pack before the POST request
starts, permitting server capability discovery and enablement.
Common objects that are discovered are appended onto the request as
have lines and are sent again on the next request. This allows the
remote side to reinitialize its in-memory list of common objects
during the next request.
Because all requests are relatively short, below git-remote-curl's
1 MiB buffer limit, requests will use the standard Content-Length
header and be valid HTTP/1.0 POST requests. This makes the fetch
client more tolerant of proxy servers which don't support HTTP/1.1
or the chunked transfer encoding.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-remote-curl backend detects if the remote server supports
the git-receive-pack service, and if so, runs git-send-pack in a
pipe to dump the command and pack data as a single POST request.
The advertisements from the server that were obtained during the
discovery are passed into git-send-pack before the POST request
starts. This permits git-send-pack to operate largely unmodified.
For smaller packs (those under 1 MiB) a HTTP/1.0 POST with a
Content-Length is used, permitting interaction with any server.
The 1 MiB limit is arbitrary, but is sufficent to fit most deltas
created by human authors against text sources with the occasional
small binary file (e.g. few KiB icon image). The configuration
option http.postBuffer can be used to increase (or shink) this
buffer if the default is not sufficient.
For larger packs which cannot be spooled entirely into the helper's
memory space (due to http.postBuffer being too small), the POST
request requires HTTP/1.1 and sets "Transfer-Encoding: chunked".
This permits the client to upload an unknown amount of data in one
HTTP transaction without needing to pregenerate the entire pack
file locally.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The upload-pack requests are mostly plain text and they compress
rather well. Deflating them with Content-Encoding: gzip can easily
drop the size of the request by 50%, reducing the amount of data
to transfer as we negotiate the common commits.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of loading the cached info/refs, try to use the smart HTTP
version when the server supports it. Since the smart variant is
actually the pkt-line stream from the start of either upload-pack
or receive-pack we need to parse these through get_remote_heads,
which requires a background thread to feed its pipe.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's okay to use the curl helper without a local repository, so long
as you don't use "fetch". There aren't any git programs that would try
to use it, and it doesn't make sense to try it (since there's nowhere
to write the results), but we may as well be clear.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remote helper interface now supports the push capability,
which can be used to ask the implementation to push one or more
specs to the remote repository. For remote-curl we implement this
by calling the existing WebDAV based git-http-push executable.
Internally the helper interface uses the push_refs transport hook
so that the complexity of the refspec parsing and matching can be
reused between remote implementations. When possible however the
helper protocol uses source ref name rather than the source SHA-1,
thereby allowing the helper to access this name if it is useful.
>From Clemens Buchacher <drizzd@aon.at>:
update http tests according to remote-curl capabilities
o Pushing packed refs is now fixed.
o The transport helper fails if refs are already up-to-date. Add
a test for that.
o The transport helper will notice if refs are already
up-to-date. We therefore need to update server info in the
unpacked-refs test.
o The transport helper will purge deleted branches automatically.
o Use a variable ($ORIG_HEAD) instead of full SHA-1 name.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
CC: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some transports, like the native pack transport implemented by
fetch-pack, support useful features like depth or include tags.
These should be exposed if the underlying helper knows how to
use them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some network protocols (e.g. native git://) are able to fetch more
than one ref at a time and reduce the overall transfer cost by
combining the requests into a single exchange. Instead of feeding
each fetch request one at a time to the helper, feed all of them
at once so the helper can decide whether or not it should batch them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will need the walker, url and remote in other functions as the
code grows larger to support smart HTTP. Extract this out into a
set of globals we can easily reference once configured.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use -b <branch>, we may checkout something else than what the
remote's HEAD references, but we still used remote_head to supply the
new ref value to the post-checkout hook, which is wrong.
So instead of using remote_head to find the value to be passed to the
post-checkout hook, we have to use our_head_points_at, which is always
correctly setup, even if -b is not used.
This also fixes a segfault when "clone -b <branch>" is used with a
remote repo that doesn't have a valid HEAD, as in such a case
remote_head is NULL, but we still tried to access it.
Reported-by: Devin Cofer <ranguvar@archlinux.us>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All programs, in particular also the stand-alone programs (non-builtins)
must call git_extract_argv0_path(argv[0]) in order to help builds that
derive the installation prefix at runtime, such as the MinGW build.
Without this call, the program segfaults (or raises an assertion
failure).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Tested-by: Michael Wookey <michaelwookey@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the transport native helper mechanism to fetch by http (and ftp, etc).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
