The cases "git push" fails due to non-ff can be broken into three
categories; each case is given a separate advise message.
By Christopher Tiwald (2) and Jeff King (1)
* ct/advise-push-default:
Fix httpd tests that broke when non-ff push advice changed
clean up struct ref's nonfastforward field
push: Provide situational hints for non-fast-forward errors
"git repack" used to write out unreachable objects as loose objects
when repacking, even if such loose objects will immediately pruned
due to its age.
By Jeff King
* jk/repack-no-explode-objects-from-old-pack:
gc: use argv-array for sub-commands
argv-array: add a new "pushl" method
argv-array: refactor empty_argv initialization
gc: do not explode objects which will be immediately pruned
Unlike "git rev-parse --show-cdup", "--show-prefix" did not give an
empty line when run at the top of the working tree.
By Ross Lagerwall
* rl/show-empty-prefix:
rev-parse --show-prefix: add in trailing newline
This option was not yet described in the gitmodules documentation. We
only described it in the 'git submodule' command documentation but
gitmodules is the more natural place to look.
A short reference in the 'git submodule' documentation should be
sufficient since the details can now be found in the documentation to
gitmodules.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" over smart-http lost progress output a few releases ago.
By Jeff King
* jk/maint-push-progress:
t5541: test more combinations of --progress
teach send-pack about --[no-]progress
send-pack: show progress when isatty(2)
A contrib script "rerere-train" did not work out of the box unless user
futzed with her $PATH.
* jc/rerere-train:
contrib/rerere-train: use installed git-sh-setup
"log --graph" was not very friendly with "--stat" option and its output
had line breaks at wrong places.
By Lucian Poston (5) and Zbigniew Jędrzejewski-Szmek (3)
* lp/diffstat-with-graph:
t4052: work around shells unable to set COLUMNS to 1
test-lib: skip test with COLUMNS=1 under mksh
Prevent graph_width of stat width from falling below min
t4052: Test diff-stat output with minimum columns
t4052: Adjust --graph --stat output for prefixes
Adjust stat width calculations to take --graph output into account
Add output_prefix_length to diff_options
t4052: test --stat output with --graph
Describe config file selection in git-config. While the usage message of
git-config shows --local, the documentation page did not contain anything
about that.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using a Perl script on a system where "perl" found on user's $PATH
could be ancient or otherwise broken, we allow builders to specify the
path to a good copy of Perl with $PERL_PATH. The gitweb test forgot to
use that Perl when running its test.
By Jeff King (1) and Zbigniew Jędrzejewski-Szmek (1)
* jk/maint-gitweb-test-use-sane-perl:
Consistently use perl from /usr/bin/ for scripts
t/gitweb-lib: use $PERL_PATH to run gitweb
"git config --rename-section" to rename an existing section into a bogus
one did not check the new name.
By Jeff King
* jk/maint-config-bogus-section:
config: reject bogus section names for --rename-section
In the older days, the header "Conflicts:" in "cherry-pick" and "merge"
was separated by a blank line from the list of paths that follow for
readability, but when "merge" was rewritten in C, we lost it by
mistake. Remove the newline from "cherry-pick" to make them match again.
By Ralf Thielow
* rt/cherry-revert-conflict-summary:
sequencer: remove additional blank line
The filesystem boundary was not correctly reported when .git directory
discovery stopped at a mount point.
By Clemens Buchacher
* cb/maint-report-mount-point-correctly-in-setup:
properly keep track of current working directory
Attach example sections to previous level of indenting.
Fix a trailing ::
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Octopus merge strategy did not reduce heads that are recorded in the final
commit correctly.
By Junio C Hamano (4) and Michał Kiedrowicz (1)
* jc/merge-reduce-parents-early:
fmt-merge-msg: discard needless merge parents
builtin/merge.c: reduce parents early
builtin/merge.c: collect other parents early
builtin/merge.c: remove "remoteheads" global variable
merge tests: octopus with redundant parents
The command line parser choked "git cherry-pick $name" when $name can be
both revision name and a pathname, even though $name can never be a path
in the context of the command.
By Clemens Buchacher
* cb/cherry-pick-rev-path-confusion:
cherry-pick: do not expect file arguments
HTTP transport that requires authentication did not work correctly when
multiple connections are used simultaneously.
By Jeff King (3) and Clemens Buchacher (1)
* cb/http-multi-curl-auth:
http: use newer curl options for setting credentials
http: clean up leak in init_curl_http_auth
fix http auth with multiple curl handles
http auth fails with multiple curl handles
The report from "git fetch" said "new branch" even for a non branch ref.
By Marc Branchaud
* mb/fetch-call-a-non-branch-a-ref:
fetch: describe new refs based on where it came from
fetch: Give remote_ref to update_local_ref() as well
i18n marking for an error message for "git stash --notavalidoption"
was incorrect.
By Ross Lagerwall
* rl/maint-stash-i18n-save-error:
stash: use eval_gettextln correctly
"diff --no-index" codepath had a few places that used fixed-size
buffer and truncated paths that are too long.
By Jim Meyering (1) and Junio C Hamano (1)
* jm/maint-strncpy-diff-no-index:
diff --no-index: use strbuf for temporary pathnames
diff: avoid stack-buffer-read-overrun for very long name
The parser in "fast-import" did not diagnose ":9" style references that is
not followed by required SP/LF as an error.
By Pete Wyckoff
* pw/fast-import-dataref-parsing:
fast-import: tighten parsing of datarefs
When "git fetch" encounters repositories with too many references, the
command line of "fetch-pack" that is run by a helper e.g. remote-curl, may
fail to hold all of them. Now such an internal invocation can feed the
references through the standard input of "fetch-pack".
By Ivan Todoroski
* it/fetch-pack-many-refs:
remote-curl: main test case for the OS command line overflow
fetch-pack: test cases for the new --stdin option
remote-curl: send the refs to fetch-pack on stdin
fetch-pack: new --stdin option to read refs from stdin
Conflicts:
t/t5500-fetch-pack.sh
"git fetch" that recurses into submodules on demand did not check if it
needs to go into submodules when non branches (most notably, tags) are
fetched.
By Jens Lehmann
* jl/maint-submodule-recurse-fetch:
submodules: recursive fetch also checks new tags for submodule commits
"git blame" started missing quite a few changes from the origin since we
stopped using the diff minimalization by default in v1.7.2 era.
Teach "--minimal" option to "git blame" to work around this regression.
* jc/maint-blame-minimal:
blame: accept --need-minimal
"log -p --graph" used with "--stat" had a few formatting error.
By Lucian Poston
* lp/maint-diff-three-dash-with-graph:
t4202: add test for "log --graph --stat -p" separator lines
log --graph: fix break in graph lines
log --graph --stat: three-dash separator should come after graph lines
Giving "--continue" to a conflicted "rebase -i" session skipped a
commit that only results in changes to submodules.
By John Keeping
* jk/rebase-i-submodule-conflict-only:
rebase -i continue: don't skip commits that only change submodules
By Byrial Jensen (2) and others
via Jiang Xin (1) and Ralf Thielow (1)
* 'maint' of https://github.com/git-l10n/git-po:
l10n: Initial German translation
l10n: Update Simplified Chinese translation
l10n: Update git.pot (2 new messages)
l10n: Add the German translation team and initialize de.po
l10n: Add Danish team (da) to list of teams
l10n: New da.po file with 0 translations
l10n: Updated pt_PT language
While the majority of scripts use '#!/usr/bin/perl', some use
'#!/usr/bin/env perl'. In the end there is no difference, because the
Makefile rewrites "#!.*perl" with "#!$PERL_PATH" in scripted
Porcelains before installing. Nevertheless, the second form can be
misleading, because it suggests that perl found first in $PATH will be
used.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code runs "perl gitweb.cgi" to test gitweb. This
will use whatever version of perl happens to be first in the
PATH. We are better off using the specific perl that the
user specified via PERL_PATH, which matches what gets put on
the #!-line of the built gitweb.cgi.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we tested only that "push --quiet --no-progress"
was silent. However, there are many other combinations that
were not tested:
1. no options at all (but stderr as a tty)
2. --no-progress by itself
3. --quiet by itself
4. --progress (when stderr not a tty)
These are tested elsewhere for general "push", but it is
important to test them separately for http. It follows a
very different code path than git://, and options must be
relayed across a remote helper to a separate send-pack
process (and in fact cases (1), (2), and (4) have all been
broken just for http at some point in the past).
We can drop the "--quiet --no-progress" test, as it is not
really interesting (it is already handled by testing them
separately in (2) and (3) above).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The send_pack function gets a "progress" flag saying "yes,
definitely show progress" or "no, definitely do not show
progress". This gets set properly by transport_push when
send_pack is called directly.
However, when the send-pack command is executed separately
(as it is for the remote-curl helper), there is no way to
tell it "definitely do this". As a result, we do not
properly respect "git push --no-progress" for smart-http
remotes; you will still get progress if stderr is a tty.
This patch teaches send-pack --progress and --no-progress,
and teaches remote-curl to pass the appropriate option to
override send-pack's isatty check. This fixes the
--no-progress case above, and as a bonus, also makes "git
push --progress" work when stderr is not a tty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The send_pack_args struct has two verbosity flags: "quiet"
and "progress". Originally, if "quiet" was set, we would
tell pack-objects explicitly to be quiet, and if "progress"
was set, we would tell it to show progress. Otherwise, we
told it neither, and it relied on isatty(2) to make the
decision itself.
However, commit 01fdc21 changed the meaning of these
variables. Now both "quiet" and "!progress" instruct us to
tell pack-objects to be quiet (and a non-zero "progress"
means the same as before). This works well for transports
which call send_pack directly, as the transport code copies
transport->progress into send_pack_args->progress, and they
both have the same meaning.
However, the code path of calling "git send-pack" was left
behind. It always sets "progress" to 0, and thus always
tells pack-objects to be quiet. We can work around this by
checking isatty(2) ourselves in the cmd_send_pack code path,
restoring the original behavior of the send-pack command.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
