We did not check a valid certificate's subject at all, and would
have happily talked with a wrong host after connecting to an
incorrect address and getting a valid certificate that does not
belong to the host we intended to talk to.
Signed-off-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of adding an early return to the inside of the
ssl_socket_connect() function for NO_OPENSSL compilation, split it
into a separate stub function.
No functional change, but the next change to extend ssl_socket_connect()
will become easier to read this way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The imap-send code was adapted from another project, and
still contains many unused bits of code. One of these bits
contains a type "struct string_list" which bears no
resemblence to the "struct string_list" we use elsewhere in
git. This causes the compiler to complain if git's
string_list ever becomes part of cache.h.
Let's just drop the dead code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a pack using objects that reside in existing packs, we try
to avoid recomputing futile delta between an object (trg) and a candidate
for its base object (src) if they are stored in the same packfile, and trg
is not recorded as a delta already. This heuristics makes sense because it
is likely that we tried to express trg as a delta based on src but it did
not produce a good delta when we created the existing pack.
As the pack heuristics prefer producing delta to remove data, and Linus's
law dictates that the size of a file grows over time, we tend to record
the newest version of the file as inflated, and older ones as delta
against it.
When creating a thin-pack to transfer recent history, it is likely that we
will try to send an object that is recorded in full, as it is newer. But
the heuristics to avoid recomputing futile delta effectively forbids us
from attempting to express such an object as a delta based on another
object. Sending an object in full is often more expensive than sending a
suboptimal delta based on other objects, and it is even more so if we
could use an object we know the receiving end already has (i.e. preferred
base object) as the delta base.
Tweak the recomputation avoidance logic, so that we do not punt on
computing delta against a preferred base object.
The effect of this change can be seen on two simulated upload-pack
workloads. The first is based on 44 reflog entries from my git.git
origin/master reflog, and represents the packs that kernel.org sent me git
updates for the past month or two. The second workload represents much
larger fetches, going from git's v1.0.0 tag to v1.1.0, then v1.1.0 to
v1.2.0, and so on.
The table below shows the average generated pack size and the average CPU
time consumed for each dataset, both before and after the patch:
dataset
| reflog | tags
---------------------------------
before | 53358 | 2750977
size after | 32398 | 2668479
change | -39% | -3%
---------------------------------
before | 0.18 | 1.12
CPU after | 0.18 | 1.15
change | +0% | +3%
This patch makes a much bigger difference for packs with a shorter slice
of history (since its effect is seen at the boundaries of the pack) though
it has some benefit even for larger packs.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function frees the individual "struct match_attr"s we
have allocated, but forgot to free the array holding their
pointers, leading to a minor memory leak (but it can add up
after checking attributes for paths in many directories).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add commit message to avoid commit's aborting due to the lack of
commit message, not because there are INTENT_TO_ADD entries in index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of rerere.enabled left the user in the dark as to who
might create an rr-cache directory. Add a note that simply invoking
rerere does this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thas would de-dent the body of a function that has grown rather large over
time, making it a bit easier to read.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In prepare_attr_stack, we pop the old elements of the stack
(which were left from a previous lookup and may or may not
be useful to us). Our loop to do so checks that we never
reach the top of the stack. However, the code immediately
afterwards will segfault if we did actually reach the top of
the stack.
Fortunately, this is not an actual bug, since we will never
pop all of the stack elements (we will always keep the root
gitattributes, as well as the builtin ones). So the extra
check in the loop condition simply clutters the code and
makes the intent less clear. Let's get rid of it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we prepare the attribute stack for a lookup on a path,
we start with the cached stack from the previous lookup
(because it is common to do several lookups in the same
directory hierarchy). So the first thing we must do in
preparing the stack is to pop any entries that point to
directories we are no longer interested in.
For example, if our stack contains gitattributes for:
foo/bar/baz
foo/bar
foo
but we want to do a lookup in "foo/bar/bleep", then we want
to pop the top element, but retain the others.
To do this we walk down the stack from the top, popping
elements that do not match our lookup directory. However,
the test do this simply checked strncmp, meaning we would
mistake "foo/bar/baz" as a leading directory of
"foo/bar/baz_plus". We must also check that the character
after our match is '/', meaning we matched the whole path
component.
There are two special cases to consider:
1. The top of our attr stack has the empty path. So we
must not check for '/', but rather special-case the
empty path, which always matches.
2. Typically when matching paths in this way, you would
also need to check for a full string match (i.e., the
character after is '\0'). We don't need to do so in
this case, though, because our path string is actually
just the directory component of the path to a file
(i.e., we know that it terminates with "/", because the
filename comes after that).
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The wording seems to suggest that creating the directory is needed and the
setting of rerere.enabled is only for disabling the feature by setting it
to 'false'. But the configuration is meant to be the primary control and
setting it to 'true' will enable it; the rr-cache directory will be
created as necessary and the user does not have to create it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 34110cd4 (Make 'unpack_trees()' have a separate source and
destination index) it is no longer true that a subdirectory with
the same prefix must not exist.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ExtUtils::MakeMaker generates MYMETA.json in addition to MYMETA.yml
since version 6.57_07. As it suggests, it is just meta information about
the build and is cleaned up with 'make clean', so it should be ignored.
Signed-off-by: Jack Nagel <jacknagel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When showing the raw timestamp, we format the numeric
seconds-since-epoch into a buffer, followed by the timezone
string. This string has come straight from the commit
object. A well-formed object should have a timezone string
of only a few bytes, but we could be operating on data
pushed by a malicious user.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fetch from a remote, we print a status table like:
From url
* [new branch] foo -> origin/foo
We create this table in a static buffer using sprintf. If
the remote refnames are long, they can overflow this buffer
and smash the stack.
Instead, let's use a strbuf to build the string.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment on top of stripspace() claims that the buffer
will no longer be NUL-terminated. However, this has not been
the case at least since the move to using strbuf in 2007.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This file is auto-generated by newer versions of ExtUtils::MakeMaker
(presumably starting with the version shipping with Perl 5.14). It just
contains extra information about the environment and arguments to the
Makefile-building process, and should be ignored.
Signed-off-by: Sebastian Morr <sebastian@morr.cc>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is to avoid reaching free of uninitialized members.
With an invalid .mailmap (and perhaps in other cases), it can reach
free(mi->name) with garbage for example.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This even dates back to the very beginning of "git name-rev";
it does not make much sense to dump all objects in the repository
and label non-commits as "undefined".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mz/remote-rename:
remote: only update remote-tracking branch if updating refspec
remote rename: warn when refspec was not updated
remote: "rename o foo" should not rename ref "origin/bar"
remote: write correct fetch spec when renaming remote 'remote'
* mg/maint-doc-sparse-checkout:
git-read-tree.txt: correct sparse-checkout and skip-worktree description
git-read-tree.txt: language and typography fixes
unpack-trees: print "Aborting" to stderr
* maint-1.7.5:
make the sample pre-commit hook script reject names with newlines, too
Reindent closing bracket using tab instead of spaces
Documentation/git-update-index: refer to 'ls-files'
* maint-1.7.4:
make the sample pre-commit hook script reject names with newlines, too
Reindent closing bracket using tab instead of spaces
Documentation/git-update-index: refer to 'ls-files'
* maint-1.7.3:
make the sample pre-commit hook script reject names with newlines, too
Reindent closing bracket using tab instead of spaces
Documentation/git-update-index: refer to 'ls-files'
The sample pre-commit hook script would fail to reject a file name like
"a\nb" because of the way newlines are handled in "$(...)". Adjust the
test to count filtered bytes and require there be 0. Also print all
diagnostics to standard error, not stdout, so they will actually be seen.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is unsafe to pass a temporary buffer as an argument to
read_directory().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fixLinks() function adds 'js=1' to each link that does not already
have 'js' query parameter specified. This is used to signal to gitweb
that the browser can actually do javascript when these links are used.
There are two problems with the existing code:
1. URIs with fragment and 'js' query parameter, like e.g.
...foo?js=0#l199
were not recognized as having 'js' query parameter already.
2. The 'js' query parameter, in the form of either '?js=1' or ';js=1'
was appended at the end of URI, even if it included a fragment
(had a hash part). This lead to the incorrect links like this
...foo#l199?js=1
instead of adding query parameter as last part of query, but
before the fragment part, i.e.
...foo?js=1#l199
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The negation example uses '*' to match everything. This used to work
before 9037026 (unpack-trees: fix sparse checkout's "unable to match
directories") because back then, the list of paths is used to match
sparse patterns, so with the patterns
*
!subdir/
subdir/ always matches any path that start with subdir/ and "*" has no
chance to get tested. The result is subdir is excluded.
After the said commit, a tree structure is dynamically created and
sparse pattern matching now follows closely how read_directory()
applies .gitignore. This solves one problem, but reveals another one.
With this new strategy, "!subdir/" rule will be only tested once when
"subdir" directory is examined. Entries inside subdir, when examined,
will match "*" and are (correctly) re-added again because any rules
without a slash will match at every directory level. In the end, "*"
can revert every negation rules.
In order to correctly exclude subdir, we must use
/*
!subdir
to limit "match all" rule at top level only.
"*" rule has no actual use in sparse checkout and can be confusing to
users. While we can automatically turn "*" to "/*", this violates
.gitignore definition. Instead, discourage "*" in favor of "/*" (in
the second example).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier code wanted to run merge_file and prompt_after_failed_merge
both of which wanted to read from the standard input of the entire
script inside a while loop, which read from a pipe, and in order to
do so, it redirected the original standard input to another file
descriptor. We no longer need to do so after the previous change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mergetool now treats its path arguments as a pathspec (like other git
subcommands), restricting action to the given files and directories.
Files matching the pathspec are filtered so mergetool only acts on
unmerged paths; previously it would assume each path argument was in an
unresolved state, and get confused when it couldn't check out their
other stages.
Running "git mergetool subdir" will prompt to resolve all conflicted
blobs under subdir.
Signed-off-by: Jonathon Mah <me@JonathonMah.com>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running git describe --dirty the index should be refreshed. Previously
the cached index would cause describe to think that the index was dirty when,
in reality, it was just stale.
The issue was exposed by python setuptools which hardlinks files into another
directory when building a distribution.
Signed-off-by: Junio C Hamano <gitster@pobox.com>