Since 507d7804c0 (pager: don't use unsafe functions in signal handlers,
2015-09-04), we have a separate code path in wait_or_whine() for the
case that we're in a signal handler. But that code path misses some of
the cases handled by the main logic.
This was improved in be8fc53e36 (pager: properly log pager exit code
when signalled, 2021-02-02), but that covered only case: actually
returning the correct error code. But there are some other cases:
- if waitpid() returns failure, we wouldn't notice and would look at
uninitialized garbage in the status variable; it's not clear if it's
possible to trigger this or not
- if the process exited by signal, then we would still report "-1"
rather than the correct signal code
This latter case even had a test added in be8fc53e36, but it doesn't
work reliably. It sets the pager command to:
>pager-used; test-tool sigchain
The latter command will die by signal, but because there are multiple
commands, there will be a shell in between. And it's the shell whose
waitpid() call will see the signal death, and it will then exit with
code 143, which is what Git will see.
To make matters even more confusing, some shells (such as bash) will
realize that there's nothing for the shell to do after test-tool
finishes, and will turn it into an exec. So the test was only checking
what it thought when /bin/sh points to a shell like bash (we're relying
on the shell used internally by Git to spawn sub-commands here, so even
running the test under bash would not be enough).
This patch adjusts the tests to explicitly call "exec" in the pager
command, which produces a consistent outcome regardless of shell. Note
that without the code change in this patch it _should_ fail reliably,
but doesn't. That test, like its siblings, tries to trigger SIGPIPE in
the git-log process writing to the pager, but only do so racily. That
will be fixed in a follow-on patch.
For the code change here, we have two options:
- we can teach the in_signal code to handle WIFSIGNALED()
- we can stop returning early when in_signal is set, and instead
annotate individual calls that we need to skip in this case
The former is a simpler patch, but means we're essentially duplicating
all of the logic. So instead I went with the latter. The result is a
bigger patch, and we do run the risk of new code being added but
forgetting to handle in_signal. But in the long run it seems more
maintainable.
I've skipped any non-trivial calls for the in_signal case, like calling
error(). We'll also skip the call to clear_child_for_cleanup(), as we
were before. This is arguably the wrong thing to do, since we wouldn't
want to try to clean it up again. But:
- we can't call it as-is, because it calls free(), which we must avoid
in a signal handler (we'd have to pass in_signal so it can skip the
free() call)
- we'll only go through the list of children to clean once, since our
cleanup_children_on_signal() handler pops itself after running (and
then re-raises, so eventually we'd just exit). So this cleanup only
matters if a process is on the cleanup list _and_ it has a separate
handler to clean itself up. Which is questionable in the first place
(and AFAIK we do not do).
- double-cleanup isn't actually that bad anyway. waitpid() will just
return an error, which we won't even report because of in_signal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit f6526728f9.
The change in f652672 (dir: select directories correctly, 2021-09-24)
caused a regression in directory-based matches with non-cone-mode
patterns, especially for .gitignore patterns. A test is included to
prevent this regression in the future.
The commit ed495847 (dir: fix pattern matching on dirs, 2021-09-24) was
reverted in 5ceb663 (dir: fix directory-matching bug, 2021-11-02) for
similar reasons. Neither commit changed tests, and tests added later in
the series continue to pass when these commits are reverted.
Reported-by: Danial Alihosseini <danial.alihosseini@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is only one caller, builtin/checkout.c, and it hardcodes
force_create=1.
This argument was introduced in abd0cd3a30 (refs: new public ref function:
safe_create_reflog, 2015-07-21), which promised to immediately use it in a
follow-on commit, but that never happened.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull" with any strategy when the other side is behind us
should succeed as it is a no-op, but doesn't.
* ev/pull-already-up-to-date-is-noop:
pull: should be noop when already-up-to-date
"git grep" looking in a blob that has non-UTF8 payload was
completely broken when linked with certain versions of PCREv2
library in the latest release.
* hm/paint-hits-in-log-grep:
Revert "grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data"
In certain environments or for specific test scenarios we might expect a
specific prerequisite check to succeed. Therefore we would like to abort
running our tests if this is not the case.
To remedy this we add the environment variable GIT_TEST_REQUIRE_PREREQ
which can be set to a space separated list of prereqs. If one of these
prereq tests fail then the whole test run will abort.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running the full test suite many tests can be skipped because of
missing prerequisites. It not easy right now to get an overview of which
ones are missing.
When switching to a new machine or environment some libraries and tools
might be missing or maybe a dependency broke completely. In this case
the tests would indicate nothing since all dependant tests are simply
skipped. This could hide broken behaviour or missing features in the
build. Therefore this patch summarizes the missing prereqs at the end of
the test run making it easier to spot such cases.
- Add failed prereqs to the test results.
- Aggregate and then show them with the totals.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, running 'git submodule deinit' on repos where the
submodule's '.git' is a directory, aborts with a message that is not
exactly user friendly.
Let's change this to instead warn the user that the .git/ directory
has been absorbed into the superproject.
The rest of the deinit function can operate as it already does with
new-style submodules.
In one test, we used to require "git submodule deinit" to fail even
with the "--force" option when the submodule's .git/ directory is not
absorbed. Adjust it to expect the operation to pass.
Suggested-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Mugdha Pattnaik <mugdhapattnaik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit ae39ba431a, as it
breaks "grep" when looking for a string in non UTF-8 haystack, when
linked with certain versions of PCREv2 library.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test `amending already signed commit` is using git checkout to
select a specific commit to amend. In case an earlier test fails and
leaves behind a dirty index/worktree this test would fail as well.
Using `checkout -f` will avoid interference by most other tests.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user.signingKey config for ssh signing supports either a path to a
file containing the key or for the sake of convenience a literal string
with the ssh public key. To differentiate between those two cases we
check if the first few characters contain "ssh-" which is unlikely to be
the start of a path. ssh supports other key types which are not prefixed
with "ssh-" and will currently be treated as a file path and therefore
fail to load. To remedy this we move the prefix check into its own
function and introduce the prefix `key::` for literal ssh keys. This way
we don't need to add new key types when they become available. The
existing `ssh-` prefix is retained for compatibility with current user
configs but removed from the official documentation to discourage its
use.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push remote-name" (that is, with no refspec given on the command
line) should push the refspecs in remote.remote-name.push. There is no
test case that checks this behavior in detached HEAD, so add one.
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The already-up-to-date pull bug was fixed for --ff-only but it did not
include the case where --ff or --ff-only are not specified. This updates
the --ff-only fix to include the case where --ff or --ff-only are not
specified in command line flags or config.
Signed-off-by: Erwin Villejo <erwin.villejo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t5319 corrupts the checksum of the midx file by
writing a single 0xff over the final byte, and then confirms that we
detect the problem. This usually works fine, but would break if the
actual checksum ended with that same byte already.
It seems like this should happen in 1 out of 256 test runs, but it turns
out to be less often in practice. The contents of the midx are mostly
deterministic because it's based on the objects, and we remove most
sources of randomness by setting GIT_COMMITTER_DATE, etc. However,
there's still some randomness: some objects are duplicated between
packs, and the midx must decide which to use, which can be based on
timing.
So very occasionally we can end up with a real 0xff byte, and the test
fails. The most robust fix would be to read out the final byte and then
change it to something else (e.g., adding 1 mod 256). But that's awkward
to do in shell. Let's just blindly corrupt 10 bytes instead of 1, which
reduces our chances of an accidental noop to 1 in 2^80.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "checkout" command is one of the main sources of leaks in the test
suite, let's fix the common ones by not leaking from the "struct
branch_info".
Doing this is rather straightforward, albeit verbose, we need to
xstrdup() constant strings going into the struct, and free() the ones
we clobber as we go along.
This also means that we can delete previous partial leak fixes in this
area, i.e. the "path_to_free" accounting added by 96ec7b1e70 (Convert
resolve_ref+xstrdup to new resolve_refdup function, 2011-12-13).
There was some discussion about whether "we should retain the "const
char *" here and cast at free() time, or have it be a "char *". Since
this is not a public API with any sort of API boundary let's use
"char *", as is already being done for the "refname" member of the
same struct.
The tests to mark as passing were found with:
rm .prove; GIT_SKIP_TESTS=t0027 prove -j8 --state=save t[0-9]*.sh :: --immediate
# apply & compile this change
prove -j8 --state=failed :: --immediate
I.e. the ones that were newly passing when the --state=failed command
was run. I left out "t3040-subprojects-basic.sh" and
"t4131-apply-fake-ancestor.sh" to to optimization-level related
differences similar to the ones noted in[1], except that these would
be something the current 'linux-leaks' job would run into.
1. https://lore.kernel.org/git/cover-v3-0.6-00000000000-20211022T175227Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regression fix.
* ab/fsck-unexpected-type:
object-file: free(*contents) only in read_loose_object() caller
object-file: fix SEGV on free() regression in v2.34.0-rc2
This reverts commit f45022dc2f,
as this is like breakage in the traversal more likely. In a
history with 10 single strand of pearls,
1-->2-->3--...->7-->8-->9-->10
asking "rev-list --unsorted-input 1 10 --not 9 8 7 6 5 4" fails to
paint the bottom 1 uninteresting as the traversal stops, without
completing the propagation of uninteresting bit starting at 4 down
through 3 and 2 to 1.
Fix a regression introduced in my 96e41f58fe (fsck: report invalid
object type-path combinations, 2021-10-01). When fsck-ing blobs larger
than core.bigFileThreshold, we'd free() a pointer to uninitialized
memory.
This issue would have been caught by SANITIZE=address, but since it
involves core.bigFileThreshold, none of the existing tests in our test
suite covered it.
Running them with the "big_file_threshold" in "environment.c" changed
to say "6" would have shown this failure, but let's add a dedicated
test for this scenario based on Han Xin's report[1].
The bug was introduced between v9 and v10[2] of the fsck series merged
in 061a21d36d (Merge branch 'ab/fsck-unexpected-type', 2021-10-25).
1. https://lore.kernel.org/git/20211111030302.75694-1-hanxin.hx@alibaba-inc.com/
2. https://lore.kernel.org/git/cover-v10-00.17-00000000000-20211001T091051Z-avarab@gmail.com/
Reported-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some setups, packfile uris act as bearer token. It is not
recommended to expose them plainly in logs, although in special
circunstances (e.g. debug) it makes sense to write them.
Redact the packfile URL paths by default, unless the GIT_TRACE_REDACT
variable is set to false. This mimics the redacting of the Authorization
header in HTTP.
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull --ff-only" and "git pull --rebase --ff-only" should make
it a no-op to attempt pulling from a remote that is behind us, but
instead the command errored out by saying it was impossible to
fast-forward, which may technically be true, but not a useful thing
to diagnose as an error. This has been corrected.
* jc/fix-pull-ff-only-when-already-up-to-date:
pull: --ff-only should make it a noop when already-up-to-date
The "-Y find-principals" option of ssh-keygen seems to be broken in
Debian's openssh-client 1:8.7p1-1, whereas it works fine in 1:8.4p1-5.
This causes several failures for GPGSSH tests. We fulfill the
prerequisite because generating the keys works fine, but actually
verifying a signature causes results ranging from bogus results to
ssh-keygen segfaulting.
We can find the broken version during the prereq check by feeding it
empty input. This should result in it complaining to stderr, but in the
broken version it triggers the segfault, causing the GPGSSH tests to be
skipped.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix ssh-signing test to work on a platform where the default ACL is
overly loose to upset OpenSSH (reported on an installation of Cygwin).
* ad/ssh-signing-testfix:
t/lib-git.sh: fix ACL-related permissions failure
As well as checking that the relevant functionality is available, the
GPGSSH prerequisite check creates the SSH keys that are used by the test
functions it gates. If these keys are created in a directory that
has a default Access Control List, the key files can inherit those
permissions.
This can result in a scenario where the private keys are created
successfully, so the prerequisite check passes and the tests are run,
but the key files have permissions that are too permissive, meaning
OpenSSH will refuse to load them and the tests will fail.
To avoid this happening, before creating the keys, clear any default ACL
set on the directory that will contain them. This step allowed to fail;
if setfacl isn't present, that's a very likely indicator that the
filesystem in question simply doesn't support default ACLs.
Helped-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strftime() function has a non-standard "%s" extension, which prints
the number of seconds since the epoch. But the "struct tm" we get has
already been adjusted for a particular time zone; going back to an epoch
time requires knowing that zone offset. Since strftime() doesn't take
such an argument, round-tripping to a "struct tm" and back to the "%s"
format may produce the wrong value (off by tz_offset seconds).
Since we're already passing in the zone offset courtesy of c3fbf81a85
(strbuf: let strbuf_addftime handle %z and %Z itself, 2017-06-15), we
can use that same value to adjust our epoch seconds accordingly.
Note that the description above makes it sound like strftime()'s "%s" is
useless (and really, the issue is shared by mktime(), which is what
strftime() would use under the hood). But it gets the two cases for
which it's designed correct:
- the result of gmtime() will have a zero offset, so no adjustment is
necessary
- the result of localtime() will be offset by the local zone offset,
and mktime() and strftime() are defined to assume this offset when
converting back (there's actually some magic here; some
implementations record this in the "struct tm", but we can't
portably access or manipulate it. But they somehow "know" whether a
"struct tm" is from gmtime() or localtime()).
This latter point means that "format-local:%s" actually works correctly
already, because in that case we rely on the system routines due to
6eced3ec5e (date: use localtime() for "-local" time formats,
2017-06-15). Our problem comes when trying to show times in the author's
zone, as the system routines provide no mechanism for converting in
non-local zones. So in those cases we have a "struct tm" that came from
gmtime(), but has been manipulated according to our offset.
The tests cover the broken round-trip by formatting "%s" for a time in a
non-system timezone. We use the made-up "+1234" here, which has two
advantages. One, we know it won't ever be the real system zone (and so
we're actually testing a case that would break). And two, since it has a
minute component, we're testing the full decoding of the +HHMM zone into
a number of seconds. Likewise, we test the "-1234" variant to make sure
there aren't any sign mistakes.
There's one final test, which covers "format-local:%s". As noted, this
already passes, but it's important to check that we didn't regress this
case. In particular, the caller in show_date() is relying on localtime()
to have done the zone adjustment, independent of any tz_offset we
compute ourselves. These should match up, since our local_tzoffset() is
likewise built around localtime(). But it would be easy for a caller to
forget to pass in a correct tz_offset to strbuf_addftime(). Fortunately
show_date() does this correctly (it has to because of the existing
handling of %z), and the test continues to pass. So this one is just
future-proofing against a change in our assumptions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull --no-verify" did not affect the underlying "git merge".
* ar/fix-git-pull-no-verify:
pull: honor --no-verify and do not call the commit-msg hook
Introduce the logical variable GIT_DEFAULT_BRANCH which represents the
the default branch name that will be used by "git init".
Currently this variable is equivalent to
git config init.defaultbranch || 'master'
This however will break if at one point the default branch is changed as
indicated by `default_branch_name_advice` in `refs.c`.
By providing this command ahead of time users of git can make their
code forward-compatible.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The filter system allows for alterations to file contents when they're
moved between the database and the worktree. We already made sure that
it is possible for smudge filters to produce contents that are larger
than `unsigned long` can represent (which matters on systems where
`unsigned long` is narrower than `size_t`, most notably 64-bit Windows).
Now we make sure that clean filters can _consume_ contents that are
larger than that.
Note that this commit only allows clean filters' _input_ to be larger
than can be represented by `unsigned long`.
This change makes only a very minute dent into the much larger project
to teach Git to use `size_t` instead of `unsigned long` wherever
appropriate.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Matt Cooper <vtbassmatt@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is mixed use of size_t and unsigned long to deal with sizes in the
codebase. Recall that Windows defines unsigned long as 32 bits even on
64-bit platforms, meaning that converting size_t to unsigned long narrows
the range. This mostly doesn't cause a problem since Git rarely deals
with files larger than 2^32 bytes.
But adjunct systems such as Git LFS, which use smudge/clean filters to
keep huge files out of the repository, may have huge file contents passed
through some of the functions in entry.c and convert.c. On Windows, this
results in a truncated file being written to the workdir. I traced this to
one specific use of unsigned long in write_entry (and a similar instance
in write_pc_item_to_fd for parallel checkout). That appeared to be for
the call to read_blob_entry, which expects a pointer to unsigned long.
By altering the signature of read_blob_entry to expect a size_t,
write_entry can be switched to use size_t internally (which all of its
callers and most of its callees already used). To avoid touching dozens of
additional files, read_blob_entry uses a local unsigned long to call a
chain of functions which aren't prepared to accept size_t.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Matt Cooper <vtbassmatt@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The filter system allows for alterations to file contents when they're
added to the database or working tree. ("Smudge" when moving to the
working tree; "clean" when moving to the database.) This is used
natively to handle CRLF to LF conversions. It's also employed by Git-LFS
to replace large files from the working tree with small tracking files
in the repo and vice versa.
Git reads the entire smudged file into memory to convert it into a
"clean" form to be used in-core. While this is inefficient, there's a
more insidious problem on some platforms due to inconsistency between
using unsigned long and size_t for the same type of data (size of a file
in bytes). On most 64-bit platforms, unsigned long is 64 bits, and
size_t is typedef'd to unsigned long. On Windows, however, unsigned long
is only 32 bits (and therefore on 64-bit Windows, size_t is typedef'd to
unsigned long long in order to be 64 bits).
Practically speaking, this means 64-bit Windows users of Git-LFS can't
handle files larger than 2^32 bytes. Other 64-bit platforms don't suffer
this limitation.
This commit introduces a test exposing the issue; future commits make it
pass. The test simulates the way Git-LFS works by having a tiny file
checked into the repository and expanding it to a huge file on checkout.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Matt Cooper <vtbassmatt@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow tests that assume a 64-bit `size_t` to be skipped in 32-bit
platforms and regardless of the size of `long`.
This imitates the `LONG_IS_64BIT` prerequisite.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this developer's tests, producing one gigabyte worth of NULs in a
busy loop that writes out individual bytes, unbuffered, took ~27sec.
Writing chunked 256kB buffers instead only took ~0.6sec
This matters because we are about to introduce a pair of test cases that
want to be able to produce 5GB of NULs, and we cannot use `/dev/zero`
because of the HP NonStop platform's lack of support for that device.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d5cfd142ec (tests: teach the test-tool to generate NUL bytes and
use it, 2019-02-14), add a way to generate zeroes in a portable
way without using /dev/zero (needed by HP NonStop), but uses a
long variable that is limited to 2^31 in Windows.
Use instead a (POSIX/C99) intmax_t that is at least 64bit wide
in 64-bit Windows to use in a future test.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
baf8ec8d3a (rebase -r: don't write .git/MERGE_MSG when
fast-forwarding, 2021-08-20) stopped reading the author script in
run_git_commit() when rewording a commit. This is normally safe
because "git commit --amend" preserves the authorship. However if the
user passes "--committer-date-is-author-date" then we need to read the
author date from the author script when rewording. Fix this regression
by tightening the check for when it is safe to skip reading the author
script.
Reported-by: Jonas Kittner <jonas.kittner@ruhr-uni-bochum.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts the change from ed49584 (dir: fix pattern matching on dirs,
2021-09-24), which claimed to fix a directory-matching problem without a
test case. It turns out to _create_ a bug, but it is a bit subtle.
The bug would have been revealed by the first of two tests being added to
t0008-ignores.sh. The first uses a pattern "/git/" inside the a/.gitignores
file, which matches against 'a/git/foo' but not 'a/git-foo/bar'. This test
would fail before the revert.
The second test shows what happens if the test instead uses a pattern "git/"
and this test passes both before and after the revert.
The difference in these two cases are due to how
last_matching_pattern_from_list() checks patterns both if they have the
PATTERN_FLAG_MUSTBEDIR and PATTERN_FLAG_NODIR flags. In the case of "git/",
the PATTERN_FLAG_NODIR is also provided, making the change in behavior in
match_pathname() not affect the end result of
last_matching_pattern_from_list().
Reported-by: Glen Choo <chooglen@google.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is wrong to read some settings directly from the config
subsystem, as things like feature.experimental can affect their
default values.
* gc/use-repo-settings:
gc: perform incremental repack when implictly enabled
fsck: verify multi-pack-index when implictly enabled
fsck: verify commit graph when implicitly enabled
Teach "git commit-graph" command not to allow using replace objects
at all, as we do not use the commit-graph at runtime when we see
object replacement.
* ab/ignore-replace-while-working-on-commit-graph:
commit-graph: don't consider "replace" objects with "verify"
commit-graph tests: fix another graph_git_two_modes() helper
commit-graph tests: fix error-hiding graph_git_two_modes() helper
"git log --grep=string --author=name" learns to highlight hits just
like "git grep string" does.
* hm/paint-hits-in-log-grep:
grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data
pretty: colorize pattern matches in commit messages
grep: refactor next_match() and match_one_pattern() for external use
Mark some tests that match "*fast-import*" as passing when git is
compiled with SANITIZE=leak. They'll now be listed as running under
the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks"
CI target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*config*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*status*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*clone*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*add*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*diff*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*apply*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*notes*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*update-index*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*rev-parse*" as passing when git is
compiled with SANITIZE=leak. They'll now be listed as running under
the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks"
CI target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*rev-list*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As in 7ff24785cb (leak tests: mark some misc tests as passing with
SANITIZE=leak, 2021-10-12) continue marking various miscellaneous
tests as passing when git is compiled with SANITIZE=leak. They'll now
be listed as running under the "GIT_TEST_PASSING_SANITIZE_LEAK=true"
test mode (the "linux-leaks" CI target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark all but one tests that match "*gettext*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
In the case of "t0202-gettext-perl.sh" this isn't very meaningful as
most of the work is on the Perl side, but let's mark it anyway.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark a test that was recently added in e031e9719d (test-mergesort:
add test subcommand, 2021-10-01) as passing with SANITIZE=leak. It
will now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "t1002-read-tree-m-u-2way.sh" test has passed under SANITIZE=leak
since 04988c8d18 (unpack-trees: introduce preserve_ignored to
unpack_trees_options, 2021-09-27) was combined with
e5a917fcf4 (unpack-trees: don't leak memory in
verify_clean_subdirectory(), 2021-10-07), but as both were in-flight
at the time neither could mark it as passing.
It will now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The %(describe) placeholder by default, like `git describe`, uses a
seven-character abbreviated commit object name. This may not be
sufficient to fully describe all commits in a given repository,
resulting in a placeholder replacement changing its length because the
repository grew in size. This could cause the output of git-archive to
change.
Add the --abbrev option to `git describe` to the placeholder interface
in order to provide tools to the user for fine-tuning project defaults
and ensure reproducible archives.
One alternative would be to just always specify --abbrev=40 but this may
be a bit too biased...
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The %(describe) placeholder by default, like `git describe`, only
supports annotated tags. However, some people do use lightweight tags
for releases, and would like to describe those anyway. The command line
tool has an option to support this.
Teach the placeholder to support this as well.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leakfix.
* ab/plug-random-leaks:
reflog: free() ref given to us by dwim_log()
submodule--helper: fix small memory leaks
clone: fix a memory leak of the "git_dir" variable
grep: fix a "path_list" memory leak
grep: use object_array_clear() in cmd_grep()
grep: prefer "struct grep_opt" over its "void *" equivalent
"git push" client talking to an HTTP server did not diagnose the
lack of the final status report from the other side correctly,
which has been corrected.
* jk/http-push-status-fix:
transport-helper: recognize "expecting report" error from send-pack
send-pack: complain about "expecting report" with --helper-status
A new feature has been added to abort early in the test framework.
* ab/test-bail:
test-lib.sh: use "Bail out!" syntax on bad SANITIZE=leak use
test-lib.sh: de-duplicate error() teardown code
This reverts commit fd680bc5 (logmsg_reencode(): warn when iconv()
fails, 2021-08-27). Throwing a warning for each and every commit
that gets reencoded, without allowing a way to squelch, would make
it unpleasant for folks who have to deal with an ancient part of the
history in an old project that used wrong encoding in the commits.
This documents "--verify" option of the commands. It can be used to re-enable
the hooks disabled by an earlier "--no-verify" in command-line.
Signed-off-by: Alexander Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "GIT_TEST_FSYNC" environment variable now exists for
disabling fsync() even on packfiles and other "critical" data.
Running "make test -j8 NO_SVN_TESTS=1" on a noisy 8-core system
on an HDD, test runtime drops from ~4 minutes down to ~3 minutes.
Using "GIT_TEST_FSYNC=1" re-enables fsync() for comparison
purposes.
SVN interopability tests are minimally affected since SVN will
still use fsync in various places.
This will also be useful for 3rd-party tools which create
throwaway git repositories of temporary data, but remains
undocumented for end users.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, we made sure that "git pull --ff-only" (and "git -c
pull.ff=only pull") errors out when our current HEAD is not an
ancestor of the tip of the history we are merging, but the condition
to trigger the error was implemented incorrectly.
Imagine you forked from a remote branch, built your history on top
of it, and then attempted to pull from them again. If they have not
made any update in the meantime, our current HEAD is obviously not
their ancestor, and this new error triggers.
Without the --ff-only option, we just report that there is no need
to pull; we did the same historically with --ff-only, too.
Make sure we do not fail with the recently added check to restore
the historical behaviour.
Reported-by: Kenneth Arnold <ka37@calvin.edu>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit ddfe900612 (test-lib-functions: move function to lib-bitmap.sh,
2021-02-09) meant to include lib-bitmap.sh in t5310, but also includes
lib-bundle.sh. Yet we don't use any of its functions, nor have anything
to do with bundles. This is probably just a typo/copy-paste error, as
lib-bundle.sh was added (correctly) to other scripts in the same series.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option was incorrectly auto-translated to "--no-verify-signatures",
which causes the unexpected effect of the hook being called.
And an even more unexpected effect of disabling verification of signatures.
The manual page describes the option to behave same as the similarly
named option of "git merge", which seems to be the original intention
of this option in the "pull" command.
Signed-off-by: Alexander Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"reset" was previously treated as a standalone special color name
representing `\e[m`. Now, it can apply to other color properties,
allowing exact specifications without implicit attribute inheritance.
For example, "reset green" now renders `\e[;32m`, which is interpreted
as "reset everything; then set foreground to green". This means the
background and other attributes are also reset to their defaults.
Previously, this was impossible to represent in a single color:
"reset" could be specified alone, or a color with attributes, but some
thing like clearing a background color were impossible.
There is a separate change that introduces the "default" color name to
assist with that, but even then, the above could only to be represented
by explicitly disabling each of the attributes:
green default no-bold no-dim no-italic no-ul no-blink no-reverse no-strike
Signed-off-by: Robert Estelle <robertestelle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name "default" can now be used in foreground or background colors,
and means to use the terminal's default color, discarding any
explicitly-set color without affecting the other attributes. On many
modern terminals, this is *not* the same as specifying "white" or
"black".
Although attributes could previously be cleared like "no-bold", there
had not been a similar mechanism available for colors, other than a full
"reset", which cannot currently be combined with other settings.
Note that this is *not* the same as the existing name "normal", which is
a no-op placeholder to permit setting the background without changing
the foreground. (i.e. what is currently called "normal" might have been
more descriptively named "inherit", "none", "pass" or similar).
Signed-off-by: Robert Estelle <robertestelle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email --git-completion-helper" only prints "format-patch"
flags. Make it print "send-email" flags as well, extracting them
programmatically from its three existing "GetOptions".
Introduce a "uniq" subroutine, otherwise --cc-cover, --to-cover and
other flags would show up twice. In addition, deduplicate flags common
to both "send-email" and "format-patch", like --from.
Remove extraneous flags: --h and --git-completion-helper.
Add trailing "=" to options that expect an argument, inline with
the format-patch implementation.
Add a completion test for "send-email --validate", a send-email flag.
Signed-off-by: Thiago Perrotta <tbperrotta@gmail.com>
Based-on-patch-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These three commands recently learned to avoid updating paths outside
the sparse checkout even if they are missing the SKIP_WORKTREE bit. This
is done using path_in_sparse_checkout(), which checks whether a given
path matches the current list of sparsity rules, similar to what
clear_ce_flags() does when we run "git sparse checkout init" or "git
sparse-checkout reapply". However, clear_ce_flags() uses a recursive
approach, applying the match results from parent directories on paths
that get the UNDECIDED result, whereas path_in_sparse_checkout() only
attempts to match the full path and immediately considers UNDECIDED as
NOT_MATCHED. This makes the function miss matches with leading
directories. For example, if the user has the sparsity patterns "!/a"
and "b/", add, rm, and mv will fail to update the path "a/b/c" and end
up displaying a warning about it being outside the sparse checkout even
though it isn't. This problem only occurs in full pattern mode as the
pattern matching functions never return UNDECIDED for cone mode.
To fix this, replicate the recursive behavior of clear_ce_flags() in
path_in_sparse_checkout(), falling back to the parent directory match
when a path gets the UNDECIDED result. (If this turns out to be too
expensive in some cases, we may want to later add some form of caching
to accelerate multiple queries within the same directory. This is not
implemented in this patch, though.) Also add two tests for each affected
command (add, rm, and mv) to check that they behave correctly with the
recursive pattern matching. The first test would previously fail without
this patch while the second already succeeded. It is added mostly to
make sure that we are not breaking the existing pattern matching for
directories that are really sparse, and also as a protection against any
future regressions.
Two other existing tests had to be changed as well: one test in t3602
checks that "git rm -r <dir>" won't remove sparse entries, but it didn't
allow the non-sparse entries inside <dir> to be removed. The other one,
in t7002, tested that "git mv" would correctly display a warning message
for sparse paths, but it accidentally expected the message to include
two non-sparse paths as well.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling `read_midx_file()` to show information about a MIDX or list
the objects contained within it we fail to call `close_midx()`, leaking
the memory allocated to store that MIDX.
Fix this by calling `close_midx()` before exiting the function. We can
drop the "early" return when `show_objects` is non-zero, since the next
instruction is also a return.
(We could just as easily put a `cleanup` label here as with previous
patches. But the only other time we terminate the function early is
when we fail to load a MIDX in the first place. `close_midx()` does
handle a NULL argument, but the extra complexity is likely not
warranted).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of `git reset --hard` being able to use the sparse index
without expanding it, replace the command in `sparse-index is expanded and
converted back` with `git reset -- folder1/a`. This command will need to
expand the index to work properly, even after integrating the rest of
`reset` with sparse index.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change `update_index_from_diff` to set `skip-worktree` when applicable for
new index entries. When `git reset --mixed <tree-ish>` is run, entries in
the index with differences between the pre-reset HEAD and reset <tree-ish>
are identified and handled with `update_index_from_diff`. For each file, a
new cache entry in inserted into the index, created from the <tree-ish> side
of the reset (without changing the working tree). However, the newly-created
entry must have `skip-worktree` explicitly set in either of the following
scenarios:
1. the file is in the current index and has `skip-worktree` set
2. the file is not in the current index but is outside of a defined sparse
checkout definition
Not setting the `skip-worktree` bit leads to likely-undesirable results for
a user. It causes `skip-worktree` settings to disappear on the
"diff"-containing files (but *only* the diff-containing files), leading to
those files now showing modifications in `git status`. For example, when
running `git reset --mixed` in a sparse checkout, some file entries outside
of sparse checkout could show up as deleted, despite the user never deleting
anything (and not wanting them on-disk anyway).
Additionally, add a test to `t7102` to ensure `skip-worktree` is preserved
in a basic `git reset --mixed` scenario and update a failure-documenting
test from 19a0acc (t1092: test interesting sparse-checkout scenarios,
2021-01-23) with new expected behavior.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test clean-up.
* ab/test-lib-diff-cleanup:
tests: stop using top-level "README" and "COPYING" files
"lib-diff" tests: make "README" and "COPYING" test data smaller
Improve test framework around unwritable directories.
* ab/test-cleanly-recreate-trash-directory:
test-lib.sh: try to re-chmod & retry on failed trash removal
Bunch of tests are marked as "passing leak check".
* ab/mark-leak-free-tests-more:
merge: add missing strbuf_release()
ls-files: add missing string_list_clear()
ls-files: fix a trivial dir_clear() leak
tests: fix test-oid-array leak, test in SANITIZE=leak
tests: fix a memory leak in test-oidtree.c
tests: fix a memory leak in test-parse-options.c
tests: fix a memory leak in test-prio-queue.c
Bunch of tests are marked as "passing leak check".
* ab/mark-leak-free-tests:
leak tests: mark some misc tests as passing with SANITIZE=leak
leak tests: mark various "generic" tests as passing with SANITIZE=leak
leak tests: mark some read-tree tests as passing with SANITIZE=leak
leak tests: mark some ls-files tests as passing with SANITIZE=leak
leak tests: mark all checkout-index tests as passing with SANITIZE=leak
leak tests: mark all trace2 tests as passing with SANITIZE=leak
leak tests: mark all ls-tree tests as passing with SANITIZE=leak
leak tests: run various "test-tool" tests in t00*.sh SANITIZE=leak
leak tests: run various built-in tests in t00*.sh SANITIZE=leak
Random changes to parse-options implementation.
* ab/parse-options-cleanup:
parse-options: change OPT_{SHORT,UNSET} to an enum
parse-options tests: test optname() output
parse-options.[ch]: make opt{bug,name}() "static"
commit-graph: stop using optname()
parse-options.c: move optname() earlier in the file
parse-options.h: make the "flags" in "struct option" an enum
parse-options.c: use exhaustive "case" arms for "enum parse_opt_result"
parse-options.[ch]: consistently use "enum parse_opt_result"
parse-options.[ch]: consistently use "enum parse_opt_flags"
parse-options.h: move PARSE_OPT_SHELL_EVAL between enums
Userdiff patterns for the C++ language has been updated.
* js/userdiff-cpp:
userdiff-cpp: back out the digit-separators in numbers
userdiff-cpp: learn the C++ spaceship operator
userdiff-cpp: permit the digit-separating single-quote in numbers
userdiff-cpp: prepare test cases with yet unsupported features
userdiff-cpp: tighten word regex
t4034: add tests showing problematic cpp tokenizations
t4034/cpp: actually test that operator tokens are not split
Fix-up for the other topic already in 'next'.
* fs/ssh-signing-fix:
gpg-interface: fix leak of strbufs in get_ssh_key_fingerprint()
gpg-interface: fix leak of "line" in parse_ssh_output()
ssh signing: clarify trustlevel usage in docs
ssh signing: fmt-merge-msg tests & config parse
Use ssh public crypto for object and push-cert signing.
* fs/ssh-signing:
ssh signing: test that gpg fails for unknown keys
ssh signing: tests for logs, tags & push certs
ssh signing: duplicate t7510 tests for commits
ssh signing: verify signatures using ssh-keygen
ssh signing: provide a textual signing_key_id
ssh signing: retrieve a default key from ssh-agent
ssh signing: add ssh key format and signing code
ssh signing: add test prereqs
ssh signing: preliminary refactoring and clean-up
Recent sparse-index addition, namely any use of index_name_pos(),
can expand sparse index entries and breaks any code that walks
cache-tree or existing index entries. One such instance of such a
breakage has been corrected.
* pw/sparse-cache-tree-verify-fix:
t1092: run "rebase --apply" without "-q" in testing
sparse index: fix use-after-free bug in cache_tree_verify()
"git commit" gave duplicated error message when the object store
was unwritable, which has been corrected.
* ab/fix-commit-error-message-upon-unwritable-object-store:
commit: fix duplication regression in permission error output
unwritable tests: assert exact error output
Avoid performance measurements from getting ruined by gc and other
housekeeping pauses interfering in the middle.
* rs/disable-gc-during-perf-tests:
perf: disable automatic housekeeping
Follow through the work to use the repo interface to access
submodule objects in-process, instead of abusing the alternate
object database interface.
* jt/no-abuse-alternate-odb-for-submodules:
submodule: trace adding submodule ODB as alternate
submodule: pass repo to check_has_commit()
object-file: only register submodule ODB if needed
merge-{ort,recursive}: remove add_submodule_odb()
refs: peeling non-the_repository iterators is BUG
refs: teach arbitrary repo support to iterators
refs: plumb repo into ref stores
Leakfix.
* ab/unpack-trees-leakfix:
sequencer: fix a memory leak in do_reset()
sequencer: add a "goto cleanup" to do_reset()
unpack-trees: don't leak memory in verify_clean_subdirectory()
"git fsck" has been taught to report mismatch between expected and
actual types of an object better.
* ab/fsck-unexpected-type:
fsck: report invalid object type-path combinations
fsck: don't hard die on invalid object types
object-file.c: stop dying in parse_loose_header()
object-file.c: return ULHR_TOO_LONG on "header too long"
object-file.c: use "enum" return type for unpack_loose_header()
object-file.c: simplify unpack_loose_short_header()
object-file.c: make parse_loose_header_extended() public
object-file.c: return -1, not "status" from unpack_loose_header()
object-file.c: don't set "typep" when returning non-zero
cat-file tests: test for current --allow-unknown-type behavior
cat-file tests: add corrupt loose object test
cat-file tests: test for missing/bogus object with -t, -s and -p
cat-file tests: move bogus_* variable declarations earlier
fsck tests: test for garbage appended to a loose object
fsck tests: test current hash/type mismatch behavior
fsck tests: refactor one test to use a sub-repo
fsck tests: add test for fsck-ing an unknown type
The implementation of digit-separating single-quotes introduced a
note-worthy regression: the change of a character literal with a
digit would splice the digit and the closing single-quote. For
example, the change from 'a' to '2' is now tokenized as
'[-a'-]{+2'+} instead of '[-a-]{+2+}'.
The options to fix the regression are:
- Tighten the regular expression such that the single-quote can only
occur between digits (that would match the official syntax).
- Remove support for digit separators.
I chose to remove support, because
- I have not seen a lot of code make use of digit separators.
- If code does use digit separators, then the numbers are typically
long. If a change in one of the segments occurs, it is actually
better visible if only that segment is highlighted as the word
that changed instead of the whole long number.
This choice does introduce another minor regression, though, which
is highlighted in the test case: when a change occurs in the second
or later segment of a hexadecimal number where the segment begins
with a digit, but also has letters, the segment is mistaken as
consisting of a number and an identifier. I can live with that.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Free the "path_list" used in builtin/grep.c, it was declared as
STRING_LIST_INIT_NODUP, let's change it to a STRING_LIST_INIT_DUP
since an early user in cmd_grep() appends a string passed via
parse-options.c to it, which needs to be duplicated.
Let's then convert the remaining callers to use
string_list_append_nodup() instead, allowing us to free the list.
This makes all the tests in t7811-grep-open.sh pass, 6/10 would fail
before this change. The only remaining failure would have been due to
a stray "git checkout" (which still leaks memory). In this case we can
use a "git reset --hard" instead, so let's do that, and move the
test_when_finished() above the code that would modify the relevant
file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The v2 porcelain format is very convenient for obtaining a lot of
information about the current state of the repo, but does not contain
any info about the stash. git status already accepts --show-stash but
it's silently ignored when --porcelain=v2 is given.
Let's add a simple line to print the number of stash entries but in a
format similar in style to the rest of the format.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in the error() path in handle_path_include(), this
allows us to run t1305-config-include.sh under SANITIZE=leak,
previously 4 tests there would fail. This fixes up a leak in
9b25a0b52e (config: add include directive, 2012-02-06).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The for-each-ref family of commands invoke parsers immediately when
it sees each --sort=<atom> option, and die before even seeing the
other options on the command line when the <atom> is unrecognised.
Instead, accumulate them in a string list, and have them parsed into
a ref_sorting structure after the command line parsing is done. As
a consequence, "git branch --sort=bogus -h" used to fail to give the
brief help, which arguably may have been a feature, now does so,
which is more consistent with how other options work.
The patch is smaller than the actual extent of the "damage" to the
codebase, thanks to the fact that the original code consistently
used OPT_REF_SORT() macro to handle command line options. We only
needed to replace the variable used for the list, and implementation
of the callback function used in the macro.
The old rule was for the users of the API to:
- Declare ref_sorting and ref_sorting_tail variables;
- OPT_REF_SORT() macro will instantiate ref_sorting instance (which
may barf and die) and append it to the tail;
- Append to the tail each ref_sorting read from the configuration
by parsing in the config callback (which may barf and die);
- See if ref_sorting is null and use ref_sorting_default() instead.
Now the rule is not all that different but is simpler:
- Declare ref_sorting_options string list.
- OPT_REF_SORT() macro will append it to the string list;
- Append to the string list the sort key read from the
configuration;
- call ref_sorting_options() to turn the string list to ref_sorting
structure (which also deals with the default value).
As side effects, this change also cleans up a few issues:
- 95be717c (parse_opt_ref_sorting: always use with NONEG flag,
2019-03-20) muses that "git for-each-ref --no-sort" should simply
clear the sort keys accumulated so far; it now does.
- The implementation detail of "struct ref_sorting" and the helper
function parse_ref_sorting() can now be private to the ref-filter
API implementation.
- If you set branch.sort to a bogus value, the any "git branch"
invocation, not only the listing mode, would abort with the
original code; now it doesn't
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent sparse-index work broke safety against attempts to add paths
with trailing slashes to the index, which has been corrected.
* rs/make-verify-path-really-verify-again:
read-cache: let verify_path() reject trailing dir separators again
read-cache: add verify_path_internal()
t3905: show failure to ignore sub-repo
"git cat-file --batch" with the "--batch-all-objects" option is
supposed to iterate over all the objects found in a repository, but
it used to translate these object names using the replace mechanism,
which defeats the point of enumerating all objects in the repository.
This has been corrected.
* jk/cat-file-batch-all-wo-replace:
cat-file: use packed_object_info() for --batch-all-objects
cat-file: split ordered/unordered batch-all-objects callbacks
cat-file: disable refs/replace with --batch-all-objects
cat-file: mention --unordered along with --batch-all-objects
t1006: clean up broken objects
"git repack" has been taught to generate multi-pack reachability
bitmaps.
* tb/repack-write-midx:
test-read-midx: fix leak of bitmap_index struct
builtin/repack.c: pass `--refs-snapshot` when writing bitmaps
builtin/repack.c: make largest pack preferred
builtin/repack.c: support writing a MIDX while repacking
builtin/repack.c: extract showing progress to a variable
builtin/repack.c: rename variables that deal with non-kept packs
builtin/repack.c: keep track of existing packs unconditionally
midx: preliminary support for `--refs-snapshot`
builtin/multi-pack-index.c: support `--stdin-packs` mode
midx: expose `write_midx_file_only()` publicly
The "--preserve-merges" option of "git rebase" has been removed.
* js/retire-preserve-merges:
sequencer: restrict scope of a formerly public function
rebase: remove a no-longer-used function
rebase: stop mentioning the -p option in comments
rebase: remove obsolete code comment
rebase: drop the internal `rebase--interactive` command
git-svn: drop support for `--preserve-merges`
rebase: drop support for `--preserve-merges`
pull: remove support for `--rebase=preserve`
tests: stop testing `git rebase --preserve-merges`
remote: warn about unhandled branch.<name>.rebase values
t5520: do not use `pull.rebase=preserve`
The mergesort implementation used to sort linked list has been
optimized.
* rs/mergesort:
test-mergesort: use repeatable random numbers
mergesort: use ranks stack
p0071: test performance of llist_mergesort()
p0071: measure sorting of already sorted and reversed files
test-mergesort: add unriffle_skewed mode
test-mergesort: add unriffle mode
test-mergesort: add generate subcommand
test-mergesort: add test subcommand
test-mergesort: add sort subcommand
test-mergesort: use strbuf_getline()
When a transport helper pushes via send-pack, it passes --helper-status
to get a machine-readable status back for each ref. The previous commit
taught the send-pack code to hand back "error expecting report" if the
server did not send us the proper ref-status. And that's enough to cause
us to recognize that an error occurred for the ref and print something
sensible in our final status table.
But we do interpret these messages on the remote-helper side to turn
them back into REF_STATUS_* enum values. Recognizing this token to turn
it back into REF_STATUS_EXPECTING_REPORT has two advantages:
1. We now print exactly the same message in the human-readable (and
machine-readable --porcelain) output for this situation whether the
transport went through a helper (e.g., http) or not (e.g., ssh).
2. If any code in the helper really cares about distinguishing
EXPECT_REPORT from more generic error conditions, it could now do
so. I didn't find any, so this is mostly future-proofing.
So this is mostly cosmetic for now, but it seems like the
least-surprising thing for the transport-helper code to be doing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing to a server which erroneously omits the final ref-status
report, the client side should complain about the refs for which we
didn't receive the status (because we can't just assume they were
updated). This works over most transports like ssh, but for http we'll
print a very misleading "Everything up-to-date".
It works for ssh because send-pack internally sets the status of each
ref to REF_STATUS_EXPECTING_REPORT, and then if the server doesn't tell
us about a particular ref, it will stay at that value. When we print the
final status table, we'll see that we're still on EXPECTING_REPORT and
complain then.
But for http, we go through remote-curl, which invokes send-pack with
"--stateless-rpc --helper-status". The latter option causes send-pack to
return a machine-readable list of ref statuses to the remote helper. But
ever since its inception in de1a2fdd38 (Smart push over HTTP: client
side, 2009-10-30), the send-pack code has simply omitted mention of any
ref which ended up in EXPECTING_REPORT.
In the remote helper, we then take the absence of any status report
from send-pack to mean that the ref was not even something we tried to
send, and thus it prints "Everything up-to-date". Fortunately it does
detect the eventual non-zero exit from send-pack, and propagates that in
its own non-zero exit code. So at least a careful script invoking "git
push" would notice the failure. But sending the misleading message on
stderr is certainly confusing for humans (not to mention the
machine-readable "push --porcelain" output, though again, any careful
script should be checking the exit code from push, too).
Nobody seems to have noticed because the server in this instance has to
be misbehaving: it has promised to support the ref-status capability
(otherwise the client will not set EXPECTING_REPORT at all), but didn't
send us any. If the connection were simply cut, then send-pack would
complain about getting EOF while trying to read the status. But if the
server actually sends a flush packet (i.e., saying "now you have all of
the ref statuses" without actually sending any), then the client ends up
in this confused situation.
The fix is simple: we should return an error message from "send-pack
--helper-status", just like we would for any other error per-ref error
condition (in the test I included, the server simply omits all ref
status responses, but a more insidious version of this would skip only
some of them).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stash only the changes that are staged.
This mode allows to easily stash-out for later reuse some changes
unrelated to the current work in progress.
Unlike 'stash push --patch', --staged supports use of any tool to
select the changes to stash-out, including, but not limited to 'git
add --interactive'.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We run a few operations and make sure they produce identical results
with and without sparse-index; the version we merged to the "next"
branch used the "-q" option to work around a breakage caused by a
version used at Microsoft with some unreleased changes, but since
we would want to make sure the commands produce identical results,
including reports given to the output that lists which commits were
picked, use of "-q" loses too much interesting information.
Let's drop "-q" from the command invocation and revisit the issue
when the problematic changes are upstreamed.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the transitory refs_werrres_ref_unsafe() function to
refs_resolve_ref_unsafe(), now that all callers of the old function
have learned to pass in a "failure_errno" parameter.
The coccinelle semantic patch added in the preceding commit works, but
I couldn't figure out how to get spatch(1) to re-flow these argument
lists (and sometimes make lines way too long), so this rename was done
with:
perl -pi -e 's/refs_werrres_ref_unsafe/refs_resolve_ref_unsafe/g' \
$(git grep -l refs_werrres_ref_unsafe -- '*.c')
But after that "make contrib/coccinelle/refs.cocci.patch" comes up
empty, so the result would have been the same. Let's remove that
transitory semantic patch file, we won't need to retain it for any
other in-flight changes, refs_werrres_ref_unsafe() only existed within
this patch series.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cmd_resolve_ref() function has always ignored errno on failure,
but let's do so explicitly when using the refs_resolve_ref_unsafe()
function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests that cover blindspots in "git reflog delete --updateref"
behavior. Before this change removing the "type & REF_ISSYMREF" check
added in 5e6f003ca8 (reflog_expire(): ignore --updateref for symbolic
references, 2015-03-03) would not fail any tests.
The "--updateref" option was added in 55f1056537 (git-reflog: add
option --updateref to write the last reflog sha1 into the ref,
2008-02-22) for use in git-stash.sh, see e25d5f9c82 (git-stash: add
new 'drop' subcommand, 2008-02-22).
Even though the regression test I need is just the "C" case here,
let's test all these combinations for good measure. I started out
doing these as a for-loop, but I think this is more readable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for "git branch" to cover the case where .git/refs is
symlinked. To check availability, refs_verify_refname_available() will
run refs_read_raw_ref() on each prefix, leading to a read() from
.git/refs (which is a directory).
It would probably be more robust to re-issue the lstat() as a normal
stat(), in which case, we would fall back to the directory case, but
for now let's just test for the existing behavior as-is. This test
covers a regression in a commit that only ever made it to "next", see
[1].
1. http://lore.kernel.org/git/pull.1068.git.git.1629203489546.gitgitgadget@gmail.com
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/gc.c has two ways of checking if multi-pack-index is enabled:
- git_config_get_bool() in incremental_repack_auto_condition()
- the_repository->settings.core_multi_pack_index in
maintenance_task_incremental_repack()
The two implementations have existed since the incremental-repack task
was introduced in e841a79a13 (maintenance: add incremental-repack auto
condition, 2020-09-25). These two values can diverge because
prepare_repo_settings() enables the feature in the_repository->settings
by default.
In the case where core.multiPackIndex is not set in the config, the auto
condition would fail, causing the incremental-repack task to not be
run. Because we always want to consider the default values, we should
always use the_repository->settings.
Standardize on using the_repository->settings.core_multi_pack_index to
check if multi-pack-index is enabled.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like the previous commit, change fsck to check the
"core_multi_pack_index" variable set in "repo-settings.c" instead of
reading the "core.multiPackIndex" config variable. This fixes a bug
where we wouldn't verify midx if the config key was missing. This bug
was introduced in 18e449f86b (midx: enable core.multiPackIndex by
default, 2020-09-25) where core.multiPackIndex was turned on by default.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change fsck to check the "core_commit_graph" variable set in
"repo-settings.c" instead of reading the "core.commitGraph" variable.
This fixes a bug where we wouldn't verify the commit-graph if the
config key was missing. This bug was introduced in
31b1de6a09 (commit-graph: turn on commit-graph by default, 2019-08-13),
where core.commitGraph was turned on by default.
Add tests to "t5318-commit-graph.sh" to verify that fsck checks the
commit-graph as expected for the 3 values of core.commitGraph. Also,
disable GIT_TEST_COMMIT_GRAPH in t/t0410-partial-clone.sh because some
test cases use fsck in ways that assume that commit-graph checking is
disabled.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we attempt to grep non-ascii log message text with an ascii pattern, we
run into the following issue:
$ git log --color --author='.var.*Bjar' -1 origin/master | grep ^Author
grep: (standard input): binary file matches
So, to fix this teach the grep code to use PCRE2_UTF, as long as the log
output is encoded in UTF-8.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 459b8d22e5 (tests: do not borrow from COPYING and README from the
real source, 2015-02-15) tests that used "lib-diff.sh" (called
"diff-lib.sh" then) were made to stop relying on the top-level COPYING
file, but we still had other tests that referenced it.
Let's move them over to use the "COPYING_test_data" utility function
introduced in the preceding commit, and in the case of the one test
that needed the "README" file use a ROT 13 version of that "COPYING"
test data. That test added in afd222967c (Extend testing git-mv for
renaming of subdirectories, 2006-07-26) just needs more test data that's not the same as the "COPYING" test data, so a ROT 13 version will do.
This change removes the last references to ../{README,COPYING} in the
test suite.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow-up the change in 459b8d22e5 (tests: do not borrow from COPYING
and README from the real source, 2015-02-15) by not shipping a full
copy of older versions of the top-level "COPYING" and "README" files.
The tests that use them just need the small blurb at the top of
"COPYING" as test data, or mock data that's dissimilar. Let's provide
that with a "COPYING_test_data" function instead.
We're not replacing this with some other generic test
data (e.g. "lorum ipsum") because these tests require test file header
to be the old "COPYING" file. See e.g. "t4003-diff-rename-1.sh" which
changes the file, and then does full "test_cmp" comparisons on the
resulting "git diff" output.
This change only changes tests that used the "lib-diff.sh" library,
but splits up what they need into a new "lib-diff-data.sh". A
subsequent commit will change related tests that were missed in
459b8d22e5.
For the test in "t4008-diff-break-rewrite.sh" the "README" file can go
away in favor of echoing the line "some dissimilar content" to a file
in the one test that needed it.
The point of that test is to start with files "A" and "B", and then
have A be more similar to the state of "B" than to its old version (by
copying over the content from the "COPYING" file). Just comparing the
pre-image of "some dissimilar content" and later a munged version of
the "COPYING" output serves that purpose.
While we're at it get rid of a stray "echo $tree" debugging line added
in 15d061b435 ([PATCH] Fix the way diffcore-rename records unremoved
source., 2005-05-27), and stop calling "hash-object" to get the hash
of an object we've just added to the index. We can instead extract
that information from the index itself with "rev-parse".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the code added in d6538246d3 (commit-graph: not compatible
with replace objects, 2018-08-20) which ignored replace objects in the
"write" command to ignore it in the "verify" command too.
We can just move this assignment to the cmd_commit_graph(), it
dispatches to "write" and "verify", and we're unlikely to ever get a
sub-command that would like to consider replace refs.
This will make tests added in eddc1f556c (mktag tests: test
update-ref and reachable fsck, 2021-06-17) pass in combination with
the "GIT_TEST_COMMIT_GRAPH" mode added in 859fdc0c3c (commit-graph:
define GIT_TEST_COMMIT_GRAPH, 2018-08-29), except that mode is
currently broken (but is being fixed concurrently). See the discussion
starting at [1].
1. https://lore.kernel.org/git/87wnmihswp.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 135a712375 (commit-graph: add --split option to builtin,
2019-06-18) this function was copy/pasted to the split commit-graph
tests, as in the preceding commit we need to fix this to use
&&-chaining, so it won't be hiding errors.
Unlike its sister function in "t5318-commit-graph.sh", which we got
lucky with, this one was hiding a real test failure. A tests added in
c523035cbd (commit-graph: allow cross-alternate chains, 2019-06-18)
has never worked as intended. Unlike most other graph_git_behavior
uses in this file it clones the repository into a sub-directory, so
we'll need to refer to "commits/6" as "origin/commits/6".
It's not easy to simply move the "graph_git_behavior" to the test
above it, since it itself spawns a "test_expect_success". Let's
instead add support to "graph_git_behavior()" and
"graph_git_two_modes()" to pass a "-C" argument to git.
We also need to add a "test -d fork" here, because otherwise we'll
fail on e.g.:
GIT_SKIP_TESTS=t5324.13 ./t5324-split-commit-graph.sh
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The graph_git_two_modes() helper added in 177722b344 (commit:
integrate commit graph with commit parsing, 2018-04-10) didn't
&&-chain its "git commit-graph" invocations, which as can be seen with
SANITIZE=leak will happily mark tests as passing if both of these
commands die, since test_cmp() will be comparing two empty files.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Try to re-chmod the trash directory on startup if we fail to "rm -rf"
it. This fixes problems where the test leaves the trash directory
behind in a bad permission state for whatever reason.
This fixes an interaction between [1] where t0004-unwritable.sh was
made to use "test_when_finished" for cleanup, and [2] which added the
"--immediate" mode. If a test in this file failed when running with
"--immediate" we wouldn't run the "test_when_finished" block, which
re-chmods the ".git/objects" directory (see [1]).
This can be demonstrated as e.g. (output snipped for less verbosity):
$ ./t0004-unwritable.sh --run=3 --immediate
ok 1 # skip setup (--run)
ok 2 # skip write-tree should notice unwritable repository (--run)
not ok 3 - commit should notice unwritable repository
[...]
$ ./t0004-unwritable.sh --run=3 --immediate
rm: cannot remove '[...]/trash directory.t0004-unwritable/.git/objects/info': Permission denied
FATAL: Cannot prepare test area
[...]
Instead of some version of reverting [1] let's make the test-lib.sh
resilient to this edge-case, it will happen due to [1], but also
e.g. if the relevant "test-lib.sh" process is kill -9'd during the
test run. We should try harder to recover in this case. If we fail to
remove the test directory let's retry after (re-)chmod-ing it.
This doesn't need to be guarded by something that's equivalent to
"POSIXPERM" since if we don't support "chmod" we were about to fail
anyway.
Let's also discard any error output from (a possibly nonexisting)
"chmod", we'll fail on the subsequent "rm -rf" anyway, likewise for
the first "rm -rf" invocation, we don't want to get the "cannot
remove" output if we can get around it with the "chmod", but we do
want any error output from the second "rm -rf", in case that doesn't
fix the issue.
The lack of &&-chaining between the "chmod" and "rm -rf" is
intentional, if we fail the first "rm -rf", can't chmod, but then
succeed the second time around that's what we were hoping for. We just
want to nuke the directory, not carry forward every possible error
code or error message.
1. dbda967684 (t0004 (unwritable files): simplify error handling,
2010-09-06)
2. b586744a86 (test: skip clean-up when running under --immediate
mode, 2011-06-27)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode added in
956d2e4639 (tests: add a test mode for SANITIZE=leak, run it in CI,
2021-09-23) to use a TAP "Bail out!" message when exiting. This will
cause the test run to exit immediately under a TAP consumer like
"prove(1)".
See 614fe01521 (test-lib: bail out when "-v" used under "prove",
2016-10-22) for the initial introduction of "Bail out!" to the
--verbose being amended here.
Before this compiling with "SANITIZE=" and running the tests with
"prove(1)" would cause all the tests to be run to the end (output
trimmed for fewer columns):
$ GIT_TEST_PASSING_SANITIZE_LEAK=true make
rm -f -r 'test-results'
*** prove ***
t0000-basic.sh ......... Dubious, test returned 1 (wstat 256, 0x100)
No subtests run
t0001-init.sh .......... Dubious, test returned 1 (wstat 256, 0x100)
No subtests run
[...output where we list every single t[0-9]*.sh file as failing snipped]
Whereas now we'll fail early, like this ("->" line wrapping added):
$ GIT_TEST_PASSING_SANITIZE_LEAK=true make
[...]
t0000-basic.sh ..................................... Bailout called. Further testing stopped:
-> GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except when compiled with SANITIZE=leak
FAILED--Further testing stopped: GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except
-> when compiled with SANITIZE=leak
make: *** [Makefile:53: prove] Error 1
This change also adds a red color to the "Bailout called" line, as
we're now using "say_color error". That improves existing output in
the case of e.g.:
$ prove -j8 t[0-9]*.sh :: -v
Bailout called. Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
FAILED--Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
We don't need to have a "Bail out! " prefix when we're not running
under a TAP consumer (i.e. if test -n "$HARNESS_ACTIVE"), but let's
not make the output conditional on that. Showing it under e.g.:
$ GIT_TEST_PASSING_SANITIZE_LEAK=true ./t0095-bloom.sh
Bail out! GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except when compiled with SANITIZE=leak
Doesn't harm anything, and I don't think the (small) complexity of
only adding this if we're under "$HARNESS_ACTIVE" is worth it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
De-duplicate the "finalize_junit_xml; GIT_EXIT_OK=t; exit 1" code
shared between the "error()" and "--immediate on failure" code paths,
in preparation for adding a third user in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git cmd -h" shows more than one line of usage text (e.g.
the cmd subcommand may take sub-sub-command), parse-options API
learned to align these lines, even across i18n/l10n.
* ab/align-parse-options-help:
parse-options: properly align continued usage output
git rev-parse --parseopt tests: add more usagestr tests
send-pack: properly use parse_options() API for usage string
parse-options API users: align usage output in C-strings
Teach "git help -c" into helping the command line completion of
configuration variables.
* ab/help-config-vars:
help: move column config discovery to help.c library
help / completion: make "git help" do the hard work
help tests: test --config-for-completion option & output
help: simplify by moving to OPT_CMDMODE()
help: correct logic error in combining --all and --guides
help: correct logic error in combining --all and --config
help tests: add test for --config output
help: correct usage & behavior of "git help --guides"
help: correct the usage string in -h and documentation
Built-in fsmonitor (part 1).
* jh/builtin-fsmonitor-part1:
t/helper/simple-ipc: convert test-simple-ipc to use start_bg_command
run-command: create start_bg_command
simple-ipc/ipc-win32: add Windows ACL to named pipe
simple-ipc/ipc-win32: add trace2 debugging
simple-ipc: move definition of ipc_active_state outside of ifdef
simple-ipc: preparations for supporting binary messages.
trace2: add trace2_child_ready() to report on background children
Updates to the tests in t0000 to test the test framework.
* ab/lib-subtest:
test-lib tests: get rid of copy/pasted mock test code
test-lib tests: assert 1 exit code, not non-zero
test-lib tests: refactor common part of check_sub_test_lib_test*()
test-lib tests: avoid subshell for "test_cmp" for readability
test-lib tests: don't provide a description for the sub-tests
test-lib tests: split up "write and run" into two functions
test-lib tests: move "run_sub_test" to a new lib-subtest.sh
Various fixes in code paths that move untracked files away to make room.
* en/removing-untracked-fixes:
Documentation: call out commands that nuke untracked files/directories
Comment important codepaths regarding nuking untracked files/dirs
unpack-trees: avoid nuking untracked dir in way of locally deleted file
unpack-trees: avoid nuking untracked dir in way of unmerged file
Change unpack_trees' 'reset' flag into an enum
Remove ignored files by default when they are in the way
unpack-trees: make dir an internal-only struct
unpack-trees: introduce preserve_ignored to unpack_trees_options
read-tree, merge-recursive: overwrite ignored files by default
checkout, read-tree: fix leak of unpack_trees_options.dir
t2500: add various tests for nuking untracked files
"git grep --recurse-submodules" takes trees and blobs from the
submodule repository, but the textconv settings when processing a
blob from the submodule is not taken from the submodule repository.
A test is added to demonstrate the issue, without fixing it.
* mt/grep-submodule-textconv:
grep: demonstrate bug with textconv attributes and submodules
"git add", "git mv", and "git rm" have been adjusted to avoid
updating paths outside of the sparse-checkout definition unless
the user specifies a "--sparse" option.
* ds/add-rm-with-sparse-index:
advice: update message to suggest '--sparse'
mv: refuse to move sparse paths
rm: skip sparse paths with missing SKIP_WORKTREE
rm: add --sparse option
add: update --renormalize to skip sparse paths
add: update --chmod to skip sparse paths
add: implement the --sparse option
add: skip tracked paths outside sparse-checkout cone
add: fail when adding an untracked sparse file
dir: fix pattern matching on dirs
dir: select directories correctly
t1092: behavior for adding sparse files
t3705: test that 'sparse_entry' is unstaged
When parsing a URL to normalize it, we allow hostnames to contain only
dot (".") or dash ("-"), plus brackets and colons for IPv6 literals.
This matches the old URL standard in RFC 1738, which says:
host = hostname | hostnumber
hostname = *[ domainlabel "." ] toplabel
domainlabel = alphadigit | alphadigit *[ alphadigit | "-" ] alphadigit
But this was later updated by RFC 3986, which is more liberal:
host = IP-literal / IPv4address / reg-name
reg-name = *( unreserved / pct-encoded / sub-delims )
unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~"
While names with underscore in them are not common and possibly violate
some DNS rules, they do work in practice, and we will happily contact
them over http://, git://, or ssh://. It seems odd to ignore them for
purposes of URL matching, especially when the URL RFC seems to allow
them.
There shouldn't be any downside here. It's not a syntactically
significant character in a URL, so we won't be confused about parsing;
we'd have simply rejected such a URL previously (the test here checks
the url code directly, but the obvious user-visible effect would be
failing to match credential.http://foo_bar.example.com.helper, or
similar config in http.<url>.*).
Arguably we'd want to allow tilde ("~") here, too. There's likewise
probably no downside, but I didn't add it simply because it seems like
an even less likely character to appear in a hostname.
Reported-by: Alex Waite <alex@waite.eu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*{mktree,commit,diff,grep,rm,merge,hunk}*"
as passing when git is compiled with SANITIZE=leak. They'll now be
listed as running under the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test
mode (the "linux-leaks" CI target).
These were picked because we still have a lot of failures in adjacent
areas, and we didn't have much if any coverage of e.g. grep and diff
before this change, we could still whitelist a lot more tests, but
let's stop for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark various "generic" tests as passing when git is compiled with
SANITIZE=leak. These tests were subjectively picked from the lists of
passing tests since they're all small, and test some generic feature
such as wildmatch(), commonly used environment variables, ident
parsing etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*read-tree*" as passing when git is
compiled with SANITIZE=leak. They'll now be listed as running under
the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks"
CI target). We still have around half the tests that match
"*read-tree*" failing, but let's whitelist those that don't.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*ls-files*" as passing when git is
compiled with SANITIZE=leak. They'll now be listed as running under
the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks"
CI target). We still have others that match '*ls-files*" that fail
under SANITIZE=leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*{checkout,switch}*" as passing when git
is compiled with SANITIZE=leak. They'll now be listed as running under
the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks"
CI target).
Unfortunately almost all of those tests fail when compiled with
SANITIZE=leak, these only pass because they run "checkout-index", not
the main "checkout" command.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark all tests that match "*trace2*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark those tests that match "*ls-tree*" as passing when git is
compiled with SANITIZE=leak. They'll now be listed as running under
the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks"
CI target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark various existing tests in t00*.sh that invoke a "test-tool" with
as passing when git is compiled with SANITIZE=leak.
They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark various existing tests in t00*.sh that invoke git built-ins with
TEST_PASSES_SANITIZE_LEAK=true as passing when git is compiled with
SANITIZE=leak.
They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Protocol v0 clients can get stuck parsing a malformed feature line.
* ah/connect-parse-feature-v0-fix:
connect: also update offset for features without values
Sensitive data in the HTTP trace were supposed to be redacted, but
we failed to do so in HTTP/2 requests.
* jk/http-redact-fix:
http: match headers case-insensitively when redacting
"git cvsserver" had a long-standing bug in its authentication code,
which has finally been corrected (it is unclear and is a separate
question if anybody is seriously using it, though).
* cb/cvsserver:
Documentation: cleanup git-cvsserver
git-cvsserver: protect against NULL in crypt(3)
git-cvsserver: use crypt correctly to compare password hashes
"git clone" from a repository whose HEAD is unborn into a bare
repository didn't follow the branch name the other side used, which
is corrected.
* jk/clone-unborn-head-in-bare:
clone: handle unborn branch in bare repos
