When comparing commit messages, we need to keep in mind that they are
indented by four spaces. That is, empty lines are no longer empty, but
have "trailing whitespace". When displaying them in color, that results
in those nagging red lines.
Let's just right-trim the lines in the commit message, it's not like
trailing white-space in the commit messages are important enough to care
about in `git range-diff`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like tbdiff, we now show the diff between matching patches. This is
a "diff of two diffs", so it can be a bit daunting to read for the
beginner.
An alternative would be to display an interdiff, i.e. the hypothetical
diff which is the result of first reverting the old diff and then
applying the new diff.
Especially when rebasing frequently, an interdiff is often not feasible,
though: if the old diff cannot be applied in reverse (due to a moving
upstream), an interdiff can simply not be inferred.
This commit brings `range-diff` closer to feature parity with regard
to tbdiff.
To make `git range-diff` respect e.g. color.diff.* settings, we have
to adjust git_branch_config() accordingly.
Note: while we now parse diff options such as --color, the effect is not
yet the same as in tbdiff, where also the commit pairs would be colored.
This is left for a later commit.
Note also: while tbdiff accepts the `--no-patches` option to suppress
these diffs between patches, we prefer the `-s` (or `--no-patch`) option
that is automatically supported via our use of diff_opt_parse().
And finally note: to support diff options, we have to call
`parse_options()` such that it keeps unknown options, and then loop over
those and let `diff_opt_parse()` handle them. After that loop, we have
to call `parse_options()` again, to make sure that no unknown options
are left.
Helped-by: Thomas Gummerer <t.gummerer@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch lets `git range-diff` use the same order as tbdiff.
The idea is simple: for left-to-right readers, it is natural to assume
that the `git range-diff` is performed between an older vs a newer
version of the branch. As such, the user is probably more interested in
the question "where did this come from?" rather than "where did that one
go?".
To that end, we list the commits in the order of the second commit range
("the newer version"), inserting the unmatched commits of the first
commit range as soon as all their predecessors have been shown.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At this stage, `git range-diff` can determine corresponding commits
of two related commit ranges. This makes use of the recently introduced
implementation of the linear assignment algorithm.
The core of this patch is a straight port of the ideas of tbdiff, the
apparently dormant project at https://github.com/trast/tbdiff.
The output does not at all match `tbdiff`'s output yet, as this patch
really concentrates on getting the patch matching part right.
Note: due to differences in the diff algorithm (`tbdiff` uses the Python
module `difflib`, Git uses its xdiff fork), the cost matrix calculated
by `range-diff` is different (but very similar) to the one calculated
by `tbdiff`. Therefore, it is possible that they find different matching
commits in corner cases (e.g. when a patch was split into two patches of
roughly equal length).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command does not do a whole lot so far, apart from showing a usage
that is oddly similar to that of `git tbdiff`. And for a good reason:
the next commits will turn `range-branch` into a full-blown replacement
for `tbdiff`.
At this point, we ignore tbdiff's color options, as they will all be
implemented later using diff_options.
Since f318d73915 (generate-cmds.sh: export all commands to
command-list.h, 2018-05-10), every new command *requires* a man page to
build right away, so let's also add a blank man page, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The problem solved by the code introduced in this commit goes like this:
given two sets of items, and a cost matrix which says how much it
"costs" to assign any given item of the first set to any given item of
the second, assign all items (except when the sets have different size)
in the cheapest way.
We use the Jonker-Volgenant algorithm to solve the assignment problem to
answer questions such as: given two different versions of a topic branch
(or iterations of a patch series), what is the best pairing of
commits/patches between the different versions?
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Look for broken "&&" chains that are hidden in subshell, many of
which have been found and corrected.
* es/chain-lint-in-subshell:
t/chainlint.sed: drop extra spaces from regex character class
t/chainlint: add chainlint "specialized" test cases
t/chainlint: add chainlint "complex" test cases
t/chainlint: add chainlint "cuddled" test cases
t/chainlint: add chainlint "loop" and "conditional" test cases
t/chainlint: add chainlint "nested subshell" test cases
t/chainlint: add chainlint "one-liner" test cases
t/chainlint: add chainlint "whitespace" test cases
t/chainlint: add chainlint "basic" test cases
t/Makefile: add machinery to check correctness of chainlint.sed
t/test-lib: teach --chain-lint to detect broken &&-chains in subshells
The lazy clone support had a few places where missing but promised
objects were not correctly tolerated, which have been fixed.
* jt/tags-to-promised-blobs-fix:
tag: don't warn if target is missing but promised
revision: tolerate promised targets of tags
Add a server-side knob to skip commits in exponential/fibbonacci
stride in an attempt to cover wider swath of history with a smaller
number of iterations, potentially accepting a larger packfile
transfer, instead of going back one commit a time during common
ancestor discovery during the "git fetch" transaction.
* jt/fetch-negotiator-skipping:
negotiator/skipping: skip commits during fetch
"git send-email" when using in a batched mode that limits the
number of messages sent in a single SMTP session lost the contents
of the variable used to choose between tls/ssl, unable to send the
second and later batches, which has been fixed.
* jm/send-email-tls-auth-on-batch:
send-email: fix tls AUTH when sending batch
"git rebase" started exporting GIT_DIR environment variable and
exposing it to hook scripts when part of it got rewritten in C.
Instead of matching the old scripted Porcelains' behaviour,
compensate by also exporting GIT_WORK_TREE environment as well to
lessen the damage. This can harm existing hooks that want to
operate on different repository, but the current behaviour is
already broken for them anyway.
* bc/sequencer-export-work-tree-as-well:
sequencer: pass absolute GIT_WORK_TREE to exec commands
Tests to cover conflict cases that involve submodules have been
added for merge-recursive.
* en/t7405-recursive-submodule-conflicts:
t7405: verify 'merge --abort' works after submodule/path conflicts
t7405: add a directory/submodule conflict
t7405: add a file/submodule conflict
Tests to cover various conflicting cases have been added for
merge-recursive.
* en/t6036-merge-recursive-tests:
t6036: add a failed conflict detection case: regular files, different modes
t6036: add a failed conflict detection case with conflicting types
t6036: add a failed conflict detection case with submodule add/add
t6036: add a failed conflict detection case with submodule modify/modify
t6036: add a failed conflict detection case with symlink add/add
t6036: add a failed conflict detection case with symlink modify/modify
The recursive merge strategy did not properly ensure there was no
change between HEAD and the index before performing its operation,
which has been corrected.
* en/dirty-merge-fixes:
merge: fix misleading pre-merge check documentation
merge-recursive: enforce rule that index matches head before merging
t6044: add more testcases with staged changes before a merge is invoked
merge-recursive: fix assumption that head tree being merged is HEAD
merge-recursive: make sure when we say we abort that we actually abort
t6044: add a testcase for index matching head, when head doesn't match HEAD
t6044: verify that merges expected to abort actually abort
index_has_changes(): avoid assuming operating on the_index
read-cache.c: move index_has_changes() from merge.c
"git rebase --rebase-merges" mode now handles octopus merges as
well.
* js/rebase-merge-octopus:
rebase --rebase-merges: adjust man page for octopus support
rebase --rebase-merges: add support for octopus merges
merge: allow reading the merge commit message from a file
"git gc --auto" opens file descriptors for the packfiles before
spawning "git repack/prune", which would upset Windows that does
not want a process to work on a file that is open by another
process. The issue has been worked around.
* kg/gc-auto-windows-workaround:
gc --auto: release pack files before auto packing
For a large tree, the index needs to hold many cache entries
allocated on heap. These cache entries are now allocated out of a
dedicated memory pool to amortize malloc(3) overhead.
* jm/cache-entry-from-mem-pool:
block alloc: add validations around cache_entry lifecyle
block alloc: allocate cache entries from mem_pool
mem-pool: fill out functionality
mem-pool: add life cycle management functions
mem-pool: only search head block for available space
block alloc: add lifecycle APIs for cache_entry structs
read-cache: teach make_cache_entry to take object_id
read-cache: teach refresh_cache_entry to take istate
"git fetch" learned a new option "--negotiation-tip" to limit the
set of commits it tells the other end as "have", to reduce wasted
bandwidth and cycles, which would be helpful when the receiving
repository has a lot of refs that have little to do with the
history at the remote it is fetching from.
* jt/fetch-nego-tip:
fetch-pack: support negotiation tip whitelist
Various glitches in the heuristics of merge-recursive strategy have
been documented in new tests.
* en/t6042-insane-merge-rename-testcases:
t6042: add testcase covering long chains of rename conflicts
t6042: add testcase covering rename/rename(2to1)/delete/delete conflict
t6042: add testcase covering rename/add/delete conflict type
Parsing of -L[<N>][,[<M>]] parameters "git blame" and "git log"
take has been tweaked.
* is/parsing-line-range:
log: prevent error if line range ends past end of file
blame: prevent error if range ends past end of file
Code restructuring and a small fix to transport protocol v2 during
fetching.
* jt/fetch-pack-negotiator:
fetch-pack: introduce negotiator API
fetch-pack: move common check and marking together
fetch-pack: make negotiation-related vars local
fetch-pack: use ref adv. to prune "have" sent
fetch-pack: directly end negotiation if ACK ready
fetch-pack: clear marks before re-marking
fetch-pack: split up everything_local()
"git checkout" and "git worktree add" learned to honor
checkout.defaultRemote when auto-vivifying a local branch out of a
remote tracking branch in a repository with multiple remotes that
have tracking branches that share the same names.
* ab/checkout-default-remote:
checkout & worktree: introduce checkout.defaultRemote
checkout: add advice for ambiguous "checkout <branch>"
builtin/checkout.c: use "ret" variable for return
checkout: pass the "num_matches" up to callers
checkout.c: change "unique" member to "num_matches"
checkout.c: introduce an *_INIT macro
checkout.h: wrap the arguments to unique_tracking_name()
checkout tests: index should be clean after dwim checkout
"git diff --color-moved" feature has further been tweaked.
* sb/diff-color-move-more:
diff.c: offer config option to control ws handling in move detection
diff.c: add white space mode to move detection that allows indent changes
diff.c: factor advance_or_nullify out of mark_color_as_moved
diff.c: decouple white space treatment from move detection algorithm
diff.c: add a blocks mode for moved code detection
diff.c: adjust hash function signature to match hashmap expectation
diff.c: do not pass diff options as keydata to hashmap
t4015: avoid git as a pipe input
xdiff/xdiffi.c: remove unneeded function declarations
xdiff/xdiff.h: remove unused flags
"git fsck" learns to make sure the optional commit-graph file is in
a sane state.
* ds/commit-graph-fsck: (23 commits)
coccinelle: update commit.cocci
commit-graph: update design document
gc: automatically write commit-graph files
commit-graph: add '--reachable' option
commit-graph: use string-list API for input
fsck: verify commit-graph
commit-graph: verify contents match checksum
commit-graph: test for corrupted octopus edge
commit-graph: verify commit date
commit-graph: verify generation number
commit-graph: verify parent list
commit-graph: verify root tree OIDs
commit-graph: verify objects exist
commit-graph: verify corrupt OID fanout and lookup
commit-graph: verify required chunks are present
commit-graph: verify catches corrupt signature
commit-graph: add 'verify' subcommand
commit-graph: load a root tree from specific graph
commit: force commit to parse from object database
commit-graph: parse commit from chosen graph
...
Recent "security fix" to pay attention to contents of ".gitmodules"
while accepting "git push" was a bit overly strict than necessary,
which has been adjusted.
* jk/fsck-gitmodules-gently:
fsck: downgrade gitmodulesParse default to "info"
fsck: split ".gitmodules too large" error from parse failure
fsck: silence stderr when parsing .gitmodules
config: add options parameter to git_config_from_mem
config: add CONFIG_ERROR_SILENT handler
config: turn die_on_error into caller-facing enum
Conversion from uchar[40] to struct object_id continues.
* bc/object-id:
pretty: switch hard-coded constants to the_hash_algo
sha1-file: convert constants to uses of the_hash_algo
log-tree: switch GIT_SHA1_HEXSZ to the_hash_algo->hexsz
diff: switch GIT_SHA1_HEXSZ to use the_hash_algo
builtin/merge-recursive: make hash independent
builtin/merge: switch to use the_hash_algo
builtin/fmt-merge-msg: make hash independent
builtin/update-index: simplify parsing of cacheinfo
builtin/update-index: convert to using the_hash_algo
refs/files-backend: use the_hash_algo for writing refs
sha1-name: use the_hash_algo when parsing object names
strbuf: allocate space with GIT_MAX_HEXSZ
commit: express tree entry constants in terms of the_hash_algo
hex: switch to using the_hash_algo
tree-walk: replace hard-coded constants with the_hash_algo
cache: update object ID functions for the_hash_algo
Tests to cover more D/F conflict cases have been added for
merge-recursive.
* en/t6036-recursive-corner-cases:
t6036: fix broken && chain in sub-shell
t6036: add lots of detail for directory/file conflicts in recursive case
httpd tests saw occasional breakage due to the way its access log
gets inspected by the tests, which has been updated to make them
less flaky.
* sg/httpd-test-unflake:
t/lib-httpd: avoid occasional failures when checking access.log
t/lib-httpd: add the strip_access_log() helper function
t5541: clean up truncating access log
"git pull --rebase" on a corrupt HEAD caused a segfault. In
general we substitute an empty tree object when running the in-core
equivalent of the diff-index command, and the codepath has been
corrected to do so as well to fix this issue.
* jk/has-uncommitted-changes-fix:
has_uncommitted_changes(): fall back to empty tree
This character class, like many others in this script, matches
horizontal whitespace consisting of spaces and tabs, however, a few
extra, entirely harmless, spaces somehow slipped into the expression.
Removing them is purely a cosmetic fix.
While at it, re-indent three lines with a single TAB each which were
incorrectly indented with six spaces. Also, a purely cosmetic fix.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Honor core.commentchar when preparing the list of commits to replay
in "rebase -i".
* as/sequencer-customizable-comment-char:
sequencer: use configured comment character
Look for broken use of "VAR=VAL shell_func" in test scripts as part
of test-lint.
* es/test-lint-one-shot-export:
t/check-non-portable-shell: detect "FOO=bar shell_func"
t/check-non-portable-shell: make error messages more compact
t/check-non-portable-shell: stop being so polite
t6046/t9833: fix use of "VAR=VAL cmd" with a shell function
"git rev-parse ':/substring'" did not consider the history leading
only to HEAD when looking for a commit with the given substring,
when the HEAD is detached. This has been fixed.
* wc/find-commit-with-pattern-on-detached-head:
sha1-name.c: for ":/", find detached HEAD commits
"git reset --merge" (hence "git merge ---abort") and "git reset --hard"
had trouble working correctly in a sparsely checked out working
tree after a conflict, which has been corrected.
* mk/merge-in-sparse-checkout:
unpack-trees: do not fail reset because of unmerged skipped entry
Code clean-up.
* hs/push-cert-check-cleanup:
gpg-interface: make parse_gpg_output static and remove from interface header
builtin/receive-pack: use check_signature from gpg-interface
Handling of an empty range by "git cherry-pick" was inconsistent
depending on how the range ended up to be empty, which has been
corrected.
* jk/empty-pick-fix:
sequencer: don't say BUG on bogus input
sequencer: handle empty-set cases consistently
Partial clone support of "git clone" has been updated to correctly
validate the objects it receives from the other side. The server
side has been corrected to send objects that are directly
requested, even if they may match the filtering criteria (e.g. when
doing a "lazy blob" partial clone).
* jt/partial-clone-fsck-connectivity:
clone: check connectivity even if clone is partial
upload-pack: send refs' objects despite "filter"
The content-transfer-encoding of the message "git send-email" sends
out by default was 8bit, which can cause trouble when there is an
overlong line to bust RFC 5322/2822 limit. A new option 'auto' to
automatically switch to quoted-printable when there is such a line
in the payload has been introduced and is made the default.
* bc/send-email-auto-cte:
docs: correct RFC specifying email line length
send-email: automatically determine transfer-encoding
send-email: accept long lines with suitable transfer encoding
send-email: add an auto option for transfer encoding
The character display width table has been updated to match the
latest Unicode standard.
* bb/unicode-11-width:
unicode: update the width tables to Unicode 11
