Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes. In addition, use cut to filter out the object
IDs and verify only the information that we're really interested in.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow lines which start with either a 40- or 64-character hex object ID,
to allow for both SHA-1 and SHA-256.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One assertion in this test invokes git with core.abbrev set to "40".
Since we're expecting the full hash length, use test_oid to look up the
full hash length for the hash in use.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compute the length of an object ID instead of hard-coding 40-based
values.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the ZERO_OID variable to abbreviate the all-zeros object ID for
maintainability and to avoid depending on a specific size for the hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test to sanitize the diffs and strip out object IDs from
them, as it does for other object IDs, since we are not interested in
the particular values used.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use $ZERO_OID instead of hard-coding a fixed size all-zeros object ID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using cut with hard-coded hash sizes, use cut with fields, or
where that's not possible, sed with $OID_REGEX, so that the tests are
independent of hash size.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_oid instead of hard-coding algorithm-specific constants and
all-zero values.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using a specific invalid hard-coded object ID, look one
up from the translation table.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test contains hard-coded invalid object IDs. Make it hash size
independent by generating invalid object IDs using the translation
tables. Add a setup target to ensure the output of test_oid_init is
checked properly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this test, we want to produce several blobs whose first two hex
characters are "17", since we look at this object directory as a proxy
for how many loose objects there are before we need to GC. Use
test_oid_cache to specify strings that will hash to the right values
when turned into blobs.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard-coding a fixed length example object ID in the test,
compute one using the translation tables. Move a variable into the
setup block so that we can ensure the exit status of test_oid is
checked.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use $OID_REGEX instead of a hard-coded regular expression.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard-coding a constant 40, split the output of rev-list by
field.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea of the magic value "ac4f2ee" in this test is to make the
reworded commit `collide2` have the same shortened ID as the commit
`collide3`.
To port the same idea to the SHA-256 version of Git, we therefore need
another magic value that causes the same collision, but this time with
the SHA-256 version of the commit IDs.
In this patch, we add code guarded by `GIT_TEST_FIND_COLLIDER` to do
exactly that. Essentially, a large number of integers is appended to the
commit message "collide2" to find such a collision. To make it easier to
find such a collision, we reduce the number of digits to 4.
As the tests are no longer dependent on SHA-1, we also rename their
titles to talk about "commit IDs" instead of "SHA-1s".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When computing the fanout length, let's use test_oid to look up the
hexadecimal size of the hash in question instead of hard-coding a value.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use $ZERO_OID to make the test hash independent.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bloom filter code relies on reading object IDs using parse_oid_hex.
In order to make that work with an appropriate size, we need to have
initialized the repository's hash algorithm. Since the values we're
processing depend on the repository in use, let's set up the repository
when we run the test helper.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit fixes a couple of minor spelling mistakes inside
comments.
Signed-off-by: Steve Kemp <steve@steve.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typos introduced in commit a133737b80 ("doc: include --guide option
description for "git help"", 2013-04-02).
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_object_or_die() is passed an object ID and a name to show if the
object cannot be parsed. If the name is NULL then it shows the
hexadecimal object ID. Use that feature instead of preparing and
passing the hexadecimal representation to the function proactively.
That's shorter and a bit more efficient.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers which need it anymore. Any topics in flight will
need to be updated as they get merged in (but the compiler will make
that quite clear).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were a few mentions of argv_array in a non-code file which didn't
get picked up in the previous commits (note that even comments in code
files were already covered because of the mechanical conversion via
perl).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the remaining files, as the resulting diff is
reasonably sized.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts remaining files from the first half of the alphabet,
to keep the diff to a manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add '[abcdefghjkl]*'".
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the files in builtin/ to keep the diff to a
manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add builtin/". We'll deal
with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to eventually drop the use of the "argv_array" name in favor of
"strvec." Unlike most other uses of the name, this one is embedded in a
function name, so the definition and all of the callers need to be
updated at the same time.
We don't technically need to update the parameter types here (our
preprocessor compat macros make the two names interchangeable), but
let's do so to keep the site consistent for now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name "argv-array" isn't very good, because it describes what the
data type can be used for (program argument arrays), not what it
actually is (a dynamically-growing string array that maintains a
NULL-terminator invariant). This leads to people being hesitant to use
it for other cases where it would actually be a good fit. The existing
name is also clunky to use. It's overly long, and the name often leads
to saying things like "argv.argv" (i.e., the field names overlap with
variable names, since they're describing the use, not the type). Let's
give it a more neutral name.
I settled on "strvec" because "vector" is the name for a dynamic array
type in many programming languages. "strarray" would work, too, but it's
longer and a bit more awkward to say (and don't we all say these things
in our mind as we type them?).
A more extreme direction would be a generic data structure which stores
a NULL-terminated of _any_ type. That would be easy to do with void
pointers, but we'd lose some type safety for the existing cases. Plus it
raises questions about memory allocation and ownership. So I limited
myself here to changing names only, and not semantics. If we do find a
use for that more generic data type, we could perhaps implement it at a
lower level and then provide type-safe wrappers around it for strings.
But that can come later.
This patch does the minimum to convert the struct and function names in
the header and implementation, leaving a few things for follow-on
patches:
- files retain their original names for now
- struct field names are retained for now
- there's a preprocessor compat layer that lets most users remain the
same for now. The exception is headers which made a manual forward
declaration of the struct. I've converted them (and their dependent
function declarations) here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On most 64-bit platforms, "int" is significantly smaller than a size_t,
which could lead to integer overflow and under-allocation of the array.
It's probably impossible to trigger in practice, as it would imply on
the order of 2^32 individual allocations. Even if was possible to grow
an array in that way (and we typically only use it for sets of strings,
like command line options), each allocation needs a pointer, malloc
overhead, etc. You'd quite likely run out of RAM before succeeding in
such an overflow.
But all that hand-waving aside, it's easy enough to use the correct
type, so let's do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "reference transaction" hook was introduced in commit 6754159767
(refs: implement reference transaction hook, 2020-06-19). The name of
the hook is declared as "reference-transaction" in "refs.c" and
testcases, but the name declared in "githooks.txt" is different.
Signed-off-by: Bojun Chen <bojun.cbj@alibaba-inc.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In our test suite, when 'git p4' invokes a Git command as a
subprocesses, then it should run the 'git' binary we are testing.
Unfortunately, this is not the case in the 'linux-clang' and
'linux-gcc' jobs on Travis CI, where 'git p4' runs the system
'/usr/bin/git' instead.
Travis CI's default Linux image includes 'pyenv', and all Python
invocations that involve PATH lookup go through 'pyenv', e.g. our
'PYTHON_PATH=$(which python3)' sets '/opt/pyenv/shims/python3' as
PYTHON_PATH, which in turn will invoke '/usr/bin/python3'. Alas, the
'pyenv' version included in this image is buggy, and prepends the
directory containing the Python binary to PATH even if that is a
system directory already in PATH near the end. Consequently, 'git p4'
in those jobs ends up with its PATH starting with '/usr/bin', and then
runs '/usr/bin/git'.
So use the absolute paths '/usr/bin/python{2,3}' explicitly when
setting PYTHON_PATH in those Linux jobs to avoid the PATH lookup and
thus the bogus 'pyenv' from interfering with our 'git p4' tests.
Don't bother with special-casing Travis CI: while this issue doesn't
affect the corresponding Linux jobs on GitHub Actions, both CI systems
use Ubuntu LTS-based images, so we can safely rely on these Python
paths.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index-pack documentation explicitly states that the pack
name is derived from the sorted list of object names, but
since commit 1190a1acf8 ("pack-objects: name pack files
after trailer hash") that isn't true anymore.
Be less explicit in the docs as to what the exact output is,
and just say that it's whatever goes into the pack name.
Also update a comment on write_idx_file() since it no longer
modifies the sha1 variable (it's const now anyway), as noted
by Junio.
Fixes: 1190a1acf8 ("pack-objects: name pack files after trailer hash")
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pretend_object_file() is invoked with an object that does not exist
(as is the typical case), there is no need to fetch anything from the
promisor remote, because the caller already knows what the object is
supposed to contain. Therefore, suppress the fetch. (The
OBJECT_INFO_QUICK flag is added for the same reason.)
This was noticed at $DAYJOB when "blame" was run on a file that had
uncommitted modifications.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
