"git merge" learned to selectively omit " into <branch>" at the end
of the title of default merge message with merge.suppressDest
configuration.
* jc/fmt-merge-msg-suppress-destination:
fmt-merge-msg: allow merge destination to be omitted again
Revert "fmt-merge-msg: stop treating `master` specially"
In order for "git-worktree list" to present consistent results,
get_main_worktree() performs manual normalization on the repository
path (returned by get_common_dir()) after passing it through
strbuf_add_absolute_path(). In particular, it cleans up the path for
three distinct cases when the current working directory is (1) the main
worktree, (2) the .git/ subdirectory, or (3) a bare repository.
The need for such special-cases is a direct consequence of employing
strbuf_add_absolute_path() which, for the sake of efficiency, doesn't
bother normalizing the path (such as folding out redundant path
components) after making it absolute. Lack of normalization is not
typically a problem since redundant path elements make no difference
when working with paths at the filesystem level. However, when preparing
paths for presentation, possible redundant path components make it
difficult to ensure consistency.
Eliminate the need for these special cases by instead making the path
absolute via strbuf_add_real_path() which normalizes the path for us.
Once normalized, the only case we need to handle manually is converting
it to the path of the main worktree by stripping the "/.git" suffix.
This stripping of the "/.git" suffix is a regular idiom in
worktree-related code; for instance, it is employed by
get_linked_worktree(), as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The content of .git/worktrees/<id>/gitdir must be a path of the form
"/path/to/worktree/.git". Any other content would be indicative of a
corrupt "gitdir" file. To determine the path of the worktree itself one
merely strips the "/.git" suffix, and this is indeed how the worktree
path was determined from inception.
However, 5193490442 (worktree: add a function to get worktree details,
2015-10-08) extended the path manipulation in a mysterious way. If it is
unable to strip "/.git" from the path, then it instead reports the
current working directory as the linked worktree's path:
if (!strbuf_strip_suffix(&worktree_path, "/.git")) {
strbuf_reset(&worktree_path);
strbuf_add_absolute_path(&worktree_path, ".");
strbuf_strip_suffix(&worktree_path, "/.");
}
This logic is clearly bogus; it can never be generally correct behavior.
It materialized out of thin air in 5193490442 with neither explanation
nor tests to illustrate a case in which it would be desirable.
It's possible that this logic was introduced to somehow deal with a
corrupt "gitdir" file, so that it returns _some_ sort of meaningful
value, but returning the current working directory is not helpful. In
fact, it is quite misleading (except in the one specific case when the
current directory is the worktree whose "gitdir" entry is corrupt).
Moreover, reporting the corrupt value to the user, rather than fibbing
about it and hiding it outright, is more helpful since it may aid in
diagnosing the problem.
Therefore, drop this bogus path munging and restore the logic to the
original behavior of merely stripping "/.git".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code has been unused since fa099d2322 (worktree.c: kill parse_ref()
in favor of refs_resolve_ref_unsafe(), 2017-04-24), so drop it.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The content of this strbuf is unconditionally detached several lines
before the strbuf_release() and the strbuf is never touched again after
that point.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b6839fda68 (ref-filter: add support for %(contents:size), 2020-07-16)
added a new format for ref-filter, and added a function to generate
tests for this new feature in t6300. Unfortunately, it tries to run
`test_expect_sucess' instead of `test_expect_success', and writes
$expect to `expected', but tries to read `expect'. Those two issues
were probably unnoticed because the script only printed errors, but did
not crash. This fixes these issues.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
523fa69c (reflog: cleanse messages in the refs.c layer, 2020-07-10)
centralized reflog normalizaton. However, the normalizaton added a
leading "\t" to the message. This is an artifact of the reflog
storage format in the files backend, so it should be added there.
Routines that parse back the reflog (such as grab_nth_branch_switch)
expect the "\t" to not be in the message, so without this fix, git
with reftable cannot process the "@{-1}" syntax.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CI fixup---tests of Python scripts didn't use the version of Git
that is being tested.
* sg/ci-git-path-fix-with-pyenv:
ci: use absolute PYTHON_PATH in the Linux jobs
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mv src dst", when src is an unmerged path, errored out
correctly but with an incorrect error message to claim that src is
not tracked, which has been clarified.
* ct/mv-unmerged-path-error:
git-mv: improve error message for conflicted file
Pushing a ref whose name contains non-ASCII character with the
"--force-with-lease" option did not work over smart HTTP protocol,
which has been corrected.
* bc/push-cas-cquoted-refname:
remote-curl: make --force-with-lease work with non-ASCII ref names
"git for-each-ref --format=<>" learned %(contents:size).
* cc/pretty-contents-size:
ref-filter: add support for %(contents:size)
t6300: test refs pointing to tree and blob
Documentation: clarify %(contents:XXXX) doc
Fetching from a lazily cloned repository resulted at the server
side in attempts to lazy fetch objects that the client side has,
many of which will not be available from the third-party anyway.
* jt/avoid-lazy-fetching-upon-have-check:
upload-pack: do not lazy-fetch "have" objects
Dev support to limit the use of test_must_fail to only git commands.
* dl/test-must-fail-fixes-6:
test-lib-functions: restrict test_must_fail usage
t9400: don't use test_must_fail with cvs
t9834: remove use of `test_might_fail p4`
t7107: don't use test_must_fail()
t5324: reorder `run_with_limited_open_files test_might_fail`
t3701: stop using `env` in force_color()
With the base fix to 2.27 regresion, any new extensions in a v0
repository would still be silently honored, which is not quite
right. Instead, complain and die loudly.
* jk/reject-newer-extensions-in-v0:
verify_repository_format(): complain about new extensions in v0 repo
Preliminary clean-up of the refs API in preparation for adding a
new refs backend "reftable".
* hn/reftable:
reflog: cleanse messages in the refs.c layer
bisect: treat BISECT_HEAD as a pseudo ref
t3432: use git-reflog to inspect the reflog for HEAD
lib-t6000.sh: write tag using git-update-ref
"git clone --separate-git-dir=$elsewhere" used to stomp on the
contents of the existing directory $elsewhere, which has been
taught to fail when $elsewhere is not an empty directory.
* bw/fail-cloning-into-non-empty:
git clone: don't clone into non-empty directory
"git help log" has been enhanced by sharing more material from the
documentation for the underlying "git rev-list" command.
* pb/log-rev-list-doc:
git-log.txt: include rev-list-description.txt
git-rev-list.txt: move description to separate file
git-rev-list.txt: tweak wording in set operations
git-rev-list.txt: fix Asciidoc syntax
revisions.txt: describe 'rev1 rev2 ...' meaning for ranges
git-log.txt: add links to 'rev-list' and 'diff' docs
The test framework has been updated so that most tests will run
with predictable (artificial) timestamps.
* jk/tests-timestamp-fix:
t9100: stop depending on commit timestamps
test-lib: set deterministic default author/committer date
t9100: explicitly unset GIT_COMMITTER_DATE
t5539: make timestamp requirements more explicit
t9700: loosen ident timezone regex
t6000: use test_tick consistently
Updates to the changed-paths bloom filter.
* ds/commit-graph-bloom-updates:
commit-graph: check all leading directories in changed path Bloom filters
revision: empty pathspecs should not use Bloom filters
revision.c: fix whitespace
commit-graph: check chunk sizes after writing
commit-graph: simplify chunk writes into loop
commit-graph: unify the signatures of all write_graph_chunk_*() functions
commit-graph: persist existence of changed-paths
bloom: fix logic in get_bloom_filter()
commit-graph: change test to die on parse, not load
commit-graph: place bloom_settings in context
The changed-path Bloom filter is improved using ideas from an
independent implementation.
* sg/commit-graph-cleanups:
commit-graph: simplify write_commit_graph_file() #2
commit-graph: simplify write_commit_graph_file() #1
commit-graph: simplify parse_commit_graph() #2
commit-graph: simplify parse_commit_graph() #1
commit-graph: clean up #includes
diff.h: drop diff_tree_oid() & friends' return value
commit-slab: add a function to deep free entries on the slab
commit-graph-format.txt: all multi-byte numbers are in network byte order
commit-graph: fix parsing the Chunk Lookup table
tree-walk.c: don't match submodule entries for 'submod/anything'
In Git 2.28, we stopped special casing 'master' when producing the
default merge message by just removing the code to squelch "into
'master'" at the end of the message.
Introduce multi-valued merge.suppressDest configuration variable
that gives a set of globs to match against the name of the branch
into which the merge is being made, to let users specify for which
branch fmt-merge-msg's output should be shortened. When it is not
set, 'master' is used as the sole value of the variable by default.
The above move mostly reverts the pre-2.28 default in repositories
that have no relevant configuration.
Add a few tests to protect the behaviour with the new configuration
variable from future regression.
Helped-by: Linus Torvalds <torvalds@linux-foundation.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 489947cee5, which
stopped treating merges into the 'master' branch as special when
preparing the default merge message. As the goal was not to have
any single branch designated as special, it solved it by leaving the
"into <branchname>" at the end of the title of the default merge
message for any and all branches. An obvious and easy alternative
to treat everybody equally could have been to remove it for every
branch, but that involves loss of information.
We'll introduce a new mechanism to let end-users specify merges into
which branches would omit the "into <branchname>" from the title of
the default merge message, and make the mechanism, when unconfigured,
treat the traditional 'master' special again, so all the changes to
the tests we made earlier will become unnecessary, as these tests
will be run without configuring the said new mechanism.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we call test_oid_init in the setup for all test scripts,
there's no point in calling it individually. Remove all of the places
where we've done so to help keep tests tidy.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the extensions.objectFormat config setting. Warn users not to
modify it themselves.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have Git supporting SHA-256, we'd like to make sure that we
don't regress that state. Unfortunately, it's easy to do so, so to
help, let's add code to run one of our CI jobs with SHA-256 as the
default hash. This will help us detect any problems that may occur.
We pick the linux-clang job because it's relatively fast and the
linux-gcc job already runs the testsuite twice. We want our tests to
run as fast as possible, so we wouldn't want to add a third run to the
linux-gcc job. To make sure we properly exercise the code, let's run
the tests in the default mode (SHA-1) first and then run a second time
with SHA-256. We explicitly specify SHA-1 for the first run so that if
we change the default in the future, we make sure to test both cases.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the SHA1 prerequisite depends on the output of git
hash-object. However, in order for that to produce sane behavior, we
must be in a repository. If we are not, the default will remain SHA-1,
and we'll produce wrong results if we're using SHA-256 for the testsuite
but the test assertion starts when we're not in a repository.
Check the environment variable we use for this purpose, leaving it to
default to SHA-1 if none is specified.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To allow developers to run the testsuite with a different algorithm than
the default, provide an environment variable, GIT_TEST_DEFAULT_HASH, to
specify the algorithm to use. Compute the fixed constants using
test_oid. Move the constant initialization down below the point where
test-lib-functions.sh is loaded so the functions are defined.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some tests, we have data files which are written with a particular
hash algorithm. Instead of keeping two copies of the test files, we can
keep one, and translate the value on the fly.
In order to do so, we'll need to read both the source algorithm and the
current algorithm, so add an optional flag to the test_oid helper that
lets us look up a value for a specified hash algorithm. This should
not cause any conflicts with existing tests, since key arguments to
test_oid are allowed to contains only shell identifier characters.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have a complete SHA-256 implementation in Git, let's enable
it so people can use it. Remove the ENABLE_SHA256 define constant
everywhere it's used. Add tests for initializing a repository with
SHA-256.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The transition plan specifies extensions.objectFormat as the indication
that we're using a given hash in a certain repo. Read this as one of
the extensions we support. If the user has specified an invalid value,
fail.
Ensure that we reject the extension if the repository format version is
0.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we detect the hash algorithm in use by the length of the
object ID. This is inelegant and prevents us from using a different
hash algorithm that is also 256 bits in length.
Since we cannot extend the v2 format in a backward-compatible way, let's
add a v3 format, which is identical, except for the addition of
capabilities, which are prefixed by an at sign. We add "object-format"
as the only capability and reject unknown capabilities, since we do not
have a network connection and therefore cannot negotiate with the other
side.
For compatibility, default to the v2 format for SHA-1 and require v3
for SHA-256.
In t5510, always use format v3 so we can be sure we produce consistent
results across hash algorithms. Since head -n N lists the top N lines
instead of the Nth line, let's run our output through sed to normalize
it and compare it against a fixed value, which will make sure we get
exactly what we're expecting.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recently added test in t5702 started using git verify-pack outside of
a repository. While this poses no problems with SHA-1, with SHA-256 we
implicitly rely on the setup of the repository to initialize our hash
algorithm settings.
Since we're not in a repository here, we need to provide git verify-pack
help to set things up properly. git index-pack already knows an
--object-format option, so let's accept one as well and pass it down to
our git index-pack invocation. Since we're now dynamically adjusting
the elements in argv, let's switch to using struct argv_array to manage
them. Finally, let's make t5702 pass the proper argument on down to its
git verify-pack caller.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In dd4b732df7 ("upload-pack: send part of packfile response as uri",
2020-06-10), the git http-fetch code learned how to take ac --packfile
option. This option takes an argument, which is the name of a packfile
hash, and parses it using parse_oid_hex. It does so before calling
setup_git_directory.
However, in a SHA-256 repository this fails to work, since we have not
set the hash algorithm in use and parse_oid_hex fails as a consequence.
To ensure that we can parse packfile hashes of the right length, let's
set up the git directory before we start parsing arguments.
Since we still want to allow the invocation of -h to print the help when
we're not in a repository, gracefully handle us being outside of one and
produce an error after argument parsing has finished.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests try to check that we behave properly if we encounter a
repository with version 0 but an extension. This is a laudable goal,
but the test cannot work with SHA-256, since SHA-256 repositories always
have an existing extension and are never version 0.
Add a SHA1 prerequisite to these tests.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test needs multiple object IDs that have the same first byte.
Update the pack test code to generate a suitable packed value for
SHA-256. Update the test to use this value when using SHA-256.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Perl test script for t9700 was matching on exactly 40 hex
characters. With SHA-256, we'll have 64 hex-character object IDs.
Create a variable with a regex which matches exactly 40 or 64 hex
characters and use that to match the output. Note that both of the uses
of this can be anchored, which makes the code simpler, so do that as
well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use a hash algorithm other than SHA-1, it's important to
preserve the hash-related values in the config file, but this test
overwrites the config file with a new one. Ensure we copy these values
properly from the old config to the new one so that the repository can
be read if it's using SHA-256.
Note that if there is no extensions.objectFormat value set, git config
will return unsuccessfully if we try to read it; since this is not an
error for us, use test_might_fail.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test checks for several commit object sizes to verify that objects
are encoded as expected. However, the size of a commit object differs
between SHA-1 and SHA-256, since each contains a hex representation of
the tree's object ID. Since these are root commits, compute the size of
each commit by using a constant plus the size of a single hex object ID.
In addition, use $ZERO_OID instead of a hard-coded object ID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using a hard-coded all-zeros object ID, use $ZERO_OID.
Compute the length of the object IDs in use and use this instead of
hard-coding the constant 40.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
