Fix a regression in 8c32856133 (blame: document --color-* options,
2021-10-08), which added an extra newline before the "+" syntax.
The "Documentation/doc-diff HEAD~ HEAD" output with this applied is:
[...]
@@ -1815,13 +1815,13 @@ CONFIGURATION FILE
specified colors if the line was introduced before the given
timestamp, overwriting older timestamped colors.
- + Instead of an absolute timestamp relative timestamps work as well,
- e.g. 2.weeks.ago is valid to address anything older than 2 weeks.
+ Instead of an absolute timestamp relative timestamps work as well,
+ e.g. 2.weeks.ago is valid to address anything older than 2 weeks.
- + It defaults to blue,12 month ago,white,1 month ago,red, which colors
- everything older than one year blue, recent changes between one month
- and one year old are kept white, and lines introduced within the last
- month are colored red.
+ It defaults to blue,12 month ago,white,1 month ago,red, which
+ colors everything older than one year blue, recent changes between
+ one month and one year old are kept white, and lines introduced
+ within the last month are colored red.
color.blame.repeatedLines
Use the specified color to colorize line annotations for git blame
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit cdc2d5f11f (builtin/blame: dim uninteresting metadata lines,
2018-04-23) and 25d5f52901 (builtin/blame: highlight recently changed
lines, 2018-04-23) introduce --color-lines and --color-by-age options to
git blame, respectively. While both options are mentioned in usage help,
they aren't documented in git-blame(1). Document them.
Co-authored-by: Dr. Matthias St. Pierre <m.st.pierre@ncp-e.com>
Signed-off-by: Dr. Matthias St. Pierre <m.st.pierre@ncp-e.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While there is descriptions for porcelain and incremental output
formats, the default format isn't described. Describe that format for
the sake of completeness.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.22:
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
* maint-2.21:
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
* maint-2.20:
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
* maint-2.19:
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
* maint-2.18:
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
* maint-2.17:
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
We really want to avoid relying on stale information.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the previous commit, we intercepted calls to `rmdir()` to invalidate
the lstat cache in the successful case, so that the lstat cache could
not have the idea that a directory exists where there is none.
The same situation can arise, of course, when a separate process is
spawned (most notably, this is the case in `submodule_move_head()`).
Obviously, we cannot know whether a directory was removed in that
process, therefore we must invalidate the lstat cache afterwards.
Note: in contrast to `lstat_cache_aware_rmdir()`, we invalidate the
lstat cache even in case of an error: the process might have removed a
directory and still have failed afterwards.
Co-authored-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Before checking out a file, we have to confirm that all of its leading
components are real existing directories. And to reduce the number of
lstat() calls in this process, we cache the last leading path known to
contain only directories. However, when a path collision occurs (e.g.
when checking out case-sensitive files in case-insensitive file
systems), a cached path might have its file type changed on disk,
leaving the cache on an invalid state. Normally, this doesn't bring
any bad consequences as we usually check out files in index order, and
therefore, by the time the cached path becomes outdated, we no longer
need it anyway (because all files in that directory would have already
been written).
But, there are some users of the checkout machinery that do not always
follow the index order. In particular: checkout-index writes the paths
in the same order that they appear on the CLI (or stdin); and the
delayed checkout feature -- used when a long-running filter process
replies with "status=delayed" -- postpones the checkout of some entries,
thus modifying the checkout order.
When we have to check out an out-of-order entry and the lstat() cache is
invalid (due to a previous path collision), checkout_entry() may end up
using the invalid data and thrusting that the leading components are
real directories when, in reality, they are not. In the best case
scenario, where the directory was replaced by a regular file, the user
will get an error: "fatal: unable to create file 'foo/bar': Not a
directory". But if the directory was replaced by a symlink, checkout
could actually end up following the symlink and writing the file at a
wrong place, even outside the repository. Since delayed checkout is
affected by this bug, it could be used by an attacker to write
arbitrary files during the clone of a maliciously crafted repository.
Some candidate solutions considered were to disable the lstat() cache
during unordered checkouts or sort the entries before passing them to
the checkout machinery. But both ideas include some performance penalty
and they don't future-proof the code against new unordered use cases.
Instead, we now manually reset the lstat cache whenever we successfully
remove a directory. Note: We are not even checking whether the directory
was the same as the lstat cache points to because we might face a
scenario where the paths refer to the same location but differ due to
case folding, precomposed UTF-8 issues, or the presence of `..`
components in the path. Two regression tests, with case-collisions and
utf8-collisions, are also added for both checkout-index and delayed
checkout.
Note: to make the previously mentioned clone attack unfeasible, it would
be sufficient to reset the lstat cache only after the remove_subtree()
call inside checkout_entry(). This is the place where we would remove a
directory whose path collides with the path of another entry that we are
currently trying to check out (possibly a symlink). However, in the
interest of a thorough fix that does not leave Git open to
similar-but-not-identical attack vectors, we decided to intercept
all `rmdir()` calls in one fell swoop.
This addresses CVE-2021-21300.
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
GitHub Actions is transitioning workflow steps that run on
'ubuntu-latest' from 18.04 to 20.04 [1].
This works fine in all steps except the static-analysis one, since
Coccinelle isn't available on Ubuntu focal (it is only available in the
universe suite).
Until Coccinelle can be installed from 20.04's main suite, pin the
static-analysis build to run on 18.04, where it can be installed by
default.
[1]: https://github.com/actions/virtual-environments/issues/1816
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our setting of GitHub CI test jobs were a bit too eager to give up
once there is even one failure found. Tweak the knob to allow
other jobs keep running even when we see a failure, so that we can
find more failures in a single run.
* pb/ci-matrix-wo-shortcut:
ci: do not cancel all jobs of a matrix if one fails
The implementation of "git branch --sort" wrt the detached HEAD
display has always been hacky, which has been cleaned up.
* ab/branch-sort:
branch: show "HEAD detached" first under reverse sort
branch: sort detached HEAD based on a flag
ref-filter: move ref_sorting flags to a bitfield
ref-filter: move "cmp_fn" assignment into "else if" arm
ref-filter: add braces to if/else if/else chain
branch tests: add to --sort tests
branch: change "--local" to "--list" in comment
Code clean-up.
* ma/t1300-cleanup:
t1300: don't needlessly work with `core.foo` configs
t1300: remove duplicate test for `--file no-such-file`
t1300: remove duplicate test for `--file ../foo`
A 3-year old test that was not testing anything useful has been
corrected.
* fc/t6030-bisect-reset-removes-auxiliary-files:
test: bisect-porcelain: fix location of files
