Don't reset the strbufs l2 and l3 before use as if they were static, but
release them at the end instead.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using for_each_ref_in() with a full refname has always been
a questionable practice, but it became an error with
b9c8e7f2fb (prefix_ref_iterator: don't trim too much,
2017-05-22), making "git rev-parse --bisect" pretty reliably
show a BUG.
Commit 03df567fbf (for_each_bisect_ref(): don't trim
refnames, 2017-06-18) fixed this case for revision.c, but
rev-parse handles this option on its own. We can use the
same solution here (and piggy-back on its test).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We read the tree objects with fill_tree_descriptor(), but
never actually free the resulting buffers, causing a memory
leak. This isn't a huge deal because we call this code at
most twice per program invocation. But it does potentially
double our heap usage if you have large root trees. Let's
free the trees before returning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on whether we're in --keep mode, git-reset may
feed one or two trees to unpack_trees(). We start a counter
at "1" and then increment it to "2" only for the two-tree
case. But that means we must always subtract one to find the
correct array slot to fill with each descriptor.
Instead, let's start at "0" and just increment our counter
after adding each tree. This skips the extra subtraction,
and will make things much easier when we start to actually
free our tree buffers.
While we're at it, let's make the first allocation use the
slot at "desc + nr", too, even though we know "nr" is 0 at
that point. It makes the two fill_tree_descriptor() calls
consistent (always "desc + nr", followed by always
incrementing "nr").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generate filenames for the user_config ("~/.gitconfig")
and the xdg config ("$XDG_CONFIG_HOME/git/config") and then
decide which to use by looking at the filesystem. But after
selecting one, the unused string is just leaked.
This is a tiny leak, but it creates noise in leak-checker
output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fail to add the cache entry to the index, we end up
just leaking the struct. We should follow the pattern of the
early-return above and free it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After run_diff_files, we throw away the rev_info struct,
including the pathspec that we copied into it, leaking the
memory. this is probably not a big deal in practice. We
usually only run this once per process, and the leak is
proportional to the pathspec list we're already holding in
memory.
But it's still a leak, and it pollutes leak-checker output,
making it harder to find important leaks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that it's safe to declare a "struct lock_file" on the
stack, we can do so (and avoid an intentional leak). These
leaks were found by running t0000 and t0001 under valgrind
(though certainly other similar leaks exist and just don't
happen to be exercised by those tests).
Initializing the lock_file's inner tempfile with NULL is not
strictly necessary in these cases, but it's a good practice
to model. It means that if we were to call a function like
rollback_lock_file() on a lock that was never taken in the
first place, it becomes a quiet noop (rather than undefined
behavior).
Likewise, it's always safe to rollback_lock_file() on a file
that has already been committed or deleted, since that
operation is a noop on an inactive lockfile (and that's why
the case in config.c can drop the "if (lock)" check as we
move away from using a pointer).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit taught the tempfile code to give up
ownership over tempfiles that have been renamed or deleted.
That makes it possible to use a stack variable like this:
struct tempfile t;
create_tempfile(&t, ...);
...
if (!err)
rename_tempfile(&t, ...);
else
delete_tempfile(&t);
But doing it this way has a high potential for creating
memory errors. The tempfile we pass to create_tempfile()
ends up on a global linked list, and it's not safe for it to
go out of scope until we've called one of those two
deactivation functions.
Imagine that we add an early return from the function that
forgets to call delete_tempfile(). With a static or heap
tempfile variable, the worst case is that the tempfile hangs
around until the program exits (and some functions like
setup_shallow_temporary rely on this intentionally, creating
a tempfile and then leaving it for later cleanup).
But with a stack variable as above, this is a serious memory
error: the variable goes out of scope and may be filled with
garbage by the time the tempfile code looks at it. Let's
see if we can make it harder to get this wrong.
Since many callers need to allocate arbitrary numbers of
tempfiles, we can't rely on static storage as a general
solution. So we need to turn to the heap. We could just ask
all callers to pass us a heap variable, but that puts the
burden on them to call free() at the right time.
Instead, let's have the tempfile code handle the heap
allocation _and_ the deallocation (when the tempfile is
deactivated and removed from the list).
This changes the return value of all of the creation
functions. For the cleanup functions (delete and rename),
we'll add one extra bit of safety: instead of taking a
tempfile pointer, we'll take a pointer-to-pointer and set it
to NULL after freeing the object. This makes it safe to
double-call functions like delete_tempfile(), as the second
call treats the NULL input as a noop. Several callsites
follow this pattern.
The resulting patch does have a fair bit of noise, as each
caller needs to be converted to handle:
1. Storing a pointer instead of the struct itself.
2. Passing the pointer instead of taking the struct
address.
3. Handling a "struct tempfile *" return instead of a file
descriptor.
We could play games to make this less noisy. For example, by
defining the tempfile like this:
struct tempfile {
struct heap_allocated_part_of_tempfile {
int fd;
...etc
} *actual_data;
}
Callers would continue to have a "struct tempfile", and it
would be "active" only when the inner pointer was non-NULL.
But that just makes things more awkward in the long run.
There aren't that many callers, so we can simply bite
the bullet and adjust all of them. And the compiler makes it
easy for us to find them all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from uchar[20] to struct object_id continues; this is to
ensure that we do not assume sizeof(struct object_id) is the same
as the length of SHA-1 hash (or length of longest hash we support).
* po/read-graft-line:
commit: rewrite read_graft_line
commit: allocate array using object_id size
commit: replace the raw buffer with strbuf in read_graft_line
sha1_file: fix definition of null_sha1
"branch --set-upstream" that has been deprecated in Git 1.8 has
finally been retired.
* ks/branch-set-upstream:
branch: quote branch/ref names to improve readability
builtin/branch: stop supporting the "--set-upstream" option
t3200: cleanup cruft of a test
Earlier, dddbad728c ("timestamp_t: a new data type for timestamps",
2017-04-26) changed several types to timestamp_t.
5589e87fd8 ("name-rev: change a "long" variable to timestamp_t",
2017-05-20) cleaned up a missed variable, but both missed a _MAX
constant.
Change the remaining constant to the one appropriate for the current
type
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Killing "git merge --edit" before the editor returns control left
the repository in a state with MERGE_MSG but without MERGE_HEAD,
which incorrectly tells the subsequent "git commit" that there was
a squash merge in progress. This has been fixed.
* mg/killed-merge:
merge: save merge state earlier
merge: split write_merge_state in two
merge: clarify call chain
Documentation/git-merge: explain --continue
Code clean-up to avoid mixing values read from the .gitmodules file
and values read from the .git/config file.
* bw/submodule-config-cleanup:
submodule: remove gitmodules_config
unpack-trees: improve loading of .gitmodules
submodule-config: lazy-load a repository's .gitmodules file
submodule-config: move submodule-config functions to submodule-config.c
submodule-config: remove support for overlaying repository config
diff: stop allowing diff to have submodules configured in .git/config
submodule: remove submodule_config callback routine
unpack-trees: don't respect submodule.update
submodule: don't rely on overlayed config when setting diffopts
fetch: don't overlay config with submodule-config
submodule--helper: don't overlay config in update-clone
submodule--helper: don't overlay config in remote_submodule_branch
add, reset: ensure submodules can be added or reset
submodule: don't use submodule_from_name
t7411: check configuration parsing errors
"git interpret-trailers" has been taught a "--parse" and a few
other options to make it easier for scripts to grab existing
trailer lines from a commit log message.
* jk/trailers-parse:
doc/interpret-trailers: fix "the this" typo
pretty: support normalization options for %(trailers)
t4205: refactor %(trailers) tests
pretty: move trailer formatting to trailer.c
interpret-trailers: add --parse convenience option
interpret-trailers: add an option to unfold values
interpret-trailers: add an option to show only existing trailers
interpret-trailers: add an option to show only the trailers
trailer: put process_trailers() options into a struct
"git interpret-trailers" learned to take the trailer specifications
from the command line that overrides the configured values.
* pb/trailers-from-command-line:
interpret-trailers: fix documentation typo
interpret-trailers: add options for actions
trailers: introduce struct new_trailer_item
trailers: export action enums and corresponding lookup functions
The function close_pack_fd() needs to be temporarily made global. Its
scope will be restored to static in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
alloc_packed_git() in packfile.c is duplicated from sha1_file.c. In a
subsequent commit, alloc_packed_git() will be removed from sha1_file.c.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, sha1_file.c and cache.h contain many functions, both related
to and unrelated to packfiles. This makes both files very large and
causes an unclear separation of concerns.
Create a new file, packfile.c, to hold all packfile-related functions
currently in sha1_file.c. It has a corresponding header packfile.h.
In this commit, the pack name-related functions are moved. Subsequent
commits will move the other functions.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup.
* jt/subprocess-handshake:
sub-process: refactor handshake to common function
Documentation: migrate sub-process docs to header
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
Code clean-up.
* rs/move-array:
ls-files: don't try to prune an empty index
apply: use COPY_ARRAY and MOVE_ARRAY in update_image()
use MOVE_ARRAY
add MOVE_ARRAY
"git commit" when seeing an totally empty message said "you did not
edit the message", which is clearly wrong. The message has been
corrected.
* ks/commit-abort-on-empty-message-fix:
commit: check for empty message before the check for untouched template
Numerous bugs in walking of reflogs via "log -g" and friends have
been fixed.
* jk/reflog-walk:
reflog-walk: apply --since/--until to reflog dates
reflog-walk: stop using fake parents
rev-list: check reflog_info before showing usage
get_revision_1(): replace do-while with an early return
log: do not free parents when walking reflog
log: clarify comment about reflog cycles
revision: disallow reflog walking with revs->limited
t1414: document some reflog-walk oddities
"%C(color name)" in the pretty print format always produced ANSI
color escape codes, which was an early design mistake. They now
honor the configuration (e.g. "color.ui = never") and also tty-ness
of the output medium.
* jk/ref-filter-colors:
ref-filter: consult want_color() before emitting colors
pretty: respect color settings for %C placeholders
rev-list: pass diffopt->use_colors through to pretty-print
for-each-ref: load config earlier
color: check color.ui in git_default_config()
ref-filter: pass ref_format struct to atom parsers
ref-filter: factor out the parsing of sorting atoms
ref-filter: make parse_ref_filter_atom a private function
ref-filter: provide a function for parsing sort options
ref-filter: move need_color_reset_at_eol into ref_format
ref-filter: abstract ref format into its own struct
ref-filter: simplify automatic color reset
t: use test_decode_color rather than literal ANSI codes
docs/for-each-ref: update pointer to color syntax
check return value of verify_ref_format()
"git commit" used to discard the index and re-read from the filesystem
just in case the pre-commit hook has updated it in the middle; this
has been optimized out when we know we do not run the pre-commit hook.
* kw/commit-keep-index-when-pre-commit-is-not-run:
commit: skip discarding the index if there is no pre-commit hook
"git rebase", especially when it is run by mistake and ends up
trying to replay many changes, spent long time in silence. The
command has been taught to show progress report when it spends
long time preparing these many changes to replay (which would give
the user a chance to abort with ^C).
* kw/rebase-progress:
rebase: turn on progress option by default for format-patch
format-patch: have progress option while generating patches
Follow the Oxford style, which says to use "up-to-date" before the noun,
but "up to date" after it. Don't change plumbing (specifically
send-pack.c, but transport.c (git push) also has the same string).
This was produced by grepping for "up-to-date" and "up to date". It
turned out we only had to edit in one direction, removing the hyphens.
Fix a typo in Documentation/git-diff-index.txt while we're there.
Reported-by: Jeffrey Manian <jeffrey.manian@gmail.com>
Reported-by: STEVEN WHITE <stevencharleswhitevoices@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the `git merge` process is killed while waiting for the editor to
finish, the merge state is lost but the prepared merge msg and tree is kept.
So, a subsequent `git commit` creates a squashed merge even when the
user asked for proper merge commit originally.
Demonstrate the problem with a test crafted after the in t7502. The test
requires EXECKEEPSPID (thus does not run under MINGW).
Save the merge state earlier (in the non-squash case) so that it does
not get lost. This makes the test pass.
Reported-by: hIpPy <hippy2981@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_merge_state() writes out the merge heads, mode, and msg. But we
may want to write out heads, mode without the msg. So, split out heads
(+mode) into a separate function write_merge_heads() that is called by
write_merge_state().
No funtional change so far, except when these non-atomic writes are
interrupted: we write heads-mode-msg now when we used to write
heads-msg-mode.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prepare_to_commit() cannot be reached in the non-squash case:
It is called by merge_trivial() and finish_automerge() only, but the
calls to the latter are somewhat hard to track:
If option_commit is not set, the code in cmd_merge() uses a fake
conflict return code (ret=1) to avoid writing the tree, which also
avoids setting automerge_was_ok (just as in the proper ret==1 case), so
that finish_automerge() is not called.
To ensure that no code change breaks that assumption, safe-guard
prepare_to_commit() by a BUG() statement.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking the conditional of "while (me->remaining)", we did not
hold the lock. Calling find_deltas would still be safe, since it checks
"remaining" (after taking the lock) and is able to handle all values. In
fact, this could (currently) not trigger any bug: a bug could happen if
`remaining` transitioning from zero to non-zero races with the evaluation
of the while-condition, but these are always separated by the
data_ready-mechanism.
Make sure we have the lock when we read `remaining`. This does mean we
release it just so that find_deltas can take it immediately again. We
could tweak the contract so that the lock should be taken before calling
find_deltas, but let's defer that until someone can actually show that
"unlock+lock" has a measurable negative impact.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git am -s" has been taught that some input may end with a trailer
block that is not Signed-off-by: and it should refrain from adding
an extra blank line before adding a new sign-off in such a case.
* pw/am-signoff:
am: fix signoff when other trailers are present
Code clean-up.
* ma/parse-maybe-bool:
parse_decoration_style: drop unused argument `var`
treewide: deprecate git_config_maybe_bool, use git_parse_maybe_bool
config: make git_{config,parse}_maybe_bool equivalent
config: introduce git_parse_maybe_bool_text
t5334: document that git push --signed=1 does not work
Doc/git-{push,send-pack}: correct --sign= to --signed=
"git clone --recurse-submodules --quiet" did not pass the quiet
option down to submodules.
* bw/clone-recursive-quiet:
clone: teach recursive clones to respect -q
"git grep --recurse-submodules" has been reworked to give a more
consistent output across submodule boundary (and do its thing
without having to fork a separate process).
* bw/grep-recurse-submodules:
grep: recurse in-process using 'struct repository'
submodule: merge repo_read_gitmodules and gitmodules_config
submodule: check for unmerged .gitmodules outside of config parsing
submodule: check for unstaged .gitmodules outside of config parsing
submodule: remove fetch.recursesubmodules from submodule-config parsing
submodule: remove submodule.fetchjobs from submodule-config parsing
config: add config_from_gitmodules
cache.h: add GITMODULES_FILE macro
repository: have the_repository use the_index
repo_read_index: don't discard the index
Commands like "git rebase" accepted the --rerere-autoupdate option
from the command line, but did not always use it. This has been
fixed.
* pw/sequence-rerere-autoupdate:
cherry-pick/revert: reject --rerere-autoupdate when continuing
cherry-pick/revert: remember --rerere-autoupdate
t3504: use test_commit
rebase -i: honor --rerere-autoupdate
rebase: honor --rerere-autoupdate
am: remember --rerere-autoupdate setting
"git push --recurse-submodules $there HEAD:$target" was not
propagated down to the submodules, but now it is.
* bw/push-options-recursively-to-submodules:
submodule--helper: teach push-check to handle HEAD
We used to expose the full power of the delayed progress API to the
callers, so that they can specify, not just the message to show and
expected total amount of work that is used to compute the percentage
of work performed so far, the percent-threshold parameter P and the
delay-seconds parameter N. The progress meter starts to show at N
seconds into the operation only if we have not yet completed P per-cent
of the total work.
Most callers used either (0%, 2s) or (50%, 1s) as (P, N), but there
are oddballs that chose more random-looking values like 95%.
For a smoother workload, (50%, 1s) would allow us to start showing
the progress meter earlier than (0%, 2s), while keeping the chance
of not showing progress meter for long running operation the same as
the latter. For a task that would take 2s or more to complete, it
is likely that less than half of it would complete within the first
second, if the workload is smooth. But for a spiky workload whose
earlier part is easier, such a setting is likely to fail to show the
progress meter entirely and (0%, 2s) is more appropriate.
But that is merely a theory. Realistically, it is of dubious value
to ask each codepath to carefully consider smoothness of their
workload and specify their own setting by passing two extra
parameters. Let's simplify the API by dropping both parameters and
have everybody use (0%, 2s).
Oh, by the way, the percent-threshold parameter and the structure
member were consistently misspelled, which also is now fixed ;-)
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies function declaration and allows for use of strbuf_rtrim
instead of modifying buffer directly.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--set-upstream' option of branch was deprecated in b347d06b
("branch: deprecate --set-upstream and show help if we detect
possible mistaken use", 2012-08-30) and has been planned for removal
ever since.
In order to prevent "--set-upstream" on a command line from being taken as
an abbreviated form of "--set-upstream-to", explicitly catch "--set-upstream"
option and die, instead of just removing it from the list of options.
Before this change, an attempt to use "--set-upstream" resulted in:
$ git branch
* master
$ git branch --set-upstream origin/master
The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to
Branch origin/master set up to track local branch master.
$ echo $?
0
$ git branch
* master
origin/master
With this change, the behaviour becomes like this:
$ git branch
* master
$ git branch --set-upstream origin/master
fatal: the '--set-upstream' option is no longer supported. Please use '--track' or '--set-upstream-to' instead.
$ echo $?
128
$ git branch
* master
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is not a pre-commit hook, there is no reason to discard
the index and reread it.
This change checks to presence of a pre-commit hook and then only
discards the index if there was one.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last few commits have added command line options that
can turn interpret-trailers into a parsing tool. Since
they'd most often be used together, let's provide a
convenient single option for callers to invoke this mode.
This is implemented as a callback rather than a boolean so
that its effect is applied immediately, as if those options
had been specified. Later options can then override them.
E.g.:
git interpret-trailers --parse --no-unfold
would work.
Let's also update the documentation to make clear that this
parsing mode behaves quite differently than the normal
"add trailers to the input" mode.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of "--only-trailers" is to give a caller an output
that's easy for them to parse. Getting rid of the
non-trailer material helps, but we still may see more
complicated syntax like whitespace continuation. Let's add
an option to unfold any continuation, giving the output as a
single "key: value" line per trailer.
As a bonus, this could be used even without --only-trailers
to clean up unusual formatting in the incoming data.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to invoke interpret-trailers for the
primary purpose of parsing existing trailers. But in that
case, we don't want to apply existing ifMissing or ifExists
rules from the config. Let's add a special mode where we
avoid applying those rules. Coupled with --only-trailers,
this gives us a reasonable parsing tool.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In theory it's easy for any reader who wants to parse
trailers to do so. But there are a lot of subtle corner
cases around what counts as a trailer, when the trailer
block begins and ends, etc. Since interpret-trailers already
has our parsing logic, let's let callers ask it to just
output the trailers.
They still have to parse the "key: value" lines, but at
least they can ignore all of the other corner cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When generating patches for the rebase command, if the user does
not realize the branch they are rebasing onto is thousands of
commits different, there is no progress indication after initial
rewinding message.
The progress meter as presented in this patch assumes the thousands of
patches to have a fine granularity as well as assuming to require all
the same amount of work/time for each, such that a steady progress bar
is achieved.
We do not want to estimate the time for each patch based e.g.
on their size or number of touched files (or parents) as that is too
expensive for just a progress meter.
This patch allows a progress option to be passed to format-patch
so that the user can be informed the progress of generating the
patch. This option is then used by the rebase command when
calling format-patch.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All callers of fill_tree_descriptor() have been converted to object_id
already, so convert that function as well. As a nice side-effect we get
rid of NULL checks in tree-diff.c, as fill_tree_descriptor() already
does them for us.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow using non-default values for trailers without having to set
them up in .gitconfig first. For example, if you have the following
configuration
trailer.signed-off-by.where = end
you may use "--where before" when a patch author forgets his
Signed-off-by and provides it in a separate email. Likewise for
--if-exists and --if-missing
Reverting to the behavior specified by .gitconfig is done with
--no-where, --no-if-exists and --no-if-missing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will provide a place to store the current state of the
--where, --if-exists and --if-missing options.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "tag.pager" configuration variable was useless for those who
actually create tag objects, as it interfered with the use of an
editor. A new mechanism has been introduced for commands to enable
pager depending on what operation is being carried out to fix this,
and then "git tag -l" is made to run pager by default.
* ma/pager-per-subcommand-action:
git.c: ignore pager.* when launching builtin as dashed external
tag: change default of `pager.tag` to "on"
tag: respect `pager.tag` in list-mode only
t7006: add tests for how git tag paginates
git.c: provide setup_auto_pager()
git.c: let builtins opt for handling `pager.foo` themselves
builtin.h: take over documentation from api-builtin.txt
"git log --tag=no-such-tag" showed log starting from HEAD, which
has been fixed---it now shows nothing.
* jk/rev-list-empty-input:
revision: do not fallback to default when rev_input_given is set
rev-list: don't show usage when we see empty ref patterns
revision: add rev_input_given flag
t6018: flesh out empty input/output rev-list tests
"git commit" when seeing an totally empty message said "you did not
edit the message", which is clearly wrong. The message has been
corrected.
* ks/commit-abort-on-empty-message-fix:
commit: check for empty message before the check for untouched template
Many uses of comparision callback function the hashmap API uses
cast the callback function type when registering it to
hashmap_init(), which defeats the compile time type checking when
the callback interface changes (e.g. gaining more parameters).
The callback implementations have been updated to take "void *"
pointers and cast them to the type they expect instead.
* sb/hashmap-cleanup:
t/helper/test-hashmap: use custom data instead of duplicate cmp functions
name-hash.c: drop hashmap_cmp_fn cast
submodule-config.c: drop hashmap_cmp_fn cast
remote.c: drop hashmap_cmp_fn cast
patch-ids.c: drop hashmap_cmp_fn cast
convert/sub-process: drop cast to hashmap_cmp_fn
config.c: drop hashmap_cmp_fn cast
builtin/describe: drop hashmap_cmp_fn cast
builtin/difftool.c: drop hashmap_cmp_fn cast
attr.c: drop hashmap_cmp_fn cast
Numerous bugs in walking of reflogs via "log -g" and friends have
been fixed.
* jk/reflog-walk:
reflog-walk: apply --since/--until to reflog dates
reflog-walk: stop using fake parents
rev-list: check reflog_info before showing usage
get_revision_1(): replace do-while with an early return
log: do not free parents when walking reflog
log: clarify comment about reflog cycles
revision: disallow reflog walking with revs->limited
t1414: document some reflog-walk oddities
The filter-process interface learned to allow a process with long
latency give a "delayed" response.
* ls/filter-process-delayed:
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
Start using selected c99 constructs in small, stable and
essentialpart of the system to catch people who care about
older compilers that do not grok them.
* jk/c99:
clean.c: use designated initializer
strbuf: use designated initializers in STRBUF_INIT
"%C(color name)" in the pretty print format always produced ANSI
color escape codes, which was an early design mistake. They now
honor the configuration (e.g. "color.ui = never") and also tty-ness
of the output medium.
* jk/ref-filter-colors:
ref-filter: consult want_color() before emitting colors
pretty: respect color settings for %C placeholders
rev-list: pass diffopt->use_colors through to pretty-print
for-each-ref: load config earlier
color: check color.ui in git_default_config()
ref-filter: pass ref_format struct to atom parsers
ref-filter: factor out the parsing of sorting atoms
ref-filter: make parse_ref_filter_atom a private function
ref-filter: provide a function for parsing sort options
ref-filter: move need_color_reset_at_eol into ref_format
ref-filter: abstract ref format into its own struct
ref-filter: simplify automatic color reset
t: use test_decode_color rather than literal ANSI codes
docs/for-each-ref: update pointer to color syntax
check return value of verify_ref_format()
Code clean-up.
* rs/move-array:
ls-files: don't try to prune an empty index
apply: use COPY_ARRAY and MOVE_ARRAY in update_image()
use MOVE_ARRAY
add MOVE_ARRAY
Conversion from uchar[20] to struct object_id continues.
* bc/object-id:
sha1_name: convert uses of 40 to GIT_SHA1_HEXSZ
sha1_name: convert GET_SHA1* flags to GET_OID*
sha1_name: convert get_sha1* to get_oid*
Convert remaining callers of get_sha1 to get_oid.
builtin/unpack-file: convert to struct object_id
bisect: convert bisect_checkout to struct object_id
builtin/update_ref: convert to struct object_id
sequencer: convert to struct object_id
remote: convert struct push_cas to struct object_id
submodule: convert submodule config lookup to use object_id
builtin/merge-tree: convert remaining caller of get_sha1 to object_id
builtin/fsck: convert remaining caller of get_sha1 to object_id
Conversion from uchar[20] to struct object_id continues.
* sb/object-id:
tag: convert gpg_verify_tag to use struct object_id
commit: convert lookup_commit_graft to struct object_id
Move the code for releasing tree buffers and commit buffers in
fsck_obj() to the end of the function and make sure it's executed no
matter of an error is encountered or not.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of a magic string length constant by using skip_prefix() instead
of starts_with().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have two options and are about to add a few more.
To avoid having a huge number of boolean arguments, let's
convert to an options struct which can be passed in.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to adding the missing newline, add the x-ecutable bit
'mode change' character to the error message. This message now has
the same form as similar messages output by 'update-index'.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there was no 'Signed-off-by:' trailer but another trailer such as
'Reported-by:' then 'git am --signoff' would add a blank line between
the existing trailers and the added 'Signed-off-by:' line. e.g.
Rebase accepts '--rerere-autoupdate' as an option but only honors
it if '-m' is also given. Fix it for a non-interactive rebase by
passing on the option to 'git am' and 'git cherry-pick'.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Fix by using the code provided for this purpose in sequencer.c.
Change the tests so that they check the formatting of the
'Signed-off-by:' lines rather than just grepping for them.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only difference between these is that the former takes an argument
`name` which it ignores completely. Still, the callers are quite careful
to provide reasonable values for it.
Once in-flight topics have landed, we should be able to remove
git_config_maybe_bool. In the meantime, document it as deprecated in the
technical documentation. While at it, document git_parse_maybe_bool.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'git clone --recurse-submodules' to respect the '-q' option by
passing down the quiet flag to the process which handles cloning of
submodules.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the submodule-config subsystem can lazily read the gitmodules
file we no longer need to explicitly pre-read the gitmodules by calling
'gitmodules_config()' so let's remove it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to use the submodule-config subsystem, callers first need to
initialize it by calling 'repo_read_gitmodules()' or
'gitmodules_config()' (which just redirects to
'repo_read_gitmodules()'). There are a couple of callers who need to
load an explicit revision of the repository's .gitmodules file (grep) or
need to modify the .gitmodules file so they would need to load it before
modify the file (checkout), but the majority of callers are simply
reading the .gitmodules file present in the working tree. For the
common case it would be nice to avoid the boilerplate of initializing
the submodule-config system before using it, so instead let's perform
lazy-loading of the submodule-config system.
Remove the calls to reading the gitmodules file from ls-files to show
that lazy-loading the .gitmodules file works.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate the functions used to initialize the submodule-config to
submodule-config.c so that the callback routine used in the
initialization process can be static and prevent it from being used
outside of initializing the submodule-config through the main API.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the last remaining caller of 'submodule_config()' as well as the
function itself.
With 'submodule_config()' being removed the submodule-config API can be
a little simpler as callers don't need to worry about whether or not
they need to overlay the repository's config on top of the
submodule-config. This also makes it more difficult to accidentally
add non-submodule specific configuration to the .gitmodules file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'submodule.update' config was historically used and respected by the
'submodule update' command because update handled a variety of different
ways it updated a submodule. As we begin teaching other commands about
submodules it makes more sense for the different settings of
'submodule.update' to be handled by the individual commands themselves
(checkout, rebase, merge, etc) so it shouldn't be respected by the
native checkout command.
Also remove the overlaying of the repository's config (via using
'submodule_config()') from the commands which use the unpack-trees
logic (checkout, read-tree, reset).
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't rely on overlaying the repository's config on top of the
submodule-config, instead query the repository's config directly for the
fetch_recurse field.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't rely on overlaying the repository's config on top of the
submodule-config, instead query the repository's config directly for the
url and the update strategy configuration.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't rely on overlaying the repository's config on top of the
submodule-config, instead query the repository's config directly for the
branch field.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch taught `git tag` to only respect `pager.tag` in
list-mode. That patch left the default value of `pager.tag` at "off".
After that patch, it makes sense to let the default value be "on"
instead, since it will help with listing many tags, but will not hurt
users of `git tag -a` as it would have before. Make that change. Update
documentation and tests.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using, e.g., `git -c pager.tag tag -a new-tag` results in errors such as
"Vim: Warning: Output is not to a terminal" and a garbled terminal.
Someone who makes use of both `git tag -a` and `git tag -l` will
probably not set `pager.tag`, so that `git tag -a` will actually work,
at the cost of not paging output of `git tag -l`.
Use the mechanisms introduced in two earlier patches to ignore
`pager.tag` in git.c and let the `git tag` builtin handle it on its own.
Only respect `pager.tag` when running in list-mode.
There is a window between where the pager is started before and after
this patch. This means that early errors can behave slightly different
before and after this patch. Since operation-parsing has to happen
inside this window, this can be seen with `git -c pager.tag="echo pager
is used" tag -l --unknown-option`. This change in paging-behavior should
be acceptable since it only affects erroneous usages.
Update the documentation and update tests.
If an alias is used to run `git tag -a`, then `pager.tag` will still be
respected. Document this known breakage. It will be fixed in a later
commit. Add a similar test for `-l`, which works.
Noticed-by: Anatoly Borodin <anatoly.borodin@gmail.com>
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user gives us no starting point for a traversal, we
want to complain with our normal usage message. But if they
tried to do so with "--all" or "--glob", but that happened
not to match any refs, the usage message isn't helpful. We
should just give them the empty output they asked for
instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cherry-pick and revert should not accept --[no-]rerere-autoupdate once
they have started.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Save the rerere-autoupdate setting so that it is remembered after
stopping for the user to resolve conflicts.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit aee9c7d65 (Submodules: Add the new "ignore" config option for
diff and status) introduced the ignore configuration option for
submodules so that configured submodules could be omitted from the
status and diff commands. Because this flag is respected in the diff
machinery it has the unintended consequence of potentially prohibiting
users from adding or resetting a submodule, even when a path to the
submodule is explicitly given.
Ensure that submodules can be added or set, even if they are configured
to be ignored, by setting the `DIFF_OPT_OVERRIDE_SUBMODULE_CONFIG` diff
flag.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/object-id:
sha1_name: convert uses of 40 to GIT_SHA1_HEXSZ
sha1_name: convert GET_SHA1* flags to GET_OID*
sha1_name: convert get_sha1* to get_oid*
Convert remaining callers of get_sha1 to get_oid.
builtin/unpack-file: convert to struct object_id
bisect: convert bisect_checkout to struct object_id
builtin/update_ref: convert to struct object_id
sequencer: convert to struct object_id
remote: convert struct push_cas to struct object_id
submodule: convert submodule config lookup to use object_id
builtin/merge-tree: convert remaining caller of get_sha1 to object_id
builtin/fsck: convert remaining caller of get_sha1 to object_id
tag: convert gpg_verify_tag to use struct object_id
commit: convert lookup_commit_graft to struct object_id
* bw/grep-recurse-submodules:
grep: recurse in-process using 'struct repository'
submodule: merge repo_read_gitmodules and gitmodules_config
submodule: check for unmerged .gitmodules outside of config parsing
submodule: check for unstaged .gitmodules outside of config parsing
submodule: remove fetch.recursesubmodules from submodule-config parsing
submodule: remove submodule.fetchjobs from submodule-config parsing
config: add config_from_gitmodules
cache.h: add GITMODULES_FILE macro
repository: have the_repository use the_index
repo_read_index: don't discard the index
Convert grep to use 'struct repository' which enables recursing into
submodules to be handled in-process.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'is_staging_gitmodules_ok()' to be able to determine in the
'.gitmodules' file has unstaged changes based on the passed in index
instead of relying on a global variable which is set during the
submodule-config parsing.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the 'fetch.recursesubmodules' configuration option from the
general submodule-config parsing and instead rely on using
'config_from_gitmodules()' in order to maintain backwards compatibility
with this config being placed in the '.gitmodules' file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '.gitmodules' file should only contain information pertinent to
configuring individual submodules (name to path mapping, URL where to
obtain the submodule, etc.) while other configuration like the number of
jobs to use when fetching submodules should be a part of the
repository's config.
Remove the 'submodule.fetchjobs' configuration option from the general
submodule-config parsing and instead rely on using the
'config_from_gitmodules()' in order to maintain backwards compatibility
with this config being placed in the '.gitmodules' file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We run an early part of "git gc" that deals with refs before
daemonising (and not under lock) even when running a background
auto-gc, which caused multiple gc processes attempting to run the
early part at the same time. This is now prevented by running the
early part also under the GC lock.
* jk/gc-pre-detach-under-hook:
gc: run pre-detach operations under lock
This operation has quadratic complexity, which is especially painful
on Windows, where shell scripts are *already* slow (mainly due to the
overhead of the POSIX emulation layer).
Let's reimplement this with linear complexity (using a hash map to
match the commits' subject lines) for the common case; Sadly, the
fixup/squash feature's design neglected performance considerations,
allowing arbitrary prefixes (read: `fixup! hell` will match the
commit subject `hello world`), which means that we are stuck with
quadratic performance in the worst case.
The reimplemented logic also happens to fix a bug where commented-out
lines (representing empty patches) were dropped by the previous code.
While at it, clarify how the fixup/squash feature works in `git rebase
-i`'s man page.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular on Windows, where shell scripts are even more expensive
than on MacOSX or Linux, it makes sense to move a loop that forks
Git at least once for every line in the todo list into a builtin.
Note: The original code did not try to skip unnecessary picks of root
commits but punts instead (probably --root was not considered common
enough of a use case to bother optimizing). We do the same, for now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular on Windows, where shell scripts are even more expensive
than on MacOSX or Linux, it makes sense to move a loop that forks
Git at least once for every line in the todo list into a builtin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is crucial to improve performance on Windows, as the speed is now
mostly dominated by the SHA-1 transformation (because it spawns a new
rev-parse process for *every* line, and spawning processes is pretty
slow from Git for Windows' MSYS2 Bash).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first step of an interactive rebase is to generate the so-called "todo
script", to be stored in the state directory as "git-rebase-todo" and to
be edited by the user.
Originally, we adjusted the output of `git log <options>` using a simple
sed script. Over the course of the years, the code became more
complicated. We now use shell scripting to edit the output of `git log`
conditionally, depending whether to keep "empty" commits (i.e. commits
that do not change any files).
On platforms where shell scripting is not native, this can be a serious
drag. And it opens the door for incompatibilities between platforms when
it comes to shell scripting or to Unix-y commands.
Let's just re-implement the todo script generation in plain C, using the
revision machinery directly.
This is substantially faster, improving the speed relative to the
shell script version of the interactive rebase from 2x to 3x on Windows.
Note that the rearrange_squash() function in git-rebase--interactive
relied on the fact that we set the "format" variable to the config setting
rebase.instructionFormat. Relying on a side effect like this is no good,
hence we explicitly perform that assignment (possibly again) in
rearrange_squash().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ls/filter-process-delayed:
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
Remove the unused variable "heads" from cmd_fsck().
This variable was made unused in commit c3271a0 ("fsck: do not fallback
"git fsck <bogus>" to "git fsck"", 2017-01-17).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some projects require every commit, even merges, to be signed off
[*1*]. Because "git merge" does not have a "--signoff" option like
"git commit" does, the user needs to add one manually when the
command presents an editor to describe the merge, or later use "git
commit --amend --signoff".
Help developers of these projects by teaching "--signoff" option to
"git merge".
*1* https://public-inbox.org/git/CAHv71zK5SqbwrBFX=a8-DY9H3KT4FEyMgv__p2gZzNr0WUAPUw@mail.gmail.com/T/#u
Requested-by: Dan Kohn <dan@linuxfoundation.org>
Signed-off-by: Łukasz Gryglicki <lukaszgryglicki@o2.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Align argument list and place opening brace on its own line.
Signed-off-by: Dimitrios Christidis <dimitrios@christidis.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By declaring the task_cb parameter of type `void **`, the signature of
the get_next_task method suggests that the "task-specific cookie" can be
defined in that method, and the signatures of the start_failure and of
the task_finished methods declare that parameter of type `void *`,
suggesting that those methods are mere users of said cookie.
That convention makes a total lot of sense, because the tasks are pretty
much dead when one of the latter two methods is called: there would be
little use to reset that cookie at that point because nobody would be
able to see the change afterwards.
However, this is not what the code actually does. For all three methods,
it passes the *address* of pp->children[i].data.
As reasoned above, this behavior makes no sense. So let's change the
implementation to adhere to the convention suggested by the signatures.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 06bf4ad1d (push: propagate remote and refspec with
--recurse-submodules) push was taught how to propagate a refspec down to
submodules when the '--recurse-submodules' flag is given. The only refspecs
that are allowed to be propagated are ones which name a ref which exists
in both the superproject and the submodule, with the caveat that 'HEAD'
was disallowed.
This patch teaches push-check (the submodule helper which determines if
a refspec can be propagated to a submodule) to permit propagating 'HEAD'
if and only if the superproject and the submodule both have the same
named branch checked out and the submodule is not in a detached head
state.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "used" field in struct object is only used by builtin/fsck. Remove
that field and modify builtin/fsck to use a flag instead.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If obj->type == OBJ_TREE, an invocation of fsck_walk() will invoke
parse_tree() and return quickly if that returns nonzero, so it is of no
use for traverse_one_object() to invoke parse_tree() in this situation
before invoking fsck_walk(). Remove that code.
The behavior of traverse_one_object() is changed slightly in that it now
returns -1 instead of 1 in the case that parse_tree() fails, but this is
not an issue because its only caller (traverse_reachable) does not care
about the value as long as it is nonzero.
This code was introduced in commit 271b8d2 ("builtin-fsck: move away
from object-refs to fsck_walk", 2008-02-25). The same issue existed in
that commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If done_pbase_paths is NULL then done_pbase_paths_num must be zero and
done_pbase_path_pos() returns -1 without accessing the array, so the
check is not necessary.
If the invariant was violated then the check would make sure we keep
on going and allocate the necessary amount of memory in the next
ALLOC_GROW call. That sounds nice, but all array entries except for
one would contain garbage data.
If the invariant was violated without the check we'd get a segfault in
done_pbase_path_pos(), i.e. an observable crash, alerting us of the
presence of a bug.
Currently there is no such bug: Only the functions check_pbase_path()
and cleanup_preferred_base() change pointer and counter, and both make
sure to keep them in sync. Get rid of the check anyway to allow us to
see if later changes introduce such a defect, and to simplify the code.
Detected by Coverity Scan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We run an early part of "git gc" that deals with refs before
daemonising (and not under lock) even when running a background
auto-gc, which caused multiple gc processes attempting to run the
early part at the same time. This is now prevented by running the
early part also under the GC lock.
* jk/gc-pre-detach-under-hook:
gc: run pre-detach operations under lock
This is another test balloon to see if we get complaints from people
whose compilers do not support designated initializer for arrays.
The use of the feature is not all that interesting for cases like
the one this patch touches, where the initialized elements of the
array is dense, but it would be nice if we can use the feature to
initialize an array that has elements initialized to interesting
values only sparsely.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check for whether the template given to 'git commit' is untouched
is done before the empty message check. This results in a wrong error
message being displayed in the following case. When the user removes
everything in template completely to abort the commit he is shown the
"template untouched" error which is wrong. He should be shown the
"empty message" error.
Do the empty message check before checking for an untouched template
thus fixing this issue.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit early when asked to prune an index that contains no entries to
begin with. This avoids pointer arithmetic on istate->cache, which is
possibly NULL in that case.
Found with Clang's UBSan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the code for moving members inside of an array and make it more
robust by using the helper macro MOVE_ARRAY. It calculates the size
based on the specified number of elements for us and supports NULL
pointers when that number is zero. Raw memmove(3) calls with NULL can
cause the compiler to (over-eagerly) optimize out later NULL checks.
This patch was generated with contrib/coccinelle/array.cocci and spatch
(Coccinelle).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We set old_oid to NULL if we found out that it's a corrupt reference.
In that case don't try to access the hash member and pass NULL to
ref_transaction_delete() instead.
Found with Clang's UBSan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if note is NULL, as we already do for different purposes a few
lines above, and pass a NULL pointer to prepare_note_data() in that
case instead of trying to access the hash member.
Found with Clang's UBSan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the flags for get_oid_with_context and friends to use "OID"
instead of "SHA1" in their names.
This transform was made by running the following one-liner on the
affected files:
perl -pi -e 's/GET_SHA1/GET_OID/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the uses of unsigned char * to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
