When creating a new branch B by copying the branch A that happens to
be the current branch, it also updates HEAD to point at the new
branch. It probably was made this way because "git branch -c A B"
piggybacked its implementation on "git branch -m A B",
This does not match the usual expectation. If I were sitting on a
blue chair, and somebody comes and repaints it to red, I would
accept ending up sitting on a chair that is now red (I am also OK to
stand, instead, as there no longer is my favourite blue chair). But
if somebody creates a new red chair, modelling it after the blue
chair I am sitting on, I do not expect to be booted off of the blue
chair and ending up on sitting on the new red one.
Let's fix this before it hits 'next'. Those who want to create a
new branch and switch to it can do "git checkout B" after doing a
"git branch -c B", and if that operation is so useful and deserves a
short-hand way to do so, perhaps extend "git checkout -b B" to copy
configurations while creating the new branch B.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gcc 7 adds -Wimplicit-fallthrough, which can warn when a
switch case falls through to the next case. The general idea
is that the compiler can't tell if this was intentional or
not, so you should annotate any intentional fall-throughs as
such, leaving it to complain about any unannotated ones.
There's a GNU __attribute__ which can be used for
annotation, but of course we'd have to #ifdef it away on
non-gcc compilers. Gcc will also recognize
specially-formatted comments, which matches our current
practice. Let's extend that practice to all of the
unannotated sites (which I did look over and verify that
they were behaving as intended).
Ideally in each case we'd actually give some reasons in the
comment about why we're falling through, or what we're
falling through to. And gcc does support that with
-Wimplicit-fallthrough=2, which relaxes the comment pattern
matching to anything that contains "fallthrough" (or a
variety of spelling variants). However, this isn't the
default for -Wimplicit-fallthrough, nor for -Wextra. In the
name of simplicity, it's probably better for us to support
the default level, which requires "fallthrough" to be the
only thing in the comment (modulo some window dressing like
"else" and some punctuation; see the gcc manual for the
complete set of patterns).
This patch suppresses all warnings due to
-Wimplicit-fallthrough. We might eventually want to add that
to the DEVELOPER Makefile knob, but we should probably wait
until gcc 7 is more widely adopted (since earlier versions
will complain about the unknown warning type).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dc944b65f1 (get_sha1_with_context: dynamically
allocate oc->path, 2017-05-19) changed the rules that
callers must follow for seeing if we parsed a path in the
object name. The rules switched from "check if the oc.path
buffer is empty" to "check if the oc.path pointer is NULL".
But that commit forgot to update some sites in
cat_one_file(), meaning we might dereference a NULL pointer.
You can see this by making a path-aware request like
--textconv without specifying --path, and giving an object
name that doesn't have a path in it. Like:
git cat-file --textconv HEAD
which will reliably segfault.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When run with the "-C" option, fast-export writes 'C' commands in its
output whenever the internal diff mechanism detects a file copy,
indicating that fast-import should copy the given existing file to the
given new filename. However, the diff mechanism works against the
prior version of the file, whereas fast-import uses whatever is current.
This causes issues when a commit both modifies a file and uses it as the
source for a copy.
Therefore, teach fast-export to refrain from writing 'C' when it has
already written a modification command for a file.
An existing test in t9350-fast-export is also fixed in this patch. The
existing line "C file6 file7" copies the wrong version of file6, but it
has coincidentally worked because file7 was subsequently overridden.
Reported-by: Juraj Oršulić <juraj.orsulic@fer.hr>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git describe` uses `--match`, it matches only tags, basically
ignoring the `--all` argument even when it is specified.
Fix it by also matching branch name and $remote_name/$remote_branch_name,
for remote-tracking references, with the specified patterns. Update
documentation accordingly and add tests.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running `git fetch --unshallow` on a repo that is not in fact shallow
produces a fatal error message. Add a helper to rev-parse that scripters
can use to determine whether a repo is shallow or not.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, rev-parse only interprets a space ' ' character as the
delimiter between the option spec and the help text. So if a tab
character is placed between the option spec and the help text, it will
be interpreted as part of the long option name or as part of the arg
hint. If it is interpreted as part of the long option name, then
rev-parse will produce what will be interpreted as multiple arguments
on the command line.
For example, the following option spec (note: there is a <tab> between
"frotz" and "enable"):
frotz enable frotzing
will produce the following set expression when --frotz is used:
set -- --frotz --
instead of this:
set -- --frotz enable --
Mark t1502.2 as fixed.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When searching for flag characters in the option spec, we should ensure
the search stays within the bounds of the option spec and does not enter
the help text portion of the spec. So when we find the boundary white
space marking the start of the help text, let's mark it with a nul
character. Then when we search for flag characters starting from the
beginning of the string we'll stop at the nul and won't enter the help
text.
Now, the following option spec:
exclame this does something!
will produce this 'set' expression when --exclame is specified:
set -- --exclame --
instead of this one:
set -- --exclame this does something --
Mark t1502.4 and t1502.5 as fixed.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike "git commit-tree < file", "git commit-tree -F file" did not
pass the contents of the file verbatim and instead completed an
incomplete line at the end, if exists. The latter has been updated
to match the behaviour of the former.
* rk/commit-tree-make-F-verbatim:
commit-tree: do not complete line in -F input
Many leaks of strbuf have been fixed.
* rs/strbuf-leakfix: (34 commits)
wt-status: release strbuf after use in wt_longstatus_print_tracking()
wt-status: release strbuf after use in read_rebase_todolist()
vcs-svn: release strbuf after use in end_revision()
utf8: release strbuf on error return in strbuf_utf8_replace()
userdiff: release strbuf after use in userdiff_get_textconv()
transport-helper: release strbuf after use in process_connect_service()
sequencer: release strbuf after use in save_head()
shortlog: release strbuf after use in insert_one_record()
sha1_file: release strbuf on error return in index_path()
send-pack: release strbuf on error return in send_pack()
remote: release strbuf after use in set_url()
remote: release strbuf after use in migrate_file()
remote: release strbuf after use in read_remote_branches()
refs: release strbuf on error return in write_pseudoref()
notes: release strbuf after use in notes_copy_from_stdin()
merge: release strbuf after use in write_merge_heads()
merge: release strbuf after use in save_state()
mailinfo: release strbuf on error return in handle_boundary()
mailinfo: release strbuf after use in handle_from()
help: release strbuf on error return in exec_woman_emacs()
...
As "git commit" to conclude a conflicted "git merge" honors the
commit-msg hook, "git merge" that recoreds a merge commit that
cleanly auto-merges should, but it didn't.
* sb/merge-commit-msg-hook:
builtin/merge: honor commit-msg hook for merges
Many of our programs consider that it is OK to release dynamic
storage that is used throughout the life of the program by simply
exiting, but this makes it harder to leak detection tools to avoid
reporting false positives. Plug many existing leaks and introduce
a mechanism for developers to mark that the region of memory
pointed by a pointer is not lost/leaking to help these tools.
* jk/leak-checkers:
add UNLEAK annotation for reducing leak false positives
set_git_dir: handle feeding gitdir to itself
repository: free fields before overwriting them
reset: free allocated tree buffers
reset: make tree counting less confusing
config: plug user_config leak
update-index: fix cache entry leak in add_one_file()
add: free leaked pathspec after add_files_to_cache()
test-lib: set LSAN_OPTIONS to abort by default
test-lib: --valgrind should not override --verbose-log
"git -c submodule.recurse=yes pull" did not work as if the
"--recurse-submodules" option was given from the command line.
This has been corrected.
* nm/pull-submodule-recurse-config:
pull: honor submodule.recurse config option
pull: fix cli and config option parsing order
Our hashmap implementation in hashmap.[ch] is not thread-safe when
adding a new item needs to expand the hashtable by rehashing; add
an API to disable the automatic rehashing to work it around.
* jh/hashmap-disable-counting:
hashmap: add API to disable item counting when threaded
The long-standing rule that an in-core lockfile instance, once it
is used, must not be freed, has been lifted and the lockfile and
tempfile APIs have been updated to reduce the chance of programming
errors.
* jk/incore-lockfile-removal:
stop leaking lock structs in some simple cases
ref_lock: stop leaking lock_files
lockfile: update lifetime requirements in documentation
tempfile: auto-allocate tempfiles on heap
tempfile: remove deactivated list entries
tempfile: use list.h for linked list
tempfile: release deactivated strbufs instead of resetting
tempfile: robustify cleanup handler
tempfile: factor out deactivation
tempfile: factor out activation
tempfile: replace die("BUG") with BUG()
tempfile: handle NULL tempfile pointers gracefully
tempfile: prefer is_tempfile_active to bare access
lockfile: do not rollback lock on failed close
tempfile: do not delete tempfile on failed close
always check return value of close_tempfile
verify_signed_buffer: prefer close_tempfile() to close()
setup_temporary_shallow: move tempfile struct into function
setup_temporary_shallow: avoid using inactive tempfile
write_index_as_tree: cleanup tempfile on error
Earlier in this codepath, we (ab)used "%<len>c" to read the hostname
recorded in the lockfile into locking_host[HOST_NAME_MAX + 1] while
substituting <len> with the actual value of HOST_NAME_MAX.
This turns out to be incorrect, as it is an instruction to read
exactly the specified number of bytes. Because we are trying to
read at most that many bytes, we should be using "%<len>s" instead.
Helped-by: A. Wilcox <awilfox@adelielinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git describe --match` with multiple patterns matches only first pattern.
If it fails, next patterns are not tried.
Fix it, add test cases and update existing test which has wrong
expectation.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value of write_in_full() is either "-1", or the
requested number of bytes[1]. If we make a partial write
before seeing an error, we still return -1, not a partial
value. This goes back to f6aa66cb95 (write_in_full: really
write in full or return error on disk full., 2007-01-11).
So checking anything except "was the return value negative"
is pointless. And there are a couple of reasons not to do
so:
1. It can do a funny signed/unsigned comparison. If your
"len" is signed (e.g., a size_t) then the compiler will
promote the "-1" to its unsigned variant.
This works out for "!= len" (unless you really were
trying to write the maximum size_t bytes), but is a
bug if you check "< len" (an example of which was fixed
recently in config.c).
We should avoid promoting the mental model that you
need to check the length at all, so that new sites are
not tempted to copy us.
2. Checking for a negative value is shorter to type,
especially when the length is an expression.
3. Linus says so. In d34cf19b89 (Clean up write_in_full()
users, 2007-01-11), right after the write_in_full()
semantics were changed, he wrote:
I really wish every "write_in_full()" user would just
check against "<0" now, but this fixes the nasty and
stupid ones.
Appeals to authority aside, this makes it clear that
writing it this way does not have an intentional
benefit. It's a historical curiosity that we never
bothered to clean up (and which was undoubtedly
cargo-culted into new sites).
So let's convert these obviously-correct cases (this
includes write_str_in_full(), which is just a wrapper for
write_in_full()).
[1] A careful reader may notice there is one way that
write_in_full() can return a different value. If we ask
write() to write N bytes and get a return value that is
_larger_ than N, we could return a larger total. But
besides the fact that this would imply a totally broken
version of write(), it would already invoke undefined
behavior. Our internal remaining counter is an unsigned
size_t, which means that subtracting too many byte will
wrap it around to a very large number. So we'll instantly
begin reading off the end of the buffer, trying to write
gigabytes (or petabytes) of data.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We ask to write 41 bytes and make sure that the return value
is at least 41. This is the same "dangerous" pattern that
was fixed in the prior commit (wherein a negative return
value is promoted to unsigned), though it is not dangerous
here because our "41" is a constant, not an unsigned
variable.
But we should convert it anyway to avoid modeling a
dangerous construct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The MRU cache that keeps track of recently used packs is represented
using two global variables:
struct mru packed_git_mru_storage;
struct mru *packed_git_mru = &packed_git_mru_storage;
Callers never assign to the packed_git_mru pointer, though, so we can
simplify by eliminating it and using &packed_git_mru_storage (renamed
to &packed_git_mru) directly. This variable is only used by the
packfile subsystem, making this a relatively uninvasive change (and
any new unadapted callers would trigger a compile error).
Noticed while moving these globals to the object_store struct.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user tries to use '--help' option on an aliased command
information about the alias is printed as sshown below,
$ git co --help
`git co' is aliased to `checkout'
This doesn't seem correct as the user has aliased only 'co' and not
'git co'. This might even be incorrect in cases in which the user has
used an alias like 'tgit'.
$ tgit co --help
`git co' is aliased to `checkout'
So, make the message more precise.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Message and doc updates.
* ma/up-to-date:
treewide: correct several "up-to-date" to "up to date"
Documentation/user-manual: update outdated example output
Killing "git merge --edit" before the editor returns control left
the repository in a state with MERGE_MSG but without MERGE_HEAD,
which incorrectly tells the subsequent "git commit" that there was
a squash merge in progress. This has been fixed.
* mg/killed-merge:
merge: save merge state earlier
merge: split write_merge_state in two
merge: clarify call chain
Documentation/git-merge: explain --continue
"git am -s" has been taught that some input may end with a trailer
block that is not Signed-off-by: and it should refrain from adding
an extra blank line before adding a new sign-off in such a case.
* pw/am-signoff:
am: fix signoff when other trailers are present
"git clone --recurse-submodules --quiet" did not pass the quiet
option down to submodules.
* bw/clone-recursive-quiet:
clone: teach recursive clones to respect -q
Commands like "git rebase" accepted the --rerere-autoupdate option
from the command line, but did not always use it. This has been
fixed.
* pw/sequence-rerere-autoupdate:
cherry-pick/revert: reject --rerere-autoupdate when continuing
cherry-pick/revert: remember --rerere-autoupdate
t3504: use test_commit
rebase -i: honor --rerere-autoupdate
rebase: honor --rerere-autoupdate
am: remember --rerere-autoupdate setting
"git push --recurse-submodules $there HEAD:$target" was not
propagated down to the submodules, but now it is.
* bw/push-options-recursively-to-submodules:
submodule--helper: teach push-check to handle HEAD
The "tag.pager" configuration variable was useless for those who
actually create tag objects, as it interfered with the use of an
editor. A new mechanism has been introduced for commands to enable
pager depending on what operation is being carried out to fix this,
and then "git tag -l" is made to run pager by default.
If this works out OK, I think there are low-hanging fruits in
other commands like "git branch" that outputs long list in one mode
while taking input in another.
* ma/pager-per-subcommand-action:
git.c: ignore pager.* when launching builtin as dashed external
tag: change default of `pager.tag` to "on"
tag: respect `pager.tag` in list-mode only
t7006: add tests for how git tag paginates
git.c: provide setup_auto_pager()
git.c: let builtins opt for handling `pager.foo` themselves
builtin.h: take over documentation from api-builtin.txt
"git log --tag=no-such-tag" showed log starting from HEAD, which
has been fixed---it now shows nothing.
* jk/rev-list-empty-input:
revision: do not fallback to default when rev_input_given is set
rev-list: don't show usage when we see empty ref patterns
revision: add rev_input_given flag
t6018: flesh out empty input/output rev-list tests
"git commit-tree -F <file>", unlike "cat <file> | git
commit-tree" (i.e. feeding the same contents from the standard
input), added a missing final newline when the input ended in an
incomplete line.
Correct this inconsistency by leaving the incomplete line as-is,
as erring on the side of not touching the input is preferrable
and expected for a plumbing command like "commit-tree".
Signed-off-by: Ross Kabus <rkabus@aerotech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original git-shortlog command parsed the output of
git-log, and the logic went something like this:
1. Read stdin looking for "author" lines.
2. Parse the identity into its name/email bits.
3. Apply mailmap to the name/email.
4. Reformat the identity into a single buffer that is our
"key" for grouping entries (either a name by default,
or "name <email>" if --email was given).
The first part happens in read_from_stdin(), and the other
three steps are part of insert_one_record().
When we do an internal traversal, we just swap out the stdin
read in step 1 for reading the commit objects ourselves.
Prior to 2db6b83d18 (shortlog: replace hand-parsing of
author with pretty-printer, 2016-01-18), that made sense; we
still had to parse the ident in the commit message.
But after that commit, we use pretty.c's "%an <%ae>" to get
the author ident (for simplicity). Which means that the
pretty printer is doing a parse/format under the hood, and
then we parse the result, apply the mailmap, and format the
result again.
Instead, we can just ask pretty.c to do all of those steps
for us (including the mailmap via "%aN <%aE>", and not
formatting the address when --email is missing).
And then we can push steps 2-4 into read_from_stdin(). This
speeds up "git shortlog -ns" on linux.git by about 3%, and
eliminates a leak in insert_one_record() of the namemailbuf
strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a common pattern in git commands to allocate some
memory that should last for the lifetime of the program and
then not bother to free it, relying on the OS to throw it
away.
This keeps the code simple, and it's fast (we don't waste
time traversing structures or calling free at the end of the
program). But it also triggers warnings from memory-leak
checkers like valgrind or LSAN. They know that the memory
was still allocated at program exit, but they don't know
_when_ the leaked memory stopped being useful. If it was
early in the program, then it's probably a real and
important leak. But if it was used right up until program
exit, it's not an interesting leak and we'd like to suppress
it so that we can see the real leaks.
This patch introduces an UNLEAK() macro that lets us do so.
To understand its design, let's first look at some of the
alternatives.
Unfortunately the suppression systems offered by
leak-checking tools don't quite do what we want. A
leak-checker basically knows two things:
1. Which blocks were allocated via malloc, and the
callstack during the allocation.
2. Which blocks were left un-freed at the end of the
program (and which are unreachable, but more on that
later).
Their suppressions work by mentioning the function or
callstack of a particular allocation, and marking it as OK
to leak. So imagine you have code like this:
int cmd_foo(...)
{
/* this allocates some memory */
char *p = some_function();
printf("%s", p);
return 0;
}
You can say "ignore allocations from some_function(),
they're not leaks". But that's not right. That function may
be called elsewhere, too, and we would potentially want to
know about those leaks.
So you can say "ignore the callstack when main calls
some_function". That works, but your annotations are
brittle. In this case it's only two functions, but you can
imagine that the actual allocation is much deeper. If any of
the intermediate code changes, you have to update the
suppression.
What we _really_ want to say is that "the value assigned to
p at the end of the function is not a real leak". But
leak-checkers can't understand that; they don't know about
"p" in the first place.
However, we can do something a little bit tricky if we make
some assumptions about how leak-checkers work. They
generally don't just report all un-freed blocks. That would
report even globals which are still accessible when the
leak-check is run. Instead they take some set of memory
(like BSS) as a root and mark it as "reachable". Then they
scan the reachable blocks for anything that looks like a
pointer to a malloc'd block, and consider that block
reachable. And then they scan those blocks, and so on,
transitively marking anything reachable from a global as
"not leaked" (or at least leaked in a different category).
So we can mark the value of "p" as reachable by putting it
into a variable with program lifetime. One way to do that is
to just mark "p" as static. But that actually affects the
run-time behavior if the function is called twice (you
aren't likely to call main() twice, but some of our cmd_*()
functions are called from other commands).
Instead, we can trick the leak-checker by putting the value
into _any_ reachable bytes. This patch keeps a global
linked-list of bytes copied from "unleaked" variables. That
list is reachable even at program exit, which confers
recursive reachability on whatever values we unleak.
In other words, you can do:
int cmd_foo(...)
{
char *p = some_function();
printf("%s", p);
UNLEAK(p);
return 0;
}
to annotate "p" and suppress the leak report.
But wait, couldn't we just say "free(p)"? In this toy
example, yes. But UNLEAK()'s byte-copying strategy has
several advantages over actually freeing the memory:
1. It's recursive across structures. In many cases our "p"
is not just a pointer, but a complex struct whose
fields may have been allocated by a sub-function. And
in some cases (e.g., dir_struct) we don't even have a
function which knows how to free all of the struct
members.
By marking the struct itself as reachable, that confers
reachability on any pointers it contains (including those
found in embedded structs, or reachable by walking
heap blocks recursively.
2. It works on cases where we're not sure if the value is
allocated or not. For example:
char *p = argc > 1 ? argv[1] : some_function();
It's safe to use UNLEAK(p) here, because it's not
freeing any memory. In the case that we're pointing to
argv here, the reachability checker will just ignore
our bytes.
3. Likewise, it works even if the variable has _already_
been freed. We're just copying the pointer bytes. If
the block has been freed, the leak-checker will skip
over those bytes as uninteresting.
4. Because it's not actually freeing memory, you can
UNLEAK() before we are finished accessing the variable.
This is helpful in cases like this:
char *p = some_function();
return another_function(p);
Writing this with free() requires:
int ret;
char *p = some_function();
ret = another_function(p);
free(p);
return ret;
But with unleak we can just write:
char *p = some_function();
UNLEAK(p);
return another_function(p);
This patch adds the UNLEAK() macro and enables it
automatically when Git is compiled with SANITIZE=leak. In
normal builds it's a noop, so we pay no runtime cost.
It also adds some UNLEAK() annotations to show off how the
feature works. On top of other recent leak fixes, these are
enough to get t0000 and t0001 to pass when compiled with
LSAN.
Note the case in commit.c which actually converts a
strbuf_release() into an UNLEAK. This code was already
non-leaky, but the free didn't do anything useful, since
we're exiting. Converting it to an annotation means that
non-leak-checking builds pay no runtime cost. The cost is
minimal enough that it's probably not worth going on a
crusade to convert these kinds of frees to UNLEAKS. I did it
here for consistency with the "sb" leak (though it would
have been equally correct to go the other way, and turn them
both into strbuf_release() calls).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to 65969d43d1 (merge: honor prepare-commit-msg hook, 2011-02-14)
merge should also honor the commit-msg hook: When a merge is stopped due
to conflicts or --no-commit, the subsequent commit calls the commit-msg
hook. However, it is not called after a clean merge. Fix this
inconsistency by invoking the hook after clean merges as well.
This change is motivated by Gerrit's commit-msg hook to install a ChangeId
trailer into the commit message. Without such a ChangeId, Gerrit refuses
to accept any commit by default, such that the inconsistency of (not)
running the commit-msg hook between commit and merge leads to confusion
and might block people from getting their work done.
As the githooks man page is very vocal about the possibility of skipping
the commit-msg hook via the --no-verify option, implement the option
in merge, too.
'git merge --continue' is currently implemented as calling cmd_commit
with no further arguments. This works for most other merge related options,
such as demonstrated via the --allow-unrelated-histories flag in the
test. The --no-verify option however is not remembered across invocations
of git-merge. Originally the author assumed an alternative in which the
'git merge --continue' command accepts the --no-verify flag, but that
opens up the discussion which flags are allows to the continued merge
command and which must be given in the first invocation.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull" supports a --recurse-submodules option but does not parse the
submodule.recurse configuration item to set the default for that option.
Meanwhile "git fetch" does support submodule.recurse, producing
confusing behavior: when submodule.recurse is enabled, "git pull"
recursively fetches submodules but does not update them after fetch.
Handle submodule.recurse in "git pull" to fix this.
Reported-by: Magnus Homann <magnus@homann.se>
Signed-off-by: Nicolas Morey-Chaisemartin <nicolas@morey-chaisemartin.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pull parses first the cli options and then the config option.
The expected behavior is the other way around, so that config
options can not override the cli ones.
This patch changes the parsing order so config options are
parsed first.
Signed-off-by: Nicolas Morey-Chaisemartin <nicolas@morey-chaisemartin.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is to address concerns raised by ThreadSanitizer on the mailing list
about threaded unprotected R/W access to map.size with my previous "disallow
rehash" change (0607e10009).
See:
https://public-inbox.org/git/adb37b70139fd1e2bac18bfd22c8b96683ae18eb.1502780344.git.martin.agren@gmail.com/
Add API to hashmap to disable item counting and thus automatic rehashing.
Also include API to later re-enable them.
When item counting is disabled, the map.size field is invalid. So to
prevent accidents, the field has been renamed and an accessor function
hashmap_get_size() has been added. All direct references to this
field have been been updated. And the name of the field changed
to map.private_size to communicate this.
Here is the relevant output from ThreadSanitizer showing the problem:
WARNING: ThreadSanitizer: data race (pid=10554)
Read of size 4 at 0x00000082d488 by thread T2 (mutexes: write M16):
#0 hashmap_add hashmap.c:209
#1 hash_dir_entry_with_parent_and_prefix name-hash.c:302
#2 handle_range_dir name-hash.c:347
#3 handle_range_1 name-hash.c:415
#4 lazy_dir_thread_proc name-hash.c:471
#5 <null> <null>
Previous write of size 4 at 0x00000082d488 by thread T1 (mutexes: write M31):
#0 hashmap_add hashmap.c:209
#1 hash_dir_entry_with_parent_and_prefix name-hash.c:302
#2 handle_range_dir name-hash.c:347
#3 handle_range_1 name-hash.c:415
#4 handle_range_dir name-hash.c:380
#5 handle_range_1 name-hash.c:415
#6 lazy_dir_thread_proc name-hash.c:471
#7 <null> <null>
Martin gives instructions for running TSan on test t3008 in this post:
https://public-inbox.org/git/CAN0heSoJDL9pWELD6ciLTmWf-a=oyxe4EXXOmCKvsG5MSuzxsA@mail.gmail.com/
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't reset the strbufs l2 and l3 before use as if they were static, but
release them at the end instead.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using for_each_ref_in() with a full refname has always been
a questionable practice, but it became an error with
b9c8e7f2fb (prefix_ref_iterator: don't trim too much,
2017-05-22), making "git rev-parse --bisect" pretty reliably
show a BUG.
Commit 03df567fbf (for_each_bisect_ref(): don't trim
refnames, 2017-06-18) fixed this case for revision.c, but
rev-parse handles this option on its own. We can use the
same solution here (and piggy-back on its test).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We read the tree objects with fill_tree_descriptor(), but
never actually free the resulting buffers, causing a memory
leak. This isn't a huge deal because we call this code at
most twice per program invocation. But it does potentially
double our heap usage if you have large root trees. Let's
free the trees before returning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on whether we're in --keep mode, git-reset may
feed one or two trees to unpack_trees(). We start a counter
at "1" and then increment it to "2" only for the two-tree
case. But that means we must always subtract one to find the
correct array slot to fill with each descriptor.
Instead, let's start at "0" and just increment our counter
after adding each tree. This skips the extra subtraction,
and will make things much easier when we start to actually
free our tree buffers.
While we're at it, let's make the first allocation use the
slot at "desc + nr", too, even though we know "nr" is 0 at
that point. It makes the two fill_tree_descriptor() calls
consistent (always "desc + nr", followed by always
incrementing "nr").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generate filenames for the user_config ("~/.gitconfig")
and the xdg config ("$XDG_CONFIG_HOME/git/config") and then
decide which to use by looking at the filesystem. But after
selecting one, the unused string is just leaked.
This is a tiny leak, but it creates noise in leak-checker
output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fail to add the cache entry to the index, we end up
just leaking the struct. We should follow the pattern of the
early-return above and free it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After run_diff_files, we throw away the rev_info struct,
including the pathspec that we copied into it, leaking the
memory. this is probably not a big deal in practice. We
usually only run this once per process, and the leak is
proportional to the pathspec list we're already holding in
memory.
But it's still a leak, and it pollutes leak-checker output,
making it harder to find important leaks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that it's safe to declare a "struct lock_file" on the
stack, we can do so (and avoid an intentional leak). These
leaks were found by running t0000 and t0001 under valgrind
(though certainly other similar leaks exist and just don't
happen to be exercised by those tests).
Initializing the lock_file's inner tempfile with NULL is not
strictly necessary in these cases, but it's a good practice
to model. It means that if we were to call a function like
rollback_lock_file() on a lock that was never taken in the
first place, it becomes a quiet noop (rather than undefined
behavior).
Likewise, it's always safe to rollback_lock_file() on a file
that has already been committed or deleted, since that
operation is a noop on an inactive lockfile (and that's why
the case in config.c can drop the "if (lock)" check as we
move away from using a pointer).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit taught the tempfile code to give up
ownership over tempfiles that have been renamed or deleted.
That makes it possible to use a stack variable like this:
struct tempfile t;
create_tempfile(&t, ...);
...
if (!err)
rename_tempfile(&t, ...);
else
delete_tempfile(&t);
But doing it this way has a high potential for creating
memory errors. The tempfile we pass to create_tempfile()
ends up on a global linked list, and it's not safe for it to
go out of scope until we've called one of those two
deactivation functions.
Imagine that we add an early return from the function that
forgets to call delete_tempfile(). With a static or heap
tempfile variable, the worst case is that the tempfile hangs
around until the program exits (and some functions like
setup_shallow_temporary rely on this intentionally, creating
a tempfile and then leaving it for later cleanup).
But with a stack variable as above, this is a serious memory
error: the variable goes out of scope and may be filled with
garbage by the time the tempfile code looks at it. Let's
see if we can make it harder to get this wrong.
Since many callers need to allocate arbitrary numbers of
tempfiles, we can't rely on static storage as a general
solution. So we need to turn to the heap. We could just ask
all callers to pass us a heap variable, but that puts the
burden on them to call free() at the right time.
Instead, let's have the tempfile code handle the heap
allocation _and_ the deallocation (when the tempfile is
deactivated and removed from the list).
This changes the return value of all of the creation
functions. For the cleanup functions (delete and rename),
we'll add one extra bit of safety: instead of taking a
tempfile pointer, we'll take a pointer-to-pointer and set it
to NULL after freeing the object. This makes it safe to
double-call functions like delete_tempfile(), as the second
call treats the NULL input as a noop. Several callsites
follow this pattern.
The resulting patch does have a fair bit of noise, as each
caller needs to be converted to handle:
1. Storing a pointer instead of the struct itself.
2. Passing the pointer instead of taking the struct
address.
3. Handling a "struct tempfile *" return instead of a file
descriptor.
We could play games to make this less noisy. For example, by
defining the tempfile like this:
struct tempfile {
struct heap_allocated_part_of_tempfile {
int fd;
...etc
} *actual_data;
}
Callers would continue to have a "struct tempfile", and it
would be "active" only when the inner pointer was non-NULL.
But that just makes things more awkward in the long run.
There aren't that many callers, so we can simply bite
the bullet and adjust all of them. And the compiler makes it
easy for us to find them all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from uchar[20] to struct object_id continues; this is to
ensure that we do not assume sizeof(struct object_id) is the same
as the length of SHA-1 hash (or length of longest hash we support).
* po/read-graft-line:
commit: rewrite read_graft_line
commit: allocate array using object_id size
commit: replace the raw buffer with strbuf in read_graft_line
sha1_file: fix definition of null_sha1
"branch --set-upstream" that has been deprecated in Git 1.8 has
finally been retired.
* ks/branch-set-upstream:
branch: quote branch/ref names to improve readability
builtin/branch: stop supporting the "--set-upstream" option
t3200: cleanup cruft of a test
Earlier, dddbad728c ("timestamp_t: a new data type for timestamps",
2017-04-26) changed several types to timestamp_t.
5589e87fd8 ("name-rev: change a "long" variable to timestamp_t",
2017-05-20) cleaned up a missed variable, but both missed a _MAX
constant.
Change the remaining constant to the one appropriate for the current
type
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Killing "git merge --edit" before the editor returns control left
the repository in a state with MERGE_MSG but without MERGE_HEAD,
which incorrectly tells the subsequent "git commit" that there was
a squash merge in progress. This has been fixed.
* mg/killed-merge:
merge: save merge state earlier
merge: split write_merge_state in two
merge: clarify call chain
Documentation/git-merge: explain --continue
Code clean-up to avoid mixing values read from the .gitmodules file
and values read from the .git/config file.
* bw/submodule-config-cleanup:
submodule: remove gitmodules_config
unpack-trees: improve loading of .gitmodules
submodule-config: lazy-load a repository's .gitmodules file
submodule-config: move submodule-config functions to submodule-config.c
submodule-config: remove support for overlaying repository config
diff: stop allowing diff to have submodules configured in .git/config
submodule: remove submodule_config callback routine
unpack-trees: don't respect submodule.update
submodule: don't rely on overlayed config when setting diffopts
fetch: don't overlay config with submodule-config
submodule--helper: don't overlay config in update-clone
submodule--helper: don't overlay config in remote_submodule_branch
add, reset: ensure submodules can be added or reset
submodule: don't use submodule_from_name
t7411: check configuration parsing errors
"git interpret-trailers" has been taught a "--parse" and a few
other options to make it easier for scripts to grab existing
trailer lines from a commit log message.
* jk/trailers-parse:
doc/interpret-trailers: fix "the this" typo
pretty: support normalization options for %(trailers)
t4205: refactor %(trailers) tests
pretty: move trailer formatting to trailer.c
interpret-trailers: add --parse convenience option
interpret-trailers: add an option to unfold values
interpret-trailers: add an option to show only existing trailers
interpret-trailers: add an option to show only the trailers
trailer: put process_trailers() options into a struct
"git interpret-trailers" learned to take the trailer specifications
from the command line that overrides the configured values.
* pb/trailers-from-command-line:
interpret-trailers: fix documentation typo
interpret-trailers: add options for actions
trailers: introduce struct new_trailer_item
trailers: export action enums and corresponding lookup functions
The function close_pack_fd() needs to be temporarily made global. Its
scope will be restored to static in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
alloc_packed_git() in packfile.c is duplicated from sha1_file.c. In a
subsequent commit, alloc_packed_git() will be removed from sha1_file.c.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, sha1_file.c and cache.h contain many functions, both related
to and unrelated to packfiles. This makes both files very large and
causes an unclear separation of concerns.
Create a new file, packfile.c, to hold all packfile-related functions
currently in sha1_file.c. It has a corresponding header packfile.h.
In this commit, the pack name-related functions are moved. Subsequent
commits will move the other functions.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup.
* jt/subprocess-handshake:
sub-process: refactor handshake to common function
Documentation: migrate sub-process docs to header
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
Code clean-up.
* rs/move-array:
ls-files: don't try to prune an empty index
apply: use COPY_ARRAY and MOVE_ARRAY in update_image()
use MOVE_ARRAY
add MOVE_ARRAY
"git commit" when seeing an totally empty message said "you did not
edit the message", which is clearly wrong. The message has been
corrected.
* ks/commit-abort-on-empty-message-fix:
commit: check for empty message before the check for untouched template
Numerous bugs in walking of reflogs via "log -g" and friends have
been fixed.
* jk/reflog-walk:
reflog-walk: apply --since/--until to reflog dates
reflog-walk: stop using fake parents
rev-list: check reflog_info before showing usage
get_revision_1(): replace do-while with an early return
log: do not free parents when walking reflog
log: clarify comment about reflog cycles
revision: disallow reflog walking with revs->limited
t1414: document some reflog-walk oddities
"%C(color name)" in the pretty print format always produced ANSI
color escape codes, which was an early design mistake. They now
honor the configuration (e.g. "color.ui = never") and also tty-ness
of the output medium.
* jk/ref-filter-colors:
ref-filter: consult want_color() before emitting colors
pretty: respect color settings for %C placeholders
rev-list: pass diffopt->use_colors through to pretty-print
for-each-ref: load config earlier
color: check color.ui in git_default_config()
ref-filter: pass ref_format struct to atom parsers
ref-filter: factor out the parsing of sorting atoms
ref-filter: make parse_ref_filter_atom a private function
ref-filter: provide a function for parsing sort options
ref-filter: move need_color_reset_at_eol into ref_format
ref-filter: abstract ref format into its own struct
ref-filter: simplify automatic color reset
t: use test_decode_color rather than literal ANSI codes
docs/for-each-ref: update pointer to color syntax
check return value of verify_ref_format()
"git commit" used to discard the index and re-read from the filesystem
just in case the pre-commit hook has updated it in the middle; this
has been optimized out when we know we do not run the pre-commit hook.
* kw/commit-keep-index-when-pre-commit-is-not-run:
commit: skip discarding the index if there is no pre-commit hook
"git rebase", especially when it is run by mistake and ends up
trying to replay many changes, spent long time in silence. The
command has been taught to show progress report when it spends
long time preparing these many changes to replay (which would give
the user a chance to abort with ^C).
* kw/rebase-progress:
rebase: turn on progress option by default for format-patch
format-patch: have progress option while generating patches
Follow the Oxford style, which says to use "up-to-date" before the noun,
but "up to date" after it. Don't change plumbing (specifically
send-pack.c, but transport.c (git push) also has the same string).
This was produced by grepping for "up-to-date" and "up to date". It
turned out we only had to edit in one direction, removing the hyphens.
Fix a typo in Documentation/git-diff-index.txt while we're there.
Reported-by: Jeffrey Manian <jeffrey.manian@gmail.com>
Reported-by: STEVEN WHITE <stevencharleswhitevoices@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the `git merge` process is killed while waiting for the editor to
finish, the merge state is lost but the prepared merge msg and tree is kept.
So, a subsequent `git commit` creates a squashed merge even when the
user asked for proper merge commit originally.
Demonstrate the problem with a test crafted after the in t7502. The test
requires EXECKEEPSPID (thus does not run under MINGW).
Save the merge state earlier (in the non-squash case) so that it does
not get lost. This makes the test pass.
Reported-by: hIpPy <hippy2981@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
