When developing another patch series I had a temporary state in
which git-clone would segfault, when the call was prepared in
prepare_to_clone_next_submodule. This lead to the call failing,
i.e. in `update_clone_task_finished` the task was scheduled to be
tried again. The second call to prepare_to_clone_next_submodule
would return 0, as the segfaulted clone did create the .git file
already, such that was not considered to need to be cloned again. I
was seeing the "BUG: ce was a submodule before?\n" message, which
was the correct behavior at the time as my local code was
buggy. When trying to debug this failure, I tried to use printing
messages into the strbuf that is passed around, but these messages
were never printed as the die(..) doesn't flush the `err` strbuf.
When implementing the die() in 665b35ecc (2016-06-09, "submodule--helper:
initial clone learns retry logic"), I considered this condition to be
a severe condition, which should lead to an immediate abort as we do not
trust ourselves any more. However the queued messages in `err` are valuable
so let's not toss them out by immediately dying, but a graceful return.
Another thing to note: The error message itself was misleading. A return
value of 0 doesn't indicate the passed in `ce` is not a submodule any more,
but just that we do not consider cloning it any more.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Repeating the definition of a static variable seems to be valid in C.
Nevertheless, it is bad style because it can cause confusion, definitely
when it becomes necessary to change the type.
d64ec16 (git config: reorganize to use parseopt, 2009-02-21) added two
static variables near the top of the file config.c without removing the
definitions of the two variables that occurs later in the file.
The two variables were needed earlier in the file in the newly
introduced parseopt structure. These references were removed later in
d0e08d6 (config: fix parsing of "git config --get-color some.key -1",
2014-11-20).
Remove the redundant, younger, definitions near the top of the file and
keep the original definitions that occur later.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" has a few options that tell it not to pack
objects found in certain packfiles, which require it to scan .idx
files of all available packs. The codepaths involved in these
operations have been optimized for a common case of not having any
non-local pack and/or any .kept pack.
* jk/pack-objects-optim:
pack-objects: compute local/ignore_pack_keep early
pack-objects: break out of want_object loop early
find_pack_entry: replace last_found_pack with MRU cache
add generic most-recently-used list
sha1_file: drop free_pack_by_name
t/perf: add tests for many-pack scenarios
The reflog output format is documented better, and a new format
--date=unix to report the seconds-since-epoch (without timezone)
has been added.
* jk/reflog-date:
date: clarify --date=raw description
date: add "unix" format
date: document and test "raw-local" mode
doc/pretty-formats: explain shortening of %gd
doc/pretty-formats: describe index/time formats for %gd
doc/rev-list-options: explain "-g" output formats
doc/rev-list-options: clarify "commit@{Nth}" for "-g" option
"git pack-objects" and "git index-pack" mostly operate with off_t
when talking about the offset of objects in a packfile, but there
were a handful of places that used "unsigned long" to hold that
value, leading to an unintended truncation.
* nd/pack-ofs-4gb-limit:
fsck: use streaming interface for large blobs in pack
pack-objects: do not truncate result in-pack object size on 32-bit systems
index-pack: correct "offset" type in unpack_entry_data()
index-pack: report correct bad object offsets even if they are large
index-pack: correct "len" type in unpack_data()
sha1_file.c: use type off_t* for object_info->disk_sizep
pack-objects: pass length to check_pack_crc() without truncation
"git blame file" allowed the lineage of lines in the uncommitted,
unadded contents of "file" to be inspected, but it refused when
"file" did not appear in the current commit. When "file" was
created by renaming an existing file (but the change has not been
committed), this restriction was unnecessarily tight.
* mh/blame-worktree:
t/t8003-blame-corner-cases.sh: Use here documents
blame: allow to blame paths freshly added to the index
When calling `rename("dir", "non-existing-dir/")` on Linux, it silently
succeeds, stripping the trailing slash of the second argument.
This is all good and dandy but this behavior disagrees with the specs at
http://pubs.opengroup.org/onlinepubs/9699919799/functions/rename.html
that state clearly regarding the 2nd parameter (called `new`):
If the `new` argument does not resolve to an existing directory
entry for a file of type directory and the `new` argument
contains at least one non- <slash> character and ends with one
or more trailing <slash> characters after all symbolic links
have been processed, `rename()` shall fail.
Of course, we would like `git mv dir non-existing-dir/` to succeed (and
rename the directory "dir" to "non-existing-dir"). Let's be extra
careful to remove the trailing slash in that case.
This lets t7001-mv.sh pass in Bash on Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter and a bit more efficient.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update --porcelain argument to take optional version parameter
to allow multiple porcelain formats to be supported in the future.
The token "v1" is the default value and indicates the traditional
porcelain format. (The token "1" is an alias for that.)
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the API between builtin/commit.c and wt-status.[ch].
Hide the details of the various wt_*status_print() routines inside
wt-status.c behind a single (new) wt_status_print() routine.
Eliminate the switch statements from builtin/commit.c.
Allow details of new status formats to be isolated within wt-status.c
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the various wt_status_print*() routines to be
wt_longstatus_print*() to make it clear that these
routines are only concerned with the normal/long
status output and reduce developer confusion as other
status formats are added in the future.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call string_list_split() for cutting a space separated list into pieces
instead of reimplementing it based on struct strategy. The attr member
of struct strategy was not used split_merge_strategies(); it was a pure
string operation. Also be nice and clean up once we're done splitting;
the old code didn't bother freeing any of the allocated memory.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Initialize struct child_process variables already when they're defined.
That's shorter and saves a function call.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_addstr() for adding a simple string to a strbuf instead of
using the heavier strbuf_addf(). This is shorter and documents the
intent more clearly.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier tweak to make "submodule update" retry a failing clone
of submodules was buggy and caused segfault, which has been fixed.
* sb/submodule-clone-retry:
submodule-helper: fix indexing in clone retry error reporting path
git-submodule: forward exit code of git-submodule--helper more faithfully
Gerrit has a "superproject subscription" feature[1], that triggers a
commit in a superproject that is subscribed to its submodules.
Conceptually this Gerrit feature can be done on the client side with
Git via (except for raciness, error handling etc):
while [ true ]; do
git -C <superproject> submodule update --remote --force
git -C <superproject> commit -a -m "Update submodules"
git -C <superproject> push
done
for each branch in the superproject. To ease the configuration in Gerrit
a special value of "." has been introduced for the submodule.<name>.branch
to mean the same branch as the superproject[2], such that you can create a
new branch on both superproject and the submodule and this feature
continues to work on that new branch.
Now we find projects in the wild with such a .gitmodules file.
The .gitmodules used in these Gerrit projects do not conform
to Gits understanding of how .gitmodules should look like.
This teaches Git to deal gracefully with this syntax as well.
The redefinition of "." does no harm to existing projects unaware of
this change, as "." is an invalid branch name in Git, so we do not
expect such projects to exist.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we want to enhance the logic for the branch selection.
Rewrite the current logic to be in C, so we can directly use C when
we enhance the logic.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" and "git clone" learned to give better progress meters
to the end user who is waiting on the terminal.
* jk/push-progress:
receive-pack: send keepalives during quiet periods
receive-pack: turn on connectivity progress
receive-pack: relay connectivity errors to sideband
receive-pack: turn on index-pack resolving progress
index-pack: add flag for showing delta-resolution progress
clone: use a real progress meter for connectivity check
check_connected: add progress flag
check_connected: relay errors to alternate descriptor
check_everything_connected: use a struct with named options
check_everything_connected: convert to argv_array
rev-list: add optional progress reporting
check_everything_connected: always pass --quiet to rev-list
Users of the parse_options_concat() API function need to allocate
extra slots in advance and fill them with OPT_END() when they want
to decide the set of supported options dynamically, which makes the
code error-prone and hard to read. This has been corrected by tweaking
the API to allocate and return a new copy of "struct option" array.
* jk/parse-options-concat:
parse_options: allocate a new array when concatenating
"git push" learned to accept and pass extra options to the
receiving end so that hooks can read and react to them.
* sb/push-options:
add a test for push options
push: accept push options
receive-pack: implement advertising and receiving push options
push options: {pre,post}-receive hook learns about push options
"git commit --help" said "--no-verify" is only about skipping the
pre-commit hook, and failed to say that it also skipped the
commit-msg hook.
* os/no-verify-skips-commit-msg-too:
commit: describe that --no-verify skips the commit-msg hook in the help text
This strdup was added as part of 58dbfa2 (blame: accept
multiple -L ranges, 2013-08-06) to be consistent with
parse_opt_string_list(), which appends to the same list.
But as of 7a7a517 (parse_opt_string_list: stop allocating
new strings, 2016-06-13), we should stop using strdup (to
match parse_opt_string_list, and for all the reasons
described in that commit; namely that it does nothing useful
and causes us to leak the memory).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we compute the date to go in author/committer lines of
commits, or tagger lines of tags, we get the current date
once and then cache it for the rest of the program. This is
a good thing in some cases, like "git commit", because it
means we do not racily assign different times to the
author/committer fields of a single commit object.
But as more programs start to make many commits in a single
process (e.g., the recently builtin "git am"), it means that
you'll get long strings of commits with identical committer
timestamps (whereas before, we invoked "git commit" many
times and got true timestamps).
This patch addresses it by letting callers reset the cached
time, which means they'll get a fresh time on their next
call to git_committer_info() or git_author_info(). The first
caller to do so is "git am", which resets the time for each
patch it applies.
It would be nice if we could just do this automatically
before filling in the ident fields of commit and tag
objects. Unfortunately, it's hard to know where a particular
logical operation begins and ends.
For instance, if commit_tree_extended() were to call
reset_ident_date() before getting the committer/author
ident, that doesn't quite work; sometimes the author info is
passed in to us as a parameter, and it may or may not have
come from a previous call to ident_default_date(). So in
those cases, we lose the property that the committer and the
author timestamp always match.
You could similarly put a date-reset at the end of
commit_tree_extended(). That actually works in the current
code base, but it's fragile. It makes the assumption that
after commit_tree_extended() finishes, the caller has no
other operations that would logically want to fall into the
same timestamp.
So instead we provide the tool to easily do the reset, and
let the high-level callers use it to annotate their own
logical operations.
There's no automated test, because it would be inherently
racy (it depends on whether the program takes multiple
seconds to run). But you can see the effect with something
like:
# make a fake 100-patch series
top=$(git rev-parse HEAD)
bottom=$(git rev-list --first-parent -100 HEAD | tail -n 1)
git log --format=email --reverse --first-parent \
--binary -m -p $bottom..$top >patch
# now apply it; this presumably takes multiple seconds
git checkout --detach $bottom
git am <patch
# now count the number of distinct committer times;
# prior to this patch, there would only be one, but
# now we'd typically see several.
git log --format=%ct $bottom.. | sort -u
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Helped-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Internally we call the underscore version of relative_path, but externally
we present an API with no underscores.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace uses of strbuf_addf() for adding strings with more lightweight
strbuf_addstr() calls.
In http-push.c it becomes easier to see what's going on without having
to verfiy that the definition of PROPFIND_ALL_REQUEST doesn't contain
any format specifiers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps users who would prefer format-patch to default to --from,
and makes it easier to change the default in the future.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recursive merge machinery accumulates its output in an output
buffer, to be flushed at the end of merge_recursive(). At this point,
we forgot to release the output buffer.
When calling merge_trees() (i.e. the non-recursive part of the recursive
merge) directly, the output buffer is never flushed because the caller
may be merge_recursive() which wants to flush the output itself.
For the same reason, merge_trees() cannot release the output buffer: it
may still be needed.
Forgetting to release the output buffer did not matter much when running
git-checkout, or git-merge-recursive, because we exited after the
operation anyway. Ever since cherry-pick learned to pick a commit range,
however, this memory leak had the potential of becoming a problem.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In want_object_in_pack(), we can exit early from our loop if
neither "local" nor "ignore_pack_keep" are set. If they are,
however, we must examine each pack to see if it has the
object and is non-local or has a ".keep".
It's quite common for there to be no non-local or .keep
packs at all, in which case we know ahead of time that
looking further will be pointless. We can pre-compute this
by simply iterating over the list of packs ahead of time,
and dropping the flags if there are no packs that could
match.
Another similar strategy would be to modify the loop in
want_object_in_pack() to notice that we have already found
the object once, and that we are looping only to check for
"local" and "keep" attributes. If a pack has neither of
those, we can skip the call to find_pack_entry_one(), which
is the expensive part of the loop.
This has two advantages:
- it isn't all-or-nothing; we still get some improvement
when there's a small number of kept or non-local packs,
and a large number of non-kept local packs
- it eliminates any possible race where we add new
non-local or kept packs after our initial scan. In
practice, I don't think this race matters; we already
cache the packed_git information, so somebody who adds a
new pack or .keep file after we've started will not be
noticed at all, unless we happen to need to call
reprepare_packed_git() because a lookup fails.
In other words, we're already racy, and the race is not
a big deal (losing the race means we might include an
object in the pack that would not otherwise be, which is
an acceptable outcome).
However, it also has a disadvantage: we still loop over the
rest of the packs for each object to check their flags. This
is much less expensive than doing the object lookup, but
still not free. So if we wanted to implement that strategy
to cover the non-all-or-nothing cases, we could do so in
addition to this one (so you get the most speedup in the
all-or-nothing case, and the best we can do in the other
cases). But given that the all-or-nothing case is likely the
most common, it is probably not worth the trouble, and we
can revisit this later if evidence points otherwise.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pack-objects collects the list of objects to pack
(either from stdin, or via its internal rev-list), it
filters each one through want_object_in_pack().
This function loops through each existing packfile, looking
for the object. When we find it, we mark the pack/offset
combo for later use. However, we can't just return "yes, we
want it" at that point. If --honor-pack-keep is in effect,
we must keep looking to find it in _all_ packs, to make sure
none of them has a .keep. Likewise, if --local is in effect,
we must make sure it is not present in any non-local pack.
As a result, the sum effort of these calls is effectively
O(nr_objects * nr_packs). In an ordinary repository, we have
only a handful of packs, and this doesn't make a big
difference. But in pathological cases, it can slow the
counting phase to a crawl.
This patch notices the case that we have neither "--local"
nor "--honor-pack-keep" in effect and breaks out of the loop
early, after finding the first instance. Note that our worst
case is still "objects * packs" (i.e., we might find each
object in the last pack we look in), but in practice we will
often break out early. On an "average" repo, my git.git with
8 packs, this shows a modest 2% (a few dozen milliseconds)
improvement in the counting-objects phase of "git
pack-objects --all <foo" (hackily instrumented by sticking
exit(0) right after list_objects).
But in a much more pathological case, it makes a bigger
difference. I ran the same command on a real-world example
with ~9 million objects across 1300 packs. The counting time
dropped from 413s to 45s, an improvement of about 89%.
Note that this patch won't do anything by itself for a
normal "git gc", as it uses both --honor-pack-keep and
--local.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame -M" missed a single line that was moved within the file.
* dk/blame-move-no-reason-for-1-line-context:
blame: require 0 context lines while finding moved lines with -M
One part of "git am" had an oddball helper function that called
stuff from outside "his" as opposed to calling what we have "ours",
which was not gender-neutral and also inconsistent with the rest of
the system where outside stuff is usuall called "theirs" in
contrast to "ours".
* js/am-call-theirs-theirs-in-fallback-3way:
am: counteract gender bias
"gc.autoPackLimit" when set to 1 should not trigger a repacking
when there is only one pack, but the code counted poorly and did
so.
* ew/gc-auto-pack-limit-fix:
gc: fix off-by-one error with gc.autoPackLimit
Git does not know what the contents in the index should be for a
path added with "git add -N" yet, so "git grep --cached" should not
show hits (or show lack of hits, with -L) in such a path, but that
logic does not apply to "git grep", i.e. searching in the working
tree files. But we did so by mistake, which has been corrected.
* nd/ita-cleanup:
grep: fix grepping for "intent to add" files
t7810-grep.sh: fix a whitespace inconsistency
t7810-grep.sh: fix duplicated test name
A helper function that takes the contents of a commit object and
finds its subject line did not ignore leading blank lines, as is
commonly done by other codepaths. Make it ignore leading blank
lines to match.
* js/find-commit-subject-ignore-leading-blanks:
reset --hard: skip blank lines when reporting the commit subject
sequencer: use skip_blank_lines() to find the commit subject
commit -C: skip blank lines at the beginning of the message
commit.c: make find_commit_subject() more robust
pretty: make the skip_blank_lines() function public
"git pack-objects" and "git index-pack" mostly operate with off_t
when talking about the offset of objects in a packfile, but there
were a handful of places that used "unsigned long" to hold that
value, leading to an unintended truncation.
* nd/pack-ofs-4gb-limit:
fsck: use streaming interface for large blobs in pack
pack-objects: do not truncate result in-pack object size on 32-bit systems
index-pack: correct "offset" type in unpack_entry_data()
index-pack: report correct bad object offsets even if they are large
index-pack: correct "len" type in unpack_data()
sha1_file.c: use type off_t* for object_info->disk_sizep
pack-objects: pass length to check_pack_crc() without truncation
"git worktree prune" protected worktrees that are marked as
"locked" by creating a file in a known location. "git worktree"
command learned a dedicated command pair to create and remove such
a file, so that the users do not have to do this with editor.
* nd/worktree-lock:
worktree.c: find_worktree() search by path suffix
worktree: add "unlock" command
worktree: add "lock" command
worktree.c: add is_worktree_locked()
worktree.c: add is_main_worktree()
worktree.c: add find_worktree()
Mark comment displayed when editing a note for translation.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have "--date=raw", which is a Unix epoch
timestamp plus a contextual timezone (either the author's or
the local). But one may not care about the timezone and just
want the epoch timestamp by itself. It's not hard to parse
the two apart, but if you are using a pretty-print format,
you may want git to show the "finished" form that the user
will see.
We can accomodate this by adding a new date format, "unix",
which is basically "raw" without the timezone.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This brings the short help in line with the documentation.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Last October, we had to change this code to run `git merge-recursive`
in a child process: git-am wants to print some helpful advice when the
merge failed, but the code in question was not prepared to return, it
die()d instead.
We are finally at a point when the code *is* prepared to return errors,
and can avoid the child process again.
This reverts commit c63d4b2 (am -3: do not let failed merge from
completing the error codepath, 2015-10-09), with the necessary changes
to adjust for the fact that Git's source code changed in the meantime
(such as: using OIDs instead of hashes in the recursive merge, and a
removed gender bias).
Note: the code now calls merge_recursive_generic() again. Unlike
merge_trees() and merge_recursive(), this function returns 0 upon success,
as most of Git's functions. Therefore, the error value -1 naturally is
handled correctly, and we do not have to take care of it specifically.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, callers of merge_trees() or merge_recursive() expected that
code to die() with an error message. This used to be okay because we
called those commands from scripts, and had a chance to print out a
message in case the command failed fatally (read: with exit code 128).
As scripting incurs its own set of problems (portability, speed,
idiosyncrasies of different shells, limited data structures leading to
inefficient code), we are converting more and more of these scripts into
builtins, using library functions directly.
We already tried to use merge_recursive() directly in the builtin
git-am, for example. Unfortunately, we had to roll it back temporarily
because some of the code in merge-recursive.c still deemed it okay to
call die(), when the builtin am code really wanted to print out a useful
advice after the merge failed fatally. In the next commits, we want to
fix that.
The code touched by this commit expected merge_trees() to die() with
some useful message when there is an error condition, but merge_trees()
is going to be improved by converting all die() calls to return error()
instead (i.e. return value -1 after printing out the message as before),
so that the caller can react more flexibly.
This is a step to prepare for the version of merge_trees() that no
longer dies, even if we just imitate the previous behavior by calling
exit(128): this is what callers of e.g. `git merge` have come to expect.
Note that the callers of the sequencer (revert and cherry-pick) already
fail fast even for the return value -1; The only difference is that they
now get a chance to say "<command> failed".
A caller of merge_trees() might want handle error messages themselves
(or even suppress them). As this patch is already complex enough, we
leave that change for a later patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vast majority of error messages in Git's source code which report a
bug use the convention to prefix the message with "BUG:".
As part of cleaning up merge-recursive to stop die()ing except in case of
detected bugs, let's just make the remainder of the bug reports consistent
with the de facto rule.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame file" allowed the lineage of lines in the uncommitted,
unadded contents of "file" to be inspected, but it refused when
"file" did not appear in the current commit. When "file" was
created by renaming an existing file (but the change has not been
committed), this restriction was unnecessarily tight.
* mh/blame-worktree:
t/t8003-blame-corner-cases.sh: Use here documents
blame: allow to blame paths freshly added to the index
When "git fsck" reports a broken link (e.g. a tree object contains
a blob that does not exist), both containing object and the object
that is referred to were reported with their 40-hex object names.
The command learned the "--name-objects" option to show the path to
the containing object from existing refs (e.g. "HEAD~24^2:file.txt").
* js/fsck-name-object:
fsck: optionally show more helpful info for broken links
fsck: give the error function a chance to see the fsck_options
fsck_walk(): optionally name objects on the go
fsck: refactor how to describe objects
The use of strbuf in "git rm" to build filename to remove was a bit
suboptimal, which has been fixed.
* rs/rm-strbuf-optim:
rm: reuse strbuf for all remove_dir_recursively() calls
The API to iterate over all the refs (i.e. for_each_ref(), etc.)
has been revamped.
* mh/ref-iterators:
for_each_reflog(): reimplement using iterators
dir_iterator: new API for iterating over a directory tree
for_each_reflog(): don't abort for bad references
do_for_each_ref(): reimplement using reference iteration
refs: introduce an iterator interface
ref_resolves_to_object(): new function
entry_resolves_to_object(): rename function from ref_resolves_to_object()
get_ref_cache(): only create an instance if there is a submodule
remote rm: handle symbolic refs correctly
delete_refs(): add a flags argument
refs: use name "prefix" consistently
do_for_each_ref(): move docstring to the header file
refs: remove unnecessary "extern" keywords
Further preparatory work on the refs API before the pluggable
backend series can land.
* mh/split-under-lock: (33 commits)
lock_ref_sha1_basic(): only handle REF_NODEREF mode
commit_ref_update(): remove the flags parameter
lock_ref_for_update(): don't resolve symrefs
lock_ref_for_update(): don't re-read non-symbolic references
refs: resolve symbolic refs first
ref_transaction_update(): check refname_is_safe() at a minimum
unlock_ref(): move definition higher in the file
lock_ref_for_update(): new function
add_update(): initialize the whole ref_update
verify_refname_available(): adjust constness in declaration
refs: don't dereference on rename
refs: allow log-only updates
delete_branches(): use resolve_refdup()
ref_transaction_commit(): correctly report close_ref() failure
ref_transaction_create(): disallow recursive pruning
refs: make error messages more consistent
lock_ref_sha1_basic(): remove unneeded local variable
read_raw_ref(): move docstring to header file
read_raw_ref(): improve docstring
read_raw_ref(): rename symref argument to referent
...
'git submodule--helper update-clone' has logic to retry failed clones
a second time. For this purpose, there is a list of submodules to clone,
and a second list that is filled with the submodules to retry. Within
these lists, the submodules are identified by an index as if both lists
were just appended.
This works nicely except when the second clone attempt fails as well. To
report an error, the identifying index must be adjusted by an offset so
that it can be used as an index into the second list. However, the
calculation uses the logical total length of the lists so that the result
always points one past the end of the second list.
Pick the correct index.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After a client has sent us the complete pack, we may spend
some time processing the data and running hooks. If the
client asked us to be quiet, receive-pack won't send any
progress data during the index-pack or connectivity-check
steps. And hooks may or may not produce their own progress
output. In these cases, the network connection is totally
silent from both ends.
Git itself doesn't care about this (it will wait forever),
but other parts of the system (e.g., firewalls,
load-balancers, etc) might hang up the connection. So we'd
like to send some sort of keepalive to let the network and
the client side know that we're still alive and processing.
We can use the same trick we did in 05e9515 (upload-pack:
send keepalive packets during pack computation, 2013-09-08).
Namely, we will send an empty sideband data packet every `N`
seconds that we do not relay any stderr data over the
sideband channel. As with 05e9515, this means that we won't
bother sending keepalives when there's actual progress data,
but will kick in when it has been disabled (or if there is a
lull in the progress data).
The concept is simple, but the details are subtle enough
that they need discussing here.
Before the client sends us the pack, we don't want to do any
keepalives. We'll have sent our ref advertisement, and we're
waiting for them to send us the pack (and tell us that they
support sidebands at all).
While we're receiving the pack from the client (or waiting
for it to start), there's no need for keepalives; it's up to
them to keep the connection active by sending data.
Moreover, it would be wrong for us to do so. When we are the
server in the smart-http protocol, we must treat our
connection as half-duplex. So any keepalives we send while
receiving the pack would potentially be buffered by the
webserver. Not only does this make them useless (since they
would not be delivered in a timely manner), but it could
actually cause a deadlock if we fill up the buffer with
keepalives. (It wouldn't be wrong to send keepalives in this
phase for a full-duplex connection like ssh; it's simply
pointless, as it is the client's responsibility to speak).
As soon as we've gotten all of the pack data, then the
client is waiting for us to speak, and we should start
keepalives immediately. From here until the end of the
connection, we send one any time we are not otherwise
sending data.
But there's a catch. Receive-pack doesn't know the moment
we've gotten all the data. It passes the descriptor to
index-pack, who reads all of the data, and then starts
resolving the deltas. We have to communicate that back.
To make this work, we instruct the sideband muxer to enable
keepalives in three phases:
1. In the beginning, not at all.
2. While reading from index-pack, wait for a signal
indicating end-of-input, and then start them.
3. Afterwards, always.
The signal from index-pack in phase 2 has to come over the
stderr channel which the muxer is reading. We can't use an
extra pipe because the portable run-command interface only
gives us stderr and stdout.
Stdout is already used to pass the .keep filename back to
receive-pack. We could also send a signal there, but then we
would find out about it in the main thread. And the
keepalive needs to be done by the async muxer thread (since
it's the one writing sideband data back to the client). And
we can't reliably signal the async thread from the main
thread, because the async code sometimes uses threads and
sometimes uses forked processes.
Therefore the signal must come over the stderr channel,
where it may be interspersed with other random
human-readable messages from index-pack. This patch makes
the signal a single NUL byte. This is easy to parse, should
not appear in any normal stderr output, and we don't have to
worry about any timing issues (like seeing half the signal
bytes in one read(), and half in a subsequent one).
This is a bit ugly, but it's simple to code and should work
reliably.
Another option would be to stop using an async thread for
muxing entirely, and just poll() both stderr and stdout of
index-pack from the main thread. This would work for
index-pack (because we aren't doing anything useful in the
main thread while it runs anyway). But it would make the
connectivity check and the hook muxers much more
complicated, as they need to simultaneously feed the
sub-programs while reading their stderr.
The index-pack phase is the only one that needs this
signaling, so it could simply behave differently than the
other two. That would mean having two separate
implementations of copy_to_sideband (and the keepalive
code), though. And it still doesn't get rid of the
signaling; it just means we can write a nicer message like
"END_OF_INPUT" or something on stdout, since we don't have
to worry about separating it from the stderr cruft.
One final note: this signaling trick is only done with
index-pack, not with unpack-objects. There's no point in
doing it for the latter, because by definition it only kicks
in for a small number of objects, where keepalives are not
as useful (and this conveniently lets us avoid duplicating
the implementation).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we receive a large push, the server side of the
connection may spend a lot of time (30s or more for a full
push of linux.git) walking the object graph without
producing any output. Let's give the user some indication
that we're actually working.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the connectivity check encounters a problem when
receiving a push, the error output goes to receive-pack's
stderr, whose destination depends on the protocol used
(ssh tends to send it to the user, though without a "remote"
prefix; http will generally eat it in the server's error
log).
The information should consistently go back to the user, as
there is a reasonable chance their client is buggy and
generating a bad pack.
We can do so by muxing it over the sideband as we do with
other sub-process stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we receive a large push, the server side may have to
spend a lot of CPU processing the incoming packfile.
During the "receiving" phase, we are typically network
bound, and the client is writing its own progress to the
user. But during the delta resolution phase, we may spend
minutes (e.g., for a full push of linux.git) without
making any indication to the user that the connection has
not hung.
Let's ask index-pack to produce progress output for this
phase (unless the client asked us to be quiet, of course).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index-pack command has two progress meters: one for
"receiving objects", and one for "resolving deltas". You get
neither by default, or both with "-v".
But for a push through receive-pack, we would want only the
"resolving deltas" phase, _not_ the "receiving objects"
progress. There are two reasons for this.
One is simply that existing clients are already printing
"writing objects" progress at the same time. Arguably
"receiving" from the far end is more useful, because it
tells you what has actually gotten there, as opposed to what
might be stuck in a buffer somewhere between the client and
server. But that would require a protocol extension to tell
clients not to print their progress. Possible, but
complexity for little gain.
The second reason is much more important. In a full-duplex
connection like git-over-ssh, we can print progress while
the pack is incoming, and it will immediately get to the
client. But for a half-duplex connection like git-over-http,
we should not say anything until we have received the full
request. Anything we write is subject to being stuck in a
buffer by the webserver. Worse, we can end up in a deadlock
if that buffer fills up.
So our best bet is to avoid writing anything that isn't a
small fixed size until we've received the full pack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the initial connectivity check for a cloned
repository can be slow, 0781aa4 (clone: let the user know
when check_everything_connected is run, 2013-05-03) added a
"fake" progress meter; we simply say "Checking connectivity"
when it starts, and "done" at the end, with nothing between.
Since check_connected() now knows how to do a real progress
meter, we can drop our fake one and use that one instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The number of variants of check_everything_connected has
grown over the years, so that the "real" function takes
several possibly-zero, possibly-NULL arguments. We hid the
complexity behind some wrapper functions, but this doesn't
scale well when we want to add new options.
If we add more wrapper variants to handle the new options,
then we can get a combinatorial explosion when those options
might be used together (right now nobody wants to use both
"shallow" and "transport" together, so we get by with just a
few wrappers).
If instead we add new parameters to each function, each of
which can have a default value, then callers who want the
defaults end up with confusing invocations like:
check_everything_connected(fn, 0, data, -1, 0, NULL);
where it is unclear which parameter is which (and every
caller needs updated when we add new options).
Instead, let's add a struct to hold all of the optional
parameters. This is a little more verbose for the callers
(who have to declare the struct and fill it in), but it
makes their code much easier to follow, because every option
is named as it is set (and unused options do not have to be
mentioned at all).
Note that we could also stick the iteration function and its
callback data into the option struct, too. But since those
are required for each call, by avoiding doing so, we can let
very simple callers just pass "NULL" for the options and not
worry about the struct at all.
While we're touching each site, let's also rename the
function to check_connected(). The existing name was quite
long, and not all of the wrappers even used the full name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's easy to ask rev-list to do a traversal that may takes
many seconds (e.g., by calling "--objects --all"). In theory
you can monitor its progress by the output you get to
stdout, but this isn't always easy.
Some operations, like "--count", don't make any output until
the end.
And some callers, like check_everything_connected(), are
using it just for the error-checking of the traversal, and
throw away stdout entirely.
This patch adds a "--progress" option which can be used to
give some eye-candy for a user waiting for a long traversal.
This is just a rev-list option and not a regular traversal
option, because it needs cooperation from the callbacks in
builtin/rev-list.c to do the actual count.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One part of "git am" had an oddball helper function that called
stuff from outside "his" as opposed to calling what we have "ours",
which was not gender-neutral and also inconsistent with the rest of
the system where outside stuff is usuall called "theirs" in
contrast to "ours".
* js/am-call-theirs-theirs-in-fallback-3way:
am: counteract gender bias
General code clean-up around a helper function to write a
single-liner to a file.
* jk/write-file:
branch: use write_file_buf instead of write_file
use write_file_buf where applicable
write_file: add format attribute
write_file: add pointer+len variant
write_file: use xopen
write_file: drop "gently" form
branch: use non-gentle write_file for branch description
am: ignore return value of write_file()
config: fix bogus fd check when setting up default config
Code clean-up to avoid using a variable string that compilers may
feel untrustable as printf-style format given to write_file()
helper function.
* jk/printf-format:
commit.c: remove print_commit_list()
avoid using sha1_to_hex output as printf format
walker: let walker_say take arbitrary formats
Improve the look of the way "git fetch" reports what happened to
each ref that was fetched.
* nd/fetch-ref-summary:
fetch: reduce duplicate in ref update status lines with placeholder
fetch: align all "remote -> local" output
fetch: change flag code for displaying tag update and deleted ref
fetch: refactor ref update status formatting code
git-fetch.txt: document fetch output
The commands in the "log/diff" family have had an FILE* pointer in the
data structure they pass around for a long time, but some codepaths
used to always write to the standard output. As a preparatory step
to make "git format-patch" available to the internal callers, these
codepaths have been updated to consistently write into that FILE*
instead.
* js/log-to-diffopt-file:
mingw: fix the shortlog --output=<file> test
diff: do not color output when --color=auto and --output=<file> is given
t4211: ensure that log respects --output=<file>
shortlog: respect the --output=<file> setting
format-patch: use stdout directly
format-patch: avoid freopen()
format-patch: explicitly switch off color when writing to files
shortlog: support outputting to streams other than stdout
graph: respect the diffopt.file setting
line-log: respect diffopt's configured output file stream
log-tree: respect diffopt's configured output file stream
log: prepare log/log-tree to reuse the diffopt.close_file attribute
"git blame -M" missed a single line that was moved within the file.
* dk/blame-move-no-reason-for-1-line-context:
blame: require 0 context lines while finding moved lines with -M
When reporting broken links between commits/trees/blobs, it would be
quite helpful at times if the user would be told how the object is
supposed to be reachable.
With the new --name-objects option, git-fsck will try to do exactly
that: name the objects in a way that shows how they are reachable.
For example, when some reflog got corrupted and a blob is missing that
should not be, the user might want to remove the corresponding reflog
entry. This option helps them find that entry: `git fsck` will now
report something like this:
broken link from tree b5eb6ff... (refs/stash@{<date>}~37:)
to blob ec5cf80...
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When blaming files, changes in the work tree are taken into account
and displayed as being "Not Committed Yet".
However, when blaming a file that is not known to the current HEAD,
git blame fails with `no such path 'foo' in HEAD`, even when the file
was git add'ed.
Allowing such a blame is useful when the new file added to the index
(not yet committed) was created by renaming an existing file. It
also is useful when the new file was created from pieces already in
HEAD, moved or copied from other files and blaming with copy
detection (i.e. "-C").
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will need this in the next commit, where fsck will be taught to
optionally name the objects when reporting issues about them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many places, we refer to objects via their SHA-1s. Let's abstract
that into a function.
For the moment, it does nothing else than what we did previously: print
out the 40-digit hex string. But that will change over the course of the
next patches.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This implements everything that is required on the client side to make use
of push options from the porcelain push command.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pre/post receive hook may be interested in more information from the
user. This information can be transmitted when both client and server
support the "push-options" capability, which when used is a phase directly
after update commands ended by a flush pkt.
Similar to the atomic option, the server capability can be disabled via
the `receive.advertisePushOptions` config variable. While documenting
this, fix a nit in the `receive.advertiseAtomic` wording.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The environment variable GIT_PUSH_OPTION_COUNT is set to the number of
push options sent, and GIT_PUSH_OPTION_{0,1,..} is set to the transmitted
option.
The code is not executed as the push options are set to NULL, nor is the
new capability advertised.
There was some discussion back and forth how to present these push options
to the user as there are some ways to do it:
Keep all options in one environment variable
============================================
+ easiest way to implement in Git
- This would make things hard to parse correctly in the hook.
Put the options in files instead,
filenames are in GIT_PUSH_OPTION_FILES
======================================
+ After a discussion about environment variables and shells, we may not
want to put user data into an environment variable (see [1] for example).
+ We could transmit binaries, i.e. we're not bound to C strings as
we are when using environment variables to the user.
+ Maybe easier to parse than constructing environment variable names
GIT_PUSH_OPTION_{0,1,..} yourself
- cleanup of the temporary files is hard to do reliably
- we have race conditions with multiple clients pushing, hence we'd need
to use mkstemp. That's not too bad, but still.
Use environment variables, but restrict to key/value pairs
==========================================================
(When the user pushes a push option `foo=bar`, we'd
GIT_PUSH_OPTION_foo=bar)
+ very easy to parse for a simple model of push options
- it's not sufficient for more elaborate models, e.g.
it doesn't allow doubles (e.g. cc=reviewer@email)
Present the options in different environment variables
======================================================
(This is implemented)
* harder to parse as a user, but we have a sample hook for that.
- doesn't allow binary files
+ allows the same option twice, i.e. is not restrictive about
options, except for binary files.
+ doesn't clutter a remote directory with (possibly stale)
temporary files
As we first want to focus on getting simple strings to work
reliably, we go with the last option for now. If we want to
do transmission of binaries later, we can just attach a
'side-channel', e.g. "any push option that contains a '\0' is
put into a file instead of the environment variable and we'd
have new GIT_PUSH_OPTION_FILES, GIT_PUSH_OPTION_FILENAME_{0,1,..}
environment variables".
[1] 'Shellshock' https://lwn.net/Articles/614218/
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git does not know what the contents in the index should be for a
path added with "git add -N" yet, so "git grep --cached" should not
show hits (or show lack of hits, with -L) in such a path, but that
logic does not apply to "git grep", i.e. searching in the working
tree files. But we did so by mistake, which has been corrected.
* nd/ita-cleanup:
grep: fix grepping for "intent to add" files
t7810-grep.sh: fix a whitespace inconsistency
t7810-grep.sh: fix duplicated test name
"gc.autoPackLimit" when set to 1 should not trigger a repacking
when there is only one pack, but the code counted poorly and did
so.
* ew/gc-auto-pack-limit-fix:
gc: fix off-by-one error with gc.autoPackLimit
More markings of messages for i18n, with updates to various tests
to pass GETTEXT_POISON tests.
One patch from the original submission dropped due to conflicts
with jk/upload-pack-hook, which is still in flux.
* va/i18n-even-more: (38 commits)
t5541: become resilient to GETTEXT_POISON
i18n: branch: mark comment when editing branch description for translation
i18n: unmark die messages for translation
i18n: submodule: escape shell variables inside eval_gettext
i18n: submodule: join strings marked for translation
i18n: init-db: join message pieces
i18n: remote: allow translations to reorder message
i18n: remote: mark URL fallback text for translation
i18n: standardise messages
i18n: sequencer: add period to error message
i18n: merge: change command option help to lowercase
i18n: merge: mark messages for translation
i18n: notes: mark options for translation
i18n: notes: mark strings for translation
i18n: transport-helper.c: change N_() call to _()
i18n: bisect: mark strings for translation
t5523: use test_i18ngrep for negation
t4153: fix negated test_i18ngrep call
t9003: become resilient to GETTEXT_POISON
tests: unpack-trees: update to use test_i18n* functions
...
For blobs, we want to make sure the on-disk data is not corrupted
(i.e. can be inflated and produce the expected SHA-1). Blob content is
opaque, there's nothing else inside to check for.
For really large blobs, we may want to avoid unpacking the entire blob
in memory, just to check whether it produces the same SHA-1. On 32-bit
systems, we may not have enough virtual address space for such memory
allocation. And even on 64-bit where it's not a problem, allocating a
lot more memory could result in kicking other parts of systems to swap
file, generating lots of I/O and slowing everything down.
For this particular operation, not unpacking the blob and letting
check_sha1_signature, which supports streaming interface, do the job
is sufficient. check_sha1_signature() is not shown in the diff,
unfortunately. But if will be called when "data_valid && !data" is
false.
We will call the callback function "fn" with NULL as "data". The only
callback of this function is fsck_obj_buffer(), which does not touch
"data" at all if it's a blob.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A typical diff will not show what's going on and you need to see full
functions. The core code is like this, at the end of of write_one()
e->idx.offset = *offset;
size = write_object(f, e, *offset);
if (!size) {
e->idx.offset = recursing;
return WRITE_ONE_BREAK;
}
written_list[nr_written++] = &e->idx;
/* make sure off_t is sufficiently large not to wrap */
if (signed_add_overflows(*offset, size))
die("pack too large for current definition of off_t");
*offset += size;
Here we can see that the in-pack object size is returned by
write_object (or indirectly by write_reuse_object). And it's used to
calculate object offsets, which end up in the pack index file,
generated at the end.
If "size" overflows (on 32-bit sytems, unsigned long is 32-bit while
off_t can be 64-bit), we got wrong offsets and produce incorrect .idx
file, which may make it look like the .pack file is corrupted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
unpack_entry_data() receives an off_t value from unpack_raw_entry(),
which could be larger than unsigned long on 32-bit systems with large
file support. Correct the type so truncation does not happen. This
only affects bad object reporting though.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the right type for offsets in this case, off_t, which makes a
difference on 32-bit systems with large file support, and change
formatting code accordingly.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On 32-bit systems with large file support, one entry could be larger
than 4GB and overflow "len". Correct it so we can unpack a full entry.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This field, filled by sha1_object_info() contains the on-disk size of
an object, which could go over 4GB limit of unsigned long on 32-bit
systems. Use off_t for it instead and update all callers.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't throw the memory allocated for remove_dir_recursively() away after
a single call, use it for the other entries as well instead.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On 32 bit systems with large file support, unsigned long is 32-bit
while the two offsets in the subtraction expression (pack-objects has
the exact same expression as in sha1_file.c but not shown in diff) are
in 64-bit. If an in-pack object is larger than 2^32 len/datalen is
truncated and we get a misleading "error: bad packed object CRC for
..." as a result.
Use off_t for len and datalen. check_pack_crc() already accepts this
argument as off_t and can deal with 4+ GB.
Noticed-by: Christoph Michelbach <michelbach94@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an unintended regression in v2.9 that breaks "clone --depth"
that recurses down to submodules by forcing the submodules to also
be cloned shallowly, which many server instances that host upstream
of the submodules are not prepared for.
* sb/clone-shallow-passthru:
clone: do not let --depth imply --shallow-submodules
The ownership rule for the piece of memory that hold references to
be fetched in "git fetch" was screwy, which has been cleaned up.
* km/fetch-do-not-free-remote-name:
builtin/fetch.c: don't free remote->name after fetch
"git log" learns log.showSignature configuration variable, and a
command line option "--no-show-signature" to countermand it.
* mj/log-show-signature-conf:
log: add log.showSignature configuration variable
log: add "--no-show-signature" command line option
t4202: refactor test
A helper function that takes the contents of a commit object and
finds its subject line did not ignore leading blank lines, as is
commonly done by other codepaths. Make it ignore leading blank
lines to match.
* js/find-commit-subject-ignore-leading-blanks:
reset --hard: skip blank lines when reporting the commit subject
sequencer: use skip_blank_lines() to find the commit subject
commit -C: skip blank lines at the beginning of the message
commit.c: make find_commit_subject() more robust
pretty: make the skip_blank_lines() function public
"git submodule update" that drives many "git clone" could
eventually hit flaky servers/network conditions on one of the
submodules; the command learned to retry the attempt.
* sb/submodule-clone-retry:
submodule update: continue when a clone fails
submodule--helper: initial clone learns retry logic
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 47f0b6d5 (Fall back to three-way merge when applying a patch.,
2005-10-06), i.e. for almost 11 years already, we used a male form
to describe "the other tree".
While it was unintended, this gave the erroneous impression as if
the Git developers thought of users as male, and were unaware of the
important role in software development played by female actors such
as Ada Lovelace, Grace Hopper and Margaret Hamilton. In fact, the
first professional software developers were all female.
Let's change those unfortunate references to the gender neutral
"their tree". Doing so also makes the fallback_merge_recursive(),
which is an oddball, more in line with the other parts of the system
where we contrast what we have vs what we obtain from others by
saying "ours" vs "theirs". This inconsistency was also unintended.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We know that it should not contain any percent-signs, but
it's a good habit not to feed non-literals to printf
formatters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we already have a strbuf, then using write_file_buf is a
little nicer to read (no wondering whether "%s" will eat
your NULs), and it's more efficient (no extra formatting
step).
We don't care about the newline magic of write_file(), as we
have our own multi-line content.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several places where we open a file, write some
content from a strbuf, and close it. These can be simplified
with write_file_buf(). As a bonus, many of these did not
catch write problems at close() time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use write_file_gently() to do this job currently.
However, if we see an error, we simply complain via
error_errno() and then end up exiting with an error code.
By switching to the non-gentle form, the function will die
for us, with a better error. It is more specific about which
syscall caused the error, and that mentions the
actual filename we're trying to write.
Our exit code for the error case does switch from "1" to
"128", but that's OK; it wasn't a meaningful documented code
(and in fact it was odd that it was a different exit code
than most other error conditions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_file() either returns 0 or dies, so there is no point in checking
its return value. The callers of the wrappers write_state_text(),
write_state_count() and write_state_bool() consequently already ignore
their return values. Stop pretending we care and make them void.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 9830534 (config --global --edit: create a template
file if needed, 2014-07-25), an edit of the global config
file will try to open() it with O_EXCL, and wants to handle
three cases:
1. We succeeded; the user has no config file, and we
should fill in the default template.
2. We got EEXIST; they have a file already, proceed as usual.
3. We got another error; we should complain.
However, the check for case 1 does "if (fd)", which will
generally _always_ be true (except for the oddball case that
somehow our stdin got closed and opening really did give us
a new descriptor 0).
So in the EEXIST case, we tried to write the default config
anyway! Fortunately, this turns out to be a noop, since we
just end up writing to and closing "-1", which does nothing.
But in case 3, we would fail to notice any other errors, and
just silently continue (given that we don't actually notice
write errors for the template either, it's probably not that
big a deal; we're about to spawn the editor, so it would
notice any problems. But the code is clearly _trying_ to hit
cover this case and failing).
We can fix it easily by using "fd >= 0" for case 1.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an unintended regression in v2.9 that breaks "clone --depth"
that recurses down to submodules by forcing the submodules to also
be cloned shallowly, which many server instances that host upstream
of the submodules are not prepared for.
* sb/clone-shallow-passthru:
clone: do not let --depth imply --shallow-submodules
