Commit graph

39 commits

Author SHA1 Message Date
SZEDER Gábor
1c5e94f459 tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
Using 'test_must_be_empty' is shorter and more idiomatic than

  >empty &&
  test_cmp empty out

as it saves the creation of an empty file.  Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).

These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.

Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:

  - Sometimes the expected output is not hard-coded in the test, but
    'test_cmp' is used to ensure that two similar git commands produce
    the same output, and that output happens to be empty, e.g. the
    test 'submodule update --merge  - ignores --merge  for new
    submodules' in 't7406-submodule-update.sh'.

  - Repetitive common tasks, including preparing the expected results
    and running 'test_cmp', are often extracted into a helper
    function, and some of this helper's callsites expect no output.

  - For the same reason as above, the whole 'test_expect_success'
    block is within a helper function, e.g. in 't3070-wildmatch.sh'.

  - Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
    (-p)' in 't9400-git-cvsserver-server.sh'.

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-21 11:48:36 -07:00
Ævar Arnfjörð Bjarmason
d3c6751b18 tests: make use of the test_must_be_empty function
Change various tests that use an idiom of the form:

    >expect &&
    test_cmp expect actual

To instead use:

    test_must_be_empty actual

The test_must_be_empty() wrapper was introduced in ca8d148daf ("test:
test_must_be_empty helper", 2013-06-09). Many of these tests have been
added after that time. This was mostly found with, and manually pruned
from:

    git grep '^\s+>.*expect.* &&$' t

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30 11:18:41 -07:00
Junio C Hamano
5cee349370 Revert "Merge branch 'nd/exclusion-regression-fix'"
This reverts commit 5e57f9c3df, reversing
changes made to e79112d210.

We will be postponing nd/exclusion-regression-fix topic to later
cycle.
2016-03-18 11:06:15 -07:00
Nguyễn Thái Ngọc Duy
d589a67ece dir.c: don't exclude whole dir prematurely
If there is a pattern "!foo/bar", this patch makes it not exclude
"foo" right away. This gives us a chance to examine "foo" and
re-include "foo/bar".

Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Micha Wiedenmann <mw-u2@gmx.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-15 15:32:33 -08:00
Junio C Hamano
76b620d816 Merge branch 'nd/exclusion-regression-fix'
The ignore mechanism saw a few regressions around untracked file
listing and sparse checkout selection areas in 2.7.0; the change
that is responsible for the regression has been reverted.

* nd/exclusion-regression-fix:
  Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"
2016-01-20 11:43:33 -08:00
Nguyễn Thái Ngọc Duy
8c722360d1 Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"
This reverts commit 57534ee77d. The
feature added in that commit requires that patterns behave the same way
from anywhere. But some patterns can behave differently depending on
current "working" directory. The conditions to catch and avoid these
patterns are too loose. The untracked listing[1] and sparse-checkout
selection[2] can become incorrect as a result.

  [1] http://article.gmane.org/gmane.comp.version-control.git/283520
  [2] http://article.gmane.org/gmane.comp.version-control.git/283532

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-08 11:24:14 -08:00
Junio C Hamano
506d8f1b39 Merge branch 'nd/ignore-then-not-ignore'
Allow a later "!/abc/def" to override an earlier "/abc" that
appears in the same .gitignore file to make it easier to express
"everything in /abc directory is ignored, except for ...".

* nd/ignore-then-not-ignore:
  dir.c: don't exclude whole dir prematurely if neg pattern may match
  dir.c: make last_exclude_matching_from_list() run til the end
2015-10-07 13:38:17 -07:00
Nguyễn Thái Ngọc Duy
57534ee77d dir.c: don't exclude whole dir prematurely if neg pattern may match
If there is a pattern "!foo/bar", this patch makes it not exclude "foo"
right away. This gives us a chance to examine "foo" and re-include
"foo/bar".

In order for it to detect that the directory under examination should
not be excluded right away, in other words it is a parent directory of a
negative pattern, the "directory path" of the negative pattern must be
literal. Patterns like "!f?o/bar" can't stop "foo" from being excluded.

Basename matching (i.e. "no slashes in the pattern") or must-be-dir
matching (i.e. "trailing slash in the pattern") does not work well with
this. For example, if we descend in "foo" and are examining "foo/abc",
current code for "foo/" pattern will check if path "foo/abc", not "foo",
is a directory. The same problem with basename matching. These may need
big code reorg to make it work.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-21 11:06:47 -07:00
Jeff King
60687de5ba t: fix moderate &&-chain breakage
These are tests which are missing a link in their &&-chain,
but in a way that probably does not effect the outcome of
the test. Most of these are of the form:

  some_cmd >actual
  test_cmp expect actual

The main point of the test is to verify the output, and a
failure in some_cmd would probably be noticed by bogus
output. But it is good for the tests to also confirm that
"some_cmd" does not die unexpectedly after producing its
output.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20 10:20:13 -07:00
Matthieu Moy
2556b9962e status: disable display of '#' comment prefix by default
Historically, "git status" needed to prefix each output line with '#' so
that the output could be added as comment to the commit message. This
prefix comment has no real purpose when "git status" is ran from the
command-line, and this may distract users from the real content.

Disable this prefix comment by default, and make it re-activable for
users needing backward compatibility with status.displayCommentPrefix.

Obviously, "git commit" ignores status.displayCommentPrefix and keeps the
comment unconditionnaly when writing to COMMIT_EDITMSG (but not when
writing to stdout for an error message or with --dry-run).

Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-06 13:33:18 -07:00
Junio C Hamano
3684101a65 Merge branch 'kb/status-ignored-optim-2'
Fix 1.8.3 regressions in the .gitignore path exclusion logic.

* kb/status-ignored-optim-2:
  dir.c: fix ignore processing within not-ignored directories
2013-06-03 12:58:56 -07:00
Karsten Blees
c3c327deea dir.c: fix ignore processing within not-ignored directories
As of 95c6f271 "dir.c: unify is_excluded and is_path_excluded APIs", the
is_excluded API no longer recurses into directories that match an ignore
pattern, and returns the directory's ignored state for all contained paths.

This is OK for normal ignore patterns, i.e. ignoring a directory affects
the entire contents recursively.

Unfortunately, this also "works" for negated ignore patterns ('!dir'), i.e.
the entire contents is "not-ignored" recursively, regardless of ignore
patterns that match the contents directly.

In prep_exclude, skip recursing into a directory only if it is really
ignored (i.e. the ignore pattern is not negated).

Signed-off-by: Karsten Blees <blees@dcon.de>
Tested-by: Øystein Walle <oystwa@gmail.com>
Reviewed-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-02 14:54:38 -07:00
Junio C Hamano
7093d2c0dd Merge branch 'kb/status-ignored-optim-2'
Fixes a handful of issues in the code to traverse working tree to
find untracked and/or ignored files, cleans up and optimizes the
codepath in general.

* kb/status-ignored-optim-2:
  dir.c: git-status --ignored: don't scan the work tree twice
  dir.c: git-status --ignored: don't scan the work tree three times
  dir.c: git-status: avoid is_excluded checks for tracked files
  dir.c: replace is_path_excluded with now equivalent is_excluded API
  dir.c: unify is_excluded and is_path_excluded APIs
  dir.c: move prep_exclude
  dir.c: factor out parts of last_exclude_matching for later reuse
  dir.c: git-clean -d -X: don't delete tracked directories
  dir.c: make 'git-status --ignored' work within leading directories
  dir.c: git-status --ignored: don't list empty directories as ignored
  dir.c: git-ls-files --directories: don't hide empty directories
  dir.c: git-status --ignored: don't list empty ignored directories
  dir.c: git-status --ignored: don't list files in ignored directories
  dir.c: git-status --ignored: don't drop ignored directories
2013-04-23 11:21:23 -07:00
Karsten Blees
5bd8e2d894 dir.c: git-clean -d -X: don't delete tracked directories
The notion of "ignored tracked" directories introduced in 721ac4ed "dir.c:
Make git-status --ignored more consistent" has a few unwanted side effects:

 - git-clean -d -X: deletes ignored tracked directories. git-clean should
   never delete tracked content.

 - git-ls-files --ignored --other --directory: lists ignored tracked
   directories instead of "other" directories.

 - git-status --ignored: lists ignored tracked directories while contained
   files may be listed as modified. Paths listed by git-status should be
   disjoint (except in long format where a path may be listed in both the
   staged and unstaged section).

Additionally, the current behaviour violates documentation in gitignore(5)
("Specifies intentionally *untracked* files to ignore") and Documentation/
technical/api-directory-listing.txt ("DIR_SHOW_OTHER_DIRECTORIES: Include
a directory that is *not tracked*.").

In dir.c::treat_directory, remove the special handling of ignored tracked
directories, so that the DIR_SHOW_OTHER_DIRECTORIES flag only affects
"other" (i.e. untracked) directories. In dir.c::dir_add_name, check that
added paths are untracked even if DIR_SHOW_IGNORED is set.

Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15 12:34:00 -07:00
Karsten Blees
184d2a8e96 dir.c: git-ls-files --directories: don't hide empty directories
'git-ls-files --ignored --directories' hides empty directories even though
--no-empty-directory was not specified.

Treat the DIR_HIDE_EMPTY_DIRECTORIES flag independently from
DIR_SHOW_IGNORED to make all git-ls-files options work as expected.

Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15 12:33:59 -07:00
Nguyễn Thái Ngọc Duy
08d595dc1c checkout: add --ignore-skip-worktree-bits in sparse checkout mode
"git checkout -- <paths>" is usually used to restore all modified
files in <paths>. In sparse checkout mode, this command is overloaded
with another meaning: to add back all files in <paths> that are
excluded by sparse patterns.

As the former makes more sense for day-to-day use. Switch it to the
default and the latter enabled with --ignore-skip-worktree-bits.

While at there, add info/sparse-checkout to gitrepository-layout.txt

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15 08:54:45 -07:00
Nguyễn Thái Ngọc Duy
237ec6e40d Support "**" wildcard in .gitignore and .gitattributes
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-15 14:58:19 -07:00
Nguyễn Thái Ngọc Duy
a3ea4d7199 exclude: fix a bug in prefix compare optimization
When "namelen" becomes zero at this stage, we have matched the fixed
part, but whether it actually matches the pattern still depends on the
pattern in "exclude". As demonstrated in t3001, path "three/a.3"
exists and it matches the "three/a.3" part in pattern "three/a.3[abc]",
but that does not mean a true match.

Don't be too optimistic and let fnmatch() do the job.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-15 14:57:16 -07:00
Jonathan Nieder
a48fcd8369 tests: add missing &&
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.

Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail.  The examples in this patch do not require that.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-09 11:59:49 -08:00
Junio C Hamano
3af59e6f31 Merge branch 'jc/ls-files-ignored-pathspec'
* jc/ls-files-ignored-pathspec:
  ls-files: fix overeager pathspec optimization
  read_directory(): further split treat_path()
  read_directory_recursive(): refactor handling of a single path into a separate function
  t3001: test ls-files -o ignored/dir
2010-01-20 14:43:54 -08:00
Junio C Hamano
48ffef966c ls-files: fix overeager pathspec optimization
Given pathspecs that share a common prefix, ls-files optimized its call
into recursive directory reader by starting at the common prefix
directory.

If you have a directory "t" with an untracked file "t/junk" in it, but the
top-level .gitignore file told us to ignore "t/", this resulted in:

    $ git ls-files -o --exclude-standard
    $ git ls-files -o --exclude-standard t/
    t/junk
    $ git ls-files -o --exclude-standard t/junk
    t/junk
    $ cd t && git ls-files -o --exclude-standard
    junk

We could argue that you are overriding the ignore file by giving a
patchspec that matches or being in that directory, but it is somewhat
unexpected.  Worse yet, these behave differently:

    $ git ls-files -o --exclude-standard t/ .
    $ git ls-files -o --exclude-standard t/
    t/junk

This patch changes the optimization so that it notices when the common
prefix directory that it starts reading from is an ignored one.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 23:14:50 -08:00
Junio C Hamano
472e746991 t3001: test ls-files -o ignored/dir
When you have "t" directory that is marked as ignored in the top-level
.gitignore file (or $GIT_DIR/info/exclude), running

    $ git ls-files -o --exclude-standard

from the top-level correctly excludes files in "t" directory, but
any of the following:

    $ git ls-files -o --exclude-standard t/
    $ cd t && git ls-files -o --exclude-standard

would show untracked files in that directory.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 23:11:40 -08:00
Nguyễn Thái Ngọc Duy
c28b3d6e7b Read .gitignore from index if it is skip-worktree
This adds index as a prerequisite for directory listing (with
exclude).  At the moment directory listing is used by "git clean",
"git add", "git ls-files" and "git status"/"git commit" and
unpack_trees()-related commands.  These commands have been
checked/modified to populate index before doing directory listing.

add_excludes_from_file() does not enable this feature, because it
is used to read .git/info/exclude and some explicit files specified
by "git ls-files".

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-23 17:13:33 -07:00
Junio C Hamano
1456d964fa Merge branch 'fg/exclude-bq'
* fg/exclude-bq:
  Support "\" in non-wildcard exclusion entries
2009-03-05 15:41:39 -08:00
Finn Arne Gangstad
dd482eeac2 Support "\" in non-wildcard exclusion entries
"\" was treated differently in exclude rules depending on whether a
wildcard match was done. For wildcard rules, "\" was de-escaped in
fnmatch, but this was not done for other rules since they used strcmp
instead.  A file named "#foo" would not be excluded by "\#foo", but would
be excluded by "\#foo*".

We now treat all rules with "\" as wildcard rules.

Another solution could be to de-escape all non-wildcard rules as we
read them, but we would have to do the de-escaping exactly as fnmatch
does it to avoid inconsistencies.

Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-12 11:36:43 -08:00
Michael J Gruber
32738edfca test overlapping ignore patterns
Add a test which checks that negated patterns such as "!foo.html" can
override previous patterns such as "*.html". This is documented
behaviour but had not been tested so far.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-18 09:55:53 -08:00
Nanako Shiraishi
0cb0e143ff tests: use "git xyzzy" form (t0000 - t3599)
Converts tests between t0050-t3903.

Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-03 12:41:46 -07:00
Junio C Hamano
3af828634f tests: do not use implicit "git diff --no-index"
As a general principle, we should not use "git diff" to validate the
results of what git command that is being tested has done.  We would not
know if we are testing the command in question, or locating a bug in the
cute hack of "git diff --no-index".

Rather use test_cmp for that purpose.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-24 00:01:56 -07:00
Jeff King
82ebb0b6ec add test_cmp function for test scripts
Many scripts compare actual and expected output using
"diff -u". This is nicer than "cmp" because the output shows
how the two differ. However, not all versions of diff
understand -u, leading to unnecessary test failure.

This adds a test_cmp function to the test scripts and
switches all "diff -u" invocations to use it. The function
uses the contents of "$GIT_TEST_CMP" to compare its
arguments; the default is "diff -u".

On systems with a less-capable diff, you can do:

  GIT_TEST_CMP=cmp make test

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-13 00:57:52 -07:00
Junio C Hamano
d6b8fc303b gitignore(5): Allow "foo/" in ignore list to match directory "foo"
A pattern "foo/" in the exclude list did not match directory
"foo", but a pattern "foo" did.  This attempts to extend the
exclude mechanism so that it would while not matching a regular
file or a symbolic link "foo".  In order to differentiate a
directory and non directory, this passes down the type of path
being checked to excluded() function.

A downside is that the recursive directory walk may need to run
lstat(2) more often on systems whose "struct dirent" do not give
the type of the entry; earlier it did not have to do so for an
excluded path, but we now need to figure out if a path is a
directory before deciding to exclude it.  This is especially bad
because an idea similar to the earlier CE_UPTODATE optimization
to reduce number of lstat(2) calls would by definition not apply
to the codepaths involved, as (1) directories will not be
registered in the index, and (2) excluded paths will not be in
the index anyway.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-05 00:46:49 -08:00
Johannes Schindelin
637efc3456 Replace "runstatus" with "status" in the tests
We no longer have "runstatus", but running "status" is no longer that
expensive anyway; it is a builtin.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-22 17:05:04 -08:00
Junio C Hamano
5be60078c9 Rewrite "git-frotz" to "git frotz"
This uses the remove-dashes target to replace "git-frotz" to "git frotz".

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02 22:52:14 -07:00
Johannes Schindelin
0ba956d331 git-status: respect core.excludesFile
git-add reads this variable, and honours the contents of that file if that
exists. Match this behaviour in git-status, too.

Noticed by Evan Carroll on IRC.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-21 18:36:02 -07:00
Johannes Schindelin
5bd74506cd Get rid of the dependency to GNU diff in the tests
Now that "git diff" handles stdin and relative paths outside the
working tree correctly, we can convert all instances of "diff -u"
to "git diff".

This commit is really the result of

$ perl -pi.bak -e 's/diff -u/git diff/' $(git grep -l "diff -u" t/)

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>

(cherry picked from commit c699a40d68215c7e44a5b26117a35c8a56fbd387)
2007-03-04 00:24:15 -08:00
Alex Riesen
0dbc4e89bb avoid echo -e, there are systems where it does not work
FreeBSD 4.11 being one example: the built-in echo doesn't have -e,
and the installed /bin/echo does not do "-e" as well.
"printf" works, laking just "\e" and "\xAB'.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-12 11:36:19 -08:00
Alex Riesen
d317e4384a remove CR/LF from .gitignore
For everyone cursed by dos/windows line endings (aka CRLF):

The code reading the .gitignore files (excludes and excludes per
directory) leaves \r in the patterns, which causes fnmatch to fail for
no obvious reason. Just remove a "\r" preceding a "\n"
unconditionally.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-02 16:50:58 -08:00
Pavel Roskin
da7bc9b081 [PATCH] Missing test_done
All test scripts should end with test_done, which reports the test
results.  In the future, it could be used for other purposes, e.g. to
distinguish graceful end from "exit" in a test.  This patch fixes
scripts that don't call test_done.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-11 18:26:15 -07:00
Junio C Hamano
1df092d211 Documentation and tests: ls-files exclude pattern.
Update the tests and documentation to match the new "last one
determines its fate" semantics.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-29 17:21:47 -07:00
Junio C Hamano
f87f949748 git-ls-files: --exclude mechanism updates.
Add --exclude-per-directory=<name> option that specifies a file
to contain exclude patterns local to that directory and its
subdirectories.  Update the exclusion logic to be able to say
"include files that match this more specific pattern, even
though later exclude patterns may match them".  Also enhances
that a pattern can contain '/' in which case fnmatch is called
with FNM_PATHNAME flag to match the entire path. 

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-25 17:03:52 -07:00