Much like with the dumb HTTP transport, there isn't a way to explicitly
specify the hash algorithm when dealing with a bundle, so detect the
algorithm based on the length of the object IDs in the prerequisites and
ref advertisements.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git index-pack by default reads the repository to determine the object
format. However, when outside of a repository, it's necessary to specify
the hash algorithm in use so that the pack can be properly indexed. Add
an --object-format argument when invoking git index-pack outside of a
repository.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we speak protocol v2 in this test, we must pass the object-format
header if the algorithm is not SHA-1. Otherwise, git upload-pack fails
because the hash algorithm doesn't match and not because we've failed to
speak the protocol correctly. Pass the header so that our assertions
test what we're really interested in.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're using an algorithm other than SHA-1, we need to specify the
algorithm in use so we don't get a failure with an "unknown format"
message. Add a wrapper function that specifies this header if required.
Skip specifying this header for SHA-1 to test that it works both with an
without this header.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to make this test work with SHA-256, offer an object-format
capability so that both sides use the same algorithm.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-sha1-array uses the_hash_algo under the hood. Since t0064 wants to
use the value that is correct for the hash algorithm that we're testing,
make sure the test helper initializes the repository to set
the_hash_algo correctly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally, the remote-curl transport helper is aware of the hash
algorithm we're using because we're in a repo with the appropriate hash
algorithm set. However, when using git ls-remote outside of a
repository, we won't have initialized the hash algorithm properly, so
use hash_to_hex_algop to print the ref corresponding to the algorithm
we've detected.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When outside a repository, git index-pack is unable to guess the hash
algorithm in use for a pack, since packs don't contain any information
on the algorithm in use. Pass an option to index-pack to help it out in
this test.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git index-pack is usually run in a repository, but need not be. Since
packs don't contains information on the algorithm in use, instead
relying on context, add an option to index-pack to tell it which one
we're using in case someone runs it outside of a repository. Since
using --stdin necessarily implies a repository, don't allow specifying
an object format if it's provided to prevent users from passing an
option that won't work. Add documentation for this option.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading the info/refs file for a repository, we have no explicit
way to detect which hash algorithm is in use because the file doesn't
provide one. Detect the hash algorithm in use by the size of the first
object ID.
If we have an empty repository, we don't know what the hash algorithm is
on the remote side, so default to whatever the local side has
configured. Without doing this, we cannot clone an empty repository
since we don't know its hash algorithm. Test this case appropriately,
since we currently have no tests for cloning an empty repository with
the dumb HTTP protocol.
We anonymize the URL like elsewhere in the function in case the user has
decided to include a secret in the URL.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-remote may or may not operate within a repository, and as such will
not have been initialized with the repository's hash algorithm. Even if
it were, the remote side could be using a different algorithm and we
would still want to display those refs properly. Find the hash
algorithm used by the remote side by querying the transport object and
set our hash algorithm accordingly.
Without this change, if the remote side is using SHA-256, we truncate
the refs to 40 hex characters, since that's the length of the default
hash algorithm (SHA-1).
Note that technically this is not a correct setting of the repository
hash algorithm since, if we are in a repository, it might be one of a
different hash algorithm from the remote side. However, our current
code paths don't handle multiple algorithms and won't for some time, so
this is the best we can do. We rely on the fact that ls-remote never
modifies the current repository, which is a reasonable assumption to
make.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test has hard-coded pkt-lines with object IDs. The pkt-line
lengths necessarily differ between hash algorithms, so generate these
lines with the packetize helper so they're always the right size. In
addition, we will require an object-format capability for SHA-256, so
pass that capability on to the upload-pack process.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to communicate the protocol supported by the server side, add
support for advertising the object-format capability. We check that the
client side sends us an identical algorithm if it sends us its own
object-format capability, and assume it speaks SHA-1 if not.
In the test, when we're using an algorithm other than SHA-1, we need to
specify the algorithm in use so we don't get a failure with an "unknown
format" message. Add a test that we handle a mismatched algorithm.
Remove the test_oid_init call since it's no longer necessary.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using protocol v2, we need to know what hash algorithm is used by
the remote end. See if the server has sent us an object-format
capability, and if so, use it to determine the hash algorithm in use and
set that value in the packet reader. Parse the refs using this
algorithm.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're parsing refs, we need to know not only what the line we're
parsing is, but also the hash algorithm we should use to parse it, which
is stored in the reader object. Pass the packet reader object through
to the protocol v2 ref parsing function.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the object-format extension for protocol v2.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using SHA-256, we need to take advantage of the extensions section
in the config file, so we need to use repository format version 1.
Update the test to look for the correct value.
Note that test_oid produces a value without a trailing newline, so use
echo to ensure we print a trailing newline to compare it correctly
against the actual results.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
show-index is capable of reading any possible index file whether or not
the index is inside a repository. However, because our index files lack
metadata about the hash algorithm in use, it's not possible to
autodetect the algorithm that a particular index file is using.
In order to allow us to read index files of any algorithm, let's set up
the .git directory gently so that we default to the algorithm for the
current repository, and add an --object-format option to allow users to
override this setting and continue to run show-index outside of a
repository altogether. Let's also document this new option so that
people can find it and use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our style these days is to place the description and the opening quote
of the body on the same line as test_expect_success (if it fits), to
place the trailing quote on a line by itself after the body, and to use
tabs. Since we're going to be making several significant changes to
this test, modernize the style to aid in readability of the subsequent
patches.
This patch should have no functional change.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both v2 pack index files and the v3 format specified as part of the
NewHash work have similar data starting at the CRC table. Much of the
existing code wants to read either this table or the offset entries
following it, and in doing so computes the offset each time.
In order to share as much code between v2 and v3, compute the offset of
the CRC table and store it when the pack is opened. Use this value to
compute offsets to not only the CRC table, but to the offset entries
beyond it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the test assertions in this test checks that git branch -m works
even without a .git/config file. However, if the repository requires
configuration extensions, such as because it uses a non-SHA-1 algorithm,
this assertion will fail. Mark the assertion as requiring SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're checking the repository's format, set the hash algorithm at
the same time. This ensures that we perform a suitable initialization
early enough to avoid confusing any parts of the code. If we defer
until later, we can end up with portions of the code which are confused
about the hash algorithm, resulting in segfaults when working with
SHA-256 repositories.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parse the server's object-format capability and respond accordingly,
dying if there is a mismatch.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ensure that we pass the object-format capability in the synthesized test
data so that this test works with algorithms other than SHA-1.
In addition, add an additional test using the old data for when we're
using SHA-1 so that we can be sure that we preserve backwards
compatibility with servers not offering the object-format capability.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a clone, we don't know what hash algorithm the other end
will support. Currently, we don't support fetching data belonging to a
different algorithm, so we must know what algorithm the remote side is
using in order to properly initialize the repository. We can know that
only after fetching the refs, so if the remote side has any references,
use that information to reinitialize the repository with the correct
hash algorithm information.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the object-format extensions that let us determine the hash
algorithm in use when pushing, pulling, and fetching.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the object-format extensions that let us determine the hash
algorithm in use when pushing or pulling data.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the remote helper docs to document the object-format extensions
we will implement in remote-curl and the transport helper code shortly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detect when the server doesn't support our hash algorithm and abort.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we're fetching refs, detect the hash algorithm and parse the refs
using that algorithm.
As mentioned in the documentation, if multiple versions of the
object-format capability are provided, we use the first. No known
implementation supports multiple algorithms now, but they may in the
future.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detect when the server doesn't support our hash algorithm and abort.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're going to be using this function in other files, so no longer mark
this function static.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detect when the server doesn't support our hash algorithm and abort.
If the server does support our hash, advertise it as part of our
capabilities.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function, server_supports_hash, to see if the remote server
supports a particular hash algorithm when speaking protocol v1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When connecting to a remote system, we need to know what hash algorithm
it will be using to talk to us. Add a hash_algo member to struct
transport and add a function to read this data from the transport
object.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a member for the hash algorithm currently in use to the packet
reader so it can parse references correctly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far in protocol v2, all of our server capabilities that have values
have not had values that we've been interested in parsing. For example,
we receive but ignore the agent value.
However, in a future commit, we're going to want to parse out the value
of a server capability. To make this easy, add a function,
server_feature_v2, that can fetch the value provided as part of the
server capability.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a capability response, we can have multiple symref entries. In the
future, we will also allow for multiple hash algorithms to be specified.
To avoid duplication, expand the parse_feature_value function to take an
optional offset where the parsing should begin next time. Add a wrapper
function that allows us to query the next server feature value, and use
it in the existing symref parsing code.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Advertise the current hash algorithm in use by using the object-format
capability as part of the ref advertisement.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing capabilities for the pack protocol, there are times we'll
want to compare the value of a capability to a NUL-terminated string.
Since the data we're reading will be space-terminated, not
NUL-terminated, we need a function that compares the two strings, but
also checks that they're the same length. Otherwise, if we used strncmp
to compare these strings, we might accidentally accept a parameter that
was a prefix of the expected value.
Add a function, xstrncmpz, that takes a NUL-terminated string and a
non-NUL-terminated string, plus a length, and compares them, ensuring
that they are the same length.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a future patch, we'll want to access multiple members from struct
packet_reader when parsing references. Therefore, have the ref parsing
code take pointers to struct reader instead of having to pass multiple
arguments to each function.
Rename the len variable to "linelen" to make it clearer what the
variable does in light of the variable change.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document a capability that indicates which hash algorithms are in use by
both sides of a remote connection. Use the term "object-format", since
this is the term used for the repository extension as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pattern here looking for failures is specific to SHA-1. Let's
create a variable that matches the regex or glob pattern for a path
within the objects directory.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent change to show files and line numbers of a breakage during
test (only available when running the tests with bash) were hurting
other shells with syntax errors, which has been corrected.
* cb/test-bash-lineno-fix:
t/test_lib: avoid naked bash arrays in file_lineno
The basic test did not honor $TEST_SHELL_PATH setting, which has
been corrected.
* cb/t0000-use-the-configured-shell:
t/t0000-basic: make sure subtests also use TEST_SHELL_PATH
The <stdlib.h> header on NetBSD brings in its own definition of
hmac() function (eek), which conflicts with our own and unrelated
function with the same name. Our function has been renamed to work
around the issue.
* cb/avoid-colliding-with-netbsd-hmac:
builtin/receive-pack: avoid generic function name hmac()
"git restore --staged --worktree" now defaults to take the contents
out of "HEAD", instead of erring out.
* es/restore-staged-from-head-by-default:
restore: default to HEAD when combining --staged and --worktree
