The warning message to suggest "Consider running git-status" from
"git-diff" that we experimented with during the 1.5.3 cycle turns
out to be a bad idea. It robbed cache-dirty information from people
who valued it, while still asking users to run "update-index --refresh".
It was hoped that the new behaviour would at least have some educational
value, but not showing the cache-dirty paths like before meant that the
user would not even know easily which paths were cache-dirty, and it
made the need to refresh the index look like even more unnecessary chore.
This commit reinstates the traditional behaviour, but with a twist.
By default, the empty "diff --git" output is totally squelched out
from "git diff" output. At the end of the command, it automatically
runs "update-index --refresh" as needed, without even bothering the
user. In other words, people who do not care about the cache-dirtyness
do not even have to see the warning.
The traditional behaviour to see the stat-dirty output and to bypassing
the overhead of content comparison can be specified by setting the
configuration variable diff.autorefreshindex to false.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When not referring to the cvs command, CVS makes more sense.
Signed-off-by: Brian Hetro <whee@smaertness.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted by Mike Hommey, the documentation for the config setting tar.umask
is not up-to-date. Commit f08b3b0e2e changed
the default from 0 to 2; this patch finally documents it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easier to find out how to enable the reflog
for a bare repository by searching the documentation for
"reflog".
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current implementation of core.gitproxy only operates on
git:// URLs, so the ssh:// examples and custom protocol examples
have been removed or edited.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add it to the list in config.txt and explicitly say that the
--template option to git-commit overrides the configuration variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables let you specify an editor that will be launched in
preference to the EDITOR and VISUAL environment variables. The order
of preference is GIT_EDITOR, core.editor, EDITOR, VISUAL.
[jc: added a test and config variable documentation]
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "Configuration" section to describe merge.summary
configuration variable (which is mentioned in git-fmt-merge-msg(1)
man page, but it is a plumbing command), and merge.verbosity
configuration variable (so there is a place to make reference
from "Environment Variables" section of git(7) man page) to the
git-merge(1) man page. Also describe GIT_MERGE_VERBOSITY
environment.
The configuration variable merge.verbosity and environment variable
GIT_MERGE_VERBOSITY were introduced in commit 8c3275ab, which also
documented configuration variable but not environment variable.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch cleans up some complicated code, and replaces it with a
cleaner version, using code from remote.[ch], which got extended a
little in the process. This also enables us to fix two cases:
The earlier "fix" to setup tracking only when the original ref started
with "refs/remotes" is wrong. You are absolutely allowed to use a
separate layout for your tracking branches. The correct fix, of course,
is to set up tracking information only when there is a matching
remote.<nick>.fetch line containing a colon.
Another corner case was not handled properly. If two remotes write to
the original ref, just warn the user and do not set up tracking.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio noticed that switching on autosetupmerge unilaterally started
cluttering the config for local branches. That is not the original
intention of branch.autosetupmerge, which was meant purely for
convenience when branching off of remote branches, but that semantics
got lost somewhere.
If you still want that "new" behavior, you can switch
branch.autosetupmerge to the value "all". Otherwise, it is interpreted
as a boolean, which triggers setting up defaults _only_ when branching
off of a remote branch, i.e. the originally intended behavior.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, "git rerere" was enabled by creating the directory
.git/rr-cache. That is definitely not in line with most other
features, which are enabled by a config variable.
So, check the config variable "rerere.enabled". If it is set
to "false" explicitely, do not activate rerere, even if
.git/rr-cache exists. This should help when you want to disable
rerere temporarily.
If "rerere.enabled" is not set at all, fall back to detection
of the directory .git/rr-cache.
[jc: with minimum tweaks]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a configuration variable that performs the same function as,
but is overridden by, GIT_PAGER.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Acked-by: Johannes E. Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ei/worktree+filter:
filter-branch: always export GIT_DIR if it is set
setup_git_directory: fix segfault if repository is found in cwd
test GIT_WORK_TREE
extend rev-parse test for --is-inside-work-tree
Use new semantics of is_bare/inside_git_dir/inside_work_tree
introduce GIT_WORK_TREE to specify the work tree
test git rev-parse
rev-parse: introduce --is-bare-repository
rev-parse: document --is-inside-git-dir
We always quote "unusual" byte values in a pathname using
C-string style, to make it safer for parsing scripts that do not
handle NUL separated records well (or just too lazy to bother).
The absolute minimum bytes that need to be quoted for this
purpose are TAB, LF (and other control characters), double quote
and backslash.
However, we have also always quoted the bytes in high 8-bit
range; this was partly because we were lazy and partly because
we were being cautious.
This introduces an internal "quote_path_fully" variable, and
core.quotepath configuration variable to control it. When set
to false, it does not quote bytes in high 8-bit range anymore
but passes them intact.
The variable defaults to "true" to retain the traditional
behaviour for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_gdg is used as abbreviation for setup_git_directory_gently.
The work tree can be specified using the environment variable
GIT_WORK_TREE and the config option core.worktree (the environment
variable has precendence over the config option). Additionally
there is a command line option --work-tree which sets the
environment variable.
setup_gdg does the following now:
GIT_DIR unspecified
repository in .git directory
parent directory of the .git directory is used as work tree,
GIT_WORK_TREE is ignored
GIT_DIR unspecified
repository in cwd
GIT_DIR is set to cwd
see the cases with GIT_DIR specified what happens next and
also see the note below
GIT_DIR specified
GIT_WORK_TREE/core.worktree unspecified
cwd is used as work tree
GIT_DIR specified
GIT_WORK_TREE/core.worktree specified
the specified work tree is used
Note on the case where GIT_DIR is unspecified and repository is in cwd:
GIT_WORK_TREE is used but is_inside_git_dir is always true.
I did it this way because setup_gdg might be called multiple
times (e.g. when doing alias expansion) and in successive calls
setup_gdg should do the same thing every time.
Meaning of is_bare/is_inside_work_tree/is_inside_git_dir:
(1) is_bare_repository
A repository is bare if core.bare is true or core.bare is
unspecified and the name suggests it is bare (directory not
named .git). The bare option disables a few protective
checks which are useful with a working tree. Currently
this changes if a repository is bare:
updates of HEAD are allowed
git gc packs the refs
the reflog is disabled by default
(2) is_inside_work_tree
True if the cwd is inside the associated working tree (if there
is one), false otherwise.
(3) is_inside_git_dir
True if the cwd is inside the git directory, false otherwise.
Before this patch is_inside_git_dir was always true for bare
repositories.
When setup_gdg finds a repository git_config(git_default_config) is
always called. This ensure that is_bare_repository makes use of
core.bare and does not guess even though core.bare is specified.
inside_work_tree and inside_git_dir are set if setup_gdg finds a
repository. The is_inside_work_tree and is_inside_git_dir functions
will die if they are called before a successful call to setup_gdg.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* np/pack:
fix repack with --max-pack-size
builtin-pack-object: cache small deltas
git-pack-objects: cache small deltas between big objects
builtin-pack-objects: don't fail, if delta is not possible
* maint:
Use =20 when rfc2047 encoding spaces.
Create a new manpage for the gitignore format, and reference it elsewhere
Documentation: robustify asciidoc GIT_VERSION replacement
Only git-ls-files(1) describes the gitignore format in detail, and it does so
with reference to git-ls-files options. Most users don't use the plumbing
command git-ls-files directly, and shouldn't have to look in its manpage for
information on the gitignore format.
Create a new manpage gitignore(5) (Documentation/gitignore.txt), and factor
out the gitignore documentation into that file, changing it to refer to
.gitignore and $GIT_DIR/info/exclude as used by porcelain commands. Reference
gitignore(5) from other relevant manpages and documentation. Remove
now-redundant information on exclude patterns from git-ls-files(1), leaving
only information on how git-ls-files options specify exclude patterns and what
precedence they have.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Creating deltas between big blobs is a CPU and memory intensive task.
In the writing phase, all (not reused) deltas are redone.
This patch adds support for caching deltas from the deltifing phase, so
that that the writing phase is faster.
The caching is limited to small deltas to avoid increasing memory usage very much.
The implemented limit is (memory needed to create the delta)/1024.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch documents the branch.autosetupmerge config option, added
by commit 0746d19a.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-add reads this variable, and honours the contents of that file if that
exists. Match this behaviour in git-status, too.
Noticed by Evan Carroll on IRC.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* np/pack:
deprecate the new loose object header format
make "repack -f" imply "pack-objects --no-reuse-object"
allow for undeltified objects not to be reused
This option causes 'git gc' to more aggressively optimize the
repository at the cost of taking much more wall clock and CPU time.
Today this option causes git-pack-objects to use --no-use-delta
option, and it allows the --window parameter to be set via the
gc.aggressiveWindow configuration parameter.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add config variables pack.compression and core.loosecompression ,
and switch --compression=level to pack-objects.
Loose objects will be compressed using core.loosecompression if set,
else core.compression if set, else Z_BEST_SPEED.
Packed objects will be compressed using --compression=level if seen,
else pack.compression if set, else core.compression if set,
else Z_DEFAULT_COMPRESSION. This is the "pack compression level".
Loose objects added to a pack undeltified will be recompressed
to the pack compression level if it is unequal to the current
loose compression level by the preceding rules, or if the loose
object was written while core.legacyheaders = true. Newly
deltified loose objects are always compressed to the current
pack compression level.
Previously packed objects added to a pack are recompressed
to the current pack compression level exactly when their
deltification status changes, since the previous pack data
cannot be reused.
In either case, the --no-reuse-object switch from the first
patch below will always force recompression to the current pack
compression level, instead of assuming the pack compression level
hasn't changed and pack data can be reused when possible.
This applies on top of the following patches from Nicolas Pitre:
[PATCH] allow for undeltified objects not to be reused
[PATCH] make "repack -f" imply "pack-objects --no-reuse-object"
Signed-off-by: Dana L. How <danahow@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that we encourage and actively preserve objects in a packed form
more agressively than we did at the time the new loose object format and
core.legacyheaders were introduced, that extra loose object format
doesn't appear to be worth it anymore.
Because the packing of loose objects has to go through the delta match
loop anyway, and since most of them should end up being deltified in
most cases, there is really little advantage to have this parallel loose
object format as the CPU savings it might provide is rather lost in the
noise in the end.
This patch gets rid of core.legacyheaders, preserve the legacy format as
the only writable loose object format and deprecate the other one to
keep things simpler.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
gitweb: use decode_utf8 directly
posix compatibility for t4200
Document 'opendiff' value in config.txt and git-mergetool.txt
Allow PERL_PATH="/usr/bin/env perl"
Make xstrndup common
diff.c: fix "size cache" handling.
http-fetch: Disable use of curl multi support for libcurl < 7.16.
Some other programs get the user's email address from $EMAIL, so fall back to
that if we don't have a Git-specific email address.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a new configuration option clean.requireForce. If set, git-clean will
refuse to run, unless forced with the new -f option, or not acting due to -n.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
