As discussed in [1] there's a regression in the "pu" branch now
because a new test implicitly assumed that a previous test guarded by
a prerequisite had been run. Add a "GIT_TEST_FAIL_PREREQS" special
test setup where we'll skip (nearly) all tests guarded by
prerequisites, allowing us to easily emulate those platform where we
don't run these tests.
As noted in the documentation I'm adding I'm whitelisting the SYMLINKS
prerequisite for now. A lot of tests started failing if we lied about
not supporting symlinks. It's also unlikely that we'll have a failing
test due to a hard dependency on symlinks without that being the
obvious cause, so for now it's not worth the effort to make it work.
1. https://public-inbox.org/git/nycvar.QRO.7.76.6.1905131531000.44@tvgsbejvaqbjf.bet/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code tightening against a "wrong" object appearing where an object
of a different type is expected, instead of blindly assuming that
the connection between objects are correctly made.
* tb/unexpected:
rev-list: detect broken root trees
rev-list: let traversal die when --missing is not in use
get_commit_tree(): return NULL for broken tree
list-objects.c: handle unexpected non-tree entries
list-objects.c: handle unexpected non-blob entries
t: introduce tests for unexpected object types
t: move 'hex2oct' into test-lib-functions.sh
Test framework update to more robustly clean up leftover files and
processes after tests are done.
* sg/test-atexit:
t9811-git-p4-label-import: fix pipeline negation
git p4 test: disable '-x' tracing in the p4d watchdog loop
git p4 test: simplify timeout handling
git p4 test: clean up the p4d cleanup functions
git p4 test: use 'test_atexit' to kill p4d and the watchdog process
t0301-credential-cache: use 'test_atexit' to stop the credentials helper
tests: use 'test_atexit' to stop httpd
git-daemon: use 'test_atexit` to stop 'git-daemon'
test-lib: introduce 'test_atexit'
t/lib-git-daemon: make sure to kill the 'git-daemon' process
test-lib: fix interrupt handling with 'dash' and '--verbose-log -x'
The helper 'hex2oct' is used to convert base-16 encoded data into a
base-8 binary form, and is useful for preparing data for commands that
accept input in a binary format, such as 'git hash-object', via
'printf'.
This helper is defined identically in three separate places throughout
't'. Move the definition to test-lib-function.sh, so that it can be used
in new test suites, and its definition is not redundant.
This will likewise make our job easier in the subsequent commit, which
also uses 'hex2oct'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running Apache, 'git daemon', or p4d, we want to kill them at the
end of the test script, otherwise a leftover daemon process will keep
its port open indefinitely, and thus will interfere with subsequent
executions of the same test script.
So far, we stop these daemon processes "manually", i.e.:
- by registering functions or commands in the trap on EXIT to stop
the daemon while preserving the last seen exit code before the
trap (to deal with a failure when run with '--immediate' or with
interrupts by ctrl-C),
- and by invoking these functions/commands last thing before
'test_done' (and sometimes restoring the test framework's default
trap on EXIT, to prevent the daemons from being killed twice).
On one hand, we do this inconsistently, e.g. 'git p4' tests invoke
different functions in the trap on EXIT and in the last test before
'test_done', and they neither restore the test framework's default trap
on EXIT nor preserve the last seen exit code. On the other hand, this
is error prone, because, as shown in a previous patch in this series,
any output from the cleanup commands in the trap on EXIT can prevent a
proper cleanup when a test script run with '--verbose-log' and certain
shells, notably 'dash', is interrupted.
Let's introduce 'test_atexit', which is loosely modeled after
'test_when_finished', but has a broader scope: rather than running the
commands after the current test case, run them when the test script
finishes, and also run them when the test is interrupted, or exits
early in case of a failure while the '--immediate' option is in
effect.
When running the cleanup commands at the end of a successful test,
then they will be run in 'test_done' before it removes the trash
directory, i.e. the cleanup commands will still be able to access any
pidfiles or socket files in there. When running the cleanup commands
after an interrupt or failure with '--immediate', then they will be
run in the trap on EXIT. In both cases they will be run in
'test_eval_', i.e. both standard error and output of all cleanup
commands will go where they should according to the '-v' or
'--verbose-log' options, and thus won't cause any troubles when
interrupting a test script run with '--verbose-log'.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a helper function to ensure that a given path is a non-empty file,
and give an error message when it is not.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cc95bc2025 (t5562: replace /dev/zero with a pipe from
generate_zero_bytes, 2019-02-09), we replaced usage of /dev/zero (which
is not available on NonStop, apparently) by a Perl script snippet to
generate NUL bytes.
Sadly, it does not seem to work on NonStop, as t5562 reportedly hangs.
Worse, this also hangs in the Ubuntu 16.04 agents of the CI builds on
Azure Pipelines: for some reason, the Perl script snippet that is run
via `generate_zero_bytes` in t5562's 'CONTENT_LENGTH overflow ssite_t'
test case tries to write out an infinite amount of NUL bytes unless a
broken pipe is encountered, that snippet never encounters the broken
pipe, and keeps going until the build times out.
Oddly enough, this does not reproduce on the Windows and macOS agents,
nor in a local Ubuntu 18.04.
This developer tried for a day to figure out the exact circumstances
under which this hang happens, to no avail, the details remain a
mystery.
In the end, though, what counts is that this here change incidentally
fixes that hang (maybe also on NonStop?). Even more positively, it gets
rid of yet another unnecessary Perl invocation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rb/no-dev-zero-in-test:
t5562: replace /dev/zero with a pipe from generate_zero_bytes
t5318: replace use of /dev/zero with generate_zero_bytes
test-lib-functions.sh: add generate_zero_bytes function
t5318 and t5562 used /dev/zero, which is not portable. This function
provides both a fixed block of NUL bytes and an infinite stream of NULs.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a '!' character to start a non-matching pattern bracket
expression, as specified by POSIX in Shell Command Language section
2.13.1 Patterns Matching a Single Character [1].
I used '^' instead in three places in the previous three commits, to
verify that the arguments of the '--stress=' and '--stress-limit='
options and the values of various '*_PORT' environment variables are
valid numbers. With certain shells, at least with dash (upstream and
in Ubuntu 14.04) and mksh, this led to various undesired behaviors:
# error message in case of a valid number
$ ~/src/dash/src/dash ./t3903-stash.sh --stress=8
error: --stress=<N> requires the number of jobs to run
# not the expected error message
$ ~/src/dash/src/dash ./t3903-stash.sh --stress=foo
./t3903-stash.sh: 238: test: Illegal number: foo
# no error message at all?!
$ mksh ./t3903-stash.sh --stress=foo
$ echo $?
0
Some other shells, e.g. Bash (even in posix mode), ksh, dash in Ubuntu
16.04 or later, are apparently happy to accept '^' just as well.
[1] http://pubs.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html#tag_02_13
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately, we have a few flaky tests, whose failures tend to be
hard to reproduce. We've found that the best we can do to reproduce
such a failure is to run the test script repeatedly while the machine
is under load, and wait in the hope that the load creates enough
variance in the timing of the test's commands that a failure is
evenually triggered. I have a command to do that, and I noticed that
two other contributors have rolled their own scripts to do the same,
all choosing slightly different approaches.
To help reproduce failures in flaky tests, introduce the '--stress'
option to run a test script repeatedly in multiple parallel jobs until
one of them fails, thereby using the test script itself to increase
the load on the machine.
The number of parallel jobs is determined by, in order of precedence:
the number specified as '--stress=<N>', or the value of the
GIT_TEST_STRESS_LOAD environment variable, or twice the number of
available processors (as reported by the 'getconf' utility), or 8.
Make '--stress' imply '--verbose -x --immediate' to get the most
information about rare failures; there is really no point in spending
all the extra effort to reproduce such a failure, and then not know
which command failed and why.
To prevent the several parallel invocations of the same test from
interfering with each other:
- Include the parallel job's number in the name of the trash
directory and the various output files under 't/test-results/' as
a '.stress-<Nr>' suffix.
- Add the parallel job's number to the port number specified by the
user or to the test number, so even tests involving daemons
listening on a TCP socket can be stressed.
- Redirect each parallel test run's verbose output to
't/test-results/$TEST_NAME.stress-<nr>.out', because dumping the
output of several parallel running tests to the terminal would
create a big ugly mess.
For convenience, print the output of the failed test job at the end,
and rename its trash directory to end with the '.stress-failed'
suffix, so it's easy to find in a predictable path (OTOH, all absolute
paths recorded in the trash directory become invalid; we'll see
whether this causes any issues in practice). If, in an unlikely case,
more than one jobs were to fail nearly at the same time, then print
the output of all failed jobs, and rename the trash directory of only
the last one (i.e. with the highest job number), as it is the trash
directory of the test whose output will be at the bottom of the user's
terminal.
Based on Jeff King's 'stress' script.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several test scripts run daemons like 'git-daemon' or Apache, and
communicate with them through TCP sockets. To have unique ports where
these daemons are accessible, the ports are usually the number of the
corresponding test scripts, unless the user overrides them via
environment variables, and thus all those tests and test libs contain
more or less the same bit of one-liner boilerplate code to find out
the port. The last patch in this series will make this a bit more
complicated.
Factor out finding the port for a daemon into the common helper
function 'test_set_port' to avoid repeating ourselves.
Take special care of test scripts with "low" numbers:
- Test numbers below 1024 would result in a port that's only usable
as root, so set their port to '10000 + test-nr' to make sure it
doesn't interfere with other tests in the test suite. This makes
the hardcoded port number in 't0410-partial-clone.sh' unnecessary,
remove it.
- The shell's arithmetic evaluation interprets numbers with leading
zeros as octal values, which means that test number below 1000 and
containing the digits 8 or 9 will trigger an error. Remove all
leading zeros from the test numbers to prevent this.
Note that the 'git p4' tests are unlike the other tests involving
daemons in that:
- 'lib-git-p4.sh' doesn't use the test's number for unique port as
is, but does a bit of additional arithmetic on top [1].
- The port is not overridable via an environment variable.
With this patch even 'git p4' tests will use the test's number as
default port, and it will be overridable via the P4DPORT environment
variable.
[1] Commit fc00233071 (git-p4 tests: refactor and cleanup, 2011-08-22)
introduced that "unusual" unique port computation without
explaining why it was necessary (as opposed to simply using the
test number as is). It seems to be just unnecessary complication,
and in any case that commit came way before the "test nr as unique
port" got "standardized" for other daemons in commits c44132fcf3
(tests: auto-set git-daemon port, 2014-02-10), 3bb486e439 (tests:
auto-set LIB_HTTPD_PORT from test name, 2014-02-10), and
bf9d7df950 (t/lib-git-svn.sh: improve svnserve tests with parallel
make test, 2017-12-01).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test framework has been updated to make a bug in the test script
(as opposed to bugs in Git that are discovered by running the
tests) stand out more prominently.
* sg/test-BUG:
tests: send "bug in the test script" errors to the script's stderr
The 'test_cmp_rev' helper is merely a wrapper around 'test_cmp'
checking the output of two 'git rev-parse' commands, which means that
its output on failure is not particularly informative, as it's
basically two OIDs with a bit of extra clutter of the diff header, but
without any indication of which two revisions have caused the failure:
--- expect.rev 2018-11-17 14:02:11.569747033 +0000
+++ actual.rev 2018-11-17 14:02:11.569747033 +0000
@@ -1 +1 @@
-d79ce1670bdcb76e6d1da2ae095e890ccb326ae9
+139b20d8e6c5b496de61f033f642d0e3dbff528d
It also pollutes the test repo with these two intermediate files,
though that doesn't seem to cause any complications in our current
tests (meaning that I couldn't find any tests that have to work around
the presence of these files by explicitly removing or ignoring them).
Enhance 'test_cmp_rev' to provide a more useful output on failure with
less clutter:
error: two revisions point to different objects:
'HEAD^': d79ce1670bdcb76e6d1da2ae095e890ccb326ae9
'extra': 139b20d8e6c5b496de61f033f642d0e3dbff528d
Doing so is more convenient when storing the OIDs outputted by 'git
rev-parse' in a local variable each, which, as a bonus, won't pollute
the repository with intermediate files.
While at it, also ensure that 'test_cmp_rev' is invoked with the right
number of parameters, namely two.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the functions in our test library check that they were invoked
properly with conditions like this:
test "$#" = 2 ||
error "bug in the test script: not 2 parameters to test-expect-success"
If this particular condition is triggered, then 'error' will abort the
whole test script with a bold red error message [1] right away.
However, under certain circumstances the test script will be aborted
completely silently, namely if:
- a similar condition in a test helper function like
'test_line_count' is triggered,
- which is invoked from the test script's "main" shell [2],
- and the test script is run manually (i.e. './t1234-foo.sh' as
opposed to 'make t1234-foo.sh' or 'make test') [3]
- and without the '--verbose' option,
because the error message is printed from within 'test_eval_', where
standard output is redirected either to /dev/null or to a log file.
The only indication that something is wrong is that not all tests in
the script are executed and at the end of the test script's output
there is no "# passed all N tests" message, which are subtle and can
easily go unnoticed, as I had to experience myself.
Send these "bug in the test script" error messages directly to the
test scripts standard error and thus to the terminal, so those bugs
will be much harder to overlook. Instead of updating all ~20 such
'error' calls with a redirection, let's add a BUG() function to
'test-lib.sh', wrapping an 'error' call with the proper redirection
and also including the common prefix of those error messages, and
convert all those call sites [4] to use this new BUG() function
instead.
[1] That particular error message from 'test_expect_success' is
printed in color only when running with or without '--verbose';
with '--tee' or '--verbose-log' the error is printed without
color, but it is printed to the terminal nonetheless.
[2] If such a condition is triggered in a subshell of a test, then
'error' won't be able to abort the whole test script, but only the
subshell, which in turn causes the test to fail in the usual way,
indicating loudly and clearly that something is wrong.
[3] Well, 'error' aborts the test script the same way when run
manually or by 'make' or 'prove', but both 'make' and 'prove' pay
attention to the test script's exit status, and even a silently
aborted test script would then trigger those tools' usual
noticable error messages.
[4] Strictly speaking, not all those 'error' calls need that
redirection to send their output to the terminal, see e.g.
'test_expect_success' in the opening example, but I think it's
better to be consistent.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the "test installed Git" mode of our test suite to work better.
* js/test-git-installed:
tests: explicitly use `git.exe` on Windows
tests: do not require Git to be built when testing an installed Git
t/lib-gettext: test installed git-sh-i18n if GIT_TEST_INSTALLED is set
tests: respect GIT_TEST_INSTALLED when initializing repositories
tests: fix GIT_TEST_INSTALLED's PATH to include t/helper/
Our testing framework uses a special i18n "poisoned localization"
feature to find messages that ought to stay constant but are
incorrectly marked to be translated. This feature has been made
into a runtime option (it used to be a compile-time option).
* ab/dynamic-gettext-poison:
Makefile: ease dynamic-gettext-poison transition
i18n: make GETTEXT_POISON a runtime option
On Windows, when we refer to `/an/absolute/path/to/git`, it magically
resolves `git.exe` at that location. Except if something of the name
`git` exists next to that `git.exe`. So if we call `$BUILD_DIR/git`, it
will find `$BUILD_DIR/git.exe` *only* if there is not, say, a directory
called `$BUILD_DIR/git`.
Such a directory, however, exists in Git for Windows when building with
Visual Studio (our Visual Studio project generator defaults to putting
the build files into a directory whose name is the base name of the
corresponding `.exe`).
In the bin-wrappers/* scripts, we already take pains to use `git.exe`
rather than `git`, as this could pick up the wrong thing on Windows
(i.e. if there exists a `git` file or directory in the build directory).
Now we do the same in the tests' start-up code.
This also helps when testing an installed Git, as there might be even
more likely some stray file or directory in the way.
Note: the only way we can record whether the `.exe` suffix is by writing
it to the `GIT-BUILD-OPTIONS` file and sourcing it at the beginning of
`t/test-lib.sh`. This is not a requirement introduced by this patch, but
we move the call to be able to use the `$X` variable that holds the file
extension, if any.
Note also: the many, many calls to `git this` and `git that` are
unaffected, as the regular PATH search will find the `.exe` files on
Windows (and not be confused by a directory of the name `git` that is
in one of the directories listed in the `PATH` variable), while
`/path/to/git` would not, per se, know that it is looking for an
executable and happily prefer such a directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It really makes very, very little sense to use a different git
executable than the one the caller indicated via setting the environment
variable GIT_TEST_INSTALLED.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the GETTEXT_POISON compile-time + runtime GIT_GETTEXT_POISON
test parameter to only be a GIT_TEST_GETTEXT_POISON=<non-empty?>
runtime parameter, to be consistent with other parameters documented
in "Running tests with special setups" in t/README.
When I added GETTEXT_POISON in bb946bba76 ("i18n: add GETTEXT_POISON
to simulate unfriendly translator", 2011-02-22) I was concerned with
ensuring that the _() function would get constant folded if NO_GETTEXT
was defined, and likewise that GETTEXT_POISON would be compiled out
unless it was defined.
But as the benchmark in my [1] shows doing a one-off runtime
getenv("GIT_TEST_[...]") is trivial, and since GETTEXT_POISON was
originally added the GIT_TEST_* env variables have become the common
idiom for turning on special test setups.
So change GETTEXT_POISON to work the same way. Now the
GETTEXT_POISON=YesPlease compile-time option is gone, and running the
tests with GIT_TEST_GETTEXT_POISON=[YesPlease|] can be toggled on/off
without recompiling.
This allows for conditionally amending tests to test with/without
poison, similar to what 859fdc0c3c ("commit-graph: define
GIT_TEST_COMMIT_GRAPH", 2018-08-29) did for GIT_TEST_COMMIT_GRAPH. Do
some of that, now we e.g. always run the t0205-gettext-poison.sh test.
I did enough there to remove the GETTEXT_POISON prerequisite, but its
inverse C_LOCALE_OUTPUT is still around, and surely some tests using
it can be converted to e.g. always set GIT_TEST_GETTEXT_POISON=.
Notes on the implementation:
* We still compile a dedicated GETTEXT_POISON build in Travis
CI. Perhaps this should be revisited and integrated into the
"linux-gcc" build, see ae59a4e44f ("travis: run tests with
GIT_TEST_SPLIT_INDEX", 2018-01-07) for prior art in that area. Then
again maybe not, see [2].
* We now skip a test in t0000-basic.sh under
GIT_TEST_GETTEXT_POISON=YesPlease that wasn't skipped before. This
test relies on C locale output, but due to an edge case in how the
previous implementation of GETTEXT_POISON worked (reading it from
GIT-BUILD-OPTIONS) wasn't enabling poison correctly. Now it does,
and needs to be skipped.
* The getenv() function is not reentrant, so out of paranoia about
code of the form:
printf(_("%s"), getenv("some-env"));
call use_gettext_poison() in our early setup in git_setup_gettext()
so we populate the "poison_requested" variable in a codepath that's
won't suffer from that race condition.
* We error out in the Makefile if you're still saying
GETTEXT_POISON=YesPlease to prompt users to change their
invocation.
* We should not print out poisoned messages during the test
initialization itself to keep it more readable, so the test library
hides the variable if set in $GIT_TEST_GETTEXT_POISON_ORIG during
setup. See [3].
See also [4] for more on the motivation behind this patch, and the
history of the GETTEXT_POISON facility.
1. https://public-inbox.org/git/871s8gd32p.fsf@evledraar.gmail.com/
2. https://public-inbox.org/git/20181102163725.GY30222@szeder.dev/
3. https://public-inbox.org/git/20181022202241.18629-2-szeder.dev@gmail.com/
4. https://public-inbox.org/git/878t2pd6yu.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many config-related tests it's common to check if a config variable
has expected value and we want to print the differences when the test
fails. Doing it the normal way is three lines of shell code. Let's add
a function do to all this (and a little more).
This function has uses outside t1300 as well but I'm not going to
convert them all. And it will be used in the next commit where
per-worktree config feature is introduced.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various tests have been updated to make it easier to swap the
hash function used for object identification.
* bc/hash-independent-tests:
t5318: use test_oid for HASH_LEN
t1407: make hash size independent
t1406: make hash-size independent
t1405: make hash size independent
t1400: switch hard-coded object ID to variable
t1006: make hash size independent
t0064: make hash size independent
t0002: abstract away SHA-1 specific constants
t0000: update tests for SHA-256
t0000: use hash translation table
t: add test functions to translate hash-related values
The color output support for recently introduced "range-diff"
command got tweaked a bit.
* sb/range-diff-colors:
range-diff: indent special lines as context
range-diff: make use of different output indicators
diff.c: add --output-indicator-{new, old, context}
diff.c: rewrite emit_line_0 more understandably
diff.c: omit check for line prefix in emit_line_0
diff: use emit_line_0 once per line
diff.c: add set_sign to emit_line_0
diff.c: reorder arguments for emit_line_ws_markup
diff.c: simplify caller of emit_line_0
t3206: add color test for range-diff --dual-color
test_decode_color: understand FAINT and ITALIC
Add several test functions to make working with various hash-related
values easier.
Add test_oid_init, which loads common hash-related constants and
placeholder object IDs from the newly added files in t/oid-info.
Provide values for these constants for both SHA-1 and SHA-256.
Add test_oid_cache, which accepts data on standard input in the form of
hash-specific key-value pairs that can be looked up later, using the
same format as the files in t/oid-info. Document this format in a
t/oid-info/README directory so that it's easier to use in the future.
Add test_oid, which is used to specify look up a per-hash value
(produced on standard output) based on the key specified as its
argument. Usually the data to be looked up will be a hash-related
constant (such as the size of the hash in binary or hexadecimal), a
well-known or placeholder object ID (such as the all-zeros object ID or
one consisting of "deadbeef" repeated), or something similar. For these
reasons, test_oid will usually be used within a command substitution.
Consequently, redirect the error output to standard error, since
otherwise it will not be displayed.
Add test_detect_hash, which currently only detects SHA-1, and
test_set_hash, which can be used to set a different hash algorithm for
test purposes. In the future, test_detect_hash will learn to actually
detect the hash depending on how the testsuite is to be run.
Use the local keyword within these functions to avoid overwriting other
shell variables. We have had a test balloon in place for a couple of
releases to catch shells that don't have this keyword and have not
received any reports of failure. Note that the varying usages of local
used here are supported by all common open-source shells supporting the
local keyword.
Test these new functions as part of t0000, which also serves to
demonstrate basic usage of them. In addition, add documentation on how
to format the lookup data and how to use the test functions.
Implement two basic lookup charts, one for common invalid or synthesized
object IDs, and one for various facts about the hash function in use.
Provide versions of the data for both SHA-1 and SHA-256.
Since we use shell variables for storage, names used for lookup can
currently consist only of shell identifier characters. If this is a
problem in the future, we can hash the names before use.
Improved-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test -e, test -s, etc. do not provide nice error messages when we hit
test failures, so use the test_* helper functions from
test-lib-functions.sh.
Also, add test_path_exists() to test-lib-function.sh while at it, so
that we don't need to worry whether submodule/.git is a file or a
directory. It currently is a file with contents of the form
gitdir: ../.git/modules/submodule
but it could be changed in the future to be a directory; this test
only really cares that it exists.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While working on the --convert-graft-file test, I missed that I was
relying on the GPG prereq, by using output of test cases that were only
run under that prereq.
For debugging, it was really convenient to force that prereq to be
unmet, but there was no easy way to do that. So I came up with a way,
and this patch reflects the cleaned-up version of that way.
For convenience, the following two methods are now supported ways to
pretend that a prereq is not met:
test_set_prereq !GPG
and
test_unset_prereq GPG
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to run git, when using the script from bin-wrappers, under
other programs. A few examples for usage within testsuite scripts:
debug git checkout master
debug --debugger=nemiver git $ARGS
debug -d "valgrind --tool-memcheck --track-origins=yes" git $ARGS
Or, if someone has bin-wrappers/ in their $PATH and is executing git
outside the testsuite:
GIT_DEBUGGER="gdb --args" git $ARGS
GIT_DEBUGGER=nemiver git $ARGS
GIT_DEBUGGER="valgrind --tool=memcheck --track-origins=yes" git $ARGS
There is also a handy shortcut of GIT_DEBUGGER=1 meaning the same as
GIT_DEBUGGER="gdb --args"
Original-patch-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 11395a3b4b (test_must_be_empty: make sure the file exists, not
just empty, 2018-02-27) basically duplicated the 'test_path_is_file'
helper function in 'test_must_be_empty'.
Just call 'test_path_is_file' to avoid this code duplication.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running test scripts under -x option of the shell is often not a
useful way to debug them, because the error messages from the
commands tests try to capture and inspect are contaminated by the
tracing output by the shell. An earlier work done to make it more
pleasant to run tests under -x with recent versions of bash is
extended to cover posix shells that do not support BASH_XTRACEFD.
* sg/test-x:
travis-ci: run tests with '-x' tracing
t/README: add a note about don't saving stderr of compound commands
t1510-repo-setup: mark as untraceable with '-x'
t9903-bash-prompt: don't check the stderr of __git_ps1()
t5570-git-daemon: don't check the stderr of a subshell
t5526: use $TRASH_DIRECTORY to specify the path of GIT_TRACE log file
t5500-fetch-pack: don't check the stderr of a subshell
t3030-merge-recursive: don't check the stderr of a subshell
t1507-rev-parse-upstream: don't check the stderr of a shell function
t: add means to disable '-x' tracing for individual test scripts
t: prevent '-x' tracing from interfering with test helpers' stderr
The helper function test_must_be_empty is meant to make sure the
given file is empty, but its implementation is:
if test -s "$1"
then
... not empty, we detected a failure ...
fi
Surely, the file having non-zero size is a sign that the condition
"the file must be empty" is violated, but it misses the case where
the file does not even exist. It is an accident waiting to happen
with a buggy test like this:
git frotz 2>error-message &&
test_must_be_empty errro-message
that won't get caught until you deliberately break 'git frotz' and
notice why the test does not fail.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running a test script with '-x' turns on 'set -x' tracing, the output
of which is normally sent to stderr. This causes a lot of
test failures, because many tests redirect and verify the stderr
of shell functions, most frequently that of 'test_must_fail'.
These issues were worked around somewhat in d88785e424 (test-lib: set
BASH_XTRACEFD automatically, 2016-05-11), so at least we could
reliably run tests with '-x' tracing under a Bash version supporting
BASH_XTRACEFD, i.e. v4.1 and later.
Futhermore, redirecting the stderr of test helper functions like
'test_must_fail' or 'test_expect_code' is the cause of a different
issue as well. If these functions detect something unexpected, they
will write their error messages intended to the user to thier stderr.
However, if their stderr is redirected in order to save and verify the
stderr of the tested git command invoked in the function, then the
function's error messages will be redirected as well. Consequently,
those messages won't reach the user, making the test's verbose output
less useful.
This patch makes it safe to redirect and verify the stderr of those
test helper functions which are meant to run the tested command given
as argument, even when running tests with '-x' and /bin/sh. This is
achieved through a couple of file descriptor redirections:
- Duplicate stderr of the tested command executed in the test helper
function from the function's fd 7 (see next point), to ensure that
the tested command's error messages go to a different fd than the
'-x' trace of the commands executed in the function or the
function's error messages.
- Duplicate the test helper function's fd 7 from the function's
original stderr, meaning that, after taking a detour through fd 7,
the error messages of the tested command do end up on the
function's original stderr.
- Duplicate stderr of the test helper function from fd 4, i.e. the
fd connected to the test script's original stderr and the fd used
for BASH_XTRACEFD. This ensures that the '-x' trace of the
commands executed in the function
- doesn't go to the function's original stderr, so it won't mess
with callers who want to save and verify the tested command's
stderr.
- does go to the same fd independently from the shell running
the test script, be it /bin/sh, an older Bash without
BASH_XTRACEFD, or a more recent Bash already supporting
BASH_XTRACEFD.
Furthermore, this also makes sure that the function's error
messages go to this fd 4, meaning that the user will be able to
see them even if the function's stderr is redirected in the test.
- Specify the latter two redirections above in the test helper
function's definition, so they are performed every time the
function is invoked, without the need to modify the callsites of
the function.
Perform these redirections in those test helper functions which can be
expected to have their stderr redirected, i.e. in the functions
'test_must_fail', 'test_might_fail', 'test_expect_code', 'test_env',
'nongit', 'test_terminal' and 'perl'. Note that 'test_might_fail',
'test_env', and 'nongit' are not involved in any test failures when
running tests with '-x' and /bin/sh.
The other test helper functions are left unchanged, because they
either don't run commands specified as their arguments, or redirecting
their stderr wouldn't make sense, or both.
With this change the number of failures when running the test suite
with '-x' tracing and /bin/sh goes down from 340 failed tests in 43
test scripts to 22 failed tests in 6 scripts (or 23 in 7, if the
system (OSX) uses an older Bash version without BASH_XTRACEFD to run
't9903-bash-prompt.sh').
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test helper functions like test_must_fail may produce
messages to stderr when they see a problem. When the tests
are run with "--verbose", this ends up on the test script's
stderr, and the user can read it.
But there's a problem. Some tests record stderr as part of
the test, like:
test_must_fail git foo 2>output &&
test_i18ngrep expected.message output
In this case the error text goes into "output". This makes
the --verbose output less useful (it also means we might
accidentally match it in the second, though in practice we
tend to produce these messages only on error, so we'd abort
the test when the first command fails).
Let's instead send this user-facing output directly to
descriptor 4, which always points to the original stderr (or
/dev/null in non-verbose mode). And it's already forbidden
to redirect descriptor 4, since we use it for BASH_XTRACEFD,
as explained in 9be795fbce (t5615: avoid re-using descriptor
4, 2017-12-08).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test fixes.
* sg/test-i18ngrep:
t: make 'test_i18ngrep' more informative on failure
t: validate 'test_i18ngrep's parameters
t: move 'test_i18ncmp' and 'test_i18ngrep' to 'test-lib-functions.sh'
t5536: let 'test_i18ngrep' read the file without redirection
t5510: consolidate 'grep' and 'test_i18ngrep' patterns
t4001: don't run 'git status' upstream of a pipe
t6022: don't run 'git merge' upstream of a pipe
t5812: add 'test_i18ngrep's missing filename parameter
t5541: add 'test_i18ngrep's missing filename parameter
Since 'test_might_fail' is implemented as a thin wrapper around
'test_must_fail', it also accepts the same options. Mention this in
the docs as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'test_i18ngrep' can't find the expected pattern, it exits
completely silently; when its negated form does find the pattern that
shouldn't be there, it prints the matching line(s) but otherwise exits
without any error message. This leaves the developer puzzled about
what could have gone wrong.
Make 'test_i18ngrep' more informative on failure by printing an error
message including the invoked 'grep' command and the contents of the
file it had to scan through.
Note that this "dump the scanned file" part is not quite perfect, as
it dumps only the file specified as the function's last positional
parameter, thus assuming that there is only a single file parameter.
I think that's a reasonable assumption to make, one that holds true in
the current code base. And even if someone were to scan multiple
files at once in the future, the worst thing that could happen is that
the verbose error message won't include the contents of all those
files, only the last one. Alas, we can't really do any better than
this, because checking whether the other positional parameters match a
filename can result in false positives: 't3400-rebase.sh' and
't3404-rebase-interactive.sh' contain one test each, where the
'test_i18ngrep's pattern verbatimly matches a file in the trash
directory.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the previous patches in this series fixed bogus
'test_i18ngrep' invocations:
- Two invocations where the tested git command's standard output is
directly piped into 'test_i18ngrep'. While convenient, this is an
antipattern, because the pipe hides the git command's exit code,
and the test could continue even if the command exited with error.
- Two invocations that had neither a filename parameter nor anything
piped into their standard input, yet both managed to remain
unnoticed for years. A third similarly bogus invocation is
currently lurking in 'pu' for a couple of weeks now.
Prevent similar mistakes in the future by validating 'test_i18ngrep's
parameters requiring that
- The last parameter names an existing file to be read, effectively
forbidding piping into 'test_i18ngrep'.
Note that this change will also forbid cases where 'test_i18ngrep'
would legitimately read its standard input, e.g. when its standard
input is redirected from a file, or when a git command's standard
output is first written to an intermediate file, which is then
preprocessed by a non-git command before the results are piped
into 'test_i18ngrep'. See two of the previous patches for the
only such cases we had in our test suite. However, reliably
preventing the piping antipattern is arguably more important than
supporting these cases, which can be easily worked around by
opening the file directly or using an intermediate file anyway.
- There are at least two parameters, not including the optional '!'
to negate the pattern. This ought to catch corner cases when
'test_i18ngrep' looks for the name of an existing file on its
standard input; the above check would miss this case becase the
filename as pattern would be the last parameter.
Note that this is not quite perfect, as it doesn't account for any
'grep --options' given as parameters. However, doing so would be
far too complicated, considering that patterns can start with
dashes as well, and in the majority of the cases we don't use any
such options anyway.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both 'test_i18ncmp' and 'test_i18ngrep' helper functions are supposed
to be called from our test scripts, so they should be in
'test-lib-functions.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of our git-protocol tests rely on invoking the client
and having it make a request of a server. That gives a nice
real-world test of how the two behave together, but it
doesn't leave any room for testing how a server might react
to _other_ clients.
Let's add a few test helper functions which can be used to
manually conduct a git-protocol conversation with a remote
git-daemon:
1. To connect to a remote git-daemon, we need something
like "netcat". But not everybody will have netcat. And
even if they do, the behavior with respect to
half-duplex shutdowns is not portable (openbsd netcat
has "-N", with others you must rely on "-q 1", which is
racy).
Here we provide a "fake_nc" that is capable of doing
a client-side netcat, with sane half-duplex semantics.
It relies on perl's IO::Socket::INET. That's been in
the base distribution since 5.6.0, so it's probably
available everywhere. But just to be on the safe side,
we'll add a prereq.
2. To help tests speak and read pktline, this patch adds
packetize() and depacketize() functions.
I've put fake_nc() into lib-git-daemon.sh, since that's
really the only server where we'd need to use a network
socket. Whereas the pktline helpers may be of more general
use, so I've added them to test-lib-functions.sh. Programs
like upload-pack speak pktline, but can talk directly over
stdio without a network socket.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"%C(color name)" in the pretty print format always produced ANSI
color escape codes, which was an early design mistake. They now
honor the configuration (e.g. "color.ui = never") and also tty-ness
of the output medium.
* jk/ref-filter-colors:
ref-filter: consult want_color() before emitting colors
pretty: respect color settings for %C placeholders
rev-list: pass diffopt->use_colors through to pretty-print
for-each-ref: load config earlier
color: check color.ui in git_default_config()
ref-filter: pass ref_format struct to atom parsers
ref-filter: factor out the parsing of sorting atoms
ref-filter: make parse_ref_filter_atom a private function
ref-filter: provide a function for parsing sort options
ref-filter: move need_color_reset_at_eol into ref_format
ref-filter: abstract ref format into its own struct
ref-filter: simplify automatic color reset
t: use test_decode_color rather than literal ANSI codes
docs/for-each-ref: update pointer to color syntax
check return value of verify_ref_format()
"%C(color name)" in the pretty print format always produced ANSI
color escape codes, which was an early design mistake. They now
honor the configuration (e.g. "color.ui = never") and also tty-ness
of the output medium.
* jk/ref-filter-colors:
ref-filter: consult want_color() before emitting colors
pretty: respect color settings for %C placeholders
rev-list: pass diffopt->use_colors through to pretty-print
for-each-ref: load config earlier
color: check color.ui in git_default_config()
ref-filter: pass ref_format struct to atom parsers
ref-filter: factor out the parsing of sorting atoms
ref-filter: make parse_ref_filter_atom a private function
ref-filter: provide a function for parsing sort options
ref-filter: move need_color_reset_at_eol into ref_format
ref-filter: abstract ref format into its own struct
ref-filter: simplify automatic color reset
t: use test_decode_color rather than literal ANSI codes
docs/for-each-ref: update pointer to color syntax
check return value of verify_ref_format()
The test_copy_bytes() function claims to read up to N bytes,
or until it gets EOF. But we never handle EOF in our loop,
and a short input will cause perl to go into an infinite
loop of read() getting zero bytes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we put literal ANSI terminal codes into our test
scripts, it makes diffs on those scripts hard to read (the
colors may be indistinguishable from diff coloring, or in
the case of a reset, may not be visible at all).
Some scripts get around this by including human-readable
names and converting to literal codes with a git-config
hack. This makes the actual code diffs look OK, but test_cmp
output suffers from the same problem.
Let's use test_decode_color instead, which turns the codes
into obvious text tags.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the modebits() function can be useful outside t1301,
let's move it into test-lib-functions.sh, and while at
it let's rename it test_modebits().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the 'test_pause' helper function invokes the shell mid-test, it
explicitly redirects the shell's stdout and stderr to file descriptors
3 and 4, which are the stdout and stderr of the tests (i.e. where they
would be connected anyway without those redirections). These file
descriptors are only attached to the terminal in verbose mode, hence
the restriction of 'test_pause' to work only with '-v'.
Redirect the shell's stdout and stderr to the test environment's
original stdout and stderr, allowing it to work properly even in
non-verbose mode, and the restriction can be lifted.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
