Replace uses of the synonym --staged in t1092 tests with --cached (which
is the real and preferred option). This will allow consistency in the new
tests to be added with the upcoming change to enable the sparse index for
diff.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check whether git directory exists before adding any repo settings. If it
does not exist, BUG with the message that one cannot add settings for an
uninitialized repository. If it does exist, proceed with adding repo
settings.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move repo setup to occur after git directory is set up. This will protect
against test failures in the upcoming change to BUG in
prepare_repo_settings if no git directory exists.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Return early if git directory does not exist. This will protect against
test failures in the upcoming change to BUG in prepare_repo_settings if no
git directory exists.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ensure correct git directory setup when -h is passed with commands. This
specifically applies to repos with special help text configuration
variables and to commands run with -h outside a repository. This
will also protect against test failures in the upcoming change to BUG in
prepare_repo_settings if no git directory exists.
Note: this diff is better seen when ignoring whitespace changes.
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* vd/sparse-reset:
unpack-trees: improve performance of next_cache_entry
reset: make --mixed sparse-aware
reset: make sparse-aware (except --mixed)
reset: integrate with sparse index
reset: expand test coverage for sparse checkouts
sparse-index: update command for expand/collapse test
reset: preserve skip-worktree bit in mixed reset
reset: rename is_missing to !is_in_reset_tree
To find the first non-unpacked cache entry, `next_cache_entry` iterates
through index, starting at `cache_bottom`. The performance of this in full
indexes is helped by `cache_bottom` advancing with each invocation of
`mark_ce_used` (called by `unpack_index_entry`). However, the presence of
sparse directories can prevent the `cache_bottom` from advancing in a sparse
index case, effectively forcing `next_cache_entry` to search from the
beginning of the index each time it is called.
The `cache_bottom` must be preserved for the sparse index (see 17a1bb570b
(unpack-trees: preserve cache_bottom, 2021-07-14)). Therefore, to retain the
benefit `cache_bottom` provides in non-sparse index cases, a separate `hint`
position indicates the first position `next_cache_entry` should search,
updated each execution with a new position.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `ensure_full_index` guard on `read_from_tree` and update `git
reset --mixed` to ensure it can use sparse directory index entries wherever
possible. Sparse directory entries are reset using `diff_tree_oid`, which
requires `change` and `add_remove` functions to process the internal
contents of the sparse directory. The `recursive` diff option handles cases
in which `reset --mixed` must diff/merge files that are nested multiple
levels deep in a sparse directory.
The use of pathspecs with `git reset --mixed` introduces scenarios in which
internal contents of sparse directories may be matched by the pathspec. In
order to reset *all* files in the repo that may match the pathspec, the
following conditions on the pathspec require index expansion before
performing the reset:
* "magic" pathspecs
* wildcard pathspecs that do not match only in-cone files or entire sparse
directories
* literal pathspecs matching something outside the sparse checkout
definition
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove `ensure_full_index` guard on `prime_cache_tree` and update
`prime_cache_tree_rec` to correctly reconstruct sparse directory entries in
the cache tree. While processing a tree's entries, `prime_cache_tree_rec`
must determine whether a directory entry is sparse or not by searching for
it in the index (*without* expanding the index). If a matching sparse
directory index entry is found, no subtrees are added to the cache tree
entry and the entry count is set to 1 (representing the sparse directory
itself). Otherwise, the tree is assumed to not be sparse and its subtrees
are recursively added to the cache tree.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Disable `command_requires_full_index` repo setting and add
`ensure_full_index` guards around code paths that cannot yet use sparse
directory index entries. `reset --soft` does not modify the index, so no
compatibility changes are needed for it to function without expanding the
index. For all other reset modes (`--mixed`, `--hard`, `--keep`, `--merge`),
the full index is expanded to prevent cache tree corruption and invalid
variable accesses.
Additionally, the `read_cache()` check verifying an uncorrupted index is
moved after argument parsing and preparing the repo settings. The index is
not used by the preceding argument handling, but `read_cache()` must be run
*after* enabling sparse index for the command (so that the index is not
expanded unnecessarily) and *before* using the index for reset (so that it
is verified as uncorrupted).
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new tests for `--merge` and `--keep` modes, as well as mixed reset with
pathspecs. New performance test cases exercise various execution paths for
`reset`.
Co-authored-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of `git reset --hard` being able to use the sparse index
without expanding it, replace the command in `sparse-index is expanded and
converted back` with `git reset -- folder1/a`. This command will need to
expand the index to work properly, even after integrating the rest of
`reset` with sparse index.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change `update_index_from_diff` to set `skip-worktree` when applicable for
new index entries. When `git reset --mixed <tree-ish>` is run, entries in
the index with differences between the pre-reset HEAD and reset <tree-ish>
are identified and handled with `update_index_from_diff`. For each file, a
new cache entry in inserted into the index, created from the <tree-ish> side
of the reset (without changing the working tree). However, the newly-created
entry must have `skip-worktree` explicitly set in either of the following
scenarios:
1. the file is in the current index and has `skip-worktree` set
2. the file is not in the current index but is outside of a defined sparse
checkout definition
Not setting the `skip-worktree` bit leads to likely-undesirable results for
a user. It causes `skip-worktree` settings to disappear on the
"diff"-containing files (but *only* the diff-containing files), leading to
those files now showing modifications in `git status`. For example, when
running `git reset --mixed` in a sparse checkout, some file entries outside
of sparse checkout could show up as deleted, despite the user never deleting
anything (and not wanting them on-disk anyway).
Additionally, add a test to `t7102` to ensure `skip-worktree` is preserved
in a basic `git reset --mixed` scenario and update a failure-documenting
test from 19a0acc (t1092: test interesting sparse-checkout scenarios,
2021-01-23) with new expected behavior.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few kinds of changes "git status" can show were not documented.
* ja/doc-status-types-and-copies:
Documentation/git-status: mention how to detect copies
Documentation/git-status: document porcelain status T (typechange)
Documentation/diff-format: state in which cases porcelain status is T
Documentation/git-status: remove impossible porcelain status DR and DC
Prevent "make sparse" from running for the source files that
haven't been modified.
* ab/make-sparse-for-real:
Makefile: make the "sparse" target non-.PHONY
When "git cmd -h" shows more than one line of usage text (e.g.
the cmd subcommand may take sub-sub-command), parse-options API
learned to align these lines, even across i18n/l10n.
* ab/align-parse-options-help:
parse-options: properly align continued usage output
git rev-parse --parseopt tests: add more usagestr tests
send-pack: properly use parse_options() API for usage string
parse-options API users: align usage output in C-strings
Teach "git help -c" into helping the command line completion of
configuration variables.
* ab/help-config-vars:
help: move column config discovery to help.c library
help / completion: make "git help" do the hard work
help tests: test --config-for-completion option & output
help: simplify by moving to OPT_CMDMODE()
help: correct logic error in combining --all and --guides
help: correct logic error in combining --all and --config
help tests: add test for --config output
help: correct usage & behavior of "git help --guides"
help: correct the usage string in -h and documentation
Built-in fsmonitor (part 1).
* jh/builtin-fsmonitor-part1:
t/helper/simple-ipc: convert test-simple-ipc to use start_bg_command
run-command: create start_bg_command
simple-ipc/ipc-win32: add Windows ACL to named pipe
simple-ipc/ipc-win32: add trace2 debugging
simple-ipc: move definition of ipc_active_state outside of ifdef
simple-ipc: preparations for supporting binary messages.
trace2: add trace2_child_ready() to report on background children
Mostly preliminary clean-up in the hook API.
* ab/config-based-hooks-1:
hook-list.h: add a generated list of hooks, like config-list.h
hook.c users: use "hook_exists()" instead of "find_hook()"
hook.c: add a hook_exists() wrapper and use it in bugreport.c
hook.[ch]: move find_hook() from run-command.c to hook.c
Makefile: remove an out-of-date comment
Makefile: don't perform "mv $@+ $@" dance for $(GENERATED_H)
Makefile: stop hardcoding {command,config}-list.h
Makefile: mark "check" target as .PHONY
Updates to the tests in t0000 to test the test framework.
* ab/lib-subtest:
test-lib tests: get rid of copy/pasted mock test code
test-lib tests: assert 1 exit code, not non-zero
test-lib tests: refactor common part of check_sub_test_lib_test*()
test-lib tests: avoid subshell for "test_cmp" for readability
test-lib tests: don't provide a description for the sub-tests
test-lib tests: split up "write and run" into two functions
test-lib tests: move "run_sub_test" to a new lib-subtest.sh
Various fixes in code paths that move untracked files away to make room.
* en/removing-untracked-fixes:
Documentation: call out commands that nuke untracked files/directories
Comment important codepaths regarding nuking untracked files/dirs
unpack-trees: avoid nuking untracked dir in way of locally deleted file
unpack-trees: avoid nuking untracked dir in way of unmerged file
Change unpack_trees' 'reset' flag into an enum
Remove ignored files by default when they are in the way
unpack-trees: make dir an internal-only struct
unpack-trees: introduce preserve_ignored to unpack_trees_options
read-tree, merge-recursive: overwrite ignored files by default
checkout, read-tree: fix leak of unpack_trees_options.dir
t2500: add various tests for nuking untracked files
"git grep --recurse-submodules" takes trees and blobs from the
submodule repository, but the textconv settings when processing a
blob from the submodule is not taken from the submodule repository.
A test is added to demonstrate the issue, without fixing it.
* mt/grep-submodule-textconv:
grep: demonstrate bug with textconv attributes and submodules
"git add", "git mv", and "git rm" have been adjusted to avoid
updating paths outside of the sparse-checkout definition unless
the user specifies a "--sparse" option.
* ds/add-rm-with-sparse-index:
advice: update message to suggest '--sparse'
mv: refuse to move sparse paths
rm: skip sparse paths with missing SKIP_WORKTREE
rm: add --sparse option
add: update --renormalize to skip sparse paths
add: update --chmod to skip sparse paths
add: implement the --sparse option
add: skip tracked paths outside sparse-checkout cone
add: fail when adding an untracked sparse file
dir: fix pattern matching on dirs
dir: select directories correctly
t1092: behavior for adding sparse files
t3705: test that 'sparse_entry' is unstaged
Protocol v0 clients can get stuck parsing a malformed feature line.
* ah/connect-parse-feature-v0-fix:
connect: also update offset for features without values
"make clean" has been updated to remove leftover .depend/
directories, even when it is not told to use them to compute header
dependencies.
* ab/make-clean-depend-dirs:
Makefile: clean .depend dirs under COMPUTE_HEADER_DEPENDENCIES != yes
Sensitive data in the HTTP trace were supposed to be redacted, but
we failed to do so in HTTP/2 requests.
* jk/http-redact-fix:
http: match headers case-insensitively when redacting
"git cvsserver" had a long-standing bug in its authentication code,
which has finally been corrected (it is unclear and is a separate
question if anybody is seriously using it, though).
* cb/cvsserver:
Documentation: cleanup git-cvsserver
git-cvsserver: protect against NULL in crypt(3)
git-cvsserver: use crypt correctly to compare password hashes
"git clone" from a repository whose HEAD is unborn into a bare
repository didn't follow the branch name the other side used, which
is corrected.
* jk/clone-unborn-head-in-bare:
clone: handle unborn branch in bare repos
"git stash", where the tentative change involves changing a
directory to a file (or vice versa), was confused, which has been
corrected.
* en/stash-df-fix:
stash: restore untracked files AFTER restoring tracked files
stash: avoid feeding directories to update-index
t3903: document a pair of directory/file bugs
When "git am --abort" fails to abort correctly, it still exited
with exit status of 0, which has been corrected.
* en/am-abort-fix:
am: fix incorrect exit status on am fail to abort
t4151: add a few am --abort tests
git-am.txt: clarify --abort behavior
"git update-ref --stdin" failed to flush its output as needed,
which potentially led the conversation to a deadlock.
* ps/update-ref-batch-flush:
t1400: avoid SIGPIPE race condition on fifo
update-ref: fix streaming of status updates
The "mode" word is useless in a call to open(2) that does not
create a new file. Such a call in the files backend of the ref
subsystem has been cleaned up.
* rs/no-mode-to-open-when-appending:
refs/files-backend: remove unused open mode parameter
The order in which various files that make up a single (conceptual)
packfile has been reevaluated and straightened up. This matters in
correctness, as an incomplete set of files must not be shown to a
running Git.
* tb/pack-finalize-ordering:
pack-objects: rename .idx files into place after .bitmap files
pack-write: split up finish_tmp_packfile() function
builtin/index-pack.c: move `.idx` files into place last
index-pack: refactor renaming in final()
builtin/repack.c: move `.idx` files into place last
pack-write.c: rename `.idx` files after `*.rev`
pack-write: refactor renaming in finish_tmp_packfile()
bulk-checkin.c: store checksum directly
pack.h: line-wrap the definition of finish_tmp_packfile()
The code that optionally creates the *.rev reverse index file has
been optimized to avoid needless computation when it is not writing
the file out.
* ab/reverse-midx-optim:
pack-write: skip *.rev work when not writing *.rev
The "git apply -3" code path learned not to bother the lower level
merge machinery when the three-way merge can be trivially resolved
without the content level merge.
* jc/trivial-threeway-binary-merge:
apply: resolve trivial merge without hitting ll-merge with "--3way"
Doc update plus improved error reporting.
* jk/log-warn-on-bogus-encoding:
docs: use "character encoding" to refer to commit-object encoding
logmsg_reencode(): warn when iconv() fails
The output from "git fast-export", when its anonymization feature
is in use, showed an annotated tag incorrectly.
* tk/fast-export-anonymized-tag-fix:
fast-export: fix anonymized tag using original length
Even when running "git send-email" without its own threaded
discussion support, a threading related header in one message is
carried over to the subsequent message to result in an unwanted
threading, which has been corrected.
* mh/send-email-reset-in-reply-to:
send-email: avoid incorrect header propagation
Buggy tests could damage repositories outside the throw-away test
area we created. We now by default export GIT_CEILING_DIRECTORIES
to limit the damage from such a stray test.
* sg/set-ceiling-during-tests:
test-lib: set GIT_CEILING_DIRECTORIES to protect the surrounding repository
The sparse-index support can corrupt the index structure by storing
a stale and/or uninitialized data, which has been corrected.
* jh/sparse-index-resize-fix:
sparse-index: copy dir_hash in ensure_full_index()
"git upload-pack" which runs on the other side of "git fetch"
forgot to take the ref namespaces into account when handling
want-ref requests.
* ka/want-ref-in-namespace:
docs: clarify the interaction of transfer.hideRefs and namespaces
upload-pack.c: treat want-ref relative to namespace
t5730: introduce fetch command helper
