Commit graph

8 commits

Author SHA1 Message Date
Andrei Rybak
a5855fd8d4 t2019: don't create unused files
Tests in t2019-checkout-ambiguous-ref.sh redirect two invocations of
"git checkout" to files "stdout" and "stderr".  Several assertions are
made using file "stderr".  File "stdout", however, is unused.

Don't redirect standard output of "git checkout" to file "stdout" in
t2019-checkout-ambiguous-ref.sh to avoid creating unnecessary files.

Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-05-03 08:53:10 -07:00
Ævar Arnfjörð Bjarmason
9081a421a6 checkout: fix "branch info" memory leaks
The "checkout" command is one of the main sources of leaks in the test
suite, let's fix the common ones by not leaking from the "struct
branch_info".

Doing this is rather straightforward, albeit verbose, we need to
xstrdup() constant strings going into the struct, and free() the ones
we clobber as we go along.

This also means that we can delete previous partial leak fixes in this
area, i.e. the "path_to_free" accounting added by 96ec7b1e70 (Convert
resolve_ref+xstrdup to new resolve_refdup function, 2011-12-13).

There was some discussion about whether "we should retain the "const
char *" here and cast at free() time, or have it be a "char *". Since
this is not a public API with any sort of API boundary let's use
"char *", as is already being done for the "refname" member of the
same struct.

The tests to mark as passing were found with:

    rm .prove; GIT_SKIP_TESTS=t0027 prove -j8 --state=save t[0-9]*.sh :: --immediate
    # apply & compile this change
    prove -j8 --state=failed :: --immediate

I.e. the ones that were newly passing when the --state=failed command
was run. I left out "t3040-subprojects-basic.sh" and
"t4131-apply-fake-ancestor.sh" to to optimization-level related
differences similar to the ones noted in[1], except that these would
be something the current 'linux-leaks' job would run into.

1. https://lore.kernel.org/git/cover-v3-0.6-00000000000-20211022T175227Z-avarab@gmail.com/

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-11-18 14:32:26 -08:00
Jeff King
df714f81a7 check_filename: tighten dwim-wildcard ambiguity
When specifying both revisions and pathnames, we allow
"<rev> -- <pathspec>" to be spelled without the "--" as long
as it is not ambiguous. The original logic was something
like:

  1. Resolve each item with get_sha1(). If successful,
     we know it can be a <rev>. Verify that it _isn't_ a
     filename, using verify_non_filename(), and complain of
     ambiguity otherwise.

  2. If get_sha1() didn't succeed, make sure that it _is_
     a file, using verify_filename(). If not, complain
     that it is neither a <rev> nor a <pathspec>.

Both verify_filename() and verify_non_filename() rely on
check_filename(), which definitely said "yes, this is a
file" or "no, it is not" using lstat().

Commit 28fcc0b (pathspec: avoid the need of "--" when
wildcard is used, 2015-05-02) introduced a convenience
feature: check_filename() will consider anything with
wildcard meta-characters as a possible filename, without
even checking the filesystem.

This works well for case 2. For such a wildcard, we would
previously have died and said "it is neither". Post-28fcc0b,
we assume it's a pathspec and proceed.

But it makes some instances of case 1 worse. We may have an
extended sha1 expression that contains meta-characters
(e.g., "HEAD^{/foo.*bar}"), and we now complain that it's
also a filename, due to the wildcard characters (even though
that wildcard would not match anything in the filesystem).

One solution would be to actually expand the pathname and
see if it matches anything on the filesystem. But that's
potentially expensive, and we do not have to be so rigorous
for this DWIM magic (if you want rigor, use "--").

Instead, we can just use different rules for cases 1 and 2.
When we know something is a rev, we will complain only if it
meets a much higher standard for "this is also a file";
namely that it actually exists in the filesystem. Case 2
remains the same: we use the looser "it could be a filename"
standard introduced by 28fcc0b.

We can accomplish this by pulling the wildcard logic out of
check_filename() and putting it into verify_filename(). Its
partner verify_non_filename() does not need a change, since
check_filename() goes back to implementing the "higher
standard".

Besides these two callers of check_filename(), there is one
other: git-checkout does a similar DWIM itself. It hits this
code path only after get_sha1() has returned failure, making
it case 2, which gets the special wildcard treatment.

Note that we drop the tests in t2019 in favor of a more
complete set in t6133. t2019 was not the right place for
them (it's about refname ambiguity, not dwim parsing
ambiguity), and the second test explicitly checked for the
opposite result of the case we are fixing here (which didn't
really make any sense; as shown by the test_must_fail in the
test, it would only serve to annoy people).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-10 13:53:20 -08:00
Johannes Sixt
b3325dfc64 t2019: skip test requiring '*' in a file name non Windows
A test case introduced by ae454f61 (Add tests for wildcard "path vs ref"
disambiguation) allocates a file named '*.c'. This does not work on
Windows, because the OS forbids file names containing wildcard
characters. The test case fails where the shell attempts to allocate the
file. Skip the test on Windows.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-11 15:17:30 -07:00
Nguyễn Thái Ngọc Duy
ae454f6125 Add tests for wildcard "path vs ref" disambiguation
Commit 28fcc0b (pathspec: avoid the need of "--" when wildcard is used -
2015-05-02) changes how the disambiguation rules work. This patch adds
some tests to demonstrate, basically, if wildcard characters are in an
argument:

 - if the argument is valid extended sha-1 syntax, "--" must be used
 - otherwise the argument is considered a path, even without "--"

And wildcard can appear in extended sha-1 syntax, either as part of
regex in ":/<regex>" or as the literal path in ":<path>". The latter
case is less likely to happen in real world. But if you do ":/" a lot,
you may need to type "--" more.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-01 09:30:53 -07:00
Junio C Hamano
d3bd0425b2 i18n: use test_i18ngrep in lib-httpd and t2019
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-13 15:52:47 -07:00
Ævar Arnfjörð Bjarmason
6b3d83efac t2019-checkout-ambiguous-ref.sh: depend on C_LOCALE_OUTPUT
The t2019-checkout-ambiguous-ref.sh tests added in v1.7.4.3~12^2
examines the output for a translatable string, and must be marked
with C_LOCALE_OUTPUT; otherwise, GETTEXT_POISON=YesPlease tests
will break.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-03 11:06:07 -07:00
Junio C Hamano
6c74ce8c7d Rename t2019 with typo "amiguous" that meant "ambiguous"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-15 10:43:45 -08:00
Renamed from t/t2019-checkout-amiguous-ref.sh (Browse further)