Now that all consumers of prepare_bitmap_walk() have populated the
'filter' member of 'struct rev_info', we can drop that extra parameter
from the method and access it directly from the 'struct rev_info'.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When opening a MIDX/pack-bitmap, we call open_midx_bitmap_1() or
open_pack_bitmap_1() respectively in a loop over the set of MIDXs/packs.
By design, these functions are supposed to be called over every pack and
MIDX, since only one of them should have a valid bitmap.
Ordinarily we return '0' from these two functions in order to indicate
that we successfully loaded a bitmap To signal that we couldn't load a
bitmap corresponding to the MIDX/pack (either because one doesn't exist,
or because there was an error with loading it), we can return '-1'. In
either case, the callers each enumerate all MIDXs/packs to ensure that
at most one bitmap per-kind is present.
But when we fail to load a bitmap that does exist (for example, loading
a MIDX bitmap without finding a corresponding reverse index), we'll
return -1 but leave the 'midx' field non-NULL. So when we fallback to
loading a pack bitmap, we'll complain that the bitmap we're trying to
populate already is "opened", even though it isn't.
Rectify this by setting the '->pack' and '->midx' field back to NULL as
appropriate. Two tests are added: one to ensure that the MIDX-to-pack
bitmap fallback works, and another to ensure we still complain when
there are multiple pack bitmaps in a repository.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If prepare_bitmap_git() returns NULL (one easy-to-trigger cause being
that the repository does not have bitmaps at all), then we'll segfault
accessing bitmap_git->hashes:
$ t/helper/test-tool bitmap dump-hashes
Segmentation fault
We should treat this the same as a repository with bitmaps but no
name-hashes, and quietly produce an empty output. The later call to
free_bitmap_index() in the cleanup label is OK, as it treats a NULL
pointer as a noop.
This isn't a big deal in practice, as this function is intended for and
used only by test-tool. It's probably worth fixing to avoid confusion,
but not worth adding coverage for this to the test suite.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function free_bitmap_index() is somewhat lax in what it frees. There
are two notable examples:
- While it does call kh_destroy_oid_map on the "bitmaps" map, which
maps commit OIDs to their corresponding bitmaps, the bitmaps
themselves are not freed. Note here that we recycle already-freed
ewah_bitmaps into a pool, but these are handled correctly by
ewah_pool_free().
- We never bother to free the extended index's "positions" map, which
we always allocate in load_bitmap().
Fix both of these.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_bitmap_walk() is used to implement `git rev-list --test-bitmap`,
which compares the result of the on-disk bitmaps with ones generated
on-the-fly during a revision walk.
In fa95666a40 (pack-bitmap.c: harden 'test_bitmap_walk()' to check type
bitmaps, 2021-08-24), we hardened those tests to also check the four
special type-level bitmaps, but never freed those bitmaps. We should
have, since each required an allocation when we EWAH-decompressed them.
Free those, plugging that leak, and also free the base (the scratch-pad
bitmap), too.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To ask for the name of a MIDX and its corresponding .rev file, callers
invoke get_midx_filename() and get_midx_rev_filename(), respectively.
These both invoke xstrfmt(), allocating a chunk of memory which must be
freed later on.
This makes callers in pack-bitmap.c somewhat awkward. Specifically,
midx_bitmap_filename(), which is implemented like:
return xstrfmt("%s-%s.bitmap",
get_midx_filename(midx->object_dir),
hash_to_hex(get_midx_checksum(midx)));
this leaks the second argument to xstrfmt(), which itself was allocated
with xstrfmt(). This caller could assign both the result of
get_midx_filename() and the outer xstrfmt() to a temporary variable,
remembering to free() the former before returning. But that involves a
wasteful copy.
Instead, get_midx_filename() and get_midx_rev_filename() take a strbuf
as an output parameter. This way midx_bitmap_filename() can manipulate
and pass around a temporary buffer which it detaches back to its caller.
That allows us to implement the function without copying or open-coding
get_midx_filename() in a way that doesn't leak.
Update the other callers of get_midx_filename() and
get_midx_rev_filename() accordingly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git repack" has been taught to generate multi-pack reachability
bitmaps.
* tb/repack-write-midx:
test-read-midx: fix leak of bitmap_index struct
builtin/repack.c: pass `--refs-snapshot` when writing bitmaps
builtin/repack.c: make largest pack preferred
builtin/repack.c: support writing a MIDX while repacking
builtin/repack.c: extract showing progress to a variable
builtin/repack.c: rename variables that deal with non-kept packs
builtin/repack.c: keep track of existing packs unconditionally
midx: preliminary support for `--refs-snapshot`
builtin/multi-pack-index.c: support `--stdin-packs` mode
midx: expose `write_midx_file_only()` publicly
When repacking into a geometric series and writing a multi-pack bitmap,
it is beneficial to have the largest resulting pack be the preferred
object source in the bitmap's MIDX, since selecting the large packs can
lead to fewer broken delta chains and better compression.
Teach 'git repack' to identify this pack and pass it to the MIDX write
machinery in order to mark it as preferred.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an old bitmap exists while writing a new one, we load it and build
a "reposition" table which maps bit positions of objects from the old
bitmap to their respective positions in the new bitmap. This can help
when we encounter a commit which was selected in both the old and new
bitmap, since we only need to permute its bit (not recompute it from
scratch).
We do not, however, repurpose existing namehash values in the case of
the hash-cache extension. There has been thus far no good reason to do
so, since all of the namehash values for objects in the new bitmap would
be populated during the traversal that was just performed by
pack-objects when generating single-pack reachability bitmaps.
But this isn't the case for multi-pack bitmaps, which are written via
`git multi-pack-index write --bitmap` and do not perform any traversal.
In this case all namehash values are set to zero, but we don't even
bother to check the `pack.writeBitmapHashcache` option anyway, so it
fails to matter.
There are two approaches we could take to fill in non-zero hash-cache
values:
- have either the multi-pack-index builtin run its own
traversal to attempt to fill in some values, or let a hypothetical
caller (like `pack-objects` when `repack` eventually drives the
`multi-pack-index` builtin) fill in the values they found during
their traversal
- or copy any existing namehash values that were stored in an
existing bitmap to their corresponding positions in the new bitmap
In a system where a repository is generally repacked with `git repack
--geometric=<d>` and occasionally repacked with `git repack -a`, the
hash-cache coverage will tend towards all objects.
Since populating the hash-cache is additive (i.e., doing so only helps
our delta search), any intermediate lack of full coverage is just fine.
So let's start by just propagating any values from the existing
hash-cache if we see one.
The next patch will respect the `pack.writeBitmapHashcache` option while
writing MIDX bitmaps, and then test this new behavior.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pack-bitmap writer code is about to learn how to propagate values
from an existing hash-cache. To prepare, teach the test-bitmap helper to
dump the values from a bitmap's hash-cache extension in order to test
those changes.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting in commit 0f533c7284 (pack-bitmap: read multi-pack bitmaps,
2021-08-31), we no longer look at the "struct bitmap_index" passed to
try_partial_reuse(). This is because we only handle verbatim reuse from
a single pack: either the pack whose bitmap we're looking at, or the
"preferred" pack of a midx bitmap. And thus the primary item we look at
is the "pack" parameter added by that same commit, and not the
bitmap_git->pack parameter (which would be NULL for a midx bitmap). It's
our caller, reuse_partial_packfile_from_bitmap(), which decides which
pack to use and passes it in to us.
Drop the unused parameter to prevent confusion.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We never look at the repository argument which is passed. This makes
sense, since the multi_pack_index struct already tells us everything we
need to access the files in its associated object directory.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prepares the code in pack-bitmap to interpret the new multi-pack
bitmaps described in Documentation/technical/bitmap-format.txt, which
mostly involves converting bit positions to accommodate looking them up
in a MIDX.
Note that there are currently no writers who write multi-pack bitmaps,
and that this will be implemented in the subsequent commit. Note also
that get_midx_checksum() and get_midx_filename() are made non-static so
they can be called from pack-bitmap.c.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
try_partial_reuse() is used to mark any bits in the beginning of a
bitmap whose objects can be reused verbatim from the pack they came
from.
Currently this function returns void, and signals nothing to the caller
when bits could not be reused. But multi-pack bitmaps would benefit from
having such a signal, because they may try to pass objects which are in
bounds, but from a pack other than the preferred one.
Any extra calls are noops because of a conditional in
reuse_partial_packfile_from_bitmap(), but those loop iterations can be
avoided by letting try_partial_reuse() indicate when it can't accept any
more bits for reuse, and then listening to that signal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a recent commit, pack-objects learned support for the
'pack.preferBitmapTips' configuration. This patch prepares the
multi-pack bitmap code to respect this configuration, too.
The yet-to-be implemented code will find that it is more efficient to
check whether each reference contains a prefix found in the configured
set of values rather than doing an additional traversal.
Implement a function 'bitmap_is_preferred_refname()' which will perform
that check. Its caller will be added in a subsequent patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent patch to support reading MIDX bitmaps will be less noisy
after extracting a generic function to fetch the nth OID contained in
the bitmap.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent patch to support reading MIDX bitmaps will be less noisy
after extracting a generic function to return how many objects are
contained in a bitmap.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The special `--test-bitmap` mode of `git rev-list` is used to compare
the result of an object traversal with a bitmap to check its integrity.
This mode does not, however, assert that the types of reachable objects
are stored correctly.
Harden this mode by teaching it to also check that each time an object's
bit is marked, the corresponding bit should be set in exactly one of the
type bitmaps (whose type matches the object's true type).
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A race between repacking and using pack bitmaps has been corrected.
* jk/check-pack-valid-before-opening-bitmap:
pack-bitmap: check pack validity when opening bitmap
When pack-objects adds an entry to its list of objects to pack, it may
mark the packfile and offset that contains the file, which we can later
use to output the object verbatim. If the packfile is deleted while we
are running (e.g., by another process running "git repack"), we may die
in use_pack() if the pack file cannot be opened.
We worked around this in 4c08018204 (pack-objects: protect against
disappearing packs, 2011-10-14) by making sure we can open the pack
before recording it as a source. This detects a pack which has already
disappeared while generating the packing list, and because we keep the
pack's file descriptor (or an mmap window) open, it means we can access
it later (unless you exceed core.packedgitlimit).
The bitmap code that was added later does not do this; it adds entries
to the packlist without checking that the packfile is still valid, and
is vulnerable to this race. It needs the same treatment as 4c08018204.
However, rather than add it in just that one spot, it makes more sense
to simply open and check the packfile when we open the bitmap.
Technically you can use the .bitmap without even looking in the .pack
file (e.g., if you are just printing a list of objects without accessing
them), but it's much simpler to do it early. That covers all later
direct uses of the pack (due to the cached descriptor) without having to
check each one directly. For example, in pack-objects we need to protect
the packlist entries, but we also access the pack directly as part of
the reuse_partial_pack_from_bitmap() feature. This patch covers both
cases.
There's no test here, because the problem is inherently racy. I
reproduced and verified the fix with this script:
rm -rf parent.git push.git fetch.git
push() {
(
cd push.git &&
echo content >>file &&
git add file &&
git commit -qm "change $1" &&
git push -q origin HEAD &&
echo "push $1..."
) &&
(
cd parent.git &&
git repack -ad -q &&
echo "repack $1..."
)
}
fetch() {
rm -rf fetch.git &&
git clone -q file://$PWD/parent.git fetch.git &&
echo "fetch $1..."
}
git init --bare parent.git &&
git --git-dir=parent.git config transfer.unpacklimit 1 &&
git clone parent.git push.git &&
(for i in `seq 1 1000`; do push $i || break; done) &
pusher=$!
(for i in `seq 1 1000`; do fetch $i || break; done) &
fetcher=$!
wait $fetcher
kill $pusher
That simulates a race between a client cloning and a push triggering a
repack on the server. Without this patch, it generally fails within a
couple hundred iterations with:
remote: fatal: packfile ./objects/pack/.tmp-1377349-pack-498afdec371232bdb99d1757872f5569331da61e.pack cannot be accessed
error: git upload-pack: git-pack-objects died with error.
fatal: git upload-pack: aborting due to possible repository corruption on the remote side.
remote: aborting due to possible repository corruption on the remote side.
fatal: early EOF
fatal: fetch-pack: invalid index-pack output
With this patch, it reliably runs through all thousand attempts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that eventually became filter_bitmap_exclude_type() was
originally introduced in 4f3bd5606a (pack-bitmap: implement BLOB_NONE
filtering, 2020-02-14) to accelerate BLOB_NONE filters with bitmaps.
In 856e12c18a (pack-bitmap.c: make object filtering functions generic,
2020-05-04), it became filter_bitmap_exclude_type(). But not all of the
comments were updated to be agnostic to the provided type.
Remove the remaining comments which should have been updated in
856e12c18a to reflect the type-agnostic nature of the function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an object is already mentioned in a reachability bitmap we are
building, then by definition so are all of the objects it can reach. We
have an optimization to stop traversing commits when we see they are
already in the bitmap, but we don't do the same for trees.
It's generally unavoidable to recurse into trees for commits not yet
covered by bitmaps (since most commits generally do have unique
top-level trees). But they usually have subtrees that are shared with
other commits (i.e., all of the subtrees the commit _didn't_ touch). And
some of those commits (and their trees) may be covered by the bitmap.
Usually this isn't _too_ big a deal, because we'll visit those subtrees
only once in total for the whole walk. But if you have a large number of
unbitmapped commits, and if your tree is big, then you may end up
opening a lot of sub-trees for no good reason.
We can use the same optimization we do for commits here: when we are
about to open a tree, see if it's in the bitmap (either the one we are
building, or the "seen" bitmap which covers the UNINTERESTING side of
the bitmap when doing a set-difference).
This works especially well because we'll visit all commits before
hitting any trees. So even in a history like:
A -- B
if "A" has a bitmap on disk but "B" doesn't, we'll already have OR-ed in
the results from A before looking at B's tree (so we really will only
look at trees touched by B).
For most repositories, the timings produced by p5310 are unspectacular.
Here's linux.git:
Test HEAD^ HEAD
--------------------------------------------------------------------
5310.4: simulated clone 6.00(5.90+0.10) 5.98(5.90+0.08) -0.3%
5310.5: simulated fetch 2.98(5.45+0.18) 2.85(5.31+0.18) -4.4%
5310.7: rev-list (commits) 0.32(0.29+0.03) 0.33(0.30+0.03) +3.1%
5310.8: rev-list (objects) 1.48(1.44+0.03) 1.49(1.44+0.05) +0.7%
Any improvement there is within the noise (the +3.1% on test 7 has to be
noise, since we are not recursing into trees, and thus the new code
isn't even run). The results for git.git are likewise uninteresting.
But here are numbers from some other real-world repositories (that are
not public). This one's tree is comparable in size to linux.git, but has
~16k refs (and so less complete bitmap coverage):
Test HEAD^ HEAD
-------------------------------------------------------------------------
5310.4: simulated clone 38.34(39.86+0.74) 33.95(35.53+0.76) -11.5%
5310.5: simulated fetch 2.29(6.31+0.35) 2.20(5.97+0.41) -3.9%
5310.7: rev-list (commits) 0.99(0.86+0.13) 0.96(0.85+0.11) -3.0%
5310.8: rev-list (objects) 11.32(11.04+0.27) 6.59(6.37+0.21) -41.8%
And here's another with a very large tree (~340k entries), and a fairly
large number of refs (~10k):
Test HEAD^ HEAD
-------------------------------------------------------------------------
5310.3: simulated clone 53.83(54.71+1.54) 39.77(40.76+1.50) -26.1%
5310.4: simulated fetch 19.91(20.11+0.56) 19.79(19.98+0.67) -0.6%
5310.6: rev-list (commits) 0.54(0.44+0.11) 0.51(0.43+0.07) -5.6%
5310.7: rev-list (objects) 24.32(23.59+0.73) 9.85(9.49+0.36) -59.5%
This patch provides substantial improvements in these larger cases, and
have any drawbacks for smaller ones (the cost of the bitmap check is
quite small compared to an actual tree traversal).
Note that we have to add a version of revision.c's include_check
callback which handles non-commits. We could possibly consolidate this
into a single callback for all objects types, as there's only one user
of the feature which would need converted (pack-bitmap.c:should_include).
That would in theory let us avoid duplicating any logic. But when I
tried it, the code ended up much worse to read, with lots of repeated
"if it's a commit do this, otherwise do that". Having two separate
callbacks splits that naturally, and matches the existing split of
show_commit/show_object callbacks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list" learns the "--filter=object:type=<type>" option,
which can be used to exclude objects of the given kind from the
packfile generated by pack-objects.
* ps/rev-list-object-type-filter:
rev-list: allow filtering of provided items
pack-bitmap: implement combined filter
pack-bitmap: implement object type filter
list-objects: implement object type filter
list-objects: support filtering by tag and commit
list-objects: move tag processing into its own function
revision: mark commit parents as NOT_USER_GIVEN
uploadpack.txt: document implication of `uploadpackfilter.allow`
When the reachability bitmap is in effect, the "do not lose
recently created objects and those that are reachable from them"
safety to protect us from races were disabled by mistake, which has
been corrected.
* jk/prune-with-bitmap-fix:
prune: save reachable-from-recent objects with bitmaps
pack-bitmap: clean up include_check after use
When a bitmap walk has to traverse (to fill in non-bitmapped objects),
we use rev_info's include_check mechanism to let us stop the traversal
early. But after setting the function and its data parameter, we never
clean it up. This means that if the rev_info is used for a subsequent
traversal without bitmaps, it will unexpectedly call into our
include_check function (worse, it will do so pointing to a now-defunct
stack variable in include_check_data, likely resulting in a segfault).
There's no code which does this now, but it's an accident waiting to
happen. Let's clean up after ourselves in the bitmap code.
Reported-by: David Emett <dave@sp4m.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When providing an object filter, it is currently impossible to also
filter provided items. E.g. when executing `git rev-list HEAD` , the
commit this reference points to will be treated as user-provided and is
thus excluded from the filtering mechanism. This makes it harder than
necessary to properly use the new `--filter=object:type` filter given
that even if the user wants to only see blobs, he'll still see commits
of provided references.
Improve this by introducing a new `--filter-provided-objects` option
to the git-rev-parse(1) command. If given, then all user-provided
references will be subject to filtering.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user has multiple objects filters specified, then this is
internally represented by having a "combined" filter. These combined
filters aren't yet supported by bitmap indices and can thus not be
accelerated.
Fix this by implementing support for these combined filters. The
implementation is quite trivial: when there's a combined filter, we
simply recurse into `filter_bitmap()` for all of the sub-filters.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The preceding commit has added a new object filter for git-rev-list(1)
which allows to filter objects by type. Implement the equivalent filter
for packfile bitmaps so that we can answer these queries fast.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A configuration variable has been added to force tips of certain
refs to be given a reachability bitmap.
* tb/pack-preferred-tips-to-give-bitmap:
builtin/pack-objects.c: respect 'pack.preferBitmapTips'
t/helper/test-bitmap.c: initial commit
pack-bitmap: add 'test_bitmap_commits()' helper
Optimize "rev-list --use-bitmap-index --objects" corner case that
uses negative tags as the stopping points.
* ps/pack-bitmap-optim:
pack-bitmap: avoid traversal of objects referenced by uninteresting tag
When writing a new pack with a bitmap, it is sometimes convenient to
indicate some reference prefixes which should receive priority when
selecting which commits to receive bitmaps.
A truly motivated caller could accomplish this by setting
'pack.islandCore', (since all commits in the core island are similarly
marked as preferred) but this requires callers to opt into using delta
islands, which they may or may not want to do.
Introduce a new multi-valued configuration, 'pack.preferBitmapTips' to
allow callers to specify a list of reference prefixes. All references
which have a prefix contained in 'pack.preferBitmapTips' will mark their
tips as "preferred" in the same way as commits are marked as preferred
for selection by 'pack.islandCore'.
The choice of the verb "prefer" is intentional: marking the NEEDS_BITMAP
flag on an object does *not* guarantee that that object will receive a
bitmap. It merely guarantees that that commit will receive a bitmap over
any *other* commit in the same window by bitmap_writer_select_commits().
The test this patch adds reflects this quirk, too. It only tests that
a commit (which didn't receive bitmaps by default) is selected for
bitmaps after changing the value of 'pack.preferBitmapTips' to include
it. Other commits may lose their bitmaps as a byproduct of how the
selection process works (bitmap_writer_select_commits() ignores the
remainder of a window after seeing a commit with the NEEDS_BITMAP flag).
This configuration will aide in selecting important references for
multi-pack bitmaps, since they do not respect the same pack.islandCore
configuration. (They could, but doing so may be confusing, since it is
packs--not bitmaps--which are influenced by the delta-islands
configuration).
In a fork network repository (one which lists all forks of a given
repository as remotes), for example, it is useful to set
pack.preferBitmapTips to 'refs/remotes/<root>/heads' and
'refs/remotes/<root>/tags', where '<root>' is an opaque identifier
referring to the repository which is at the base of the fork chain.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next patch will add a 'bitmap' test-tool which prints the list of
commits that have bitmaps computed.
The test helper could implement this itself, but it would need access to
the 'bitmaps' field of the 'pack_bitmap' struct. To avoid exposing this
private detail, implement the entirety of the helper behind a
test_bitmap_commits() function in pack-bitmap.c.
There is some precedence for this with test_bitmap_walk() which is used
to implement the '--test-bitmap' flag in 'git rev-list' (and is also
implemented in pack-bitmap.c).
A caller will be added in the next patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When preparing the bitmap walk, we first establish the set of of have
and want objects by iterating over the set of pending objects: if an
object is marked as uninteresting, it's declared as an object we already
have, otherwise as an object we want. These two sets are then used to
compute which transitively referenced objects we need to obtain.
One special case here are tag objects: when a tag is requested, we
resolve it to its first not-tag object and add both resolved objects as
well as the tag itself into either the have or want set. Given that the
uninteresting-property always propagates to referenced objects, it is
clear that if the tag is uninteresting, so are its children and vice
versa. But we fail to propagate the flag, which effectively means that
referenced objects will always be interesting except for the case where
they have already been marked as uninteresting explicitly.
This mislabeling does not impact correctness: we now have it in our
"wants" set, and given that we later do an `AND NOT` of the bitmaps of
"wants" and "haves" sets it is clear that the result must be the same.
But we now start to needlessly traverse the tag's referenced objects in
case it is uninteresting, even though we know that each referenced
object will be uninteresting anyway. In the worst case, this can lead to
a complete graph walk just to establish that we do not care for any
object.
Fix the issue by propagating the `UNINTERESTING` flag to pointees of tag
objects and add a benchmark with negative revisions to p5310. This shows
some nice performance benefits, tested with linux.git:
Test HEAD~ HEAD
---------------------------------------------------------------------------------------------------------------
5310.3: repack to disk 193.18(181.46+16.42) 194.61(183.41+15.83) +0.7%
5310.4: simulated clone 25.93(24.88+1.05) 25.81(24.73+1.08) -0.5%
5310.5: simulated fetch 2.64(5.30+0.69) 2.59(5.16+0.65) -1.9%
5310.6: pack to file (bitmap) 58.75(57.56+6.30) 58.29(57.61+5.73) -0.8%
5310.7: rev-list (commits) 1.45(1.18+0.26) 1.46(1.22+0.24) +0.7%
5310.8: rev-list (objects) 15.35(14.22+1.13) 15.30(14.23+1.07) -0.3%
5310.9: rev-list with tag negated via --not --all (objects) 22.49(20.93+1.56) 0.11(0.09+0.01) -99.5%
5310.10: rev-list with negative tag (objects) 0.61(0.44+0.16) 0.51(0.35+0.16) -16.4%
5310.11: rev-list count with blob:none 12.15(11.19+0.96) 12.18(11.19+0.99) +0.2%
5310.12: rev-list count with blob:limit=1k 17.77(15.71+2.06) 17.75(15.63+2.12) -0.1%
5310.13: rev-list count with tree:0 1.69(1.31+0.38) 1.68(1.28+0.39) -0.6%
5310.14: simulated partial clone 20.14(19.15+0.98) 19.98(18.93+1.05) -0.8%
5310.16: clone (partial bitmap) 12.78(13.89+1.07) 12.72(13.99+1.01) -0.5%
5310.17: pack to file (partial bitmap) 42.07(45.44+2.72) 41.44(44.66+2.80) -1.5%
5310.18: rev-list with tree filter (partial bitmap) 0.44(0.29+0.15) 0.46(0.32+0.14) +4.5%
While most benchmarks are probably in the range of noise, the newly
added 5310.9 and 5310.10 benchmarks consistenly perform better.
Signed-off-by: Patrick Steinhardt <ps@pks.im>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can sometimes be useful to see which refs are contributing to the
overall repository size (e.g., does some branch have a bunch of objects
not found elsewhere in history, which indicates that deleting it would
shrink the size of a clone).
You can find that out by generating a list of objects, getting their
sizes from cat-file, and then summing them, like:
git rev-list --objects --no-object-names main..branch
git cat-file --batch-check='%(objectsize:disk)' |
perl -lne '$total += $_; END { print $total }'
Though note that the caveats from git-cat-file(1) apply here. We "blame"
base objects more than their deltas, even though the relationship could
easily be flipped. Still, it can be a useful rough measure.
But one problem is that it's slow to run. Teaching rev-list to sum up
the sizes can be much faster for two reasons:
1. It skips all of the piping of object names and sizes.
2. If bitmaps are in use, for objects that are in the
bitmapped packfile we can skip the oid_object_info()
lookup entirely, and just ask the revindex for the
on-disk size.
This patch implements a --disk-usage option which produces the same
answer in a fraction of the time. Here are some timings using a clone of
torvalds/linux:
[rev-list piped to cat-file, no bitmaps]
$ time git rev-list --objects --no-object-names --all |
git cat-file --buffer --batch-check='%(objectsize:disk)' |
perl -lne '$total += $_; END { print $total }'
1459938510
real 0m29.635s
user 0m38.003s
sys 0m1.093s
[internal, no bitmaps]
$ time git rev-list --disk-usage --objects --all
1459938510
real 0m31.262s
user 0m30.885s
sys 0m0.376s
Even though the wall-clock time is slightly worse due to parallelism,
notice the CPU savings between the two. We saved 21% of the CPU just by
avoiding the pipes.
But the real win is with bitmaps. If we use them without the new option:
[rev-list piped to cat-file, bitmaps]
$ time git rev-list --objects --no-object-names --all --use-bitmap-index |
git cat-file --batch-check='%(objectsize:disk)' |
perl -lne '$total += $_; END { print $total }'
1459938510
real 0m6.244s
user 0m8.452s
sys 0m0.311s
then we're faster to generate the list of objects, but we still spend a
lot of time piping and looking things up. But if we do both together:
[internal, bitmaps]
$ time git rev-list --disk-usage --objects --all --use-bitmap-index
1459938510
real 0m0.219s
user 0m0.169s
sys 0m0.049s
then we get the same answer much faster.
For "--all", that answer will correspond closely to "du objects/pack",
of course. But we're actually checking reachability here, so we're still
fast when we ask for more interesting things:
$ time git rev-list --disk-usage --use-bitmap-index v5.0..v5.10
374798628
real 0m0.429s
user 0m0.356s
sys 0m0.072s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove another instance of looking at the revindex directly by instead
calling 'pack_pos_to_index()'. Unlike other patches, this caller only
cares about the index position of each object in the loop.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove another instance of direct revindex manipulation by calling
'pack_pos_to_offset()' instead (the caller here does not care about the
index position of the object at position 'pos').
Note that we cannot just use the existing "offset" variable to store the
value we get from pack_pos_to_offset(). It is incremented by
unpack_object_header(), but we later need the original value. Since
we'll no longer have revindex->offset to read it from, we'll store that
in a separate variable ("header" since it points to the entry's header
bytes).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove another caller that holds onto a 'struct revindex_entry' by
replacing the direct indexing with calls to 'pack_pos_to_offset()' and
'pack_pos_to_index()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid storing the revindex entry directly, since this structure will
soon be removed from the public interface. Instead, store the offset and
index position by calling 'pack_pos_to_offset()' and
'pack_pos_to_index()', respectively.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace find_revindex_position() with its counterpart in the new API,
offset_to_pack_pos().
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'find_objects()' currently needs to interact with the bitmaps khash
pretty closely. To make 'find_objects()' read a little more
straightforwardly, remove some of the khash-level details into a new
function that describes what it does: 'add_commit_to_bitmap()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of callers within pack-bitmap.c duplicate logic to lookup a
given object id in the bitamps khash. Factor this out into a new
function, 'bitmap_for_commit()' to reduce some code duplication.
Make this new function non-static, since it will be used in later
commits from outside of pack-bitmap.c.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The on-disk bitmap format has a flag to mark a bitmap to be "reused".
This is a rather curious feature, and works like this:
- a run of pack-objects would decide to mark the last 80% of the
bitmaps it generates with the reuse flag
- the next time we generate bitmaps, we'd see those reuse flags from
the last run, and mark those commits as special:
- we'd be more likely to select those commits to get bitmaps in
the new output
- when generating the bitmap for a selected commit, we'd reuse the
old bitmap as-is (rearranging the bits to match the new pack, of
course)
However, neither of these behaviors particularly makes sense.
Just because a commit happened to be bitmapped last time does not make
it a good candidate for having a bitmap this time. In particular, we may
choose bitmaps based on how recent they are in history, or whether a ref
tip points to them, and those things will change. We're better off
re-considering fresh which commits are good candidates.
Reusing the existing bitmap _is_ a reasonable thing to do to save
computation. But only reusing exact bitmaps is a weak form of this. If
we have an old bitmap for A and now want a new bitmap for its child, we
should be able to compute that only by looking at trees and that are new
to the child. But this code would consider only exact reuse (which is
perhaps why it was eager to select those commits in the first place).
Furthermore, the recent switch to the reverse-edge algorithm for
generating bitmaps dropped this optimization entirely (and yet still
performs better).
So let's do a few cleanups:
- drop the whole "reusing bitmaps" phase of generating bitmaps. It's
not helping anything, and is mostly unused code (or worse, code that
is using CPU but not doing anything useful)
- drop the use of the on-disk reuse flag to select commits to bitmap
- stop setting the on-disk reuse flag in bitmaps we generate (since
nothing respects it anymore)
We will keep a few innards of the reuse code, which will help us
implement a more capable version of the "reuse" optimization:
- simplify rebuild_existing_bitmaps() into a function that only builds
the mapping of bits between the old and new orders, but doesn't
actually convert any bitmaps
- make rebuild_bitmap() public; we'll call it lazily to convert bitmaps
as we traverse (using the mapping created above)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before 'load_bitmap_entries_v1()' reads an actual EWAH bitmap, it should
check that it can safely do so by ensuring that there are at least 6
bytes available to be read (four for the commit's index position, and
then two more for the xor offset and flags, respectively).
Likewise, it should check that the commit index it read refers to a
legitimate object in the pack.
The first fix catches a truncation bug that was exposed when testing,
and the second is purely precautionary.
There are some possible future improvements, not pursued here. They are:
- Computing the correct boundary of the bitmap itself in the caller
and ensuring that we don't read past it. This may or may not be
worth it, since in a truncation situation, all bets are off: (is the
trailer still there and the bitmap entries malformed, or is the
trailer truncated?). The best we can do is try to read what's there
as if it's correct data (and protect ourselves when it's obviously
bogus).
- Avoid the magic "6" by teaching read_be32() and read_u8() (both of
which are custom helpers for this function) to check sizes before
advancing the pointers.
- Adding more tests in this area. Testing these truncation situations
are remarkably fragile to even subtle changes in the bitmap
generation. So, the resulting tests are likely to be quite brittle.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can use "git rev-list --test-bitmap HEAD" to check that bitmaps
produce the same answer we'd get from a regular traversal. But if we
detect an error, we only print "mismatch", and still exit with a
successful error code.
That makes the uses of --test-bitmap in the test suite (e.g., in t5310)
mostly pointless: even if we saw an error, the tests wouldn't notice.
Let's instead call die(), which will let these tests work as designed,
and alert us if the bitmaps are bogus.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A .bitmap file may have a "name hash cache" extension, which puts a
sequence of uint32_t values (one per object) at the end of the file.
When we see a flag indicating this extension, we blindly subtract the
appropriate number of bytes from our available length. However, if the
.bitmap file is too short, we'll underflow our length variable and wrap
around, thinking we have a very large length. This can lead to reading
out-of-bounds bytes while loading individual ewah bitmaps.
We can fix this by checking the number of available bytes when we parse
the header. The existing "truncated bitmap" test is now split into two
tests: one where we don't have this extension at all (and hence actually
do try to read a truncated ewah bitmap) and one where we realize
up-front that we can't even fit in the cache structure. We'll check
stderr in each case to make sure we hit the error we're expecting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we parse a .bitmap header, we first check that we have enough bytes
to make a valid header. We do that based on sizeof(struct
bitmap_disk_header). However, as of 0f4d6cada8 (pack-bitmap: make bitmap
header handling hash agnostic, 2019-02-19), that struct oversizes its
checksum member to GIT_MAX_RAWSZ. That means we need to adjust for the
difference between that constant and the size of the actual hash we're
using. That commit adjusted the code which moves our pointer forward,
but forgot to update the size check.
This meant we were overly strict about the header size (requiring room
for a 32-byte worst-case hash, when sha1 is only 20 bytes). But in
practice it didn't matter because bitmap files tend to have at least 12
bytes of actual data anyway, so it was unlikely for a valid file to be
caught by this.
Let's fix it by pulling the header size into a separate variable and
using it in both spots. That fixes the bug and simplifies the code to make
it harder to have a mismatch like this in the future. It will also come
in handy in the next patch for more bounds checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes a bitmap traversal still has to walk some commits manually,
because those commits aren't included in the bitmap packfile (e.g., due
to a push or commit since the last full repack). If we're given an
object filter, we don't pass it down to this traversal. It's not
necessary for correctness because the bitmap code has its own filters to
post-process the bitmap result (which it must, to filter out the objects
that _are_ mentioned in the bitmapped packfile).
And with blob filters, there was no performance reason to pass along
those filters, either. The fill-in traversal could omit them from the
result, but it wouldn't save us any time to do so, since we'd still have
to walk each tree entry to see if it's a blob or not.
But now that we support tree filters, there's opportunity for savings. A
tree:depth=0 filter means we can avoid accessing trees entirely, since
we know we won't them (or any of the subtrees or blobs they point to).
The new test in p5310 shows this off (the "partial bitmap" state is one
where HEAD~100 and its ancestors are all in a bitmapped pack, but
HEAD~100..HEAD are not). Here are the results (run against linux.git):
Test HEAD^ HEAD
-------------------------------------------------------------------------------------------------
[...]
5310.16: rev-list with tree filter (partial bitmap) 0.19(0.17+0.02) 0.03(0.02+0.01) -84.2%
The absolute number of savings isn't _huge_, but keep in mind that we
only omitted 100 first-parent links (in the version of linux.git here,
that's 894 actual commits). In a more pathological case, we might have a
much larger proportion of non-bitmapped commits. I didn't bother
creating such a case in the perf script because the setup is expensive,
and this is plenty to show the savings as a percentage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous patch, we made it easy to define other filters that
exclude all objects of a certain type. Use that in order to implement
bitmap-level filtering for the '--filter=tree:<n>' filter when 'n' is
equal to 0.
The general case is not helped by bitmaps, since for values of 'n > 0',
the object filtering machinery requires a full-blown tree traversal in
order to determine the depth of a given tree. Caching this is
non-obvious, too, since the same tree object can have a different depth
depending on the context (e.g., a tree was moved up in the directory
hierarchy between two commits).
But, the 'n = 0' case can be helped, and this patch does so. Running
p5310.11 in this tree and on master with the kernel, we can see that
this case is helped substantially:
Test master this tree
--------------------------------------------------------------------------------
5310.11: rev-list count with tree:0 10.68(10.39+0.27) 0.06(0.04+0.01) -99.4%
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 4f3bd5606a (pack-bitmap: implement BLOB_NONE filtering, 2020-02-14),
filtering support for bitmaps was added for the 'LOFC_BLOB_NONE' filter.
In the future, we would like to add support for filters that behave as
if they exclude a certain type of object, for e.g., the tree depth
filter with depth 0.
To prepare for this, make some of the functions used for filtering more
generic, such as 'find_tip_blobs' and 'filter_bitmap_blob_none' so that
they can work over arbitrary object types.
To that end, create 'find_tip_objects' and
'filter_bitmap_exclude_type', and redefine the aforementioned functions
in terms of those.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup to use "struct object_id" more by replacing use of
"char *sha1"
* jk/nth-packed-object-id:
packfile: drop nth_packed_object_sha1()
packed_object_info(): use object_id internally for delta base
packed_object_info(): use object_id for returning delta base
pack-check: push oid lookup into loop
pack-check: convert "internal error" die to a BUG()
pack-bitmap: use object_id when loading on-disk bitmaps
pack-objects: use object_id struct in pack-reuse code
pack-objects: convert oe_set_delta_ext() to use object_id
pack-objects: read delta base oid into object_id struct
nth_packed_object_oid(): use customary integer return
The object reachability bitmap machinery and the partial cloning
machinery were not prepared to work well together, because some
object-filtering criteria that partial clones use inherently rely
on object traversal, but the bitmap machinery is an optimization
to bypass that object traversal. There however are some cases
where they can work together, and they were taught about them.
* jk/object-filter-with-bitmap:
rev-list --count: comment on the use of count_right++
pack-objects: support filters with bitmaps
pack-bitmap: implement BLOB_LIMIT filtering
pack-bitmap: implement BLOB_NONE filtering
bitmap: add bitmap_unset() function
rev-list: use bitmap filters for traversal
pack-bitmap: basic noop bitmap filter infrastructure
rev-list: allow commit-only bitmap traversals
t5310: factor out bitmap traversal comparison
rev-list: allow bitmaps when counting objects
rev-list: make --count work with --objects
rev-list: factor out bitmap-optimized routines
pack-bitmap: refuse to do a bitmap traversal with pathspecs
rev-list: fallback to non-bitmap traversal when filtering
pack-bitmap: fix leak of haves/wants object lists
pack-bitmap: factor out type iterator initialization
A pack bitmap file contains the index position of the commit for each
bitmap, which we then translate into an object id via
nth_packed_object_sha1(). In preparation for that function going away,
we can switch to the more type-safe nth_packed_object_id().
Note that even though the result ends up in an object_id this does incur
an extra copy of the hash (into our temporary object_id, and then into
the final malloc'd stored_bitmap struct). This shouldn't make any
measurable difference. If it did, we could avoid this copy _and_ the
copy of the rest of the items by allocating the stored_bitmap struct
beforehand and reading directly into it from the bitmap file. Or better
still, if this is a bottleneck, we could introduce an on-disk index to
the bitmap file so we don't have to read every single entry to use just
one of them. So it's not worth worrying about micro-optimizing out this
one hash copy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our nth_packed_object_sha1() function returns NULL for error. So when we
wrapped it with nth_packed_object_oid(), we kept the same semantics. But
it's a bit funny, because the caller actually passes in an out
parameter, and the pointer we return is just that same struct they
passed to us (or NULL).
It's not too terrible, but it does make the interface a little
non-idiomatic. Let's switch to our usual "0 for success, negative for
error" return value. Most callers either don't check it, or are
trivially converted. The one that requires the biggest change is
actually improved, as we can ditch an extra aliased pointer variable.
Since we are changing the interface in a subtle way that the compiler
wouldn't catch, let's also change the name to catch any topics in
flight. We can drop the 'o' and make it nth_packed_object_id(). That's
slightly shorter, but also less redundant since the 'o' stands for
"object" already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just as the previous commit implemented BLOB_NONE, we can support
BLOB_LIMIT filters by looking at the sizes of any blobs in the result
and unsetting their bits as appropriate. This is slightly more expensive
than BLOB_NONE, but still produces a noticeable speedup (these results
are on git.git):
Test HEAD~2 HEAD
------------------------------------------------------------------------------------
5310.9: rev-list count with blob:none 1.80(1.77+0.02) 0.22(0.20+0.02) -87.8%
5310.10: rev-list count with blob:limit=1k 1.99(1.96+0.03) 0.29(0.25+0.03) -85.4%
The implementation is similar to the BLOB_NONE one, with the exception
that we have to go object-by-object while walking the blob-type bitmap
(since we can't mask out the matches, but must look up the size
individually for each blob). The trick with using ctz64() is taken from
show_objects_for_type(), which likewise needs to find individual bits
(but wants to quickly skip over big chunks without blobs).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can easily support BLOB_NONE filters with bitmaps. Since we know the
types of all of the objects, we just need to clear the result bits of
any blobs.
Note two subtleties in the implementation (which I also called out in
comments):
- we have to include any blobs that were specifically asked for (and
not reached through graph traversal) to match the non-bitmap version
- we have to handle in-pack and "ext_index" objects separately.
Arguably prepare_bitmap_walk() could be adding these ext_index
objects to the type bitmaps. But it doesn't for now, so let's match
the rest of the bitmap code here (it probably wouldn't be an
efficiency improvement to do so since the cost of extending those
bitmaps is about the same as our loop here, but it might make the
code a bit simpler).
Here are perf results for the new test on git.git:
Test HEAD^ HEAD
--------------------------------------------------------------------------------
5310.9: rev-list count with blob:none 1.67(1.62+0.05) 0.22(0.21+0.02) -86.8%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently you can't use object filters with bitmaps, but we plan to
support at least some filters with bitmaps. Let's introduce some
infrastructure that will help us do that:
- prepare_bitmap_walk() now accepts a list_objects_filter_options
parameter (which can be NULL for no filtering; all the current
callers pass this)
- we'll bail early if the filter is incompatible with bitmaps (just as
we would if there were no bitmaps at all). Currently all filters are
incompatible.
- we'll filter the resulting bitmap; since there are no supported
filters yet, this is always a noop.
There should be no behavior change yet, but we'll support some actual
filters in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since we added reachability bitmap support, we've been able to use
it with rev-list to get the full list of objects, like:
git rev-list --objects --use-bitmap-index --all
But you can't do so without --objects, since we weren't ready to just
show the commits. However, the internals of the bitmap code are mostly
ready for this: they avoid opening up trees when walking to fill in the
bitmaps. We just need to actually pass in the rev_info to
traverse_bitmap_commit_list() so it knows which types to bother
triggering our callback for.
For completeness, the perf test now covers both the existing --objects
case, as well as the new commits-only behavior (the objects one got way
faster when we introduced bitmaps, but obviously isn't improved now).
Here are numbers for linux.git:
Test HEAD^ HEAD
------------------------------------------------------------------------
5310.7: rev-list (commits) 8.29(8.10+0.19) 1.76(1.72+0.04) -78.8%
5310.8: rev-list (objects) 8.06(7.94+0.12) 8.14(7.94+0.13) +1.0%
That run was cheating a little, as I didn't have any commit-graph in the
repository, and we'd built it by default these days when running git-gc.
Here are numbers with a commit-graph:
Test HEAD^ HEAD
------------------------------------------------------------------------
5310.7: rev-list (commits) 0.70(0.58+0.12) 0.51(0.46+0.04) -27.1%
5310.8: rev-list (objects) 6.20(6.09+0.10) 6.27(6.16+0.11) +1.1%
Still an improvement, but a lot less impressive.
We could have the perf script remove any commit-graph to show the
out-sized effect, but it probably makes sense to leave it in what would
be a more typical setup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-list has refused to use bitmaps with pathspec limiting since
c8a70d3509 (rev-list: disable --use-bitmap-index when pruning commits,
2015-07-01). But this is true not just for rev-list, but for anyone who
calls prepare_bitmap_walk(); the code isn't equipped to handle this
case. We never noticed because the only other callers would never pass
a pathspec limiter.
But let's push the check down into prepare_bitmap_walk() anyway. That's
a more logical place for it to live, as callers shouldn't need to know
the details (and must be prepared to fall back to a regular traversal
anyway, since there might not be bitmaps in the repository).
It would also prepare us for a day where this case _is_ handled, but
that's pretty unlikely. E.g., we could use bitmaps to generate the set
of commits, and then diff each commit to see if it matches the pathspec.
That would be slightly faster than a naive traversal that actually walks
the commits. But you'd probably do better still to make use of the newer
commit-graph feature to make walking the commits very cheap.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we do a bitmap-aware revision traversal, we create an object_list
for each of the "haves" and "wants" tips. After creating the result
bitmaps these are no longer needed or used, but we never free the list
memory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When count_object_type() wants to iterate over the bitmap of all objects
of a certain type, we have to pair up OBJ_COMMIT with bitmap->commits,
and so forth. Since we're about to add more code to iterate over these
bitmaps, let's pull the initialization into its own function.
We can also use this to simplify traverse_bitmap_commit_list(). It
accomplishes the same thing by manually passing the object type and the
bitmap to show_objects_for_type(), but using our helper we just need the
object type.
Note there's one small code change here: previously we'd simply return
zero when counting an unknown object type, and now we'll BUG(). This
shouldn't matter in practice, as all of the callers pass in only usual
commit/tree/blob/tag types.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We no longer compute bitmap_git->reuse_objects, so we
cannot rely on it anymore to terminate the loop early;
we have to iterate to the end.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old code to reuse deltas from an existing packfile
just tried to dump a whole segment of the pack verbatim.
That's faster than the traditional way of actually adding
objects to the packing list, but it didn't kick in very
often. This new code is really going for a middle ground:
do _some_ per-object work, but way less than we'd
traditionally do.
The general strategy of the new code is to make a bitmap
of objects from the packfile we'll include, and then
iterate over it, writing out each object exactly as it is
in our on-disk pack, but _not_ adding it to our packlist
(which costs memory, and increases the search space for
deltas).
One complication is that if we're omitting some objects,
we can't set a delta against a base that we're not
sending. So we have to check each object in
try_partial_reuse() to make sure we have its delta.
About performance, in the worst case we might have
interleaved objects that we are sending or not sending,
and we'd have as many chunks as objects. But in practice
we send big chunks.
For instance, packing torvalds/linux on GitHub servers
now reused 6.5M objects, but only needed ~50k chunks.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's refactor bitmap_has_oid_in_uninteresting() using
bitmap_walk_contains().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bitmap_has_oid_in_uninteresting() only used bitmap_position_packfile(),
not bitmap_position(). So it wouldn't find objects which weren't in the
bitmapped packfile (i.e., ones where we extended the bitmap to handle
loose objects, or objects in other packs).
As we could reuse a delta against such an object it is suboptimal not
to use bitmap_position(), so let's use it instead of
bitmap_position_packfile().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will use this helper function in a following commit to
tell us if an object is packed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various fixes to codepaths gcc 9 had trouble following dataflow.
* jk/misc-uninitialized-fixes:
pack-objects: drop packlist index_pos optimization
test-read-cache: drop namelen variable
diff-delta: set size out-parameter to 0 for NULL delta
bulk-checkin: zero-initialize hashfile_checkpoint
pack-objects: use object_id in packlist_alloc()
git-am: handle missing "author" when parsing commit
Once upon a time, the code to add an object to our packing list in
pack-objects all lived in a single function. It computed the position
within the hash table once, then used it to check if the object was
already present, and if not, to add it.
Later, in 2834bc27c1 (pack-objects: refactor the packing list,
2013-10-24), this was split into two functions: packlist_find() and
packlist_alloc(). We ended up with an "index_pos" variable that gets
passed through several functions to make it from one to the other.
The resulting code is rather confusing to follow. The "index_pos"
variable is sometimes undefined, if we don't yet have a hash table. This
works out in practice because in that case packlist_alloc() won't use it
at all, since it will have to create/grow the hash table. But it's hard
to verify that, and it does cause gcc 9.2.1's -Wmaybe-uninitialized to
complain when compiled with "-flto -O3" (rightfully, since we do pass
the uninitialized value as a function parameter, even if nobody ends up
using it).
All of this is to save computing the hash index again when we're
inserting into the hash table, which I found doesn't make a measurable
difference in the program runtime (which is not surprising, since we're
doing all kinds of other heavyweight things for each object).
Let's just drop this index_pos variable entirely, simplifying the code
(and pleasing the compiler).
We might be better still refactoring this custom hash table to use one
of our existing implementations (an oidmap, or a kh_oid_map). I stopped
short of that here, but this would be the likely first step towards that
anyway.
Reported-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function for accessing the ID of the object referenced by a tag
safely, i.e. without causing a segfault when encountering a broken tag
where ->tagged is NULL.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the users of our khash_sha1 maps actually have a "struct
object_id". Let's use the more descriptive type.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5a8643eff1 (khash: move oid hash table definition, 2019-02-19)
added a khash "oid_map" type to match the existing "oid" type, which is
a simple set (i.e., just keys, no values). But in setting up the
khash_oid_map typedef, it accidentally referred to "kh_oid_t", which is
the set type.
Nobody noticed the breakage because there are not yet any callers; the
type was added just as a match to the existing sha1 types (whose map
type confusingly _is_ called khash_sha1, and it has no matching set
type).
We could easily fix this with s/oid/oid_map/ in the typedef. But let's
take this a step further, and just drop the typedef entirely. These
typedefs were added by 5a8643eff1 to match the khash_sha1 typedefs. But
the actual khash-derived type names are descriptive enough; this is just
adding an extra layer of indirection. The khash names do not quite
follow our usual style (e.g., they end in "_t"), but since we end up
using other khash names (e.g., khiter_t, kh_get_oid()) anyway, just
typedef-ing the struct name is not really helping much.
And there are already many cases where we use the raw khash type names
anyway (e.g., the "set" variant defined just above us does not have such
a typedef!).
So let's drop this typedef, and the matching oid_pos one (which actually
_does_ have a user, but we can easily convert it).
We'll leave the khash_sha1 typedef around. The ultimate fate of its
callers should be conversion to kh_oid_map_t, so there's no point in
going through the noise of changing the names now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We take a raw hash pointer, but most of our callers have a "struct
object_id" already. Let's switch to taking the full struct, which will
let us continue removing uses of raw sha1 buffers.
There are two callers that do need special attention:
- in rebuild_existing_bitmaps(), we need to switch to
nth_packed_object_oid(). This incurs an extra hash copy over
pointing straight to the mmap'd sha1, but it shouldn't be measurable
compared to the rest of the operation.
- in can_reuse_delta() we already spent the effort to copy the sha1
into a "struct object_id", but now we just have to do so a little
earlier in the function (we can't easily convert that function's
callers because they may be pointing at mmap'd REF_DELTA blocks).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from unsigned char[20] to struct object_id continues.
* bc/hash-transition-16: (35 commits)
gitweb: make hash size independent
Git.pm: make hash size independent
read-cache: read data in a hash-independent way
dir: make untracked cache extension hash size independent
builtin/difftool: use parse_oid_hex
refspec: make hash size independent
archive: convert struct archiver_args to object_id
builtin/get-tar-commit-id: make hash size independent
get-tar-commit-id: parse comment record
hash: add a function to lookup hash algorithm by length
remote-curl: make hash size independent
http: replace sha1_to_hex
http: compute hash of downloaded objects using the_hash_algo
http: replace hard-coded constant with the_hash_algo
http-walker: replace sha1_to_hex
http-push: remove remaining uses of sha1_to_hex
http-backend: allow 64-character hex names
http-push: convert to use the_hash_algo
builtin/pull: make hash-size independent
builtin/am: make hash size independent
...
We can't create a pack revindex if we haven't actually looked at the
index. Normally we would never get as far as creating a revindex without
having already been looking in the pack, so this code never bothered to
double-check that pack->index_data had been loaded.
But with the new multi-pack-index feature, many code paths might not
load the individual pack .idx at all (they'd find objects via the midx
and then open the .pack, but not its index).
This can't yet be triggered in practice, because a bug in the midx code
means we accidentally open up the individual .idx files anyway. But in
preparation for fixing that, let's have the revindex code check that
everything it needs has been loaded.
In most cases this will just be a quick noop. But note that this does
introduce a possibility of error (if we have to open the index and it's
corrupt), so load_pack_revindex() now returns a result code, and callers
need to handle the error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of storing unsigned char pointers in the hash tables, switch to
storing instances of struct object_id. Update several internal functions
and one external function to take pointers to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch two hard-coded uses of 20 to references to the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the uses of sha1_to_hex in the pack bitmap code with hash_to_hex
to allow the use of SHA-256 as well. Rename a few variables since they
are no longer limited to SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct stored_bitmap to use struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Increase the checksum field in struct bitmap_disk_header to be
GIT_MAX_RAWSZ bytes in length and ensure that we hash the proper number
of bytes out when computing the bitmap checksum.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hotfix of the base topic.
* jk/pack-objects-with-bitmap-fix:
pack-bitmap: drop "loaded" flag
traverse_bitmap_commit_list(): don't free result
t5310: test delta reuse with bitmaps
bitmap_has_sha1_in_uninteresting(): drop BUG check
When creating a thin pack, which allows objects to be made into a
delta against another object that is not in the resulting pack but
is known to be present on the receiving end, the code learned to
take advantage of the reachability bitmap; this allows the server
to send a delta against a base beyond the "boundary" commit.
* jk/pack-delta-reuse-with-bitmap:
pack-objects: reuse on-disk deltas for thin "have" objects
pack-bitmap: save "have" bitmap from walk
t/perf: add perf tests for fetches from a bitmapped server
t/perf: add infrastructure for measuring sizes
t/perf: factor out percent calculations
t/perf: factor boilerplate out of test_perf
In the early days of the bitmap code, there was a single
static bitmap_index struct that was used behind the scenes,
and any bitmap-related functions could lazily check
bitmap_git.loaded to see if they needed to read the on-disk
data.
But since 3ae5fa0768 (pack-bitmap: remove bitmap_git global
variable, 2018-06-07), the caller is responsible for the
lifetime of the bitmap_index struct, and we return it from
prepare_bitmap_git() and prepare_bitmap_walk(), both of
which load the on-disk data (or return NULL).
So outside of these functions, it's not possible to have a
bitmap_index for which the loaded flag is not true. Nor is
it possible to accidentally pass an already-loaded
bitmap_index to the loading function (which is static-local
to the file).
We can drop this unnecessary and confusing flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since it was introduced in fff42755ef (pack-bitmap: add
support for bitmap indexes, 2013-12-21), this function has
freed the result after traversing it. That is an artifact of
the early days of the bitmap code, when we had a single
static "struct bitmap_index". Back then, it was intended
that you would do:
prepare_bitmap_walk(&revs);
traverse_bitmap_commit_list(&revs);
Since the actual bitmap_index struct was totally behind the
scenes, it was convenient for traverse_bitmap_commit_list()
to clean it up, clearing the way for another traversal.
But since 3ae5fa0768 (pack-bitmap: remove bitmap_git global
variable, 2018-06-07), the caller explicitly manages the
bitmap_index struct itself, like this:
b = prepare_bitmap_walk(&revs);
traverse_bitmap_commit_list(b, &revs);
free_bitmap_index(b);
It no longer makes sense to auto-free the result after the
traversal. If you want to do another traversal, you'd just
create a new bitmap_index. And while nobody tries to call
traverse_bitmap_commit_list() twice, the fact that it throws
away the result might be surprising, and is better avoided.
Note that in the "old" way it was possible for two walks to
amortize the cost of opening the on-disk .bitmap file (since
it was stored in the global bitmap_index), but we lost that
in 3ae5fa0768. However, no code actually does this, so it's
not worth addressing now. The solution might involve a new:
reset_bitmap_walk(b, &revs);
call. Or we might even attach the bitmap data to its
matching packed_git struct, so that multiple
prepare_bitmap_walk() calls could use it. That can wait
until somebody actually has need of the optimization (and
until then, we'll do the correct, unsurprising thing).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 30cdc33fba (pack-bitmap: save "have" bitmap from
walk, 2018-08-21) introduced a new function for looking at
the "have" side of a bitmap walk. Because it only makes
sense to do so after we've finished the walk, we added an
extra safety assertion, making sure that bitmap_git->result
is non-NULL.
However, this safety is misguided. It was trying to catch
the case where we had called prepare_bitmap_walk() to give
us a "struct bitmap_index", but had not yet called
traverse_bitmap_commit_list() to walk it. But all of the
interesting computation (including setting up the result and
"have" bitmaps) happens in the first function! The latter
function only delivers the result to a callback function.
So the case we were worried about is impossible; if you get
a non-NULL result from prepare_bitmap_walk(), then its
"have" field will be fully formed.
But much worse, traverse_bitmap_commit_list() actually frees
the result field as it finishes. Which means that this
assertion is worse than useless: it's almost guaranteed to
trigger!
Our test suite didn't catch this because the function isn't
actually exercised at all. The only caller comes from
6a1e32d532 (pack-objects: reuse on-disk deltas for thin
"have" objects, 2018-08-21), and that's triggered only when
you fetch or push history that contains an object with a
base that is found deep in history. Our test suite fetches
and pushes either don't use bitmaps, or use too-small
example repositories. But any reasonably-sized real-world
push or fetch (with bitmaps) would trigger this.
This patch drops the harmful assertion and tweaks the
docstring for the function to make the precondition clear.
The tests need to be improved to exercise this new
pack-objects feature, but we'll do that in a separate
commit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we do a bitmap walk, we save the result, which
represents (WANTs & ~HAVEs); i.e., every object we care
about visiting in our walk. However, we throw away the
haves bitmap, which can sometimes be useful, too. Save it
and provide an access function so code which has performed a
walk can query it.
A few notes on the accessor interface:
- the bitmap code calls these "haves" because it grew out
of the want/have negotiation for fetches. But really,
these are simply the objects that would be flagged
UNINTERESTING in a regular traversal. Let's use that
more universal nomenclature for the external module
interface. We may want to change the internal naming
inside the bitmap code, but that's outside the scope of
this patch.
- it still uses a bare "sha1" rather than "oid". That's
true of all of the bitmap code. And in this particular
instance, our caller in pack-objects is dealing with the
bare sha1 that comes from a packed REF_DELTA (we're
pointing directly to the mmap'd pack on disk). That's
something we'll have to deal with as we transition to a
new hash, but we can wait and see how the caller ends up
being fixed and adjust this interface accordingly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many places in the codebase that want to iterate over
all packfiles known to Git. The purposes are wide-ranging, and
those that can take advantage of the multi-pack-index already
do. So, use get_all_packs() instead of get_packed_git() to be
sure we are iterating over all packfiles.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function to free struct bitmap_index instances, and use it where
needed (except when rebuild_existing_bitmaps() is used, since it creates
references to the bitmaps within the struct bitmap_index passed to it).
Note that the hashes field in struct bitmap_index is not freed because
it points to another field within the same struct. The documentation for
that field has been updated to clarify that.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the bitmap_git global variable. Instead, generate on demand an
instance of struct bitmap_index for code that needs to access it.
This allows us significant control over the lifetime of instances of
struct bitmap_index. In particular, packs can now be closed without
worrying if an unnecessarily long-lived "pack" field in struct
bitmap_index still points to it.
The bitmap API is also clearer in that we need to first obtain a struct
bitmap_index, then we use it.
This patch raises two potential issues: (1) memory for the struct
bitmap_index is allocated without being freed, and (2)
prepare_bitmap_git() and prepare_bitmap_walk() can reuse a previously
loaded bitmap. For (1), this will be dealt with in a subsequent patch in
this patch set that also deals with freeing the contents of the struct
bitmap_index (which were not freed previously, because they have global
scope). For (2), current bitmap users only load the bitmap once at most
(note that pack-objects can use bitmaps or write bitmaps, but not both
at the same time), so support for reuse has no effect - and future users
can pass around the struct bitmap_index * obtained if they need to do 2
or more things with the same bitmap.
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to read compressed bitmap was not careful to avoid reading
past the end of the file, which has been corrected.
* jk/ewah-bounds-check:
ewah: adjust callers of ewah_read_mmap()
ewah_read_mmap: bounds-check mmap reads
The return value of ewah_read_mmap() is now an ssize_t,
since we could (in theory) process up to 32GB of data. This
would never happen in practice, but a corrupt or malicious
.bitmap or index file could convince us to do so.
Let's make sure that we don't stuff the value into an int,
which would cause us to incorrectly move our pointer
forward. We'd always move too little, since negative values
are used for reporting errors. So the worst case is just
that we end up reporting a corrupt file, not an
out-of-bounds read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
In d8193743e0 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae5
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This field is only need for pack-bitmap, which is an optional
feature. Move it to a separate array that is only allocated when
pack-bitmap is used (like objects[], it is not freed, since we need it
until the end of the process)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reason callers have to call this is to make sure either packed_git
or packed_git_mru pointers are initialized since we don't do that by
default. Sometimes it's hard to see this connection between where the
function is called and where packed_git pointer is used (sometimes in
separate functions).
Keep this dependency internal because now all access to packed_git and
packed_git_mru must go through get_xxx() wrappers.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow prepare_packed_git callers to be
more specific about which repository to handle. See commit "sha1_file:
add repository argument to link_alt_odb_entry" for an explanation of
the #define trick.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a process with multiple repositories open, packfile accessors
should be associated to a single repository and not shared globally.
Move packed_git and packed_git_mru into the_repository and adjust
callers to reflect this.
[nd: while at there, wrap access to these two fields in get_packed_git()
and get_packed_git_mru(). This allows us to lazily initialize these
fields without caller doing that explicitly]
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>