Add and use a LIBCURL prerequisite for tests added in
6dcbdc0d66 (remote: create fetch.credentialsInUrl config,
2022-06-06).
These tests would get as far as emitting a couple of the warnings we
were testing for, but would then die as we had no "git-remote-https"
program compiled.
It would be more consistent with other prerequisites (e.g. PERL for
NO_PERL) to name this "CURL", but since e9184b0789 (t5561: skip tests
if curl is not available, 2018-04-03) we've had that prerequisite
defined for checking of we have the curl(1) program.
The existing "CURL" prerequisite is only used in one place, and we
should probably name it "CURL_PROGRAM", then rename "LIBCURL" to
"CURL" as a follow-up, but for now (pre-v2.37.0) let's aim for the
most minimal fix possible.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an issue that existed before 0527ccb1b5 (add -i: default to the
built-in implementation, 2021-11-30), but which became the default
with that change, we should not be marking tests that are known to
pass as "TODO" tests.
When GIT_TEST_ADD_I_USE_BUILTIN=1 was made the default we started
passing the tests added in 0f0fba2cc8 (t3701: add a test for advanced
split-hunk editing, 2019-12-06) and 1bf01040f0 (add -p: demonstrate
failure when running 'edit' after a split, 2015-04-16).
Thus we've been emitting this sort of output:
$ prove ./t3701-add-interactive.sh
./t3701-add-interactive.sh .. ok
All tests successful.
Test Summary Report
-------------------
./t3701-add-interactive.sh (Wstat: 0 Tests: 70 Failed: 0)
TODO passed: 45, 47
Files=1, Tests=70, 2 wallclock secs ( 0.03 usr 0.00 sys + 0.86 cusr 0.33 csys = 1.22 CPU)
Result: PASS
Which isn't just cosmetic, but due to issues with
test_expect_failure (see [1]) we could e.g. be hiding something as bad
as a segfault in the new implementation. It makes sense catch that,
especially before we put out a release with the built-in "add -i", so
let's generalize the check we were already doing in 0527ccb1b5 with a
new "ADD_I_USE_BUILTIN" prerequisite.
1. https://lore.kernel.org/git/patch-1.7-4624abc2591-20220318T002951Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the GitHub workflow support to make it quicker to get to the
failing test.
* js/ci-github-workflow-markup:
ci: call `finalize_test_case_output` a little later
ci(github): mention where the full logs can be found
ci: use `--github-workflow-markup` in the GitHub workflow
ci(github): avoid printing test case preamble twice
ci(github): skip the logs of the successful test cases
ci: optionally mark up output in the GitHub workflow
ci/run-build-and-tests: add some structure to the GitHub workflow output
ci: make it easier to find failed tests' logs in the GitHub workflow
ci/run-build-and-tests: take a more high-level view
test(junit): avoid line feeds in XML attributes
tests: refactor --write-junit-xml code
ci: fix code style
A bit of test framework fixes with a few fixes to issues found by
valgrind.
* ab/valgrind-fixes:
commit-graph.c: don't assume that stat() succeeds
object-file: fix a unpack_loose_header() regression in 3b6a8db3b0
log test: skip a failing mkstemp() test under valgrind
tests: using custom GIT_EXEC_PATH breaks --valgrind tests
We used to call that function already before printing the final verdict.
However, now that we added grouping to the GitHub workflow output, we
will want to include even that part in the collapsible group for that
test case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of commands exist to spruce up the output in GitHub workflows:
https://docs.github.com/en/actions/learn-github-actions/workflow-commands-for-github-actions
In addition to the `::group::<label>`/`::endgroup::` commands (which we
already use to structure the output of the build step better), we also
use `::error::`/`::notice::` to draw the attention to test failures and
to test cases that were expected to fail but didn't.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code writing JUnit XML is interspersed directly with all the code in
`t/test-lib.sh`, and it is therefore not only ill-separated, but
introducing yet another output format would make the situation even
worse.
Let's introduce an abstraction layer by hiding the JUnit XML code behind
four new functions that are supposed to be called before and after each
test and test case.
This is not just an academic exercise, refactoring for refactoring's
sake. We _actually_ want to introduce such a new output format, to
make it substantially easier to diagnose test failures in our GitHub
workflow, therefore we do need this refactoring.
This commit is best viewed with `git show --color-moved
--color-moved-ws=allow-indentation-change <commit>`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in b7d11a0f5d (tests: exercise the RUNTIME_PREFIX
feature, 2021-07-24) where tests that want to set up and test a "git"
wrapper in $PATH conflicted with the t/bin/valgrind wrapper(s) doing
the same.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid problems from interaction between malloc_check and address
sanitizer.
* pw/test-malloc-with-sanitize-address:
tests: make SANITIZE=address imply TEST_NO_MALLOC_CHECK
As the address sanitizer checks for a superset of the issues detected
by setting MALLOC_CHECK_ (which tries to detect things like double
frees and off-by-one errors) there is no need to set the latter when
compiling with -fsanitize=address.
This fixes a regression introduced by 131b94a10a ("test-lib.sh: Use
GLIBC_TUNABLES instead of MALLOC_CHECK_ on glibc >= 2.34", 2022-03-04)
which causes all the tests to fail with the message
ASan runtime does not come first in initial library list;
you should either link runtime to your application or
manually preload it with LD_PRELOAD.
when git is compiled with SANITIZE=address on systems with glibc >=
2.34. I have tested SANITIZE=leak and SANITIZE=undefined and they do
not suffer from this regression so the fix in this patch should be
sufficient.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Built-in fsmonitor (part 2).
* jh/builtin-fsmonitor-part2: (30 commits)
t7527: test status with untracked-cache and fsmonitor--daemon
fsmonitor: force update index after large responses
fsmonitor--daemon: use a cookie file to sync with file system
fsmonitor--daemon: periodically truncate list of modified files
t/perf/p7519: add fsmonitor--daemon test cases
t/perf/p7519: speed up test on Windows
t/perf/p7519: fix coding style
t/helper/test-chmtime: skip directories on Windows
t/perf: avoid copying builtin fsmonitor files into test repo
t7527: create test for fsmonitor--daemon
t/helper/fsmonitor-client: create IPC client to talk to FSMonitor Daemon
help: include fsmonitor--daemon feature flag in version info
fsmonitor--daemon: implement handle_client callback
compat/fsmonitor/fsm-listen-darwin: implement FSEvent listener on MacOS
compat/fsmonitor/fsm-listen-darwin: add MacOS header files for FSEvent
compat/fsmonitor/fsm-listen-win32: implement FSMonitor backend on Windows
fsmonitor--daemon: create token-based changed path cache
fsmonitor--daemon: define token-ids
fsmonitor--daemon: add pathname classification
fsmonitor--daemon: implement 'start' command
...
Add the "feature: fsmonitor--daemon" message to the output of
`git version --build-options`.
The builtin FSMonitor is only available on certain platforms and
even then only when certain Makefile flags are enabled, so print
a message in the verbose version output when it is available.
This can be used by test scripts for prereq testing. Granted, tests
could just try `git fsmonitor--daemon status` and look for a 128 exit
code or grep for a "not supported" message on stderr, but these
methods are rather obscure.
The main advantage is that the feature message will automatically
appear in bug reports and other support requests.
This concept was also used during the development of Scalar for
similar reasons.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "--immediate" option so that it emits valid TAP on
failure. Before this it would omit the required plan at the end,
e.g. under SANITIZE=leak we'd show a "No plan found in TAP output"
error from "prove":
$ prove t0006-date.sh :: --immediate
t0006-date.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/22 subtests
Test Summary Report
-------------------
t0006-date.sh (Wstat: 256 Tests: 22 Failed: 1)
Failed test: 22
Non-zero exit status: 1
Parse errors: No plan found in TAP output
Files=1, Tests=22, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.18 cusr 0.06 csys = 0.27 CPU)
Result: FAIL
Now we'll emit output that doesn't result in TAP parsing failures:
$ prove t0006-date.sh :: --immediate
t0006-date.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/22 subtests
Test Summary Report
-------------------
t0006-date.sh (Wstat: 256 Tests: 22 Failed: 1)
Failed test: 22
Non-zero exit status: 1
Files=1, Tests=22, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.19 cusr 0.05 csys = 0.26 CPU)
Result: FAIL
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The method to trigger malloc check used in our tests no longer work
with newer versions of glibc.
* ep/test-malloc-check-with-glibc-2.34:
test-lib: declare local variables as local
test-lib.sh: Use GLIBC_TUNABLES instead of MALLOC_CHECK_ on glibc >= 2.34
131b94a10a ("test-lib.sh: Use GLIBC_TUNABLES instead of MALLOC_CHECK_ on
glibc >= 2.34", 2022-03-04) introduced "local" variables without
declaring them as such. This conflicts with their use in some tests (at
least when running them with dash), leading to test failures in:
t0006-date.sh
t2002-checkout-cache-u.sh
t3430-rebase-merges.sh
t4138-apply-ws-expansion.sh
t4124-apply-ws-rule.sh
Declare those variables as local to let the tests pass again.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In glibc >= 2.34 MALLOC_CHECK_ and MALLOC_PERTURB_ environment
variables have been replaced by GLIBC_TUNABLES. Also the new
glibc requires that you preload a library called libc_malloc_debug.so
to get these features.
Using the ordinary glibc system variable detect if this is glibc >= 2.34 and
use GLIBC_TUNABLES and the new library.
This patch was inspired by a Richard W.M. Jones ndbkit patch
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "fast_unwind_on_malloc=0" to LSAN_OPTIONS to get more meaningful
stack traces from LSAN. This isn't required under ASAN which will emit
traces such as this one for a leak in "t/t0006-date.sh":
$ ASAN_OPTIONS=detect_leaks=1 ./t0006-date.sh -vixd
[...]
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x488b94 in strdup (t/helper/test-tool+0x488b94)
#1 0x9444a4 in xstrdup wrapper.c:29:14
#2 0x5995fa in parse_date_format date.c:991:24
#3 0x4d2056 in show_dates t/helper/test-date.c:39:2
#4 0x4d174a in cmd__date t/helper/test-date.c:116:3
#5 0x4cce89 in cmd_main t/helper/test-tool.c:127:11
#6 0x4cd1e3 in main common-main.c:52:11
#7 0x7fef3c695e49 in __libc_start_main csu/../csu/libc-start.c:314:16
#8 0x422b09 in _start (t/helper/test-tool+0x422b09)
SUMMARY: AddressSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
Whereas LSAN would emit this instead:
$ ./t0006-date.sh -vixd
[...]
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x4323b8 in malloc (t/helper/test-tool+0x4323b8)
#1 0x7f2be1d614aa in strdup string/strdup.c:42:15
SUMMARY: LeakSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
Now we'll instead git this sensible stack trace under
LSAN. I.e. almost the same one (but starting with "malloc", as is
usual for LSAN) as under ASAN:
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x4323b8 in malloc (t/helper/test-tool+0x4323b8)
#1 0x7f012af5c4aa in strdup string/strdup.c:42:15
#2 0x5cb164 in xstrdup wrapper.c:29:14
#3 0x495ee9 in parse_date_format date.c:991:24
#4 0x453aac in show_dates t/helper/test-date.c:39:2
#5 0x453782 in cmd__date t/helper/test-date.c:116:3
#6 0x451d95 in cmd_main t/helper/test-tool.c:127:11
#7 0x451f1e in main common-main.c:52:11
#8 0x7f012aef5e49 in __libc_start_main csu/../csu/libc-start.c:314:16
#9 0x42e0a9 in _start (t/helper/test-tool+0x42e0a9)
SUMMARY: LeakSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
As the option name suggests this does make things slower, e.g. for
t0001-init.sh we're around 10% slower:
$ hyperfine -L v 0,1 'LSAN_OPTIONS=fast_unwind_on_malloc={v} make T=t0001-init.sh' -r 3
Benchmark 1: LSAN_OPTIONS=fast_unwind_on_malloc=0 make T=t0001-init.sh
Time (mean ± σ): 2.135 s ± 0.015 s [User: 1.951 s, System: 0.554 s]
Range (min … max): 2.122 s … 2.152 s 3 runs
Benchmark 2: LSAN_OPTIONS=fast_unwind_on_malloc=1 make T=t0001-init.sh
Time (mean ± σ): 1.981 s ± 0.055 s [User: 1.769 s, System: 0.488 s]
Range (min … max): 1.941 s … 2.044 s 3 runs
Summary
'LSAN_OPTIONS=fast_unwind_on_malloc=1 make T=t0001-init.sh' ran
1.08 ± 0.03 times faster than 'LSAN_OPTIONS=fast_unwind_on_malloc=0 make T=t0001-init.sh'
I think that's more than worth it to get the more meaningful stack
traces, we can always provide LSAN_OPTIONS=fast_unwind_on_malloc=0 for
one-off "fast" runs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the GIT_BUILD_DIR from a path like "/path/to/build/t/.." to
"/path/to/build". The "TEST_DIRECTORY" here is already made an
absolute path a few lines above this.
We could simply do $(cd "$TEST_DIRECTORY"/.." && pwd) here, but as
noted in the preceding commit the "$TEST_DIRECTORY" can't be anything
except the path containing this test-lib.sh file at this point, so we
can more cheaply and equally strip the "/t" off the end.
This change will be helpful to LSAN_OPTIONS which will want to strip
the build directory path from filenames, which we couldn't do if we
had a "/.." in there.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct a misleading comment added by me in 62f539043c (test-lib:
Allow overriding of TEST_DIRECTORY, 2010-08-19), and add an assertion
that TEST_DIRECTORY cannot point to any directory except the "t"
directory in the top-level of git.git.
This assertion is in effect not new, since we'd already die if that
wasn't the case[1], but it and the updated commentary help to make
that clearer.
The existing comments were also on the wrong arms of the
"if". I.e. the "allow tests to override this" was on the "test -z"
arm. That came about due to a combination of 62f539043c and
85176d7251 (test-lib.sh: convert $TEST_DIRECTORY to an absolute path,
2013-11-17).
Those earlier comments could be read as allowing the "$TEST_DIRECTORY"
to be some path outside of t/. As explained in the updated comment
that's impossible, rather it was meant for *tests* that ran outside of
t/, i.e. the "t0000-basic.sh" tests that use "lib-subtest.sh".
Those tests have a different working directory, but they set the
"TEST_DIRECTORY" to the same path for bootstrapping. The comments now
reflect that, and further comment on why we have a hard dependency on
this.
1. https://lore.kernel.org/git/220222.86o82z8als.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change our ASAN_OPTIONS and LSAN_OPTIONS to set defaults for those
variables, rather than punting out entirely if we already have them in
the environment.
We want to take any user-provided settings over our own, but we can do
that by prepending our defaults to the variable. The libsanitizer
options parsing has "last option wins" semantics.
It's now possible to do e.g.:
LSAN_OPTIONS=report_objects=1 ./t0006-date.sh
And not have the "report_objects=1" setting overwrite our sensible
default of "abort_on_error=1", but by prepending to the list we ensure
that:
LSAN_OPTIONS=report_objects=1:abort_on_error=0 ./t0006-date.sh
Will take the desired "abort_on_error=0" over our default.
See b0f4c9087e (t: support clang/gcc AddressSanitizer, 2014-12-08)
for the original pattern being altered here, and
85b81b35ff (test-lib: set LSAN_OPTIONS to abort by default,
2017-09-05) for when LSAN_OPTIONS was added in addition to the
then-existing ASAN_OPTIONS.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The trace2 subsystem can inherit certain information from parent
processes via environment variables; e.g., the parent command name and
session ID. This allows trace2 to note when a command is the child
process of another Git process, and to adjust various pieces of output
accordingly.
This behavior breaks certain tests that examine trace2 output when the
tests run as a child of another git process, such as in `git rebase -x
"make test"`.
While we could fix this by unsetting the relevant variables in the
affected tests (currently t0210, t0211, t0212, and t6421), this would
leave other tests vulnerable to similar breakage if new test cases are
added which inspect trace2 output. So fix this in general by unsetting
GIT_TRACE2_PARENT_NAME and GIT_TRACE2_PARENT_SID in test-lib.sh.
Reported-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default setting for trace2 event nesting was too low to cause
test failures, which is worked around by bumping it up in the test
framework.
* ds/trace2-regions-in-tests:
t/t*: remove custom GIT_TRACE2_EVENT_NESTING
test-lib.sh: set GIT_TRACE2_EVENT_NESTING
The test framework learns to list unsatisfied test prerequisites,
and optionally error out when prerequisites that are expected to be
satisfied are not.
* fs/test-prereq:
test-lib: make BAIL_OUT() work in tests and prereq
test-lib: introduce required prereq for test runs
test-lib: show missing prereq summary
BAIL_OUT() is meant to abort the whole test run and print a message with
a standard prefix that can be parsed to stdout. Since for every test the
normal fd`s are redirected in test_eval_ this output would not be seen
when used within the context of a test or prereq like we do in
test_have_prereq(). To make this function work in these contexts we move
the setup of the fd aliases a few lines up before the first use of
BAIL_OUT() and then have this function always print to the alias.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The clean/smudge conversion code path has been prepared to better
work on platforms where ulong is narrower than size_t.
* mc/clean-smudge-with-llp64:
clean/smudge: allow clean filters to process extremely large files
odb: guard against data loss checking out a huge file
git-compat-util: introduce more size_t helpers
odb: teach read_blob_entry to use size_t
t1051: introduce a smudge filter test for extremely large files
test-lib: add prerequisite for 64-bit platforms
test-tool genzeros: generate large amounts of data more efficiently
test-genzeros: allow more than 2G zeros in Windows
The GIT_TRACE2_EVENT feed has a limited nesting depth to avoid
overloading the feed when recursing into deep paths while adding more
nested regions.
Some tests use the GIT_TRACE2_EVENT feed to look for internal events,
ensuring that intended behavior is happening.
One such example is in t4216-log-bloom.sh which looks for a statistic
given as a trace2_data_intmax() call. This test started failing under
'-x' with 2ca245f8be (csum-file.h: increase hashfile buffer size,
2021-05-18) because the change in stderr triggered the progress API to
create an extra trace2 region, ejecting the statistic.
This change increases the value of GIT_TRACE2_EVENT_NESTING across the
entire test suite to avoid errors like this. Future changes will remove
custom assignments of GIT_TRACE2_EVENT_NESTING from some test scripts
that were aware of this limitation.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running the full test suite many tests can be skipped because of
missing prerequisites. It not easy right now to get an overview of which
ones are missing.
When switching to a new machine or environment some libraries and tools
might be missing or maybe a dependency broke completely. In this case
the tests would indicate nothing since all dependant tests are simply
skipped. This could hide broken behaviour or missing features in the
build. Therefore this patch summarizes the missing prereqs at the end of
the test run making it easier to spot such cases.
- Add failed prereqs to the test results.
- Aggregate and then show them with the totals.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow tests that assume a 64-bit `size_t` to be skipped in 32-bit
platforms and regardless of the size of `long`.
This imitates the `LONG_IS_64BIT` prerequisite.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new feature has been added to abort early in the test framework.
* ab/test-bail:
test-lib.sh: use "Bail out!" syntax on bad SANITIZE=leak use
test-lib.sh: de-duplicate error() teardown code
The "GIT_TEST_FSYNC" environment variable now exists for
disabling fsync() even on packfiles and other "critical" data.
Running "make test -j8 NO_SVN_TESTS=1" on a noisy 8-core system
on an HDD, test runtime drops from ~4 minutes down to ~3 minutes.
Using "GIT_TEST_FSYNC=1" re-enables fsync() for comparison
purposes.
SVN interopability tests are minimally affected since SVN will
still use fsync in various places.
This will also be useful for 3rd-party tools which create
throwaway git repositories of temporary data, but remains
undocumented for end users.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve test framework around unwritable directories.
* ab/test-cleanly-recreate-trash-directory:
test-lib.sh: try to re-chmod & retry on failed trash removal
The "--preserve-merges" option of "git rebase" has been removed.
* js/retire-preserve-merges:
sequencer: restrict scope of a formerly public function
rebase: remove a no-longer-used function
rebase: stop mentioning the -p option in comments
rebase: remove obsolete code comment
rebase: drop the internal `rebase--interactive` command
git-svn: drop support for `--preserve-merges`
rebase: drop support for `--preserve-merges`
pull: remove support for `--rebase=preserve`
tests: stop testing `git rebase --preserve-merges`
remote: warn about unhandled branch.<name>.rebase values
t5520: do not use `pull.rebase=preserve`
Try to re-chmod the trash directory on startup if we fail to "rm -rf"
it. This fixes problems where the test leaves the trash directory
behind in a bad permission state for whatever reason.
This fixes an interaction between [1] where t0004-unwritable.sh was
made to use "test_when_finished" for cleanup, and [2] which added the
"--immediate" mode. If a test in this file failed when running with
"--immediate" we wouldn't run the "test_when_finished" block, which
re-chmods the ".git/objects" directory (see [1]).
This can be demonstrated as e.g. (output snipped for less verbosity):
$ ./t0004-unwritable.sh --run=3 --immediate
ok 1 # skip setup (--run)
ok 2 # skip write-tree should notice unwritable repository (--run)
not ok 3 - commit should notice unwritable repository
[...]
$ ./t0004-unwritable.sh --run=3 --immediate
rm: cannot remove '[...]/trash directory.t0004-unwritable/.git/objects/info': Permission denied
FATAL: Cannot prepare test area
[...]
Instead of some version of reverting [1] let's make the test-lib.sh
resilient to this edge-case, it will happen due to [1], but also
e.g. if the relevant "test-lib.sh" process is kill -9'd during the
test run. We should try harder to recover in this case. If we fail to
remove the test directory let's retry after (re-)chmod-ing it.
This doesn't need to be guarded by something that's equivalent to
"POSIXPERM" since if we don't support "chmod" we were about to fail
anyway.
Let's also discard any error output from (a possibly nonexisting)
"chmod", we'll fail on the subsequent "rm -rf" anyway, likewise for
the first "rm -rf" invocation, we don't want to get the "cannot
remove" output if we can get around it with the "chmod", but we do
want any error output from the second "rm -rf", in case that doesn't
fix the issue.
The lack of &&-chaining between the "chmod" and "rm -rf" is
intentional, if we fail the first "rm -rf", can't chmod, but then
succeed the second time around that's what we were hoping for. We just
want to nuke the directory, not carry forward every possible error
code or error message.
1. dbda967684 (t0004 (unwritable files): simplify error handling,
2010-09-06)
2. b586744a86 (test: skip clean-up when running under --immediate
mode, 2011-06-27)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode added in
956d2e4639 (tests: add a test mode for SANITIZE=leak, run it in CI,
2021-09-23) to use a TAP "Bail out!" message when exiting. This will
cause the test run to exit immediately under a TAP consumer like
"prove(1)".
See 614fe01521 (test-lib: bail out when "-v" used under "prove",
2016-10-22) for the initial introduction of "Bail out!" to the
--verbose being amended here.
Before this compiling with "SANITIZE=" and running the tests with
"prove(1)" would cause all the tests to be run to the end (output
trimmed for fewer columns):
$ GIT_TEST_PASSING_SANITIZE_LEAK=true make
rm -f -r 'test-results'
*** prove ***
t0000-basic.sh ......... Dubious, test returned 1 (wstat 256, 0x100)
No subtests run
t0001-init.sh .......... Dubious, test returned 1 (wstat 256, 0x100)
No subtests run
[...output where we list every single t[0-9]*.sh file as failing snipped]
Whereas now we'll fail early, like this ("->" line wrapping added):
$ GIT_TEST_PASSING_SANITIZE_LEAK=true make
[...]
t0000-basic.sh ..................................... Bailout called. Further testing stopped:
-> GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except when compiled with SANITIZE=leak
FAILED--Further testing stopped: GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except
-> when compiled with SANITIZE=leak
make: *** [Makefile:53: prove] Error 1
This change also adds a red color to the "Bailout called" line, as
we're now using "say_color error". That improves existing output in
the case of e.g.:
$ prove -j8 t[0-9]*.sh :: -v
Bailout called. Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
FAILED--Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
We don't need to have a "Bail out! " prefix when we're not running
under a TAP consumer (i.e. if test -n "$HARNESS_ACTIVE"), but let's
not make the output conditional on that. Showing it under e.g.:
$ GIT_TEST_PASSING_SANITIZE_LEAK=true ./t0095-bloom.sh
Bail out! GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except when compiled with SANITIZE=leak
Doesn't harm anything, and I don't think the (small) complexity of
only adding this if we're under "$HARNESS_ACTIVE" is worth it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
De-duplicate the "finalize_junit_xml; GIT_EXIT_OK=t; exit 1" code
shared between the "error()" and "--immediate on failure" code paths,
in preparation for adding a third user in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CI learns to run the leak sanitizer builds.
* ab/sanitize-leak-ci:
tests: add a test mode for SANITIZE=leak, run it in CI
Makefile: add SANITIZE=leak flag to GIT-BUILD-OPTIONS
While git can be compiled with SANITIZE=leak, we have not run
regression tests under that mode. Memory leaks have only been fixed as
one-offs without structured regression testing.
This change adds CI testing for it. We'll now build and small set of
whitelisted t00*.sh tests under Linux with a new job called
"linux-leaks".
The CI target uses a new GIT_TEST_PASSING_SANITIZE_LEAK=true test
mode. When running in that mode, we'll assert that we were compiled
with SANITIZE=leak. We'll then skip all tests, except those that we've
opted-in by setting "TEST_PASSES_SANITIZE_LEAK=true".
A test setting "TEST_PASSES_SANITIZE_LEAK=true" setting can in turn
make use of the "SANITIZE_LEAK" prerequisite, should they wish to
selectively skip tests even under
"GIT_TEST_PASSING_SANITIZE_LEAK=true". In the preceding commit we
started doing this in "t0004-unwritable.sh" under SANITIZE=leak, now
it'll combine nicely with "GIT_TEST_PASSING_SANITIZE_LEAK=true".
This is how tests that don't set "TEST_PASSES_SANITIZE_LEAK=true" will
be skipped under GIT_TEST_PASSING_SANITIZE_LEAK=true:
$ GIT_TEST_PASSING_SANITIZE_LEAK=true ./t0001-init.sh
1..0 # SKIP skip all tests in t0001 under SANITIZE=leak, TEST_PASSES_SANITIZE_LEAK not set
The intent is to add more TEST_PASSES_SANITIZE_LEAK=true annotations
as follow-up change, but let's start small to begin with.
In ci/run-build-and-tests.sh we make use of the default "*" case to
run "make test" without any GIT_TEST_* modes. SANITIZE=leak is known
to fail in combination with GIT_TEST_SPLIT_INDEX=true in
t0016-oidmap.sh, and we're likely to have other such failures in
various GIT_TEST_* modes. Let's focus on getting the base tests
passing, we can expand coverage to GIT_TEST_* modes later.
It would also be possible to implement a more lightweight version of
this by only relying on setting "LSAN_OPTIONS". See
<YS9OT/pn5rRK9cGB@coredump.intra.peff.net>[1] and
<YS9ZIDpANfsh7N+S@coredump.intra.peff.net>[2] for a discussion of
that. I've opted for this approach of adding a GIT_TEST_* mode instead
because it's consistent with how we handle other special test modes.
Being able to add a "!SANITIZE_LEAK" prerequisite and calling
"test_done" early if it isn't satisfied also means that we can more
incrementally add regression tests without being forced to fix
widespread and hard-to-fix leaks at the same time.
We have tests that do simple checking of some tool we're interested
in, but later on in the script might be stressing trace2, or common
sources of leaks like "git log" in combination with the tool (e.g. the
commit-graph tests). To be clear having a prerequisite could also be
accomplished by using "LSAN_OPTIONS" directly.
On the topic of "LSAN_OPTIONS": It would be nice to have a mode to
aggregate all failures in our various scripts, see [2] for a start at
doing that which sets "log_path" in "LSAN_OPTIONS". I've punted on
that for now, it can be added later.
As of writing this we've got major regressions between master..seen,
i.e. the t000*.sh tests and more fixed since 31f9acf9ce (Merge branch
'ah/plugleaks', 2021-08-04) have regressed recently.
See the discussion at <87czsv2idy.fsf@evledraar.gmail.com>[3] about
the lack of this sort of test mode, and 0e5bba53af (add UNLEAK
annotation for reducing leak false positives, 2017-09-08) for the
initial addition of SANITIZE=leak.
See also 09595ab381 (Merge branch 'jk/leak-checkers', 2017-09-19),
7782066f67 (Merge branch 'jk/apache-lsan', 2019-05-19) and the recent
936e58851a (Merge branch 'ah/plugleaks', 2021-05-07) for some of the
past history of "one-off" SANITIZE=leak (and more) fixes.
As noted in [5] we can't support this on OSX yet until Clang 14 is
released, at that point we'll probably want to resurrect that
"osx-leaks" job.
1. https://github.com/google/sanitizers/wiki/AddressSanitizerLeakSanitizer
2. https://lore.kernel.org/git/YS9OT%2Fpn5rRK9cGB@coredump.intra.peff.net/
3. https://lore.kernel.org/git/87czsv2idy.fsf@evledraar.gmail.com/
4. https://lore.kernel.org/git/YS9ZIDpANfsh7N+S@coredump.intra.peff.net/
5. https://lore.kernel.org/git/20210916035603.76369-1-carenas@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When SANITIZE=leak is specified we'll now add a SANITIZE_LEAK flag to
GIT-BUILD-OPTIONS, this can then be picked up by the test-lib.sh,
which sets a SANITIZE_LEAK prerequisite.
We can then skip specific tests that are known to fail under
SANITIZE=leak, add one such annotation to t0004-unwritable.sh, which
now passes under SANITIZE=leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "test_pause" and "debug" helpers to allow using the HOME and
TERM environment variables the user usually uses.
* pb/test-use-user-env:
test-lib-functions: keep user's debugger config files and TERM in 'debug'
test-lib-functions: optionally keep HOME, TERM and SHELL in 'test_pause'
test-lib-functions: use 'TEST_SHELL_PATH' in 'test_pause'
These two have fallen out of use with the SHA-256 migration.
The last use of $_x40 was removed in fc7e73d7ef (t4013: improve
diff-post-processor logic, 2020-08-21) and
The last use of $_z40 was removed in 7a868c51c2 (t5562: use $ZERO_OID,
2019-12-21), but it was then needlessly refactored to be hash-agnostic
in 192b517589 (t: use hash-specific lookup tables to define test
constants, 2020-02-22). We can just remove it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This backend has been deprecated in favor of `git rebase
--rebase-merges`.
In preparation for dropping it, let's remove all the regression tests
that would need it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'test_pause' function, which is designed to help interactive
debugging and exploration of tests, currently inherits the value of HOME
and TERM set by 'test-lib.sh': HOME="$TRASH_DIRECTORY" and TERM=dumb. It
also invokes the shell defined by TEST_SHELL_PATH, which defaults to
/bin/sh (through SHELL_PATH).
Changing the value of HOME means that any customization configured in a
developers' shell startup files and any Git aliases defined in their
global Git configuration file are not available in the shell invoked by
'test_pause'.
Changing the value of TERM to 'dumb' means that colored output
is disabled for all commands in that shell.
Using /bin/sh as the shell invoked by 'test_pause' is not ideal since
some platforms (i.e. Debian and derivatives) use Dash as /bin/sh, and
this shell is usually compiled without readline support, which makes for
a poor interactive command line experience.
To make the interactive command line experience in the shell invoked by
'test_pause' more pleasant, save the values of HOME and TERM in
USER_HOME and USER_TERM before changing them in test-lib.sh, and add
options to 'test_pause' to optionally use these variables to invoke the
shell. Also add an option to invoke SHELL instead of TEST_SHELL_PATH, so
that developer's interactive shell is used.
We use options instead of changing the behaviour unconditionally since
these three variables can slightly change command behaviour. Moreover,
using the original HOME means commands could overwrite files in a user's
home directory. Be explicit about these caveats in the new 'Usage'
section in test-lib-functions.sh.
Finally, add '[options]' to the test_pause synopsys in t/README, and
mention that the full list of helper functions and their options can be
found in test-lib-functions.sh.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every once in a while a test somehow manages to escape from its trash
directory and modifies the surrounding repository, whether because of
a bug in git itself, a bug in a test [1], or e.g. when trying to run
tests with a shell that is, in general, unable to run our tests [2].
Set GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/.." as an additional
safety measure to protect the surrounding repository at least from
modifications by git commands executed in the tests (assuming that
handling of ceiling directories during repository discovery is not
broken, and, of course, it won't save us from regular shell commands,
e.g. 'cd .. && rm -f ...').
[1] e.g. https://public-inbox.org/git/20210423051255.GD2947267@szeder.dev
[2] $ git symbolic-ref HEAD
refs/heads/master
$ ksh ./t2011-checkout-invalid-head.sh
[... a lot of "not ok" ...]
$ git symbolic-ref HEAD
refs/heads/other
(In short: 'ksh' doesn't support the 'local' builtin command,
which is used by 'test_oid', causing it to return with error
whenever it's called, leaving ZERO_OID set to empty, so when the
test 'checkout main from invalid HEAD' runs 'echo $ZERO_OID
>.git/HEAD' it writes a corrupt (not invalid) HEAD, and subsequent
git commands don't recognize the repository in the trash directory
anymore, but operate on the surrounding repo.)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c49a177bec (test-lib.sh: set COLUMNS=80 for --verbose
repeatability, 2021-06-29) multiple tests have been failing when using
bash 5 because checkwinsize is enabled by default, therefore COLUMNS is
reset using TIOCGWINSZ even for non-interactive shells.
It's debatable whether or not bash should even be doing that, but for
now we can avoid this undesirable behavior by disabling this option.
Reported-by: Fabian Stelzer <fabian.stelzer@campoint.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
[jc: with SZEDER Gábor's suggestion to do this before setting COLUMNS]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows rmdir() equivalent behaves differently from POSIX ones in
that when used on a symbolic link that points at a directory, the
target directory gets removed, which has been corrected.
* tb/mingw-rmdir-symlink-to-directory:
mingw: align symlinks-related rmdir() behavior with Linux
When performing a rebase, rmdir() is called on the folder .git/logs. On
Unix rmdir() exits without deleting anything in case .git/logs is a
symbolic link but the equivalent functions on Windows (_rmdir, _wrmdir
and RemoveDirectoryW) do not behave the same and remove the folder if it
is symlinked even if it is not empty.
This creates issues when folders in .git/ are symlinks which is
especially the case when git-repo[1] is used: It replaces `.git/logs/`
with a symlink.
One such issue is that the _target_ of that symlink is removed e.g.
during a `git rebase`, where `delete_reflog("REBASE_HEAD")` will not
only try to remove `.git/logs/REBASE_HEAD` but then recursively try to
remove the parent directories until an error occurs, a technique that
obviously relies on `rmdir()` refusing to remove a symlink.
This was reported in https://github.com/git-for-windows/git/issues/2967.
This commit updates mingw_rmdir() so that its behavior is the same as
Linux rmdir() in case of symbolic links.
To verify that Git does not regress on the reported issue, this patch
adds a regression test for the `git rebase` symptom, even if the same
`rmdir()` behavior is quite likely to cause potential problems in other
Git commands as well.
[1]: git-repo is a python tool built on top of Git which helps manage
many Git repositories. It stores all the .git/ folders in a central
place by taking advantage of symbolic links.
More information: https://gerrit.googlesource.com/git-repo/
Signed-off-by: Thomas Bétous <tomspycell@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
