When closing a multi-pack-index, we intend to close each pack-file
and free the struct packed_git that represents it. However, this
line was previously freeing the array of pointers, not the
pointer itself. This leads to a double-free issue.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Git 2.19.1
Git 2.18.1
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.18:
Git 2.18.1
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.17:
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
As with urls, submodule paths with dashes are ignored by
git, but may end up confusing older versions. Detecting them
via fsck lets us prevent modern versions of git from being a
vector to spread broken .gitmodules to older versions.
Compared to blocking leading-dash urls, though, this
detection may be less of a good idea:
1. While such paths provide confusing and broken results,
they don't seem to actually work as option injections
against anything except "cd". In particular, the
submodule code seems to canonicalize to an absolute
path before running "git clone" (so it passes
/your/clone/-sub).
2. It's more likely that we may one day make such names
actually work correctly. Even after we revert this fsck
check, it will continue to be a hassle until hosting
servers are all updated.
On the other hand, it's not entirely clear that the behavior
in older versions is safe. And if we do want to eventually
allow this, we may end up doing so with a special syntax
anyway (e.g., writing "./-sub" in the .gitmodules file, and
teaching the submodule code to canonicalize it when
comparing).
So on balance, this is probably a good protection.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Urls with leading dashes can cause mischief on older
versions of Git. We should detect them so that they can be
rejected by receive.fsckObjects, preventing modern versions
of git from being a vector by which attacks can spread.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.16:
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.15:
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.14:
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
We recently banned submodule urls that look like
command-line options. This is the matching change to ban
leading-dash paths.
As with the urls, this should not break any use cases that
currently work. Even with our "--" separator passed to
git-clone, git-submodule.sh gets confused. Without the code
portion of this patch, the clone of "-sub" added in t7417
would yield results like:
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
Fetched in submodule path '-sub', but it did not contain b56243f8f4eb91b2f1f8109452e659f14dd3fbe4. Direct fetching of that commit failed.
Moreover, naively adding such a submodule doesn't work:
$ git submodule add $url -sub
The following path is ignored by one of your .gitignore files:
-sub
even though there is no such ignore pattern (the test script
hacks around this with a well-placed "git mv").
Unlike leading-dash urls, though, it's possible that such a
path _could_ be useful if we eventually made it work. So
this commit should be seen not as recommending a particular
policy, but rather temporarily closing off a broken and
possibly dangerous code-path. We may revisit this decision
later.
There are two minor differences to the tests in t7416 (that
covered urls):
1. We don't have a "./-sub" escape hatch to make this
work, since the submodule code expects to be able to
match canonical index names to the path field (so you
are free to add submodule config with that path, but we
would never actually use it, since an index entry would
never start with "./").
2. After this patch, cloning actually succeeds. Since we
ignore the submodule.*.path value, we fail to find a
config stanza for our submodule at all, and simply
treat it as inactive. We still check for the "ignoring"
message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit taught the submodule code to invoke our
"git clone $url $path" with a "--" separator so that we
aren't confused by urls or paths that start with dashes.
However, that's just one code path. It's not clear if there
are others, and it would be an easy mistake to add one in
the future. Moreover, even with the fix in the previous
commit, it's quite hard to actually do anything useful with
such an entry. Any url starting with a dash must fall into
one of three categories:
- it's meant as a file url, like "-path". But then any
clone is not going to have the matching path, since it's
by definition relative inside the newly created clone. If
you spell it as "./-path", the submodule code sees the
"/" and translates this to an absolute path, so it at
least works (assuming the receiver has the same
filesystem layout as you). But that trick does not apply
for a bare "-path".
- it's meant as an ssh url, like "-host:path". But this
already doesn't work, as we explicitly disallow ssh
hostnames that begin with a dash (to avoid option
injection against ssh).
- it's a remote-helper scheme, like "-scheme::data". This
_could_ work if the receiver bends over backwards and
creates a funny-named helper like "git-remote--scheme".
But normally there would not be any helper that matches.
Since such a url does not work today and is not likely to do
anything useful in the future, let's simply disallow them
entirely. That protects the existing "git clone" path (in a
belt-and-suspenders way), along with any others that might
exist.
Our tests cover two cases:
1. A file url with "./" continues to work, showing that
there's an escape hatch for people with truly silly
repo names.
2. A url starting with "-" is rejected.
Note that we expect case (2) to fail, but it would have done
so even without this commit, for the reasons given above.
So instead of just expecting failure, let's also check for
the magic word "ignoring" on stderr. That lets us know that
we failed for the right reason.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we clone a submodule, we call "git clone $url $path".
But there's nothing to say that those components can't begin
with a dash themselves, confusing git-clone into thinking
they're options. Let's pass "--" to make it clear what we
expect.
There's no test here, because it's actually quite hard to
make these names work, even with "git clone" parsing them
correctly. And we're going to restrict these cases even
further in future commits. So we'll leave off testing until
then; this is just the minimal fix to prevent us from doing
something stupid with a badly formed entry.
Reported-by: joernchen <joernchen@phenoelit.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently added "range-diff" had a corner-case bug to cause it
segfault, which has been corrected.
* tg/range-diff-corner-case-fix:
linear-assignment: fix potential out of bounds memory access
"git update-ref" learned to make both "--no-deref" and "--stdin"
work at the same time.
* en/update-ref-no-deref-stdin:
update-ref: allow --no-deref with --stdin
update-ref: fix type of update_flags variable to match its usage
Update error messages given by "git remote" and make them consistent.
* ms/remote-error-message-update:
builtin/remote: quote remote name on error to display empty name
The code to backfill objects in lazily cloned repository did not
work correctly, which has been corrected.
* jt/lazy-object-fetch-fix:
fetch-object: set exact_oid when fetching
fetch-object: unify fetch_object[s] functions
"git rebase" etc. in Git 2.19 fails to abort when given an empty
commit log message as result of editing, which has been corrected.
* en/sequencer-empty-edit-result-aborts:
sequencer: fix --allow-empty-message behavior, make it smarter
Recent update broke the reachability algorithm when refs (e.g.
tags) that point at objects that are not commit were involved,
which has been fixed.
* ds/reachable:
commit-reach: fix memory and flag leaks
commit-reach: properly peel tags
"git add ':(attr:foo)'" is not supported and is supposed to be
rejected while the command line arguments are parsed, but we fail
to reject such a command line upfront.
* nd/attr-pathspec-fix:
add: do not accept pathspec magic 'attr'
Further fix for O_APPEND emulation on Windows
* js/mingw-o-append:
mingw: fix mingw_open_append to work with named pipes
t0051: test GIT_TRACE to a windows named pipe
Fix for a long-standing bug that leaves the index file corrupt when
it shrinks during a partial commit.
* jk/reopen-tempfile-truncate:
reopen_tempfile(): truncate opened file
When fsmonitor is in use, after operation on submodules updates
.gitmodules, we lost track of the fact that we did so and relied on
stale fsmonitor data.
* bp/mv-submodules-with-fsmonitor:
git-mv: allow submodules and fsmonitor to work together
"git rebase -i" did not clear the state files correctly when a run
of "squash/fixup" is aborted and then the user manually amended the
commit instead, which has been corrected.
* js/rebase-i-autosquash-fix:
rebase -i: be careful to wrap up fixup/squash chains
rebase -i --autosquash: demonstrate a problem skipping the last squash
The can_all_from_reach_with_flag() method uses 'assign_flag' as a
value we can use to mark objects temporarily during our commit walk.
The intent is that these flags are removed from all objects before
returning. However, this is not the case.
The 'from' array could also contain objects that are not commits, and
we mark those objects with 'assign_flag'. Add a loop to the 'cleanup'
section that removes these markers.
Also, we forgot to free() the memory for 'list', so add that to the
'cleanup' section.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The can_all_from_reach_with_flag() algorithm was refactored in 4fbcca4e
"commit-reach: make can_all_from_reach... linear" but incorrectly
assumed that all objects provided were commits. During a fetch
negotiation, ok_to_give_up() in upload-pack.c may provide unpeeled tags
to the 'from' array. The current code creates a segfault.
Add a direct call to can_all_from_reach_with_flag() in 'test-tool reach'
and add a test in t6600-test-reach.sh that demonstrates this segfault.
Correct the issue by peeling tags when investigating the initial list
of objects in the 'from' array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b0db704652 (pathspec: allow querying for attributes -
2017-03-13) adds new pathspec magic 'attr' but only with
match_pathspec(). "git add" has some pathspec related code that still
does not know about 'attr' and will bail out:
$ git add ':(attr:foo)'
fatal: BUG:dir.c:1584: unsupported magic 40
A better solution would be making this code support 'attr'. But I
don't know how much work is needed (I'm not familiar with this new
magic). For now, let's simply reject this magic with a friendlier
message:
$ git add ':(attr:foo)'
fatal: :(attr:foo): pathspec magic not supported by this command: 'attr'
Update t6135 so that the expected error message is from the
"graceful" rejection codepath, not "oops, we were supposed to reject
the request to trigger this magic" codepath.
Reported-by: smaudet@sebastianaudet.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rules used by "git push" and "git fetch" to determine if a ref
can or cannot be updated were inconsistent; specifically, fetching
to update existing tags were allowed even though tags are supposed
to be unmoving anchoring points. "git fetch" was taught to forbid
updates to existing tags without the "--force" option.
This is a backward incompatible change but in a good way; it may
still need to be treated carefully.
* ab/fetch-tags-noclobber:
fetch doc: correct grammar in --force docs
push doc: add spacing between two words
"git checkout -b newbranch [HEAD]" should not have to do as much as
checking out a commit different from HEAD. An attempt is made to
optimize this special case.
* bp/checkout-new-branch-optim:
config doc: add missing list separator for checkout.optimizeNewBranch
Correct a grammar error (saying "the receiving" made no sense) in the
recently landed documentation added in my 0bc8d71b99 ("fetch: stop
clobbering existing tags without --force", 2018-08-31) by rephrasing
the sentence. Also correct 'fetching work the same way' by s/work/&s/;
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a formatting error introduced in my recently landed
fe802bd21e ("push doc: correct lies about how push refspecs work",
2018-08-31).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation added in fa655d8411 ("checkout: optimize "git
checkout -b <new_branch>"", 2018-08-16) didn't add the double-colon
needed for the labeled list separator, as a result the added
documentation all got squashed into one paragraph. Fix that by adding
the list separator.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
