A corner case bug where lazily fetching objects from a promisor
remote resulted in infinite recursion has been corrected.
* hx/lookup-commit-in-graph-fix:
t5330: remove run_with_limited_processses()
commit-graph.c: no lazy fetch in lookup_commit_in_graph()
The resolve-undo information in the index was not protected against
GC, which has been corrected.
* jc/resolve-undo:
fsck: do not dereference NULL while checking resolve-undo data
revision: mark blobs needed for resolve-undo as reachable
When the user runs 'git rebase -i --update-refs', the end message still
says only
Successfully rebased and updated <HEAD-ref>.
Update the sequencer to collect the successful (and unsuccessful) ref
updates due to the --update-refs option, so the end message now says
Successfully rebased and updated <HEAD-ref>.
Updated the following refs with --update-refs:
refs/heads/first
refs/heads/third
Failed to update the following refs with --update-refs:
refs/heads/second
To test this output, we need to be very careful to format the expected
error to drop the leading tab characters. Also, we need to be aware that
the verbose output from 'git rebase' is writing progress lines which
don't use traditional newlines but clear the line after every progress
item is complete. When opening the error file in an editor, these lines
are visible, but when looking at the diff in a terminal those lines
disappear because of the characters that delete the previous characters.
Use 'sed' to clear those progress lines and clear the tabs so we can get
an exact match on our expected output.
Reported-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change added the --update-refs command-line option. For
users who always want this mode, create the rebase.updateRefs config
option which behaves the same way as rebase.autoSquash does with the
--autosquash option.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An interactive rebase provides opportunities for the user to edit the
todo list. The --update-refs option initializes the list with some
'update-ref <ref>' steps, but the user could add these manually.
Further, the user could add or remove these steps during pauses in the
interactive rebase.
Add a new method, todo_list_filter_update_refs(), that scans a todo_list
and compares it to the stored update-refs file. There are two actions
that can happen at this point:
1. If a '<ref>/<before>/<after>' triple in the update-refs file does not
have a matching 'update-ref <ref>' command in the todo-list _and_ the
<after> value is the null OID, then remove that triple. Here, the
user removed the 'update-ref <ref>' command before it was executed,
since if it was executed then the <after> value would store the
commit at that position.
2. If a 'update-ref <ref>' command in the todo-list does not have a
matching '<ref>/<before>/<after>' triple in the update-refs file,
then insert a new one. Store the <before> value to be the current
OID pointed at by <ref>. This is handled inside of the
init_update_ref_record() helper method.
We can test that this works by rewriting the todo-list several times in
the course of a rebase. Check that each ref is locked or unlocked for
updates after each todo-list update. We can also verify that the ref
update fails if a concurrent process updates one of the refs after the
rebase process records the "locked" ref location.
To help these tests, add a new 'set_replace_editor' helper that will
replace the todo-list with an exact file.
Reported-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change introduced the 'git rebase --update-refs' option
which added 'update-ref <ref>' commands to the todo list of an
interactive rebase.
Teach Git to record the HEAD position when reaching these 'update-ref'
commands. The ref/before/after triple is stored in the
$GIT_DIR/rebase-merge/update-refs file. A previous change parsed this
file to avoid having other processes updating the refs in that file
while the rebase is in progress.
Not only do we update the file when the sequencer reaches these
'update-ref' commands, we then update the refs themselves at the end of
the rebase sequence. If the rebase is aborted before this final step,
then the refs are not updated. The 'before' value is used to ensure that
we do not accidentally obliterate a ref that was updated concurrently
(say, by an older version of Git or a third-party tool).
Now that the 'git rebase --update-refs' command is implemented to write
to the update-refs file, we can remove the fake construction of the
update-refs file from a test in t2407-worktree-heads.sh.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working on a large feature, it can be helpful to break that feature
into multiple smaller parts that become reviewed in sequence. During
development or during review, a change to one part of the feature could
affect multiple of these parts. An interactive rebase can help adjust
the multi-part "story" of the branch.
However, if there are branches tracking the different parts of the
feature, then rebasing the entire list of commits can create commits not
reachable from those "sub branches". It can take a manual step to update
those branches.
Add a new --update-refs option to 'git rebase -i' that adds 'update-ref
<ref>' steps to the todo file whenever a commit that is being rebased is
decorated with that <ref>. At the very end, the rebase process updates
all of the listed refs to the values stored during the rebase operation.
Be sure to iterate after any squashing or fixups are placed. Update the
branch only after those squashes and fixups are complete. This allows a
--fixup commit at the tip of the feature to apply correctly to the sub
branch, even if it is fixing up the most-recent commit in that part.
This change update the documentation and builtin to accept the
--update-refs option as well as updating the todo file with the
'update-ref' commands. Tests are added to ensure that these todo
commands are added in the correct locations.
This change does _not_ include the actual behavior of tracking the
updated refs and writing the new ref values at the end of the rebase
process. That is deferred to a later change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch_checked_out() helper helps commands like 'git branch' and
'git fetch' from overwriting refs that are currently checked out in
other worktrees.
A future update to 'git rebase' will introduce a new '--update-refs'
option which will update the local refs that point to commits that are
being rebased. To avoid collisions as the rebase completes, we want to
make the future data store for these refs to be considered by
branch_checked_out().
The data store is a plaintext file inside the 'rebase-merge' directory
for that worktree. The file lists refnames followed by two OIDs, each on
separate lines. The OIDs will be used to store the original values of
the refs and the to-be-written values as the rebase progresses, but can
be ignored at the moment.
Create a new sequencer_get_update_refs_state() method that parses this
file and populates a struct string_list with the ref-OID pairs. We can
then use this list to add to the current_checked_out_branches strmap
used by branch_checked_out().
To properly navigate to the rebase directory for a given worktree,
extract the static strbuf_worktree_gitdir() method to a public API
method.
We can test that this works without having Git write this file by
artificially creating one in our test script, at least until 'git rebase
--update-refs' is implemented and we can use it directly.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests in t2407 that verify the branch_checked_out() helper in the
case of bisects and rebases were added by 9347303db89 (branch: check for
bisects and rebases, 2022-06-08). However, that commit failed to check
for rebases that are using the 'apply' backend.
Add a test that checks the apply backend. The implementation was already
correct here, but it is good to have regression tests before modifying
the implementation further.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests added by d2ba271aad (branch: check for bisects and rebases,
2022-06-14) modified hidden state to verify the branch_checked_out()
helper. While this indeed checks that the method implementation is _as
designed_, it doesn't show that it is _correct_. Specifically, if 'git
bisect' or 'git rebase' change their back-end for preserving refs, then
these tests do not demonstrate that drift as a bug in
branch_checked_out().
Modify the tests in t2407 to actually rely on a paused bisect or rebase.
This requires adding the !SANITIZE_LEAK prereq for tests using those
builtins. The logic is still tested for leaks in the final test which
does set up that back-end directly for an error state that should not be
possible using Git commands.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word "whitelist" has cultural implications that are not inclusive.
Thankfully, it is not difficult to reword and avoid its use.
Focus on changes in the test scripts, since most of the changes are in
comments and test names. The renamed test_allow_var helper is only used
once inside the widely-used test_proto helper.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation and error messages for git-cvsserver include some
references to a "whitelist" that is not otherwise included in the
documentation. When different parts of the documentation do not use
common language, this can lead to confusion as to how things are meant
to operate.
Further, the word "whitelist" has cultural implications that make its
use non-inclusive. Thankfully, we can remove it while increasing
clarity.
Update Documentation/git-cvsserver.txt in a similar way to the previous
change to Documentation/git-daemon.txt. The optional '<directory>...'
list can specify a list of allowed directories. We refer to that list
directly inside of the documentation for the GIT_CVSSERVER_ROOT
environment variable.
While modifying this documentation, update the environment variables to
use a list format. We use the modern way of tabbing the description of
each variable in this section. We do _not_ update the description of
'<directory>...' to use tabs this way since the rest of the items in the
OPTIONS list do not use this modern formatting.
A single error message in the actual git-cvsserver.perl code refers to
the whitelist during argument parsing. Instead, refer to the directory
list that has been clarified in the documentation.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes a long-standing corner case bug around directory renames in
the merge-ort strategy.
* en/merge-dual-dir-renames-fix:
merge-ort: fix issue with dual rename and add/add conflict
merge-ort: shuffle the computation and cleanup of potential collisions
merge-ort: make a separate function for freeing struct collisions
merge-ort: small cleanups of check_for_directory_rename
t6423: add tests of dual directory rename plus add/add conflict
Tweak tests so that they still work when the "git init" template
did not create .git/info directory.
* ab/test-without-templates:
tests: don't assume a .git/info for .git/info/sparse-checkout
tests: don't assume a .git/info for .git/info/exclude
tests: don't assume a .git/info for .git/info/refs
tests: don't assume a .git/info for .git/info/attributes
tests: don't assume a .git/info for .git/info/grafts
tests: don't depend on template-created .git/branches
t0008: don't rely on default ".git/info/exclude"
Teach "make all" to build gitweb as well.
* ab/build-gitweb:
gitweb/Makefile: add a "NO_GITWEB" parameter
Makefile: build 'gitweb' in the default target
gitweb/Makefile: include in top-level Makefile
gitweb: remove "test" and "test-installed" targets
gitweb/Makefile: prepare to merge into top-level Makefile
gitweb/Makefile: clear up and de-duplicate the gitweb.{css,js} vars
gitweb/Makefile: add a $(GITWEB_ALL) variable
gitweb/Makefile: define all .PHONY prerequisites inline
git-cat-file is used by tools like GitLab to get commit tag contents
that are then displayed to users. This content which has author,
committer or tagger information, could benefit from passing through the
mailmap mechanism before being sent or displayed.
This patch adds --[no-]use-mailmap command line option to the git
cat-file command. It also adds --[no-]mailmap option as an alias to
--[no-]use-mailmap.
This patch also introduces new test cases to test the mailmap mechanism in
git cat-file command.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While setting up an unresolved merge for `git rerere`, we run `git
rev-parse` and `git fmt-merge-msg` to create a variable `$fifth` and a
commit-message file `msg`, which we then never actually use. This has
been like that since these tests were added in 672d1b789b ("rerere:
migrate to parse-options API", 2010-08-05). This does exercise `git
rev-parse` and `git fmt-merge-msg`, but doesn't contribute to testing
`git rerere`. Drop these lines.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the overly verbose trace2 logging added in 9a4987677d (trace2:
add stats for fsync operations, 2022-03-30) (first released with
v2.36.0).
Since that change every single "git" command invocation has included
these "data" events, even though we'll only make use of these with
core.fsyncMethod=batch, and even then only have non-zero values if
we're writing object data to disk. See c0f4752ed2 (core.fsyncmethod:
batched disk flushes for loose-objects, 2022-04-04) for that feature.
As we're needing to indent the trace2_data_intmax() lines let's
introduce helper variables to ensure that our resulting lines (which
were already too) don't exceed the recommendations of the
CodingGuidelines. Doing that requires either wrapping them twice, or
introducing short throwaway variable names, let's do the latter.
The result was that e.g. "git version" would previously emit a total
of 6 trace2 events with the GIT_TRACE2_EVENT target (version, start,
cmd_ancestry, cmd_name, exit, atexit), but afterwards would emit
8. We'd emit 2 "data" events before the "exit" event.
The reason we didn't catch this was that the trace2 unit tests added
in a15860dca3 (trace2: t/helper/test-trace2, t0210.sh, t0211.sh,
t0212.sh, 2019-02-22) would omit any "data" events that weren't the
ones it cared about. Before this change to the C code 6/7 of our
"t/t0212-trace2-event.sh" tests would fail if this change was applied
to "t/t0212/parse_events.perl".
Let's make the trace2 testing more strict, and further append any new
events types we don't know about in "t/t0212/parse_events.perl". Since
we only invoke the "test-tool trace2" there's no guarantee that we'll
catch other overly verbose events in the future, but we'll at least
notice if we start emitting new events that are issues every time we
log anything with trace2's JSON target.
We exclude the "data_json" event type, we'd otherwise would fail on
both "win test" and "win+VS test" CI due to the logging added in
353d3d77f4 (trace2: collect Windows-specific process information,
2019-02-22). It looks like that logging should really be using
trace2_cmd_ancestry() instead, which was introduced later in
2f732bf15e (tr2: log parent process name, 2021-07-21), but let's
leave it for now.
The fix-up to aaf81223f4 (unpack-objects: use stream_loose_object()
to unpack large objects, 2022-06-11) is needed because we're changing
the behavior of these events as discussed above. Since we'd always
emit a "hardware-flush" event the test added in aaf81223f4 wasn't
testing anything except that this trace2 data was unconditionally
logged. Even if "core.fsyncMethod" wasn't set to "batch" we'd pass the
test.
Now we'll check the expected number of "writeout" v.s. "flush" calls
under "core.fsyncMethod=batch", but note that this doesn't actually
test if we carried out the sync using that method, on a platform where
we'd have to fall back to fsync() each of those "writeout" would
really be a "flush" (i.e. a full fsync()).
But in this case what we're testing is that the logic in
"unpack-objects" behaves as expected, not the OS-specific question of
whether we actually were able to use the "bulk" method.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Build a typed sort function for the mergesort performance test tool
using DEFINE_LIST_SORT instead of calling llist_mergesort(). This gets
rid of the next pointer accessor functions and improves the performance
at the cost of a slightly higher object text size.
Before:
0071.12: llist_mergesort() unsorted 0.24(0.22+0.01)
0071.14: llist_mergesort() sorted 0.12(0.10+0.01)
0071.16: llist_mergesort() reversed 0.12(0.10+0.01)
__TEXT __DATA __OBJC others dec hex
6407 276 0 24701 31384 7a98 t/helper/test-mergesort.o
With this patch:
0071.12: DEFINE_LIST_SORT unsorted 0.22(0.21+0.01)
0071.14: DEFINE_LIST_SORT sorted 0.11(0.10+0.01)
0071.16: DEFINE_LIST_SORT reversed 0.11(0.10+0.01)
__TEXT __DATA __OBJC others dec hex
6615 276 0 25832 32723 7fd3 t/helper/test-mergesort.o
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define a typed sort function using DEFINE_LIST_SORT_DEBUG for the
mergesort sanity check instead of using llist_mergesort(). This gets
rid of the next pointer accessor functions and improves the performance
at the cost of slightly bigger object text.
Before:
Benchmark 1: t/helper/test-tool mergesort test
Time (mean ± σ): 108.4 ms ± 0.2 ms [User: 106.7 ms, System: 1.2 ms]
Range (min … max): 108.0 ms … 108.8 ms 27 runs
__TEXT __DATA __OBJC others dec hex
6251 276 0 23172 29699 7403 t/helper/test-mergesort.o
With this patch:
Benchmark 1: t/helper/test-tool mergesort test
Time (mean ± σ): 94.0 ms ± 0.2 ms [User: 92.4 ms, System: 1.1 ms]
Range (min … max): 93.7 ms … 94.5 ms 31 runs
__TEXT __DATA __OBJC others dec hex
6407 276 0 24701 31384 7a98 t/helper/test-mergesort.o
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git config's tab completion does not yet know about the "include"
and "includeIf" sections, nor the related "path" variable.
Add a description for these two sections in
'Documentation/config/includeif.txt', which points to git-config's
documentation, specifically the "Includes" and "Conditional Includes"
subsections.
As a side effect, tab completion can successfully complete the
'include', 'includeIf', and 'include.add' expressions.
This effect is tested by two new ad-hoc tests.
Variable completion only works for "include" for now.
Credit for the ideas behind this patch goes to
Ævar Arnfjörð Bjarmason.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Manuel Boni <ziosombrero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit demonstrates a bug where a commit-graph using
generation v2 could enter a state where one of the GDA2 values has its
most-significant bit set (indicating that its value should be read from
the extended offset table in the GDO2 chunk) without having a GDO2 chunk
to read from.
This results in the following error message being displayed to the
caller:
fatal: commit-graph requires overflow generation data but has none
This bug arises in the following scenario:
- We decide to write a commit-graph using generation number v2, and
decide (correctly) that no GDO2 chunk is necessary (e.g., because
all of the commiter date offsets are no larger than 2^31-1).
- The v2 generation numbers are stored in the `->generation` member of
the commit slab holding `struct commit_graph_data`'s.
- Later on, `load_commit_graph_info()` is called, overwriting the
v2 generation data in the aforementioned slab with any existing v1
generation data.
Then, when the commit-graph code goes to write the GDA2 chunk via
`write_graph_chunk_generation_data()`, we use the overwritten generation
v1 data in a place where we expect to use a v2 generation number:
offset = commit_graph_data_at(c)->generation - c->date;
...because `commit_graph_data_at(c)->generation` used to hold the v2
generation data, but it was overwritten to contain the v1 generation
number via `load_commit_graph_info()`.
If the `offset` computation above overflows the v2 generation number
max, then `write_graph_chunk_generation_data()` will update its count of
large offsets and write the marker accordingly:
if (offset > GENERATION_NUMBER_V2_OFFSET_MAX) {
offset = CORRECTED_COMMIT_DATE_OFFSET_OVERFLOW | num_generation_data_overflows;
num_generation_data_overflows++;
}
and reads will look for the GDO2 chunk containing the overflowing v2
generation number, *after* the commit-graph code decided that no such
chunk was necessary.
The main problem is that the slab containing `struct commit_graph_data`
has a dual purpose. It is used to hold data that we are about to write
to disk while generating a commit-graph, as well as hold data that was
read from an existing commit-graph.
When the two mix, namely when the result of reading the commit-graph has
a side-effect that mixes poorly with an in-progress commit-graph write,
we end up with corrupt data.
A complete fix might be to introduce a new slab that is used exclusively
for writing, and gate access between the two slabs based on context
provided by the caller (e.g., whether this computation is part of a
"read" or "write" operation).
But a more minimal fix addresses the only known path which overwrites
the slab data, which is `compute_bloom_filters()` ->
`get_or_compute_bloom_filter()` -> `load_commit_graph_info()` ->
`fill_commit_graph_info()` by avoiding the last call which clobbers the
data altogether.
This path only needs to learn the graph position of a given commit so
that it can be used in `load_bloom_filter_from_graph()`. By replacing
the last steps of the above with one that records the graph position
into a temporary variable which is then used to load the existing Bloom
data, we eliminate the clobbering, removing the corruption.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When upgrading a commit-graph using generation v1 to one using
generation v2, it is possible to force Git into a corrupt state where it
(incorrectly) believes that a GDO2 chunk is necessary, *after* deciding
not to write one.
This makes subsequent reads using the commit-graph produce the following
error message:
fatal: commit-graph requires overflow generation data but has none
Demonstrate this bug by increasing our test coverage to include a
minimal example of upgrading a commit-graph from generation v1 to v2.
The only notable components of this test are:
- The committer date of the commit is chosen carefully so that the
offset underflows when computed using a v1 generation number, but
would not overflow when using v2 generation numbers.
- The upgrade to generation number v2 must read in the v1 generation
numbers, which we can do by passing `--changed-paths`, which will
force the commit-graph internals to call `fill_commit_graph_info()`.
A future patch will squash this bug.
Reported-by: Jeff King <peff@peff.net>
Reproduced-by: Will Chandler <wfc@wfchandler.org>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a known social engineering attack that takes advantage of the
fact that a working tree can include an entire bare repository,
including a config file. A user could run a Git command inside the bare
repository thinking that the config file of the 'outer' repository would
be used, but in reality, the bare repository's config file (which is
attacker-controlled) is used, which may result in arbitrary code
execution. See [1] for a fuller description and deeper discussion.
A simple mitigation is to forbid bare repositories unless specified via
`--git-dir` or `GIT_DIR`. In environments that don't use bare
repositories, this would be minimally disruptive.
Create a config variable, `safe.bareRepository`, that tells Git whether
or not to die() when working with a bare repository. This config is an
enum of:
- "all": allow all bare repositories (this is the default)
- "explicit": only allow bare repositories specified via --git-dir
or GIT_DIR.
If we want to protect users from such attacks by default, neither value
will suffice - "all" provides no protection, but "explicit" is
impractical for bare repository users. A more usable default would be to
allow only non-embedded bare repositories ([2] contains one such
proposal), but detecting if a repository is embedded is potentially
non-trivial, so this work is not implemented in this series.
[1]: https://lore.kernel.org/git/kl6lsfqpygsj.fsf@chooglen-macbookpro.roam.corp.google.com
[2]: https://lore.kernel.org/git/5b969c5e-e802-c447-ad25-6acc0b784582@github.com
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use git_protected_config() to read `safe.directory` instead of
read_very_early_config(), making it 'protected configuration only'.
As a result, `safe.directory` now respects "-c", so update the tests and
docs accordingly. It used to ignore "-c" due to how it was implemented,
not because of security or correctness concerns [1].
[1] https://lore.kernel.org/git/xmqqlevabcsu.fsf@gitster.g/
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`uploadpack.packObjectsHook` is the only 'protected configuration only'
variable today, but we've noted that `safe.directory` and the upcoming
`safe.bareRepository` should also be 'protected configuration only'. So,
for consistency, we'd like to have a single implementation for protected
configuration.
The primary constraints are:
1. Reading from protected configuration should be fast. Nearly all "git"
commands inside a bare repository will read both `safe.directory` and
`safe.bareRepository`, so we cannot afford to be slow.
2. Protected configuration must be readable when the gitdir is not
known. `safe.directory` and `safe.bareRepository` both affect
repository discovery and the gitdir is not known at that point [1].
The chosen implementation in this commit is to read protected
configuration and cache the values in a global configset. This is
similar to the caching behavior we get with the_repository->config.
Introduce git_protected_config(), which reads protected configuration
and caches them in the global configset protected_config. Then, refactor
`uploadpack.packObjectsHook` to use git_protected_config().
The protected configuration functions are named similarly to their
non-protected counterparts, e.g. git_protected_config_check_init() vs
git_config_check_init().
In light of constraint 1, this implementation can still be improved.
git_protected_config() iterates through every variable in
protected_config, which is wasteful, but it makes the conversion simple
because it matches existing patterns. We will likely implement constant
time lookup functions for protected configuration in a future series
(such functions already exist for non-protected configuration, i.e.
repo_config_get_*()).
An alternative that avoids introducing another configset is to continue
to read all config using git_config(), but only accept values that have
the correct config scope [2]. This technically fulfills constraint 2,
because git_config() simply ignores the local and worktree config when
the gitdir is not known. However, this would read incomplete config into
the_repository->config, which would need to be reset when the gitdir is
known and git_config() needs to read the local and worktree config.
Resetting the_repository->config might be reasonable while we only have
these 'protected configuration only' variables, but it's not clear
whether this extends well to future variables.
[1] In this case, we do have a candidate gitdir though, so with a little
refactoring, it might be possible to provide a gitdir.
[2] This is how `uploadpack.packObjectsHook` was implemented prior to
this commit.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further preparation to turn git-submodule.sh into a builtin.
* ab/submodule-cleanup:
git-sh-setup.sh: remove "say" function, change last users
git-submodule.sh: use "$quiet", not "$GIT_QUIET"
submodule--helper: eliminate internal "--update" option
submodule--helper: understand --checkout, --merge and --rebase synonyms
submodule--helper: report "submodule" as our name in some "-h" output
submodule--helper: rename "absorb-git-dirs" to "absorbgitdirs"
submodule update: remove "-v" option
submodule--helper: have --require-init imply --init
git-submodule.sh: remove unused top-level "--branch" argument
git-submodule.sh: make the "$cached" variable a boolean
git-submodule.sh: remove unused $prefix variable
git-submodule.sh: remove unused sanitize_submodule_env()
"git mv A B" in a sparsely populated working tree can be asked to
move a path between directories that are "in cone" (i.e. expected
to be materialized in the working tree) and "out of cone"
(i.e. expected to be hidden). The handling of such cases has been
improved.
* sy/mv-out-of-cone:
mv: add check_dir_in_index() and solve general dir check issue
mv: use flags mode for update_mode
mv: check if <destination> exists in index to handle overwriting
mv: check if out-of-cone file exists in index with SKIP_WORKTREE bit
mv: decouple if/else-if checks using goto
mv: update sparsity after moving from out-of-cone to in-cone
t1092: mv directory from out-of-cone to in-cone
t7002: add tests for moving out-of-cone file/directory
Allow large objects read from a packstream to be streamed into a
loose object file straight, without having to keep it in-core as a
whole.
* hx/unpack-streaming:
unpack-objects: use stream_loose_object() to unpack large objects
core doc: modernize core.bigFileThreshold documentation
object-file.c: add "stream_loose_object()" to handle large object
object-file.c: factor out deflate part of write_loose_object()
object-file.c: refactor write_loose_object() to several steps
unpack-objects: low memory footprint for get_data() in dry_run mode
"git merge-tree" learned a new mode where it takes two commits and
computes a tree that would result in the merge commit, if the
histories leading to these two commits were to be merged.
* en/merge-tree:
git-merge-tree.txt: add a section on potentional usage mistakes
merge-tree: add a --allow-unrelated-histories flag
merge-tree: allow `ls-files -u` style info to be NUL terminated
merge-ort: optionally produce machine-readable output
merge-ort: store more specific conflict information
merge-ort: make `path_messages` a strmap to a string_list
merge-ort: store messages in a list, not in a single strbuf
merge-tree: provide easy access to `ls-files -u` style info
merge-tree: provide a list of which files have conflicts
merge-ort: remove command-line-centric submodule message from merge-ort
merge-ort: provide a merge_get_conflicted_files() helper function
merge-tree: support including merge messages in output
merge-ort: split out a separate display_update_messages() function
merge-tree: implement real merges
merge-tree: add option parsing and initial shell for real merge function
merge-tree: move logic for existing merge into new function
merge-tree: rename merge_trees() to trivial_merge_trees()
In a non-bare repository, the behavior of Git when the
core.worktree configuration variable points at a directory that has
a repository as its subdirectory, regressed in Git 2.27 days.
* gg/worktree-from-the-above:
dir: minor refactoring / clean-up
dir: traverse into repository
At the end of `git checkout <pathspec>`, we get a message informing how
many entries were updated in the working tree. However, this number can
be inaccurate for two reasons:
1) Delayed entries currently get counted twice.
2) Failed entries are included in the count.
The first problem happens because the counter is first incremented
before inserting the entry in the delayed checkout queue, and once again
when finish_delayed_checkout() calls checkout_entry(). And the second
happens because the counter is incremented too early in
checkout_entry(), before the entry was in fact checked out. Fix that by
moving the count increment further down in the call stack and removing
the duplicate increment on delayed entries. Note that we have to keep
a per-entry reference for the counter (both on parallel checkout and
delayed checkout) because not all entries are always accumulated at the
same counter. See checkout_worktree(), at builtin/checkout.c for an
example.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After checkout, git usually reports how many entries were updated at
that operation. However, because we count the entries too soon during
the checkout process, we may actually include entries that do not get
properly checked out in the end. This can lead to an inaccurate final
report if the user expects it to show only the *successful* updates.
This will be fixed in the next commit, but for now let's document it
with a test that cover all checkout modes.
Note that `test_checkout_workers` have to be slightly adjusted in order
to use the construct `test_checkout_workers ... test_must_fail git
checkout`. The function runs the command given to it with an assignment
prefix to set the GIT_TRACE2 variable. However, this this assignment has
an undefined behavior when the command is a shell function (like
`test_must_fail`). As POSIX specifies:
If the command name is a function that is not a standard utility
implemented as a function, variable assignments shall affect the
current execution environment during the execution of the function. It
is unspecified:
- Whether or not the variable assignments persist after the
completion of the function
- Whether or not the variables gain the export attribute during the
execution of the function
Thus, in order to make sure the GIT_TRACE2 value gets visible to the git
command executed by `test_must_fail`, export the variable and run git in
a subshell.
[1]: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html
(Vol. 3: Shell and Utilities, Section 2.9.1: Simple Commands)
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the end of a `git checkout <pathspec>` operation, git reports how
many paths were checked out with a message like "Updated N paths from
the index". However, entries that end up on the delayed checkout queue
(as requested by a long-running process filter) get counted twice,
producing a wrong number in the final report. We will fix this bug in an
upcoming commit. For now, only document/demonstrate it with a
test_expect_failure.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 78d5e4cfb4 (tests: refactor --write-junit-xml code, 2022-05-21),
this developer refactored the `--write-junit-xml` code a bit, including
the part where the current test case's title was used in a `set`
invocation, but failed to account for the fact that some test cases'
titles start with a long option, which the `set` misinterprets as being
intended for parsing.
Let's fix this by using the `set -- <...>` form.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" sometimes perform poorly when reachability bitmaps are
used, even in a repository where other operations are helped by
bitmaps. The push.useBitmaps configuration variable is introduced
to allow disabling use of reachability bitmaps only for "git push".
* zk/push-use-bitmaps:
send-pack.c: add config push.useBitmaps
"git remote show [-n] frotz" now pays attention to negative
pathspec.
* jk/remote-show-with-negative-refspecs:
remote: handle negative refspecs in git remote show
Fixes for tests when the source directory has unusual characters in
its path, e.g. whitespaces, double-quotes, etc.
* ab/test-quoting-fix:
config tests: fix harmless but broken "rm -r" cleanup
test-lib.sh: fix prepend_var() quoting issue
tests: add missing double quotes to included library paths
* ds/branch-checked-out:
branch: drop unused worktrees variable
fetch: stop passing around unused worktrees variable
branch: fix branch_checked_out() leaks
branch: use branch_checked_out() when deleting refs
fetch: use new branch_checked_out() and add tests
branch: check for bisects and rebases
branch: add branch_checked_out() helper
run_with_limited_processses() is used to end the loop faster when an
infinite loop happen. But "ulimit" is tied to the entire development
station, and the test will fail due to too many other processes or using
"--stress".
Without run_with_limited_processses() the infinite loop can also be
stopped due to global configrations or quotas, and the verification
still works fine. So let's remove run_with_limited_processses().
Signed-off-by: Han Xin <hanxin.hx@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git archive" to (optionally and then by default) avoid
spawning an external "gzip" process when creating ".tar.gz" (and
".tgz") archives.
* rs/archive-with-internal-gzip:
archive-tar: use internal gzip by default
archive-tar: use OS_CODE 3 (Unix) for internal gzip
archive-tar: add internal gzip implementation
archive-tar: factor out write_block()
archive: rename archiver data field to filter_command
archive: update format documentation
Introduce a helper to see if a branch is already being worked on
(hence should not be newly checked out in a working tree), which
performs much better than the existing find_shared_symref() to
replace many uses of the latter.
* ds/branch-checked-out:
branch: drop unused worktrees variable
fetch: stop passing around unused worktrees variable
branch: fix branch_checked_out() leaks
branch: use branch_checked_out() when deleting refs
fetch: use new branch_checked_out() and add tests
branch: check for bisects and rebases
branch: add branch_checked_out() helper
Git server end's ability to accept Accept-Language header was introduced
in f18604bbf2 (http: add Accept-Language header if possible, 2015-01-28),
but this is only used by very early phase of the transfer, which is HTTP
GET request to discover references. For other phases, like POST request
in the smart HTTP, the server does not know what language the client
speaks.
Teach git client to learn end-user's preferred language and throw
accept-language header to the server side. Once the server gets this header,
it has the ability to talk to end-user with language they understand.
This would be very helpful for many non-English speakers.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Li Linchao <lilinchao@oschina.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually clone tries to use the same local HEAD as the remote (unless the
user has given --branch explicitly). Even if the remote HEAD is detached
or unborn, we can detect those situations with modern versions of Git.
If the remote is too old to support the "unborn" extension (or it has
been disabled via config), then we can't know the name of the remote's
unborn HEAD, and we fall back whatever the local default branch name is
configured to be.
But that leads to one weird corner case. It's rare because it needs a
number of factors:
- the remote has an unborn HEAD
- the remote is too old to support "unborn", or has disabled it
- the remote has another branch "foo"
- the local default branch name is "foo"
In that case you end up with a local clone on an unborn "foo" branch,
disconnected completely from the remote's "foo". This is rare in
practice, but the result is quite confusing.
When choosing "foo", we can double check whether the remote has such a
name, and if so, start our local "foo" at the same spot, rather than
making it unborn.
Note that this causes a test failure in t5605, which is cloning from a
bundle that doesn't contain HEAD (so it behaves like a remote that
doesn't support "unborn"), but has a single "main" branch. That test
expects that we end up in the weird "unborn main" case, where we don't
actually check out the remote branch of the same name. Even though we
have to update the test, this seems like an argument in favor of this
patch: checking out main is what I'd expect from such a bundle.
So this patch updates the test for the new behavior and adds an adjacent
one that checks what the original was going for: if there's no HEAD and
the bundle _doesn't_ have a branch that matches our local default name,
then we end up with nothing checked out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless "--branch" was given, clone generally tries to match the local
HEAD to the remote one. For most repositories, this is easy: the remote
tells us which branch HEAD was pointing to, and we call our local
checkout() function on that branch.
When cloning an empty repository, it's a little more tricky: we have
special code that checks the transport's "unborn" extension, or falls back
to our local idea of what the default branch should be. In either case,
we point the new HEAD to that, and set up the branch.* config.
But that leaves one case unhandled: when the remote repository _isn't_
empty, but its HEAD is unborn. The checkout() function is smart enough
to realize we didn't fetch the remote HEAD and it bails with a warning.
But we'll have ignored any information the remote gave us via the unborn
extension. This leads to nonsense outcomes:
- If the remote has its HEAD pointing to an unborn "foo" and contains
another branch "bar", cloning will get branch "bar" but leave the
local HEAD pointing at "master" (or whatever our local default is),
which is useless. The project does not use "master" as a branch.
- Worse, if the other branch "bar" is instead called "master" (but
again, the remote HEAD is not pointing to it), then we end up with a
local unborn branch "master", which is not connected to the remote
"master" (it shares no history, and there's no branch.* config).
Instead, we should try to use the remote's HEAD, even if its unborn, to
be consistent with the other cases.
The reason this case was missed is that cmd_clone() handles empty and
non-empty repositories on two different sides of a conditional:
if (we have any refs) {
fetch refs;
check for --branch;
otherwise, try to point our head at remote head;
otherwise, our head is NULL;
} else {
check for --branch;
otherwise, try to use "unborn" extension;
otherwise, fall back to our default name name;
}
So the smallest change would be to repeat the "unborn" logic at the end
of the first block. But we can note some other overlaps and
inconsistencies:
- both sides have to handle --branch (though note that it's always an
error for the empty repo case, since an empty repo by definition
does not have a matching branch)
- the fall back to the default name is much more explicit in the
empty-repo case. The non-empty case eventually ends up bailing
from checkout() with a warning, which produces a similar result, but
fails to set up the branch config we do in the empty case.
So let's pull the HEAD setup out of this conditional entirely. This
de-duplicates some of the code and the result is easy to follow, because
helper functions like find_ref_by_name() do the right thing even in the
empty-repo case (i.e., by returning NULL).
There are two subtleties:
- for a remote with a detached HEAD, it will advertise an oid for HEAD
(which we store in our "remote_head" variable), but we won't find a
matching refname (so our "remote_head_points_at" is NULL). In this
case we make a local detached HEAD to match. Right now this happens
implicitly by reaching update_head() with a non-NULL remote_head
(since we skip all of the unborn-fallback). We'll now need to
account for it explicitly before doing the fallback.
- for an empty repo, we issue a warning to the user that they've
cloned an empty repo. The text of that warning doesn't make sense
for a non-empty repo with an unborn HEAD, so we'll have to
differentiate the two cases there. We could just use different text,
but instead let's allow the code to continue down to checkout(),
which will issue an appropriate warning, like:
remote HEAD refers to nonexistent ref, unable to checkout
Continuing down to checkout() will make it easier to do more fixes
on top (see below).
Note that this patch fixes the case where the other side reports an
unborn head to us using the protocol extension. It _doesn't_ fix the
case where the other side doesn't tell us, we locally guess "master",
and the other side happens to have a "master" which its HEAD doesn't
point. But it doesn't make anything worse there, and it should actually
make it easier to fix that problem on top.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update test style in t/t30[*].sh for uniformity, that's to
keep test title the same line with helper function itself,
and fix some indentions.
Add a new section "recommended style" in t/README to
encourage people to use more modern style in test.
Signed-off-by: Li Linchao <lilinchao@oschina.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is code in both merge-recursive and merge-ort for avoiding doubly
transitive renames (i.e. one side renames directory A/ -> B/, and the
other side renames directory B/ -> C/), because this combination would
otherwise make a mess for new files added to A/ on the first side and
wondering which directory they end up in -- especially if there were
even more renames such as the first side renaming C/ -> D/. In such
cases, it just turns "off" directory rename detection for the higher
order transitive cases.
The testcases added in t6423 a couple commits ago are slightly different
but similar in principle. They involve a similar case of paired
renaming but instead of A/ -> B/ and B/ -> C/, the second side renames
a leading directory of B/ to C/. And both sides add a new file
somewhere under the directory that the other side will rename. While
the new files added start within different directories and thus could
logically end up within different directories, it is weird for a file
on one side to end up where the other one started and not move along
with it. So, let's just turn off directory rename detection in this
case as well.
Another way to look at this is that if the source name involved in a
directory rename on one side is the target name of a directory rename
operation for a file from the other side, then we avoid the doubly
transitive rename. (More concretely, if a directory rename on side D
wants to rename a file on side E from OLD_NAME -> NEW_NAME, and side D
already had a file named NEW_NAME, and a directory rename on side E
wants to rename side D's NEW_NAME -> NEWER_NAME, then we turn off the
directory rename detection for NEW_NAME to prevent the
NEW_NAME -> NEWER_NAME rename, and instead end up with an add/add
conflict on NEW_NAME.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an attempt at minimalizing a testcase reported by Glen Choo
with tensorflow where merge-ort would report an assertion failure:
Assertion failed: (ci->filemask == 2 || ci->filemask == 4), function apply_directory_rename_modifications, file merge-ort.c, line 2410
reversing the direction of the merge provides a different error:
error: cache entry has null sha1: ...
fatal: unable to write .git/index
so we add testcases for both. With these new testcases, the
recursive strategy differs in that it returns the latter error for
both merge directions.
These testcases are somehow a little different than Glen's original
tensorflow testcase in that these ones trigger a bug with the recursive
algorithm whereas his testcase didn't. I figure that means these
testcases somehow manage to be more comprehensive.
Reported-by: Glen Choo <chooglen@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite of "git add -i" in C that appeared in Git 2.25 didn't
correctly record a removed file to the index, which is an old
regression but has become widely known because the C version
has become the default in the latest release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite of "git add -i" in C that appeared in Git 2.25 didn't
correctly record a removed file to the index, which was fixed.
* js/add-i-delete:
add --interactive: allow `update` to stage deleted files
Originally, moving a <source> directory which is not on-disk due
to its existence outside of sparse-checkout cone, "giv mv" command
errors out with "bad source".
Add a helper check_dir_in_index() function to see if a directory
name exists in the index. Also add a SKIP_WORKTREE_DIR bit to mark
such directories.
Change the checking logic, so that such <source> directory makes
"giv mv" command warns with "advise_on_updating_sparse_paths()"
instead of "bad source"; also user now can supply a "--sparse" flag so
this operation can be carried out successfully.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving a sparse file into cone can result in unwarned
overwrite of existing entry. The expected behavior is that if the
<destination> exists in the entry, user should be prompted to supply
a [-f|--force] to carry out the operation, or the operation should
fail.
Add a check mechanism to do that.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving a <source> file which is not on-disk but exists in
index as a SKIP_WORKTREE enabled cache entry, "giv mv" command errors
out with "bad source".
Change the checking logic, so that such <source>
file makes "giv mv" command warns with "advise_on_updating_sparse_paths()"
instead of "bad source"; also user now can supply a "--sparse" flag so
this operation can be carried out successfully.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test for "mv: add check_dir_in_index() and solve general dir check
issue" in this series.
This change tests the following:
1. mv <source> as a directory on the sparse index boundary (where it
would be a sparse directory in a sparse index).
2. mv <source> as a directory which is deeper than the boundary (so
the sparse index would expand in the cache_name_pos() method).
These tests can be written now for correctness, but later the first case
can be updated to use the 'ensure_not_expanded' helper in t1092.
Suggested-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add corresponding tests to test following situations:
We do not have sufficient coverage of moving files outside
of a sparse-checkout cone. Create new tests covering this
behavior, keeping in mind that the user can include --sparse
(or not), move a file or directory, and the destination can
already exist in the index (in this case user can use --force
to overwrite existing entry).
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in a310d43494 ([PATCH] Deltification
library work by Nicolas Pitre., 2005-05-19), as a result we can mark
another test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in fa099d2322 (worktree.c: kill
parse_ref() in favor of refs_resolve_ref_unsafe(), 2017-04-24), as a
result we can mark another test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix memory leaks introduced with these tests in f1294eaf7f (bloom.c:
introduce core Bloom filter constructs, 2020-03-30), as a result we
can mark almost the entirety of t0095-bloom.sh as passing with
SANITIZE=leak using "TEST_PASSES_SANITIZE_LEAK=true", there's still an
unrelated memory leak in "git commit" in one of the tests, let's skip
that one under SANITIZE_LEAK for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix memory leaks introduced with these tests in
75459410ed (json_writer: new routines to create JSON data,
2018-07-13), as a result we can mark a test as passing with
SANITIZE=leak using "TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix memory leaks in "test-tool regex" which have been there since
c91841594c (test-regex: Add a test to check for a bug in the regex
routines, 2012-09-01), as a result we can mark a test as passing with
SANITIZE=leak using "TEST_PASSES_SANITIZE_LEAK=true".
We could regfree() on the die() paths here, which would make some
invocations of valgrind(1) happy, but let's just target SANITIZE=leak
for now. Variables that are still reachable when we die() are not
reported as leaks.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "test-tool urlmatch-normalization", as a result
we can mark the corresponding test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix memory leaks in two test-tools used by t0090-cache-tree.sh. As a
result we can mark the test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "test-tool path-utils", as a result we can mark
the corresponding test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "test-tool test-hash" which has been there since
b57cbbf8a8 (test-sha1: test hashing large buffer, 2006-06-24), as a
result we can mark more tests as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in 44c175c7a4 (pull: error on no merge
candidates, 2015-06-18). As a result we can mark several tests as
passing with SANITIZE=leak using "TEST_PASSES_SANITIZE_LEAK=true".
Removing the "int ret = 0" assignment added here in a6d7eb2c7a (pull:
optionally rebase submodules (remote submodule changes only),
2017-06-23) is not a logic error, it could always have been left
uninitialized (as "int ret"), now that we'll use the "ret" from the
upper scope we can drop the assignment in the "opt_rebase" branch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak where "cat-file" will leak the "path" member. See
e5fba602e5 (textconv: support for cat_file, 2010-06-15) for the code
that introduced the offending get_oid_with_context() call (called
get_sha1_with_context() at the time).
As a result we can mark several tests as passing with SANITIZE=leak
using "TEST_PASSES_SANITIZE_LEAK=true".
As noted in dc944b65f1 (get_sha1_with_context: dynamically allocate
oc->path, 2017-05-19) callers must free the "path" member. That same
commit added the relevant free() to this function, but we weren't
catching cases where we'd return early.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "merge-file", we need to loop over the "mmfs"
array and free() what we've got so far when we error out. As a result
we can mark a test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "git check-ref-format" that's been present in the
code in one form or another since 38eedc634b (git check-ref-format
--print, 2009-10-12), the code got substantially refactored in
cfbe22f03f (check-ref-format: handle subcommands in separate
functions, 2010-08-05).
As a result we can mark a test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test had a line reading
! test_file_is_empty actual
which was meant to be
! test_must_be_empty actual
The test worked despite the error, because even though
test_file_is_empty is a non-existent function, the '!' negated the
return value and made it pass. It'd be better to avoid the negation,
so something like
test_file_not_empty actual
would be better, but perhaps it makes even more sense to specify the
number of lines of expected output to make the test a bit tighter.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Elijah Newren <newren@palantir.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph is used to opportunistically optimize accesses to
certain pieces of information on commit objects, and
lookup_commit_in_graph() tries to say "no" when the requested commit
does not locally exist by returning NULL, in which case the caller
can ask for (which may result in on-demand fetching from a promisor
remote) and parse the commit object itself.
However, it uses a wrong helper, repo_has_object_file(), to do so.
This helper not only checks if an object is mmediately available in
the local object store, but also tries to fetch from a promisor remote.
But the fetch machinery calls lookup_commit_in_graph(), thus causing an
infinite loop.
We should make lookup_commit_in_graph() expect that a commit given to it
can be legitimately missing from the local object store, by using the
has_object_file() helper instead.
Signed-off-by: Han Xin <hanxin.hx@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two locations in prepare_to_clone_next_submodule() that
manually calculate the submodule display path, but should just use
do_get_submodule_displaypath() for consistency.
Do this replacement and reorder the code slightly to avoid computing
the display path twice.
Until the preceding commit this code had never been tested, with our
newly added tests we can see that both these sites have been computing
the display path incorrectly ever since they were introduced in
48308681b0 (git submodule update: have a dedicated helper for cloning,
2016-02-29) [1]:
- The first hunk puts a "/" between recursive_prefix and ce->name, but
recursive_prefix already ends with "/".
- The second hunk calls relative_path() on recursive_prefix and
ce->name, but relative_path() only makes sense when both paths share
the same base directory. This is never the case here:
- recursive_prefix is the path from the topmost superproject to the
current submodule
- ce->name is the path from the root of the current submodule to its
submodule.
so, e.g. recursive_prefix="super" and ce->name="submodule" produces
displayname="../super" instead of "super/submodule".
[1] I verified this by applying the tests to 48308681b0.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two locations in prepare_to_clone_next_submodule() that
manually calculate the submodule display path. As discussed in the
next commit the "Skipping" output isn't exactly what we want, but
let's test how we behave now, before changing the existing behavior.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "test_when_finished" cleanup phase added in 4179b4897f (config:
allow overriding of global and system configuration, 2021-04-19) has
never worked as intended, firstly the ".config/git" is a directory, so
we'd need the "-r" flag, but more importantly the $HOME variable
wasn't properly quoted.
We'd thus end up trying to remove the "trash" part of "trash
directory", which wouldn't fail with "-f", since "rm -f" won't fail on
non-existing files.
It's possible that this would have caused an actual failure if someone
had a $HOME with a space character in it, such that our "rm -f" would
fail to remove an existing directory, but in practice that probably
never happened.
Let's fix both the quoting issue, and the other issue cleanup issue in
4179b4897f, which is that we were attempting to clean up
~/.config/git, but weren't cleaing up ~/.gitconfig.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a quoting issue in the function introduced in
b9638d7286 (test-lib: make $GIT_BUILD_DIR an absolute path,
2022-02-27), running the test suite where the git checkout was on a
path with e.g. a space in it would fail.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix inclusion errors which would occur if the $TEST_DIRECTORY had $IFS
whitespace in it.
See d42bab442d (core.fsyncmethod: tests for batch mode, 2022-04-04)
and a242c150eb (vimdiff: integrate layout tests in the unit tests
framework ('t' folder), 2022-03-30) for the two relevant commits. Both
were first released with v2.37.0-rc0 (and were also part of v2.37.0).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scripted version of `git add -i` used `git update-index --add
--remove`, but the built-in version implemented only the `--add` part.
This fixes https://github.com/msys2/MSYS2-packages/issues/3066
Reported-by: Christoph Reiter <reiter.christoph@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the special "test" targets for gitweb added in
958a846721 (gitweb/Makefile: Add 'test' and 'test-installed' targets,
2010-09-26). Unlike e.g. "contrib/scalar" and "contrib/subtree" the
"gitweb" tests themselves live in our top-level t/ directory.
It therefore doesn't make sense to maintain this indirection, no more
than it would to have a "git-send-email-test". By dropping it we'll
also free other tests to use the t95*.sh prefix.
These removed targets are unlikely to be used by anyone, and to the
extent that they are we can easily use an invocation like this
instead:
make test T='t[0-9]*gitweb*.sh'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e84c3cf3dc (git-submodule.sh: accept verbose flag in cmd_update to
be non-quiet, 2018-08-14) the "git submodule update" sub-command was
made to understand "-v", but the option was never documented.
The only in-tree user has been this test added in
3ad0401e9e (submodule update: silence underlying merge/rebase with
"--quiet", 2020-09-30), it wasn't per-se testing --quiet, but fixing a
bug in e84c3cf3dc: It used to set "GIT_QUIET=0" instead of unsetting
it on "-v", and thus we'd end up passing "--quiet" to "git
submodule--helper" on "-v", since the "--quiet" option was passed
using the ${parameter:+word} construct.
Furthermore, even if someone had used the "-v" option they'd only be
getting the default output. Our default in both git-submodule.sh and
"git submodule--helper" has been to be "verbose", so the only way this
option could have matter is if it were used as e.g.:
git submodule --quiet update -v [...]
I.e. to undo the effect of a previous "--quiet" on the command-line.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.35:
Git 2.35.4
Git 2.34.4
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.34:
Git 2.34.4
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.33:
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.32:
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.31:
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.30:
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
Folks may want to merge histories that have no common ancestry; provide
a flag with the same name as used by `git merge` to allow this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much as `git ls-files` has a -z option, let's add one to merge-tree so
that the conflict-info section can be NUL terminated (and avoid quoting
of unusual filenames).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much like `git merge` updates the index with information of the form
(mode, oid, stage, name)
provide this output for conflicted files for merge-tree as well.
Provide a --name-only option for users to exclude the mode, oid, and
stage and only get the list of conflicted filenames.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of `git merge-tree --write-tree` will often want to know which
files had conflicts. While they could potentially attempt to parse the
CONFLICT notices printed, those messages are not meant to be machine
readable. Provide a simpler mechanism of just printing the files (in
the same format as `git ls-files` with quoting, but restricted to
unmerged files) in the output before the free-form messages.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was one case in merge-ort that would call path_msg() multiple
times for the same logical conflict, and it was in order to give advice
about how to resolve a conflict. This advice does not make as much
sense with remerge-diff, or with merge-tree being invoked by a GitHub
GUI for resolution of messages, and is making it hard to provide
which-logical-conflict-affects-which-paths information in a machine
parseable way to a higher level caller of merge-tree. Let's simply
remove this informational message.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running `git merge-tree --write-tree`, we previously would only
return an exit status reflecting the cleanness of a merge, and print out
the toplevel tree of the resulting merge. Merges also have
informational messages, such as:
* "Auto-merging <PATH>"
* "CONFLICT (content): ..."
* "CONFLICT (file/directory)"
* etc.
In fact, when non-content conflicts occur (such as file/directory,
modify/delete, add/add with differing modes, rename/rename (1to2),
etc.), these informational messages may be the only notification the
user gets since these conflicts are not representable in the contents
of the file.
Add a --[no-]messages option so that callers can request these messages
be included at the end of the output. Include such messages by default
when there are conflicts, and omit them by default when the merge is
clean.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the ability to perform real merges rather than just trivial
merges (meaning handling three way content merges, recursive ancestor
consolidation, renames, proper directory/file conflict handling, and so
forth). However, unlike `git merge`, the working tree and index are
left alone and no branch is updated.
The only output is:
- the toplevel resulting tree printed on stdout
- exit status of 0 (clean), 1 (conflicts present), anything else
(merge could not be performed; unknown if clean or conflicted)
This output is meant to be used by some higher level script, perhaps in
a sequence of steps like this:
NEWTREE=$(git merge-tree --write-tree $BRANCH1 $BRANCH2)
test $? -eq 0 || die "There were conflicts..."
NEWCOMMIT=$(git commit-tree $NEWTREE -p $BRANCH1 -p $BRANCH2)
git update-ref $BRANCH1 $NEWCOMMIT
Note that higher level scripts may also want to access the
conflict/warning messages normally output during a merge, or have quick
access to a list of files with conflicts. That is not available in this
preliminary implementation, but subsequent commits will add that
ability (meaning that NEWTREE would be a lot more than a tree in the
case of conflicts).
This also marks the traditional trivial merge of merge-tree as
deprecated. The trivial merge not only had limited applicability, the
output format was also difficult to work with (and its format
undocumented), and will generally be less performant than real merges.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds a command line option analogous to that of GNU
grep(1)'s -m / --max-count, which users might already be used to.
This makes it possible to limit the amount of matches shown in the
output while keeping the functionality of other options such as -C
(show code context) or -p (show containing function), which would be
difficult to do with a shell pipeline (e.g. head(1)).
Signed-off-by: Carlos López 00xc@protonmail.com
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 8d92fb2927 (dir: replace exponential algorithm with a linear one,
2020-04-01) traversing into a repository's directory tree when the
traversal began outside the repository's standard location has failed
because the encountered repository was identified as a nested foreign
repository.
Prior to this commit, the failure to traverse into a repository's
default worktree location was observable from a user's perspective under
either of the following conditions (there may be others):
1) Set the `core.worktree` location to a parent directory of the
default worktree; or
2) Use the `--git_dir` option while the working directory is outside
the repository's default worktree location
Under either of these conditions, symptoms of the failure to traverse
into the repository's default worktree location include the inability to
add files to the index or get a list of untracked files via ls-files.
This commit adds a check to determine whether a nested repository that
is encountered in recursing a path is actually `the_repository`. If so,
we simply treat the directory as if it doesn't contain a nested
repository.
The commit includes test-cases to reduce the likelihood of future
regressions.
Signed-off-by: Goss Geppert <ggossdev@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The many test_configured_prune tests in t5510-fetch.sh test many
combinations of --prune, --prune-tags, and using 'origin' or an explicit
URL. Some machinery was introduced in e1790f9245 (fetch tests: fetch
<url> <spec> as well as fetch [<remote>], 2018-02-09) to replace
'origin' with this explicit URL. This URL is a "file:///" URL for the
root of the $TRASH_DIRECTORY.
However, if the current build tree has an '@' symbol, the
replacement using perl fails. It drops the '@' as well as anything
else in that directory name. You can observe this locally by
cloning git.git into a "victim@03" directory and running the test
script.
As we are writing in Perl anyway, pass in the shell variables involved
to the script as arguments and perform necessary string transformations
inside it, instead of assuming that it is sufficient to enclose the
$remote_url variable inside a pair of single quotes.
Reported-by: Randall Becker <rsbecker@nexbridge.com>
Original-patch-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bash command line prompt (in contrib/) update.
* jp/prompt-clear-before-upstream-mark:
git-prompt: fix expansion of branch colour codes
git-prompt: make colourization consistent
"sudo git foo" used to consider a repository owned by the original
user a safe one to access; it now also considers a repository owned
by root a safe one, too (after all, if an attacker can craft a
malicious repository owned by root, the box is 0wned already).
* cb/path-owner-check-with-sudo-plus:
git-compat-util: allow root to access both SUDO_UID and root owned
Reachability bitmaps are designed to speed up the "counting objects"
phase of generating a pack during a clone or fetch. They are not
optimized for Git clients sending a small topic branch via "git push".
In some cases (see [1]), using reachability bitmaps during "git push"
can cause significant performance regressions.
Add a new "push.useBitmaps" configuration variable to allow users to
tell "git push" not to use bitmaps. We already have "pack.bitmaps"
that controls the use of bitmaps, but a separate configuration variable
allows the reachability bitmaps to still be used in other areas,
such as "git upload-pack", while disabling it only for "git push".
[1]: https://lore.kernel.org/git/87zhoz8b9o.fsf@evledraar.gmail.com/
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous changes introduced a regression which will prevent root for
accessing repositories owned by thyself if using sudo because SUDO_UID
takes precedence.
Loosen that restriction by allowing root to access repositories owned
by both uid by default and without having to add a safe.directory
exception.
A previous workaround that was documented in the tests is no longer
needed so it has been removed together with its specially crafted
prerequisite.
Helped-by: Johanness Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename fetch.credentialsInUrl to transfer.credentialsInUrl as the
single configuration variable should work both in pushing and
fetching.
* ab/credentials-in-url-more:
transfer doc: move fetch.credentialsInUrl to "transfer" config namespace
fetch doc: note "pushurl" caveat about "credentialsInUrl", elaborate
Improve test coverage with a handful of tests.
* ds/more-test-coverage:
cache-tree: remove cache_tree_find_path()
pack-write: drop always-NULL parameter
t5329: test 'git gc --cruft' without '--prune=now'
t2107: test 'git update-index --verbose'
By default, the git remote show command will query data from remotes to
show data about what might be done on a future git fetch. This process
currently does not handle negative refspecs. This can be confusing,
because the show command will list refs as if they would be fetched. For
example if the fetch refspec "^refs/heads/pr/*", it still displays the
following:
* remote jdk19
Fetch URL: git@github.com:openjdk/jdk19.git
Push URL: git@github.com:openjdk/jdk19.git
HEAD branch: master
Remote branches:
master tracked
pr/1 new (next fetch will store in remotes/jdk19)
pr/2 new (next fetch will store in remotes/jdk19)
pr/3 new (next fetch will store in remotes/jdk19)
Local ref configured for 'git push':
master pushes to master (fast-forwardable)
Fix this by adding an additional check inside of get_ref_states. If a
ref matches one of the negative refspecs, mark it as skipped instead of
marking it as new or tracked.
With this change, we now report remote branches that are skipped due to
negative refspecs properly:
* remote jdk19
Fetch URL: git@github.com:openjdk/jdk19.git
Push URL: git@github.com:openjdk/jdk19.git
HEAD branch: master
Remote branches:
master tracked
pr/1 skipped
pr/2 skipped
pr/3 skipped
Local ref configured for 'git push':
master pushes to master (fast-forwardable)
By showing the refs as skipped, it helps clarify that these references
won't actually be fetched.
This does not properly handle refs going stale due to a newly added
negative refspec. In addition, git remote prune doesn't handle that
negative refspec case either. Fixing that requires digging into
get_stale_heads and handling the case of a ref which exists on the
remote but is omitted due to a negative refspec locally.
Add a new test case which covers the functionality above, as well as a
new expected failure indicating the poor overlap with stale refs.
Reported-by: Pavel Rappo <pavel.rappo@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code added 0cc05b044f (usage.c: add a non-fatal bug() function to go
with BUG(), 2022-06-02) sets up two va_list variables: one to output to
stderr, and one to trace2. But the order of initialization is wrong:
va_list ap, cp;
va_copy(cp, ap);
va_start(ap, fmt);
We copy the contents of "ap" into "cp" before it is initialized, meaning
it is full of garbage. The two should be swapped.
However, there's another bug, noticed by Johannes Schindelin: we forget
to call va_end() for the copy. So instead of just fixing the copy's
initialization, let's do two separate start/end pairs. This is allowed
by the standard, and we don't need to use copy here since we have access
to the original varargs. Matching the pairs with the calls makes it more
obvious that everything is being done correctly.
Note that we do call bug_fl() in the tests, but it didn't trigger this
problem because our format string doesn't have any placeholders. So even
though we were passing a garbage va_list through the stack, nobody ever
needed to look at it. We can easily adjust one of the trace2 tests to
trigger this, both for bug() and for BUG(). The latter isn't broken, but
it's nice to exercise both a bit more. Without the fix in this patch
(but with the test change), the bug() case causes a segfault.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a 'git repack --cruft -d' with the wrapper 'git gc --cruft' to
exercise some logic in builtin/gc.c that adds the '--cruft' option to
the underlying 'git repack' command.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--verbose' option reports what is being added and removed from the
index, but has not been tested up to this point. Augment the tests in
t2107 to check the '--verbose' option in some scenarios.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5dccd9155f (t/perf: add iteration setup mechanism to perf-lib,
2022-04-04) modified the parameter parsing of test_wrapper() such that
the test title was no longer in $1, and is instead in $test_title_.
We correctly pass the new variable to the code which outputs the title
to the log, but missed the spot in test_wrapper() where the title is
written to the ".descr" file which is used to produce the final output
table. As a result, all of the titles are missing from that table (or
worse, using whatever was left in $1):
$ ./p0000-perf-lib-sanity.sh
[...]
Test this tree
------------------------------
0000.1: 0.01(0.01+0.00)
0000.2: 0.01(0.00+0.01)
0000.4: 0.00(0.00+0.00)
0000.5: true 0.00(0.00+0.00)
0000.7: 0.00(0.00+0.00)
0000.8: 0.00(0.00+0.00)
After this patch, we get the pre-5dccd9155f output:
Test this tree
--------------------------------------------------------------------------
0000.1: test_perf_default_repo works 0.00(0.00+0.00)
0000.2: test_checkout_worktree works 0.01(0.00+0.01)
0000.4: export a weird var 0.00(0.00+0.00)
0000.5: éḿíẗ ńöń-ÁŚĆÍÍ ćḧáŕáćẗéŕś 0.00(0.00+0.00)
0000.7: important variables available in subshells 0.00(0.00+0.00)
0000.8: test-lib-functions correctly loaded in subshells 0.00(0.00+0.00)
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git revert" learns "--reference" option to use more human-readable
reference to the commit it reverts in the message template it
prepares for the user.
* jc/revert-show-parent-info:
revert: --reference should apply only to 'revert', not 'cherry-pick'
revert: optionally refer to commit in the "reference" format
Drop the dependency on gzip(1) and use our internal implementation to
create tar.gz and tgz files.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git uses zlib for its own object store, but calls gzip when creating tgz
archives. Add an option to perform the gzip compression for the latter
using zlib, without depending on the external gzip binary.
Plug it in by making write_block a function pointer and switching to a
compressing variant if the filter command has the magic value "git
archive gzip". Does that indirection slow down tar creation? Not
really, at least not in this test:
$ hyperfine -w3 -L rev HEAD,origin/main -p 'git checkout {rev} && make' \
'./git -C ../linux archive --format=tar HEAD # {rev}'
Benchmark #1: ./git -C ../linux archive --format=tar HEAD # HEAD
Time (mean ± σ): 4.044 s ± 0.007 s [User: 3.901 s, System: 0.137 s]
Range (min … max): 4.038 s … 4.059 s 10 runs
Benchmark #2: ./git -C ../linux archive --format=tar HEAD # origin/main
Time (mean ± σ): 4.047 s ± 0.009 s [User: 3.903 s, System: 0.138 s]
Range (min … max): 4.038 s … 4.066 s 10 runs
How does tgz creation perform?
$ hyperfine -w3 -L command 'gzip -cn','git archive gzip' \
'./git -c tar.tgz.command="{command}" -C ../linux archive --format=tgz HEAD'
Benchmark #1: ./git -c tar.tgz.command="gzip -cn" -C ../linux archive --format=tgz HEAD
Time (mean ± σ): 20.404 s ± 0.006 s [User: 23.943 s, System: 0.401 s]
Range (min … max): 20.395 s … 20.414 s 10 runs
Benchmark #2: ./git -c tar.tgz.command="git archive gzip" -C ../linux archive --format=tgz HEAD
Time (mean ± σ): 23.807 s ± 0.023 s [User: 23.655 s, System: 0.145 s]
Range (min … max): 23.782 s … 23.857 s 10 runs
Summary
'./git -c tar.tgz.command="gzip -cn" -C ../linux archive --format=tgz HEAD' ran
1.17 ± 0.00 times faster than './git -c tar.tgz.command="git archive gzip" -C ../linux archive --format=tgz HEAD'
So the internal implementation takes 17% longer on the Linux repo, but
uses 2% less CPU time. That's because the external gzip can run in
parallel on its own processor, while the internal one works sequentially
and avoids the inter-process communication overhead.
What are the benefits? Only an internal sequential implementation can
offer this eco mode, and it allows avoiding the gzip(1) requirement.
This implementation uses the helper functions from our zlib.c instead of
the convenient gz* functions from zlib, because the latter doesn't give
the control over the generated gzip header that the next patch requires.
Original-patch-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and use a LIBCURL prerequisite for tests added in
6dcbdc0d66 (remote: create fetch.credentialsInUrl config,
2022-06-06).
These tests would get as far as emitting a couple of the warnings we
were testing for, but would then die as we had no "git-remote-https"
program compiled.
It would be more consistent with other prerequisites (e.g. PERL for
NO_PERL) to name this "CURL", but since e9184b0789 (t5561: skip tests
if curl is not available, 2018-04-03) we've had that prerequisite
defined for checking of we have the curl(1) program.
The existing "CURL" prerequisite is only used in one place, and we
should probably name it "CURL_PROGRAM", then rename "LIBCURL" to
"CURL" as a follow-up, but for now (pre-v2.37.0) let's aim for the
most minimal fix possible.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "fetch.credentialsInUrl" configuration variable introduced
in 6dcbdc0d66 (remote: create fetch.credentialsInUrl config,
2022-06-06) to "transfer".
There are existing exceptions, but generally speaking the
"<namespace>.<var>" configuration should only apply to command
described in the "namespace" (and its sub-commands, so e.g. "clone.*"
or "fetch.*" might also configure "git-remote-https").
But in the case of "fetch.credentialsInUrl" we've got a configuration
variable that configures the behavior of all of "clone", "push" and
"fetch", someone adjusting "fetch.*" configuration won't expect to
have the behavior of "git push" altered, especially as we have the
pre-existing "{transfer,fetch,receive}.fsckObjects", which configures
different parts of the transfer dialog.
So let's move this configuration variable to the "transfer" namespace
before it's exposed in a release. We could add all of
"{transfer,fetch,pull}.credentialsInUrl" at some other time, but once
we have "fetch" configure "pull" such an arrangement would would be a
confusing mess, as we'd at least need to have "fetch" configure
"push" (but not the other way around), or change existing behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch_checked_out() method populates a strmap linking a refname to
a worktree that has that branch checked out. While unlikely, it is
possible that a bug or filesystem manipulation could create a scenario
where the same ref is checked out in multiple places. Further, there are
some states in an interactive rebase where HEAD and REBASE_HEAD point to
the same ref, leading to multiple insertions into the strmap. In either
case, the strmap_put() method returns the old value which is leaked.
Update branch_checked_out() to consume that pointer and free it.
Add a test in t2407 that checks this erroneous case. The test "checks
itself" by first confirming that the filesystem manipulations it makes
trigger the branch_checked_out() logic, and then sets up similar
manipulations to make it look like there are multiple worktrees pointing
to the same ref.
While TEST_PASSES_SANITIZE_LEAK would be helpful to demonstrate the
leakage and prevent it in the future, t2407 uses helpers such as 'git
clone' that cause the test to fail under that mode.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the last current use of find_shared_symref() that can easily be
replaced by branch_checked_out(). The benefit of this switch is that the
code is a bit simpler, but also it is faster on repeated calls.
The remaining uses of find_shared_symref() are non-trivial to remove, so
we probably should not continue in that direction:
* builtin/notes.c uses find_shared_symref() with "NOTES_MERGE_REF"
instead of "HEAD", so it doesn't have an immediate analogue with
branch_checked_out(). Perhaps we should consider extending it to
include that symref in addition to HEAD, BISECT_HEAD, and
REBASE_HEAD.
* receive-pack.c checks to see if a worktree has a checkout for the ref
that is being updated. The tricky part is that it can actually decide
to update the worktree directly instead of just skipping the update.
This all depends on the receive.denyCurrentBranch config option. The
implementation currenty cares about receiving the worktree in the
result, so the current branch_checked_out() prototype is insufficient
currently. This is something to investigate later, though, since a
large number of refs could be updated at the same time and using the
strmap implementation of branch_checked_out() could be beneficial.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching refs from a remote, it is possible that the refspec will
cause use to overwrite a ref that is checked out in a worktree. The
existing logic in builtin/fetch.c uses a possibly-slow mechanism. Update
those sections to use the new, more efficient branch_checked_out()
helper.
These uses were not previously tested, so add a test case that can be
used for these kinds of collisions. There is only one test now, but more
tests will be added as other consumers of branch_checked_out() are
added.
Note that there are two uses in builtin/fetch.c, but only one of the
messages is tested. This is because the tested check is run before
completing the fetch, and the untested check is not reachable without
concurrent updates to the filesystem. Thus, it is beneficial to keep
that extra check for the sake of defense-in-depth. However, we should
not attempt to test the check, as the effort required is too
complicated to be worth the effort. This use in update_local_ref()
also requires a change in the error message because we no longer have
access to the worktree struct, only the path of the worktree. This error
is so rare that making a distinction between the two is not critical.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch_checked_out() helper was added by the previous change, but it
used an over-simplified view to check if a branch is checked out. It
only focused on the HEAD symref, but ignored whether a bisect or rebase
was happening.
Teach branch_checked_out() to check for these things, and also add tests
to ensure that we do not lose this functionality in the future.
Now that this test coverage exists, we can safely refactor
validate_new_branchname() to use branch_checked_out().
Note that we need to prepend "refs/heads/" to the 'state.branch' after
calling wt_status_check_*(). We also need to duplicate wt->path so the
value is not freed at the end of the call.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The validate_new_branchname() method contains a check to see if a branch
is checked out in any non-bare worktree. This is intended to prevent a
force push that will mess up an existing checkout. This helper is not
suitable to performing just that check, because the method will die()
when the branch is checked out instead of returning an error code.
Create a new branch_checked_out() helper that performs the most basic
form of this check. To ensure we can call branch_checked_out() in a loop
with good performance, do a single preparation step that iterates over
all worktrees and stores their current HEAD branches in a strmap. The
branch_checked_out() helper can then discover these branches using a
hash lookup.
This helper is currently missing some key functionality. Namely: it
doesn't look for active rebases or bisects which mean that the branch is
"checked out" even though HEAD doesn't point to that ref. This
functionality will be added in a coming change.
We could use branch_checked_out() in validate_new_branchname(), but this
missing functionality would be a regression. However, we have no tests
that cover this case!
Add a new test script that will be expanded with these cross-worktree
ref updates. The current tests would still pass if we refactored
validate_new_branchname() to use this version of branch_checked_out().
The next change will fix that functionality and add the proper test
coverage.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an issue that existed before 0527ccb1b5 (add -i: default to the
built-in implementation, 2021-11-30), but which became the default
with that change, we should not be marking tests that are known to
pass as "TODO" tests.
When GIT_TEST_ADD_I_USE_BUILTIN=1 was made the default we started
passing the tests added in 0f0fba2cc8 (t3701: add a test for advanced
split-hunk editing, 2019-12-06) and 1bf01040f0 (add -p: demonstrate
failure when running 'edit' after a split, 2015-04-16).
Thus we've been emitting this sort of output:
$ prove ./t3701-add-interactive.sh
./t3701-add-interactive.sh .. ok
All tests successful.
Test Summary Report
-------------------
./t3701-add-interactive.sh (Wstat: 0 Tests: 70 Failed: 0)
TODO passed: 45, 47
Files=1, Tests=70, 2 wallclock secs ( 0.03 usr 0.00 sys + 0.86 cusr 0.33 csys = 1.22 CPU)
Result: PASS
Which isn't just cosmetic, but due to issues with
test_expect_failure (see [1]) we could e.g. be hiding something as bad
as a segfault in the new implementation. It makes sense catch that,
especially before we put out a release with the built-in "add -i", so
let's generalize the check we were already doing in 0527ccb1b5 with a
new "ADD_I_USE_BUILTIN" prerequisite.
1. https://lore.kernel.org/git/patch-1.7-4624abc2591-20220318T002951Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "fetch.credentialsInUrl" configuration variable controls what
happens when a URL with embedded login credential is used.
* ds/credentials-in-url:
remote: create fetch.credentialsInUrl config
Updating the graft information invalidates the list of parents of
in-core commit objects that used to be in the graft file.
* jt/unparse-commit-upon-graft-change:
commit,shallow: unparse commits if grafts changed
In Git 2.36 we revamped the way how hooks are invoked. One change
that is end-user visible is that the output of a hook is no longer
directly connected to the standard output of "git" that spawns the
hook, which was noticed post release. This is getting corrected.
* ab/hooks-regression-fix:
hook API: fix v2.36.0 regression: hooks should be connected to a TTY
run-command: add an "ungroup" option to run_process_parallel()
"git -c diff.submodule=log range-diff" did not show anything for
submodules that changed in the ranges being compared, and
"git -c diff.submodule=diff range-diff" did not work correctly.
Fix this by including the "--submodule=short" output
unconditionally to be compared.
* pb/range-diff-with-submodule:
range-diff: show submodule changes irrespective of diff.submodule
Make use of the stream_loose_object() function introduced in the
preceding commit to unpack large objects. Before this we'd need to
malloc() the size of the blob before unpacking it, which could cause
OOM with very large blobs.
We could use the new streaming interface to unpack all blobs, but
doing so would be much slower, as demonstrated e.g. with this
benchmark using git-hyperfine[0]:
rm -rf /tmp/scalar.git &&
git clone --bare https://github.com/Microsoft/scalar.git /tmp/scalar.git &&
mv /tmp/scalar.git/objects/pack/*.pack /tmp/scalar.git/my.pack &&
git hyperfine \
-r 2 --warmup 1 \
-L rev origin/master,HEAD -L v "10,512,1k,1m" \
-s 'make' \
-p 'git init --bare dest.git' \
-c 'rm -rf dest.git' \
'./git -C dest.git -c core.bigFileThreshold={v} unpack-objects </tmp/scalar.git/my.pack'
Here we'll perform worse with lower core.bigFileThreshold settings
with this change in terms of speed, but we're getting lower memory use
in return:
Summary
'./git -C dest.git -c core.bigFileThreshold=10 unpack-objects </tmp/scalar.git/my.pack' in 'origin/master' ran
1.01 ± 0.01 times faster than './git -C dest.git -c core.bigFileThreshold=1k unpack-objects </tmp/scalar.git/my.pack' in 'origin/master'
1.01 ± 0.01 times faster than './git -C dest.git -c core.bigFileThreshold=1m unpack-objects </tmp/scalar.git/my.pack' in 'origin/master'
1.01 ± 0.02 times faster than './git -C dest.git -c core.bigFileThreshold=1m unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
1.02 ± 0.00 times faster than './git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/scalar.git/my.pack' in 'origin/master'
1.09 ± 0.01 times faster than './git -C dest.git -c core.bigFileThreshold=1k unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
1.10 ± 0.00 times faster than './git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
1.11 ± 0.00 times faster than './git -C dest.git -c core.bigFileThreshold=10 unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
A better benchmark to demonstrate the benefits of that this one, which
creates an artificial repo with a 1, 25, 50, 75 and 100MB blob:
rm -rf /tmp/repo &&
git init /tmp/repo &&
(
cd /tmp/repo &&
for i in 1 25 50 75 100
do
dd if=/dev/urandom of=blob.$i count=$(($i*1024)) bs=1024
done &&
git add blob.* &&
git commit -mblobs &&
git gc &&
PACK=$(echo .git/objects/pack/pack-*.pack) &&
cp "$PACK" my.pack
) &&
git hyperfine \
--show-output \
-L rev origin/master,HEAD -L v "512,50m,100m" \
-s 'make' \
-p 'git init --bare dest.git' \
-c 'rm -rf dest.git' \
'/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold={v} unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum'
Using this test we'll always use >100MB of memory on
origin/master (around ~105MB), but max out at e.g. ~55MB if we set
core.bigFileThreshold=50m.
The relevant "Maximum resident set size" lines were manually added
below the relevant benchmark:
'/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=50m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'origin/master' ran
Maximum resident set size (kbytes): 107080
1.02 ± 0.78 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'origin/master'
Maximum resident set size (kbytes): 106968
1.09 ± 0.79 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=100m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'origin/master'
Maximum resident set size (kbytes): 107032
1.42 ± 1.07 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=100m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'HEAD'
Maximum resident set size (kbytes): 107072
1.83 ± 1.02 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=50m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'HEAD'
Maximum resident set size (kbytes): 55704
2.16 ± 1.19 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'HEAD'
Maximum resident set size (kbytes): 4564
This shows that if you have enough memory this new streaming method is
slower the lower you set the streaming threshold, but the benefit is
more bounded memory use.
An earlier version of this patch introduced a new
"core.bigFileStreamingThreshold" instead of re-using the existing
"core.bigFileThreshold" variable[1]. As noted in a detailed overview
of its users in [2] using it has several different meanings.
Still, we consider it good enough to simply re-use it. While it's
possible that someone might want to e.g. consider objects "small" for
the purposes of diffing but "big" for the purposes of writing them
such use-cases are probably too obscure to worry about. We can always
split up "core.bigFileThreshold" in the future if there's a need for
that.
0. https://github.com/avar/git-hyperfine/
1. https://lore.kernel.org/git/20211210103435.83656-1-chiyutianyi@gmail.com/
2. https://lore.kernel.org/git/20220120112114.47618-5-chiyutianyi@gmail.com/
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Derrick Stolee <stolee@gmail.com>
Helped-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the name implies, "get_data(size)" will allocate and return a given
amount of memory. Allocating memory for a large blob object may cause the
system to run out of memory. Before preparing to replace calling of
"get_data()" to unpack large blob objects in latter commits, refactor
"get_data()" to reduce memory footprint for dry_run mode.
Because in dry_run mode, "get_data()" is only used to check the
integrity of data, and the returned buffer is not used at all, we can
allocate a smaller buffer and use it as zstream output. Make the function
return NULL in the dry-run mode, as no callers use the returned buffer.
The "find [...]objects/?? -type f | wc -l" test idiom being used here
is adapted from the same "find" use added to another test in
d9545c7f46 (fast-import: implement unpack limit, 2016-04-25).
Suggested-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new bug() and BUG_if_bug() API is introduced to make it easier to
uniformly log "detect multiple bugs and abort in the end" pattern.
* ab/bug-if-bug:
cache-tree.c: use bug() and BUG_if_bug()
receive-pack: use bug() and BUG_if_bug()
parse-options.c: use optbug() instead of BUG() "opts" check
parse-options.c: use new bug() API for optbug()
usage.c: add a non-fatal bug() function to go with BUG()
common-main.c: move non-trace2 exit() behavior out of trace2.c
More fsmonitor--daemon.
* jh/builtin-fsmonitor-part3: (30 commits)
t7527: improve implicit shutdown testing in fsmonitor--daemon
fsmonitor--daemon: allow --super-prefix argument
t7527: test Unicode NFC/NFD handling on MacOS
t/lib-unicode-nfc-nfd: helper prereqs for testing unicode nfc/nfd
t/helper/hexdump: add helper to print hexdump of stdin
fsmonitor: on macOS also emit NFC spelling for NFD pathname
t7527: test FSMonitor on case insensitive+preserving file system
fsmonitor: never set CE_FSMONITOR_VALID on submodules
t/perf/p7527: add perf test for builtin FSMonitor
t7527: FSMonitor tests for directory moves
fsmonitor: optimize processing of directory events
fsm-listen-darwin: shutdown daemon if worktree root is moved/renamed
fsm-health-win32: force shutdown daemon if worktree root moves
fsm-health-win32: add polling framework to monitor daemon health
fsmonitor--daemon: stub in health thread
fsmonitor--daemon: rename listener thread related variables
fsmonitor--daemon: prepare for adding health thread
fsmonitor--daemon: cd out of worktree root
fsm-listen-darwin: ignore FSEvents caused by xattr changes on macOS
unpack-trees: initialize fsmonitor_has_run_once in o->result
...
A misconfigured 'branch..remote' led to a bug in configuration
parsing.
* gc/zero-length-branch-config-fix:
remote.c: reject 0-length branch names
remote.c: don't BUG() on 0-length branch names
Rename .env_array member to .env in the child_process structure.
* ab/env-array:
run-command API users: use "env" not "env_array" in comments & names
run-command API: rename "env_array" to "env"
Because of the wrapping of the branch name variable $b, the colour codes
in the variable don't get applied, but are instead printed directly in
the output. Move the wrapping of $b to before colour codes are inserted
to correct this. Revert move of branch name colour codes in tests, as
the branch name is now coloured after the wrapping instead of before.
Signed-off-by: Joakim Petersen <joak-pet@online.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The resolve-undo extension was added to the index in cfc5789a
(resolve-undo: record resolved conflicts in a new index extension
section, 2009-12-25). This extension records the blob object names
and their modes of conflicted paths when the path gets resolved
(e.g. with "git add"), to allow "undoing" the resolution with
"checkout -m path". These blob objects should be guarded from
garbage-collection while we have the resolve-undo information in the
index (otherwise unresolve operation may try to use a blob object
that has already been pruned away).
But the code called from mark_reachable_objects() for the index
forgets to do so. Teach add_index_objects_to_pending() helper to
also add objects referred to by the resolve-undo extension.
Also make matching changes to "fsck", which has code that is fairly
similar to the reachability stuff, but have parallel implementations
for all these stuff, which may (or may not) someday want to be unified.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --keep-base <upstream> <branch-to-rebase>" computed the
commit to rebase onto incorrectly, which has been corrected.
source: <20220421044233.894255-1-alexhenrie24@gmail.com>
* ah/rebase-keep-base-fix:
rebase: use correct base for --keep-base when a branch is given
Avoid problems from interaction between malloc_check and address
sanitizer.
source: <pull.1210.git.1649507317350.gitgitgadget@gmail.com>
* pw/test-malloc-with-sanitize-address:
tests: make SANITIZE=address imply TEST_NO_MALLOC_CHECK
The commit summary shown after making a commit is matched to what
is given in "git status" not to use the break-rewrite heuristics.
source: <c35bd0aa-2e46-e710-2b39-89f18bad0097@web.de>
* rs/commit-summary-wo-break-rewrite:
commit, sequencer: turn off break_opt for commit summary
A bit of test framework fixes with a few fixes to issues found by
valgrind.
source: <20220512223218.237544-1-gitster@pobox.com>
* ab/valgrind-fixes:
commit-graph.c: don't assume that stat() succeeds
object-file: fix a unpack_loose_header() regression in 3b6a8db3b0
log test: skip a failing mkstemp() test under valgrind
tests: using custom GIT_EXEC_PATH breaks --valgrind tests
The "--current" option of "git show-branch" should have been made
incompatible with the "--reflog" mode, but this was not enforced,
which has been corrected.
source: <xmqqh76mf7s4.fsf_-_@gitster.g>
* jc/show-branch-g-current:
show-branch: -g and --current are incompatible
Test that "git config --show-scope" shows the "worktree" scope, and add
it to the list of scopes in Documentation/git-config.txt.
"git config --help" does not need to be updated because it already
mentions "worktree".
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A git subcommand like "git add -p" spawns a separate git process
while relaying its command line arguments. A pathspec with only
negative elements was mistakenly passed with an empty string, which
has been corrected.
* jc/all-negative-pathspec:
pathspec: correct an empty string used as a pathspec element
