git/t/t1006-cat-file.sh

1091 lines
34 KiB
Bash
Raw Normal View History

#!/bin/sh
test_description='git cat-file'
. ./test-lib.sh
test_cmdmode_usage () {
test_expect_code 129 "$@" 2>err &&
grep "^error:.*is incompatible with" err
}
for switches in \
'-e -p' \
'-p -t' \
'-t -s' \
'-s --textconv' \
'--textconv --filters' \
'--batch-all-objects -e'
do
test_expect_success "usage: cmdmode $switches" '
test_cmdmode_usage git cat-file $switches
'
done
test_incompatible_usage () {
test_expect_code 129 "$@" 2>err &&
grep -E "^(fatal|error):.*(requires|incompatible with|needs)" err
}
for opt in --batch --batch-check
do
test_expect_success "usage: incompatible options: --path with $opt" '
test_incompatible_usage git cat-file --path=foo $opt
'
done
test_missing_usage () {
test_expect_code 129 "$@" 2>err &&
grep -E "^fatal:.*required" err
}
short_modes="-e -p -t -s"
cw_modes="--textconv --filters"
for opt in $cw_modes
do
test_expect_success "usage: $opt requires another option" '
test_missing_usage git cat-file $opt
'
done
for opt in $short_modes
do
test_expect_success "usage: $opt requires another option" '
test_missing_usage git cat-file $opt
'
for opt2 in --batch \
--batch-check \
--follow-symlinks \
"--path=foo HEAD:some-path.txt"
do
test_expect_success "usage: incompatible options: $opt and $opt2" '
test_incompatible_usage git cat-file $opt $opt2
'
done
done
test_too_many_arguments () {
test_expect_code 129 "$@" 2>err &&
grep -E "^fatal: too many arguments$" err
}
for opt in $short_modes $cw_modes
do
args="one two three"
test_expect_success "usage: too many arguments: $opt $args" '
test_too_many_arguments git cat-file $opt $args
'
for opt2 in --buffer --follow-symlinks
do
test_expect_success "usage: incompatible arguments: $opt with batch option $opt2" '
test_incompatible_usage git cat-file $opt $opt2
'
done
done
for opt in --buffer \
--follow-symlinks \
--batch-all-objects
do
test_expect_success "usage: bad option combination: $opt without batch mode" '
test_incompatible_usage git cat-file $opt &&
test_incompatible_usage git cat-file $opt commit HEAD
'
done
echo_without_newline () {
printf '%s' "$*"
}
strlen () {
echo_without_newline "$1" | wc -c | sed -e 's/^ *//'
}
maybe_remove_timestamp () {
if test -z "$2"; then
echo_without_newline "$1"
else
echo_without_newline "$(printf '%s\n' "$1" | remove_timestamp)"
fi
}
remove_timestamp () {
sed -e 's/ [0-9][0-9]* [-+][0-9][0-9][0-9][0-9]$//'
}
run_tests () {
type=$1
sha1=$2
size=$3
content=$4
pretty_content=$5
no_ts=$6
batch_output="$sha1 $type $size
$content"
test_expect_success "$type exists" '
git cat-file -e $sha1
'
test_expect_success "Type of $type is correct" '
echo $type >expect &&
git cat-file -t $sha1 >actual &&
test_cmp expect actual
'
test_expect_success "Size of $type is correct" '
echo $size >expect &&
git cat-file -s $sha1 >actual &&
test_cmp expect actual
'
test_expect_success "Type of $type is correct using --allow-unknown-type" '
echo $type >expect &&
git cat-file -t --allow-unknown-type $sha1 >actual &&
test_cmp expect actual
'
test_expect_success "Size of $type is correct using --allow-unknown-type" '
echo $size >expect &&
git cat-file -s --allow-unknown-type $sha1 >actual &&
test_cmp expect actual
'
test -z "$content" ||
test_expect_success "Content of $type is correct" '
maybe_remove_timestamp "$content" $no_ts >expect &&
maybe_remove_timestamp "$(git cat-file $type $sha1)" $no_ts >actual &&
test_cmp expect actual
'
test_expect_success "Pretty content of $type is correct" '
maybe_remove_timestamp "$pretty_content" $no_ts >expect &&
maybe_remove_timestamp "$(git cat-file -p $sha1)" $no_ts >actual &&
test_cmp expect actual
'
test -z "$content" ||
test_expect_success "--batch output of $type is correct" '
maybe_remove_timestamp "$batch_output" $no_ts >expect &&
maybe_remove_timestamp "$(echo $sha1 | git cat-file --batch)" $no_ts >actual &&
test_cmp expect actual
'
test_expect_success "--batch-check output of $type is correct" '
echo "$sha1 $type $size" >expect &&
echo_without_newline $sha1 | git cat-file --batch-check >actual &&
test_cmp expect actual
'
cat-file: add --batch-command mode Add a new flag --batch-command that accepts commands and arguments from stdin, similar to git-update-ref --stdin. At GitLab, we use a pair of long running cat-file processes when accessing object content. One for iterating over object metadata with --batch-check, and the other to grab object contents with --batch. However, if we had --batch-command, we wouldn't need to keep both processes around, and instead just have one --batch-command process where we can flip between getting object info, and getting object contents. Since we have a pair of cat-file processes per repository, this means we can get rid of roughly half of long lived git cat-file processes. Given there are many repositories being accessed at any given time, this can lead to huge savings. git cat-file --batch-command will enter an interactive command mode whereby the user can enter in commands and their arguments that get queued in memory: <command1> [arg1] [arg2] LF <command2> [arg1] [arg2] LF When --buffer mode is used, commands will be queued in memory until a flush command is issued that execute them: flush LF The reason for a flush command is that when a consumer process (A) talks to a git cat-file process (B) and interactively writes to and reads from it in --buffer mode, (A) needs to be able to control when the buffer is flushed to stdout. Currently, from (A)'s perspective, the only way is to either 1. kill (B)'s process 2. send an invalid object to stdin. 1. is not ideal from a performance perspective as it will require spawning a new cat-file process each time, and 2. is hacky and not a good long term solution. With this mechanism of queueing up commands and letting (A) issue a flush command, process (A) can control when the buffer is flushed and can guarantee it will receive all of the output when in --buffer mode. --batch-command also will not allow (B) to flush to stdout until a flush is received. This patch adds the basic structure for adding command which can be extended in the future to add more commands. It also adds the following two commands (on top of the flush command): contents <object> LF info <object> LF The contents command takes an <object> argument and prints out the object contents. The info command takes an <object> argument and prints out the object metadata. These can be used in the following way with --buffer: info <object> LF contents <object> LF contents <object> LF info <object> LF flush LF info <object> LF flush LF When used without --buffer: info <object> LF contents <object> LF contents <object> LF info <object> LF info <object> LF Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: John Cai <johncai86@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-02-18 18:23:14 +00:00
for opt in --buffer --no-buffer
do
test -z "$content" ||
test_expect_success "--batch-command $opt output of $type content is correct" '
maybe_remove_timestamp "$batch_output" $no_ts >expect &&
maybe_remove_timestamp "$(test_write_lines "contents $sha1" |
git cat-file --batch-command $opt)" $no_ts >actual &&
test_cmp expect actual
'
test_expect_success "--batch-command $opt output of $type info is correct" '
echo "$sha1 $type $size" >expect &&
test_write_lines "info $sha1" |
git cat-file --batch-command $opt >actual &&
test_cmp expect actual
'
done
test_expect_success "custom --batch-check format" '
echo "$type $sha1" >expect &&
echo $sha1 | git cat-file --batch-check="%(objecttype) %(objectname)" >actual &&
test_cmp expect actual
'
cat-file: only split on whitespace when %(rest) is used Commit c334b87b (cat-file: split --batch input lines on whitespace, 2013-07-11) taught `cat-file --batch-check` to split input lines on the first whitespace, and stash everything after the first token into the %(rest) output format element. It claimed: Object names cannot contain spaces, so any input with spaces would have resulted in a "missing" line. But that is not correct. Refs, object sha1s, and various peeling suffixes cannot contain spaces, but some object names can. In particular: 1. Tree paths like "[<tree>]:path with whitespace" 2. Reflog specifications like "@{2 days ago}" 3. Commit searches like "rev^{/grep me}" or ":/grep me" To remain backwards compatible, we cannot split on whitespace by default, hence we will ship 1.8.4 with the commit reverted. Resurrect its attempt but in a weaker form; only do the splitting when "%(rest)" is used in the output format. Since that element did not exist at all before c334b87, old scripts cannot be affected. The existence of object names with spaces does mean that you cannot reliably do: echo ":path with space and other data" | git cat-file --batch-check="%(objectname) %(rest)" as it would split the path and feed only ":path" to get_sha1. But that command is nonsensical. If you wanted to see "and other data" in "%(rest)", git cannot possibly know where the filename ends and the "rest" begins. It might be more robust to have something like "-z" to separate the input elements. But this patch is still a reasonable step before having that. It makes the easy cases easy; people who do not care about %(rest) do not have to consider it, and the %(rest) code handles the spaces and newlines of "rev-list --objects" correctly. Hard cases remain hard but possible (if you might get whitespace in your input, you do not get to use %(rest) and must split and join the output yourself using more flexible tools). And most importantly, it does not preclude us from having different splitting rules later if a "-z" (or similar) option is added. So we can make the hard cases easier later, if we choose to. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-02 11:59:07 +00:00
cat-file: add --batch-command mode Add a new flag --batch-command that accepts commands and arguments from stdin, similar to git-update-ref --stdin. At GitLab, we use a pair of long running cat-file processes when accessing object content. One for iterating over object metadata with --batch-check, and the other to grab object contents with --batch. However, if we had --batch-command, we wouldn't need to keep both processes around, and instead just have one --batch-command process where we can flip between getting object info, and getting object contents. Since we have a pair of cat-file processes per repository, this means we can get rid of roughly half of long lived git cat-file processes. Given there are many repositories being accessed at any given time, this can lead to huge savings. git cat-file --batch-command will enter an interactive command mode whereby the user can enter in commands and their arguments that get queued in memory: <command1> [arg1] [arg2] LF <command2> [arg1] [arg2] LF When --buffer mode is used, commands will be queued in memory until a flush command is issued that execute them: flush LF The reason for a flush command is that when a consumer process (A) talks to a git cat-file process (B) and interactively writes to and reads from it in --buffer mode, (A) needs to be able to control when the buffer is flushed to stdout. Currently, from (A)'s perspective, the only way is to either 1. kill (B)'s process 2. send an invalid object to stdin. 1. is not ideal from a performance perspective as it will require spawning a new cat-file process each time, and 2. is hacky and not a good long term solution. With this mechanism of queueing up commands and letting (A) issue a flush command, process (A) can control when the buffer is flushed and can guarantee it will receive all of the output when in --buffer mode. --batch-command also will not allow (B) to flush to stdout until a flush is received. This patch adds the basic structure for adding command which can be extended in the future to add more commands. It also adds the following two commands (on top of the flush command): contents <object> LF info <object> LF The contents command takes an <object> argument and prints out the object contents. The info command takes an <object> argument and prints out the object metadata. These can be used in the following way with --buffer: info <object> LF contents <object> LF contents <object> LF info <object> LF flush LF info <object> LF flush LF When used without --buffer: info <object> LF contents <object> LF contents <object> LF info <object> LF info <object> LF Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: John Cai <johncai86@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-02-18 18:23:14 +00:00
test_expect_success "custom --batch-command format" '
echo "$type $sha1" >expect &&
echo "info $sha1" | git cat-file --batch-command="%(objecttype) %(objectname)" >actual &&
test_cmp expect actual
'
cat-file: only split on whitespace when %(rest) is used Commit c334b87b (cat-file: split --batch input lines on whitespace, 2013-07-11) taught `cat-file --batch-check` to split input lines on the first whitespace, and stash everything after the first token into the %(rest) output format element. It claimed: Object names cannot contain spaces, so any input with spaces would have resulted in a "missing" line. But that is not correct. Refs, object sha1s, and various peeling suffixes cannot contain spaces, but some object names can. In particular: 1. Tree paths like "[<tree>]:path with whitespace" 2. Reflog specifications like "@{2 days ago}" 3. Commit searches like "rev^{/grep me}" or ":/grep me" To remain backwards compatible, we cannot split on whitespace by default, hence we will ship 1.8.4 with the commit reverted. Resurrect its attempt but in a weaker form; only do the splitting when "%(rest)" is used in the output format. Since that element did not exist at all before c334b87, old scripts cannot be affected. The existence of object names with spaces does mean that you cannot reliably do: echo ":path with space and other data" | git cat-file --batch-check="%(objectname) %(rest)" as it would split the path and feed only ":path" to get_sha1. But that command is nonsensical. If you wanted to see "and other data" in "%(rest)", git cannot possibly know where the filename ends and the "rest" begins. It might be more robust to have something like "-z" to separate the input elements. But this patch is still a reasonable step before having that. It makes the easy cases easy; people who do not care about %(rest) do not have to consider it, and the %(rest) code handles the spaces and newlines of "rev-list --objects" correctly. Hard cases remain hard but possible (if you might get whitespace in your input, you do not get to use %(rest) and must split and join the output yourself using more flexible tools). And most importantly, it does not preclude us from having different splitting rules later if a "-z" (or similar) option is added. So we can make the hard cases easier later, if we choose to. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-02 11:59:07 +00:00
test_expect_success '--batch-check with %(rest)' '
echo "$type this is some extra content" >expect &&
echo "$sha1 this is some extra content" |
git cat-file --batch-check="%(objecttype) %(rest)" >actual &&
test_cmp expect actual
'
cat-file: handle --batch format with missing type/size Commit 98e2092 taught cat-file to stream blobs with --batch, which requires that we look up the object type before loading it into memory. As a result, we now print the object header from information in sha1_object_info, and the actual contents from the read_sha1_file. We double-check that the information we printed in the header matches the content we are about to show. Later, commit 93d2a60 allowed custom header lines for --batch, and commit 5b08640 made type lookups optional. As a result, specifying a header line without the type or size means that we will not look up those items at all. This causes our double-checking to erroneously die with an error; we think the type or size has changed, when in fact it was simply left at "0". For the size, we can fix this by only doing the consistency double-check when we have retrieved the size via sha1_object_info. In the case that we have not retrieved the value, that means we also did not print it, so there is nothing for us to check that we are consistent with. We could do the same for the type. However, besides our consistency check, we also care about the type in deciding whether to stream or not. So instead of handling the case where we do not know the type, this patch instead makes sure that we always trigger a type lookup when we are printing, so that even a format without the type will stream as we would in the normal case. Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-11 23:15:50 +00:00
test -z "$content" ||
test_expect_success "--batch without type ($type)" '
{
echo "$size" &&
maybe_remove_timestamp "$content" $no_ts
} >expect &&
echo $sha1 | git cat-file --batch="%(objectsize)" >actual.full &&
maybe_remove_timestamp "$(cat actual.full)" $no_ts >actual &&
test_cmp expect actual
'
test -z "$content" ||
test_expect_success "--batch without size ($type)" '
{
echo "$type" &&
maybe_remove_timestamp "$content" $no_ts
} >expect &&
echo $sha1 | git cat-file --batch="%(objecttype)" >actual.full &&
maybe_remove_timestamp "$(cat actual.full)" $no_ts >actual &&
test_cmp expect actual
'
}
hello_content="Hello World"
hello_size=$(strlen "$hello_content")
hello_sha1=$(echo_without_newline "$hello_content" | git hash-object --stdin)
test_expect_success "setup" '
echo_without_newline "$hello_content" > hello &&
git update-index --add hello
'
run_tests 'blob' $hello_sha1 $hello_size "$hello_content" "$hello_content"
cat-file: add --batch-command mode Add a new flag --batch-command that accepts commands and arguments from stdin, similar to git-update-ref --stdin. At GitLab, we use a pair of long running cat-file processes when accessing object content. One for iterating over object metadata with --batch-check, and the other to grab object contents with --batch. However, if we had --batch-command, we wouldn't need to keep both processes around, and instead just have one --batch-command process where we can flip between getting object info, and getting object contents. Since we have a pair of cat-file processes per repository, this means we can get rid of roughly half of long lived git cat-file processes. Given there are many repositories being accessed at any given time, this can lead to huge savings. git cat-file --batch-command will enter an interactive command mode whereby the user can enter in commands and their arguments that get queued in memory: <command1> [arg1] [arg2] LF <command2> [arg1] [arg2] LF When --buffer mode is used, commands will be queued in memory until a flush command is issued that execute them: flush LF The reason for a flush command is that when a consumer process (A) talks to a git cat-file process (B) and interactively writes to and reads from it in --buffer mode, (A) needs to be able to control when the buffer is flushed to stdout. Currently, from (A)'s perspective, the only way is to either 1. kill (B)'s process 2. send an invalid object to stdin. 1. is not ideal from a performance perspective as it will require spawning a new cat-file process each time, and 2. is hacky and not a good long term solution. With this mechanism of queueing up commands and letting (A) issue a flush command, process (A) can control when the buffer is flushed and can guarantee it will receive all of the output when in --buffer mode. --batch-command also will not allow (B) to flush to stdout until a flush is received. This patch adds the basic structure for adding command which can be extended in the future to add more commands. It also adds the following two commands (on top of the flush command): contents <object> LF info <object> LF The contents command takes an <object> argument and prints out the object contents. The info command takes an <object> argument and prints out the object metadata. These can be used in the following way with --buffer: info <object> LF contents <object> LF contents <object> LF info <object> LF flush LF info <object> LF flush LF When used without --buffer: info <object> LF contents <object> LF contents <object> LF info <object> LF info <object> LF Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: John Cai <johncai86@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-02-18 18:23:14 +00:00
test_expect_success '--batch-command --buffer with flush for blob info' '
echo "$hello_sha1 blob $hello_size" >expect &&
test_write_lines "info $hello_sha1" "flush" |
GIT_TEST_CAT_FILE_NO_FLUSH_ON_EXIT=1 \
git cat-file --batch-command --buffer >actual &&
test_cmp expect actual
'
test_expect_success '--batch-command --buffer without flush for blob info' '
touch output &&
test_write_lines "info $hello_sha1" |
GIT_TEST_CAT_FILE_NO_FLUSH_ON_EXIT=1 \
git cat-file --batch-command --buffer >>output &&
test_must_be_empty output
'
cat-file: only split on whitespace when %(rest) is used Commit c334b87b (cat-file: split --batch input lines on whitespace, 2013-07-11) taught `cat-file --batch-check` to split input lines on the first whitespace, and stash everything after the first token into the %(rest) output format element. It claimed: Object names cannot contain spaces, so any input with spaces would have resulted in a "missing" line. But that is not correct. Refs, object sha1s, and various peeling suffixes cannot contain spaces, but some object names can. In particular: 1. Tree paths like "[<tree>]:path with whitespace" 2. Reflog specifications like "@{2 days ago}" 3. Commit searches like "rev^{/grep me}" or ":/grep me" To remain backwards compatible, we cannot split on whitespace by default, hence we will ship 1.8.4 with the commit reverted. Resurrect its attempt but in a weaker form; only do the splitting when "%(rest)" is used in the output format. Since that element did not exist at all before c334b87, old scripts cannot be affected. The existence of object names with spaces does mean that you cannot reliably do: echo ":path with space and other data" | git cat-file --batch-check="%(objectname) %(rest)" as it would split the path and feed only ":path" to get_sha1. But that command is nonsensical. If you wanted to see "and other data" in "%(rest)", git cannot possibly know where the filename ends and the "rest" begins. It might be more robust to have something like "-z" to separate the input elements. But this patch is still a reasonable step before having that. It makes the easy cases easy; people who do not care about %(rest) do not have to consider it, and the %(rest) code handles the spaces and newlines of "rev-list --objects" correctly. Hard cases remain hard but possible (if you might get whitespace in your input, you do not get to use %(rest) and must split and join the output yourself using more flexible tools). And most importantly, it does not preclude us from having different splitting rules later if a "-z" (or similar) option is added. So we can make the hard cases easier later, if we choose to. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-02 11:59:07 +00:00
test_expect_success '--batch-check without %(rest) considers whole line' '
echo "$hello_sha1 blob $hello_size" >expect &&
git update-index --add --cacheinfo 100644 $hello_sha1 "white space" &&
test_when_finished "git update-index --remove \"white space\"" &&
echo ":white space" | git cat-file --batch-check >actual &&
test_cmp expect actual
'
tree_sha1=$(git write-tree)
tree_size=$(($(test_oid rawsz) + 13))
tree_pretty_content="100644 blob $hello_sha1 hello"
run_tests 'tree' $tree_sha1 $tree_size "" "$tree_pretty_content"
commit_message="Initial commit"
commit_sha1=$(echo_without_newline "$commit_message" | git commit-tree $tree_sha1)
commit_size=$(($(test_oid hexsz) + 137))
commit_content="tree $tree_sha1
author $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> 0000000000 +0000
committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 0000000000 +0000
$commit_message"
run_tests 'commit' $commit_sha1 $commit_size "$commit_content" "$commit_content" 1
tag_header_without_timestamp="object $hello_sha1
type blob
tag hellotag
tagger $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>"
tag_description="This is a tag"
tag_content="$tag_header_without_timestamp 0000000000 +0000
$tag_description"
mktag: use fsck instead of custom verify_tag() Change the validation logic in "mktag" to use fsck's fsck_tag() instead of its own custom parser. Curiously the logic for both dates back to the same commit[1]. Let's unify them so we're not maintaining two sets functions to verify that a tag is OK. The behavior of fsck_tag() and the old "mktag" code being removed here is different in few aspects. I think it makes sense to remove some of those checks, namely: A. fsck only cares that the timezone matches [-+][0-9]{4}. The mktag code disallowed values larger than 1400. Yes there's currently no timezone with a greater offset[2], but since we allow any number of non-offical timezones (e.g. +1234) passing this through seems fine. Git also won't break in the future if e.g. French Polynesia decides it needs to outdo the Line Islands when it comes to timezone extravagance. B. fsck allows missing author names such as "tagger <email>", mktag wouldn't, but would allow e.g. "tagger [2 spaces] <email>" (but not "tagger [1 space] <email>"). Now we allow all of these. C. Like B, but "mktag" disallowed spaces in the <email> part, fsck allows it. In some ways fsck_tag() is stricter than "mktag" was, namely: D. fsck disallows zero-padded dates, but mktag didn't care. So e.g. the timestamp "0000000000 +0000" produces an error now. A test in "t1006-cat-file.sh" relied on this, it's been changed to use "hash-object" (without fsck) instead. There was one check I deemed worth keeping by porting it over to fsck_tag(): E. "mktag" did not allow any custom headers, and by extension (as an empty commit is allowed) also forbade an extra stray trailing newline after the headers it knew about. Add a new check in the "ignore" category to fsck and use it. This somewhat abuses the facility added in efaba7cc77f (fsck: optionally ignore specific fsck issues completely, 2015-06-22). This is somewhat of hack, but probably the least invasive change we can make here. The fsck command will shuffle these categories around, e.g. under --strict the "info" becomes a "warn" and "warn" becomes "error". Existing users of fsck's (and others, e.g. index-pack) --strict option rely on this. So we need to put something into a category that'll be ignored by all existing users of the API. Pretending that fsck.extraHeaderEntry=error ("ignore" by default) was set serves to do this for us. 1. ec4465adb38 (Add "tag" objects that can be used to sign other objects., 2005-04-25) 2. https://en.wikipedia.org/wiki/List_of_UTC_time_offsets Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-01-05 19:42:46 +00:00
tag_sha1=$(echo_without_newline "$tag_content" | git hash-object -t tag --stdin -w)
tag_size=$(strlen "$tag_content")
cat-file: print tags raw for "cat-file -p" When "cat-file -p" prints commits, it shows them in their raw format, since git's format is already human-readable. For tags, however, we print the whole thing raw except for one thing: we convert the timestamp on the tagger line into a human-readable date. This dates all the way back to a0f15fa (Pretty-print tagger dates, 2006-03-01). At that time there was no other way to pretty-print a tag. These days, however, neither of those matters much. The normal way to pretty-print a tag is with "git show", which is much more flexible than "cat-file -p". Commit a0f15fa also built "verify-tag --verbose" (and subsequently "tag -v") around the "cat-file -p" output. However, that behavior was lost in commit 62e09ce (Make git tag a builtin, 2007-07-20), and we went back to printing the raw tag contents. Nobody seems to have noticed the bug since then (and it is arguably a saner behavior anyway, as it shows the actual bytes for which we verified the signature). Let's drop the tagger-date formatting for "cat-file -p". It makes us more consistent with cat-file's commit pretty-printer, and as a bonus, we can drop the hand-rolled tag parsing code in cat-file (which happened to behave inconsistently with the tag pretty-printing code elsewhere). This is a change of output format, so it's possible that some callers could considered this a regression. However, the original behavior was arguably a bug (due to the inconsistency with commits), likely nobody was relying on it (even we do not use it ourselves these days), and anyone relying on the "-p" pretty-printer should be able to expect a change in the output format (i.e., while "cat-file" is plumbing, the output format of "-p" was never guaranteed to be stable). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-17 21:00:48 +00:00
run_tests 'tag' $tag_sha1 $tag_size "$tag_content" "$tag_content" 1
test_expect_success \
"Reach a blob from a tag pointing to it" \
"test '$hello_content' = \"\$(git cat-file blob $tag_sha1)\""
cat-file: add --batch-command mode Add a new flag --batch-command that accepts commands and arguments from stdin, similar to git-update-ref --stdin. At GitLab, we use a pair of long running cat-file processes when accessing object content. One for iterating over object metadata with --batch-check, and the other to grab object contents with --batch. However, if we had --batch-command, we wouldn't need to keep both processes around, and instead just have one --batch-command process where we can flip between getting object info, and getting object contents. Since we have a pair of cat-file processes per repository, this means we can get rid of roughly half of long lived git cat-file processes. Given there are many repositories being accessed at any given time, this can lead to huge savings. git cat-file --batch-command will enter an interactive command mode whereby the user can enter in commands and their arguments that get queued in memory: <command1> [arg1] [arg2] LF <command2> [arg1] [arg2] LF When --buffer mode is used, commands will be queued in memory until a flush command is issued that execute them: flush LF The reason for a flush command is that when a consumer process (A) talks to a git cat-file process (B) and interactively writes to and reads from it in --buffer mode, (A) needs to be able to control when the buffer is flushed to stdout. Currently, from (A)'s perspective, the only way is to either 1. kill (B)'s process 2. send an invalid object to stdin. 1. is not ideal from a performance perspective as it will require spawning a new cat-file process each time, and 2. is hacky and not a good long term solution. With this mechanism of queueing up commands and letting (A) issue a flush command, process (A) can control when the buffer is flushed and can guarantee it will receive all of the output when in --buffer mode. --batch-command also will not allow (B) to flush to stdout until a flush is received. This patch adds the basic structure for adding command which can be extended in the future to add more commands. It also adds the following two commands (on top of the flush command): contents <object> LF info <object> LF The contents command takes an <object> argument and prints out the object contents. The info command takes an <object> argument and prints out the object metadata. These can be used in the following way with --buffer: info <object> LF contents <object> LF contents <object> LF info <object> LF flush LF info <object> LF flush LF When used without --buffer: info <object> LF contents <object> LF contents <object> LF info <object> LF info <object> LF Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: John Cai <johncai86@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-02-18 18:23:14 +00:00
for batch in batch batch-check batch-command
do
for opt in t s e p
do
test_expect_success "Passing -$opt with --$batch fails" '
test_must_fail git cat-file --$batch -$opt $hello_sha1
'
test_expect_success "Passing --$batch with -$opt fails" '
test_must_fail git cat-file -$opt --$batch $hello_sha1
'
done
test_expect_success "Passing <type> with --$batch fails" '
test_must_fail git cat-file --$batch blob $hello_sha1
'
test_expect_success "Passing --$batch with <type> fails" '
test_must_fail git cat-file blob --$batch $hello_sha1
'
test_expect_success "Passing sha1 with --$batch fails" '
test_must_fail git cat-file --$batch $hello_sha1
'
done
for opt in t s e p
do
test_expect_success "Passing -$opt with --follow-symlinks fails" '
test_must_fail git cat-file --follow-symlinks -$opt $hello_sha1
'
done
test_expect_success "--batch-check for a non-existent named object" '
test "foobar42 missing
foobar84 missing" = \
"$( ( echo foobar42 && echo_without_newline foobar84 ) | git cat-file --batch-check)"
'
test_expect_success "--batch-check for a non-existent hash" '
test "0000000000000000000000000000000000000042 missing
0000000000000000000000000000000000000084 missing" = \
"$( ( echo 0000000000000000000000000000000000000042 &&
echo_without_newline 0000000000000000000000000000000000000084 ) |
git cat-file --batch-check)"
'
test_expect_success "--batch for an existent and a non-existent hash" '
test "$tag_sha1 tag $tag_size
$tag_content
0000000000000000000000000000000000000000 missing" = \
"$( ( echo $tag_sha1 &&
echo_without_newline 0000000000000000000000000000000000000000 ) |
git cat-file --batch)"
'
test_expect_success "--batch-check for an empty line" '
test " missing" = "$(echo | git cat-file --batch-check)"
'
test_expect_success 'empty --batch-check notices missing object' '
echo "$ZERO_OID missing" >expect &&
echo "$ZERO_OID" | git cat-file --batch-check="" >actual &&
test_cmp expect actual
'
batch_input="$hello_sha1
$commit_sha1
$tag_sha1
deadbeef
"
batch_output="$hello_sha1 blob $hello_size
$hello_content
$commit_sha1 commit $commit_size
$commit_content
$tag_sha1 tag $tag_size
$tag_content
deadbeef missing
missing"
test_expect_success '--batch with multiple sha1s gives correct format' '
test "$(maybe_remove_timestamp "$batch_output" 1)" = "$(maybe_remove_timestamp "$(echo_without_newline "$batch_input" | git cat-file --batch)" 1)"
'
batch_check_input="$hello_sha1
$tree_sha1
$commit_sha1
$tag_sha1
deadbeef
"
batch_check_output="$hello_sha1 blob $hello_size
$tree_sha1 tree $tree_size
$commit_sha1 commit $commit_size
$tag_sha1 tag $tag_size
deadbeef missing
missing"
test_expect_success "--batch-check with multiple sha1s gives correct format" '
test "$batch_check_output" = \
"$(echo_without_newline "$batch_check_input" | git cat-file --batch-check)"
'
cat-file: add --batch-command mode Add a new flag --batch-command that accepts commands and arguments from stdin, similar to git-update-ref --stdin. At GitLab, we use a pair of long running cat-file processes when accessing object content. One for iterating over object metadata with --batch-check, and the other to grab object contents with --batch. However, if we had --batch-command, we wouldn't need to keep both processes around, and instead just have one --batch-command process where we can flip between getting object info, and getting object contents. Since we have a pair of cat-file processes per repository, this means we can get rid of roughly half of long lived git cat-file processes. Given there are many repositories being accessed at any given time, this can lead to huge savings. git cat-file --batch-command will enter an interactive command mode whereby the user can enter in commands and their arguments that get queued in memory: <command1> [arg1] [arg2] LF <command2> [arg1] [arg2] LF When --buffer mode is used, commands will be queued in memory until a flush command is issued that execute them: flush LF The reason for a flush command is that when a consumer process (A) talks to a git cat-file process (B) and interactively writes to and reads from it in --buffer mode, (A) needs to be able to control when the buffer is flushed to stdout. Currently, from (A)'s perspective, the only way is to either 1. kill (B)'s process 2. send an invalid object to stdin. 1. is not ideal from a performance perspective as it will require spawning a new cat-file process each time, and 2. is hacky and not a good long term solution. With this mechanism of queueing up commands and letting (A) issue a flush command, process (A) can control when the buffer is flushed and can guarantee it will receive all of the output when in --buffer mode. --batch-command also will not allow (B) to flush to stdout until a flush is received. This patch adds the basic structure for adding command which can be extended in the future to add more commands. It also adds the following two commands (on top of the flush command): contents <object> LF info <object> LF The contents command takes an <object> argument and prints out the object contents. The info command takes an <object> argument and prints out the object metadata. These can be used in the following way with --buffer: info <object> LF contents <object> LF contents <object> LF info <object> LF flush LF info <object> LF flush LF When used without --buffer: info <object> LF contents <object> LF contents <object> LF info <object> LF info <object> LF Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: John Cai <johncai86@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-02-18 18:23:14 +00:00
test_expect_success '--batch-command with multiple info calls gives correct format' '
cat >expect <<-EOF &&
$hello_sha1 blob $hello_size
$tree_sha1 tree $tree_size
$commit_sha1 commit $commit_size
$tag_sha1 tag $tag_size
deadbeef missing
EOF
git cat-file --batch-command --buffer >actual <<-EOF &&
info $hello_sha1
info $tree_sha1
info $commit_sha1
info $tag_sha1
info deadbeef
EOF
test_cmp expect actual
'
test_expect_success '--batch-command with multiple command calls gives correct format' '
remove_timestamp >expect <<-EOF &&
$hello_sha1 blob $hello_size
$hello_content
$commit_sha1 commit $commit_size
$commit_content
$tag_sha1 tag $tag_size
$tag_content
deadbeef missing
EOF
git cat-file --batch-command --buffer >actual_raw <<-EOF &&
contents $hello_sha1
contents $commit_sha1
contents $tag_sha1
contents deadbeef
flush
EOF
remove_timestamp <actual_raw >actual &&
test_cmp expect actual
'
test_expect_success 'setup blobs which are likely to delta' '
test-tool genrandom foo 10240 >foo &&
{ cat foo && echo plus; } >foo-plus &&
git add foo foo-plus &&
git commit -m foo &&
cat >blobs <<-\EOF
HEAD:foo
HEAD:foo-plus
EOF
'
test_expect_success 'confirm that neither loose blob is a delta' '
cat >expect <<-EOF &&
$ZERO_OID
$ZERO_OID
EOF
git cat-file --batch-check="%(deltabase)" <blobs >actual &&
test_cmp expect actual
'
# To avoid relying too much on the current delta heuristics,
# we will check only that one of the two objects is a delta
# against the other, but not the order. We can do so by just
# asking for the base of both, and checking whether either
# sha1 appears in the output.
test_expect_success '%(deltabase) reports packed delta bases' '
git repack -ad &&
git cat-file --batch-check="%(deltabase)" <blobs >actual &&
{
grep "$(git rev-parse HEAD:foo)" actual ||
grep "$(git rev-parse HEAD:foo-plus)" actual
}
'
test_expect_success 'setup bogus data' '
bogus_short_type="bogus" &&
bogus_short_content="bogus" &&
bogus_short_size=$(strlen "$bogus_short_content") &&
bogus_short_sha1=$(echo_without_newline "$bogus_short_content" | git hash-object -t $bogus_short_type --literally -w --stdin) &&
bogus_long_type="abcdefghijklmnopqrstuvwxyz1234679" &&
bogus_long_content="bogus" &&
bogus_long_size=$(strlen "$bogus_long_content") &&
bogus_long_sha1=$(echo_without_newline "$bogus_long_content" | git hash-object -t $bogus_long_type --literally -w --stdin)
'
for arg1 in '' --allow-unknown-type
do
for arg2 in -s -t -p
do
if test "$arg1" = "--allow-unknown-type" && test "$arg2" = "-p"
then
continue
fi
test_expect_success "cat-file $arg1 $arg2 error on bogus short OID" '
cat >expect <<-\EOF &&
fatal: invalid object type
EOF
if test "$arg1" = "--allow-unknown-type"
then
git cat-file $arg1 $arg2 $bogus_short_sha1
else
test_must_fail git cat-file $arg1 $arg2 $bogus_short_sha1 >out 2>actual &&
test_must_be_empty out &&
test_cmp expect actual
fi
'
test_expect_success "cat-file $arg1 $arg2 error on bogus full OID" '
if test "$arg2" = "-p"
then
cat >expect <<-EOF
error: header for $bogus_long_sha1 too long, exceeds 32 bytes
fatal: Not a valid object name $bogus_long_sha1
EOF
else
cat >expect <<-EOF
error: header for $bogus_long_sha1 too long, exceeds 32 bytes
fatal: git cat-file: could not get object info
EOF
fi &&
if test "$arg1" = "--allow-unknown-type"
then
git cat-file $arg1 $arg2 $bogus_short_sha1
else
test_must_fail git cat-file $arg1 $arg2 $bogus_long_sha1 >out 2>actual &&
test_must_be_empty out &&
test_cmp expect actual
fi
'
test_expect_success "cat-file $arg1 $arg2 error on missing short OID" '
cat >expect.err <<-EOF &&
fatal: Not a valid object name $(test_oid deadbeef_short)
EOF
test_must_fail git cat-file $arg1 $arg2 $(test_oid deadbeef_short) >out 2>err.actual &&
test_must_be_empty out
'
test_expect_success "cat-file $arg1 $arg2 error on missing full OID" '
if test "$arg2" = "-p"
then
cat >expect.err <<-EOF
fatal: Not a valid object name $(test_oid deadbeef)
EOF
else
cat >expect.err <<-\EOF
fatal: git cat-file: could not get object info
EOF
fi &&
test_must_fail git cat-file $arg1 $arg2 $(test_oid deadbeef) >out 2>err.actual &&
test_must_be_empty out &&
test_cmp expect.err err.actual
'
done
done
test_expect_success '-e is OK with a broken object without --allow-unknown-type' '
git cat-file -e $bogus_short_sha1
'
test_expect_success '-e can not be combined with --allow-unknown-type' '
test_expect_code 128 git cat-file -e --allow-unknown-type $bogus_short_sha1
'
test_expect_success '-p cannot print a broken object even with --allow-unknown-type' '
test_must_fail git cat-file -p $bogus_short_sha1 &&
test_expect_code 128 git cat-file -p --allow-unknown-type $bogus_short_sha1
'
test_expect_success '<type> <hash> does not work with objects of broken types' '
cat >err.expect <<-\EOF &&
fatal: invalid object type "bogus"
EOF
test_must_fail git cat-file $bogus_short_type $bogus_short_sha1 2>err.actual &&
test_cmp err.expect err.actual
'
test_expect_success 'broken types combined with --batch and --batch-check' '
echo $bogus_short_sha1 >bogus-oid &&
cat >err.expect <<-\EOF &&
fatal: invalid object type
EOF
test_must_fail git cat-file --batch <bogus-oid 2>err.actual &&
test_cmp err.expect err.actual &&
test_must_fail git cat-file --batch-check <bogus-oid 2>err.actual &&
test_cmp err.expect err.actual
'
test_expect_success 'the --batch and --batch-check options do not combine with --allow-unknown-type' '
test_expect_code 128 git cat-file --batch --allow-unknown-type <bogus-oid &&
test_expect_code 128 git cat-file --batch-check --allow-unknown-type <bogus-oid
'
test_expect_success 'the --allow-unknown-type option does not consider replacement refs' '
cat >expect <<-EOF &&
$bogus_short_type
EOF
git cat-file -t --allow-unknown-type $bogus_short_sha1 >actual &&
test_cmp expect actual &&
# Create it manually, as "git replace" will die on bogus
# types.
head=$(git rev-parse --verify HEAD) &&
test_when_finished "test-tool ref-store main delete-refs 0 msg refs/replace/$bogus_short_sha1" &&
test-tool ref-store main update-ref msg "refs/replace/$bogus_short_sha1" $head $ZERO_OID REF_SKIP_OID_VERIFICATION &&
cat >expect <<-EOF &&
commit
EOF
git cat-file -t --allow-unknown-type $bogus_short_sha1 >actual &&
test_cmp expect actual
'
test_expect_success "Type of broken object is correct" '
echo $bogus_short_type >expect &&
git cat-file -t --allow-unknown-type $bogus_short_sha1 >actual &&
test_cmp expect actual
'
test_expect_success "Size of broken object is correct" '
echo $bogus_short_size >expect &&
git cat-file -s --allow-unknown-type $bogus_short_sha1 >actual &&
test_cmp expect actual
'
test_expect_success 'clean up broken object' '
rm .git/objects/$(test_oid_to_path $bogus_short_sha1)
'
test_expect_success "Type of broken object is correct when type is large" '
echo $bogus_long_type >expect &&
git cat-file -t --allow-unknown-type $bogus_long_sha1 >actual &&
test_cmp expect actual
'
test_expect_success "Size of large broken object is correct when type is large" '
echo $bogus_long_size >expect &&
git cat-file -s --allow-unknown-type $bogus_long_sha1 >actual &&
test_cmp expect actual
'
test_expect_success 'clean up broken object' '
rm .git/objects/$(test_oid_to_path $bogus_long_sha1)
'
test_expect_success 'cat-file -t and -s on corrupt loose object' '
git init --bare corrupt-loose.git &&
(
cd corrupt-loose.git &&
# Setup and create the empty blob and its path
empty_path=$(git rev-parse --git-path objects/$(test_oid_to_path "$EMPTY_BLOB")) &&
git hash-object -w --stdin </dev/null &&
# Create another blob and its path
echo other >other.blob &&
other_blob=$(git hash-object -w --stdin <other.blob) &&
other_path=$(git rev-parse --git-path objects/$(test_oid_to_path "$other_blob")) &&
# Before the swap the size is 0
cat >out.expect <<-EOF &&
0
EOF
git cat-file -s "$EMPTY_BLOB" >out.actual 2>err.actual &&
test_must_be_empty err.actual &&
test_cmp out.expect out.actual &&
# Swap the two to corrupt the repository
mv -f "$other_path" "$empty_path" &&
test_must_fail git fsck 2>err.fsck &&
fsck: report invalid object type-path combinations Improve the error that's emitted in cases where we find a loose object we parse, but which isn't at the location we expect it to be. Before this change we'd prefix the error with a not-a-OID derived from the path at which the object was found, due to an emergent behavior in how we'd end up with an "OID" in these codepaths. Now we'll instead say what object we hashed, and what path it was found at. Before this patch series e.g.: $ git hash-object --stdin -w -t blob </dev/null e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 $ mv objects/e6/ objects/e7 Would emit ("[...]" used to abbreviate the OIDs): git fsck error: hash mismatch for ./objects/e7/9d[...] (expected e79d[...]) error: e79d[...]: object corrupt or missing: ./objects/e7/9d[...] Now we'll instead emit: error: e69d[...]: hash-path mismatch, found at: ./objects/e7/9d[...] Furthermore, we'll do the right thing when the object type and its location are bad. I.e. this case: $ git hash-object --stdin -w -t garbage --literally </dev/null 8315a83d2acc4c174aed59430f9a9c4ed926440f $ mv objects/83 objects/84 As noted in an earlier commits we'd simply die early in those cases, until preceding commits fixed the hard die on invalid object type: $ git fsck fatal: invalid object type Now we'll instead emit sensible error messages: $ git fsck error: 8315[...]: hash-path mismatch, found at: ./objects/84/15[...] error: 8315[...]: object is of unknown type 'garbage': ./objects/84/15[...] In both fsck.c and object-file.c we're using null_oid as a sentinel value for checking whether we got far enough to be certain that the issue was indeed this OID mismatch. We need to add the "object corrupt or missing" special-case to deal with cases where read_loose_object() will return an error before completing check_object_signature(), e.g. if we have an error in unpack_loose_rest() because we find garbage after the valid gzip content: $ git hash-object --stdin -w -t blob </dev/null e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 $ chmod 755 objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391 $ echo garbage >>objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391 $ git fsck error: garbage at end of loose object 'e69d[...]' error: unable to unpack contents of ./objects/e6/9d[...] error: e69d[...]: object corrupt or missing: ./objects/e6/9d[...] There is currently some weird messaging in the edge case when the two are combined, i.e. because we're not explicitly passing along an error state about this specific scenario from check_stream_oid() via read_loose_object() we'll end up printing the null OID if an object is of an unknown type *and* it can't be unpacked by zlib, e.g.: $ git hash-object --stdin -w -t garbage --literally </dev/null 8315a83d2acc4c174aed59430f9a9c4ed926440f $ chmod 755 objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f $ echo garbage >>objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f $ /usr/bin/git fsck fatal: invalid object type $ ~/g/git/git fsck error: garbage at end of loose object '8315a83d2acc4c174aed59430f9a9c4ed926440f' error: unable to unpack contents of ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f error: 8315a83d2acc4c174aed59430f9a9c4ed926440f: object corrupt or missing: ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f error: 0000000000000000000000000000000000000000: object is of unknown type 'garbage': ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f [...] I think it's OK to leave that for future improvements, which would involve enum-ifying more error state as we've done with "enum unpack_loose_header_result" in preceding commits. In these increasingly more obscure cases the worst that can happen is that we'll get slightly nonsensical or inapplicable error messages. There's other such potential edge cases, all of which might produce some confusing messaging, but still be handled correctly as far as passing along errors goes. E.g. if check_object_signature() returns and oideq(real_oid, null_oid()) is true, which could happen if it returns -1 due to the read_istream() call having failed. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-01 09:16:53 +00:00
grep "hash-path mismatch" err.fsck &&
# confirm that cat-file is reading the new swapped-in
# blob...
cat >out.expect <<-EOF &&
blob
EOF
git cat-file -t "$EMPTY_BLOB" >out.actual 2>err.actual &&
test_must_be_empty err.actual &&
test_cmp out.expect out.actual &&
# ... since it has a different size now.
cat >out.expect <<-EOF &&
6
EOF
git cat-file -s "$EMPTY_BLOB" >out.actual 2>err.actual &&
test_must_be_empty err.actual &&
test_cmp out.expect out.actual &&
# So far "cat-file" has been happy to spew the found
# content out as-is. Try to make it zlib-invalid.
mv -f other.blob "$empty_path" &&
test_must_fail git fsck 2>err.fsck &&
grep "^error: inflate: data stream error (" err.fsck
)
'
# Tests for git cat-file --follow-symlinks
test_expect_success 'prep for symlink tests' '
echo_without_newline "$hello_content" >morx &&
test_ln_s_add morx same-dir-link &&
test_ln_s_add dir link-to-dir &&
test_ln_s_add ../fleem out-of-repo-link &&
test_ln_s_add .. out-of-repo-link-dir &&
test_ln_s_add same-dir-link link-to-link &&
test_ln_s_add nope broken-same-dir-link &&
mkdir dir &&
test_ln_s_add ../morx dir/parent-dir-link &&
test_ln_s_add .. dir/link-dir &&
test_ln_s_add ../../escape dir/out-of-repo-link &&
test_ln_s_add ../.. dir/out-of-repo-link-dir &&
test_ln_s_add nope dir/broken-link-in-dir &&
mkdir dir/subdir &&
test_ln_s_add ../../morx dir/subdir/grandparent-dir-link &&
test_ln_s_add ../../../great-escape dir/subdir/out-of-repo-link &&
test_ln_s_add ../../.. dir/subdir/out-of-repo-link-dir &&
test_ln_s_add ../../../ dir/subdir/out-of-repo-link-dir-trailing &&
test_ln_s_add ../parent-dir-link dir/subdir/parent-dir-link-to-link &&
echo_without_newline "$hello_content" >dir/subdir/ind2 &&
echo_without_newline "$hello_content" >dir/ind1 &&
test_ln_s_add dir dirlink &&
test_ln_s_add dir/subdir subdirlink &&
test_ln_s_add subdir/ind2 dir/link-to-child &&
test_ln_s_add dir/link-to-child link-to-down-link &&
test_ln_s_add dir/.. up-down &&
test_ln_s_add dir/../ up-down-trailing &&
test_ln_s_add dir/../morx up-down-file &&
test_ln_s_add dir/../../morx up-up-down-file &&
test_ln_s_add subdirlink/../../morx up-two-down-file &&
test_ln_s_add loop1 loop2 &&
test_ln_s_add loop2 loop1 &&
git add morx dir/subdir/ind2 dir/ind1 &&
git commit -am "test" &&
echo $hello_sha1 blob $hello_size >found
'
test_expect_success 'git cat-file --batch-check --follow-symlinks works for non-links' '
echo HEAD:morx | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp found actual &&
echo HEAD:nope missing >expect &&
echo HEAD:nope | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual
'
test_expect_success 'git cat-file --batch-check --follow-symlinks works for in-repo, same-dir links' '
echo HEAD:same-dir-link | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp found actual
'
test_expect_success 'git cat-file --batch-check --follow-symlinks works for in-repo, links to dirs' '
echo HEAD:link-to-dir/ind1 | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp found actual
'
test_expect_success 'git cat-file --batch-check --follow-symlinks works for broken in-repo, same-dir links' '
echo dangling 25 >expect &&
echo HEAD:broken-same-dir-link >>expect &&
echo HEAD:broken-same-dir-link | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual
'
test_expect_success 'git cat-file --batch-check --follow-symlinks works for same-dir links-to-links' '
echo HEAD:link-to-link | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp found actual
'
test_expect_success 'git cat-file --batch-check --follow-symlinks works for parent-dir links' '
echo HEAD:dir/parent-dir-link | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp found actual &&
echo notdir 29 >expect &&
echo HEAD:dir/parent-dir-link/nope >>expect &&
echo HEAD:dir/parent-dir-link/nope | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual
'
test_expect_success 'git cat-file --batch-check --follow-symlinks works for .. links' '
echo dangling 22 >expect &&
echo HEAD:dir/link-dir/nope >>expect &&
echo HEAD:dir/link-dir/nope | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual &&
echo HEAD:dir/link-dir/morx | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp found actual &&
echo dangling 27 >expect &&
echo HEAD:dir/broken-link-in-dir >>expect &&
echo HEAD:dir/broken-link-in-dir | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual
'
test_expect_success 'git cat-file --batch-check --follow-symlinks works for ../.. links' '
echo notdir 41 >expect &&
echo HEAD:dir/subdir/grandparent-dir-link/nope >>expect &&
echo HEAD:dir/subdir/grandparent-dir-link/nope | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual &&
echo HEAD:dir/subdir/grandparent-dir-link | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp found actual &&
echo HEAD:dir/subdir/parent-dir-link-to-link | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp found actual
'
test_expect_success 'git cat-file --batch-check --follow-symlinks works for dir/ links' '
echo dangling 17 >expect &&
echo HEAD:dirlink/morx >>expect &&
echo HEAD:dirlink/morx | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual &&
echo $hello_sha1 blob $hello_size >expect &&
echo HEAD:dirlink/ind1 | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual
'
test_expect_success 'git cat-file --batch-check --follow-symlinks works for dir/subdir links' '
echo dangling 20 >expect &&
echo HEAD:subdirlink/morx >>expect &&
echo HEAD:subdirlink/morx | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual &&
echo HEAD:subdirlink/ind2 | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp found actual
'
test_expect_success 'git cat-file --batch-check --follow-symlinks works for dir ->subdir links' '
echo notdir 27 >expect &&
echo HEAD:dir/link-to-child/morx >>expect &&
echo HEAD:dir/link-to-child/morx | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual &&
echo HEAD:dir/link-to-child | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp found actual &&
echo HEAD:link-to-down-link | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp found actual
'
test_expect_success 'git cat-file --batch-check --follow-symlinks works for out-of-repo symlinks' '
echo symlink 8 >expect &&
echo ../fleem >>expect &&
echo HEAD:out-of-repo-link | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual &&
echo symlink 2 >expect &&
echo .. >>expect &&
echo HEAD:out-of-repo-link-dir | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual
'
test_expect_success 'git cat-file --batch-check --follow-symlinks works for out-of-repo symlinks in dirs' '
echo symlink 9 >expect &&
echo ../escape >>expect &&
echo HEAD:dir/out-of-repo-link | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual &&
echo symlink 2 >expect &&
echo .. >>expect &&
echo HEAD:dir/out-of-repo-link-dir | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual
'
test_expect_success 'git cat-file --batch-check --follow-symlinks works for out-of-repo symlinks in subdirs' '
echo symlink 15 >expect &&
echo ../great-escape >>expect &&
echo HEAD:dir/subdir/out-of-repo-link | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual &&
echo symlink 2 >expect &&
echo .. >>expect &&
echo HEAD:dir/subdir/out-of-repo-link-dir | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual &&
echo symlink 3 >expect &&
echo ../ >>expect &&
echo HEAD:dir/subdir/out-of-repo-link-dir-trailing | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual
'
test_expect_success 'git cat-file --batch-check --follow-symlinks works for symlinks with internal ..' '
echo HEAD: | git cat-file --batch-check >expect &&
echo HEAD:up-down | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual &&
echo HEAD:up-down-trailing | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual &&
echo HEAD:up-down-file | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp found actual &&
echo symlink 7 >expect &&
echo ../morx >>expect &&
echo HEAD:up-up-down-file | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual &&
echo HEAD:up-two-down-file | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp found actual
'
test_expect_success 'git cat-file --batch-check --follow-symlink breaks loops' '
echo loop 10 >expect &&
echo HEAD:loop1 >>expect &&
echo HEAD:loop1 | git cat-file --batch-check --follow-symlinks >actual &&
test_cmp expect actual
'
test_expect_success 'git cat-file --batch --follow-symlink returns correct sha and mode' '
echo HEAD:morx | git cat-file --batch >expect &&
echo HEAD:morx | git cat-file --batch --follow-symlinks >actual &&
test_cmp expect actual
'
2015-06-22 10:45:59 +00:00
test_expect_success 'cat-file --batch-all-objects shows all objects' '
# make new repos so we know the full set of objects; we will
2015-06-22 10:45:59 +00:00
# also make sure that there are some packed and some loose
# objects, some referenced and some not, some duplicates, and that
# there are some available only via alternates.
2015-06-22 10:45:59 +00:00
git init all-one &&
(
cd all-one &&
echo content >file &&
git add file &&
git commit -qm base &&
git rev-parse HEAD HEAD^{tree} HEAD:file &&
git repack -ad &&
echo not-cloned | git hash-object -w --stdin
) >expect.unsorted &&
git clone -s all-one all-two &&
(
cd all-two &&
echo local-unref | git hash-object -w --stdin
) >>expect.unsorted &&
git -C all-two rev-parse HEAD:file |
git -C all-two pack-objects .git/objects/pack/pack &&
2015-06-22 10:45:59 +00:00
sort <expect.unsorted >expect &&
git -C all-two cat-file --batch-all-objects \
--batch-check="%(objectname)" >actual &&
2015-06-22 10:45:59 +00:00
test_cmp expect actual
'
cat-file: support "unordered" output for --batch-all-objects If you're going to access the contents of every object in a packfile, it's generally much more efficient to do so in pack order, rather than in hash order. That increases the locality of access within the packfile, which in turn is friendlier to the delta base cache, since the packfile puts related deltas next to each other. By contrast, hash order is effectively random, since the sha1 has no discernible relationship to the content. This patch introduces an "--unordered" option to cat-file which iterates over packs in pack-order under the hood. You can see the results when dumping all of the file content: $ time ./git cat-file --batch-all-objects --buffer --batch | wc -c 6883195596 real 0m44.491s user 0m42.902s sys 0m5.230s $ time ./git cat-file --unordered \ --batch-all-objects --buffer --batch | wc -c 6883195596 real 0m6.075s user 0m4.774s sys 0m3.548s Same output, different order, way faster. The same speed-up applies even if you end up accessing the object content in a different process, like: git cat-file --batch-all-objects --buffer --batch-check | grep blob | git cat-file --batch='%(objectname) %(rest)' | wc -c Adding "--unordered" to the first command drops the runtime in git.git from 24s to 3.5s. Side note: there are actually further speedups available for doing it all in-process now. Since we are outputting the object content during the actual pack iteration, we know where to find the object and could skip the extra lookup done by oid_object_info(). This patch stops short of that optimization since the underlying API isn't ready for us to make those sorts of direct requests. So if --unordered is so much better, why not make it the default? Two reasons: 1. We've promised in the documentation that --batch-all-objects outputs in hash order. Since cat-file is plumbing, people may be relying on that default, and we can't change it. 2. It's actually _slower_ for some cases. We have to compute the pack revindex to walk in pack order. And our de-duplication step uses an oidset, rather than a sort-and-dedup, which can end up being more expensive. If we're just accessing the type and size of each object, for example, like: git cat-file --batch-all-objects --buffer --batch-check my best-of-five warm cache timings go from 900ms to 1100ms using --unordered. Though it's possible in a cold-cache or under memory pressure that we could do better, since we'd have better locality within the packfile. And one final question: why is it "--unordered" and not "--pack-order"? The answer is again two-fold: 1. "pack order" isn't a well-defined thing across the whole set of objects. We're hitting loose objects, as well as objects in multiple packs, and the only ordering we're promising is _within_ a single pack. The rest is apparently random. 2. The point here is optimization. So we don't want to promise any particular ordering, but only to say that we will choose an ordering which is likely to be efficient for accessing the object content. That leaves the door open for further changes in the future without having to add another compatibility option. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-10 23:24:57 +00:00
# The only user-visible difference is that the objects are no longer sorted,
# and the resulting sort order is undefined. So we can only check that it
# produces the same objects as the ordered case, but that at least exercises
# the code.
test_expect_success 'cat-file --unordered works' '
git -C all-two cat-file --batch-all-objects --unordered \
--batch-check="%(objectname)" >actual.unsorted &&
sort <actual.unsorted >actual &&
test_cmp expect actual
'
test_expect_success 'set up object list for --batch-all-objects tests' '
git -C all-two cat-file --batch-all-objects --batch-check="%(objectname)" >objects
'
test_expect_success 'cat-file --batch="%(objectname)" with --batch-all-objects will work' '
git -C all-two cat-file --batch="%(objectname)" <objects >expect &&
git -C all-two cat-file --batch-all-objects --batch="%(objectname)" >actual &&
cmp expect actual
'
test_expect_success 'cat-file --batch="%(rest)" with --batch-all-objects will work' '
git -C all-two cat-file --batch="%(rest)" <objects >expect &&
git -C all-two cat-file --batch-all-objects --batch="%(rest)" >actual &&
cmp expect actual
'
test_expect_success 'cat-file --batch="batman" with --batch-all-objects will work' '
git -C all-two cat-file --batch="batman" <objects >expect &&
git -C all-two cat-file --batch-all-objects --batch="batman" >actual &&
cmp expect actual
'
cat-file: disable refs/replace with --batch-all-objects When we're enumerating all objects in the object database, it doesn't make sense to respect refs/replace. The point of this option is to enumerate all of the objects in the database at a low level. By definition we'd already show the replacement object's contents (under its real oid), and showing those contents under another oid is almost certainly working against what the user is trying to do. Note that you could make the same argument for something like: git show-index <foo.idx | awk '{print $2}' | git cat-file --batch but there we can't know in cat-file exactly what the user intended, because we don't know the source of the input. They could be trying to do low-level debugging, or they could be doing something more high-level (e.g., imagine a porcelain built around cat-file for its object accesses). So in those cases, we'll have to rely on the user specifying "git --no-replace-objects" to tell us what to do. One _could_ make an argument that "cat-file --batch" is sufficiently low-level plumbing that it should not respect replace-objects at all (and the caller should do any replacement if they want it). But we have been doing so for some time. The history is a little tangled: - looking back as far as v1.6.6, we would not respect replace refs for --batch-check, but would for --batch (because the former used sha1_object_info(), and the replace mechanism only affected actual object reads) - this discrepancy was made even weirder by 98e2092b50 (cat-file: teach --batch to stream blob objects, 2013-07-10), where we always output the header using the --batch-check code, and then printed the object separately. This could lead to "cat-file --batch" dying (when it notices the size or type changed for a non-blob object) or even producing bogus output (in streaming mode, we didn't notice that we wrote the wrong number of bytes). - that persisted until 1f7117ef7a (sha1_file: perform object replacement in sha1_object_info_extended(), 2013-12-11), which then respected replace refs for both forms. So it has worked reliably this way for over 7 years, and we should make sure it continues to do so. That could also be an argument that --batch-all-objects should not change behavior (which this patch is doing), but I really consider the current behavior to be an unintended bug. It's a side effect of how the code is implemented (feeding the oids back into oid_object_info() rather than looking at what we found while reading the loose and packed object storage). The implementation is straight-forward: we just disable the global read_replace_refs flag when we're in --batch-all-objects mode. It would perhaps be a little cleaner to change the flag we pass to oid_object_info_extended(), but that's not enough. We also read objects via read_object_file() and stream_blob_to_fd(). The former could switch to its _extended() form, but the streaming code has no mechanism for disabling replace refs. Setting the global flag works, and as a bonus, it's impossible to have any "oops, we're sometimes replacing the object and sometimes not" bugs in the output (like the ones caused by 98e2092b50 above). The tests here cover the regular-input and --batch-all-objects cases, for both --batch-check and --batch. There is a test in t6050 that covers the regular-input case with --batch already, but this new one goes much further in actually verifying the output (plus covering --batch-check explicitly). This is perhaps a little overkill and the tests would be simpler just covering --batch-check, but I wanted to make sure we're checking that --batch output is consistent between the header and the content. The global-flag technique used here makes that easy to get right, but this is future-proofing us against regressions. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-05 20:36:07 +00:00
test_expect_success 'set up replacement object' '
orig=$(git rev-parse HEAD) &&
git cat-file commit $orig >orig &&
{
cat orig &&
echo extra
} >fake &&
fake=$(git hash-object -t commit -w fake) &&
orig_size=$(git cat-file -s $orig) &&
fake_size=$(git cat-file -s $fake) &&
git replace $orig $fake
'
test_expect_success 'cat-file --batch respects replace objects' '
git cat-file --batch >actual <<-EOF &&
$orig
EOF
{
echo "$orig commit $fake_size" &&
cat fake &&
echo
} >expect &&
test_cmp expect actual
'
test_expect_success 'cat-file --batch-check respects replace objects' '
git cat-file --batch-check >actual <<-EOF &&
$orig
EOF
echo "$orig commit $fake_size" >expect &&
test_cmp expect actual
'
# Pull the entry for object with oid "$1" out of the output of
# "cat-file --batch", including its object content (which requires
# parsing and reading a set amount of bytes, hence perl).
extract_batch_output () {
perl -ne '
BEGIN { $oid = shift }
if (/^$oid \S+ (\d+)$/) {
print;
read STDIN, my $buf, $1;
print $buf;
print "\n";
}
' "$@"
}
test_expect_success 'cat-file --batch-all-objects --batch ignores replace' '
git cat-file --batch-all-objects --batch >actual.raw &&
extract_batch_output $orig <actual.raw >actual &&
{
echo "$orig commit $orig_size" &&
cat orig &&
echo
} >expect &&
test_cmp expect actual
'
test_expect_success 'cat-file --batch-all-objects --batch-check ignores replace' '
git cat-file --batch-all-objects --batch-check >actual.raw &&
grep ^$orig actual.raw >actual &&
echo "$orig commit $orig_size" >expect &&
test_cmp expect actual
'
cat-file: add --batch-command mode Add a new flag --batch-command that accepts commands and arguments from stdin, similar to git-update-ref --stdin. At GitLab, we use a pair of long running cat-file processes when accessing object content. One for iterating over object metadata with --batch-check, and the other to grab object contents with --batch. However, if we had --batch-command, we wouldn't need to keep both processes around, and instead just have one --batch-command process where we can flip between getting object info, and getting object contents. Since we have a pair of cat-file processes per repository, this means we can get rid of roughly half of long lived git cat-file processes. Given there are many repositories being accessed at any given time, this can lead to huge savings. git cat-file --batch-command will enter an interactive command mode whereby the user can enter in commands and their arguments that get queued in memory: <command1> [arg1] [arg2] LF <command2> [arg1] [arg2] LF When --buffer mode is used, commands will be queued in memory until a flush command is issued that execute them: flush LF The reason for a flush command is that when a consumer process (A) talks to a git cat-file process (B) and interactively writes to and reads from it in --buffer mode, (A) needs to be able to control when the buffer is flushed to stdout. Currently, from (A)'s perspective, the only way is to either 1. kill (B)'s process 2. send an invalid object to stdin. 1. is not ideal from a performance perspective as it will require spawning a new cat-file process each time, and 2. is hacky and not a good long term solution. With this mechanism of queueing up commands and letting (A) issue a flush command, process (A) can control when the buffer is flushed and can guarantee it will receive all of the output when in --buffer mode. --batch-command also will not allow (B) to flush to stdout until a flush is received. This patch adds the basic structure for adding command which can be extended in the future to add more commands. It also adds the following two commands (on top of the flush command): contents <object> LF info <object> LF The contents command takes an <object> argument and prints out the object contents. The info command takes an <object> argument and prints out the object metadata. These can be used in the following way with --buffer: info <object> LF contents <object> LF contents <object> LF info <object> LF flush LF info <object> LF flush LF When used without --buffer: info <object> LF contents <object> LF contents <object> LF info <object> LF info <object> LF Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: John Cai <johncai86@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-02-18 18:23:14 +00:00
test_expect_success 'batch-command empty command' '
echo "" >cmd &&
test_expect_code 128 git cat-file --batch-command <cmd 2>err &&
grep "^fatal:.*empty command in input.*" err
'
test_expect_success 'batch-command whitespace before command' '
echo " info deadbeef" >cmd &&
test_expect_code 128 git cat-file --batch-command <cmd 2>err &&
grep "^fatal:.*whitespace before command.*" err
'
test_expect_success 'batch-command unknown command' '
echo unknown_command >cmd &&
test_expect_code 128 git cat-file --batch-command <cmd 2>err &&
grep "^fatal:.*unknown command.*" err
'
test_expect_success 'batch-command missing arguments' '
echo "info" >cmd &&
test_expect_code 128 git cat-file --batch-command <cmd 2>err &&
grep "^fatal:.*info requires arguments.*" err
'
test_expect_success 'batch-command flush with arguments' '
echo "flush arg" >cmd &&
test_expect_code 128 git cat-file --batch-command --buffer <cmd 2>err &&
grep "^fatal:.*flush takes no arguments.*" err
'
test_expect_success 'batch-command flush without --buffer' '
echo "flush" >cmd &&
test_expect_code 128 git cat-file --batch-command <cmd 2>err &&
grep "^fatal:.*flush is only for --buffer mode.*" err
'
cat-file: disable refs/replace with --batch-all-objects When we're enumerating all objects in the object database, it doesn't make sense to respect refs/replace. The point of this option is to enumerate all of the objects in the database at a low level. By definition we'd already show the replacement object's contents (under its real oid), and showing those contents under another oid is almost certainly working against what the user is trying to do. Note that you could make the same argument for something like: git show-index <foo.idx | awk '{print $2}' | git cat-file --batch but there we can't know in cat-file exactly what the user intended, because we don't know the source of the input. They could be trying to do low-level debugging, or they could be doing something more high-level (e.g., imagine a porcelain built around cat-file for its object accesses). So in those cases, we'll have to rely on the user specifying "git --no-replace-objects" to tell us what to do. One _could_ make an argument that "cat-file --batch" is sufficiently low-level plumbing that it should not respect replace-objects at all (and the caller should do any replacement if they want it). But we have been doing so for some time. The history is a little tangled: - looking back as far as v1.6.6, we would not respect replace refs for --batch-check, but would for --batch (because the former used sha1_object_info(), and the replace mechanism only affected actual object reads) - this discrepancy was made even weirder by 98e2092b50 (cat-file: teach --batch to stream blob objects, 2013-07-10), where we always output the header using the --batch-check code, and then printed the object separately. This could lead to "cat-file --batch" dying (when it notices the size or type changed for a non-blob object) or even producing bogus output (in streaming mode, we didn't notice that we wrote the wrong number of bytes). - that persisted until 1f7117ef7a (sha1_file: perform object replacement in sha1_object_info_extended(), 2013-12-11), which then respected replace refs for both forms. So it has worked reliably this way for over 7 years, and we should make sure it continues to do so. That could also be an argument that --batch-all-objects should not change behavior (which this patch is doing), but I really consider the current behavior to be an unintended bug. It's a side effect of how the code is implemented (feeding the oids back into oid_object_info() rather than looking at what we found while reading the loose and packed object storage). The implementation is straight-forward: we just disable the global read_replace_refs flag when we're in --batch-all-objects mode. It would perhaps be a little cleaner to change the flag we pass to oid_object_info_extended(), but that's not enough. We also read objects via read_object_file() and stream_blob_to_fd(). The former could switch to its _extended() form, but the streaming code has no mechanism for disabling replace refs. Setting the global flag works, and as a bonus, it's impossible to have any "oops, we're sometimes replacing the object and sometimes not" bugs in the output (like the ones caused by 98e2092b50 above). The tests here cover the regular-input and --batch-all-objects cases, for both --batch-check and --batch. There is a test in t6050 that covers the regular-input case with --batch already, but this new one goes much further in actually verifying the output (plus covering --batch-check explicitly). This is perhaps a little overkill and the tests would be simpler just covering --batch-check, but I wanted to make sure we're checking that --batch output is consistent between the header and the content. The global-flag technique used here makes that easy to get right, but this is future-proofing us against regressions. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-05 20:36:07 +00:00
test_done