If the package is already installed, we need to check if it is in the
repos to see if it aplies to rebuild tree. Normally alpm will not prompt
us to select a provider if we already have one installed. An exception
comes up when we have a provider installed that is from the AUR. In this
case FindSatisfier() still asks us to select a provider.
Now make sure to never to never show the menu if the package exists in
the local repo.
Previous default SigLevels caused 3rd party databases to take a very long time to
load and also to not load properly. Probably due to missing keys(?).
Pacman takes a long time to check the databases. For now, always set to
SigLevel 0 like how go-alpm did in its config parsing. Needs more
looking into for a proper fix.
This moves the config parsing from out of alpm and into the
go-pacmanconf libary plus some boilerplate code to get it into our alpm
config.
This makes sense as many config options such as UseColor and CleanMethod
have nothing to do with alpm and only relate to pacman.
pacman-conf is used instead of direct config parsing. This tool resolves
defaults and includes for us, so we don't need to handle it.
It is now safe to drop all the config parsing from go-alpm.
The main reason behind this is for future localisation. yes and no can
be set to the localized equivalent and it should just work.
This Refactor also changes the function in ways which make it much less
confusing.
The param is no longer reversed and changed to a boolean. Before you had
to pass in Yy to get a default of no and vice versa.
The function now retuens false for no and true for yes. Before it would
return true if the default option was choosen.
Currently When performing a system upgrade, Yay will first refresh the
database then perform the repo and AUR upgrade. This allows Yay to add
some features such as better batch interaction, showing potential
dependency problems before the upgrade starts and combined menus
showing AUR and repo upgrades together.
There has been discussion that this approach is a bad idea. The main issue
people have is that the separation of the database refresh and the upgrade
could lead to a partial upgrade if Yay fails between the two stages.
Personally I do not like this argument, there are valid reasons to Yay
to fail between these points. For example there may be dependency or
conflict issues during the AUR upgrade. Yay can detect these before any
installing actually starts and exit, just like how pacman will when
there are dependency problems.
If Yay does fail between these points, for the previously mentioned
reasons or even a crash then a simple refresh will not cause a
partial upgrade by itself. It is then the user's responsibility
to either resolve these issues or instead perform an upgrade using
pacman directly.
My opinions aside, The discussions on the Arch wiki has reached
a decision, this method is not recommended. So to follow the decided
best practises this behaviour has been disabled by default.
This behaviour can be toggled using the --[no]combinedupgrade flag
It should be noted that Yay's upgrade menu will not show repo packages
unless --combinedupgrade is used.
--ask is no longer used when installing AUR packages, instead pass no
confirm when we know there are no conflicts and wait for manual
confirmation when there are.
This means that when there are no conflicts there should be no change in
behaviour and the user will not need to intervene at all.
The old behaviour can still be used with --useask.
Following the improvements in #480, #485, #486, a tiny bit of cleanup for a lone, forgotten line.
Plus the typo had been bugging me since I first saw it.
Clean build needs to happen before downloading pkgbuilds so that they
can be deletd before downloading.
Editing and diff viewing needs to happen after downloading the
pkgbuilds.
Prevously we asked to clean and edit at the same time. Then clean,
download pkgbuilds and open the editor.
This poeses a problem for diff viewing and editing. It's likley that the
user will see the diff and use that to decide if they want to edit the
pkgbuild. Using the current method, the user will be asked to view diffs
and edit before actually seeing any diffs.
Instead split cleaning diff showing and editing to three seperate menus
in the following order:
show clean menu
clean
download pkgbuilds
show diff menu
show diffs
show edit menu
edit pkgbuilds
Also each menu is seperatly enableable. By default only the diff menu is
shows. If the user wishes to clean build, edit pkgbuilds or disable
diffs then the user can use the --[no]{clean,diff,edit}menu flags. This
replaces the --[no]showdiffs flags.
diff viewing can be toggled via --[no]showdiffs. When enabled diffs will
be shown for packages between the current HEAD and upstream's HEAD.
Packages downloaded via tarballs will be shown in full using the editor
git diff is used to show diffs. Therefore the pager for diffs can be
set via the PAGER and GIT_PAGER enviroment variables.
These flags limit operations to only check the repos or only check the
AUR. These flags apply to -S, -Si and -Su.
-a may also be used as a short option for --aur. --repo has no short
option as -r is taken.
Ensure aurWarnings will always be printed out in one block
use '->' for printing aur warnings and ignored upgrades
use '->' for conflict printing
use '->' for key importing
Say PGP keys not GPG keys
Add back green for input prompts
Use 4 spcaces over \t
Before `yay -Syu` called `pacman -Sy <pkgs to upgrade>`
We then later switched to it calling `pacman -Syu` this lead to yay
seeing no targets to when it was upgrading a bunch of packages it
assumed they must be deps. Correct this by adding repo packages to the
targets list.
Also ensure we dont mark packages as dependencies if they are already
installed. For example we install `foo` which requires `bar>5` but we
only have `bar=4` installed. In this case installing `foo` will pull bar
in as a dependency but it should not be marked as such because it
already exists.
This means that menus are now printed in noconfirm mode, I don't see
this as a problem because Pacman still prints its questions during
noconfirm.
When the user has edited pkgbuilds Yay will prompt if they want to
continue with the intall. This prompt is also enabled during noconfirm
to ensure the user is happy with the pkgbuilds.
Similar to the --redownload flag, when specifed targets will be rebuilt
even if an up to date version is cached. --rebuildall can be used to
ensure uninstalled dependencies are rebuilt as well.
Additionally, unlike --redownload there is also --rebuildtree. This
causes a rebuild and reinstall of a package and all of it's dependencies
recursivley. This is designed for when a libary updae, breaks an
installed AUR package due to a partial upgrade. polybar is a common
example
--rebuild allows you to easily skip the cache and rebuild against a newer
libary version. --rebuildtree is a more nuclear option where you can
rebuild the whole dependency tree.
When building a package from the AUR for which there are missing keys,
yay will now prompt the user whether it should try to import such keys
using gpg:
[...]
:: Parsing SRCINFO (1/3): libc++ (libc++abi libc++)
:: Parsing SRCINFO (2/3): aurutils
:: Parsing SRCINFO (3/3): cower
==> GPG keys need importing:
487EACC08557AD082088DABA1EB2638FF56C0C53, required by: cower
11E521D646982372EB577A1F8F0871F202119294, required by: libc++ (libc++abi libc++)
B6C8F98282B944E3B0D5C2530FC3042E345AD05D, required by: libc++ (libc++abi libc++)
DBE7D3DD8C81D58D0A13D0E76BC26A17B9B7018A, required by: aurutils
==> Import? [Y/n]
[...]
Default is to try to import the problematic keys ([Y/n]).
Use cacheHome for builddir instead of hardcoding ~/.cache
Use the command names in config.*Bin options.
For example PacmanBin is changed to just "pacman" this means yay will
call the pacman commit in PATH. If the user wants to use a different
binary they can still specify a full path in the config.
Before setting options such as --topdown would be saved to the config
file automaticly when used. Now this is no longer done by default and
isntead the --save flag must be passed for this to happen.
If --save is passed the config is now saved as soon as the argument
parsing is finished apposed to before where it was saved when yay exits.
This means that config changes will now apply if the user does a ^C
before yay finishes.
If a pkgbuild is already in cache and matches the version on
the aur skip the download.
The version we check comes from the .SRCINFO file on disk which is never
updated. (updates through pkgver() edit the pkgbuild but do not effect
the .SRCINFO). Therefore if the the version of the .SRCINFO matches the
AUR's version there must not be an update.
In the case of the on disk version being newer than the AUR version we
can assume user interaction and they probably do not want it overwitten
so in that case also skip the download.
Use the command `git ls-remote <url> <branch>` to track devel updates
rather than relying on the GitHub API.
This allows devel update to work for every git based source and
elimantes the rate limiting from GitHub.
The yay_vcs.json format has changed to better support packages which
multiple vcs sources and to track the protocols each source uses. And
track the branch that each source tracks in it's fragment.
Add ( and ) to "installed" to match groups and out of date
Show popularity as well as voted in yogurt mode
Show download and install size in yogurt mode
Remove printing of white and black
Fix incorrect message on number menu
Yellow is now almost never used
Use `v` instead of `r` when printing version
show when a page was marked out of date on search and info
Save the VSC Info as soon as the package install finishes. This should
ensure the VSC db does not end up in an incorrect state if an install
fails or is cancelled by the user.
This also adds better support for split packages. When one or more
packages are installed from the same base each individual package is
added to the db not just the base. This allows us to track individual
updates from the same base so that if one package gets updated we don't
assume all packages in the base are updated.
Options such as --devel are now striped from the parser before handling
the command but the option is still processed so that config.devel would
be true.
Also changed `changedConfig` to a global in config.go
passToPacman now takes and argParser as a paramater. And is implemented
for the simple cases in cmd.go. Although passToPacman is now left non
working in places which still try to usr the old call format and will
need to be reimplemented.
