This means that menus are now printed in noconfirm mode, I don't see
this as a problem because Pacman still prints its questions during
noconfirm.
When the user has edited pkgbuilds Yay will prompt if they want to
continue with the intall. This prompt is also enabled during noconfirm
to ensure the user is happy with the pkgbuilds.
To know what AUR packages need updating a rpc request is needed for all
packages. The dep tree is designed to cache everything to minimize the
amount of rpc requests. The downside of this is the dep tree ends up
with all sorts of packages in cache that it doesn't need. Then the
deptree tries to resolve deps for all of thoes packages.
By spliting the sysupgrade from the dep tree this stops this from
happening, it uses one more rpc request but also may lower the amount of
total rpc requests needed lated on.
This fixes a couple of tiny bugs such as triggering providers prompts
and printing AUR out of date messages for packages that are not going
to be installed.
This also fixes another display bug where repo packages from -Su would
not apear when printing the packages to be installed under [Repo].
--redownload is meant to only download the targets the user provides.
If the user enters aur/foo then Yay will find the package foo from the
aur, --redownload will see thats not what the user entered and skips the
download.
This makes it so after the dep searching is done, all db/ prefixes are
dropped.
This commit extends the conflict checking a lot, it adds support for:
Conflicting with provides as well as actual package names
Reverse conflicts
Inner conflicts
Both normal conflicts and inner conflicts are run in parallel.
Messages are now printing when checking conflicts.
This also fixes packages sometimes being listed as conflicting with
themselves.
The inner conflict is a little verbose and could be toned down a little
but I am insure exactly how to tone it down.
Previosly during `yay -Su` Yay would pass
`pacman -S <packages that need upgrade>` to pacman.
Instead pass `pacman -Su --ignore <number menu choices>`
This allows yay to handle replaces and package downgrades `-Suu`
When pkgbuilds are built by makepkg, if the pkgbuild's arch=() array
does not include the current carch set in makepkg.conf, makepkg will
fail to build the package.
Now, Yay detects if a pkgbuild does not support the arch set in
pacman.conf Yay will ask the user about this and ask them if they want
to build anyway, passing `--ignorearch` to makepkg.`
Note that Yay will check against the arch set in pacman.conf which is
what pacman uses to only allow installs of package of that arch. makepkg
will still use carch set in makepkg.conf to build packages. These two
values are expected to be the same otherwise Yay will fail.
The on disk .srcinfo is needed for this as the user should be asked pre
source download. This and pgp checking both use the on disk .srcinfo so
it is no longer a one off. Store the 'stale' srcinfos so they can be
accesed by both functions.
Fix typo where adding to has instead of depStrings
Error correcly when missing packages
Also handle cases where a package is provided multiple times. If one
package provies `foo=1` and another provides `foo=2` before the latter
would just overide the former version. Now both versions will be checked
against.
With the addition of pgp key checking in Yay, the srcinfo parsing was
moved to before the pkgver() bump, leading to outdated pkgbuild
information.
Srcinfo parsing must be done after the pkgver() bump
The pkgver() bump must be done after downloading sources
makepkg's PGP checking is done as the sources download
yays PGP importing requires the srcingo to be parsed
Quite the chicken and egg problem
It is possible to skip the integ checks after the sources download
then parse the srcinfo
do the yay PGP check
then run the integ checks
the problem here is that to generate the srcinfo `makepkg --printsrcingo` is ran
This causes the pkgbuild to be sourced which I am not comftable with
doing without the integ checks.
Instead we parse the on disk .SRRCINFO that downloads with the PKGBUILD
just for the PGP checking. Later on we parse a fresh srcinfo straight
from `makepkg --printsrcingo`. This is a little bit less efficient but
more secure than the other option.
The callback is set to allways silently say yes, When passing to pacman
for the intall pacman will then ask the question giving the user
a chance to answer.
Similar to the --redownload flag, when specifed targets will be rebuilt
even if an up to date version is cached. --rebuildall can be used to
ensure uninstalled dependencies are rebuilt as well.
Additionally, unlike --redownload there is also --rebuildtree. This
causes a rebuild and reinstall of a package and all of it's dependencies
recursivley. This is designed for when a libary updae, breaks an
installed AUR package due to a partial upgrade. polybar is a common
example
--rebuild allows you to easily skip the cache and rebuild against a newer
libary version. --rebuildtree is a more nuclear option where you can
rebuild the whole dependency tree.
When building a package from the AUR for which there are missing keys,
yay will now prompt the user whether it should try to import such keys
using gpg:
[...]
:: Parsing SRCINFO (1/3): libc++ (libc++abi libc++)
:: Parsing SRCINFO (2/3): aurutils
:: Parsing SRCINFO (3/3): cower
==> GPG keys need importing:
487EACC08557AD082088DABA1EB2638FF56C0C53, required by: cower
11E521D646982372EB577A1F8F0871F202119294, required by: libc++ (libc++abi libc++)
B6C8F98282B944E3B0D5C2530FC3042E345AD05D, required by: libc++ (libc++abi libc++)
DBE7D3DD8C81D58D0A13D0E76BC26A17B9B7018A, required by: aurutils
==> Import? [Y/n]
[...]
Default is to try to import the problematic keys ([Y/n]).
Adds the ability to pick which database to install a package from. This
is extended to also support for AUR packages. For example `extra/git`
and `aur/yay` should both work`. When not explicitly requesting
a database repo packages will be choosen over the AUR.
This features extends to yogurt mode, listings where a package shows up
in multiple database/the AUR is now handled.
The aur does not have a real pacman databse like core, extra ect. But
can be accessed as if was one with `aur/name`. Using Yay with a pacman
repository named "aur" is undefined.
If a pkgbuild is already in cache and matches the version on
the aur skip the download.
The version we check comes from the .SRCINFO file on disk which is never
updated. (updates through pkgver() edit the pkgbuild but do not effect
the .SRCINFO). Therefore if the the version of the .SRCINFO matches the
AUR's version there must not be an update.
In the case of the on disk version being newer than the AUR version we
can assume user interaction and they probably do not want it overwitten
so in that case also skip the download.
Use the command `git ls-remote <url> <branch>` to track devel updates
rather than relying on the GitHub API.
This allows devel update to work for every git based source and
elimantes the rate limiting from GitHub.
The yay_vcs.json format has changed to better support packages which
multiple vcs sources and to track the protocols each source uses. And
track the branch that each source tracks in it's fragment.
In a very specific case where the user runs `yay -Syu` then uses the
number menu to ignore all AUR upgrades after the Repo install the user
will still be prompted to install and download packages.
Add ( and ) to "installed" to match groups and out of date
Show popularity as well as voted in yogurt mode
Show download and install size in yogurt mode
Remove printing of white and black
Fix incorrect message on number menu
Yellow is now almost never used
Use `v` instead of `r` when printing version
show when a page was marked out of date on search and info
